Steven Toth | 443c1228 | 2009-05-09 21:17:28 -0300 | [diff] [blame] | 1 | /* |
| 2 | * Driver for the NXP SAA7164 PCIe bridge |
| 3 | * |
| 4 | * Copyright (c) 2009 Steven Toth <stoth@kernellabs.com> |
| 5 | * |
| 6 | * This program is free software; you can redistribute it and/or modify |
| 7 | * it under the terms of the GNU General Public License as published by |
| 8 | * the Free Software Foundation; either version 2 of the License, or |
| 9 | * (at your option) any later version. |
| 10 | * |
| 11 | * This program is distributed in the hope that it will be useful, |
| 12 | * but WITHOUT ANY WARRANTY; without even the implied warranty of |
| 13 | * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the |
| 14 | * |
| 15 | * GNU General Public License for more details. |
| 16 | * |
| 17 | * You should have received a copy of the GNU General Public License |
| 18 | * along with this program; if not, write to the Free Software |
| 19 | * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. |
| 20 | */ |
| 21 | |
| 22 | #include <linux/wait.h> |
| 23 | |
| 24 | #include "saa7164.h" |
| 25 | |
| 26 | int saa7164_api_transition_port(struct saa7164_tsport *port, u8 mode) |
| 27 | { |
| 28 | int ret; |
| 29 | |
| 30 | ret = saa7164_cmd_send(port->dev, port->hwcfg.unitid, SET_CUR, |
| 31 | SAA_STATE_CONTROL, sizeof(mode), &mode); |
| 32 | if (ret != SAA_OK) |
| 33 | printk(KERN_ERR "%s() error, ret = 0x%x\n", __func__, ret); |
| 34 | |
| 35 | return ret; |
| 36 | } |
| 37 | |
| 38 | int saa7164_api_get_fw_version(struct saa7164_dev *dev, u32 *version) |
| 39 | { |
| 40 | int ret; |
| 41 | |
| 42 | ret = saa7164_cmd_send(dev, 0, GET_CUR, |
| 43 | GET_FW_VERSION_CONTROL, sizeof(u32), version); |
| 44 | if (ret != SAA_OK) |
| 45 | printk(KERN_ERR "%s() error, ret = 0x%x\n", __func__, ret); |
| 46 | |
| 47 | return ret; |
| 48 | } |
| 49 | |
| 50 | int saa7164_api_read_eeprom(struct saa7164_dev *dev, u8 *buf, int buflen) |
| 51 | { |
| 52 | u8 reg[] = { 0x0f, 0x00 }; |
| 53 | |
| 54 | if (buflen < 128) |
| 55 | return -ENOMEM; |
| 56 | |
| 57 | /* Assumption: Hauppauge eeprom is at 0xa0 on on bus 0 */ |
| 58 | /* TODO: Pull the details from the boards struct */ |
| 59 | return saa7164_api_i2c_read(&dev->i2c_bus[0], 0xa0 >> 1, sizeof(reg), |
| 60 | ®[0], 128, buf); |
| 61 | } |
| 62 | |
Steven Toth | 443c1228 | 2009-05-09 21:17:28 -0300 | [diff] [blame] | 63 | |
| 64 | int saa7164_api_configure_port_mpeg2ts(struct saa7164_dev *dev, |
| 65 | struct saa7164_tsport *port, |
| 66 | tmComResTSFormatDescrHeader_t *tsfmt) |
| 67 | { |
| 68 | dprintk(DBGLVL_API, " bFormatIndex = 0x%x\n", tsfmt->bFormatIndex); |
| 69 | dprintk(DBGLVL_API, " bDataOffset = 0x%x\n", tsfmt->bDataOffset); |
| 70 | dprintk(DBGLVL_API, " bPacketLength= 0x%x\n", tsfmt->bPacketLength); |
| 71 | dprintk(DBGLVL_API, " bStrideLength= 0x%x\n", tsfmt->bStrideLength); |
| 72 | dprintk(DBGLVL_API, " bguid = (....)\n"); |
| 73 | |
| 74 | /* Cache the hardware configuration in the port */ |
| 75 | |
| 76 | port->bufcounter = port->hwcfg.BARLocation; |
| 77 | port->pitch = port->hwcfg.BARLocation + (2 * sizeof(u32)); |
| 78 | port->bufsize = port->hwcfg.BARLocation + (3 * sizeof(u32)); |
| 79 | port->bufoffset = port->hwcfg.BARLocation + (4 * sizeof(u32)); |
| 80 | port->bufptr32l = port->hwcfg.BARLocation + |
| 81 | (4 * sizeof(u32)) + |
| 82 | (sizeof(u32) * port->hwcfg.buffercount) + sizeof(u32); |
| 83 | port->bufptr32h = port->hwcfg.BARLocation + |
| 84 | (4 * sizeof(u32)) + |
| 85 | (sizeof(u32) * port->hwcfg.buffercount); |
| 86 | port->bufptr64 = port->hwcfg.BARLocation + |
| 87 | (4 * sizeof(u32)) + |
| 88 | (sizeof(u32) * port->hwcfg.buffercount); |
| 89 | dprintk(DBGLVL_API, " = port->hwcfg.BARLocation = 0x%x\n", |
| 90 | port->hwcfg.BARLocation); |
| 91 | |
| 92 | dprintk(DBGLVL_API, " = VS_FORMAT_MPEGTS (becomes dev->ts[%d])\n", |
| 93 | port->nr); |
| 94 | |
| 95 | return 0; |
| 96 | } |
| 97 | |
| 98 | int saa7164_api_dump_subdevs(struct saa7164_dev *dev, u8 *buf, int len) |
| 99 | { |
| 100 | struct saa7164_tsport *port = 0; |
| 101 | u32 idx, next_offset; |
| 102 | int i; |
| 103 | tmComResDescrHeader_t *hdr, *t; |
| 104 | tmComResExtDevDescrHeader_t *exthdr; |
| 105 | tmComResPathDescrHeader_t *pathhdr; |
| 106 | tmComResAntTermDescrHeader_t *anttermhdr; |
| 107 | tmComResTunerDescrHeader_t *tunerunithdr; |
| 108 | tmComResDMATermDescrHeader_t *vcoutputtermhdr; |
| 109 | tmComResTSFormatDescrHeader_t *tsfmt; |
| 110 | u32 currpath = 0; |
| 111 | |
| 112 | dprintk(DBGLVL_API, |
Steven Toth | 207b42c | 2009-05-09 21:30:05 -0300 | [diff] [blame] | 113 | "%s(?,?,%d) sizeof(tmComResDescrHeader_t) = %d bytes\n", |
| 114 | __func__, len, (u32)sizeof(tmComResDescrHeader_t)); |
Steven Toth | 443c1228 | 2009-05-09 21:17:28 -0300 | [diff] [blame] | 115 | |
| 116 | for (idx = 0; idx < (len - sizeof(tmComResDescrHeader_t)); ) { |
| 117 | |
| 118 | hdr = (tmComResDescrHeader_t *)(buf + idx); |
| 119 | |
| 120 | if (hdr->type != CS_INTERFACE) |
| 121 | return SAA_ERR_NOT_SUPPORTED; |
| 122 | |
| 123 | dprintk(DBGLVL_API, "@ 0x%x = \n", idx); |
| 124 | switch (hdr->subtype) { |
| 125 | case GENERAL_REQUEST: |
| 126 | dprintk(DBGLVL_API, " GENERAL_REQUEST\n"); |
| 127 | break; |
| 128 | case VC_TUNER_PATH: |
| 129 | dprintk(DBGLVL_API, " VC_TUNER_PATH\n"); |
| 130 | pathhdr = (tmComResPathDescrHeader_t *)(buf + idx); |
| 131 | dprintk(DBGLVL_API, " pathid = 0x%x\n", |
| 132 | pathhdr->pathid); |
| 133 | currpath = pathhdr->pathid; |
| 134 | break; |
| 135 | case VC_INPUT_TERMINAL: |
| 136 | dprintk(DBGLVL_API, " VC_INPUT_TERMINAL\n"); |
| 137 | anttermhdr = |
| 138 | (tmComResAntTermDescrHeader_t *)(buf + idx); |
| 139 | dprintk(DBGLVL_API, " terminalid = 0x%x\n", |
| 140 | anttermhdr->terminalid); |
| 141 | dprintk(DBGLVL_API, " terminaltype = 0x%x\n", |
| 142 | anttermhdr->terminaltype); |
| 143 | switch (anttermhdr->terminaltype) { |
| 144 | case ITT_ANTENNA: |
| 145 | dprintk(DBGLVL_API, " = ITT_ANTENNA\n"); |
| 146 | break; |
| 147 | case LINE_CONNECTOR: |
| 148 | dprintk(DBGLVL_API, " = LINE_CONNECTOR\n"); |
| 149 | break; |
| 150 | case SPDIF_CONNECTOR: |
| 151 | dprintk(DBGLVL_API, " = SPDIF_CONNECTOR\n"); |
| 152 | break; |
| 153 | case COMPOSITE_CONNECTOR: |
| 154 | dprintk(DBGLVL_API, |
| 155 | " = COMPOSITE_CONNECTOR\n"); |
| 156 | break; |
| 157 | case SVIDEO_CONNECTOR: |
| 158 | dprintk(DBGLVL_API, " = SVIDEO_CONNECTOR\n"); |
| 159 | break; |
| 160 | case COMPONENT_CONNECTOR: |
| 161 | dprintk(DBGLVL_API, |
| 162 | " = COMPONENT_CONNECTOR\n"); |
| 163 | break; |
| 164 | case STANDARD_DMA: |
| 165 | dprintk(DBGLVL_API, " = STANDARD_DMA\n"); |
| 166 | break; |
| 167 | default: |
| 168 | dprintk(DBGLVL_API, " = undefined (0x%x)\n", |
| 169 | anttermhdr->terminaltype); |
| 170 | } |
| 171 | dprintk(DBGLVL_API, " assocterminal= 0x%x\n", |
| 172 | anttermhdr->assocterminal); |
| 173 | dprintk(DBGLVL_API, " iterminal = 0x%x\n", |
| 174 | anttermhdr->iterminal); |
| 175 | dprintk(DBGLVL_API, " controlsize = 0x%x\n", |
| 176 | anttermhdr->controlsize); |
| 177 | break; |
| 178 | case VC_OUTPUT_TERMINAL: |
| 179 | dprintk(DBGLVL_API, " VC_OUTPUT_TERMINAL\n"); |
| 180 | vcoutputtermhdr = |
| 181 | (tmComResDMATermDescrHeader_t *)(buf + idx); |
| 182 | dprintk(DBGLVL_API, " unitid = 0x%x\n", |
| 183 | vcoutputtermhdr->unitid); |
| 184 | dprintk(DBGLVL_API, " terminaltype = 0x%x\n", |
| 185 | vcoutputtermhdr->terminaltype); |
| 186 | switch (vcoutputtermhdr->terminaltype) { |
| 187 | case ITT_ANTENNA: |
| 188 | dprintk(DBGLVL_API, " = ITT_ANTENNA\n"); |
| 189 | break; |
| 190 | case LINE_CONNECTOR: |
| 191 | dprintk(DBGLVL_API, " = LINE_CONNECTOR\n"); |
| 192 | break; |
| 193 | case SPDIF_CONNECTOR: |
| 194 | dprintk(DBGLVL_API, " = SPDIF_CONNECTOR\n"); |
| 195 | break; |
| 196 | case COMPOSITE_CONNECTOR: |
| 197 | dprintk(DBGLVL_API, |
| 198 | " = COMPOSITE_CONNECTOR\n"); |
| 199 | break; |
| 200 | case SVIDEO_CONNECTOR: |
| 201 | dprintk(DBGLVL_API, " = SVIDEO_CONNECTOR\n"); |
| 202 | break; |
| 203 | case COMPONENT_CONNECTOR: |
| 204 | dprintk(DBGLVL_API, |
| 205 | " = COMPONENT_CONNECTOR\n"); |
| 206 | break; |
| 207 | case STANDARD_DMA: |
| 208 | dprintk(DBGLVL_API, " = STANDARD_DMA\n"); |
| 209 | break; |
| 210 | default: |
| 211 | dprintk(DBGLVL_API, " = undefined (0x%x)\n", |
| 212 | vcoutputtermhdr->terminaltype); |
| 213 | } |
| 214 | dprintk(DBGLVL_API, " assocterminal= 0x%x\n", |
| 215 | vcoutputtermhdr->assocterminal); |
| 216 | dprintk(DBGLVL_API, " sourceid = 0x%x\n", |
| 217 | vcoutputtermhdr->sourceid); |
| 218 | dprintk(DBGLVL_API, " iterminal = 0x%x\n", |
| 219 | vcoutputtermhdr->iterminal); |
| 220 | dprintk(DBGLVL_API, " BARLocation = 0x%x\n", |
| 221 | vcoutputtermhdr->BARLocation); |
| 222 | dprintk(DBGLVL_API, " flags = 0x%x\n", |
| 223 | vcoutputtermhdr->flags); |
| 224 | dprintk(DBGLVL_API, " interruptid = 0x%x\n", |
| 225 | vcoutputtermhdr->interruptid); |
| 226 | dprintk(DBGLVL_API, " buffercount = 0x%x\n", |
| 227 | vcoutputtermhdr->buffercount); |
| 228 | dprintk(DBGLVL_API, " metadatasize = 0x%x\n", |
| 229 | vcoutputtermhdr->metadatasize); |
| 230 | dprintk(DBGLVL_API, " controlsize = 0x%x\n", |
| 231 | vcoutputtermhdr->controlsize); |
| 232 | dprintk(DBGLVL_API, " numformats = 0x%x\n", |
| 233 | vcoutputtermhdr->numformats); |
| 234 | |
| 235 | t = (tmComResDescrHeader_t *) |
| 236 | ((tmComResDMATermDescrHeader_t *)(buf + idx)); |
| 237 | next_offset = idx + (vcoutputtermhdr->len); |
| 238 | for (i = 0; i < vcoutputtermhdr->numformats; i++) { |
| 239 | t = (tmComResDescrHeader_t *) |
| 240 | (buf + next_offset); |
| 241 | switch (t->subtype) { |
| 242 | case VS_FORMAT_MPEG2TS: |
| 243 | tsfmt = |
| 244 | (tmComResTSFormatDescrHeader_t *)t; |
| 245 | if (currpath == 1) |
| 246 | port = &dev->ts1; |
| 247 | else |
| 248 | port = &dev->ts2; |
| 249 | memcpy(&port->hwcfg, vcoutputtermhdr, |
| 250 | sizeof(*vcoutputtermhdr)); |
| 251 | saa7164_api_configure_port_mpeg2ts(dev, |
| 252 | port, tsfmt); |
| 253 | break; |
| 254 | case VS_FORMAT_MPEG2PS: |
| 255 | dprintk(DBGLVL_API, |
| 256 | " = VS_FORMAT_MPEG2PS\n"); |
| 257 | break; |
| 258 | case VS_FORMAT_VBI: |
| 259 | dprintk(DBGLVL_API, |
| 260 | " = VS_FORMAT_VBI\n"); |
| 261 | break; |
| 262 | case VS_FORMAT_RDS: |
| 263 | dprintk(DBGLVL_API, |
| 264 | " = VS_FORMAT_RDS\n"); |
| 265 | break; |
| 266 | case VS_FORMAT_UNCOMPRESSED: |
| 267 | dprintk(DBGLVL_API, |
| 268 | " = VS_FORMAT_UNCOMPRESSED\n"); |
| 269 | break; |
| 270 | case VS_FORMAT_TYPE: |
| 271 | dprintk(DBGLVL_API, |
| 272 | " = VS_FORMAT_TYPE\n"); |
| 273 | break; |
| 274 | default: |
| 275 | dprintk(DBGLVL_API, |
| 276 | " = undefined (0x%x)\n", |
| 277 | t->subtype); |
| 278 | } |
| 279 | next_offset += t->len; |
| 280 | } |
| 281 | |
| 282 | break; |
| 283 | case TUNER_UNIT: |
| 284 | dprintk(DBGLVL_API, " TUNER_UNIT\n"); |
| 285 | tunerunithdr = |
| 286 | (tmComResTunerDescrHeader_t *)(buf + idx); |
| 287 | dprintk(DBGLVL_API, " unitid = 0x%x\n", |
| 288 | tunerunithdr->unitid); |
| 289 | dprintk(DBGLVL_API, " sourceid = 0x%x\n", |
| 290 | tunerunithdr->sourceid); |
| 291 | dprintk(DBGLVL_API, " iunit = 0x%x\n", |
| 292 | tunerunithdr->iunit); |
| 293 | dprintk(DBGLVL_API, " tuningstandards = 0x%x\n", |
| 294 | tunerunithdr->tuningstandards); |
| 295 | dprintk(DBGLVL_API, " controlsize = 0x%x\n", |
| 296 | tunerunithdr->controlsize); |
| 297 | dprintk(DBGLVL_API, " controls = 0x%x\n", |
| 298 | tunerunithdr->controls); |
| 299 | break; |
| 300 | case VC_SELECTOR_UNIT: |
| 301 | dprintk(DBGLVL_API, " VC_SELECTOR_UNIT\n"); |
| 302 | break; |
| 303 | case VC_PROCESSING_UNIT: |
| 304 | dprintk(DBGLVL_API, " VC_PROCESSING_UNIT\n"); |
| 305 | break; |
| 306 | case FEATURE_UNIT: |
| 307 | dprintk(DBGLVL_API, " FEATURE_UNIT\n"); |
| 308 | break; |
| 309 | case ENCODER_UNIT: |
| 310 | dprintk(DBGLVL_API, " ENCODER_UNIT\n"); |
| 311 | break; |
| 312 | case EXTENSION_UNIT: |
| 313 | dprintk(DBGLVL_API, " EXTENSION_UNIT\n"); |
| 314 | exthdr = (tmComResExtDevDescrHeader_t *)(buf + idx); |
| 315 | dprintk(DBGLVL_API, " unitid = 0x%x\n", |
| 316 | exthdr->unitid); |
| 317 | dprintk(DBGLVL_API, " deviceid = 0x%x\n", |
| 318 | exthdr->deviceid); |
| 319 | dprintk(DBGLVL_API, " devicetype = 0x%x\n", |
| 320 | exthdr->devicetype); |
| 321 | if (exthdr->devicetype & 0x1) |
| 322 | dprintk(DBGLVL_API, " = Decoder Device\n"); |
| 323 | if (exthdr->devicetype & 0x2) |
| 324 | dprintk(DBGLVL_API, " = GPIO Source\n"); |
| 325 | if (exthdr->devicetype & 0x4) |
| 326 | dprintk(DBGLVL_API, " = Video Decoder\n"); |
| 327 | if (exthdr->devicetype & 0x8) |
| 328 | dprintk(DBGLVL_API, " = Audio Decoder\n"); |
| 329 | if (exthdr->devicetype & 0x20) |
| 330 | dprintk(DBGLVL_API, " = Crossbar\n"); |
| 331 | if (exthdr->devicetype & 0x40) |
| 332 | dprintk(DBGLVL_API, " = Tuner\n"); |
| 333 | if (exthdr->devicetype & 0x80) |
| 334 | dprintk(DBGLVL_API, " = IF PLL\n"); |
| 335 | if (exthdr->devicetype & 0x100) |
| 336 | dprintk(DBGLVL_API, " = Demodulator\n"); |
| 337 | if (exthdr->devicetype & 0x200) |
| 338 | dprintk(DBGLVL_API, " = RDS Decoder\n"); |
| 339 | if (exthdr->devicetype & 0x400) |
| 340 | dprintk(DBGLVL_API, " = Encoder\n"); |
| 341 | if (exthdr->devicetype & 0x800) |
| 342 | dprintk(DBGLVL_API, " = IR Decoder\n"); |
| 343 | if (exthdr->devicetype & 0x1000) |
| 344 | dprintk(DBGLVL_API, " = EEPROM\n"); |
| 345 | if (exthdr->devicetype & 0x2000) |
| 346 | dprintk(DBGLVL_API, |
| 347 | " = VBI Decoder\n"); |
| 348 | if (exthdr->devicetype & 0x10000) |
| 349 | dprintk(DBGLVL_API, |
| 350 | " = Streaming Device\n"); |
| 351 | if (exthdr->devicetype & 0x20000) |
| 352 | dprintk(DBGLVL_API, |
| 353 | " = DRM Device\n"); |
| 354 | if (exthdr->devicetype & 0x40000000) |
| 355 | dprintk(DBGLVL_API, |
| 356 | " = Generic Device\n"); |
| 357 | if (exthdr->devicetype & 0x80000000) |
| 358 | dprintk(DBGLVL_API, |
| 359 | " = Config Space Device\n"); |
| 360 | dprintk(DBGLVL_API, " numgpiopins = 0x%x\n", |
| 361 | exthdr->numgpiopins); |
| 362 | dprintk(DBGLVL_API, " numgpiogroups = 0x%x\n", |
| 363 | exthdr->numgpiogroups); |
| 364 | dprintk(DBGLVL_API, " controlsize = 0x%x\n", |
| 365 | exthdr->controlsize); |
| 366 | break; |
| 367 | case PVC_INFRARED_UNIT: |
| 368 | dprintk(DBGLVL_API, " PVC_INFRARED_UNIT\n"); |
| 369 | break; |
| 370 | case DRM_UNIT: |
| 371 | dprintk(DBGLVL_API, " DRM_UNIT\n"); |
| 372 | break; |
| 373 | default: |
| 374 | dprintk(DBGLVL_API, "default %d\n", hdr->subtype); |
| 375 | } |
| 376 | |
| 377 | dprintk(DBGLVL_API, " 1.%x\n", hdr->len); |
| 378 | dprintk(DBGLVL_API, " 2.%x\n", hdr->type); |
| 379 | dprintk(DBGLVL_API, " 3.%x\n", hdr->subtype); |
| 380 | dprintk(DBGLVL_API, " 4.%x\n", hdr->unitid); |
| 381 | |
| 382 | idx += hdr->len; |
| 383 | } |
| 384 | |
| 385 | return 0; |
| 386 | } |
| 387 | |
| 388 | int saa7164_api_enum_subdevs(struct saa7164_dev *dev) |
| 389 | { |
| 390 | int ret; |
| 391 | u32 buflen = 0; |
| 392 | u8 *buf; |
| 393 | |
| 394 | dprintk(DBGLVL_API, "%s()\n", __func__); |
| 395 | |
| 396 | /* Get the total descriptor length */ |
| 397 | ret = saa7164_cmd_send(dev, 0, GET_LEN, |
| 398 | GET_DESCRIPTORS_CONTROL, sizeof(buflen), &buflen); |
| 399 | if (ret != SAA_OK) |
| 400 | printk(KERN_ERR "%s() error, ret = 0x%x\n", __func__, ret); |
| 401 | |
| 402 | dprintk(DBGLVL_API, "%s() total descriptor size = %d bytes.\n", |
| 403 | __func__, buflen); |
| 404 | |
| 405 | /* Allocate enough storage for all of the descs */ |
| 406 | buf = kzalloc(buflen, GFP_KERNEL); |
| 407 | if (buf == NULL) |
| 408 | return SAA_ERR_NO_RESOURCES; |
| 409 | |
| 410 | /* Retrieve them */ |
| 411 | ret = saa7164_cmd_send(dev, 0, GET_CUR, |
| 412 | GET_DESCRIPTORS_CONTROL, buflen, buf); |
| 413 | if (ret != SAA_OK) { |
| 414 | printk(KERN_ERR "%s() error, ret = 0x%x\n", __func__, ret); |
| 415 | goto out; |
| 416 | } |
| 417 | |
Ingo Molnar | b1912a85 | 2009-09-21 15:23:45 -0300 | [diff] [blame] | 418 | if (saa_debug & DBGLVL_API) |
Steven Toth | 443c1228 | 2009-05-09 21:17:28 -0300 | [diff] [blame] | 419 | saa7164_dumphex16(dev, buf, (buflen/16)*16); |
| 420 | |
| 421 | saa7164_api_dump_subdevs(dev, buf, buflen); |
| 422 | |
| 423 | out: |
| 424 | kfree(buf); |
| 425 | return ret; |
| 426 | } |
| 427 | |
| 428 | int saa7164_api_i2c_read(struct saa7164_i2c *bus, u8 addr, u32 reglen, u8 *reg, |
| 429 | u32 datalen, u8 *data) |
| 430 | { |
| 431 | struct saa7164_dev *dev = bus->dev; |
| 432 | u16 len = 0; |
| 433 | int unitid; |
| 434 | u32 regval; |
| 435 | u8 buf[256]; |
| 436 | int ret; |
| 437 | |
| 438 | dprintk(DBGLVL_API, "%s()\n", __func__); |
| 439 | |
| 440 | if (reglen > 4) |
| 441 | return -EIO; |
| 442 | |
| 443 | if (reglen == 1) |
| 444 | regval = *(reg); |
| 445 | else |
| 446 | if (reglen == 2) |
| 447 | regval = ((*(reg) << 8) || *(reg+1)); |
| 448 | else |
| 449 | if (reglen == 3) |
| 450 | regval = ((*(reg) << 16) | (*(reg+1) << 8) | *(reg+2)); |
| 451 | else |
| 452 | if (reglen == 4) |
| 453 | regval = ((*(reg) << 24) | (*(reg+1) << 16) | |
| 454 | (*(reg+2) << 8) | *(reg+3)); |
| 455 | |
| 456 | /* Prepare the send buffer */ |
| 457 | /* Bytes 00-03 source register length |
| 458 | * 04-07 source bytes to read |
| 459 | * 08... register address |
| 460 | */ |
| 461 | memset(buf, 0, sizeof(buf)); |
| 462 | memcpy((buf + 2 * sizeof(u32) + 0), reg, reglen); |
| 463 | *((u32 *)(buf + 0 * sizeof(u32))) = reglen; |
| 464 | *((u32 *)(buf + 1 * sizeof(u32))) = datalen; |
| 465 | |
| 466 | unitid = saa7164_i2caddr_to_unitid(bus, addr); |
| 467 | if (unitid < 0) { |
| 468 | printk(KERN_ERR |
| 469 | "%s() error, cannot translate regaddr 0x%x to unitid\n", |
| 470 | __func__, addr); |
| 471 | return -EIO; |
| 472 | } |
| 473 | |
| 474 | ret = saa7164_cmd_send(bus->dev, unitid, GET_LEN, |
| 475 | EXU_REGISTER_ACCESS_CONTROL, sizeof(len), &len); |
| 476 | if (ret != SAA_OK) { |
| 477 | printk(KERN_ERR "%s() error, ret(1) = 0x%x\n", __func__, ret); |
| 478 | return -EIO; |
| 479 | } |
| 480 | |
| 481 | dprintk(DBGLVL_API, "%s() len = %d bytes\n", __func__, len); |
| 482 | |
Ingo Molnar | b1912a85 | 2009-09-21 15:23:45 -0300 | [diff] [blame] | 483 | if (saa_debug & DBGLVL_I2C) |
Steven Toth | 443c1228 | 2009-05-09 21:17:28 -0300 | [diff] [blame] | 484 | saa7164_dumphex16(dev, buf, 2 * 16); |
| 485 | |
| 486 | ret = saa7164_cmd_send(bus->dev, unitid, GET_CUR, |
| 487 | EXU_REGISTER_ACCESS_CONTROL, len, &buf); |
| 488 | if (ret != SAA_OK) |
| 489 | printk(KERN_ERR "%s() error, ret(2) = 0x%x\n", __func__, ret); |
| 490 | else { |
Ingo Molnar | b1912a85 | 2009-09-21 15:23:45 -0300 | [diff] [blame] | 491 | if (saa_debug & DBGLVL_I2C) |
Steven Toth | 443c1228 | 2009-05-09 21:17:28 -0300 | [diff] [blame] | 492 | saa7164_dumphex16(dev, buf, sizeof(buf)); |
| 493 | memcpy(data, (buf + 2 * sizeof(u32) + reglen), datalen); |
| 494 | } |
| 495 | |
| 496 | return ret == SAA_OK ? 0 : -EIO; |
| 497 | } |
| 498 | |
| 499 | /* For a given 8 bit i2c address device, write the buffer */ |
| 500 | int saa7164_api_i2c_write(struct saa7164_i2c *bus, u8 addr, u32 datalen, |
| 501 | u8 *data) |
| 502 | { |
| 503 | struct saa7164_dev *dev = bus->dev; |
| 504 | u16 len = 0; |
| 505 | int unitid; |
| 506 | int reglen; |
| 507 | u8 buf[256]; |
| 508 | int ret; |
| 509 | |
| 510 | dprintk(DBGLVL_API, "%s()\n", __func__); |
| 511 | |
| 512 | if ((datalen == 0) || (datalen > 232)) |
| 513 | return -EIO; |
| 514 | |
| 515 | memset(buf, 0, sizeof(buf)); |
| 516 | |
| 517 | unitid = saa7164_i2caddr_to_unitid(bus, addr); |
| 518 | if (unitid < 0) { |
| 519 | printk(KERN_ERR |
| 520 | "%s() error, cannot translate regaddr 0x%x to unitid\n", |
| 521 | __func__, addr); |
| 522 | return -EIO; |
| 523 | } |
| 524 | |
| 525 | reglen = saa7164_i2caddr_to_reglen(bus, addr); |
| 526 | if (unitid < 0) { |
| 527 | printk(KERN_ERR |
| 528 | "%s() error, cannot translate regaddr to reglen\n", |
| 529 | __func__); |
| 530 | return -EIO; |
| 531 | } |
| 532 | |
| 533 | ret = saa7164_cmd_send(bus->dev, unitid, GET_LEN, |
| 534 | EXU_REGISTER_ACCESS_CONTROL, sizeof(len), &len); |
| 535 | if (ret != SAA_OK) { |
| 536 | printk(KERN_ERR "%s() error, ret(1) = 0x%x\n", __func__, ret); |
| 537 | return -EIO; |
| 538 | } |
| 539 | |
| 540 | dprintk(DBGLVL_API, "%s() len = %d bytes\n", __func__, len); |
| 541 | |
| 542 | /* Prepare the send buffer */ |
| 543 | /* Bytes 00-03 dest register length |
| 544 | * 04-07 dest bytes to write |
| 545 | * 08... register address |
| 546 | */ |
| 547 | *((u32 *)(buf + 0 * sizeof(u32))) = reglen; |
| 548 | *((u32 *)(buf + 1 * sizeof(u32))) = datalen - reglen; |
| 549 | memcpy((buf + 2 * sizeof(u32)), data, datalen); |
| 550 | |
Ingo Molnar | b1912a85 | 2009-09-21 15:23:45 -0300 | [diff] [blame] | 551 | if (saa_debug & DBGLVL_I2C) |
Steven Toth | 443c1228 | 2009-05-09 21:17:28 -0300 | [diff] [blame] | 552 | saa7164_dumphex16(dev, buf, sizeof(buf)); |
| 553 | |
| 554 | ret = saa7164_cmd_send(bus->dev, unitid, SET_CUR, |
| 555 | EXU_REGISTER_ACCESS_CONTROL, len, &buf); |
| 556 | if (ret != SAA_OK) |
| 557 | printk(KERN_ERR "%s() error, ret(2) = 0x%x\n", __func__, ret); |
| 558 | |
| 559 | return ret == SAA_OK ? 0 : -EIO; |
| 560 | } |
| 561 | |
| 562 | |
| 563 | int saa7164_api_modify_gpio(struct saa7164_dev *dev, u8 unitid, |
| 564 | u8 pin, u8 state) |
| 565 | { |
| 566 | int ret; |
| 567 | tmComResGPIO_t t; |
| 568 | |
| 569 | dprintk(DBGLVL_API, "%s(0x%x, %d, %d)\n", |
| 570 | __func__, unitid, pin, state); |
| 571 | |
| 572 | if ((pin > 7) || (state > 2)) |
| 573 | return SAA_ERR_BAD_PARAMETER; |
| 574 | |
| 575 | t.pin = pin; |
| 576 | t.state = state; |
| 577 | |
| 578 | ret = saa7164_cmd_send(dev, unitid, SET_CUR, |
| 579 | EXU_GPIO_CONTROL, sizeof(t), &t); |
| 580 | if (ret != SAA_OK) |
| 581 | printk(KERN_ERR "%s() error, ret = 0x%x\n", |
| 582 | __func__, ret); |
| 583 | |
| 584 | return ret; |
| 585 | } |
| 586 | |
| 587 | int saa7164_api_set_gpiobit(struct saa7164_dev *dev, u8 unitid, |
| 588 | u8 pin) |
| 589 | { |
| 590 | return saa7164_api_modify_gpio(dev, unitid, pin, 1); |
| 591 | } |
| 592 | |
| 593 | int saa7164_api_clear_gpiobit(struct saa7164_dev *dev, u8 unitid, |
| 594 | u8 pin) |
| 595 | { |
| 596 | return saa7164_api_modify_gpio(dev, unitid, pin, 0); |
| 597 | } |
| 598 | |
| 599 | |
| 600 | |