blob: d6e925c381a3455a760ce22bedaef16f8efb8f7e [file] [log] [blame]
Maxime Ripard0bef9002013-06-22 20:22:14 +02001/*
2 * Copyright 2013 Maxime Ripard
3 *
4 * Maxime Ripard <maxime.ripard@free-electrons.com>
5 *
Maxime Riparda38e4222014-10-17 11:38:38 +02006 * This file is dual-licensed: you can use it either under the terms
7 * of the GPL or the X11 license, at your option. Note that this dual
8 * licensing only applies to this file, and not this project as a
9 * whole.
Maxime Ripard0bef9002013-06-22 20:22:14 +020010 *
Maxime Riparda38e4222014-10-17 11:38:38 +020011 * a) This file is free software; you can redistribute it and/or
12 * modify it under the terms of the GNU General Public License as
13 * published by the Free Software Foundation; either version 2 of the
14 * License, or (at your option) any later version.
15 *
16 * This file is distributed in the hope that it will be useful,
17 * but WITHOUT ANY WARRANTY; without even the implied warranty of
18 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
19 * GNU General Public License for more details.
20 *
21 * You should have received a copy of the GNU General Public
22 * License along with this file; if not, write to the Free
23 * Software Foundation, Inc., 51 Franklin St, Fifth Floor, Boston,
24 * MA 02110-1301 USA
25 *
26 * Or, alternatively,
27 *
28 * b) Permission is hereby granted, free of charge, to any person
29 * obtaining a copy of this software and associated documentation
30 * files (the "Software"), to deal in the Software without
31 * restriction, including without limitation the rights to use,
32 * copy, modify, merge, publish, distribute, sublicense, and/or
33 * sell copies of the Software, and to permit persons to whom the
34 * Software is furnished to do so, subject to the following
35 * conditions:
36 *
37 * The above copyright notice and this permission notice shall be
38 * included in all copies or substantial portions of the Software.
39 *
40 * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
41 * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
42 * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
43 * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
44 * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
45 * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
46 * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
47 * OTHER DEALINGS IN THE SOFTWARE.
Maxime Ripard0bef9002013-06-22 20:22:14 +020048 */
49
50/dts-v1/;
Maxime Ripard71455702014-12-16 22:59:54 +010051#include "sun6i-a31.dtsi"
52#include "sunxi-common-regulators.dtsi"
Maxime Ripard0bef9002013-06-22 20:22:14 +020053
Maxime Ripardbca12922014-12-16 22:59:55 +010054#include <dt-bindings/gpio/gpio.h>
Maxime Ripard092a0c32014-12-16 22:59:57 +010055#include <dt-bindings/pinctrl/sun4i-a10.h>
Maxime Ripardbca12922014-12-16 22:59:55 +010056
Maxime Ripard0bef9002013-06-22 20:22:14 +020057/ {
58 model = "WITS A31 Colombus Evaluation Board";
59 compatible = "wits,colombus", "allwinner,sun6i-a31";
60
61 chosen {
62 bootargs = "earlyprintk console=ttyS0,115200";
63 };
Maxime Ripard6f1b57f2015-01-31 12:11:54 +010064};
Maxime Ripard0bef9002013-06-22 20:22:14 +020065
Maxime Ripard6f1b57f2015-01-31 12:11:54 +010066&ehci1 {
67 status = "okay";
68};
Maxime Ripardece99c42014-05-21 10:23:20 +020069
Maxime Ripard6f1b57f2015-01-31 12:11:54 +010070&i2c0 {
71 pinctrl-names = "default";
72 pinctrl-0 = <&i2c0_pins_a>;
73 status = "fail";
74};
Maxime Riparda9bfb5f2014-05-20 13:59:15 +020075
Maxime Ripard6f1b57f2015-01-31 12:11:54 +010076&i2c1 {
77 pinctrl-names = "default";
78 pinctrl-0 = <&i2c1_pins_a>;
79 status = "okay";
80};
Maxime Riparda9bfb5f2014-05-20 13:59:15 +020081
Maxime Ripard6f1b57f2015-01-31 12:11:54 +010082&i2c2 {
83 pinctrl-names = "default";
84 pinctrl-0 = <&i2c2_pins_a>;
85 status = "okay";
86};
Maxime Ripardece99c42014-05-21 10:23:20 +020087
Maxime Ripard6f1b57f2015-01-31 12:11:54 +010088&mmc0 {
89 pinctrl-names = "default";
90 pinctrl-0 = <&mmc0_pins_a>, <&mmc0_cd_pin_colombus>;
91 vmmc-supply = <&reg_vcc3v0>;
92 bus-width = <4>;
93 cd-gpios = <&pio 0 8 GPIO_ACTIVE_HIGH>; /* PA8 */
94 cd-inverted;
95 status = "okay";
96};
Maxime Ripardece99c42014-05-21 10:23:20 +020097
Maxime Ripard6f1b57f2015-01-31 12:11:54 +010098&mmc0_pins_a {
99 allwinner,pull = <SUN4I_PINCTRL_PULL_UP>;
100};
Maxime Riparda9bfb5f2014-05-20 13:59:15 +0200101
Maxime Ripard6f1b57f2015-01-31 12:11:54 +0100102&pio {
103 mmc0_cd_pin_colombus: mmc0_cd_pin@0 {
104 allwinner,pins = "PA8";
105 allwinner,function = "gpio_in";
106 allwinner,drive = <SUN4I_PINCTRL_10_MA>;
107 allwinner,pull = <SUN4I_PINCTRL_PULL_UP>;
Maxime Ripard0bef9002013-06-22 20:22:14 +0200108 };
Maxime Riparda9bfb5f2014-05-20 13:59:15 +0200109
Maxime Ripard6f1b57f2015-01-31 12:11:54 +0100110 usb2_vbus_pin_colombus: usb2_vbus_pin@0 {
111 allwinner,pins = "PH24";
112 allwinner,function = "gpio_out";
113 allwinner,drive = <SUN4I_PINCTRL_10_MA>;
114 allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
Maxime Riparda9bfb5f2014-05-20 13:59:15 +0200115 };
Maxime Ripard0bef9002013-06-22 20:22:14 +0200116};
Maxime Ripard6f1b57f2015-01-31 12:11:54 +0100117
118&reg_usb2_vbus {
119 pinctrl-names = "default";
120 pinctrl-0 = <&usb2_vbus_pin_colombus>;
121 gpio = <&pio 7 24 GPIO_ACTIVE_HIGH>;
122 status = "okay";
123};
124
125&uart0 {
126 pinctrl-names = "default";
127 pinctrl-0 = <&uart0_pins_a>;
128 status = "okay";
129};
130
131&usbphy {
132 usb2_vbus-supply = <&reg_usb2_vbus>;
133 status = "okay";
134};