Mark Brown | 74dc55e | 2009-06-09 09:55:51 +0100 | [diff] [blame^] | 1 | /* |
| 2 | * wm8961.c -- WM8961 ALSA SoC Audio driver |
| 3 | * |
| 4 | * Author: Mark Brown |
| 5 | * |
| 6 | * This program is free software; you can redistribute it and/or modify |
| 7 | * it under the terms of the GNU General Public License version 2 as |
| 8 | * published by the Free Software Foundation. |
| 9 | * |
| 10 | * Currently unimplemented features: |
| 11 | * - ALC |
| 12 | */ |
| 13 | |
| 14 | #include <linux/module.h> |
| 15 | #include <linux/moduleparam.h> |
| 16 | #include <linux/init.h> |
| 17 | #include <linux/delay.h> |
| 18 | #include <linux/pm.h> |
| 19 | #include <linux/i2c.h> |
| 20 | #include <linux/platform_device.h> |
| 21 | #include <sound/core.h> |
| 22 | #include <sound/pcm.h> |
| 23 | #include <sound/pcm_params.h> |
| 24 | #include <sound/soc.h> |
| 25 | #include <sound/soc-dapm.h> |
| 26 | #include <sound/initval.h> |
| 27 | #include <sound/tlv.h> |
| 28 | |
| 29 | #include "wm8961.h" |
| 30 | |
| 31 | #define WM8961_MAX_REGISTER 0xFC |
| 32 | |
| 33 | static u16 wm8961_reg_defaults[] = { |
| 34 | 0x009F, /* R0 - Left Input volume */ |
| 35 | 0x009F, /* R1 - Right Input volume */ |
| 36 | 0x0000, /* R2 - LOUT1 volume */ |
| 37 | 0x0000, /* R3 - ROUT1 volume */ |
| 38 | 0x0020, /* R4 - Clocking1 */ |
| 39 | 0x0008, /* R5 - ADC & DAC Control 1 */ |
| 40 | 0x0000, /* R6 - ADC & DAC Control 2 */ |
| 41 | 0x000A, /* R7 - Audio Interface 0 */ |
| 42 | 0x01F4, /* R8 - Clocking2 */ |
| 43 | 0x0000, /* R9 - Audio Interface 1 */ |
| 44 | 0x00FF, /* R10 - Left DAC volume */ |
| 45 | 0x00FF, /* R11 - Right DAC volume */ |
| 46 | 0x0000, /* R12 */ |
| 47 | 0x0000, /* R13 */ |
| 48 | 0x0040, /* R14 - Audio Interface 2 */ |
| 49 | 0x0000, /* R15 - Software Reset */ |
| 50 | 0x0000, /* R16 */ |
| 51 | 0x007B, /* R17 - ALC1 */ |
| 52 | 0x0000, /* R18 - ALC2 */ |
| 53 | 0x0032, /* R19 - ALC3 */ |
| 54 | 0x0000, /* R20 - Noise Gate */ |
| 55 | 0x00C0, /* R21 - Left ADC volume */ |
| 56 | 0x00C0, /* R22 - Right ADC volume */ |
| 57 | 0x0120, /* R23 - Additional control(1) */ |
| 58 | 0x0000, /* R24 - Additional control(2) */ |
| 59 | 0x0000, /* R25 - Pwr Mgmt (1) */ |
| 60 | 0x0000, /* R26 - Pwr Mgmt (2) */ |
| 61 | 0x0000, /* R27 - Additional Control (3) */ |
| 62 | 0x0000, /* R28 - Anti-pop */ |
| 63 | 0x0000, /* R29 */ |
| 64 | 0x005F, /* R30 - Clocking 3 */ |
| 65 | 0x0000, /* R31 */ |
| 66 | 0x0000, /* R32 - ADCL signal path */ |
| 67 | 0x0000, /* R33 - ADCR signal path */ |
| 68 | 0x0000, /* R34 */ |
| 69 | 0x0000, /* R35 */ |
| 70 | 0x0000, /* R36 */ |
| 71 | 0x0000, /* R37 */ |
| 72 | 0x0000, /* R38 */ |
| 73 | 0x0000, /* R39 */ |
| 74 | 0x0000, /* R40 - LOUT2 volume */ |
| 75 | 0x0000, /* R41 - ROUT2 volume */ |
| 76 | 0x0000, /* R42 */ |
| 77 | 0x0000, /* R43 */ |
| 78 | 0x0000, /* R44 */ |
| 79 | 0x0000, /* R45 */ |
| 80 | 0x0000, /* R46 */ |
| 81 | 0x0000, /* R47 - Pwr Mgmt (3) */ |
| 82 | 0x0023, /* R48 - Additional Control (4) */ |
| 83 | 0x0000, /* R49 - Class D Control 1 */ |
| 84 | 0x0000, /* R50 */ |
| 85 | 0x0003, /* R51 - Class D Control 2 */ |
| 86 | 0x0000, /* R52 */ |
| 87 | 0x0000, /* R53 */ |
| 88 | 0x0000, /* R54 */ |
| 89 | 0x0000, /* R55 */ |
| 90 | 0x0106, /* R56 - Clocking 4 */ |
| 91 | 0x0000, /* R57 - DSP Sidetone 0 */ |
| 92 | 0x0000, /* R58 - DSP Sidetone 1 */ |
| 93 | 0x0000, /* R59 */ |
| 94 | 0x0000, /* R60 - DC Servo 0 */ |
| 95 | 0x0000, /* R61 - DC Servo 1 */ |
| 96 | 0x0000, /* R62 */ |
| 97 | 0x015E, /* R63 - DC Servo 3 */ |
| 98 | 0x0010, /* R64 */ |
| 99 | 0x0010, /* R65 - DC Servo 5 */ |
| 100 | 0x0000, /* R66 */ |
| 101 | 0x0001, /* R67 */ |
| 102 | 0x0003, /* R68 - Analogue PGA Bias */ |
| 103 | 0x0000, /* R69 - Analogue HP 0 */ |
| 104 | 0x0060, /* R70 */ |
| 105 | 0x01FB, /* R71 - Analogue HP 2 */ |
| 106 | 0x0000, /* R72 - Charge Pump 1 */ |
| 107 | 0x0065, /* R73 */ |
| 108 | 0x005F, /* R74 */ |
| 109 | 0x0059, /* R75 */ |
| 110 | 0x006B, /* R76 */ |
| 111 | 0x0038, /* R77 */ |
| 112 | 0x000C, /* R78 */ |
| 113 | 0x000A, /* R79 */ |
| 114 | 0x006B, /* R80 */ |
| 115 | 0x0000, /* R81 */ |
| 116 | 0x0000, /* R82 - Charge Pump B */ |
| 117 | 0x0087, /* R83 */ |
| 118 | 0x0000, /* R84 */ |
| 119 | 0x005C, /* R85 */ |
| 120 | 0x0000, /* R86 */ |
| 121 | 0x0000, /* R87 - Write Sequencer 1 */ |
| 122 | 0x0000, /* R88 - Write Sequencer 2 */ |
| 123 | 0x0000, /* R89 - Write Sequencer 3 */ |
| 124 | 0x0000, /* R90 - Write Sequencer 4 */ |
| 125 | 0x0000, /* R91 - Write Sequencer 5 */ |
| 126 | 0x0000, /* R92 - Write Sequencer 6 */ |
| 127 | 0x0000, /* R93 - Write Sequencer 7 */ |
| 128 | 0x0000, /* R94 */ |
| 129 | 0x0000, /* R95 */ |
| 130 | 0x0000, /* R96 */ |
| 131 | 0x0000, /* R97 */ |
| 132 | 0x0000, /* R98 */ |
| 133 | 0x0000, /* R99 */ |
| 134 | 0x0000, /* R100 */ |
| 135 | 0x0000, /* R101 */ |
| 136 | 0x0000, /* R102 */ |
| 137 | 0x0000, /* R103 */ |
| 138 | 0x0000, /* R104 */ |
| 139 | 0x0000, /* R105 */ |
| 140 | 0x0000, /* R106 */ |
| 141 | 0x0000, /* R107 */ |
| 142 | 0x0000, /* R108 */ |
| 143 | 0x0000, /* R109 */ |
| 144 | 0x0000, /* R110 */ |
| 145 | 0x0000, /* R111 */ |
| 146 | 0x0000, /* R112 */ |
| 147 | 0x0000, /* R113 */ |
| 148 | 0x0000, /* R114 */ |
| 149 | 0x0000, /* R115 */ |
| 150 | 0x0000, /* R116 */ |
| 151 | 0x0000, /* R117 */ |
| 152 | 0x0000, /* R118 */ |
| 153 | 0x0000, /* R119 */ |
| 154 | 0x0000, /* R120 */ |
| 155 | 0x0000, /* R121 */ |
| 156 | 0x0000, /* R122 */ |
| 157 | 0x0000, /* R123 */ |
| 158 | 0x0000, /* R124 */ |
| 159 | 0x0000, /* R125 */ |
| 160 | 0x0000, /* R126 */ |
| 161 | 0x0000, /* R127 */ |
| 162 | 0x0000, /* R128 */ |
| 163 | 0x0000, /* R129 */ |
| 164 | 0x0000, /* R130 */ |
| 165 | 0x0000, /* R131 */ |
| 166 | 0x0000, /* R132 */ |
| 167 | 0x0000, /* R133 */ |
| 168 | 0x0000, /* R134 */ |
| 169 | 0x0000, /* R135 */ |
| 170 | 0x0000, /* R136 */ |
| 171 | 0x0000, /* R137 */ |
| 172 | 0x0000, /* R138 */ |
| 173 | 0x0000, /* R139 */ |
| 174 | 0x0000, /* R140 */ |
| 175 | 0x0000, /* R141 */ |
| 176 | 0x0000, /* R142 */ |
| 177 | 0x0000, /* R143 */ |
| 178 | 0x0000, /* R144 */ |
| 179 | 0x0000, /* R145 */ |
| 180 | 0x0000, /* R146 */ |
| 181 | 0x0000, /* R147 */ |
| 182 | 0x0000, /* R148 */ |
| 183 | 0x0000, /* R149 */ |
| 184 | 0x0000, /* R150 */ |
| 185 | 0x0000, /* R151 */ |
| 186 | 0x0000, /* R152 */ |
| 187 | 0x0000, /* R153 */ |
| 188 | 0x0000, /* R154 */ |
| 189 | 0x0000, /* R155 */ |
| 190 | 0x0000, /* R156 */ |
| 191 | 0x0000, /* R157 */ |
| 192 | 0x0000, /* R158 */ |
| 193 | 0x0000, /* R159 */ |
| 194 | 0x0000, /* R160 */ |
| 195 | 0x0000, /* R161 */ |
| 196 | 0x0000, /* R162 */ |
| 197 | 0x0000, /* R163 */ |
| 198 | 0x0000, /* R164 */ |
| 199 | 0x0000, /* R165 */ |
| 200 | 0x0000, /* R166 */ |
| 201 | 0x0000, /* R167 */ |
| 202 | 0x0000, /* R168 */ |
| 203 | 0x0000, /* R169 */ |
| 204 | 0x0000, /* R170 */ |
| 205 | 0x0000, /* R171 */ |
| 206 | 0x0000, /* R172 */ |
| 207 | 0x0000, /* R173 */ |
| 208 | 0x0000, /* R174 */ |
| 209 | 0x0000, /* R175 */ |
| 210 | 0x0000, /* R176 */ |
| 211 | 0x0000, /* R177 */ |
| 212 | 0x0000, /* R178 */ |
| 213 | 0x0000, /* R179 */ |
| 214 | 0x0000, /* R180 */ |
| 215 | 0x0000, /* R181 */ |
| 216 | 0x0000, /* R182 */ |
| 217 | 0x0000, /* R183 */ |
| 218 | 0x0000, /* R184 */ |
| 219 | 0x0000, /* R185 */ |
| 220 | 0x0000, /* R186 */ |
| 221 | 0x0000, /* R187 */ |
| 222 | 0x0000, /* R188 */ |
| 223 | 0x0000, /* R189 */ |
| 224 | 0x0000, /* R190 */ |
| 225 | 0x0000, /* R191 */ |
| 226 | 0x0000, /* R192 */ |
| 227 | 0x0000, /* R193 */ |
| 228 | 0x0000, /* R194 */ |
| 229 | 0x0000, /* R195 */ |
| 230 | 0x0030, /* R196 */ |
| 231 | 0x0006, /* R197 */ |
| 232 | 0x0000, /* R198 */ |
| 233 | 0x0060, /* R199 */ |
| 234 | 0x0000, /* R200 */ |
| 235 | 0x003F, /* R201 */ |
| 236 | 0x0000, /* R202 */ |
| 237 | 0x0000, /* R203 */ |
| 238 | 0x0000, /* R204 */ |
| 239 | 0x0001, /* R205 */ |
| 240 | 0x0000, /* R206 */ |
| 241 | 0x0181, /* R207 */ |
| 242 | 0x0005, /* R208 */ |
| 243 | 0x0008, /* R209 */ |
| 244 | 0x0008, /* R210 */ |
| 245 | 0x0000, /* R211 */ |
| 246 | 0x013B, /* R212 */ |
| 247 | 0x0000, /* R213 */ |
| 248 | 0x0000, /* R214 */ |
| 249 | 0x0000, /* R215 */ |
| 250 | 0x0000, /* R216 */ |
| 251 | 0x0070, /* R217 */ |
| 252 | 0x0000, /* R218 */ |
| 253 | 0x0000, /* R219 */ |
| 254 | 0x0000, /* R220 */ |
| 255 | 0x0000, /* R221 */ |
| 256 | 0x0000, /* R222 */ |
| 257 | 0x0003, /* R223 */ |
| 258 | 0x0000, /* R224 */ |
| 259 | 0x0000, /* R225 */ |
| 260 | 0x0001, /* R226 */ |
| 261 | 0x0008, /* R227 */ |
| 262 | 0x0000, /* R228 */ |
| 263 | 0x0000, /* R229 */ |
| 264 | 0x0000, /* R230 */ |
| 265 | 0x0000, /* R231 */ |
| 266 | 0x0004, /* R232 */ |
| 267 | 0x0000, /* R233 */ |
| 268 | 0x0000, /* R234 */ |
| 269 | 0x0000, /* R235 */ |
| 270 | 0x0000, /* R236 */ |
| 271 | 0x0000, /* R237 */ |
| 272 | 0x0080, /* R238 */ |
| 273 | 0x0000, /* R239 */ |
| 274 | 0x0000, /* R240 */ |
| 275 | 0x0000, /* R241 */ |
| 276 | 0x0000, /* R242 */ |
| 277 | 0x0000, /* R243 */ |
| 278 | 0x0000, /* R244 */ |
| 279 | 0x0052, /* R245 */ |
| 280 | 0x0110, /* R246 */ |
| 281 | 0x0040, /* R247 */ |
| 282 | 0x0000, /* R248 */ |
| 283 | 0x0030, /* R249 */ |
| 284 | 0x0000, /* R250 */ |
| 285 | 0x0000, /* R251 */ |
| 286 | 0x0001, /* R252 - General test 1 */ |
| 287 | }; |
| 288 | |
| 289 | struct wm8961_priv { |
| 290 | struct snd_soc_codec codec; |
| 291 | int sysclk; |
| 292 | u16 reg_cache[WM8961_MAX_REGISTER]; |
| 293 | }; |
| 294 | |
| 295 | static int wm8961_reg_is_volatile(int reg) |
| 296 | { |
| 297 | switch (reg) { |
| 298 | case WM8961_WRITE_SEQUENCER_7: |
| 299 | case WM8961_DC_SERVO_1: |
| 300 | return 1; |
| 301 | |
| 302 | default: |
| 303 | return 0; |
| 304 | } |
| 305 | } |
| 306 | |
| 307 | static unsigned int wm8961_read_reg_cache(struct snd_soc_codec *codec, |
| 308 | unsigned int reg) |
| 309 | { |
| 310 | u16 *cache = codec->reg_cache; |
| 311 | BUG_ON(reg > WM8961_MAX_REGISTER); |
| 312 | return cache[reg]; |
| 313 | } |
| 314 | |
| 315 | static unsigned int wm8961_read_hw(struct snd_soc_codec *codec, u8 reg) |
| 316 | { |
| 317 | struct i2c_msg xfer[2]; |
| 318 | u16 data; |
| 319 | int ret; |
| 320 | struct i2c_client *client = codec->control_data; |
| 321 | |
| 322 | BUG_ON(reg > WM8961_MAX_REGISTER); |
| 323 | |
| 324 | /* Write register */ |
| 325 | xfer[0].addr = client->addr; |
| 326 | xfer[0].flags = 0; |
| 327 | xfer[0].len = 1; |
| 328 | xfer[0].buf = ® |
| 329 | |
| 330 | /* Read data */ |
| 331 | xfer[1].addr = client->addr; |
| 332 | xfer[1].flags = I2C_M_RD; |
| 333 | xfer[1].len = 2; |
| 334 | xfer[1].buf = (u8 *)&data; |
| 335 | |
| 336 | ret = i2c_transfer(client->adapter, xfer, 2); |
| 337 | if (ret != 2) { |
| 338 | dev_err(&client->dev, "i2c_transfer() returned %d\n", ret); |
| 339 | return 0; |
| 340 | } |
| 341 | |
| 342 | return (data >> 8) | ((data & 0xff) << 8); |
| 343 | } |
| 344 | |
| 345 | static unsigned int wm8961_read(struct snd_soc_codec *codec, unsigned int reg) |
| 346 | { |
| 347 | if (wm8961_reg_is_volatile(reg)) |
| 348 | return wm8961_read_hw(codec, reg); |
| 349 | else |
| 350 | return wm8961_read_reg_cache(codec, reg); |
| 351 | } |
| 352 | |
| 353 | static int wm8961_write(struct snd_soc_codec *codec, unsigned int reg, |
| 354 | unsigned int value) |
| 355 | { |
| 356 | u16 *cache = codec->reg_cache; |
| 357 | u8 data[3]; |
| 358 | |
| 359 | BUG_ON(reg > WM8961_MAX_REGISTER); |
| 360 | |
| 361 | if (!wm8961_reg_is_volatile(reg)) |
| 362 | cache[reg] = value; |
| 363 | |
| 364 | data[0] = reg; |
| 365 | data[1] = value >> 8; |
| 366 | data[2] = value & 0x00ff; |
| 367 | |
| 368 | if (codec->hw_write(codec->control_data, data, 3) == 3) |
| 369 | return 0; |
| 370 | else |
| 371 | return -EIO; |
| 372 | } |
| 373 | |
| 374 | static int wm8961_reset(struct snd_soc_codec *codec) |
| 375 | { |
| 376 | return wm8961_write(codec, WM8961_SOFTWARE_RESET, 0); |
| 377 | } |
| 378 | |
| 379 | /* |
| 380 | * The headphone output supports special anti-pop sequences giving |
| 381 | * silent power up and power down. |
| 382 | */ |
| 383 | static int wm8961_hp_event(struct snd_soc_dapm_widget *w, |
| 384 | struct snd_kcontrol *kcontrol, int event) |
| 385 | { |
| 386 | struct snd_soc_codec *codec = w->codec; |
| 387 | u16 hp_reg = wm8961_read(codec, WM8961_ANALOGUE_HP_0); |
| 388 | u16 cp_reg = wm8961_read(codec, WM8961_CHARGE_PUMP_1); |
| 389 | u16 pwr_reg = wm8961_read(codec, WM8961_PWR_MGMT_2); |
| 390 | u16 dcs_reg = wm8961_read(codec, WM8961_DC_SERVO_1); |
| 391 | int timeout = 500; |
| 392 | |
| 393 | if (event & SND_SOC_DAPM_POST_PMU) { |
| 394 | /* Make sure the output is shorted */ |
| 395 | hp_reg &= ~(WM8961_HPR_RMV_SHORT | WM8961_HPL_RMV_SHORT); |
| 396 | wm8961_write(codec, WM8961_ANALOGUE_HP_0, hp_reg); |
| 397 | |
| 398 | /* Enable the charge pump */ |
| 399 | cp_reg |= WM8961_CP_ENA; |
| 400 | wm8961_write(codec, WM8961_CHARGE_PUMP_1, cp_reg); |
| 401 | mdelay(5); |
| 402 | |
| 403 | /* Enable the PGA */ |
| 404 | pwr_reg |= WM8961_LOUT1_PGA | WM8961_ROUT1_PGA; |
| 405 | wm8961_write(codec, WM8961_PWR_MGMT_2, pwr_reg); |
| 406 | |
| 407 | /* Enable the amplifier */ |
| 408 | hp_reg |= WM8961_HPR_ENA | WM8961_HPL_ENA; |
| 409 | wm8961_write(codec, WM8961_ANALOGUE_HP_0, hp_reg); |
| 410 | |
| 411 | /* Second stage enable */ |
| 412 | hp_reg |= WM8961_HPR_ENA_DLY | WM8961_HPL_ENA_DLY; |
| 413 | wm8961_write(codec, WM8961_ANALOGUE_HP_0, hp_reg); |
| 414 | |
| 415 | /* Enable the DC servo & trigger startup */ |
| 416 | dcs_reg |= |
| 417 | WM8961_DCS_ENA_CHAN_HPR | WM8961_DCS_TRIG_STARTUP_HPR | |
| 418 | WM8961_DCS_ENA_CHAN_HPL | WM8961_DCS_TRIG_STARTUP_HPL; |
| 419 | dev_dbg(codec->dev, "Enabling DC servo\n"); |
| 420 | |
| 421 | wm8961_write(codec, WM8961_DC_SERVO_1, dcs_reg); |
| 422 | do { |
| 423 | msleep(1); |
| 424 | dcs_reg = wm8961_read(codec, WM8961_DC_SERVO_1); |
| 425 | } while (--timeout && |
| 426 | dcs_reg & (WM8961_DCS_TRIG_STARTUP_HPR | |
| 427 | WM8961_DCS_TRIG_STARTUP_HPL)); |
| 428 | if (dcs_reg & (WM8961_DCS_TRIG_STARTUP_HPR | |
| 429 | WM8961_DCS_TRIG_STARTUP_HPL)) |
| 430 | dev_err(codec->dev, "DC servo timed out\n"); |
| 431 | else |
| 432 | dev_dbg(codec->dev, "DC servo startup complete\n"); |
| 433 | |
| 434 | /* Enable the output stage */ |
| 435 | hp_reg |= WM8961_HPR_ENA_OUTP | WM8961_HPL_ENA_OUTP; |
| 436 | wm8961_write(codec, WM8961_ANALOGUE_HP_0, hp_reg); |
| 437 | |
| 438 | /* Remove the short on the output stage */ |
| 439 | hp_reg |= WM8961_HPR_RMV_SHORT | WM8961_HPL_RMV_SHORT; |
| 440 | wm8961_write(codec, WM8961_ANALOGUE_HP_0, hp_reg); |
| 441 | } |
| 442 | |
| 443 | if (event & SND_SOC_DAPM_PRE_PMD) { |
| 444 | /* Short the output */ |
| 445 | hp_reg &= ~(WM8961_HPR_RMV_SHORT | WM8961_HPL_RMV_SHORT); |
| 446 | wm8961_write(codec, WM8961_ANALOGUE_HP_0, hp_reg); |
| 447 | |
| 448 | /* Disable the output stage */ |
| 449 | hp_reg &= ~(WM8961_HPR_ENA_OUTP | WM8961_HPL_ENA_OUTP); |
| 450 | wm8961_write(codec, WM8961_ANALOGUE_HP_0, hp_reg); |
| 451 | |
| 452 | /* Disable DC offset cancellation */ |
| 453 | dcs_reg &= ~(WM8961_DCS_ENA_CHAN_HPR | |
| 454 | WM8961_DCS_ENA_CHAN_HPL); |
| 455 | wm8961_write(codec, WM8961_DC_SERVO_1, dcs_reg); |
| 456 | |
| 457 | /* Finish up */ |
| 458 | hp_reg &= ~(WM8961_HPR_ENA_DLY | WM8961_HPR_ENA | |
| 459 | WM8961_HPL_ENA_DLY | WM8961_HPL_ENA); |
| 460 | wm8961_write(codec, WM8961_ANALOGUE_HP_0, hp_reg); |
| 461 | |
| 462 | /* Disable the PGA */ |
| 463 | pwr_reg &= ~(WM8961_LOUT1_PGA | WM8961_ROUT1_PGA); |
| 464 | wm8961_write(codec, WM8961_PWR_MGMT_2, pwr_reg); |
| 465 | |
| 466 | /* Disable the charge pump */ |
| 467 | dev_dbg(codec->dev, "Disabling charge pump\n"); |
| 468 | wm8961_write(codec, WM8961_CHARGE_PUMP_1, |
| 469 | cp_reg & ~WM8961_CP_ENA); |
| 470 | } |
| 471 | |
| 472 | return 0; |
| 473 | } |
| 474 | |
| 475 | static int wm8961_spk_event(struct snd_soc_dapm_widget *w, |
| 476 | struct snd_kcontrol *kcontrol, int event) |
| 477 | { |
| 478 | struct snd_soc_codec *codec = w->codec; |
| 479 | u16 pwr_reg = wm8961_read(codec, WM8961_PWR_MGMT_2); |
| 480 | u16 spk_reg = wm8961_read(codec, WM8961_CLASS_D_CONTROL_1); |
| 481 | |
| 482 | if (event & SND_SOC_DAPM_POST_PMU) { |
| 483 | /* Enable the PGA */ |
| 484 | pwr_reg |= WM8961_SPKL_PGA | WM8961_SPKR_PGA; |
| 485 | wm8961_write(codec, WM8961_PWR_MGMT_2, pwr_reg); |
| 486 | |
| 487 | /* Enable the amplifier */ |
| 488 | spk_reg |= WM8961_SPKL_ENA | WM8961_SPKR_ENA; |
| 489 | wm8961_write(codec, WM8961_CLASS_D_CONTROL_1, spk_reg); |
| 490 | } |
| 491 | |
| 492 | if (event & SND_SOC_DAPM_PRE_PMD) { |
| 493 | /* Enable the amplifier */ |
| 494 | spk_reg &= ~(WM8961_SPKL_ENA | WM8961_SPKR_ENA); |
| 495 | wm8961_write(codec, WM8961_CLASS_D_CONTROL_1, spk_reg); |
| 496 | |
| 497 | /* Enable the PGA */ |
| 498 | pwr_reg &= ~(WM8961_SPKL_PGA | WM8961_SPKR_PGA); |
| 499 | wm8961_write(codec, WM8961_PWR_MGMT_2, pwr_reg); |
| 500 | } |
| 501 | |
| 502 | return 0; |
| 503 | } |
| 504 | |
| 505 | static const char *adc_hpf_text[] = { |
| 506 | "Hi-fi", "Voice 1", "Voice 2", "Voice 3", |
| 507 | }; |
| 508 | |
| 509 | static const struct soc_enum adc_hpf = |
| 510 | SOC_ENUM_SINGLE(WM8961_ADC_DAC_CONTROL_2, 7, 4, adc_hpf_text); |
| 511 | |
| 512 | static const char *dac_deemph_text[] = { |
| 513 | "None", "32kHz", "44.1kHz", "48kHz", |
| 514 | }; |
| 515 | |
| 516 | static const struct soc_enum dac_deemph = |
| 517 | SOC_ENUM_SINGLE(WM8961_ADC_DAC_CONTROL_1, 1, 4, dac_deemph_text); |
| 518 | |
| 519 | static const DECLARE_TLV_DB_SCALE(out_tlv, -12100, 100, 1); |
| 520 | static const DECLARE_TLV_DB_SCALE(hp_sec_tlv, -700, 100, 0); |
| 521 | static const DECLARE_TLV_DB_SCALE(adc_tlv, -7200, 75, 1); |
| 522 | static const DECLARE_TLV_DB_SCALE(sidetone_tlv, -3600, 300, 0); |
| 523 | static unsigned int boost_tlv[] = { |
| 524 | TLV_DB_RANGE_HEAD(4), |
| 525 | 0, 0, TLV_DB_SCALE_ITEM(0, 0, 0), |
| 526 | 1, 1, TLV_DB_SCALE_ITEM(13, 0, 0), |
| 527 | 2, 2, TLV_DB_SCALE_ITEM(20, 0, 0), |
| 528 | 3, 3, TLV_DB_SCALE_ITEM(29, 0, 0), |
| 529 | }; |
| 530 | static const DECLARE_TLV_DB_SCALE(pga_tlv, -2325, 75, 0); |
| 531 | |
| 532 | static const struct snd_kcontrol_new wm8961_snd_controls[] = { |
| 533 | SOC_DOUBLE_R_TLV("Headphone Volume", WM8961_LOUT1_VOLUME, WM8961_ROUT1_VOLUME, |
| 534 | 0, 127, 0, out_tlv), |
| 535 | SOC_DOUBLE_TLV("Headphone Secondary Volume", WM8961_ANALOGUE_HP_2, |
| 536 | 6, 3, 7, 0, hp_sec_tlv), |
| 537 | SOC_DOUBLE_R("Headphone ZC Switch", WM8961_LOUT1_VOLUME, WM8961_ROUT1_VOLUME, |
| 538 | 7, 1, 0), |
| 539 | |
| 540 | SOC_DOUBLE_R_TLV("Speaker Volume", WM8961_LOUT2_VOLUME, WM8961_ROUT2_VOLUME, |
| 541 | 0, 127, 0, out_tlv), |
| 542 | SOC_DOUBLE_R("Speaker ZC Switch", WM8961_LOUT2_VOLUME, WM8961_ROUT2_VOLUME, |
| 543 | 7, 1, 0), |
| 544 | SOC_SINGLE("Speaker AC Gain", WM8961_CLASS_D_CONTROL_2, 0, 7, 0), |
| 545 | |
| 546 | SOC_SINGLE("DAC x128 OSR Switch", WM8961_ADC_DAC_CONTROL_2, 0, 1, 0), |
| 547 | SOC_ENUM("DAC Deemphasis", dac_deemph), |
| 548 | SOC_SINGLE("DAC Soft Mute Switch", WM8961_ADC_DAC_CONTROL_2, 3, 1, 0), |
| 549 | |
| 550 | SOC_DOUBLE_R_TLV("Sidetone Volume", WM8961_DSP_SIDETONE_0, |
| 551 | WM8961_DSP_SIDETONE_1, 4, 12, 0, sidetone_tlv), |
| 552 | |
| 553 | SOC_SINGLE("ADC High Pass Filter Switch", WM8961_ADC_DAC_CONTROL_1, 0, 1, 0), |
| 554 | SOC_ENUM("ADC High Pass Filter Mode", adc_hpf), |
| 555 | |
| 556 | SOC_DOUBLE_R_TLV("Capture Volume", |
| 557 | WM8961_LEFT_ADC_VOLUME, WM8961_RIGHT_ADC_VOLUME, |
| 558 | 1, 119, 0, adc_tlv), |
| 559 | SOC_DOUBLE_R_TLV("Capture Boost Volume", |
| 560 | WM8961_ADCL_SIGNAL_PATH, WM8961_ADCR_SIGNAL_PATH, |
| 561 | 4, 3, 0, boost_tlv), |
| 562 | SOC_DOUBLE_R_TLV("Capture PGA Volume", |
| 563 | WM8961_LEFT_INPUT_VOLUME, WM8961_RIGHT_INPUT_VOLUME, |
| 564 | 0, 62, 0, pga_tlv), |
| 565 | SOC_DOUBLE_R("Capture PGA ZC Switch", |
| 566 | WM8961_LEFT_INPUT_VOLUME, WM8961_RIGHT_INPUT_VOLUME, |
| 567 | 6, 1, 1), |
| 568 | SOC_DOUBLE_R("Capture PGA Switch", |
| 569 | WM8961_LEFT_INPUT_VOLUME, WM8961_RIGHT_INPUT_VOLUME, |
| 570 | 7, 1, 1), |
| 571 | }; |
| 572 | |
| 573 | static const char *sidetone_text[] = { |
| 574 | "None", "Left", "Right" |
| 575 | }; |
| 576 | |
| 577 | static const struct soc_enum dacl_sidetone = |
| 578 | SOC_ENUM_SINGLE(WM8961_DSP_SIDETONE_0, 2, 3, sidetone_text); |
| 579 | |
| 580 | static const struct soc_enum dacr_sidetone = |
| 581 | SOC_ENUM_SINGLE(WM8961_DSP_SIDETONE_1, 2, 3, sidetone_text); |
| 582 | |
| 583 | static const struct snd_kcontrol_new dacl_mux = |
| 584 | SOC_DAPM_ENUM("DACL Sidetone", dacl_sidetone); |
| 585 | |
| 586 | static const struct snd_kcontrol_new dacr_mux = |
| 587 | SOC_DAPM_ENUM("DACR Sidetone", dacr_sidetone); |
| 588 | |
| 589 | static const struct snd_soc_dapm_widget wm8961_dapm_widgets[] = { |
| 590 | SND_SOC_DAPM_INPUT("LINPUT"), |
| 591 | SND_SOC_DAPM_INPUT("RINPUT"), |
| 592 | |
| 593 | SND_SOC_DAPM_SUPPLY("CLK_DSP", WM8961_CLOCKING2, 4, 0, NULL, 0), |
| 594 | |
| 595 | SND_SOC_DAPM_PGA("Left Input", WM8961_PWR_MGMT_1, 5, 0, NULL, 0), |
| 596 | SND_SOC_DAPM_PGA("Right Input", WM8961_PWR_MGMT_1, 4, 0, NULL, 0), |
| 597 | |
| 598 | SND_SOC_DAPM_ADC("ADCL", "HiFi Capture", WM8961_PWR_MGMT_1, 3, 0), |
| 599 | SND_SOC_DAPM_ADC("ADCR", "HiFi Capture", WM8961_PWR_MGMT_1, 2, 0), |
| 600 | |
| 601 | SND_SOC_DAPM_MICBIAS("MICBIAS", WM8961_PWR_MGMT_1, 1, 0), |
| 602 | |
| 603 | SND_SOC_DAPM_MUX("DACL Sidetone", SND_SOC_NOPM, 0, 0, &dacl_mux), |
| 604 | SND_SOC_DAPM_MUX("DACR Sidetone", SND_SOC_NOPM, 0, 0, &dacr_mux), |
| 605 | |
| 606 | SND_SOC_DAPM_DAC("DACL", "HiFi Playback", WM8961_PWR_MGMT_2, 8, 0), |
| 607 | SND_SOC_DAPM_DAC("DACR", "HiFi Playback", WM8961_PWR_MGMT_2, 7, 0), |
| 608 | |
| 609 | /* Handle as a mono path for DCS */ |
| 610 | SND_SOC_DAPM_PGA_E("Headphone Output", SND_SOC_NOPM, |
| 611 | 4, 0, NULL, 0, wm8961_hp_event, |
| 612 | SND_SOC_DAPM_POST_PMU | SND_SOC_DAPM_PRE_PMD), |
| 613 | SND_SOC_DAPM_PGA_E("Speaker Output", SND_SOC_NOPM, |
| 614 | 4, 0, NULL, 0, wm8961_spk_event, |
| 615 | SND_SOC_DAPM_POST_PMU | SND_SOC_DAPM_PRE_PMD), |
| 616 | |
| 617 | SND_SOC_DAPM_OUTPUT("HP_L"), |
| 618 | SND_SOC_DAPM_OUTPUT("HP_R"), |
| 619 | SND_SOC_DAPM_OUTPUT("SPK_LN"), |
| 620 | SND_SOC_DAPM_OUTPUT("SPK_LP"), |
| 621 | SND_SOC_DAPM_OUTPUT("SPK_RN"), |
| 622 | SND_SOC_DAPM_OUTPUT("SPK_RP"), |
| 623 | }; |
| 624 | |
| 625 | |
| 626 | static const struct snd_soc_dapm_route audio_paths[] = { |
| 627 | { "DACL", NULL, "CLK_DSP" }, |
| 628 | { "DACL", NULL, "DACL Sidetone" }, |
| 629 | { "DACR", NULL, "CLK_DSP" }, |
| 630 | { "DACR", NULL, "DACR Sidetone" }, |
| 631 | |
| 632 | { "DACL Sidetone", "Left", "ADCL" }, |
| 633 | { "DACL Sidetone", "Right", "ADCR" }, |
| 634 | |
| 635 | { "DACR Sidetone", "Left", "ADCL" }, |
| 636 | { "DACR Sidetone", "Right", "ADCR" }, |
| 637 | |
| 638 | { "HP_L", NULL, "Headphone Output" }, |
| 639 | { "HP_R", NULL, "Headphone Output" }, |
| 640 | { "Headphone Output", NULL, "DACL" }, |
| 641 | { "Headphone Output", NULL, "DACR" }, |
| 642 | |
| 643 | { "SPK_LN", NULL, "Speaker Output" }, |
| 644 | { "SPK_LP", NULL, "Speaker Output" }, |
| 645 | { "SPK_RN", NULL, "Speaker Output" }, |
| 646 | { "SPK_RP", NULL, "Speaker Output" }, |
| 647 | |
| 648 | { "Speaker Output", NULL, "DACL" }, |
| 649 | { "Speaker Output", NULL, "DACR" }, |
| 650 | |
| 651 | { "ADCL", NULL, "Left Input" }, |
| 652 | { "ADCL", NULL, "CLK_DSP" }, |
| 653 | { "ADCR", NULL, "Right Input" }, |
| 654 | { "ADCR", NULL, "CLK_DSP" }, |
| 655 | |
| 656 | { "Left Input", NULL, "LINPUT" }, |
| 657 | { "Right Input", NULL, "RINPUT" }, |
| 658 | |
| 659 | }; |
| 660 | |
| 661 | /* Values for CLK_SYS_RATE */ |
| 662 | static struct { |
| 663 | int ratio; |
| 664 | u16 val; |
| 665 | } wm8961_clk_sys_ratio[] = { |
| 666 | { 64, 0 }, |
| 667 | { 128, 1 }, |
| 668 | { 192, 2 }, |
| 669 | { 256, 3 }, |
| 670 | { 384, 4 }, |
| 671 | { 512, 5 }, |
| 672 | { 768, 6 }, |
| 673 | { 1024, 7 }, |
| 674 | { 1408, 8 }, |
| 675 | { 1536, 9 }, |
| 676 | }; |
| 677 | |
| 678 | /* Values for SAMPLE_RATE */ |
| 679 | static struct { |
| 680 | int rate; |
| 681 | u16 val; |
| 682 | } wm8961_srate[] = { |
| 683 | { 48000, 0 }, |
| 684 | { 44100, 0 }, |
| 685 | { 32000, 1 }, |
| 686 | { 22050, 2 }, |
| 687 | { 24000, 2 }, |
| 688 | { 16000, 3 }, |
| 689 | { 11250, 4 }, |
| 690 | { 12000, 4 }, |
| 691 | { 8000, 5 }, |
| 692 | }; |
| 693 | |
| 694 | static int wm8961_hw_params(struct snd_pcm_substream *substream, |
| 695 | struct snd_pcm_hw_params *params, |
| 696 | struct snd_soc_dai *dai) |
| 697 | { |
| 698 | struct snd_soc_codec *codec = dai->codec; |
| 699 | struct wm8961_priv *wm8961 = codec->private_data; |
| 700 | int i, best, target, fs; |
| 701 | u16 reg; |
| 702 | |
| 703 | fs = params_rate(params); |
| 704 | |
| 705 | if (!wm8961->sysclk) { |
| 706 | dev_err(codec->dev, "MCLK has not been specified\n"); |
| 707 | return -EINVAL; |
| 708 | } |
| 709 | |
| 710 | /* Find the closest sample rate for the filters */ |
| 711 | best = 0; |
| 712 | for (i = 0; i < ARRAY_SIZE(wm8961_srate); i++) { |
| 713 | if (abs(wm8961_srate[i].rate - fs) < |
| 714 | abs(wm8961_srate[best].rate - fs)) |
| 715 | best = i; |
| 716 | } |
| 717 | reg = wm8961_read(codec, WM8961_ADDITIONAL_CONTROL_3); |
| 718 | reg &= ~WM8961_SAMPLE_RATE_MASK; |
| 719 | reg |= wm8961_srate[best].val; |
| 720 | wm8961_write(codec, WM8961_ADDITIONAL_CONTROL_3, reg); |
| 721 | dev_dbg(codec->dev, "Selected SRATE %dHz for %dHz\n", |
| 722 | wm8961_srate[best].rate, fs); |
| 723 | |
| 724 | /* Select a CLK_SYS/fs ratio equal to or higher than required */ |
| 725 | target = wm8961->sysclk / fs; |
| 726 | |
| 727 | if (substream->stream == SNDRV_PCM_STREAM_PLAYBACK && target < 64) { |
| 728 | dev_err(codec->dev, |
| 729 | "SYSCLK must be at least 64*fs for DAC\n"); |
| 730 | return -EINVAL; |
| 731 | } |
| 732 | if (substream->stream == SNDRV_PCM_STREAM_CAPTURE && target < 256) { |
| 733 | dev_err(codec->dev, |
| 734 | "SYSCLK must be at least 256*fs for ADC\n"); |
| 735 | return -EINVAL; |
| 736 | } |
| 737 | |
| 738 | for (i = 0; i < ARRAY_SIZE(wm8961_clk_sys_ratio); i++) { |
| 739 | if (wm8961_clk_sys_ratio[i].ratio >= target) |
| 740 | break; |
| 741 | } |
| 742 | if (i == ARRAY_SIZE(wm8961_clk_sys_ratio)) { |
| 743 | dev_err(codec->dev, "Unable to generate CLK_SYS_RATE\n"); |
| 744 | return -EINVAL; |
| 745 | } |
| 746 | dev_dbg(codec->dev, "Selected CLK_SYS_RATE of %d for %d/%d=%d\n", |
| 747 | wm8961_clk_sys_ratio[i].ratio, wm8961->sysclk, fs, |
| 748 | wm8961->sysclk / fs); |
| 749 | |
| 750 | reg = wm8961_read(codec, WM8961_CLOCKING_4); |
| 751 | reg &= ~WM8961_CLK_SYS_RATE_MASK; |
| 752 | reg |= wm8961_clk_sys_ratio[i].val << WM8961_CLK_SYS_RATE_SHIFT; |
| 753 | wm8961_write(codec, WM8961_CLOCKING_4, reg); |
| 754 | |
| 755 | reg = wm8961_read(codec, WM8961_AUDIO_INTERFACE_0); |
| 756 | reg &= ~WM8961_WL_MASK; |
| 757 | switch (params_format(params)) { |
| 758 | case SNDRV_PCM_FORMAT_S16_LE: |
| 759 | break; |
| 760 | case SNDRV_PCM_FORMAT_S20_3LE: |
| 761 | reg |= 1 << WM8961_WL_SHIFT; |
| 762 | break; |
| 763 | case SNDRV_PCM_FORMAT_S24_LE: |
| 764 | reg |= 2 << WM8961_WL_SHIFT; |
| 765 | break; |
| 766 | case SNDRV_PCM_FORMAT_S32_LE: |
| 767 | reg |= 3 << WM8961_WL_SHIFT; |
| 768 | break; |
| 769 | default: |
| 770 | return -EINVAL; |
| 771 | } |
| 772 | wm8961_write(codec, WM8961_AUDIO_INTERFACE_0, reg); |
| 773 | |
| 774 | /* Sloping stop-band filter is recommended for <= 24kHz */ |
| 775 | reg = wm8961_read(codec, WM8961_ADC_DAC_CONTROL_2); |
| 776 | if (fs <= 24000) |
| 777 | reg |= WM8961_DACSLOPE; |
| 778 | else |
| 779 | reg &= WM8961_DACSLOPE; |
| 780 | wm8961_write(codec, WM8961_ADC_DAC_CONTROL_2, reg); |
| 781 | |
| 782 | return 0; |
| 783 | } |
| 784 | |
| 785 | static int wm8961_set_sysclk(struct snd_soc_dai *dai, int clk_id, |
| 786 | unsigned int freq, |
| 787 | int dir) |
| 788 | { |
| 789 | struct snd_soc_codec *codec = dai->codec; |
| 790 | struct wm8961_priv *wm8961 = codec->private_data; |
| 791 | u16 reg = wm8961_read(codec, WM8961_CLOCKING1); |
| 792 | |
| 793 | if (freq > 33000000) { |
| 794 | dev_err(codec->dev, "MCLK must be <33MHz\n"); |
| 795 | return -EINVAL; |
| 796 | } |
| 797 | |
| 798 | if (freq > 16500000) { |
| 799 | dev_dbg(codec->dev, "Using MCLK/2 for %dHz MCLK\n", freq); |
| 800 | reg |= WM8961_MCLKDIV; |
| 801 | freq /= 2; |
| 802 | } else { |
| 803 | dev_dbg(codec->dev, "Using MCLK/1 for %dHz MCLK\n", freq); |
| 804 | reg &= WM8961_MCLKDIV; |
| 805 | } |
| 806 | |
| 807 | wm8961_write(codec, WM8961_CLOCKING1, reg); |
| 808 | |
| 809 | wm8961->sysclk = freq; |
| 810 | |
| 811 | return 0; |
| 812 | } |
| 813 | |
| 814 | static int wm8961_set_fmt(struct snd_soc_dai *dai, unsigned int fmt) |
| 815 | { |
| 816 | struct snd_soc_codec *codec = dai->codec; |
| 817 | u16 aif = wm8961_read(codec, WM8961_AUDIO_INTERFACE_0); |
| 818 | |
| 819 | aif &= ~(WM8961_BCLKINV | WM8961_LRP | |
| 820 | WM8961_MS | WM8961_FORMAT_MASK); |
| 821 | |
| 822 | switch (fmt & SND_SOC_DAIFMT_MASTER_MASK) { |
| 823 | case SND_SOC_DAIFMT_CBM_CFM: |
| 824 | aif |= WM8961_MS; |
| 825 | break; |
| 826 | case SND_SOC_DAIFMT_CBS_CFS: |
| 827 | break; |
| 828 | default: |
| 829 | return -EINVAL; |
| 830 | } |
| 831 | |
| 832 | switch (fmt & SND_SOC_DAIFMT_FORMAT_MASK) { |
| 833 | case SND_SOC_DAIFMT_RIGHT_J: |
| 834 | break; |
| 835 | |
| 836 | case SND_SOC_DAIFMT_LEFT_J: |
| 837 | aif |= 1; |
| 838 | break; |
| 839 | |
| 840 | case SND_SOC_DAIFMT_I2S: |
| 841 | aif |= 2; |
| 842 | break; |
| 843 | |
| 844 | case SND_SOC_DAIFMT_DSP_B: |
| 845 | aif |= WM8961_LRP; |
| 846 | case SND_SOC_DAIFMT_DSP_A: |
| 847 | aif |= 3; |
| 848 | switch (fmt & SND_SOC_DAIFMT_INV_MASK) { |
| 849 | case SND_SOC_DAIFMT_NB_NF: |
| 850 | case SND_SOC_DAIFMT_IB_NF: |
| 851 | break; |
| 852 | default: |
| 853 | return -EINVAL; |
| 854 | } |
| 855 | break; |
| 856 | |
| 857 | default: |
| 858 | return -EINVAL; |
| 859 | } |
| 860 | |
| 861 | switch (fmt & SND_SOC_DAIFMT_INV_MASK) { |
| 862 | case SND_SOC_DAIFMT_NB_NF: |
| 863 | break; |
| 864 | case SND_SOC_DAIFMT_NB_IF: |
| 865 | aif |= WM8961_LRP; |
| 866 | break; |
| 867 | case SND_SOC_DAIFMT_IB_NF: |
| 868 | aif |= WM8961_BCLKINV; |
| 869 | break; |
| 870 | case SND_SOC_DAIFMT_IB_IF: |
| 871 | aif |= WM8961_BCLKINV | WM8961_LRP; |
| 872 | break; |
| 873 | default: |
| 874 | return -EINVAL; |
| 875 | } |
| 876 | |
| 877 | return wm8961_write(codec, WM8961_AUDIO_INTERFACE_0, aif); |
| 878 | } |
| 879 | |
| 880 | static int wm8961_set_tristate(struct snd_soc_dai *dai, int tristate) |
| 881 | { |
| 882 | struct snd_soc_codec *codec = dai->codec; |
| 883 | u16 reg = wm8961_read(codec, WM8961_ADDITIONAL_CONTROL_2); |
| 884 | |
| 885 | if (tristate) |
| 886 | reg |= WM8961_TRIS; |
| 887 | else |
| 888 | reg &= ~WM8961_TRIS; |
| 889 | |
| 890 | return wm8961_write(codec, WM8961_ADDITIONAL_CONTROL_2, reg); |
| 891 | } |
| 892 | |
| 893 | static int wm8961_digital_mute(struct snd_soc_dai *dai, int mute) |
| 894 | { |
| 895 | struct snd_soc_codec *codec = dai->codec; |
| 896 | u16 reg = wm8961_read(codec, WM8961_ADC_DAC_CONTROL_1); |
| 897 | |
| 898 | if (mute) |
| 899 | reg |= WM8961_DACMU; |
| 900 | else |
| 901 | reg &= ~WM8961_DACMU; |
| 902 | |
| 903 | msleep(17); |
| 904 | |
| 905 | return wm8961_write(codec, WM8961_ADC_DAC_CONTROL_1, reg); |
| 906 | } |
| 907 | |
| 908 | static int wm8961_set_clkdiv(struct snd_soc_dai *dai, int div_id, int div) |
| 909 | { |
| 910 | struct snd_soc_codec *codec = dai->codec; |
| 911 | u16 reg; |
| 912 | |
| 913 | switch (div_id) { |
| 914 | case WM8961_BCLK: |
| 915 | reg = wm8961_read(codec, WM8961_CLOCKING2); |
| 916 | reg &= ~WM8961_BCLKDIV_MASK; |
| 917 | reg |= div; |
| 918 | wm8961_write(codec, WM8961_CLOCKING2, reg); |
| 919 | break; |
| 920 | |
| 921 | case WM8961_LRCLK: |
| 922 | reg = wm8961_read(codec, WM8961_AUDIO_INTERFACE_2); |
| 923 | reg &= ~WM8961_LRCLK_RATE_MASK; |
| 924 | reg |= div; |
| 925 | wm8961_write(codec, WM8961_AUDIO_INTERFACE_2, reg); |
| 926 | break; |
| 927 | |
| 928 | default: |
| 929 | return -EINVAL; |
| 930 | } |
| 931 | |
| 932 | return 0; |
| 933 | } |
| 934 | |
| 935 | static int wm8961_set_bias_level(struct snd_soc_codec *codec, |
| 936 | enum snd_soc_bias_level level) |
| 937 | { |
| 938 | u16 reg; |
| 939 | |
| 940 | /* This is all slightly unusual since we have no bypass paths |
| 941 | * and the output amplifier structure means we can just slam |
| 942 | * the biases straight up rather than having to ramp them |
| 943 | * slowly. |
| 944 | */ |
| 945 | switch (level) { |
| 946 | case SND_SOC_BIAS_ON: |
| 947 | break; |
| 948 | |
| 949 | case SND_SOC_BIAS_PREPARE: |
| 950 | if (codec->bias_level == SND_SOC_BIAS_STANDBY) { |
| 951 | /* Enable bias generation */ |
| 952 | reg = wm8961_read(codec, WM8961_ANTI_POP); |
| 953 | reg |= WM8961_BUFIOEN | WM8961_BUFDCOPEN; |
| 954 | wm8961_write(codec, WM8961_ANTI_POP, reg); |
| 955 | |
| 956 | /* VMID=2*50k, VREF */ |
| 957 | reg = wm8961_read(codec, WM8961_PWR_MGMT_1); |
| 958 | reg &= ~WM8961_VMIDSEL_MASK; |
| 959 | reg |= (1 << WM8961_VMIDSEL_SHIFT) | WM8961_VREF; |
| 960 | wm8961_write(codec, WM8961_PWR_MGMT_1, reg); |
| 961 | } |
| 962 | break; |
| 963 | |
| 964 | case SND_SOC_BIAS_STANDBY: |
| 965 | if (codec->bias_level == SND_SOC_BIAS_PREPARE) { |
| 966 | /* VREF off */ |
| 967 | reg = wm8961_read(codec, WM8961_PWR_MGMT_1); |
| 968 | reg &= ~WM8961_VREF; |
| 969 | wm8961_write(codec, WM8961_PWR_MGMT_1, reg); |
| 970 | |
| 971 | /* Bias generation off */ |
| 972 | reg = wm8961_read(codec, WM8961_ANTI_POP); |
| 973 | reg &= ~(WM8961_BUFIOEN | WM8961_BUFDCOPEN); |
| 974 | wm8961_write(codec, WM8961_ANTI_POP, reg); |
| 975 | |
| 976 | /* VMID off */ |
| 977 | reg = wm8961_read(codec, WM8961_PWR_MGMT_1); |
| 978 | reg &= ~WM8961_VMIDSEL_MASK; |
| 979 | wm8961_write(codec, WM8961_PWR_MGMT_1, reg); |
| 980 | } |
| 981 | break; |
| 982 | |
| 983 | case SND_SOC_BIAS_OFF: |
| 984 | break; |
| 985 | } |
| 986 | |
| 987 | codec->bias_level = level; |
| 988 | |
| 989 | return 0; |
| 990 | } |
| 991 | |
| 992 | |
| 993 | #define WM8961_RATES SNDRV_PCM_RATE_8000_48000 |
| 994 | |
| 995 | #define WM8961_FORMATS \ |
| 996 | (SNDRV_PCM_FMTBIT_S16_LE | SNDRV_PCM_FMTBIT_S20_3LE | \ |
| 997 | SNDRV_PCM_FMTBIT_S24_LE) |
| 998 | |
| 999 | static struct snd_soc_dai_ops wm8961_dai_ops = { |
| 1000 | .hw_params = wm8961_hw_params, |
| 1001 | .set_sysclk = wm8961_set_sysclk, |
| 1002 | .set_fmt = wm8961_set_fmt, |
| 1003 | .digital_mute = wm8961_digital_mute, |
| 1004 | .set_tristate = wm8961_set_tristate, |
| 1005 | .set_clkdiv = wm8961_set_clkdiv, |
| 1006 | }; |
| 1007 | |
| 1008 | struct snd_soc_dai wm8961_dai = { |
| 1009 | .name = "WM8961", |
| 1010 | .playback = { |
| 1011 | .stream_name = "HiFi Playback", |
| 1012 | .channels_min = 1, |
| 1013 | .channels_max = 2, |
| 1014 | .rates = WM8961_RATES, |
| 1015 | .formats = WM8961_FORMATS,}, |
| 1016 | .capture = { |
| 1017 | .stream_name = "HiFi Capture", |
| 1018 | .channels_min = 1, |
| 1019 | .channels_max = 2, |
| 1020 | .rates = WM8961_RATES, |
| 1021 | .formats = WM8961_FORMATS,}, |
| 1022 | .ops = &wm8961_dai_ops, |
| 1023 | }; |
| 1024 | EXPORT_SYMBOL_GPL(wm8961_dai); |
| 1025 | |
| 1026 | |
| 1027 | static struct snd_soc_codec *wm8961_codec; |
| 1028 | |
| 1029 | static int wm8961_probe(struct platform_device *pdev) |
| 1030 | { |
| 1031 | struct snd_soc_device *socdev = platform_get_drvdata(pdev); |
| 1032 | struct snd_soc_codec *codec; |
| 1033 | int ret = 0; |
| 1034 | |
| 1035 | if (wm8961_codec == NULL) { |
| 1036 | dev_err(&pdev->dev, "Codec device not registered\n"); |
| 1037 | return -ENODEV; |
| 1038 | } |
| 1039 | |
| 1040 | socdev->card->codec = wm8961_codec; |
| 1041 | codec = wm8961_codec; |
| 1042 | |
| 1043 | /* register pcms */ |
| 1044 | ret = snd_soc_new_pcms(socdev, SNDRV_DEFAULT_IDX1, SNDRV_DEFAULT_STR1); |
| 1045 | if (ret < 0) { |
| 1046 | dev_err(codec->dev, "failed to create pcms: %d\n", ret); |
| 1047 | goto pcm_err; |
| 1048 | } |
| 1049 | |
| 1050 | snd_soc_add_controls(codec, wm8961_snd_controls, |
| 1051 | ARRAY_SIZE(wm8961_snd_controls)); |
| 1052 | snd_soc_dapm_new_controls(codec, wm8961_dapm_widgets, |
| 1053 | ARRAY_SIZE(wm8961_dapm_widgets)); |
| 1054 | snd_soc_dapm_add_routes(codec, audio_paths, ARRAY_SIZE(audio_paths)); |
| 1055 | snd_soc_dapm_new_widgets(codec); |
| 1056 | |
| 1057 | ret = snd_soc_init_card(socdev); |
| 1058 | if (ret < 0) { |
| 1059 | dev_err(codec->dev, "failed to register card: %d\n", ret); |
| 1060 | goto card_err; |
| 1061 | } |
| 1062 | |
| 1063 | return ret; |
| 1064 | |
| 1065 | card_err: |
| 1066 | snd_soc_free_pcms(socdev); |
| 1067 | snd_soc_dapm_free(socdev); |
| 1068 | pcm_err: |
| 1069 | return ret; |
| 1070 | } |
| 1071 | |
| 1072 | static int wm8961_remove(struct platform_device *pdev) |
| 1073 | { |
| 1074 | struct snd_soc_device *socdev = platform_get_drvdata(pdev); |
| 1075 | |
| 1076 | snd_soc_free_pcms(socdev); |
| 1077 | snd_soc_dapm_free(socdev); |
| 1078 | |
| 1079 | return 0; |
| 1080 | } |
| 1081 | |
| 1082 | #ifdef CONFIG_PM |
| 1083 | static int wm8961_suspend(struct platform_device *pdev, pm_message_t state) |
| 1084 | { |
| 1085 | struct snd_soc_device *socdev = platform_get_drvdata(pdev); |
| 1086 | struct snd_soc_codec *codec = socdev->card->codec; |
| 1087 | |
| 1088 | wm8961_set_bias_level(codec, SND_SOC_BIAS_OFF); |
| 1089 | |
| 1090 | return 0; |
| 1091 | } |
| 1092 | |
| 1093 | static int wm8961_resume(struct platform_device *pdev) |
| 1094 | { |
| 1095 | struct snd_soc_device *socdev = platform_get_drvdata(pdev); |
| 1096 | struct snd_soc_codec *codec = socdev->card->codec; |
| 1097 | u16 *reg_cache = codec->reg_cache; |
| 1098 | int i; |
| 1099 | |
| 1100 | for (i = 0; i < codec->reg_cache_size; i++) { |
| 1101 | if (i == WM8961_SOFTWARE_RESET) |
| 1102 | continue; |
| 1103 | |
| 1104 | wm8961_write(codec, i, reg_cache[i]); |
| 1105 | } |
| 1106 | |
| 1107 | wm8961_set_bias_level(codec, SND_SOC_BIAS_STANDBY); |
| 1108 | |
| 1109 | return 0; |
| 1110 | } |
| 1111 | #else |
| 1112 | #define wm8961_suspend NULL |
| 1113 | #define wm8961_resume NULL |
| 1114 | #endif |
| 1115 | |
| 1116 | struct snd_soc_codec_device soc_codec_dev_wm8961 = { |
| 1117 | .probe = wm8961_probe, |
| 1118 | .remove = wm8961_remove, |
| 1119 | .suspend = wm8961_suspend, |
| 1120 | .resume = wm8961_resume, |
| 1121 | }; |
| 1122 | EXPORT_SYMBOL_GPL(soc_codec_dev_wm8961); |
| 1123 | |
| 1124 | static int wm8961_register(struct wm8961_priv *wm8961) |
| 1125 | { |
| 1126 | struct snd_soc_codec *codec = &wm8961->codec; |
| 1127 | int ret; |
| 1128 | u16 reg; |
| 1129 | |
| 1130 | if (wm8961_codec) { |
| 1131 | dev_err(codec->dev, "Another WM8961 is registered\n"); |
| 1132 | ret = -EINVAL; |
| 1133 | goto err; |
| 1134 | } |
| 1135 | |
| 1136 | mutex_init(&codec->mutex); |
| 1137 | INIT_LIST_HEAD(&codec->dapm_widgets); |
| 1138 | INIT_LIST_HEAD(&codec->dapm_paths); |
| 1139 | |
| 1140 | codec->private_data = wm8961; |
| 1141 | codec->name = "WM8961"; |
| 1142 | codec->owner = THIS_MODULE; |
| 1143 | codec->read = wm8961_read; |
| 1144 | codec->write = wm8961_write; |
| 1145 | codec->dai = &wm8961_dai; |
| 1146 | codec->num_dai = 1; |
| 1147 | codec->reg_cache_size = ARRAY_SIZE(wm8961->reg_cache); |
| 1148 | codec->reg_cache = &wm8961->reg_cache; |
| 1149 | codec->bias_level = SND_SOC_BIAS_OFF; |
| 1150 | codec->set_bias_level = wm8961_set_bias_level; |
| 1151 | |
| 1152 | memcpy(codec->reg_cache, wm8961_reg_defaults, |
| 1153 | sizeof(wm8961_reg_defaults)); |
| 1154 | |
| 1155 | reg = wm8961_read_hw(codec, WM8961_SOFTWARE_RESET); |
| 1156 | if (reg != 0x1801) { |
| 1157 | dev_err(codec->dev, "Device is not a WM8961: ID=0x%x\n", reg); |
| 1158 | ret = -EINVAL; |
| 1159 | goto err; |
| 1160 | } |
| 1161 | |
| 1162 | reg = wm8961_read_hw(codec, WM8961_RIGHT_INPUT_VOLUME); |
| 1163 | dev_info(codec->dev, "WM8961 family %d revision %c\n", |
| 1164 | (reg & WM8961_DEVICE_ID_MASK) >> WM8961_DEVICE_ID_SHIFT, |
| 1165 | ((reg & WM8961_CHIP_REV_MASK) >> WM8961_CHIP_REV_SHIFT) |
| 1166 | + 'A'); |
| 1167 | |
| 1168 | ret = wm8961_reset(codec); |
| 1169 | if (ret < 0) { |
| 1170 | dev_err(codec->dev, "Failed to issue reset\n"); |
| 1171 | return ret; |
| 1172 | } |
| 1173 | |
| 1174 | /* Enable class W */ |
| 1175 | reg = wm8961_read(codec, WM8961_CHARGE_PUMP_B); |
| 1176 | reg |= WM8961_CP_DYN_PWR_MASK; |
| 1177 | wm8961_write(codec, WM8961_CHARGE_PUMP_B, reg); |
| 1178 | |
| 1179 | /* Latch volume update bits (right channel only, we always |
| 1180 | * write both out) and default ZC on. */ |
| 1181 | reg = wm8961_read(codec, WM8961_ROUT1_VOLUME); |
| 1182 | wm8961_write(codec, WM8961_ROUT1_VOLUME, |
| 1183 | reg | WM8961_LO1ZC | WM8961_OUT1VU); |
| 1184 | wm8961_write(codec, WM8961_LOUT1_VOLUME, reg | WM8961_LO1ZC); |
| 1185 | reg = wm8961_read(codec, WM8961_ROUT2_VOLUME); |
| 1186 | wm8961_write(codec, WM8961_ROUT2_VOLUME, |
| 1187 | reg | WM8961_SPKRZC | WM8961_SPKVU); |
| 1188 | wm8961_write(codec, WM8961_LOUT2_VOLUME, reg | WM8961_SPKLZC); |
| 1189 | |
| 1190 | reg = wm8961_read(codec, WM8961_RIGHT_ADC_VOLUME); |
| 1191 | wm8961_write(codec, WM8961_RIGHT_ADC_VOLUME, reg | WM8961_ADCVU); |
| 1192 | reg = wm8961_read(codec, WM8961_RIGHT_INPUT_VOLUME); |
| 1193 | wm8961_write(codec, WM8961_RIGHT_INPUT_VOLUME, reg | WM8961_IPVU); |
| 1194 | |
| 1195 | /* Use soft mute by default */ |
| 1196 | reg = wm8961_read(codec, WM8961_ADC_DAC_CONTROL_2); |
| 1197 | reg |= WM8961_DACSMM; |
| 1198 | wm8961_write(codec, WM8961_ADC_DAC_CONTROL_2, reg); |
| 1199 | |
| 1200 | /* Use automatic clocking mode by default; for now this is all |
| 1201 | * we support. |
| 1202 | */ |
| 1203 | reg = wm8961_read(codec, WM8961_CLOCKING_3); |
| 1204 | reg &= ~WM8961_MANUAL_MODE; |
| 1205 | wm8961_write(codec, WM8961_CLOCKING_3, reg); |
| 1206 | |
| 1207 | wm8961_set_bias_level(codec, SND_SOC_BIAS_STANDBY); |
| 1208 | |
| 1209 | wm8961_dai.dev = codec->dev; |
| 1210 | |
| 1211 | wm8961_codec = codec; |
| 1212 | |
| 1213 | ret = snd_soc_register_codec(codec); |
| 1214 | if (ret != 0) { |
| 1215 | dev_err(codec->dev, "Failed to register codec: %d\n", ret); |
| 1216 | return ret; |
| 1217 | } |
| 1218 | |
| 1219 | ret = snd_soc_register_dai(&wm8961_dai); |
| 1220 | if (ret != 0) { |
| 1221 | dev_err(codec->dev, "Failed to register DAI: %d\n", ret); |
| 1222 | snd_soc_unregister_codec(codec); |
| 1223 | return ret; |
| 1224 | } |
| 1225 | |
| 1226 | return 0; |
| 1227 | |
| 1228 | err: |
| 1229 | kfree(wm8961); |
| 1230 | return ret; |
| 1231 | } |
| 1232 | |
| 1233 | static void wm8961_unregister(struct wm8961_priv *wm8961) |
| 1234 | { |
| 1235 | wm8961_set_bias_level(&wm8961->codec, SND_SOC_BIAS_OFF); |
| 1236 | snd_soc_unregister_dai(&wm8961_dai); |
| 1237 | snd_soc_unregister_codec(&wm8961->codec); |
| 1238 | kfree(wm8961); |
| 1239 | wm8961_codec = NULL; |
| 1240 | } |
| 1241 | |
| 1242 | static __devinit int wm8961_i2c_probe(struct i2c_client *i2c, |
| 1243 | const struct i2c_device_id *id) |
| 1244 | { |
| 1245 | struct wm8961_priv *wm8961; |
| 1246 | struct snd_soc_codec *codec; |
| 1247 | |
| 1248 | wm8961 = kzalloc(sizeof(struct wm8961_priv), GFP_KERNEL); |
| 1249 | if (wm8961 == NULL) |
| 1250 | return -ENOMEM; |
| 1251 | |
| 1252 | codec = &wm8961->codec; |
| 1253 | codec->hw_write = (hw_write_t)i2c_master_send; |
| 1254 | |
| 1255 | i2c_set_clientdata(i2c, wm8961); |
| 1256 | codec->control_data = i2c; |
| 1257 | |
| 1258 | codec->dev = &i2c->dev; |
| 1259 | |
| 1260 | return wm8961_register(wm8961); |
| 1261 | } |
| 1262 | |
| 1263 | static __devexit int wm8961_i2c_remove(struct i2c_client *client) |
| 1264 | { |
| 1265 | struct wm8961_priv *wm8961 = i2c_get_clientdata(client); |
| 1266 | wm8961_unregister(wm8961); |
| 1267 | return 0; |
| 1268 | } |
| 1269 | |
| 1270 | static const struct i2c_device_id wm8961_i2c_id[] = { |
| 1271 | { "wm8961", 0 }, |
| 1272 | { } |
| 1273 | }; |
| 1274 | MODULE_DEVICE_TABLE(i2c, wm8961_i2c_id); |
| 1275 | |
| 1276 | static struct i2c_driver wm8961_i2c_driver = { |
| 1277 | .driver = { |
| 1278 | .name = "wm8961", |
| 1279 | .owner = THIS_MODULE, |
| 1280 | }, |
| 1281 | .probe = wm8961_i2c_probe, |
| 1282 | .remove = __devexit_p(wm8961_i2c_remove), |
| 1283 | .id_table = wm8961_i2c_id, |
| 1284 | }; |
| 1285 | |
| 1286 | static int __init wm8961_modinit(void) |
| 1287 | { |
| 1288 | int ret; |
| 1289 | |
| 1290 | ret = i2c_add_driver(&wm8961_i2c_driver); |
| 1291 | if (ret != 0) { |
| 1292 | printk(KERN_ERR "Failed to register WM8961 I2C driver: %d\n", |
| 1293 | ret); |
| 1294 | } |
| 1295 | |
| 1296 | return ret; |
| 1297 | } |
| 1298 | module_init(wm8961_modinit); |
| 1299 | |
| 1300 | static void __exit wm8961_exit(void) |
| 1301 | { |
| 1302 | i2c_del_driver(&wm8961_i2c_driver); |
| 1303 | } |
| 1304 | module_exit(wm8961_exit); |
| 1305 | |
| 1306 | |
| 1307 | MODULE_DESCRIPTION("ASoC WM8961 driver"); |
| 1308 | MODULE_AUTHOR("Mark Brown <broonie@opensource.wolfsonmicro.com>"); |
| 1309 | MODULE_LICENSE("GPL"); |