Jacek Anaszewski | 42bd6f5 | 2015-06-19 00:31:47 -0700 | [diff] [blame] | 1 | /* |
| 2 | * V4L2 flash LED sub-device registration helpers. |
| 3 | * |
| 4 | * Copyright (C) 2015 Samsung Electronics Co., Ltd |
| 5 | * Author: Jacek Anaszewski <j.anaszewski@samsung.com> |
| 6 | * |
| 7 | * This program is free software; you can redistribute it and/or modify |
| 8 | * it under the terms of the GNU General Public License version 2 as |
| 9 | * published by the Free Software Foundation. |
| 10 | */ |
| 11 | |
| 12 | #include <linux/led-class-flash.h> |
| 13 | #include <linux/module.h> |
| 14 | #include <linux/mutex.h> |
| 15 | #include <linux/of.h> |
| 16 | #include <linux/slab.h> |
| 17 | #include <linux/types.h> |
| 18 | #include <media/v4l2-flash-led-class.h> |
| 19 | |
| 20 | #define has_flash_op(v4l2_flash, op) \ |
| 21 | (v4l2_flash && v4l2_flash->ops->op) |
| 22 | |
| 23 | #define call_flash_op(v4l2_flash, op, arg) \ |
| 24 | (has_flash_op(v4l2_flash, op) ? \ |
| 25 | v4l2_flash->ops->op(v4l2_flash, arg) : \ |
| 26 | -EINVAL) |
| 27 | |
| 28 | enum ctrl_init_data_id { |
| 29 | LED_MODE, |
| 30 | TORCH_INTENSITY, |
| 31 | FLASH_INTENSITY, |
| 32 | INDICATOR_INTENSITY, |
| 33 | FLASH_TIMEOUT, |
| 34 | STROBE_SOURCE, |
| 35 | /* |
| 36 | * Only above values are applicable to |
| 37 | * the 'ctrls' array in the struct v4l2_flash. |
| 38 | */ |
| 39 | FLASH_STROBE, |
| 40 | STROBE_STOP, |
| 41 | STROBE_STATUS, |
| 42 | FLASH_FAULT, |
| 43 | NUM_FLASH_CTRLS, |
| 44 | }; |
| 45 | |
| 46 | static enum led_brightness __intensity_to_led_brightness( |
| 47 | struct v4l2_ctrl *ctrl, s32 intensity) |
| 48 | { |
| 49 | intensity -= ctrl->minimum; |
| 50 | intensity /= (u32) ctrl->step; |
| 51 | |
| 52 | /* |
| 53 | * Indicator LEDs, unlike torch LEDs, are turned on/off basing on |
| 54 | * the state of V4L2_CID_FLASH_INDICATOR_INTENSITY control only. |
| 55 | * Therefore it must be possible to set it to 0 level which in |
| 56 | * the LED subsystem reflects LED_OFF state. |
| 57 | */ |
| 58 | if (ctrl->minimum) |
| 59 | ++intensity; |
| 60 | |
| 61 | return intensity; |
| 62 | } |
| 63 | |
| 64 | static s32 __led_brightness_to_intensity(struct v4l2_ctrl *ctrl, |
| 65 | enum led_brightness brightness) |
| 66 | { |
| 67 | /* |
| 68 | * Indicator LEDs, unlike torch LEDs, are turned on/off basing on |
| 69 | * the state of V4L2_CID_FLASH_INDICATOR_INTENSITY control only. |
| 70 | * Do not decrement brightness read from the LED subsystem for |
| 71 | * indicator LED as it may equal 0. For torch LEDs this function |
| 72 | * is called only when V4L2_FLASH_LED_MODE_TORCH is set and the |
| 73 | * brightness read is guaranteed to be greater than 0. In the mode |
| 74 | * V4L2_FLASH_LED_MODE_NONE the cached torch intensity value is used. |
| 75 | */ |
| 76 | if (ctrl->id != V4L2_CID_FLASH_INDICATOR_INTENSITY) |
| 77 | --brightness; |
| 78 | |
| 79 | return (brightness * ctrl->step) + ctrl->minimum; |
| 80 | } |
| 81 | |
| 82 | static void v4l2_flash_set_led_brightness(struct v4l2_flash *v4l2_flash, |
| 83 | struct v4l2_ctrl *ctrl) |
| 84 | { |
| 85 | struct v4l2_ctrl **ctrls = v4l2_flash->ctrls; |
| 86 | enum led_brightness brightness; |
| 87 | |
| 88 | if (has_flash_op(v4l2_flash, intensity_to_led_brightness)) |
| 89 | brightness = call_flash_op(v4l2_flash, |
| 90 | intensity_to_led_brightness, |
| 91 | ctrl->val); |
| 92 | else |
| 93 | brightness = __intensity_to_led_brightness(ctrl, ctrl->val); |
| 94 | /* |
| 95 | * In case a LED Flash class driver provides ops for custom |
| 96 | * brightness <-> intensity conversion, it also must have defined |
| 97 | * related v4l2 control step == 1. In such a case a backward conversion |
| 98 | * from led brightness to v4l2 intensity is required to find out the |
| 99 | * the aligned intensity value. |
| 100 | */ |
| 101 | if (has_flash_op(v4l2_flash, led_brightness_to_intensity)) |
| 102 | ctrl->val = call_flash_op(v4l2_flash, |
| 103 | led_brightness_to_intensity, |
| 104 | brightness); |
| 105 | |
| 106 | if (ctrl == ctrls[TORCH_INTENSITY]) { |
| 107 | if (ctrls[LED_MODE]->val != V4L2_FLASH_LED_MODE_TORCH) |
| 108 | return; |
| 109 | |
Jacek Anaszewski | fa1706c | 2015-10-07 11:10:48 +0200 | [diff] [blame] | 110 | led_set_brightness_sync(&v4l2_flash->fled_cdev->led_cdev, |
Jacek Anaszewski | 42bd6f5 | 2015-06-19 00:31:47 -0700 | [diff] [blame] | 111 | brightness); |
| 112 | } else { |
Jacek Anaszewski | fa1706c | 2015-10-07 11:10:48 +0200 | [diff] [blame] | 113 | led_set_brightness_sync(&v4l2_flash->iled_cdev->led_cdev, |
Jacek Anaszewski | 42bd6f5 | 2015-06-19 00:31:47 -0700 | [diff] [blame] | 114 | brightness); |
| 115 | } |
| 116 | } |
| 117 | |
| 118 | static int v4l2_flash_update_led_brightness(struct v4l2_flash *v4l2_flash, |
| 119 | struct v4l2_ctrl *ctrl) |
| 120 | { |
| 121 | struct v4l2_ctrl **ctrls = v4l2_flash->ctrls; |
| 122 | struct led_classdev *led_cdev; |
| 123 | int ret; |
| 124 | |
| 125 | if (ctrl == ctrls[TORCH_INTENSITY]) { |
| 126 | /* |
| 127 | * Update torch brightness only if in TORCH_MODE. In other modes |
| 128 | * torch led is turned off, which would spuriously inform the |
| 129 | * user space that V4L2_CID_FLASH_TORCH_INTENSITY control value |
| 130 | * has changed to 0. |
| 131 | */ |
| 132 | if (ctrls[LED_MODE]->val != V4L2_FLASH_LED_MODE_TORCH) |
| 133 | return 0; |
| 134 | led_cdev = &v4l2_flash->fled_cdev->led_cdev; |
| 135 | } else { |
| 136 | led_cdev = &v4l2_flash->iled_cdev->led_cdev; |
| 137 | } |
| 138 | |
| 139 | ret = led_update_brightness(led_cdev); |
| 140 | if (ret < 0) |
| 141 | return ret; |
| 142 | |
| 143 | if (has_flash_op(v4l2_flash, led_brightness_to_intensity)) |
| 144 | ctrl->val = call_flash_op(v4l2_flash, |
| 145 | led_brightness_to_intensity, |
| 146 | led_cdev->brightness); |
| 147 | else |
| 148 | ctrl->val = __led_brightness_to_intensity(ctrl, |
| 149 | led_cdev->brightness); |
| 150 | |
| 151 | return 0; |
| 152 | } |
| 153 | |
| 154 | static int v4l2_flash_g_volatile_ctrl(struct v4l2_ctrl *c) |
| 155 | { |
| 156 | struct v4l2_flash *v4l2_flash = v4l2_ctrl_to_v4l2_flash(c); |
| 157 | struct led_classdev_flash *fled_cdev = v4l2_flash->fled_cdev; |
| 158 | bool is_strobing; |
| 159 | int ret; |
| 160 | |
| 161 | switch (c->id) { |
| 162 | case V4L2_CID_FLASH_TORCH_INTENSITY: |
| 163 | case V4L2_CID_FLASH_INDICATOR_INTENSITY: |
| 164 | return v4l2_flash_update_led_brightness(v4l2_flash, c); |
| 165 | case V4L2_CID_FLASH_INTENSITY: |
| 166 | ret = led_update_flash_brightness(fled_cdev); |
| 167 | if (ret < 0) |
| 168 | return ret; |
| 169 | /* |
| 170 | * No conversion is needed as LED Flash class also uses |
| 171 | * microamperes for flash intensity units. |
| 172 | */ |
| 173 | c->val = fled_cdev->brightness.val; |
| 174 | return 0; |
| 175 | case V4L2_CID_FLASH_STROBE_STATUS: |
| 176 | ret = led_get_flash_strobe(fled_cdev, &is_strobing); |
| 177 | if (ret < 0) |
| 178 | return ret; |
| 179 | c->val = is_strobing; |
| 180 | return 0; |
| 181 | case V4L2_CID_FLASH_FAULT: |
| 182 | /* LED faults map directly to V4L2 flash faults */ |
| 183 | return led_get_flash_fault(fled_cdev, &c->val); |
| 184 | default: |
| 185 | return -EINVAL; |
| 186 | } |
| 187 | } |
| 188 | |
| 189 | static bool __software_strobe_mode_inactive(struct v4l2_ctrl **ctrls) |
| 190 | { |
| 191 | return ((ctrls[LED_MODE]->val != V4L2_FLASH_LED_MODE_FLASH) || |
| 192 | (ctrls[STROBE_SOURCE] && (ctrls[STROBE_SOURCE]->val != |
| 193 | V4L2_FLASH_STROBE_SOURCE_SOFTWARE))); |
| 194 | } |
| 195 | |
| 196 | static int v4l2_flash_s_ctrl(struct v4l2_ctrl *c) |
| 197 | { |
| 198 | struct v4l2_flash *v4l2_flash = v4l2_ctrl_to_v4l2_flash(c); |
| 199 | struct led_classdev_flash *fled_cdev = v4l2_flash->fled_cdev; |
| 200 | struct led_classdev *led_cdev = &fled_cdev->led_cdev; |
| 201 | struct v4l2_ctrl **ctrls = v4l2_flash->ctrls; |
| 202 | bool external_strobe; |
| 203 | int ret = 0; |
| 204 | |
| 205 | switch (c->id) { |
| 206 | case V4L2_CID_FLASH_LED_MODE: |
| 207 | switch (c->val) { |
| 208 | case V4L2_FLASH_LED_MODE_NONE: |
Jacek Anaszewski | fa1706c | 2015-10-07 11:10:48 +0200 | [diff] [blame] | 209 | led_set_brightness_sync(led_cdev, LED_OFF); |
Jacek Anaszewski | 42bd6f5 | 2015-06-19 00:31:47 -0700 | [diff] [blame] | 210 | return led_set_flash_strobe(fled_cdev, false); |
| 211 | case V4L2_FLASH_LED_MODE_FLASH: |
| 212 | /* Turn the torch LED off */ |
Jacek Anaszewski | fa1706c | 2015-10-07 11:10:48 +0200 | [diff] [blame] | 213 | led_set_brightness_sync(led_cdev, LED_OFF); |
Jacek Anaszewski | 42bd6f5 | 2015-06-19 00:31:47 -0700 | [diff] [blame] | 214 | if (ctrls[STROBE_SOURCE]) { |
| 215 | external_strobe = (ctrls[STROBE_SOURCE]->val == |
| 216 | V4L2_FLASH_STROBE_SOURCE_EXTERNAL); |
| 217 | |
| 218 | ret = call_flash_op(v4l2_flash, |
| 219 | external_strobe_set, |
| 220 | external_strobe); |
| 221 | } |
| 222 | return ret; |
| 223 | case V4L2_FLASH_LED_MODE_TORCH: |
| 224 | if (ctrls[STROBE_SOURCE]) { |
| 225 | ret = call_flash_op(v4l2_flash, |
| 226 | external_strobe_set, |
| 227 | false); |
| 228 | if (ret < 0) |
| 229 | return ret; |
| 230 | } |
| 231 | /* Stop flash strobing */ |
| 232 | ret = led_set_flash_strobe(fled_cdev, false); |
| 233 | if (ret < 0) |
| 234 | return ret; |
| 235 | |
| 236 | v4l2_flash_set_led_brightness(v4l2_flash, |
| 237 | ctrls[TORCH_INTENSITY]); |
| 238 | return 0; |
| 239 | } |
| 240 | break; |
| 241 | case V4L2_CID_FLASH_STROBE_SOURCE: |
| 242 | external_strobe = (c->val == V4L2_FLASH_STROBE_SOURCE_EXTERNAL); |
| 243 | /* |
| 244 | * For some hardware arrangements setting strobe source may |
| 245 | * affect torch mode. Therefore, if not in the flash mode, |
| 246 | * cache only this setting. It will be applied upon switching |
| 247 | * to flash mode. |
| 248 | */ |
| 249 | if (ctrls[LED_MODE]->val != V4L2_FLASH_LED_MODE_FLASH) |
| 250 | return 0; |
| 251 | |
| 252 | return call_flash_op(v4l2_flash, external_strobe_set, |
| 253 | external_strobe); |
| 254 | case V4L2_CID_FLASH_STROBE: |
| 255 | if (__software_strobe_mode_inactive(ctrls)) |
| 256 | return -EBUSY; |
| 257 | return led_set_flash_strobe(fled_cdev, true); |
| 258 | case V4L2_CID_FLASH_STROBE_STOP: |
| 259 | if (__software_strobe_mode_inactive(ctrls)) |
| 260 | return -EBUSY; |
| 261 | return led_set_flash_strobe(fled_cdev, false); |
| 262 | case V4L2_CID_FLASH_TIMEOUT: |
| 263 | /* |
| 264 | * No conversion is needed as LED Flash class also uses |
| 265 | * microseconds for flash timeout units. |
| 266 | */ |
| 267 | return led_set_flash_timeout(fled_cdev, c->val); |
| 268 | case V4L2_CID_FLASH_INTENSITY: |
| 269 | /* |
| 270 | * No conversion is needed as LED Flash class also uses |
| 271 | * microamperes for flash intensity units. |
| 272 | */ |
| 273 | return led_set_flash_brightness(fled_cdev, c->val); |
| 274 | case V4L2_CID_FLASH_TORCH_INTENSITY: |
| 275 | case V4L2_CID_FLASH_INDICATOR_INTENSITY: |
| 276 | v4l2_flash_set_led_brightness(v4l2_flash, c); |
| 277 | return 0; |
| 278 | } |
| 279 | |
| 280 | return -EINVAL; |
| 281 | } |
| 282 | |
| 283 | static const struct v4l2_ctrl_ops v4l2_flash_ctrl_ops = { |
| 284 | .g_volatile_ctrl = v4l2_flash_g_volatile_ctrl, |
| 285 | .s_ctrl = v4l2_flash_s_ctrl, |
| 286 | }; |
| 287 | |
| 288 | static void __lfs_to_v4l2_ctrl_config(struct led_flash_setting *s, |
| 289 | struct v4l2_ctrl_config *c) |
| 290 | { |
| 291 | c->min = s->min; |
| 292 | c->max = s->max; |
| 293 | c->step = s->step; |
| 294 | c->def = s->val; |
| 295 | } |
| 296 | |
| 297 | static void __fill_ctrl_init_data(struct v4l2_flash *v4l2_flash, |
| 298 | struct v4l2_flash_config *flash_cfg, |
| 299 | struct v4l2_flash_ctrl_data *ctrl_init_data) |
| 300 | { |
| 301 | struct led_classdev_flash *fled_cdev = v4l2_flash->fled_cdev; |
| 302 | const struct led_flash_ops *fled_cdev_ops = fled_cdev->ops; |
| 303 | struct led_classdev *led_cdev = &fled_cdev->led_cdev; |
| 304 | struct v4l2_ctrl_config *ctrl_cfg; |
| 305 | u32 mask; |
| 306 | |
| 307 | /* Init FLASH_FAULT ctrl data */ |
| 308 | if (flash_cfg->flash_faults) { |
| 309 | ctrl_init_data[FLASH_FAULT].cid = V4L2_CID_FLASH_FAULT; |
| 310 | ctrl_cfg = &ctrl_init_data[FLASH_FAULT].config; |
| 311 | ctrl_cfg->id = V4L2_CID_FLASH_FAULT; |
| 312 | ctrl_cfg->max = flash_cfg->flash_faults; |
| 313 | ctrl_cfg->flags = V4L2_CTRL_FLAG_VOLATILE | |
| 314 | V4L2_CTRL_FLAG_READ_ONLY; |
| 315 | } |
| 316 | |
| 317 | /* Init FLASH_LED_MODE ctrl data */ |
| 318 | mask = 1 << V4L2_FLASH_LED_MODE_NONE | |
| 319 | 1 << V4L2_FLASH_LED_MODE_TORCH; |
| 320 | if (led_cdev->flags & LED_DEV_CAP_FLASH) |
| 321 | mask |= 1 << V4L2_FLASH_LED_MODE_FLASH; |
| 322 | |
| 323 | ctrl_init_data[LED_MODE].cid = V4L2_CID_FLASH_LED_MODE; |
| 324 | ctrl_cfg = &ctrl_init_data[LED_MODE].config; |
| 325 | ctrl_cfg->id = V4L2_CID_FLASH_LED_MODE; |
| 326 | ctrl_cfg->max = V4L2_FLASH_LED_MODE_TORCH; |
| 327 | ctrl_cfg->menu_skip_mask = ~mask; |
| 328 | ctrl_cfg->def = V4L2_FLASH_LED_MODE_NONE; |
| 329 | ctrl_cfg->flags = 0; |
| 330 | |
| 331 | /* Init TORCH_INTENSITY ctrl data */ |
| 332 | ctrl_init_data[TORCH_INTENSITY].cid = V4L2_CID_FLASH_TORCH_INTENSITY; |
| 333 | ctrl_cfg = &ctrl_init_data[TORCH_INTENSITY].config; |
| 334 | __lfs_to_v4l2_ctrl_config(&flash_cfg->torch_intensity, ctrl_cfg); |
| 335 | ctrl_cfg->id = V4L2_CID_FLASH_TORCH_INTENSITY; |
| 336 | ctrl_cfg->flags = V4L2_CTRL_FLAG_VOLATILE | |
| 337 | V4L2_CTRL_FLAG_EXECUTE_ON_WRITE; |
| 338 | |
| 339 | /* Init INDICATOR_INTENSITY ctrl data */ |
| 340 | if (v4l2_flash->iled_cdev) { |
| 341 | ctrl_init_data[INDICATOR_INTENSITY].cid = |
| 342 | V4L2_CID_FLASH_INDICATOR_INTENSITY; |
| 343 | ctrl_cfg = &ctrl_init_data[INDICATOR_INTENSITY].config; |
| 344 | __lfs_to_v4l2_ctrl_config(&flash_cfg->indicator_intensity, |
| 345 | ctrl_cfg); |
| 346 | ctrl_cfg->id = V4L2_CID_FLASH_INDICATOR_INTENSITY; |
| 347 | ctrl_cfg->min = 0; |
| 348 | ctrl_cfg->flags = V4L2_CTRL_FLAG_VOLATILE | |
| 349 | V4L2_CTRL_FLAG_EXECUTE_ON_WRITE; |
| 350 | } |
| 351 | |
| 352 | if (!(led_cdev->flags & LED_DEV_CAP_FLASH)) |
| 353 | return; |
| 354 | |
| 355 | /* Init FLASH_STROBE ctrl data */ |
| 356 | ctrl_init_data[FLASH_STROBE].cid = V4L2_CID_FLASH_STROBE; |
| 357 | ctrl_cfg = &ctrl_init_data[FLASH_STROBE].config; |
| 358 | ctrl_cfg->id = V4L2_CID_FLASH_STROBE; |
| 359 | |
| 360 | /* Init STROBE_STOP ctrl data */ |
| 361 | ctrl_init_data[STROBE_STOP].cid = V4L2_CID_FLASH_STROBE_STOP; |
| 362 | ctrl_cfg = &ctrl_init_data[STROBE_STOP].config; |
| 363 | ctrl_cfg->id = V4L2_CID_FLASH_STROBE_STOP; |
| 364 | |
| 365 | /* Init FLASH_STROBE_SOURCE ctrl data */ |
| 366 | if (flash_cfg->has_external_strobe) { |
| 367 | mask = (1 << V4L2_FLASH_STROBE_SOURCE_SOFTWARE) | |
| 368 | (1 << V4L2_FLASH_STROBE_SOURCE_EXTERNAL); |
| 369 | ctrl_init_data[STROBE_SOURCE].cid = |
| 370 | V4L2_CID_FLASH_STROBE_SOURCE; |
| 371 | ctrl_cfg = &ctrl_init_data[STROBE_SOURCE].config; |
| 372 | ctrl_cfg->id = V4L2_CID_FLASH_STROBE_SOURCE; |
| 373 | ctrl_cfg->max = V4L2_FLASH_STROBE_SOURCE_EXTERNAL; |
| 374 | ctrl_cfg->menu_skip_mask = ~mask; |
| 375 | ctrl_cfg->def = V4L2_FLASH_STROBE_SOURCE_SOFTWARE; |
| 376 | } |
| 377 | |
| 378 | /* Init STROBE_STATUS ctrl data */ |
| 379 | if (fled_cdev_ops->strobe_get) { |
| 380 | ctrl_init_data[STROBE_STATUS].cid = |
| 381 | V4L2_CID_FLASH_STROBE_STATUS; |
| 382 | ctrl_cfg = &ctrl_init_data[STROBE_STATUS].config; |
| 383 | ctrl_cfg->id = V4L2_CID_FLASH_STROBE_STATUS; |
| 384 | ctrl_cfg->flags = V4L2_CTRL_FLAG_VOLATILE | |
| 385 | V4L2_CTRL_FLAG_READ_ONLY; |
| 386 | } |
| 387 | |
| 388 | /* Init FLASH_TIMEOUT ctrl data */ |
| 389 | if (fled_cdev_ops->timeout_set) { |
| 390 | ctrl_init_data[FLASH_TIMEOUT].cid = V4L2_CID_FLASH_TIMEOUT; |
| 391 | ctrl_cfg = &ctrl_init_data[FLASH_TIMEOUT].config; |
| 392 | __lfs_to_v4l2_ctrl_config(&fled_cdev->timeout, ctrl_cfg); |
| 393 | ctrl_cfg->id = V4L2_CID_FLASH_TIMEOUT; |
| 394 | } |
| 395 | |
| 396 | /* Init FLASH_INTENSITY ctrl data */ |
| 397 | if (fled_cdev_ops->flash_brightness_set) { |
| 398 | ctrl_init_data[FLASH_INTENSITY].cid = V4L2_CID_FLASH_INTENSITY; |
| 399 | ctrl_cfg = &ctrl_init_data[FLASH_INTENSITY].config; |
| 400 | __lfs_to_v4l2_ctrl_config(&fled_cdev->brightness, ctrl_cfg); |
| 401 | ctrl_cfg->id = V4L2_CID_FLASH_INTENSITY; |
| 402 | ctrl_cfg->flags = V4L2_CTRL_FLAG_VOLATILE | |
| 403 | V4L2_CTRL_FLAG_EXECUTE_ON_WRITE; |
| 404 | } |
| 405 | } |
| 406 | |
| 407 | static int v4l2_flash_init_controls(struct v4l2_flash *v4l2_flash, |
| 408 | struct v4l2_flash_config *flash_cfg) |
| 409 | |
| 410 | { |
| 411 | struct v4l2_flash_ctrl_data *ctrl_init_data; |
| 412 | struct v4l2_ctrl *ctrl; |
| 413 | struct v4l2_ctrl_config *ctrl_cfg; |
| 414 | int i, ret, num_ctrls = 0; |
| 415 | |
| 416 | v4l2_flash->ctrls = devm_kzalloc(v4l2_flash->sd.dev, |
| 417 | sizeof(*v4l2_flash->ctrls) * |
| 418 | (STROBE_SOURCE + 1), GFP_KERNEL); |
| 419 | if (!v4l2_flash->ctrls) |
| 420 | return -ENOMEM; |
| 421 | |
| 422 | /* allocate memory dynamically so as not to exceed stack frame size */ |
| 423 | ctrl_init_data = kcalloc(NUM_FLASH_CTRLS, sizeof(*ctrl_init_data), |
| 424 | GFP_KERNEL); |
| 425 | if (!ctrl_init_data) |
| 426 | return -ENOMEM; |
| 427 | |
| 428 | __fill_ctrl_init_data(v4l2_flash, flash_cfg, ctrl_init_data); |
| 429 | |
| 430 | for (i = 0; i < NUM_FLASH_CTRLS; ++i) |
| 431 | if (ctrl_init_data[i].cid) |
| 432 | ++num_ctrls; |
| 433 | |
| 434 | v4l2_ctrl_handler_init(&v4l2_flash->hdl, num_ctrls); |
| 435 | |
| 436 | for (i = 0; i < NUM_FLASH_CTRLS; ++i) { |
| 437 | ctrl_cfg = &ctrl_init_data[i].config; |
| 438 | if (!ctrl_init_data[i].cid) |
| 439 | continue; |
| 440 | |
| 441 | if (ctrl_cfg->id == V4L2_CID_FLASH_LED_MODE || |
| 442 | ctrl_cfg->id == V4L2_CID_FLASH_STROBE_SOURCE) |
| 443 | ctrl = v4l2_ctrl_new_std_menu(&v4l2_flash->hdl, |
| 444 | &v4l2_flash_ctrl_ops, |
| 445 | ctrl_cfg->id, |
| 446 | ctrl_cfg->max, |
| 447 | ctrl_cfg->menu_skip_mask, |
| 448 | ctrl_cfg->def); |
| 449 | else |
| 450 | ctrl = v4l2_ctrl_new_std(&v4l2_flash->hdl, |
| 451 | &v4l2_flash_ctrl_ops, |
| 452 | ctrl_cfg->id, |
| 453 | ctrl_cfg->min, |
| 454 | ctrl_cfg->max, |
| 455 | ctrl_cfg->step, |
| 456 | ctrl_cfg->def); |
| 457 | |
| 458 | if (ctrl) |
| 459 | ctrl->flags |= ctrl_cfg->flags; |
| 460 | |
| 461 | if (i <= STROBE_SOURCE) |
| 462 | v4l2_flash->ctrls[i] = ctrl; |
| 463 | } |
| 464 | |
| 465 | kfree(ctrl_init_data); |
| 466 | |
| 467 | if (v4l2_flash->hdl.error) { |
| 468 | ret = v4l2_flash->hdl.error; |
| 469 | goto error_free_handler; |
| 470 | } |
| 471 | |
| 472 | v4l2_ctrl_handler_setup(&v4l2_flash->hdl); |
| 473 | |
| 474 | v4l2_flash->sd.ctrl_handler = &v4l2_flash->hdl; |
| 475 | |
| 476 | return 0; |
| 477 | |
| 478 | error_free_handler: |
| 479 | v4l2_ctrl_handler_free(&v4l2_flash->hdl); |
| 480 | return ret; |
| 481 | } |
| 482 | |
| 483 | static int __sync_device_with_v4l2_controls(struct v4l2_flash *v4l2_flash) |
| 484 | { |
| 485 | struct led_classdev_flash *fled_cdev = v4l2_flash->fled_cdev; |
| 486 | struct v4l2_ctrl **ctrls = v4l2_flash->ctrls; |
| 487 | int ret = 0; |
| 488 | |
| 489 | v4l2_flash_set_led_brightness(v4l2_flash, ctrls[TORCH_INTENSITY]); |
| 490 | |
| 491 | if (ctrls[INDICATOR_INTENSITY]) |
| 492 | v4l2_flash_set_led_brightness(v4l2_flash, |
| 493 | ctrls[INDICATOR_INTENSITY]); |
| 494 | |
| 495 | if (ctrls[FLASH_TIMEOUT]) { |
| 496 | ret = led_set_flash_timeout(fled_cdev, |
| 497 | ctrls[FLASH_TIMEOUT]->val); |
| 498 | if (ret < 0) |
| 499 | return ret; |
| 500 | } |
| 501 | |
| 502 | if (ctrls[FLASH_INTENSITY]) { |
| 503 | ret = led_set_flash_brightness(fled_cdev, |
| 504 | ctrls[FLASH_INTENSITY]->val); |
| 505 | if (ret < 0) |
| 506 | return ret; |
| 507 | } |
| 508 | |
| 509 | /* |
| 510 | * For some hardware arrangements setting strobe source may affect |
| 511 | * torch mode. Synchronize strobe source setting only if not in torch |
| 512 | * mode. For torch mode case it will get synchronized upon switching |
| 513 | * to flash mode. |
| 514 | */ |
| 515 | if (ctrls[STROBE_SOURCE] && |
| 516 | ctrls[LED_MODE]->val != V4L2_FLASH_LED_MODE_TORCH) |
| 517 | ret = call_flash_op(v4l2_flash, external_strobe_set, |
| 518 | ctrls[STROBE_SOURCE]->val); |
| 519 | |
| 520 | return ret; |
| 521 | } |
| 522 | |
| 523 | /* |
| 524 | * V4L2 subdev internal operations |
| 525 | */ |
| 526 | |
| 527 | static int v4l2_flash_open(struct v4l2_subdev *sd, struct v4l2_subdev_fh *fh) |
| 528 | { |
| 529 | struct v4l2_flash *v4l2_flash = v4l2_subdev_to_v4l2_flash(sd); |
| 530 | struct led_classdev_flash *fled_cdev = v4l2_flash->fled_cdev; |
| 531 | struct led_classdev *led_cdev = &fled_cdev->led_cdev; |
| 532 | struct led_classdev_flash *iled_cdev = v4l2_flash->iled_cdev; |
| 533 | struct led_classdev *led_cdev_ind = NULL; |
| 534 | int ret = 0; |
| 535 | |
| 536 | if (!v4l2_fh_is_singular(&fh->vfh)) |
| 537 | return 0; |
| 538 | |
| 539 | mutex_lock(&led_cdev->led_access); |
| 540 | |
| 541 | led_sysfs_disable(led_cdev); |
| 542 | led_trigger_remove(led_cdev); |
| 543 | |
| 544 | mutex_unlock(&led_cdev->led_access); |
| 545 | |
| 546 | if (iled_cdev) { |
| 547 | led_cdev_ind = &iled_cdev->led_cdev; |
| 548 | |
| 549 | mutex_lock(&led_cdev_ind->led_access); |
| 550 | |
| 551 | led_sysfs_disable(led_cdev_ind); |
| 552 | led_trigger_remove(led_cdev_ind); |
| 553 | |
| 554 | mutex_unlock(&led_cdev_ind->led_access); |
| 555 | } |
| 556 | |
| 557 | ret = __sync_device_with_v4l2_controls(v4l2_flash); |
| 558 | if (ret < 0) |
| 559 | goto out_sync_device; |
| 560 | |
| 561 | return 0; |
| 562 | out_sync_device: |
| 563 | mutex_lock(&led_cdev->led_access); |
| 564 | led_sysfs_enable(led_cdev); |
| 565 | mutex_unlock(&led_cdev->led_access); |
| 566 | |
| 567 | if (led_cdev_ind) { |
| 568 | mutex_lock(&led_cdev_ind->led_access); |
| 569 | led_sysfs_enable(led_cdev_ind); |
| 570 | mutex_unlock(&led_cdev_ind->led_access); |
| 571 | } |
| 572 | |
| 573 | return ret; |
| 574 | } |
| 575 | |
| 576 | static int v4l2_flash_close(struct v4l2_subdev *sd, struct v4l2_subdev_fh *fh) |
| 577 | { |
| 578 | struct v4l2_flash *v4l2_flash = v4l2_subdev_to_v4l2_flash(sd); |
| 579 | struct led_classdev_flash *fled_cdev = v4l2_flash->fled_cdev; |
| 580 | struct led_classdev *led_cdev = &fled_cdev->led_cdev; |
| 581 | struct led_classdev_flash *iled_cdev = v4l2_flash->iled_cdev; |
| 582 | int ret = 0; |
| 583 | |
| 584 | if (!v4l2_fh_is_singular(&fh->vfh)) |
| 585 | return 0; |
| 586 | |
| 587 | mutex_lock(&led_cdev->led_access); |
| 588 | |
| 589 | if (v4l2_flash->ctrls[STROBE_SOURCE]) |
| 590 | ret = v4l2_ctrl_s_ctrl(v4l2_flash->ctrls[STROBE_SOURCE], |
| 591 | V4L2_FLASH_STROBE_SOURCE_SOFTWARE); |
| 592 | led_sysfs_enable(led_cdev); |
| 593 | |
| 594 | mutex_unlock(&led_cdev->led_access); |
| 595 | |
| 596 | if (iled_cdev) { |
| 597 | struct led_classdev *led_cdev_ind = &iled_cdev->led_cdev; |
| 598 | |
| 599 | mutex_lock(&led_cdev_ind->led_access); |
| 600 | led_sysfs_enable(led_cdev_ind); |
| 601 | mutex_unlock(&led_cdev_ind->led_access); |
| 602 | } |
| 603 | |
| 604 | return ret; |
| 605 | } |
| 606 | |
| 607 | static const struct v4l2_subdev_internal_ops v4l2_flash_subdev_internal_ops = { |
| 608 | .open = v4l2_flash_open, |
| 609 | .close = v4l2_flash_close, |
| 610 | }; |
| 611 | |
Hans Verkuil | 7853c23 | 2016-07-03 09:20:46 -0300 | [diff] [blame^] | 612 | static const struct v4l2_subdev_ops v4l2_flash_subdev_ops; |
Jacek Anaszewski | 42bd6f5 | 2015-06-19 00:31:47 -0700 | [diff] [blame] | 613 | |
| 614 | struct v4l2_flash *v4l2_flash_init( |
| 615 | struct device *dev, struct device_node *of_node, |
| 616 | struct led_classdev_flash *fled_cdev, |
| 617 | struct led_classdev_flash *iled_cdev, |
| 618 | const struct v4l2_flash_ops *ops, |
| 619 | struct v4l2_flash_config *config) |
| 620 | { |
| 621 | struct v4l2_flash *v4l2_flash; |
| 622 | struct led_classdev *led_cdev; |
| 623 | struct v4l2_subdev *sd; |
| 624 | int ret; |
| 625 | |
| 626 | if (!fled_cdev || !ops || !config) |
| 627 | return ERR_PTR(-EINVAL); |
| 628 | |
| 629 | led_cdev = &fled_cdev->led_cdev; |
| 630 | |
| 631 | v4l2_flash = devm_kzalloc(led_cdev->dev, sizeof(*v4l2_flash), |
| 632 | GFP_KERNEL); |
| 633 | if (!v4l2_flash) |
| 634 | return ERR_PTR(-ENOMEM); |
| 635 | |
| 636 | sd = &v4l2_flash->sd; |
| 637 | v4l2_flash->fled_cdev = fled_cdev; |
| 638 | v4l2_flash->iled_cdev = iled_cdev; |
| 639 | v4l2_flash->ops = ops; |
| 640 | sd->dev = dev; |
| 641 | sd->of_node = of_node; |
| 642 | v4l2_subdev_init(sd, &v4l2_flash_subdev_ops); |
| 643 | sd->internal_ops = &v4l2_flash_subdev_internal_ops; |
| 644 | sd->flags |= V4L2_SUBDEV_FL_HAS_DEVNODE; |
| 645 | strlcpy(sd->name, config->dev_name, sizeof(sd->name)); |
| 646 | |
Mauro Carvalho Chehab | ab22e77 | 2015-12-11 07:44:40 -0200 | [diff] [blame] | 647 | ret = media_entity_pads_init(&sd->entity, 0, NULL); |
Jacek Anaszewski | 42bd6f5 | 2015-06-19 00:31:47 -0700 | [diff] [blame] | 648 | if (ret < 0) |
| 649 | return ERR_PTR(ret); |
| 650 | |
Mauro Carvalho Chehab | 4ca72ef | 2015-12-10 17:25:41 -0200 | [diff] [blame] | 651 | sd->entity.function = MEDIA_ENT_F_FLASH; |
Jacek Anaszewski | 42bd6f5 | 2015-06-19 00:31:47 -0700 | [diff] [blame] | 652 | |
| 653 | ret = v4l2_flash_init_controls(v4l2_flash, config); |
| 654 | if (ret < 0) |
| 655 | goto err_init_controls; |
| 656 | |
| 657 | if (sd->of_node) |
| 658 | of_node_get(sd->of_node); |
| 659 | else |
| 660 | of_node_get(led_cdev->dev->of_node); |
| 661 | |
| 662 | ret = v4l2_async_register_subdev(sd); |
| 663 | if (ret < 0) |
| 664 | goto err_async_register_sd; |
| 665 | |
| 666 | return v4l2_flash; |
| 667 | |
| 668 | err_async_register_sd: |
| 669 | of_node_put(led_cdev->dev->of_node); |
| 670 | v4l2_ctrl_handler_free(sd->ctrl_handler); |
| 671 | err_init_controls: |
| 672 | media_entity_cleanup(&sd->entity); |
| 673 | |
| 674 | return ERR_PTR(ret); |
| 675 | } |
| 676 | EXPORT_SYMBOL_GPL(v4l2_flash_init); |
| 677 | |
| 678 | void v4l2_flash_release(struct v4l2_flash *v4l2_flash) |
| 679 | { |
| 680 | struct v4l2_subdev *sd; |
| 681 | struct led_classdev *led_cdev; |
| 682 | |
| 683 | if (IS_ERR_OR_NULL(v4l2_flash)) |
| 684 | return; |
| 685 | |
| 686 | sd = &v4l2_flash->sd; |
| 687 | led_cdev = &v4l2_flash->fled_cdev->led_cdev; |
| 688 | |
| 689 | v4l2_async_unregister_subdev(sd); |
| 690 | |
| 691 | if (sd->of_node) |
| 692 | of_node_put(sd->of_node); |
| 693 | else |
| 694 | of_node_put(led_cdev->dev->of_node); |
| 695 | |
| 696 | v4l2_ctrl_handler_free(sd->ctrl_handler); |
| 697 | media_entity_cleanup(&sd->entity); |
| 698 | } |
| 699 | EXPORT_SYMBOL_GPL(v4l2_flash_release); |
| 700 | |
| 701 | MODULE_AUTHOR("Jacek Anaszewski <j.anaszewski@samsung.com>"); |
| 702 | MODULE_DESCRIPTION("V4L2 Flash sub-device helpers"); |
| 703 | MODULE_LICENSE("GPL v2"); |