arch/arm/boot/dts/at91sam9x5.dtsi

/*
 * at91sam9x5.dtsi - Device Tree Include file for AT91SAM9x5 family SoC
 *                   applies to AT91SAM9G15, AT91SAM9G25, AT91SAM9G35,
 *                   AT91SAM9X25, AT91SAM9X35 SoC
 *
 *  Copyright (C) 2012 Atmel,
 *                2012 Nicolas Ferre <nicolas.ferre@atmel.com>
 *
 * Licensed under GPLv2 or later.
 */

/include/ "skeleton.dtsi"

/ {
	model = "Atmel AT91SAM9x5 family SoC";
	compatible = "atmel,at91sam9x5";
	interrupt-parent = <&aic>;

	aliases {
		serial0 = &dbgu;
		serial1 = &usart0;
		serial2 = &usart1;
		serial3 = &usart2;
		gpio0 = &pioA;
		gpio1 = &pioB;
		gpio2 = &pioC;
		gpio3 = &pioD;
		tcb0 = &tcb0;
		tcb1 = &tcb1;
	};
	cpus {
		cpu@0 {
			compatible = "arm,arm926ejs";
		};
	};

	memory@20000000 {
		reg = <0x20000000 0x10000000>;
	};

	ahb {
		compatible = "simple-bus";
		#address-cells = <1>;
		#size-cells = <1>;
		ranges;

		apb {
			compatible = "simple-bus";
			#address-cells = <1>;
			#size-cells = <1>;
			ranges;

			aic: interrupt-controller@fffff000 {
				#interrupt-cells = <2>;
				compatible = "atmel,at91rm9200-aic";
				interrupt-controller;
				interrupt-parent;
				reg = <0xfffff000 0x200>;
			};

			ramc0: ramc@ffffe800 {
				compatible = "atmel,at91sam9g45-ddramc";
				reg = <0xffffe800 0x200>;
			};

			pmc: pmc@fffffc00 {
				compatible = "atmel,at91rm9200-pmc";
				reg = <0xfffffc00 0x100>;
			};

			rstc@fffffe00 {
				compatible = "atmel,at91sam9g45-rstc";
				reg = <0xfffffe00 0x10>;
			};

			shdwc@fffffe10 {
				compatible = "atmel,at91sam9x5-shdwc";
				reg = <0xfffffe10 0x10>;
			};

			pit: timer@fffffe30 {
				compatible = "atmel,at91sam9260-pit";
				reg = <0xfffffe30 0xf>;
				interrupts = <1 4>;
			};

			tcb0: timer@f8008000 {
				compatible = "atmel,at91sam9x5-tcb";
				reg = <0xf8008000 0x100>;
				interrupts = <17 4>;
			};

			tcb1: timer@f800c000 {
				compatible = "atmel,at91sam9x5-tcb";
				reg = <0xf800c000 0x100>;
				interrupts = <17 4>;
			};

			dma0: dma-controller@ffffec00 {
				compatible = "atmel,at91sam9g45-dma";
				reg = <0xffffec00 0x200>;
				interrupts = <20 4>;
			};

			dma1: dma-controller@ffffee00 {
				compatible = "atmel,at91sam9g45-dma";
				reg = <0xffffee00 0x200>;
				interrupts = <21 4>;
			};

			pioA: gpio@fffff400 {
				compatible = "atmel,at91sam9x5-gpio", "atmel,at91rm9200-gpio";
				reg = <0xfffff400 0x100>;
				interrupts = <2 4>;
				#gpio-cells = <2>;
				gpio-controller;
				interrupt-controller;
			};

			pioB: gpio@fffff600 {
				compatible = "atmel,at91sam9x5-gpio", "atmel,at91rm9200-gpio";
				reg = <0xfffff600 0x100>;
				interrupts = <2 4>;
				#gpio-cells = <2>;
				gpio-controller;
				interrupt-controller;
			};

			pioC: gpio@fffff800 {
				compatible = "atmel,at91sam9x5-gpio", "atmel,at91rm9200-gpio";
				reg = <0xfffff800 0x100>;
				interrupts = <3 4>;
				#gpio-cells = <2>;
				gpio-controller;
				interrupt-controller;
			};

			pioD: gpio@fffffa00 {
				compatible = "atmel,at91sam9x5-gpio", "atmel,at91rm9200-gpio";
				reg = <0xfffffa00 0x100>;
				interrupts = <3 4>;
				#gpio-cells = <2>;
				gpio-controller;
				interrupt-controller;
			};

			dbgu: serial@fffff200 {
				compatible = "atmel,at91sam9260-usart";
				reg = <0xfffff200 0x200>;
				interrupts = <1 4>;
				status = "disabled";
			};

			usart0: serial@f801c000 {
				compatible = "atmel,at91sam9260-usart";
				reg = <0xf801c000 0x200>;
				interrupts = <5 4>;
				atmel,use-dma-rx;
				atmel,use-dma-tx;
				status = "disabled";
			};

			usart1: serial@f8020000 {
				compatible = "atmel,at91sam9260-usart";
				reg = <0xf8020000 0x200>;
				interrupts = <6 4>;
				atmel,use-dma-rx;
				atmel,use-dma-tx;
				status = "disabled";
			};

			usart2: serial@f8024000 {
				compatible = "atmel,at91sam9260-usart";
				reg = <0xf8024000 0x200>;
				interrupts = <7 4>;
				atmel,use-dma-rx;
				atmel,use-dma-tx;
				status = "disabled";
			};

			macb0: ethernet@f802c000 {
				compatible = "cdns,at32ap7000-macb", "cdns,macb";
				reg = <0xf802c000 0x100>;
				interrupts = <24 4>;
				status = "disabled";
			};

			macb1: ethernet@f8030000 {
				compatible = "cdns,at32ap7000-macb", "cdns,macb";
				reg = <0xf8030000 0x100>;
				interrupts = <27 4>;
				status = "disabled";
			};
		};

		nand0: nand@40000000 {
			compatible = "atmel,at91rm9200-nand";
			#address-cells = <1>;
			#size-cells = <1>;
			reg = <0x40000000 0x10000000
			      >;
			atmel,nand-addr-offset = <21>;
			atmel,nand-cmd-offset = <22>;
			gpios = <&pioC 8 0
				 &pioC 14 0
				 0
				>;
			status = "disabled";
		};
	};

	i2c@0 {
		compatible = "i2c-gpio";
		gpios = <&pioA 30 0 /* sda */
			 &pioA 31 0 /* scl */
			>;
		i2c-gpio,sda-open-drain;
		i2c-gpio,scl-open-drain;
		i2c-gpio,delay-us = <2>;	/* ~100 kHz */
		#address-cells = <1>;
		#size-cells = <0>;
		status = "disabled";
	};

	i2c@1 {
		compatible = "i2c-gpio";
		gpios = <&pioC 0 0 /* sda */
			 &pioC 1 0 /* scl */
			>;
		i2c-gpio,sda-open-drain;
		i2c-gpio,scl-open-drain;
		i2c-gpio,delay-us = <2>;	/* ~100 kHz */
		#address-cells = <1>;
		#size-cells = <0>;
		status = "disabled";
	};

	i2c@2 {
		compatible = "i2c-gpio";
		gpios = <&pioB 4 0 /* sda */
			 &pioB 5 0 /* scl */
			>;
		i2c-gpio,sda-open-drain;
		i2c-gpio,scl-open-drain;
		i2c-gpio,delay-us = <2>;	/* ~100 kHz */
		#address-cells = <1>;
		#size-cells = <0>;
		status = "disabled";
	};
};