Daniel Jeong | 28e64a6 | 2013-11-12 15:08:58 -0800 | [diff] [blame] | 1 | /* |
| 2 | * Simple driver for Texas Instruments LM3630A Backlight driver chip |
| 3 | * Copyright (C) 2012 Texas Instruments |
| 4 | * |
| 5 | * This program is free software; you can redistribute it and/or modify |
| 6 | * it under the terms of the GNU General Public License version 2 as |
| 7 | * published by the Free Software Foundation. |
| 8 | * |
| 9 | */ |
| 10 | #include <linux/module.h> |
| 11 | #include <linux/slab.h> |
| 12 | #include <linux/i2c.h> |
| 13 | #include <linux/backlight.h> |
| 14 | #include <linux/err.h> |
| 15 | #include <linux/delay.h> |
| 16 | #include <linux/uaccess.h> |
| 17 | #include <linux/interrupt.h> |
| 18 | #include <linux/regmap.h> |
| 19 | #include <linux/pwm.h> |
| 20 | #include <linux/platform_data/lm3630a_bl.h> |
| 21 | |
| 22 | #define REG_CTRL 0x00 |
| 23 | #define REG_BOOST 0x02 |
| 24 | #define REG_CONFIG 0x01 |
| 25 | #define REG_BRT_A 0x03 |
| 26 | #define REG_BRT_B 0x04 |
| 27 | #define REG_I_A 0x05 |
| 28 | #define REG_I_B 0x06 |
| 29 | #define REG_INT_STATUS 0x09 |
| 30 | #define REG_INT_EN 0x0A |
| 31 | #define REG_FAULT 0x0B |
| 32 | #define REG_PWM_OUTLOW 0x12 |
| 33 | #define REG_PWM_OUTHIGH 0x13 |
| 34 | #define REG_MAX 0x1F |
| 35 | |
| 36 | #define INT_DEBOUNCE_MSEC 10 |
| 37 | struct lm3630a_chip { |
| 38 | struct device *dev; |
| 39 | struct delayed_work work; |
| 40 | |
| 41 | int irq; |
| 42 | struct workqueue_struct *irqthread; |
| 43 | struct lm3630a_platform_data *pdata; |
| 44 | struct backlight_device *bleda; |
| 45 | struct backlight_device *bledb; |
| 46 | struct regmap *regmap; |
| 47 | struct pwm_device *pwmd; |
| 48 | }; |
| 49 | |
| 50 | /* i2c access */ |
| 51 | static int lm3630a_read(struct lm3630a_chip *pchip, unsigned int reg) |
| 52 | { |
| 53 | int rval; |
| 54 | unsigned int reg_val; |
| 55 | |
| 56 | rval = regmap_read(pchip->regmap, reg, ®_val); |
| 57 | if (rval < 0) |
| 58 | return rval; |
| 59 | return reg_val & 0xFF; |
| 60 | } |
| 61 | |
| 62 | static int lm3630a_write(struct lm3630a_chip *pchip, |
| 63 | unsigned int reg, unsigned int data) |
| 64 | { |
| 65 | return regmap_write(pchip->regmap, reg, data); |
| 66 | } |
| 67 | |
| 68 | static int lm3630a_update(struct lm3630a_chip *pchip, |
| 69 | unsigned int reg, unsigned int mask, |
| 70 | unsigned int data) |
| 71 | { |
| 72 | return regmap_update_bits(pchip->regmap, reg, mask, data); |
| 73 | } |
| 74 | |
| 75 | /* initialize chip */ |
| 76 | static int lm3630a_chip_init(struct lm3630a_chip *pchip) |
| 77 | { |
| 78 | int rval; |
| 79 | struct lm3630a_platform_data *pdata = pchip->pdata; |
| 80 | |
| 81 | usleep_range(1000, 2000); |
| 82 | /* set Filter Strength Register */ |
| 83 | rval = lm3630a_write(pchip, 0x50, 0x03); |
| 84 | /* set Cofig. register */ |
| 85 | rval |= lm3630a_update(pchip, REG_CONFIG, 0x07, pdata->pwm_ctrl); |
| 86 | /* set boost control */ |
| 87 | rval |= lm3630a_write(pchip, REG_BOOST, 0x38); |
| 88 | /* set current A */ |
| 89 | rval |= lm3630a_update(pchip, REG_I_A, 0x1F, 0x1F); |
| 90 | /* set current B */ |
| 91 | rval |= lm3630a_write(pchip, REG_I_B, 0x1F); |
| 92 | /* set control */ |
Daniel Jeong | 4c4d2a3 | 2013-11-12 15:09:01 -0800 | [diff] [blame] | 93 | rval |= lm3630a_update(pchip, REG_CTRL, 0x14, pdata->leda_ctrl); |
| 94 | rval |= lm3630a_update(pchip, REG_CTRL, 0x0B, pdata->ledb_ctrl); |
Daniel Jeong | 28e64a6 | 2013-11-12 15:08:58 -0800 | [diff] [blame] | 95 | usleep_range(1000, 2000); |
| 96 | /* set brightness A and B */ |
| 97 | rval |= lm3630a_write(pchip, REG_BRT_A, pdata->leda_init_brt); |
| 98 | rval |= lm3630a_write(pchip, REG_BRT_B, pdata->ledb_init_brt); |
| 99 | |
| 100 | if (rval < 0) |
| 101 | dev_err(pchip->dev, "i2c failed to access register\n"); |
| 102 | return rval; |
| 103 | } |
| 104 | |
| 105 | /* interrupt handling */ |
| 106 | static void lm3630a_delayed_func(struct work_struct *work) |
| 107 | { |
Dan Carpenter | 2a0c316 | 2013-11-12 15:08:59 -0800 | [diff] [blame] | 108 | int rval; |
Daniel Jeong | 28e64a6 | 2013-11-12 15:08:58 -0800 | [diff] [blame] | 109 | struct lm3630a_chip *pchip; |
| 110 | |
| 111 | pchip = container_of(work, struct lm3630a_chip, work.work); |
| 112 | |
| 113 | rval = lm3630a_read(pchip, REG_INT_STATUS); |
| 114 | if (rval < 0) { |
| 115 | dev_err(pchip->dev, |
| 116 | "i2c failed to access REG_INT_STATUS Register\n"); |
| 117 | return; |
| 118 | } |
| 119 | |
| 120 | dev_info(pchip->dev, "REG_INT_STATUS Register is 0x%x\n", rval); |
| 121 | } |
| 122 | |
| 123 | static irqreturn_t lm3630a_isr_func(int irq, void *chip) |
| 124 | { |
| 125 | int rval; |
| 126 | struct lm3630a_chip *pchip = chip; |
| 127 | unsigned long delay = msecs_to_jiffies(INT_DEBOUNCE_MSEC); |
| 128 | |
| 129 | queue_delayed_work(pchip->irqthread, &pchip->work, delay); |
| 130 | |
| 131 | rval = lm3630a_update(pchip, REG_CTRL, 0x80, 0x00); |
| 132 | if (rval < 0) { |
| 133 | dev_err(pchip->dev, "i2c failed to access register\n"); |
| 134 | return IRQ_NONE; |
| 135 | } |
| 136 | return IRQ_HANDLED; |
| 137 | } |
| 138 | |
| 139 | static int lm3630a_intr_config(struct lm3630a_chip *pchip) |
| 140 | { |
| 141 | int rval; |
| 142 | |
| 143 | rval = lm3630a_write(pchip, REG_INT_EN, 0x87); |
| 144 | if (rval < 0) |
| 145 | return rval; |
| 146 | |
| 147 | INIT_DELAYED_WORK(&pchip->work, lm3630a_delayed_func); |
| 148 | pchip->irqthread = create_singlethread_workqueue("lm3630a-irqthd"); |
| 149 | if (!pchip->irqthread) { |
| 150 | dev_err(pchip->dev, "create irq thread fail\n"); |
| 151 | return -ENOMEM; |
| 152 | } |
| 153 | if (request_threaded_irq |
| 154 | (pchip->irq, NULL, lm3630a_isr_func, |
| 155 | IRQF_TRIGGER_FALLING | IRQF_ONESHOT, "lm3630a_irq", pchip)) { |
| 156 | dev_err(pchip->dev, "request threaded irq fail\n"); |
Wei Yongjun | bcd5b41 | 2013-11-12 15:09:37 -0800 | [diff] [blame] | 157 | destroy_workqueue(pchip->irqthread); |
Daniel Jeong | 28e64a6 | 2013-11-12 15:08:58 -0800 | [diff] [blame] | 158 | return -ENOMEM; |
| 159 | } |
| 160 | return rval; |
| 161 | } |
| 162 | |
| 163 | static void lm3630a_pwm_ctrl(struct lm3630a_chip *pchip, int br, int br_max) |
| 164 | { |
| 165 | unsigned int period = pwm_get_period(pchip->pwmd); |
| 166 | unsigned int duty = br * period / br_max; |
| 167 | |
| 168 | pwm_config(pchip->pwmd, duty, period); |
| 169 | if (duty) |
| 170 | pwm_enable(pchip->pwmd); |
| 171 | else |
| 172 | pwm_disable(pchip->pwmd); |
| 173 | } |
| 174 | |
| 175 | /* update and get brightness */ |
| 176 | static int lm3630a_bank_a_update_status(struct backlight_device *bl) |
| 177 | { |
| 178 | int ret; |
| 179 | struct lm3630a_chip *pchip = bl_get_data(bl); |
| 180 | enum lm3630a_pwm_ctrl pwm_ctrl = pchip->pdata->pwm_ctrl; |
| 181 | |
| 182 | /* pwm control */ |
| 183 | if ((pwm_ctrl & LM3630A_PWM_BANK_A) != 0) { |
| 184 | lm3630a_pwm_ctrl(pchip, bl->props.brightness, |
| 185 | bl->props.max_brightness); |
| 186 | return bl->props.brightness; |
| 187 | } |
| 188 | |
| 189 | /* disable sleep */ |
| 190 | ret = lm3630a_update(pchip, REG_CTRL, 0x80, 0x00); |
| 191 | if (ret < 0) |
| 192 | goto out_i2c_err; |
| 193 | usleep_range(1000, 2000); |
| 194 | /* minimum brightness is 0x04 */ |
| 195 | ret = lm3630a_write(pchip, REG_BRT_A, bl->props.brightness); |
| 196 | if (bl->props.brightness < 0x4) |
| 197 | ret |= lm3630a_update(pchip, REG_CTRL, LM3630A_LEDA_ENABLE, 0); |
| 198 | else |
| 199 | ret |= lm3630a_update(pchip, REG_CTRL, |
| 200 | LM3630A_LEDA_ENABLE, LM3630A_LEDA_ENABLE); |
| 201 | if (ret < 0) |
| 202 | goto out_i2c_err; |
| 203 | return bl->props.brightness; |
| 204 | |
| 205 | out_i2c_err: |
| 206 | dev_err(pchip->dev, "i2c failed to access\n"); |
| 207 | return bl->props.brightness; |
| 208 | } |
| 209 | |
| 210 | static int lm3630a_bank_a_get_brightness(struct backlight_device *bl) |
| 211 | { |
| 212 | int brightness, rval; |
| 213 | struct lm3630a_chip *pchip = bl_get_data(bl); |
| 214 | enum lm3630a_pwm_ctrl pwm_ctrl = pchip->pdata->pwm_ctrl; |
| 215 | |
| 216 | if ((pwm_ctrl & LM3630A_PWM_BANK_A) != 0) { |
| 217 | rval = lm3630a_read(pchip, REG_PWM_OUTHIGH); |
| 218 | if (rval < 0) |
| 219 | goto out_i2c_err; |
| 220 | brightness = (rval & 0x01) << 8; |
| 221 | rval = lm3630a_read(pchip, REG_PWM_OUTLOW); |
| 222 | if (rval < 0) |
| 223 | goto out_i2c_err; |
| 224 | brightness |= rval; |
| 225 | goto out; |
| 226 | } |
| 227 | |
| 228 | /* disable sleep */ |
| 229 | rval = lm3630a_update(pchip, REG_CTRL, 0x80, 0x00); |
| 230 | if (rval < 0) |
| 231 | goto out_i2c_err; |
| 232 | usleep_range(1000, 2000); |
| 233 | rval = lm3630a_read(pchip, REG_BRT_A); |
| 234 | if (rval < 0) |
| 235 | goto out_i2c_err; |
| 236 | brightness = rval; |
| 237 | |
| 238 | out: |
| 239 | bl->props.brightness = brightness; |
| 240 | return bl->props.brightness; |
| 241 | out_i2c_err: |
| 242 | dev_err(pchip->dev, "i2c failed to access register\n"); |
| 243 | return 0; |
| 244 | } |
| 245 | |
| 246 | static const struct backlight_ops lm3630a_bank_a_ops = { |
| 247 | .options = BL_CORE_SUSPENDRESUME, |
| 248 | .update_status = lm3630a_bank_a_update_status, |
| 249 | .get_brightness = lm3630a_bank_a_get_brightness, |
| 250 | }; |
| 251 | |
| 252 | /* update and get brightness */ |
| 253 | static int lm3630a_bank_b_update_status(struct backlight_device *bl) |
| 254 | { |
| 255 | int ret; |
| 256 | struct lm3630a_chip *pchip = bl_get_data(bl); |
| 257 | enum lm3630a_pwm_ctrl pwm_ctrl = pchip->pdata->pwm_ctrl; |
| 258 | |
| 259 | /* pwm control */ |
| 260 | if ((pwm_ctrl & LM3630A_PWM_BANK_B) != 0) { |
| 261 | lm3630a_pwm_ctrl(pchip, bl->props.brightness, |
| 262 | bl->props.max_brightness); |
| 263 | return bl->props.brightness; |
| 264 | } |
| 265 | |
| 266 | /* disable sleep */ |
| 267 | ret = lm3630a_update(pchip, REG_CTRL, 0x80, 0x00); |
| 268 | if (ret < 0) |
| 269 | goto out_i2c_err; |
| 270 | usleep_range(1000, 2000); |
| 271 | /* minimum brightness is 0x04 */ |
| 272 | ret = lm3630a_write(pchip, REG_BRT_B, bl->props.brightness); |
| 273 | if (bl->props.brightness < 0x4) |
| 274 | ret |= lm3630a_update(pchip, REG_CTRL, LM3630A_LEDB_ENABLE, 0); |
| 275 | else |
| 276 | ret |= lm3630a_update(pchip, REG_CTRL, |
| 277 | LM3630A_LEDB_ENABLE, LM3630A_LEDB_ENABLE); |
| 278 | if (ret < 0) |
| 279 | goto out_i2c_err; |
| 280 | return bl->props.brightness; |
| 281 | |
| 282 | out_i2c_err: |
| 283 | dev_err(pchip->dev, "i2c failed to access REG_CTRL\n"); |
| 284 | return bl->props.brightness; |
| 285 | } |
| 286 | |
| 287 | static int lm3630a_bank_b_get_brightness(struct backlight_device *bl) |
| 288 | { |
| 289 | int brightness, rval; |
| 290 | struct lm3630a_chip *pchip = bl_get_data(bl); |
| 291 | enum lm3630a_pwm_ctrl pwm_ctrl = pchip->pdata->pwm_ctrl; |
| 292 | |
| 293 | if ((pwm_ctrl & LM3630A_PWM_BANK_B) != 0) { |
| 294 | rval = lm3630a_read(pchip, REG_PWM_OUTHIGH); |
| 295 | if (rval < 0) |
| 296 | goto out_i2c_err; |
| 297 | brightness = (rval & 0x01) << 8; |
| 298 | rval = lm3630a_read(pchip, REG_PWM_OUTLOW); |
| 299 | if (rval < 0) |
| 300 | goto out_i2c_err; |
| 301 | brightness |= rval; |
| 302 | goto out; |
| 303 | } |
| 304 | |
| 305 | /* disable sleep */ |
| 306 | rval = lm3630a_update(pchip, REG_CTRL, 0x80, 0x00); |
| 307 | if (rval < 0) |
| 308 | goto out_i2c_err; |
| 309 | usleep_range(1000, 2000); |
| 310 | rval = lm3630a_read(pchip, REG_BRT_B); |
| 311 | if (rval < 0) |
| 312 | goto out_i2c_err; |
| 313 | brightness = rval; |
| 314 | |
| 315 | out: |
| 316 | bl->props.brightness = brightness; |
| 317 | return bl->props.brightness; |
| 318 | out_i2c_err: |
| 319 | dev_err(pchip->dev, "i2c failed to access register\n"); |
| 320 | return 0; |
| 321 | } |
| 322 | |
| 323 | static const struct backlight_ops lm3630a_bank_b_ops = { |
| 324 | .options = BL_CORE_SUSPENDRESUME, |
| 325 | .update_status = lm3630a_bank_b_update_status, |
| 326 | .get_brightness = lm3630a_bank_b_get_brightness, |
| 327 | }; |
| 328 | |
| 329 | static int lm3630a_backlight_register(struct lm3630a_chip *pchip) |
| 330 | { |
| 331 | struct backlight_properties props; |
| 332 | struct lm3630a_platform_data *pdata = pchip->pdata; |
| 333 | |
| 334 | props.type = BACKLIGHT_RAW; |
| 335 | if (pdata->leda_ctrl != LM3630A_LEDA_DISABLE) { |
| 336 | props.brightness = pdata->leda_init_brt; |
| 337 | props.max_brightness = pdata->leda_max_brt; |
| 338 | pchip->bleda = |
| 339 | devm_backlight_device_register(pchip->dev, "lm3630a_leda", |
| 340 | pchip->dev, pchip, |
| 341 | &lm3630a_bank_a_ops, &props); |
| 342 | if (IS_ERR(pchip->bleda)) |
| 343 | return PTR_ERR(pchip->bleda); |
| 344 | } |
| 345 | |
| 346 | if ((pdata->ledb_ctrl != LM3630A_LEDB_DISABLE) && |
| 347 | (pdata->ledb_ctrl != LM3630A_LEDB_ON_A)) { |
| 348 | props.brightness = pdata->ledb_init_brt; |
| 349 | props.max_brightness = pdata->ledb_max_brt; |
| 350 | pchip->bledb = |
| 351 | devm_backlight_device_register(pchip->dev, "lm3630a_ledb", |
| 352 | pchip->dev, pchip, |
| 353 | &lm3630a_bank_b_ops, &props); |
| 354 | if (IS_ERR(pchip->bledb)) |
| 355 | return PTR_ERR(pchip->bledb); |
| 356 | } |
| 357 | return 0; |
| 358 | } |
| 359 | |
| 360 | static const struct regmap_config lm3630a_regmap = { |
| 361 | .reg_bits = 8, |
| 362 | .val_bits = 8, |
| 363 | .max_register = REG_MAX, |
| 364 | }; |
| 365 | |
| 366 | static int lm3630a_probe(struct i2c_client *client, |
| 367 | const struct i2c_device_id *id) |
| 368 | { |
Jingoo Han | c512794c | 2013-11-12 15:09:04 -0800 | [diff] [blame] | 369 | struct lm3630a_platform_data *pdata = dev_get_platdata(&client->dev); |
Daniel Jeong | 28e64a6 | 2013-11-12 15:08:58 -0800 | [diff] [blame] | 370 | struct lm3630a_chip *pchip; |
| 371 | int rval; |
| 372 | |
| 373 | if (!i2c_check_functionality(client->adapter, I2C_FUNC_I2C)) { |
| 374 | dev_err(&client->dev, "fail : i2c functionality check\n"); |
| 375 | return -EOPNOTSUPP; |
| 376 | } |
| 377 | |
| 378 | pchip = devm_kzalloc(&client->dev, sizeof(struct lm3630a_chip), |
| 379 | GFP_KERNEL); |
| 380 | if (!pchip) |
| 381 | return -ENOMEM; |
| 382 | pchip->dev = &client->dev; |
| 383 | |
| 384 | pchip->regmap = devm_regmap_init_i2c(client, &lm3630a_regmap); |
| 385 | if (IS_ERR(pchip->regmap)) { |
| 386 | rval = PTR_ERR(pchip->regmap); |
| 387 | dev_err(&client->dev, "fail : allocate reg. map: %d\n", rval); |
| 388 | return rval; |
| 389 | } |
| 390 | |
| 391 | i2c_set_clientdata(client, pchip); |
| 392 | if (pdata == NULL) { |
Dan Carpenter | e19493c | 2013-11-12 15:09:00 -0800 | [diff] [blame] | 393 | pdata = devm_kzalloc(pchip->dev, |
| 394 | sizeof(struct lm3630a_platform_data), |
| 395 | GFP_KERNEL); |
| 396 | if (pdata == NULL) |
Daniel Jeong | 28e64a6 | 2013-11-12 15:08:58 -0800 | [diff] [blame] | 397 | return -ENOMEM; |
| 398 | /* default values */ |
Dan Carpenter | e19493c | 2013-11-12 15:09:00 -0800 | [diff] [blame] | 399 | pdata->leda_ctrl = LM3630A_LEDA_ENABLE; |
| 400 | pdata->ledb_ctrl = LM3630A_LEDB_ENABLE; |
| 401 | pdata->leda_max_brt = LM3630A_MAX_BRIGHTNESS; |
| 402 | pdata->ledb_max_brt = LM3630A_MAX_BRIGHTNESS; |
| 403 | pdata->leda_init_brt = LM3630A_MAX_BRIGHTNESS; |
| 404 | pdata->ledb_init_brt = LM3630A_MAX_BRIGHTNESS; |
Daniel Jeong | 28e64a6 | 2013-11-12 15:08:58 -0800 | [diff] [blame] | 405 | } |
Dan Carpenter | e19493c | 2013-11-12 15:09:00 -0800 | [diff] [blame] | 406 | pchip->pdata = pdata; |
| 407 | |
Daniel Jeong | 28e64a6 | 2013-11-12 15:08:58 -0800 | [diff] [blame] | 408 | /* chip initialize */ |
| 409 | rval = lm3630a_chip_init(pchip); |
| 410 | if (rval < 0) { |
| 411 | dev_err(&client->dev, "fail : init chip\n"); |
| 412 | return rval; |
| 413 | } |
| 414 | /* backlight register */ |
| 415 | rval = lm3630a_backlight_register(pchip); |
| 416 | if (rval < 0) { |
| 417 | dev_err(&client->dev, "fail : backlight register.\n"); |
| 418 | return rval; |
| 419 | } |
| 420 | /* pwm */ |
| 421 | if (pdata->pwm_ctrl != LM3630A_PWM_DISABLE) { |
| 422 | pchip->pwmd = devm_pwm_get(pchip->dev, "lm3630a-pwm"); |
| 423 | if (IS_ERR(pchip->pwmd)) { |
| 424 | dev_err(&client->dev, "fail : get pwm device\n"); |
| 425 | return PTR_ERR(pchip->pwmd); |
| 426 | } |
| 427 | } |
| 428 | pchip->pwmd->period = pdata->pwm_period; |
| 429 | |
| 430 | /* interrupt enable : irq 0 is not allowed */ |
| 431 | pchip->irq = client->irq; |
| 432 | if (pchip->irq) { |
| 433 | rval = lm3630a_intr_config(pchip); |
| 434 | if (rval < 0) |
| 435 | return rval; |
| 436 | } |
| 437 | dev_info(&client->dev, "LM3630A backlight register OK.\n"); |
| 438 | return 0; |
| 439 | } |
| 440 | |
| 441 | static int lm3630a_remove(struct i2c_client *client) |
| 442 | { |
| 443 | int rval; |
| 444 | struct lm3630a_chip *pchip = i2c_get_clientdata(client); |
| 445 | |
| 446 | rval = lm3630a_write(pchip, REG_BRT_A, 0); |
| 447 | if (rval < 0) |
| 448 | dev_err(pchip->dev, "i2c failed to access register\n"); |
| 449 | |
| 450 | rval = lm3630a_write(pchip, REG_BRT_B, 0); |
| 451 | if (rval < 0) |
| 452 | dev_err(pchip->dev, "i2c failed to access register\n"); |
| 453 | |
| 454 | if (pchip->irq) { |
| 455 | free_irq(pchip->irq, pchip); |
| 456 | flush_workqueue(pchip->irqthread); |
| 457 | destroy_workqueue(pchip->irqthread); |
| 458 | } |
| 459 | return 0; |
| 460 | } |
| 461 | |
| 462 | static const struct i2c_device_id lm3630a_id[] = { |
| 463 | {LM3630A_NAME, 0}, |
| 464 | {} |
| 465 | }; |
| 466 | |
| 467 | MODULE_DEVICE_TABLE(i2c, lm3630a_id); |
| 468 | |
| 469 | static struct i2c_driver lm3630a_i2c_driver = { |
| 470 | .driver = { |
| 471 | .name = LM3630A_NAME, |
| 472 | }, |
| 473 | .probe = lm3630a_probe, |
| 474 | .remove = lm3630a_remove, |
| 475 | .id_table = lm3630a_id, |
| 476 | }; |
| 477 | |
| 478 | module_i2c_driver(lm3630a_i2c_driver); |
| 479 | |
| 480 | MODULE_DESCRIPTION("Texas Instruments Backlight driver for LM3630A"); |
| 481 | MODULE_AUTHOR("Daniel Jeong <gshark.jeong@gmail.com>"); |
| 482 | MODULE_AUTHOR("LDD MLP <ldd-mlp@list.ti.com>"); |
| 483 | MODULE_LICENSE("GPL v2"); |