blob: 2dc63d61f2ea885991977bb3c830b0f9b2f6cc27 [file] [log] [blame]
Agustin Vega-Frias3071f132017-03-31 14:13:43 -04001/*
2 * Driver for the L3 cache PMUs in Qualcomm Technologies chips.
3 *
4 * The driver supports a distributed cache architecture where the overall
5 * cache for a socket is comprised of multiple slices each with its own PMU.
6 * Access to each individual PMU is provided even though all CPUs share all
7 * the slices. User space needs to aggregate to individual counts to provide
8 * a global picture.
9 *
10 * See Documentation/perf/qcom_l3_pmu.txt for more details.
11 *
12 * Copyright (c) 2015-2017, The Linux Foundation. All rights reserved.
13 *
14 * This program is free software; you can redistribute it and/or modify
15 * it under the terms of the GNU General Public License version 2 and
16 * only version 2 as published by the Free Software Foundation.
17 *
18 * This program is distributed in the hope that it will be useful,
19 * but WITHOUT ANY WARRANTY; without even the implied warranty of
20 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
21 * GNU General Public License for more details.
22 */
23
24#include <linux/acpi.h>
25#include <linux/bitops.h>
26#include <linux/interrupt.h>
27#include <linux/io.h>
28#include <linux/list.h>
29#include <linux/module.h>
30#include <linux/perf_event.h>
31#include <linux/platform_device.h>
32
33/*
34 * General constants
35 */
36
37/* Number of counters on each PMU */
38#define L3_NUM_COUNTERS 8
39/* Mask for the event type field within perf_event_attr.config and EVTYPE reg */
40#define L3_EVTYPE_MASK 0xFF
41/*
42 * Bit position of the 'long counter' flag within perf_event_attr.config.
43 * Reserve some space between the event type and this flag to allow expansion
44 * in the event type field.
45 */
46#define L3_EVENT_LC_BIT 32
47
48/*
49 * Register offsets
50 */
51
52/* Perfmon registers */
53#define L3_HML3_PM_CR 0x000
54#define L3_HML3_PM_EVCNTR(__cntr) (0x420 + ((__cntr) & 0x7) * 8)
55#define L3_HML3_PM_CNTCTL(__cntr) (0x120 + ((__cntr) & 0x7) * 8)
56#define L3_HML3_PM_EVTYPE(__cntr) (0x220 + ((__cntr) & 0x7) * 8)
57#define L3_HML3_PM_FILTRA 0x300
58#define L3_HML3_PM_FILTRB 0x308
59#define L3_HML3_PM_FILTRC 0x310
60#define L3_HML3_PM_FILTRAM 0x304
61#define L3_HML3_PM_FILTRBM 0x30C
62#define L3_HML3_PM_FILTRCM 0x314
63
64/* Basic counter registers */
65#define L3_M_BC_CR 0x500
66#define L3_M_BC_SATROLL_CR 0x504
67#define L3_M_BC_CNTENSET 0x508
68#define L3_M_BC_CNTENCLR 0x50C
69#define L3_M_BC_INTENSET 0x510
70#define L3_M_BC_INTENCLR 0x514
71#define L3_M_BC_GANG 0x718
72#define L3_M_BC_OVSR 0x740
73#define L3_M_BC_IRQCTL 0x96C
74
75/*
76 * Bit field definitions
77 */
78
79/* L3_HML3_PM_CR */
80#define PM_CR_RESET (0)
81
82/* L3_HML3_PM_XCNTCTL/L3_HML3_PM_CNTCTLx */
83#define PMCNT_RESET (0)
84
85/* L3_HML3_PM_EVTYPEx */
86#define EVSEL(__val) ((__val) & L3_EVTYPE_MASK)
87
88/* Reset value for all the filter registers */
89#define PM_FLTR_RESET (0)
90
91/* L3_M_BC_CR */
92#define BC_RESET (1UL << 1)
93#define BC_ENABLE (1UL << 0)
94
95/* L3_M_BC_SATROLL_CR */
96#define BC_SATROLL_CR_RESET (0)
97
98/* L3_M_BC_CNTENSET */
99#define PMCNTENSET(__cntr) (1UL << ((__cntr) & 0x7))
100
101/* L3_M_BC_CNTENCLR */
102#define PMCNTENCLR(__cntr) (1UL << ((__cntr) & 0x7))
103#define BC_CNTENCLR_RESET (0xFF)
104
105/* L3_M_BC_INTENSET */
106#define PMINTENSET(__cntr) (1UL << ((__cntr) & 0x7))
107
108/* L3_M_BC_INTENCLR */
109#define PMINTENCLR(__cntr) (1UL << ((__cntr) & 0x7))
110#define BC_INTENCLR_RESET (0xFF)
111
112/* L3_M_BC_GANG */
113#define GANG_EN(__cntr) (1UL << ((__cntr) & 0x7))
114#define BC_GANG_RESET (0)
115
116/* L3_M_BC_OVSR */
117#define PMOVSRCLR(__cntr) (1UL << ((__cntr) & 0x7))
118#define PMOVSRCLR_RESET (0xFF)
119
120/* L3_M_BC_IRQCTL */
121#define PMIRQONMSBEN(__cntr) (1UL << ((__cntr) & 0x7))
122#define BC_IRQCTL_RESET (0x0)
123
124/*
125 * Events
126 */
127
128#define L3_EVENT_CYCLES 0x01
129#define L3_EVENT_READ_HIT 0x20
130#define L3_EVENT_READ_MISS 0x21
131#define L3_EVENT_READ_HIT_D 0x22
132#define L3_EVENT_READ_MISS_D 0x23
133#define L3_EVENT_WRITE_HIT 0x24
134#define L3_EVENT_WRITE_MISS 0x25
135
136/*
137 * Decoding of settings from perf_event_attr
138 *
139 * The config format for perf events is:
140 * - config: bits 0-7: event type
141 * bit 32: HW counter size requested, 0: 32 bits, 1: 64 bits
142 */
143
144static inline u32 get_event_type(struct perf_event *event)
145{
146 return (event->attr.config) & L3_EVTYPE_MASK;
147}
148
149static inline bool event_uses_long_counter(struct perf_event *event)
150{
151 return !!(event->attr.config & BIT_ULL(L3_EVENT_LC_BIT));
152}
153
154static inline int event_num_counters(struct perf_event *event)
155{
156 return event_uses_long_counter(event) ? 2 : 1;
157}
158
159/*
160 * Main PMU, inherits from the core perf PMU type
161 */
162struct l3cache_pmu {
163 struct pmu pmu;
164 struct hlist_node node;
165 void __iomem *regs;
166 struct perf_event *events[L3_NUM_COUNTERS];
167 unsigned long used_mask[BITS_TO_LONGS(L3_NUM_COUNTERS)];
168 cpumask_t cpumask;
169};
170
171#define to_l3cache_pmu(p) (container_of(p, struct l3cache_pmu, pmu))
172
173/*
174 * Type used to group hardware counter operations
175 *
176 * Used to implement two types of hardware counters, standard (32bits) and
177 * long (64bits). The hardware supports counter chaining which we use to
178 * implement long counters. This support is exposed via the 'lc' flag field
179 * in perf_event_attr.config.
180 */
181struct l3cache_event_ops {
182 /* Called to start event monitoring */
183 void (*start)(struct perf_event *event);
184 /* Called to stop event monitoring */
185 void (*stop)(struct perf_event *event, int flags);
186 /* Called to update the perf_event */
187 void (*update)(struct perf_event *event);
188};
189
190/*
191 * Implementation of long counter operations
192 *
193 * 64bit counters are implemented by chaining two of the 32bit physical
194 * counters. The PMU only supports chaining of adjacent even/odd pairs
195 * and for simplicity the driver always configures the odd counter to
196 * count the overflows of the lower-numbered even counter. Note that since
197 * the resulting hardware counter is 64bits no IRQs are required to maintain
198 * the software counter which is also 64bits.
199 */
200
201static void qcom_l3_cache__64bit_counter_start(struct perf_event *event)
202{
203 struct l3cache_pmu *l3pmu = to_l3cache_pmu(event->pmu);
204 int idx = event->hw.idx;
205 u32 evsel = get_event_type(event);
206 u32 gang;
207
208 /* Set the odd counter to count the overflows of the even counter */
209 gang = readl_relaxed(l3pmu->regs + L3_M_BC_GANG);
210 gang |= GANG_EN(idx + 1);
211 writel_relaxed(gang, l3pmu->regs + L3_M_BC_GANG);
212
213 /* Initialize the hardware counters and reset prev_count*/
214 local64_set(&event->hw.prev_count, 0);
215 writel_relaxed(0, l3pmu->regs + L3_HML3_PM_EVCNTR(idx + 1));
216 writel_relaxed(0, l3pmu->regs + L3_HML3_PM_EVCNTR(idx));
217
218 /*
219 * Set the event types, the upper half must use zero and the lower
220 * half the actual event type
221 */
222 writel_relaxed(EVSEL(0), l3pmu->regs + L3_HML3_PM_EVTYPE(idx + 1));
223 writel_relaxed(EVSEL(evsel), l3pmu->regs + L3_HML3_PM_EVTYPE(idx));
224
225 /* Finally, enable the counters */
226 writel_relaxed(PMCNT_RESET, l3pmu->regs + L3_HML3_PM_CNTCTL(idx + 1));
227 writel_relaxed(PMCNTENSET(idx + 1), l3pmu->regs + L3_M_BC_CNTENSET);
228 writel_relaxed(PMCNT_RESET, l3pmu->regs + L3_HML3_PM_CNTCTL(idx));
229 writel_relaxed(PMCNTENSET(idx), l3pmu->regs + L3_M_BC_CNTENSET);
230}
231
232static void qcom_l3_cache__64bit_counter_stop(struct perf_event *event,
233 int flags)
234{
235 struct l3cache_pmu *l3pmu = to_l3cache_pmu(event->pmu);
236 int idx = event->hw.idx;
237 u32 gang = readl_relaxed(l3pmu->regs + L3_M_BC_GANG);
238
239 /* Disable the counters */
240 writel_relaxed(PMCNTENCLR(idx), l3pmu->regs + L3_M_BC_CNTENCLR);
241 writel_relaxed(PMCNTENCLR(idx + 1), l3pmu->regs + L3_M_BC_CNTENCLR);
242
243 /* Disable chaining */
244 writel_relaxed(gang & ~GANG_EN(idx + 1), l3pmu->regs + L3_M_BC_GANG);
245}
246
247static void qcom_l3_cache__64bit_counter_update(struct perf_event *event)
248{
249 struct l3cache_pmu *l3pmu = to_l3cache_pmu(event->pmu);
250 int idx = event->hw.idx;
251 u32 hi, lo;
252 u64 prev, new;
253
254 do {
255 prev = local64_read(&event->hw.prev_count);
256 do {
257 hi = readl_relaxed(l3pmu->regs + L3_HML3_PM_EVCNTR(idx + 1));
258 lo = readl_relaxed(l3pmu->regs + L3_HML3_PM_EVCNTR(idx));
259 } while (hi != readl_relaxed(l3pmu->regs + L3_HML3_PM_EVCNTR(idx + 1)));
260 new = ((u64)hi << 32) | lo;
261 } while (local64_cmpxchg(&event->hw.prev_count, prev, new) != prev);
262
263 local64_add(new - prev, &event->count);
264}
265
266static const struct l3cache_event_ops event_ops_long = {
267 .start = qcom_l3_cache__64bit_counter_start,
268 .stop = qcom_l3_cache__64bit_counter_stop,
269 .update = qcom_l3_cache__64bit_counter_update,
270};
271
272/*
273 * Implementation of standard counter operations
274 *
275 * 32bit counters use a single physical counter and a hardware feature that
276 * asserts the overflow IRQ on the toggling of the most significant bit in
277 * the counter. This feature allows the counters to be left free-running
278 * without needing the usual reprogramming required to properly handle races
279 * during concurrent calls to update.
280 */
281
282static void qcom_l3_cache__32bit_counter_start(struct perf_event *event)
283{
284 struct l3cache_pmu *l3pmu = to_l3cache_pmu(event->pmu);
285 int idx = event->hw.idx;
286 u32 evsel = get_event_type(event);
287 u32 irqctl = readl_relaxed(l3pmu->regs + L3_M_BC_IRQCTL);
288
289 /* Set the counter to assert the overflow IRQ on MSB toggling */
290 writel_relaxed(irqctl | PMIRQONMSBEN(idx), l3pmu->regs + L3_M_BC_IRQCTL);
291
292 /* Initialize the hardware counter and reset prev_count*/
293 local64_set(&event->hw.prev_count, 0);
294 writel_relaxed(0, l3pmu->regs + L3_HML3_PM_EVCNTR(idx));
295
296 /* Set the event type */
297 writel_relaxed(EVSEL(evsel), l3pmu->regs + L3_HML3_PM_EVTYPE(idx));
298
299 /* Enable interrupt generation by this counter */
300 writel_relaxed(PMINTENSET(idx), l3pmu->regs + L3_M_BC_INTENSET);
301
302 /* Finally, enable the counter */
303 writel_relaxed(PMCNT_RESET, l3pmu->regs + L3_HML3_PM_CNTCTL(idx));
304 writel_relaxed(PMCNTENSET(idx), l3pmu->regs + L3_M_BC_CNTENSET);
305}
306
307static void qcom_l3_cache__32bit_counter_stop(struct perf_event *event,
308 int flags)
309{
310 struct l3cache_pmu *l3pmu = to_l3cache_pmu(event->pmu);
311 int idx = event->hw.idx;
312 u32 irqctl = readl_relaxed(l3pmu->regs + L3_M_BC_IRQCTL);
313
314 /* Disable the counter */
315 writel_relaxed(PMCNTENCLR(idx), l3pmu->regs + L3_M_BC_CNTENCLR);
316
317 /* Disable interrupt generation by this counter */
318 writel_relaxed(PMINTENCLR(idx), l3pmu->regs + L3_M_BC_INTENCLR);
319
320 /* Set the counter to not assert the overflow IRQ on MSB toggling */
321 writel_relaxed(irqctl & ~PMIRQONMSBEN(idx), l3pmu->regs + L3_M_BC_IRQCTL);
322}
323
324static void qcom_l3_cache__32bit_counter_update(struct perf_event *event)
325{
326 struct l3cache_pmu *l3pmu = to_l3cache_pmu(event->pmu);
327 int idx = event->hw.idx;
328 u32 prev, new;
329
330 do {
331 prev = local64_read(&event->hw.prev_count);
332 new = readl_relaxed(l3pmu->regs + L3_HML3_PM_EVCNTR(idx));
333 } while (local64_cmpxchg(&event->hw.prev_count, prev, new) != prev);
334
335 local64_add(new - prev, &event->count);
336}
337
338static const struct l3cache_event_ops event_ops_std = {
339 .start = qcom_l3_cache__32bit_counter_start,
340 .stop = qcom_l3_cache__32bit_counter_stop,
341 .update = qcom_l3_cache__32bit_counter_update,
342};
343
344/* Retrieve the appropriate operations for the given event */
345static
346const struct l3cache_event_ops *l3cache_event_get_ops(struct perf_event *event)
347{
348 if (event_uses_long_counter(event))
349 return &event_ops_long;
350 else
351 return &event_ops_std;
352}
353
354/*
355 * Top level PMU functions.
356 */
357
358static inline void qcom_l3_cache__init(struct l3cache_pmu *l3pmu)
359{
360 int i;
361
362 writel_relaxed(BC_RESET, l3pmu->regs + L3_M_BC_CR);
363
364 /*
365 * Use writel for the first programming command to ensure the basic
366 * counter unit is stopped before proceeding
367 */
368 writel(BC_SATROLL_CR_RESET, l3pmu->regs + L3_M_BC_SATROLL_CR);
369
370 writel_relaxed(BC_CNTENCLR_RESET, l3pmu->regs + L3_M_BC_CNTENCLR);
371 writel_relaxed(BC_INTENCLR_RESET, l3pmu->regs + L3_M_BC_INTENCLR);
372 writel_relaxed(PMOVSRCLR_RESET, l3pmu->regs + L3_M_BC_OVSR);
373 writel_relaxed(BC_GANG_RESET, l3pmu->regs + L3_M_BC_GANG);
374 writel_relaxed(BC_IRQCTL_RESET, l3pmu->regs + L3_M_BC_IRQCTL);
375 writel_relaxed(PM_CR_RESET, l3pmu->regs + L3_HML3_PM_CR);
376
377 for (i = 0; i < L3_NUM_COUNTERS; ++i) {
378 writel_relaxed(PMCNT_RESET, l3pmu->regs + L3_HML3_PM_CNTCTL(i));
379 writel_relaxed(EVSEL(0), l3pmu->regs + L3_HML3_PM_EVTYPE(i));
380 }
381
382 writel_relaxed(PM_FLTR_RESET, l3pmu->regs + L3_HML3_PM_FILTRA);
383 writel_relaxed(PM_FLTR_RESET, l3pmu->regs + L3_HML3_PM_FILTRAM);
384 writel_relaxed(PM_FLTR_RESET, l3pmu->regs + L3_HML3_PM_FILTRB);
385 writel_relaxed(PM_FLTR_RESET, l3pmu->regs + L3_HML3_PM_FILTRBM);
386 writel_relaxed(PM_FLTR_RESET, l3pmu->regs + L3_HML3_PM_FILTRC);
387 writel_relaxed(PM_FLTR_RESET, l3pmu->regs + L3_HML3_PM_FILTRCM);
388
389 /*
390 * Use writel here to ensure all programming commands are done
391 * before proceeding
392 */
393 writel(BC_ENABLE, l3pmu->regs + L3_M_BC_CR);
394}
395
396static irqreturn_t qcom_l3_cache__handle_irq(int irq_num, void *data)
397{
398 struct l3cache_pmu *l3pmu = data;
399 /* Read the overflow status register */
400 long status = readl_relaxed(l3pmu->regs + L3_M_BC_OVSR);
401 int idx;
402
403 if (status == 0)
404 return IRQ_NONE;
405
406 /* Clear the bits we read on the overflow status register */
407 writel_relaxed(status, l3pmu->regs + L3_M_BC_OVSR);
408
409 for_each_set_bit(idx, &status, L3_NUM_COUNTERS) {
410 struct perf_event *event;
411 const struct l3cache_event_ops *ops;
412
413 event = l3pmu->events[idx];
414 if (!event)
415 continue;
416
417 /*
418 * Since the IRQ is not enabled for events using long counters
419 * we should never see one of those here, however, be consistent
420 * and use the ops indirections like in the other operations.
421 */
422
423 ops = l3cache_event_get_ops(event);
424 ops->update(event);
425 }
426
427 return IRQ_HANDLED;
428}
429
430/*
431 * Implementation of abstract pmu functionality required by
432 * the core perf events code.
433 */
434
435static void qcom_l3_cache__pmu_enable(struct pmu *pmu)
436{
437 struct l3cache_pmu *l3pmu = to_l3cache_pmu(pmu);
438
439 /* Ensure the other programming commands are observed before enabling */
440 wmb();
441
442 writel_relaxed(BC_ENABLE, l3pmu->regs + L3_M_BC_CR);
443}
444
445static void qcom_l3_cache__pmu_disable(struct pmu *pmu)
446{
447 struct l3cache_pmu *l3pmu = to_l3cache_pmu(pmu);
448
449 writel_relaxed(0, l3pmu->regs + L3_M_BC_CR);
450
451 /* Ensure the basic counter unit is stopped before proceeding */
452 wmb();
453}
454
455/*
456 * We must NOT create groups containing events from multiple hardware PMUs,
457 * although mixing different software and hardware PMUs is allowed.
458 */
459static bool qcom_l3_cache__validate_event_group(struct perf_event *event)
460{
461 struct perf_event *leader = event->group_leader;
462 struct perf_event *sibling;
463 int counters = 0;
464
465 if (leader->pmu != event->pmu && !is_software_event(leader))
466 return false;
467
468 counters = event_num_counters(event);
469 counters += event_num_counters(leader);
470
Peter Zijlstraedb39592018-03-15 17:36:56 +0100471 for_each_sibling_event(sibling, leader) {
Agustin Vega-Frias3071f132017-03-31 14:13:43 -0400472 if (is_software_event(sibling))
473 continue;
474 if (sibling->pmu != event->pmu)
475 return false;
476 counters += event_num_counters(sibling);
477 }
478
479 /*
480 * If the group requires more counters than the HW has, it
481 * cannot ever be scheduled.
482 */
483 return counters <= L3_NUM_COUNTERS;
484}
485
486static int qcom_l3_cache__event_init(struct perf_event *event)
487{
488 struct l3cache_pmu *l3pmu = to_l3cache_pmu(event->pmu);
489 struct hw_perf_event *hwc = &event->hw;
490
491 /*
492 * Is the event for this PMU?
493 */
494 if (event->attr.type != event->pmu->type)
495 return -ENOENT;
496
497 /*
498 * There are no per-counter mode filters in the PMU.
499 */
500 if (event->attr.exclude_user || event->attr.exclude_kernel ||
501 event->attr.exclude_hv || event->attr.exclude_idle)
502 return -EINVAL;
503
504 /*
505 * Sampling not supported since these events are not core-attributable.
506 */
507 if (hwc->sample_period)
508 return -EINVAL;
509
510 /*
511 * Task mode not available, we run the counters as socket counters,
512 * not attributable to any CPU and therefore cannot attribute per-task.
513 */
514 if (event->cpu < 0)
515 return -EINVAL;
516
517 /* Validate the group */
518 if (!qcom_l3_cache__validate_event_group(event))
519 return -EINVAL;
520
521 hwc->idx = -1;
522
523 /*
524 * Many perf core operations (eg. events rotation) operate on a
525 * single CPU context. This is obvious for CPU PMUs, where one
526 * expects the same sets of events being observed on all CPUs,
527 * but can lead to issues for off-core PMUs, like this one, where
528 * each event could be theoretically assigned to a different CPU.
529 * To mitigate this, we enforce CPU assignment to one designated
530 * processor (the one described in the "cpumask" attribute exported
531 * by the PMU device). perf user space tools honor this and avoid
532 * opening more than one copy of the events.
533 */
534 event->cpu = cpumask_first(&l3pmu->cpumask);
535
536 return 0;
537}
538
539static void qcom_l3_cache__event_start(struct perf_event *event, int flags)
540{
541 struct hw_perf_event *hwc = &event->hw;
542 const struct l3cache_event_ops *ops = l3cache_event_get_ops(event);
543
544 hwc->state = 0;
545 ops->start(event);
546}
547
548static void qcom_l3_cache__event_stop(struct perf_event *event, int flags)
549{
550 struct hw_perf_event *hwc = &event->hw;
551 const struct l3cache_event_ops *ops = l3cache_event_get_ops(event);
552
553 if (hwc->state & PERF_HES_STOPPED)
554 return;
555
556 ops->stop(event, flags);
557 if (flags & PERF_EF_UPDATE)
558 ops->update(event);
559 hwc->state |= PERF_HES_STOPPED | PERF_HES_UPTODATE;
560}
561
562static int qcom_l3_cache__event_add(struct perf_event *event, int flags)
563{
564 struct l3cache_pmu *l3pmu = to_l3cache_pmu(event->pmu);
565 struct hw_perf_event *hwc = &event->hw;
566 int order = event_uses_long_counter(event) ? 1 : 0;
567 int idx;
568
569 /*
570 * Try to allocate a counter.
571 */
572 idx = bitmap_find_free_region(l3pmu->used_mask, L3_NUM_COUNTERS, order);
573 if (idx < 0)
574 /* The counters are all in use. */
575 return -EAGAIN;
576
577 hwc->idx = idx;
578 hwc->state = PERF_HES_STOPPED | PERF_HES_UPTODATE;
579 l3pmu->events[idx] = event;
580
581 if (flags & PERF_EF_START)
582 qcom_l3_cache__event_start(event, 0);
583
584 /* Propagate changes to the userspace mapping. */
585 perf_event_update_userpage(event);
586
587 return 0;
588}
589
590static void qcom_l3_cache__event_del(struct perf_event *event, int flags)
591{
592 struct l3cache_pmu *l3pmu = to_l3cache_pmu(event->pmu);
593 struct hw_perf_event *hwc = &event->hw;
594 int order = event_uses_long_counter(event) ? 1 : 0;
595
596 /* Stop and clean up */
597 qcom_l3_cache__event_stop(event, flags | PERF_EF_UPDATE);
598 l3pmu->events[hwc->idx] = NULL;
599 bitmap_release_region(l3pmu->used_mask, hwc->idx, order);
600
601 /* Propagate changes to the userspace mapping. */
602 perf_event_update_userpage(event);
603}
604
605static void qcom_l3_cache__event_read(struct perf_event *event)
606{
607 const struct l3cache_event_ops *ops = l3cache_event_get_ops(event);
608
609 ops->update(event);
610}
611
612/*
613 * Add sysfs attributes
614 *
615 * We export:
616 * - formats, used by perf user space and other tools to configure events
617 * - events, used by perf user space and other tools to create events
618 * symbolically, e.g.:
619 * perf stat -a -e l3cache_0_0/event=read-miss/ ls
620 * perf stat -a -e l3cache_0_0/event=0x21/ ls
621 * - cpumask, used by perf user space and other tools to know on which CPUs
622 * to open the events
623 */
624
625/* formats */
626
627static ssize_t l3cache_pmu_format_show(struct device *dev,
628 struct device_attribute *attr, char *buf)
629{
630 struct dev_ext_attribute *eattr;
631
632 eattr = container_of(attr, struct dev_ext_attribute, attr);
633 return sprintf(buf, "%s\n", (char *) eattr->var);
634}
635
636#define L3CACHE_PMU_FORMAT_ATTR(_name, _config) \
637 (&((struct dev_ext_attribute[]) { \
638 { .attr = __ATTR(_name, 0444, l3cache_pmu_format_show, NULL), \
639 .var = (void *) _config, } \
640 })[0].attr.attr)
641
642static struct attribute *qcom_l3_cache_pmu_formats[] = {
643 L3CACHE_PMU_FORMAT_ATTR(event, "config:0-7"),
644 L3CACHE_PMU_FORMAT_ATTR(lc, "config:" __stringify(L3_EVENT_LC_BIT)),
645 NULL,
646};
647
648static struct attribute_group qcom_l3_cache_pmu_format_group = {
649 .name = "format",
650 .attrs = qcom_l3_cache_pmu_formats,
651};
652
653/* events */
654
655static ssize_t l3cache_pmu_event_show(struct device *dev,
656 struct device_attribute *attr, char *page)
657{
658 struct perf_pmu_events_attr *pmu_attr;
659
660 pmu_attr = container_of(attr, struct perf_pmu_events_attr, attr);
661 return sprintf(page, "event=0x%02llx\n", pmu_attr->id);
662}
663
664#define L3CACHE_EVENT_ATTR(_name, _id) \
665 (&((struct perf_pmu_events_attr[]) { \
666 { .attr = __ATTR(_name, 0444, l3cache_pmu_event_show, NULL), \
667 .id = _id, } \
668 })[0].attr.attr)
669
670static struct attribute *qcom_l3_cache_pmu_events[] = {
671 L3CACHE_EVENT_ATTR(cycles, L3_EVENT_CYCLES),
672 L3CACHE_EVENT_ATTR(read-hit, L3_EVENT_READ_HIT),
673 L3CACHE_EVENT_ATTR(read-miss, L3_EVENT_READ_MISS),
674 L3CACHE_EVENT_ATTR(read-hit-d-side, L3_EVENT_READ_HIT_D),
675 L3CACHE_EVENT_ATTR(read-miss-d-side, L3_EVENT_READ_MISS_D),
676 L3CACHE_EVENT_ATTR(write-hit, L3_EVENT_WRITE_HIT),
677 L3CACHE_EVENT_ATTR(write-miss, L3_EVENT_WRITE_MISS),
678 NULL
679};
680
681static struct attribute_group qcom_l3_cache_pmu_events_group = {
682 .name = "events",
683 .attrs = qcom_l3_cache_pmu_events,
684};
685
686/* cpumask */
687
688static ssize_t qcom_l3_cache_pmu_cpumask_show(struct device *dev,
689 struct device_attribute *attr, char *buf)
690{
691 struct l3cache_pmu *l3pmu = to_l3cache_pmu(dev_get_drvdata(dev));
692
693 return cpumap_print_to_pagebuf(true, buf, &l3pmu->cpumask);
694}
695
696static DEVICE_ATTR(cpumask, 0444, qcom_l3_cache_pmu_cpumask_show, NULL);
697
698static struct attribute *qcom_l3_cache_pmu_cpumask_attrs[] = {
699 &dev_attr_cpumask.attr,
700 NULL,
701};
702
703static struct attribute_group qcom_l3_cache_pmu_cpumask_attr_group = {
704 .attrs = qcom_l3_cache_pmu_cpumask_attrs,
705};
706
707/*
708 * Per PMU device attribute groups
709 */
710static const struct attribute_group *qcom_l3_cache_pmu_attr_grps[] = {
711 &qcom_l3_cache_pmu_format_group,
712 &qcom_l3_cache_pmu_events_group,
713 &qcom_l3_cache_pmu_cpumask_attr_group,
714 NULL,
715};
716
717/*
718 * Probing functions and data.
719 */
720
721static int qcom_l3_cache_pmu_online_cpu(unsigned int cpu, struct hlist_node *node)
722{
723 struct l3cache_pmu *l3pmu = hlist_entry_safe(node, struct l3cache_pmu, node);
724
725 /* If there is not a CPU/PMU association pick this CPU */
726 if (cpumask_empty(&l3pmu->cpumask))
727 cpumask_set_cpu(cpu, &l3pmu->cpumask);
728
729 return 0;
730}
731
732static int qcom_l3_cache_pmu_offline_cpu(unsigned int cpu, struct hlist_node *node)
733{
734 struct l3cache_pmu *l3pmu = hlist_entry_safe(node, struct l3cache_pmu, node);
735 unsigned int target;
736
737 if (!cpumask_test_and_clear_cpu(cpu, &l3pmu->cpumask))
738 return 0;
739 target = cpumask_any_but(cpu_online_mask, cpu);
740 if (target >= nr_cpu_ids)
741 return 0;
742 perf_pmu_migrate_context(&l3pmu->pmu, cpu, target);
743 cpumask_set_cpu(target, &l3pmu->cpumask);
744 return 0;
745}
746
747static int qcom_l3_cache_pmu_probe(struct platform_device *pdev)
748{
749 struct l3cache_pmu *l3pmu;
750 struct acpi_device *acpi_dev;
751 struct resource *memrc;
752 int ret;
753 char *name;
754
755 /* Initialize the PMU data structures */
756
757 acpi_dev = ACPI_COMPANION(&pdev->dev);
758 if (!acpi_dev)
759 return -ENODEV;
760
761 l3pmu = devm_kzalloc(&pdev->dev, sizeof(*l3pmu), GFP_KERNEL);
762 name = devm_kasprintf(&pdev->dev, GFP_KERNEL, "l3cache_%s_%s",
763 acpi_dev->parent->pnp.unique_id, acpi_dev->pnp.unique_id);
764 if (!l3pmu || !name)
765 return -ENOMEM;
766
767 l3pmu->pmu = (struct pmu) {
768 .task_ctx_nr = perf_invalid_context,
769
770 .pmu_enable = qcom_l3_cache__pmu_enable,
771 .pmu_disable = qcom_l3_cache__pmu_disable,
772 .event_init = qcom_l3_cache__event_init,
773 .add = qcom_l3_cache__event_add,
774 .del = qcom_l3_cache__event_del,
775 .start = qcom_l3_cache__event_start,
776 .stop = qcom_l3_cache__event_stop,
777 .read = qcom_l3_cache__event_read,
778
779 .attr_groups = qcom_l3_cache_pmu_attr_grps,
780 };
781
782 memrc = platform_get_resource(pdev, IORESOURCE_MEM, 0);
783 l3pmu->regs = devm_ioremap_resource(&pdev->dev, memrc);
784 if (IS_ERR(l3pmu->regs)) {
785 dev_err(&pdev->dev, "Can't map PMU @%pa\n", &memrc->start);
786 return PTR_ERR(l3pmu->regs);
787 }
788
789 qcom_l3_cache__init(l3pmu);
790
791 ret = platform_get_irq(pdev, 0);
792 if (ret <= 0)
793 return ret;
794
795 ret = devm_request_irq(&pdev->dev, ret, qcom_l3_cache__handle_irq, 0,
796 name, l3pmu);
797 if (ret) {
798 dev_err(&pdev->dev, "Request for IRQ failed for slice @%pa\n",
799 &memrc->start);
800 return ret;
801 }
802
803 /* Add this instance to the list used by the offline callback */
804 ret = cpuhp_state_add_instance(CPUHP_AP_PERF_ARM_QCOM_L3_ONLINE, &l3pmu->node);
805 if (ret) {
806 dev_err(&pdev->dev, "Error %d registering hotplug", ret);
807 return ret;
808 }
809
810 ret = perf_pmu_register(&l3pmu->pmu, name, -1);
811 if (ret < 0) {
812 dev_err(&pdev->dev, "Failed to register L3 cache PMU (%d)\n", ret);
813 return ret;
814 }
815
816 dev_info(&pdev->dev, "Registered %s, type: %d\n", name, l3pmu->pmu.type);
817
818 return 0;
819}
820
821static const struct acpi_device_id qcom_l3_cache_pmu_acpi_match[] = {
822 { "QCOM8081", },
823 { }
824};
825MODULE_DEVICE_TABLE(acpi, qcom_l3_cache_pmu_acpi_match);
826
827static struct platform_driver qcom_l3_cache_pmu_driver = {
828 .driver = {
829 .name = "qcom-l3cache-pmu",
830 .acpi_match_table = ACPI_PTR(qcom_l3_cache_pmu_acpi_match),
831 },
832 .probe = qcom_l3_cache_pmu_probe,
833};
834
835static int __init register_qcom_l3_cache_pmu_driver(void)
836{
837 int ret;
838
839 /* Install a hook to update the reader CPU in case it goes offline */
840 ret = cpuhp_setup_state_multi(CPUHP_AP_PERF_ARM_QCOM_L3_ONLINE,
841 "perf/qcom/l3cache:online",
842 qcom_l3_cache_pmu_online_cpu,
843 qcom_l3_cache_pmu_offline_cpu);
844 if (ret)
845 return ret;
846
847 return platform_driver_register(&qcom_l3_cache_pmu_driver);
848}
849device_initcall(register_qcom_l3_cache_pmu_driver);