blob: 0d529cb9014398df67893a72efb7f2f171111345 [file] [log] [blame]
Kishon Vijay Abraham I5e8cb402017-04-10 19:25:10 +05301/**
2 * PCI Endpoint *Function* (EPF) header file
3 *
4 * Copyright (C) 2017 Texas Instruments
5 * Author: Kishon Vijay Abraham I <kishon@ti.com>
6 *
7 * This program is free software: you can redistribute it and/or modify
8 * it under the terms of the GNU General Public License version 2 of
9 * the License as published by the Free Software Foundation.
10 */
11
12#ifndef __LINUX_PCI_EPF_H
13#define __LINUX_PCI_EPF_H
14
15#include <linux/device.h>
16#include <linux/mod_devicetable.h>
17
18struct pci_epf;
19
20enum pci_interrupt_pin {
21 PCI_INTERRUPT_UNKNOWN,
22 PCI_INTERRUPT_INTA,
23 PCI_INTERRUPT_INTB,
24 PCI_INTERRUPT_INTC,
25 PCI_INTERRUPT_INTD,
26};
27
28enum pci_barno {
29 BAR_0,
30 BAR_1,
31 BAR_2,
32 BAR_3,
33 BAR_4,
34 BAR_5,
35};
36
37/**
38 * struct pci_epf_header - represents standard configuration header
39 * @vendorid: identifies device manufacturer
40 * @deviceid: identifies a particular device
41 * @revid: specifies a device-specific revision identifier
42 * @progif_code: identifies a specific register-level programming interface
43 * @subclass_code: identifies more specifically the function of the device
44 * @baseclass_code: broadly classifies the type of function the device performs
45 * @cache_line_size: specifies the system cacheline size in units of DWORDs
46 * @subsys_vendor_id: vendor of the add-in card or subsystem
47 * @subsys_id: id specific to vendor
48 * @interrupt_pin: interrupt pin the device (or device function) uses
49 */
50struct pci_epf_header {
51 u16 vendorid;
52 u16 deviceid;
53 u8 revid;
54 u8 progif_code;
55 u8 subclass_code;
56 u8 baseclass_code;
57 u8 cache_line_size;
58 u16 subsys_vendor_id;
59 u16 subsys_id;
60 enum pci_interrupt_pin interrupt_pin;
61};
62
63/**
64 * struct pci_epf_ops - set of function pointers for performing EPF operations
65 * @bind: ops to perform when a EPC device has been bound to EPF device
66 * @unbind: ops to perform when a binding has been lost between a EPC device
67 * and EPF device
68 * @linkup: ops to perform when the EPC device has established a connection with
69 * a host system
70 */
71struct pci_epf_ops {
72 int (*bind)(struct pci_epf *epf);
73 void (*unbind)(struct pci_epf *epf);
74 void (*linkup)(struct pci_epf *epf);
75};
76
77/**
78 * struct pci_epf_driver - represents the PCI EPF driver
79 * @probe: ops to perform when a new EPF device has been bound to the EPF driver
80 * @remove: ops to perform when the binding between the EPF device and EPF
81 * driver is broken
82 * @driver: PCI EPF driver
83 * @ops: set of function pointers for performing EPF operations
84 * @owner: the owner of the module that registers the PCI EPF driver
Kishon Vijay Abraham I3a401a22017-03-27 15:15:01 +053085 * @group: configfs group corresponding to the PCI EPF driver
Kishon Vijay Abraham I5e8cb402017-04-10 19:25:10 +053086 * @id_table: identifies EPF devices for probing
87 */
88struct pci_epf_driver {
89 int (*probe)(struct pci_epf *epf);
90 int (*remove)(struct pci_epf *epf);
91
92 struct device_driver driver;
93 struct pci_epf_ops *ops;
94 struct module *owner;
Kishon Vijay Abraham I3a401a22017-03-27 15:15:01 +053095 struct config_group *group;
Kishon Vijay Abraham I5e8cb402017-04-10 19:25:10 +053096 const struct pci_epf_device_id *id_table;
97};
98
99#define to_pci_epf_driver(drv) (container_of((drv), struct pci_epf_driver, \
100 driver))
101
102/**
103 * struct pci_epf_bar - represents the BAR of EPF device
104 * @phys_addr: physical address that should be mapped to the BAR
105 * @size: the size of the address space present in BAR
106 */
107struct pci_epf_bar {
108 dma_addr_t phys_addr;
109 size_t size;
110};
111
112/**
113 * struct pci_epf - represents the PCI EPF device
114 * @dev: the PCI EPF device
115 * @name: the name of the PCI EPF device
116 * @header: represents standard configuration header
117 * @bar: represents the BAR of EPF device
118 * @msi_interrupts: number of MSI interrupts required by this function
119 * @func_no: unique function number within this endpoint device
120 * @epc: the EPC device to which this EPF device is bound
121 * @driver: the EPF driver to which this EPF device is bound
122 * @list: to add pci_epf as a list of PCI endpoint functions to pci_epc
123 */
124struct pci_epf {
125 struct device dev;
126 const char *name;
127 struct pci_epf_header *header;
128 struct pci_epf_bar bar[6];
129 u8 msi_interrupts;
130 u8 func_no;
131
132 struct pci_epc *epc;
133 struct pci_epf_driver *driver;
134 struct list_head list;
135};
136
137#define to_pci_epf(epf_dev) container_of((epf_dev), struct pci_epf, dev)
138
139#define pci_epf_register_driver(driver) \
140 __pci_epf_register_driver((driver), THIS_MODULE)
141
142static inline void epf_set_drvdata(struct pci_epf *epf, void *data)
143{
144 dev_set_drvdata(&epf->dev, data);
145}
146
147static inline void *epf_get_drvdata(struct pci_epf *epf)
148{
149 return dev_get_drvdata(&epf->dev);
150}
151
152struct pci_epf *pci_epf_create(const char *name);
153void pci_epf_destroy(struct pci_epf *epf);
154int __pci_epf_register_driver(struct pci_epf_driver *driver,
155 struct module *owner);
156void pci_epf_unregister_driver(struct pci_epf_driver *driver);
157void *pci_epf_alloc_space(struct pci_epf *epf, size_t size, enum pci_barno bar);
158void pci_epf_free_space(struct pci_epf *epf, void *addr, enum pci_barno bar);
159int pci_epf_bind(struct pci_epf *epf);
160void pci_epf_unbind(struct pci_epf *epf);
161void pci_epf_linkup(struct pci_epf *epf);
162#endif /* __LINUX_PCI_EPF_H */