Andreas Werner | f436bc2 | 2016-02-29 19:44:43 +0100 | [diff] [blame] | 1 | /* |
| 2 | * MEN 16Z127 GPIO driver |
| 3 | * |
| 4 | * Copyright (C) 2016 MEN Mikroelektronik GmbH (www.men.de) |
| 5 | * |
| 6 | * This program is free software; you can redistribute it and/or modify it |
| 7 | * under the terms of the GNU General Public License as published by the Free |
| 8 | * Software Foundation; version 2 of the License. |
| 9 | */ |
| 10 | |
| 11 | #include <linux/kernel.h> |
| 12 | #include <linux/module.h> |
| 13 | #include <linux/io.h> |
| 14 | #include <linux/err.h> |
| 15 | #include <linux/mcb.h> |
| 16 | #include <linux/bitops.h> |
| 17 | #include <linux/gpio/driver.h> |
| 18 | |
| 19 | #define MEN_Z127_CTRL 0x00 |
| 20 | #define MEN_Z127_PSR 0x04 |
| 21 | #define MEN_Z127_IRQR 0x08 |
| 22 | #define MEN_Z127_GPIODR 0x0c |
| 23 | #define MEN_Z127_IER1 0x10 |
| 24 | #define MEN_Z127_IER2 0x14 |
| 25 | #define MEN_Z127_DBER 0x18 |
| 26 | #define MEN_Z127_ODER 0x1C |
| 27 | #define GPIO_TO_DBCNT_REG(gpio) ((gpio * 4) + 0x80) |
| 28 | |
| 29 | #define MEN_Z127_DB_MIN_US 50 |
| 30 | /* 16 bit compare register. Each bit represents 50us */ |
| 31 | #define MEN_Z127_DB_MAX_US (0xffff * MEN_Z127_DB_MIN_US) |
| 32 | #define MEN_Z127_DB_IN_RANGE(db) ((db >= MEN_Z127_DB_MIN_US) && \ |
| 33 | (db <= MEN_Z127_DB_MAX_US)) |
| 34 | |
| 35 | struct men_z127_gpio { |
| 36 | struct gpio_chip gc; |
| 37 | void __iomem *reg_base; |
Andreas Werner | f436bc2 | 2016-02-29 19:44:43 +0100 | [diff] [blame] | 38 | struct resource *mem; |
| 39 | spinlock_t lock; |
| 40 | }; |
| 41 | |
| 42 | static int men_z127_debounce(struct gpio_chip *gc, unsigned gpio, |
| 43 | unsigned debounce) |
| 44 | { |
| 45 | struct men_z127_gpio *priv = gpiochip_get_data(gc); |
Axel Lin | 86d3f36 | 2016-03-09 20:39:57 +0800 | [diff] [blame^] | 46 | struct device *dev = gc->parent; |
Andreas Werner | f436bc2 | 2016-02-29 19:44:43 +0100 | [diff] [blame] | 47 | unsigned int rnd; |
| 48 | u32 db_en, db_cnt; |
| 49 | |
| 50 | if (!MEN_Z127_DB_IN_RANGE(debounce)) { |
| 51 | dev_err(dev, "debounce value %u out of range", debounce); |
| 52 | return -EINVAL; |
| 53 | } |
| 54 | |
| 55 | if (debounce > 0) { |
| 56 | /* round up or down depending on MSB-1 */ |
| 57 | rnd = fls(debounce) - 1; |
| 58 | |
| 59 | if (rnd && (debounce & BIT(rnd - 1))) |
| 60 | debounce = round_up(debounce, MEN_Z127_DB_MIN_US); |
| 61 | else |
| 62 | debounce = round_down(debounce, MEN_Z127_DB_MIN_US); |
| 63 | |
| 64 | if (debounce > MEN_Z127_DB_MAX_US) |
| 65 | debounce = MEN_Z127_DB_MAX_US; |
| 66 | |
| 67 | /* 50us per register unit */ |
| 68 | debounce /= 50; |
| 69 | } |
| 70 | |
| 71 | spin_lock(&priv->lock); |
| 72 | |
| 73 | db_en = readl(priv->reg_base + MEN_Z127_DBER); |
| 74 | |
| 75 | if (debounce == 0) { |
| 76 | db_en &= ~BIT(gpio); |
| 77 | db_cnt = 0; |
| 78 | } else { |
| 79 | db_en |= BIT(gpio); |
| 80 | db_cnt = debounce; |
| 81 | } |
| 82 | |
| 83 | writel(db_en, priv->reg_base + MEN_Z127_DBER); |
| 84 | writel(db_cnt, priv->reg_base + GPIO_TO_DBCNT_REG(gpio)); |
| 85 | |
| 86 | spin_unlock(&priv->lock); |
| 87 | |
| 88 | return 0; |
| 89 | } |
| 90 | |
| 91 | static int men_z127_request(struct gpio_chip *gc, unsigned gpio_pin) |
| 92 | { |
| 93 | struct men_z127_gpio *priv = gpiochip_get_data(gc); |
| 94 | u32 od_en; |
| 95 | |
| 96 | if (gpio_pin >= gc->ngpio) |
| 97 | return -EINVAL; |
| 98 | |
| 99 | spin_lock(&priv->lock); |
| 100 | od_en = readl(priv->reg_base + MEN_Z127_ODER); |
| 101 | |
| 102 | if (gpiochip_line_is_open_drain(gc, gpio_pin)) |
| 103 | od_en |= BIT(gpio_pin); |
| 104 | else |
| 105 | od_en &= ~BIT(gpio_pin); |
| 106 | |
| 107 | writel(od_en, priv->reg_base + MEN_Z127_ODER); |
| 108 | spin_unlock(&priv->lock); |
| 109 | |
| 110 | return 0; |
| 111 | } |
| 112 | |
| 113 | static int men_z127_probe(struct mcb_device *mdev, |
| 114 | const struct mcb_device_id *id) |
| 115 | { |
| 116 | struct men_z127_gpio *men_z127_gpio; |
| 117 | struct device *dev = &mdev->dev; |
| 118 | int ret; |
| 119 | |
| 120 | men_z127_gpio = devm_kzalloc(dev, sizeof(struct men_z127_gpio), |
| 121 | GFP_KERNEL); |
| 122 | if (!men_z127_gpio) |
| 123 | return -ENOMEM; |
| 124 | |
| 125 | men_z127_gpio->mem = mcb_request_mem(mdev, dev_name(dev)); |
| 126 | if (IS_ERR(men_z127_gpio->mem)) { |
| 127 | dev_err(dev, "failed to request device memory"); |
| 128 | return PTR_ERR(men_z127_gpio->mem); |
| 129 | } |
| 130 | |
| 131 | men_z127_gpio->reg_base = ioremap(men_z127_gpio->mem->start, |
| 132 | resource_size(men_z127_gpio->mem)); |
| 133 | if (men_z127_gpio->reg_base == NULL) { |
| 134 | ret = -ENXIO; |
| 135 | goto err_release; |
| 136 | } |
| 137 | |
Andreas Werner | f436bc2 | 2016-02-29 19:44:43 +0100 | [diff] [blame] | 138 | mcb_set_drvdata(mdev, men_z127_gpio); |
| 139 | |
| 140 | ret = bgpio_init(&men_z127_gpio->gc, &mdev->dev, 4, |
| 141 | men_z127_gpio->reg_base + MEN_Z127_PSR, |
| 142 | men_z127_gpio->reg_base + MEN_Z127_CTRL, |
| 143 | NULL, |
| 144 | men_z127_gpio->reg_base + MEN_Z127_GPIODR, |
| 145 | NULL, 0); |
| 146 | if (ret) |
| 147 | goto err_unmap; |
| 148 | |
| 149 | men_z127_gpio->gc.set_debounce = men_z127_debounce; |
| 150 | men_z127_gpio->gc.request = men_z127_request; |
| 151 | |
| 152 | ret = gpiochip_add_data(&men_z127_gpio->gc, men_z127_gpio); |
| 153 | if (ret) { |
| 154 | dev_err(dev, "failed to register MEN 16Z127 GPIO controller"); |
| 155 | goto err_unmap; |
| 156 | } |
| 157 | |
| 158 | dev_info(dev, "MEN 16Z127 GPIO driver registered"); |
| 159 | |
| 160 | return 0; |
| 161 | |
| 162 | err_unmap: |
| 163 | iounmap(men_z127_gpio->reg_base); |
| 164 | err_release: |
| 165 | mcb_release_mem(men_z127_gpio->mem); |
| 166 | return ret; |
| 167 | } |
| 168 | |
| 169 | static void men_z127_remove(struct mcb_device *mdev) |
| 170 | { |
| 171 | struct men_z127_gpio *men_z127_gpio = mcb_get_drvdata(mdev); |
| 172 | |
| 173 | gpiochip_remove(&men_z127_gpio->gc); |
| 174 | iounmap(men_z127_gpio->reg_base); |
| 175 | mcb_release_mem(men_z127_gpio->mem); |
| 176 | } |
| 177 | |
| 178 | static const struct mcb_device_id men_z127_ids[] = { |
| 179 | { .device = 0x7f }, |
| 180 | { } |
| 181 | }; |
| 182 | MODULE_DEVICE_TABLE(mcb, men_z127_ids); |
| 183 | |
| 184 | static struct mcb_driver men_z127_driver = { |
| 185 | .driver = { |
| 186 | .name = "z127-gpio", |
| 187 | .owner = THIS_MODULE, |
| 188 | }, |
| 189 | .probe = men_z127_probe, |
| 190 | .remove = men_z127_remove, |
| 191 | .id_table = men_z127_ids, |
| 192 | }; |
| 193 | module_mcb_driver(men_z127_driver); |
| 194 | |
| 195 | MODULE_AUTHOR("Andreas Werner <andreas.werner@men.de>"); |
| 196 | MODULE_DESCRIPTION("MEN 16z127 GPIO Controller"); |
| 197 | MODULE_LICENSE("GPL v2"); |
| 198 | MODULE_ALIAS("mcb:16z127"); |