drivers/scsi/libsas/sas_internal.h

/*
 * Serial Attached SCSI (SAS) class internal header file
 *
 * Copyright (C) 2005 Adaptec, Inc.  All rights reserved.
 * Copyright (C) 2005 Luben Tuikov <luben_tuikov@adaptec.com>
 *
 * This file is licensed under GPLv2.
 *
 * This program is free software; you can redistribute it and/or
 * modify it under the terms of the GNU General Public License as
 * published by the Free Software Foundation; either version 2 of the
 * License, or (at your option) any later version.
 *
 * This program is distributed in the hope that it will be useful, but
 * WITHOUT ANY WARRANTY; without even the implied warranty of
 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
 * General Public License for more details.
 *
 * You should have received a copy of the GNU General Public License
 * along with this program; if not, write to the Free Software
 * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307
 * USA
 *
 */

#ifndef _SAS_INTERNAL_H_
#define _SAS_INTERNAL_H_

#include <scsi/scsi.h>
#include <scsi/scsi_host.h>
#include <scsi/scsi_transport_sas.h>
#include <scsi/libsas.h>

#define sas_printk(fmt, ...) printk(KERN_NOTICE "sas: " fmt, ## __VA_ARGS__)

#ifdef SAS_DEBUG
#define SAS_DPRINTK(fmt, ...) printk(KERN_NOTICE "sas: " fmt, ## __VA_ARGS__)
#else
#define SAS_DPRINTK(fmt, ...)
#endif

void sas_scsi_recover_host(struct Scsi_Host *shost);

int sas_show_class(enum sas_class class, char *buf);
int sas_show_proto(enum sas_proto proto, char *buf);
int sas_show_linkrate(enum sas_linkrate linkrate, char *buf);
int sas_show_oob_mode(enum sas_oob_mode oob_mode, char *buf);

int  sas_register_phys(struct sas_ha_struct *sas_ha);
void sas_unregister_phys(struct sas_ha_struct *sas_ha);

int  sas_register_ports(struct sas_ha_struct *sas_ha);
void sas_unregister_ports(struct sas_ha_struct *sas_ha);

enum scsi_eh_timer_return sas_scsi_timed_out(struct scsi_cmnd *);

int  sas_init_queue(struct sas_ha_struct *sas_ha);
int  sas_init_events(struct sas_ha_struct *sas_ha);
void sas_shutdown_queue(struct sas_ha_struct *sas_ha);

void sas_deform_port(struct asd_sas_phy *phy);

void sas_porte_bytes_dmaed(void *);
void sas_porte_broadcast_rcvd(void *);
void sas_porte_link_reset_err(void *);
void sas_porte_timer_event(void *);
void sas_porte_hard_reset(void *);

int sas_notify_lldd_dev_found(struct domain_device *);
void sas_notify_lldd_dev_gone(struct domain_device *);

int sas_smp_phy_control(struct domain_device *dev, int phy_id,
			enum phy_func phy_func);
int sas_smp_get_phy_events(struct sas_phy *phy);

struct domain_device *sas_find_dev_by_rphy(struct sas_rphy *rphy);

void sas_hae_reset(void *);

static inline void sas_queue_event(int event, spinlock_t *lock,
				   unsigned long *pending,
				   struct work_struct *work,
				   struct Scsi_Host *shost)
{
	unsigned long flags;

	spin_lock_irqsave(lock, flags);
	if (test_bit(event, pending)) {
		spin_unlock_irqrestore(lock, flags);
		return;
	}
	__set_bit(event, pending);
	spin_unlock_irqrestore(lock, flags);
	scsi_queue_work(shost, work);
}

static inline void sas_begin_event(int event, spinlock_t *lock,
				   unsigned long *pending)
{
	unsigned long flags;

	spin_lock_irqsave(lock, flags);
	__clear_bit(event, pending);
	spin_unlock_irqrestore(lock, flags);
}

static inline void sas_fill_in_rphy(struct domain_device *dev,
				    struct sas_rphy *rphy)
{
	rphy->identify.sas_address = SAS_ADDR(dev->sas_addr);
	rphy->identify.initiator_port_protocols = dev->iproto;
	rphy->identify.target_port_protocols = dev->tproto;
	switch (dev->dev_type) {
	case SATA_DEV:
		/* FIXME: need sata device type */
	case SAS_END_DEV:
		rphy->identify.device_type = SAS_END_DEVICE;
		break;
	case EDGE_DEV:
		rphy->identify.device_type = SAS_EDGE_EXPANDER_DEVICE;
		break;
	case FANOUT_DEV:
		rphy->identify.device_type = SAS_FANOUT_EXPANDER_DEVICE;
		break;
	default:
		rphy->identify.device_type = SAS_PHY_UNUSED;
		break;
	}
}

static inline void sas_add_parent_port(struct domain_device *dev, int phy_id)
{
	struct expander_device *ex = &dev->ex_dev;
	struct ex_phy *ex_phy = &ex->ex_phy[phy_id];

	if (!ex->parent_port) {
		ex->parent_port = sas_port_alloc(&dev->rphy->dev, phy_id);
		/* FIXME: error handling */
		BUG_ON(!ex->parent_port);
		BUG_ON(sas_port_add(ex->parent_port));
		sas_port_mark_backlink(ex->parent_port);
	}
	sas_port_add_phy(ex->parent_port, ex_phy->phy);
}

#endif /* _SAS_INTERNAL_H_ */