Gitiles
Code Review Sign In
gerrit-public.fairphone.software / kernel / msm-4.19 / 8eec4b3117405e5561d2c65c9222cf3334c0ca3a / . / arch / arm / boot / dts / imx28-cfa10049.dts
blob: a34676f9f401d2f47b71b211cff973c30a781f10 [file] [log] [blame]
Maxime Riparddb84c032012-08-31 16:00:41 +0200[diff] [blame]1/*
2 * Copyright 2012 Free Electrons
3 *
4 * The code contained herein is licensed under the GNU General Public
5 * License. You may obtain a copy of the GNU General Public License
6 * Version 2 or later at the following locations:
7 *
8 * http://www.opensource.org/licenses/gpl-license.html
9 * http://www.gnu.org/copyleft/gpl.html
10 */
11
12/*
13 * The CFA-10049 is an expansion board for the CFA-10036 module, thus we
14 * need to include the CFA-10036 DTS.
15 */
16/include/ "imx28-cfa10036.dts"
17
18/ {
19 model = "Crystalfontz CFA-10049 Board";
20 compatible = "crystalfontz,cfa10049", "crystalfontz,cfa10036", "fsl,imx28";
21
22 apb@80000000 {
Maxime Ripard223d1f92012-09-04 10:44:03 +0200[diff] [blame]23 apbh@80000000 {
24 pinctrl@80018000 {
25 spi3_pins_cfa10049: spi3-cfa10049@0 {
26 reg = <0>;
27 fsl,pinmux-ids = <
28 0x0181 /* MX28_PAD_GPMI_RDN__SSP3_SCK */
29 0x01c1 /* MX28_PAD_GPMI_RESETN__SSP3_CMD */
Maxime Ripard13b45692012-09-10 22:35:41 +0200[diff] [blame]30 0x0111 /* MX28_PAD_GPMI_CE1N__SSP3_D3 */
31 0x01a2 /* MX28_PAD_GPMI_ALE__SSP3_D4 */
Maxime Ripard223d1f92012-09-04 10:44:03 +0200[diff] [blame]32 >;
33 fsl,drive-strength = <1>;
34 fsl,voltage = <1>;
35 fsl,pull-up = <1>;
36 };
37 };
38
39 ssp3: ssp@80016000 {
40 compatible = "fsl,imx28-spi";
41 pinctrl-names = "default";
42 pinctrl-0 = <&spi3_pins_cfa10049>;
43 status = "okay";
Maxime Ripard13b45692012-09-10 22:35:41 +0200[diff] [blame]44
45 gpio5: gpio5@0 {
46 compatible = "fairchild,74hc595";
47 gpio-controller;
48 #gpio-cells = <2>;
49 reg = <0>;
50 registers-number = <2>;
51 spi-max-frequency = <100000>;
52 };
53
54 gpio6: gpio6@1 {
55 compatible = "fairchild,74hc595";
56 gpio-controller;
57 #gpio-cells = <2>;
58 reg = <1>;
59 registers-number = <4>;
60 spi-max-frequency = <100000>;
61 };
62
Maxime Ripard223d1f92012-09-04 10:44:03 +0200[diff] [blame]63 };
64 };
65
Maxime Riparddb84c032012-08-31 16:00:41 +0200[diff] [blame]66 apbx@80040000 {
67 i2c1: i2c@8005a000 {
68 pinctrl-names = "default";
69 pinctrl-0 = <&i2c1_pins_a>;
70 status = "okay";
71 };
Maxime Ripard186e3d92012-09-03 16:15:25 +0200[diff] [blame]72
73 usbphy1: usbphy@8007e000 {
74 status = "okay";
75 };
76 };
77 };
78
79 ahb@80080000 {
80 usb1: usb@80090000 {
81 vbus-supply = <&reg_usb1_vbus>;
82 pinctrl-0 = <&usbphy1_pins_a>;
83 pinctrl-names = "default";
84 status = "okay";
85 };
86 };
87
88 regulators {
89 compatible = "simple-bus";
90
91 reg_usb1_vbus: usb1_vbus {
92 compatible = "regulator-fixed";
93 regulator-name = "usb1_vbus";
94 regulator-min-microvolt = <5000000>;
95 regulator-max-microvolt = <5000000>;
96 gpio = <&gpio0 7 1>;
Maxime Riparddb84c032012-08-31 16:00:41 +0200[diff] [blame]97 };
98 };
Maxime Ripard8eec4b32012-10-07 10:36:28 +0800[diff] [blame^]99
100 ahb@80080000 {
101 mac0: ethernet@800f0000 {
102 phy-mode = "rmii";
103 pinctrl-names = "default";
104 pinctrl-0 = <&mac0_pins_a>;
105 phy-reset-gpios = <&gpio2 21 0>;
106 phy-reset-duration = <100>;
107 status = "okay";
108 };
109 };
Maxime Riparddb84c032012-08-31 16:00:41 +0200[diff] [blame]110};