Sergey Matyukevich | 918d7b7 | 2009-06-19 08:27:40 +0400 | [diff] [blame^] | 1 | /* |
| 2 | * PATA driver for AT91SAM9260 Static Memory Controller |
| 3 | * with CompactFlash interface in True IDE mode |
| 4 | * |
| 5 | * Copyright (C) 2009 Matyukevich Sergey |
| 6 | * |
| 7 | * Based on: |
| 8 | * * generic platform driver by Paul Mundt: drivers/ata/pata_platform.c |
| 9 | * * pata_at32 driver by Kristoffer Nyborg Gregertsen |
| 10 | * * at91_ide driver by Stanislaw Gruszka |
| 11 | * |
| 12 | * This program is free software; you can redistribute it and/or modify it |
| 13 | * under the terms of the GNU General Public License version 2 |
| 14 | * as published by the Free Software Foundation. |
| 15 | * |
| 16 | */ |
| 17 | |
| 18 | #include <linux/kernel.h> |
| 19 | #include <linux/module.h> |
| 20 | #include <linux/init.h> |
| 21 | #include <linux/blkdev.h> |
| 22 | #include <scsi/scsi_host.h> |
| 23 | #include <linux/ata.h> |
| 24 | #include <linux/clk.h> |
| 25 | #include <linux/libata.h> |
| 26 | #include <linux/platform_device.h> |
| 27 | #include <linux/ata_platform.h> |
| 28 | |
| 29 | #include <mach/at91sam9260_matrix.h> |
| 30 | #include <mach/at91sam9_smc.h> |
| 31 | #include <mach/at91sam9260.h> |
| 32 | #include <mach/board.h> |
| 33 | #include <mach/gpio.h> |
| 34 | |
| 35 | |
| 36 | #define DRV_NAME "pata_at91" |
| 37 | #define DRV_VERSION "0.1" |
| 38 | |
| 39 | #define CF_IDE_OFFSET 0x00c00000 |
| 40 | #define CF_ALT_IDE_OFFSET 0x00e00000 |
| 41 | #define CF_IDE_RES_SIZE 0x08 |
| 42 | |
| 43 | struct at91_ide_info { |
| 44 | unsigned long mode; |
| 45 | unsigned int cs; |
| 46 | |
| 47 | void __iomem *ide_addr; |
| 48 | void __iomem *alt_addr; |
| 49 | }; |
| 50 | |
| 51 | const struct ata_timing initial_timing = |
| 52 | {XFER_PIO_0, 70, 290, 240, 600, 165, 150, 600, 0}; |
| 53 | |
| 54 | static unsigned int calc_mck_cycles(unsigned int ns, unsigned int mck_hz) |
| 55 | { |
| 56 | unsigned long mul; |
| 57 | |
| 58 | /* |
| 59 | * cycles = x [nsec] * f [Hz] / 10^9 [ns in sec] = |
| 60 | * x * (f / 1_000_000_000) = |
| 61 | * x * ((f * 65536) / 1_000_000_000) / 65536 = |
| 62 | * x * (((f / 10_000) * 65536) / 100_000) / 65536 = |
| 63 | */ |
| 64 | |
| 65 | mul = (mck_hz / 10000) << 16; |
| 66 | mul /= 100000; |
| 67 | |
| 68 | return (ns * mul + 65536) >> 16; /* rounding */ |
| 69 | } |
| 70 | |
| 71 | static void set_smc_mode(struct at91_ide_info *info) |
| 72 | { |
| 73 | at91_sys_write(AT91_SMC_MODE(info->cs), info->mode); |
| 74 | return; |
| 75 | } |
| 76 | |
| 77 | static void set_smc_timing(struct device *dev, |
| 78 | struct at91_ide_info *info, const struct ata_timing *ata) |
| 79 | { |
| 80 | int read_cycle, write_cycle, active, recover; |
| 81 | int nrd_setup, nrd_pulse, nrd_recover; |
| 82 | int nwe_setup, nwe_pulse; |
| 83 | |
| 84 | int ncs_write_setup, ncs_write_pulse; |
| 85 | int ncs_read_setup, ncs_read_pulse; |
| 86 | |
| 87 | unsigned int mck_hz; |
| 88 | struct clk *mck; |
| 89 | |
| 90 | read_cycle = ata->cyc8b; |
| 91 | nrd_setup = ata->setup; |
| 92 | nrd_pulse = ata->act8b; |
| 93 | nrd_recover = ata->rec8b; |
| 94 | |
| 95 | mck = clk_get(NULL, "mck"); |
| 96 | BUG_ON(IS_ERR(mck)); |
| 97 | mck_hz = clk_get_rate(mck); |
| 98 | |
| 99 | read_cycle = calc_mck_cycles(read_cycle, mck_hz); |
| 100 | nrd_setup = calc_mck_cycles(nrd_setup, mck_hz); |
| 101 | nrd_pulse = calc_mck_cycles(nrd_pulse, mck_hz); |
| 102 | nrd_recover = calc_mck_cycles(nrd_recover, mck_hz); |
| 103 | |
| 104 | clk_put(mck); |
| 105 | |
| 106 | active = nrd_setup + nrd_pulse; |
| 107 | recover = read_cycle - active; |
| 108 | |
| 109 | /* Need at least two cycles recovery */ |
| 110 | if (recover < 2) |
| 111 | read_cycle = active + 2; |
| 112 | |
| 113 | /* (CS0, CS1, DIR, OE) <= (CFCE1, CFCE2, CFRNW, NCSX) timings */ |
| 114 | ncs_read_setup = 1; |
| 115 | ncs_read_pulse = read_cycle - 2; |
| 116 | |
| 117 | /* Write timings same as read timings */ |
| 118 | write_cycle = read_cycle; |
| 119 | nwe_setup = nrd_setup; |
| 120 | nwe_pulse = nrd_pulse; |
| 121 | ncs_write_setup = ncs_read_setup; |
| 122 | ncs_write_pulse = ncs_read_pulse; |
| 123 | |
| 124 | dev_dbg(dev, "ATA timings: nrd_setup = %d nrd_pulse = %d nrd_cycle = %d\n", |
| 125 | nrd_setup, nrd_pulse, read_cycle); |
| 126 | dev_dbg(dev, "ATA timings: nwe_setup = %d nwe_pulse = %d nwe_cycle = %d\n", |
| 127 | nwe_setup, nwe_pulse, write_cycle); |
| 128 | dev_dbg(dev, "ATA timings: ncs_read_setup = %d ncs_read_pulse = %d\n", |
| 129 | ncs_read_setup, ncs_read_pulse); |
| 130 | dev_dbg(dev, "ATA timings: ncs_write_setup = %d ncs_write_pulse = %d\n", |
| 131 | ncs_write_setup, ncs_write_pulse); |
| 132 | |
| 133 | at91_sys_write(AT91_SMC_SETUP(info->cs), |
| 134 | AT91_SMC_NWESETUP_(nwe_setup) | |
| 135 | AT91_SMC_NRDSETUP_(nrd_setup) | |
| 136 | AT91_SMC_NCS_WRSETUP_(ncs_write_setup) | |
| 137 | AT91_SMC_NCS_RDSETUP_(ncs_read_setup)); |
| 138 | |
| 139 | at91_sys_write(AT91_SMC_PULSE(info->cs), |
| 140 | AT91_SMC_NWEPULSE_(nwe_pulse) | |
| 141 | AT91_SMC_NRDPULSE_(nrd_pulse) | |
| 142 | AT91_SMC_NCS_WRPULSE_(ncs_write_pulse) | |
| 143 | AT91_SMC_NCS_RDPULSE_(ncs_read_pulse)); |
| 144 | |
| 145 | at91_sys_write(AT91_SMC_CYCLE(info->cs), |
| 146 | AT91_SMC_NWECYCLE_(write_cycle) | |
| 147 | AT91_SMC_NRDCYCLE_(read_cycle)); |
| 148 | |
| 149 | return; |
| 150 | } |
| 151 | |
| 152 | static void pata_at91_set_piomode(struct ata_port *ap, struct ata_device *adev) |
| 153 | { |
| 154 | struct at91_ide_info *info = ap->host->private_data; |
| 155 | struct ata_timing timing; |
| 156 | int ret; |
| 157 | |
| 158 | /* Compute ATA timing and set it to SMC */ |
| 159 | ret = ata_timing_compute(adev, adev->pio_mode, &timing, 1000, 0); |
| 160 | if (ret) { |
| 161 | dev_warn(ap->dev, "Failed to compute ATA timing %d, \ |
| 162 | set PIO_0 timing\n", ret); |
| 163 | set_smc_timing(ap->dev, info, &initial_timing); |
| 164 | } else { |
| 165 | set_smc_timing(ap->dev, info, &timing); |
| 166 | } |
| 167 | |
| 168 | /* Setup SMC mode */ |
| 169 | set_smc_mode(info); |
| 170 | |
| 171 | return; |
| 172 | } |
| 173 | |
| 174 | static unsigned int pata_at91_data_xfer_noirq(struct ata_device *dev, |
| 175 | unsigned char *buf, unsigned int buflen, int rw) |
| 176 | { |
| 177 | struct at91_ide_info *info = dev->link->ap->host->private_data; |
| 178 | unsigned int consumed; |
| 179 | unsigned long flags; |
| 180 | unsigned int mode; |
| 181 | |
| 182 | local_irq_save(flags); |
| 183 | mode = at91_sys_read(AT91_SMC_MODE(info->cs)); |
| 184 | |
| 185 | /* set 16bit mode before writing data */ |
| 186 | at91_sys_write(AT91_SMC_MODE(info->cs), |
| 187 | (mode & ~AT91_SMC_DBW) | AT91_SMC_DBW_16); |
| 188 | |
| 189 | consumed = ata_sff_data_xfer(dev, buf, buflen, rw); |
| 190 | |
| 191 | /* restore 8bit mode after data is written */ |
| 192 | at91_sys_write(AT91_SMC_MODE(info->cs), |
| 193 | (mode & ~AT91_SMC_DBW) | AT91_SMC_DBW_8); |
| 194 | |
| 195 | local_irq_restore(flags); |
| 196 | return consumed; |
| 197 | } |
| 198 | |
| 199 | static struct scsi_host_template pata_at91_sht = { |
| 200 | ATA_PIO_SHT(DRV_NAME), |
| 201 | }; |
| 202 | |
| 203 | static struct ata_port_operations pata_at91_port_ops = { |
| 204 | .inherits = &ata_sff_port_ops, |
| 205 | |
| 206 | .sff_data_xfer = pata_at91_data_xfer_noirq, |
| 207 | .set_piomode = pata_at91_set_piomode, |
| 208 | .cable_detect = ata_cable_40wire, |
| 209 | .port_start = ATA_OP_NULL, |
| 210 | }; |
| 211 | |
| 212 | static int __devinit pata_at91_probe(struct platform_device *pdev) |
| 213 | { |
| 214 | struct at91_cf_data *board = pdev->dev.platform_data; |
| 215 | struct device *dev = &pdev->dev; |
| 216 | struct at91_ide_info *info; |
| 217 | struct resource *mem_res; |
| 218 | struct ata_host *host; |
| 219 | struct ata_port *ap; |
| 220 | int irq_flags = 0; |
| 221 | int irq = 0; |
| 222 | int ret; |
| 223 | |
| 224 | /* get platform resources: IO/CTL memories and irq/rst pins */ |
| 225 | |
| 226 | if (pdev->num_resources != 1) { |
| 227 | dev_err(&pdev->dev, "invalid number of resources\n"); |
| 228 | return -EINVAL; |
| 229 | } |
| 230 | |
| 231 | mem_res = platform_get_resource(pdev, IORESOURCE_MEM, 0); |
| 232 | |
| 233 | if (!mem_res) { |
| 234 | dev_err(dev, "failed to get mem resource\n"); |
| 235 | return -EINVAL; |
| 236 | } |
| 237 | |
| 238 | irq = board->irq_pin; |
| 239 | |
| 240 | /* init ata host */ |
| 241 | |
| 242 | host = ata_host_alloc(dev, 1); |
| 243 | |
| 244 | if (!host) |
| 245 | return -ENOMEM; |
| 246 | |
| 247 | ap = host->ports[0]; |
| 248 | ap->ops = &pata_at91_port_ops; |
| 249 | ap->flags |= ATA_FLAG_SLAVE_POSS; |
| 250 | ap->pio_mask = ATA_PIO4; |
| 251 | |
| 252 | if (!irq) { |
| 253 | ap->flags |= ATA_FLAG_PIO_POLLING; |
| 254 | ata_port_desc(ap, "no IRQ, using PIO polling"); |
| 255 | } |
| 256 | |
| 257 | info = kzalloc(sizeof(*info), GFP_KERNEL); |
| 258 | |
| 259 | if (!info) { |
| 260 | dev_err(dev, "failed to allocate memory for private data\n"); |
| 261 | return -ENOMEM; |
| 262 | } |
| 263 | |
| 264 | info->cs = board->chipselect; |
| 265 | info->mode = AT91_SMC_READMODE | AT91_SMC_WRITEMODE | |
| 266 | AT91_SMC_EXNWMODE_READY | AT91_SMC_BAT_SELECT | |
| 267 | AT91_SMC_DBW_8 | AT91_SMC_TDF_(0); |
| 268 | |
| 269 | info->ide_addr = devm_ioremap(dev, |
| 270 | mem_res->start + CF_IDE_OFFSET, CF_IDE_RES_SIZE); |
| 271 | |
| 272 | if (!info->ide_addr) { |
| 273 | dev_err(dev, "failed to map IO base\n"); |
| 274 | ret = -ENOMEM; |
| 275 | goto err_ide_ioremap; |
| 276 | } |
| 277 | |
| 278 | info->alt_addr = devm_ioremap(dev, |
| 279 | mem_res->start + CF_ALT_IDE_OFFSET, CF_IDE_RES_SIZE); |
| 280 | |
| 281 | if (!info->alt_addr) { |
| 282 | dev_err(dev, "failed to map CTL base\n"); |
| 283 | ret = -ENOMEM; |
| 284 | goto err_alt_ioremap; |
| 285 | } |
| 286 | |
| 287 | ap->ioaddr.cmd_addr = info->ide_addr; |
| 288 | ap->ioaddr.ctl_addr = info->alt_addr + 0x06; |
| 289 | ap->ioaddr.altstatus_addr = ap->ioaddr.ctl_addr; |
| 290 | |
| 291 | ata_sff_std_ports(&ap->ioaddr); |
| 292 | |
| 293 | ata_port_desc(ap, "mmio cmd 0x%llx ctl 0x%llx", |
| 294 | (unsigned long long)mem_res->start + CF_IDE_OFFSET, |
| 295 | (unsigned long long)mem_res->start + CF_ALT_IDE_OFFSET); |
| 296 | |
| 297 | host->private_data = info; |
| 298 | |
| 299 | return ata_host_activate(host, irq ? gpio_to_irq(irq) : 0, |
| 300 | irq ? ata_sff_interrupt : NULL, |
| 301 | irq_flags, &pata_at91_sht); |
| 302 | |
| 303 | err_alt_ioremap: |
| 304 | devm_iounmap(dev, info->ide_addr); |
| 305 | |
| 306 | err_ide_ioremap: |
| 307 | kfree(info); |
| 308 | |
| 309 | return ret; |
| 310 | } |
| 311 | |
| 312 | static int __devexit pata_at91_remove(struct platform_device *pdev) |
| 313 | { |
| 314 | struct ata_host *host = dev_get_drvdata(&pdev->dev); |
| 315 | struct at91_ide_info *info = host->private_data; |
| 316 | struct device *dev = &pdev->dev; |
| 317 | |
| 318 | if (!host) |
| 319 | return 0; |
| 320 | |
| 321 | ata_host_detach(host); |
| 322 | |
| 323 | if (!info) |
| 324 | return 0; |
| 325 | |
| 326 | devm_iounmap(dev, info->ide_addr); |
| 327 | devm_iounmap(dev, info->alt_addr); |
| 328 | |
| 329 | kfree(info); |
| 330 | return 0; |
| 331 | } |
| 332 | |
| 333 | static struct platform_driver pata_at91_driver = { |
| 334 | .probe = pata_at91_probe, |
| 335 | .remove = __devexit_p(pata_at91_remove), |
| 336 | .driver = { |
| 337 | .name = DRV_NAME, |
| 338 | .owner = THIS_MODULE, |
| 339 | }, |
| 340 | }; |
| 341 | |
| 342 | static int __init pata_at91_init(void) |
| 343 | { |
| 344 | return platform_driver_register(&pata_at91_driver); |
| 345 | } |
| 346 | |
| 347 | static void __exit pata_at91_exit(void) |
| 348 | { |
| 349 | platform_driver_unregister(&pata_at91_driver); |
| 350 | } |
| 351 | |
| 352 | |
| 353 | module_init(pata_at91_init); |
| 354 | module_exit(pata_at91_exit); |
| 355 | |
| 356 | |
| 357 | MODULE_LICENSE("GPL"); |
| 358 | MODULE_DESCRIPTION("Driver for CF in True IDE mode on AT91SAM9260 SoC"); |
| 359 | MODULE_AUTHOR("Matyukevich Sergey"); |
| 360 | MODULE_VERSION(DRV_VERSION); |
| 361 | |