Gitiles
Code Review Sign In
gerrit-public.fairphone.software / kernel / msm-4.19 / 94a1bbf85ac6d49d1e1452c8f8fe4db20e48d139 / . / arch / arm / boot / dts / at91sam9261.dtsi
blob: e21dda0e8986574b2531c1675eca1b4de164822d [file] [log] [blame]
Jean-Jacques Hiblot360ccb32014-03-03 11:05:57 +0100[diff] [blame]1/*
2 * at91sam9261.dtsi - Device Tree Include file for AT91SAM9261 SoC
3 *
4 * Copyright (C) 2013 Jean-Jacques Hiblot <jjhiblot@traphandler.com>
5 *
6 * Licensed under GPLv2 only.
7 */
8
9#include "skeleton.dtsi"
10#include <dt-bindings/pinctrl/at91.h>
11#include <dt-bindings/interrupt-controller/irq.h>
12#include <dt-bindings/gpio/gpio.h>
13#include <dt-bindings/clk/at91.h>
14
15/ {
16 model = "Atmel AT91SAM9261 family SoC";
17 compatible = "atmel,at91sam9261";
18 interrupt-parent = <&aic>;
19
20 aliases {
21 serial0 = &dbgu;
22 serial1 = &usart0;
23 serial2 = &usart1;
24 serial3 = &usart2;
25 gpio0 = &pioA;
26 gpio1 = &pioB;
27 gpio2 = &pioC;
28 tcb0 = &tcb0;
29 i2c0 = &i2c0;
30 ssc0 = &ssc0;
31 ssc1 = &ssc1;
32 };
33
34 cpus {
35 #address-cells = <0>;
36 #size-cells = <0>;
37
38 cpu {
39 compatible = "arm,arm926ej-s";
40 device_type = "cpu";
41 };
42 };
43
44 memory {
45 reg = <0x20000000 0x08000000>;
46 };
47
48 ahb {
49 compatible = "simple-bus";
50 #address-cells = <1>;
51 #size-cells = <1>;
52 ranges;
53
54 usb0: ohci@00500000 {
55 compatible = "atmel,at91rm9200-ohci", "usb-ohci";
56 reg = <0x00500000 0x100000>;
57 interrupts = <20 IRQ_TYPE_LEVEL_HIGH 2>;
58 clocks = <&usb>, <&ohci_clk>, <&hclk0>, <&uhpck>;
59 clock-names = "usb_clk", "ohci_clk", "hclk", "uhpck";
60 status = "disabled";
61 };
62
63 fb0: fb@0x00600000 {
64 compatible = "atmel,at91sam9261-lcdc";
65 reg = <0x00600000 0x1000>;
66 interrupts = <21 IRQ_TYPE_LEVEL_HIGH 3>;
67 pinctrl-names = "default";
68 pinctrl-0 = <&pinctrl_fb>;
69 clocks = <&lcd_clk>, <&hclk1>;
70 clock-names = "lcdc_clk", "hclk";
71 status = "disabled";
72 };
73
74 nand0: nand@40000000 {
75 compatible = "atmel,at91rm9200-nand";
76 #address-cells = <1>;
77 #size-cells = <1>;
78 reg = <0x40000000 0x10000000>;
79 atmel,nand-addr-offset = <22>;
80 atmel,nand-cmd-offset = <21>;
81 pinctrl-names = "default";
82 pinctrl-0 = <&pinctrl_nand>;
83
84 gpios = <&pioC 15 GPIO_ACTIVE_HIGH>,
85 <&pioC 14 GPIO_ACTIVE_HIGH>,
86 <0>;
87 status = "disabled";
88 };
89
90 apb {
91 compatible = "simple-bus";
92 #address-cells = <1>;
93 #size-cells = <1>;
94 ranges;
95
96 tcb0: timer@fffa0000 {
97 compatible = "atmel,at91rm9200-tcb";
98 reg = <0xfffa0000 0x100>;
99 interrupts = <17 IRQ_TYPE_LEVEL_HIGH 0>,
100 <18 IRQ_TYPE_LEVEL_HIGH 0>,
101 <19 IRQ_TYPE_LEVEL_HIGH 0>;
102 clocks = <&tc0_clk>, <&tc1_clk>, <&tc2_clk>;
103 clock-names = "t0_clk", "t1_clk", "t2_clk";
104 };
105
106 usb1: gadget@fffa4000 {
107 compatible = "atmel,at91rm9200-udc";
108 reg = <0xfffa4000 0x4000>;
109 interrupts = <10 IRQ_TYPE_LEVEL_HIGH 2>;
110 clocks = <&usb>, <&udc_clk>, <&udpck>;
111 clock-names = "usb_clk", "udc_clk", "udpck";
112 status = "disabled";
113 };
114
115 mmc0: mmc@fffa8000 {
116 compatible = "atmel,hsmci";
117 reg = <0xfffa8000 0x600>;
118 interrupts = <9 IRQ_TYPE_LEVEL_HIGH 0>;
119 pinctrl-names = "default";
120 pinctrl-0 = <&pinctrl_mmc0_clk>, <&pinctrl_mmc0_slot0_cmd_dat0>, <&pinctrl_mmc0_slot0_dat1_3>;
121 #address-cells = <1>;
122 #size-cells = <0>;
123 clocks = <&mci0_clk>;
124 clock-names = "mci_clk";
125 status = "disabled";
126 };
127
128 i2c0: i2c@fffac000 {
129 compatible = "atmel,at91sam9261-i2c";
130 pinctrl-names = "default";
131 pinctrl-0 = <&pinctrl_i2c_twi>;
132 reg = <0xfffac000 0x100>;
133 interrupts = <11 IRQ_TYPE_LEVEL_HIGH 6>;
134 #address-cells = <1>;
135 #size-cells = <0>;
136 clocks = <&twi0_clk>;
137 status = "disabled";
138 };
139
140 usart0: serial@fffb0000 {
141 compatible = "atmel,at91sam9260-usart";
142 reg = <0xfffb0000 0x200>;
143 interrupts = <6 IRQ_TYPE_LEVEL_HIGH 5>;
144 atmel,use-dma-rx;
145 atmel,use-dma-tx;
146 pinctrl-names = "default";
147 pinctrl-0 = <&pinctrl_usart0>;
148 clocks = <&usart0_clk>;
149 clock-names = "usart";
150 status = "disabled";
151 };
152
153 usart1: serial@fffb4000 {
154 compatible = "atmel,at91sam9260-usart";
155 reg = <0xfffb4000 0x200>;
156 interrupts = <7 IRQ_TYPE_LEVEL_HIGH 5>;
157 atmel,use-dma-rx;
158 atmel,use-dma-tx;
159 pinctrl-names = "default";
160 pinctrl-0 = <&pinctrl_usart1>;
161 clocks = <&usart1_clk>;
162 clock-names = "usart";
163 status = "disabled";
164 };
165
166 usart2: serial@fffb8000{
167 compatible = "atmel,at91sam9260-usart";
168 reg = <0xfffb8000 0x200>;
169 interrupts = <8 IRQ_TYPE_LEVEL_HIGH 5>;
170 atmel,use-dma-rx;
171 atmel,use-dma-tx;
172 pinctrl-names = "default";
173 pinctrl-0 = <&pinctrl_usart2>;
174 clocks = <&usart2_clk>;
175 clock-names = "usart";
176 status = "disabled";
177 };
178
179 ssc0: ssc@fffbc000 {
180 compatible = "atmel,at91rm9200-ssc";
181 reg = <0xfffbc000 0x4000>;
182 interrupts = <14 IRQ_TYPE_LEVEL_HIGH 5>;
183 pinctrl-names = "default";
184 pinctrl-0 = <&pinctrl_ssc0_tx &pinctrl_ssc0_rx>;
185 status = "disabled";
186 };
187
188 ssc1: ssc@fffc0000 {
189 compatible = "atmel,at91rm9200-ssc";
190 reg = <0xfffc0000 0x4000>;
191 interrupts = <15 IRQ_TYPE_LEVEL_HIGH 5>;
192 pinctrl-names = "default";
193 pinctrl-0 = <&pinctrl_ssc1_tx &pinctrl_ssc1_rx>;
194 status = "disabled";
195 };
196
197 spi0: spi@fffc8000 {
198 #address-cells = <1>;
199 #size-cells = <0>;
200 compatible = "atmel,at91rm9200-spi";
201 reg = <0xfffc8000 0x200>;
202 cs-gpios = <0>, <0>, <0>, <0>;
203 interrupts = <12 IRQ_TYPE_LEVEL_HIGH 3>;
204 pinctrl-names = "default";
205 pinctrl-0 = <&pinctrl_spi0>;
206 clocks = <&spi0_clk>;
207 clock-names = "spi_clk";
208 status = "disabled";
209 };
210
211 spi1: spi@fffcc000 {
212 #address-cells = <1>;
213 #size-cells = <0>;
214 compatible = "atmel,at91rm9200-spi";
215 reg = <0xfffcc000 0x200>;
216 interrupts = <13 IRQ_TYPE_LEVEL_HIGH 3>;
217 pinctrl-names = "default";
218 pinctrl-0 = <&pinctrl_spi1>;
219 clocks = <&spi1_clk>;
220 clock-names = "spi_clk";
221 status = "disabled";
222 };
223
224 ramc: ramc@ffffea00 {
225 compatible = "atmel,at91sam9260-sdramc";
226 reg = <0xffffea00 0x200>;
227 };
228
229 matrix: matrix@ffffee00 {
230 compatible = "atmel,at91sam9260-bus-matrix";
231 reg = <0xffffee00 0x200>;
232 };
233
234 aic: interrupt-controller@fffff000 {
235 #interrupt-cells = <3>;
236 compatible = "atmel,at91rm9200-aic";
237 interrupt-controller;
238 reg = <0xfffff000 0x200>;
239 atmel,external-irqs = <29 30 31>;
240 };
241
242 dbgu: serial@fffff200 {
243 compatible = "atmel,at91sam9260-usart";
244 reg = <0xfffff200 0x200>;
245 interrupts = <1 IRQ_TYPE_LEVEL_HIGH 7>;
246 pinctrl-names = "default";
247 pinctrl-0 = <&pinctrl_dbgu>;
248 clocks = <&mck>;
249 clock-names = "usart";
250 status = "disabled";
251 };
252
253 pinctrl@fffff400 {
254 #address-cells = <1>;
255 #size-cells = <1>;
256 compatible = "atmel,at91rm9200-pinctrl", "simple-bus";
257 ranges = <0xfffff400 0xfffff400 0x600>;
258
259 atmel,mux-mask =
260 /* A B */
261 <0xffffffff 0xfffffff7>, /* pioA */
262 <0xffffffff 0xfffffff4>, /* pioB */
263 <0xffffffff 0xffffff07>; /* pioC */
264
265 /* shared pinctrl settings */
266 dbgu {
267 pinctrl_dbgu: dbgu-0 {
268 atmel,pins =
269 <AT91_PIOA 9 AT91_PERIPH_A AT91_PINCTRL_NONE>,
270 <AT91_PIOA 10 AT91_PERIPH_A AT91_PINCTRL_PULL_UP>;
271 };
272 };
273
274 usart0 {
275 pinctrl_usart0: usart0-0 {
276 atmel,pins =
277 <AT91_PIOC 8 AT91_PERIPH_A AT91_PINCTRL_PULL_UP>,
278 <AT91_PIOC 9 AT91_PERIPH_A AT91_PINCTRL_NONE>;
279 };
280
281 pinctrl_usart0_rts: usart0_rts-0 {
282 atmel,pins =
283 <AT91_PIOC 10 AT91_PERIPH_A AT91_PINCTRL_NONE>;
284 };
285
286 pinctrl_usart0_cts: usart0_cts-0 {
287 atmel,pins =
288 <AT91_PIOC 11 AT91_PERIPH_A AT91_PINCTRL_NONE>;
289 };
290 };
291
292 usart1 {
293 pinctrl_usart1: usart1-0 {
294 atmel,pins =
295 <AT91_PIOC 12 AT91_PERIPH_A AT91_PINCTRL_PULL_UP>,
296 <AT91_PIOC 13 AT91_PERIPH_A AT91_PINCTRL_NONE>;
297 };
298
299 pinctrl_usart1_rts: usart1_rts-0 {
300 atmel,pins =
301 <AT91_PIOA 12 AT91_PERIPH_B AT91_PINCTRL_NONE>;
302 };
303
304 pinctrl_usart1_cts: usart1_cts-0 {
305 atmel,pins =
306 <AT91_PIOA 13 AT91_PERIPH_B AT91_PINCTRL_NONE>;
307 };
308 };
309
310 usart2 {
311 pinctrl_usart2: usart2-0 {
312 atmel,pins =
313 <AT91_PIOC 14 AT91_PERIPH_A AT91_PINCTRL_PULL_UP>,
314 <AT91_PIOC 15 AT91_PERIPH_A AT91_PINCTRL_NONE>;
315 };
316
317 pinctrl_usart2_rts: usart2_rts-0 {
318 atmel,pins =
319 <AT91_PIOA 15 AT91_PERIPH_B AT91_PINCTRL_NONE>;
320 };
321
322 pinctrl_usart2_cts: usart2_cts-0 {
323 atmel,pins =
324 <AT91_PIOA 16 AT91_PERIPH_B AT91_PINCTRL_NONE>;
325 };
326 };
327
328 nand {
329 pinctrl_nand: nand-0 {
330 atmel,pins =
331 <AT91_PIOC 15 AT91_PERIPH_GPIO AT91_PINCTRL_PULL_UP>,
332 <AT91_PIOC 14 AT91_PERIPH_GPIO AT91_PINCTRL_PULL_UP>;
333 };
334 };
335
336 mmc0 {
337 pinctrl_mmc0_clk: mmc0_clk-0 {
338 atmel,pins =
339 <AT91_PIOA 2 AT91_PERIPH_B AT91_PINCTRL_NONE>;
340 };
341
342 pinctrl_mmc0_slot0_cmd_dat0: mmc0_slot0_cmd_dat0-0 {
343 atmel,pins =
344 <AT91_PIOA 1 AT91_PERIPH_B AT91_PINCTRL_PULL_UP>,
345 <AT91_PIOA 0 AT91_PERIPH_B AT91_PINCTRL_PULL_UP>;
346 };
347
348 pinctrl_mmc0_slot0_dat1_3: mmc0_slot0_dat1_3-0 {
349 atmel,pins =
350 <AT91_PIOA 4 AT91_PERIPH_B AT91_PINCTRL_PULL_UP>,
351 <AT91_PIOA 5 AT91_PERIPH_B AT91_PINCTRL_PULL_UP>,
352 <AT91_PIOA 6 AT91_PERIPH_B AT91_PINCTRL_PULL_UP>;
353 };
354 };
355
356 ssc0 {
357 pinctrl_ssc0_tx: ssc0_tx-0 {
358 atmel,pins =
359 <AT91_PIOB 21 AT91_PERIPH_A AT91_PINCTRL_NONE>,
360 <AT91_PIOB 22 AT91_PERIPH_A AT91_PINCTRL_NONE>,
361 <AT91_PIOB 23 AT91_PERIPH_A AT91_PINCTRL_NONE>;
362 };
363
364 pinctrl_ssc0_rx: ssc0_rx-0 {
365 atmel,pins =
366 <AT91_PIOB 24 AT91_PERIPH_A AT91_PINCTRL_NONE>,
367 <AT91_PIOB 25 AT91_PERIPH_A AT91_PINCTRL_NONE>,
368 <AT91_PIOB 26 AT91_PERIPH_A AT91_PINCTRL_NONE>;
369 };
370 };
371
372 ssc1 {
373 pinctrl_ssc1_tx: ssc1_tx-0 {
374 atmel,pins =
375 <AT91_PIOA 17 AT91_PERIPH_B AT91_PINCTRL_NONE>,
376 <AT91_PIOA 18 AT91_PERIPH_B AT91_PINCTRL_NONE>,
377 <AT91_PIOA 19 AT91_PERIPH_B AT91_PINCTRL_NONE>;
378 };
379
380 pinctrl_ssc1_rx: ssc1_rx-0 {
381 atmel,pins =
382 <AT91_PIOA 20 AT91_PERIPH_B AT91_PINCTRL_NONE>,
383 <AT91_PIOA 21 AT91_PERIPH_B AT91_PINCTRL_NONE>,
384 <AT91_PIOA 22 AT91_PERIPH_B AT91_PINCTRL_NONE>;
385 };
386 };
387
388 spi0 {
389 pinctrl_spi0: spi0-0 {
390 atmel,pins =
391 <AT91_PIOA 0 AT91_PERIPH_A AT91_PINCTRL_NONE>,
392 <AT91_PIOA 1 AT91_PERIPH_A AT91_PINCTRL_NONE>,
393 <AT91_PIOA 2 AT91_PERIPH_A AT91_PINCTRL_NONE>;
394 };
395 };
396
397 spi1 {
398 pinctrl_spi1: spi1-0 {
399 atmel,pins =
400 <AT91_PIOB 30 AT91_PERIPH_A AT91_PINCTRL_NONE>,
401 <AT91_PIOB 31 AT91_PERIPH_A AT91_PINCTRL_NONE>,
402 <AT91_PIOB 29 AT91_PERIPH_A AT91_PINCTRL_NONE>;
403 };
404 };
405
406 tcb0 {
407 pinctrl_tcb0_tclk0: tcb0_tclk0-0 {
408 atmel,pins = <AT91_PIOC 16 AT91_PERIPH_B AT91_PINCTRL_NONE>;
409 };
410
411 pinctrl_tcb0_tclk1: tcb0_tclk1-0 {
412 atmel,pins = <AT91_PIOC 17 AT91_PERIPH_B AT91_PINCTRL_NONE>;
413 };
414
415 pinctrl_tcb0_tclk2: tcb0_tclk2-0 {
416 atmel,pins = <AT91_PIOC 18 AT91_PERIPH_B AT91_PINCTRL_NONE>;
417 };
418
419 pinctrl_tcb0_tioa0: tcb0_tioa0-0 {
420 atmel,pins = <AT91_PIOC 19 AT91_PERIPH_B AT91_PINCTRL_NONE>;
421 };
422
423 pinctrl_tcb0_tioa1: tcb0_tioa1-0 {
424 atmel,pins = <AT91_PIOC 21 AT91_PERIPH_B AT91_PINCTRL_NONE>;
425 };
426
427 pinctrl_tcb0_tioa2: tcb0_tioa2-0 {
428 atmel,pins = <AT91_PIOC 23 AT91_PERIPH_B AT91_PINCTRL_NONE>;
429 };
430
431 pinctrl_tcb0_tiob0: tcb0_tiob0-0 {
432 atmel,pins = <AT91_PIOC 20 AT91_PERIPH_B AT91_PINCTRL_NONE>;
433 };
434
435 pinctrl_tcb0_tiob1: tcb0_tiob1-0 {
436 atmel,pins = <AT91_PIOC 22 AT91_PERIPH_B AT91_PINCTRL_NONE>;
437 };
438
439 pinctrl_tcb0_tiob2: tcb0_tiob2-0 {
440 atmel,pins = <AT91_PIOC 24 AT91_PERIPH_B AT91_PINCTRL_NONE>;
441 };
442 };
443
444 i2c0 {
445 pinctrl_i2c_bitbang: i2c-0-bitbang {
446 atmel,pins =
447 <AT91_PIOA 7 AT91_PERIPH_GPIO AT91_PINCTRL_NONE>,
448 <AT91_PIOA 8 AT91_PERIPH_GPIO AT91_PINCTRL_NONE>;
449 };
450 pinctrl_i2c_twi: i2c-0-twi {
451 atmel,pins =
452 <AT91_PIOA 7 AT91_PERIPH_A AT91_PINCTRL_NONE>,
453 <AT91_PIOA 8 AT91_PERIPH_A AT91_PINCTRL_NONE>;
454 };
455 };
456
457 fb {
458 pinctrl_fb: fb-0 {
459 atmel,pins =
460 <AT91_PIOB 1 AT91_PERIPH_A AT91_PINCTRL_NONE>,
461 <AT91_PIOB 2 AT91_PERIPH_A AT91_PINCTRL_NONE>,
462 <AT91_PIOB 3 AT91_PERIPH_A AT91_PINCTRL_NONE>,
463 <AT91_PIOB 7 AT91_PERIPH_A AT91_PINCTRL_NONE>,
464 <AT91_PIOB 8 AT91_PERIPH_A AT91_PINCTRL_NONE>,
465 <AT91_PIOB 9 AT91_PERIPH_A AT91_PINCTRL_NONE>,
466 <AT91_PIOB 10 AT91_PERIPH_A AT91_PINCTRL_NONE>,
467 <AT91_PIOB 11 AT91_PERIPH_A AT91_PINCTRL_NONE>,
468 <AT91_PIOB 12 AT91_PERIPH_A AT91_PINCTRL_NONE>,
469 <AT91_PIOB 15 AT91_PERIPH_A AT91_PINCTRL_NONE>,
470 <AT91_PIOB 16 AT91_PERIPH_A AT91_PINCTRL_NONE>,
471 <AT91_PIOB 17 AT91_PERIPH_A AT91_PINCTRL_NONE>,
472 <AT91_PIOB 18 AT91_PERIPH_A AT91_PINCTRL_NONE>,
473 <AT91_PIOB 19 AT91_PERIPH_A AT91_PINCTRL_NONE>,
474 <AT91_PIOB 20 AT91_PERIPH_A AT91_PINCTRL_NONE>,
475 <AT91_PIOB 23 AT91_PERIPH_B AT91_PINCTRL_NONE>,
476 <AT91_PIOB 24 AT91_PERIPH_B AT91_PINCTRL_NONE>,
477 <AT91_PIOB 25 AT91_PERIPH_B AT91_PINCTRL_NONE>,
478 <AT91_PIOB 26 AT91_PERIPH_B AT91_PINCTRL_NONE>,
479 <AT91_PIOB 27 AT91_PERIPH_B AT91_PINCTRL_NONE>,
480 <AT91_PIOB 28 AT91_PERIPH_B AT91_PINCTRL_NONE>;
481 };
482 };
483
484 pioA: gpio@fffff400 {
485 compatible = "atmel,at91rm9200-gpio";
486 reg = <0xfffff400 0x200>;
487 interrupts = <2 IRQ_TYPE_LEVEL_HIGH 1>;
488 #gpio-cells = <2>;
489 gpio-controller;
490 interrupt-controller;
491 #interrupt-cells = <2>;
492 clocks = <&pioA_clk>;
493 };
494
495 pioB: gpio@fffff600 {
496 compatible = "atmel,at91rm9200-gpio";
497 reg = <0xfffff600 0x200>;
498 interrupts = <3 IRQ_TYPE_LEVEL_HIGH 1>;
499 #gpio-cells = <2>;
500 gpio-controller;
501 interrupt-controller;
502 #interrupt-cells = <2>;
503 clocks = <&pioB_clk>;
504 };
505
506 pioC: gpio@fffff800 {
507 compatible = "atmel,at91rm9200-gpio";
508 reg = <0xfffff800 0x200>;
509 interrupts = <4 IRQ_TYPE_LEVEL_HIGH 1>;
510 #gpio-cells = <2>;
511 gpio-controller;
512 interrupt-controller;
513 #interrupt-cells = <2>;
514 clocks = <&pioC_clk>;
515 };
516 };
517
518 pmc: pmc@fffffc00 {
519 compatible = "atmel,at91rm9200-pmc";
520 reg = <0xfffffc00 0x100>;
521 interrupts = <1 IRQ_TYPE_LEVEL_HIGH 7>;
522 interrupt-controller;
523 #address-cells = <1>;
524 #size-cells = <0>;
525 #interrupt-cells = <1>;
526
527 clk32k: slck {
528 compatible = "fixed-clock";
529 #clock-cells = <0>;
530 clock-frequency = <32768>;
531 };
532
533 main: mainck {
534 compatible = "atmel,at91rm9200-clk-main";
535 #clock-cells = <0>;
536 interrupts-extended = <&pmc AT91_PMC_MOSCS>;
537 clocks = <&clk32k>;
538 };
539
540 plla: pllack {
541 compatible = "atmel,at91rm9200-clk-pll";
542 #clock-cells = <0>;
543 interrupts-extended = <&pmc AT91_PMC_LOCKA>;
544 clocks = <&main>;
545 reg = <0>;
546 atmel,clk-input-range = <1000000 32000000>;
547 #atmel,pll-clk-output-range-cells = <4>;
548 atmel,pll-clk-output-ranges = <80000000 200000000 190000000 240000000>;
549 };
550
551 pllb: pllbck {
552 compatible = "atmel,at91rm9200-clk-pll";
553 #clock-cells = <0>;
554 interrupts-extended = <&pmc AT91_PMC_LOCKB>;
555 clocks = <&main>;
556 reg = <1>;
557 atmel,clk-input-range = <1000000 32000000>;
558 #atmel,pll-clk-output-range-cells = <4>;
559 atmel,pll-clk-output-ranges = <80000000 200000000 190000000 240000000>;
560 };
561
562 mck: masterck {
563 compatible = "atmel,at91rm9200-clk-master";
564 #clock-cells = <0>;
565 interrupts-extended = <&pmc AT91_PMC_MCKRDY>;
566 clocks = <&clk32k>, <&main>, <&plla>, <&pllb>;
567 atmel,clk-output-range = <0 94000000>;
568 atmel,clk-divisors = <1 2 4 3>;
569 };
570
571 usb: usbck {
572 compatible = "atmel,at91rm9200-clk-usb";
573 #clock-cells = <0>;
574 atmel,clk-divisors = <1 2 4 3>;
575 clocks = <&pllb>;
576 };
577
578 systemck {
579 compatible = "atmel,at91rm9200-clk-system";
580 #address-cells = <1>;
581 #size-cells = <0>;
582
583 uhpck: uhpck {
584 #clock-cells = <0>;
585 reg = <6>;
586 clocks = <&usb>;
587 };
588
589 udpck: udpck {
590 #clock-cells = <0>;
591 reg = <7>;
592 clocks = <&usb>;
593 };
594
595 hclk0: hclk0 {
596 #clock-cells = <0>;
597 reg = <16>;
598 clocks = <&mck>;
599 };
600
601 hclk1: hclk1 {
602 #clock-cells = <0>;
603 reg = <17>;
604 clocks = <&mck>;
605 };
606 };
607
608 periphck {
609 compatible = "atmel,at91rm9200-clk-peripheral";
610 #address-cells = <1>;
611 #size-cells = <0>;
612 clocks = <&mck>;
613
614 pioA_clk: pioA_clk {
615 #clock-cells = <0>;
616 reg = <2>;
617 };
618
619 pioB_clk: pioB_clk {
620 #clock-cells = <0>;
621 reg = <3>;
622 };
623
624 pioC_clk: pioC_clk {
625 #clock-cells = <0>;
626 reg = <4>;
627 };
628
629 usart0_clk: usart0_clk {
630 #clock-cells = <0>;
631 reg = <6>;
632 };
633
634 usart1_clk: usart1_clk {
635 #clock-cells = <0>;
636 reg = <7>;
637 };
638
639 usart2_clk: usart2_clk {
640 #clock-cells = <0>;
641 reg = <8>;
642 };
643
644 mci0_clk: mci0_clk {
645 #clock-cells = <0>;
646 reg = <9>;
647 };
648
649 udc_clk: udc_clk {
650 #clock-cells = <0>;
651 reg = <10>;
652 };
653
654 twi0_clk: twi0_clk {
655 reg = <11>;
656 #clock-cells = <0>;
657 };
658
659 spi0_clk: spi0_clk {
660 #clock-cells = <0>;
661 reg = <12>;
662 };
663
664 spi1_clk: spi1_clk {
665 #clock-cells = <0>;
666 reg = <13>;
667 };
668
669 tc0_clk: tc0_clk {
670 #clock-cells = <0>;
671 reg = <17>;
672 };
673
674 tc1_clk: tc1_clk {
675 #clock-cells = <0>;
676 reg = <18>;
677 };
678
679 tc2_clk: tc2_clk {
680 #clock-cells = <0>;
681 reg = <19>;
682 };
683
684 ohci_clk: ohci_clk {
685 #clock-cells = <0>;
686 reg = <20>;
687 };
688
689 lcd_clk: lcd_clk {
690 #clock-cells = <0>;
691 reg = <21>;
692 };
693 };
694 };
695
696 rstc@fffffd00 {
697 compatible = "atmel,at91sam9260-rstc";
698 reg = <0xfffffd00 0x10>;
699 };
700
701 shdwc@fffffd10 {
702 compatible = "atmel,at91sam9260-shdwc";
703 reg = <0xfffffd10 0x10>;
704 };
705
706 pit: timer@fffffd30 {
707 compatible = "atmel,at91sam9260-pit";
708 reg = <0xfffffd30 0xf>;
709 interrupts = <1 IRQ_TYPE_LEVEL_HIGH 7>;
710 clocks = <&mck>;
711 };
712
713 watchdog@fffffd40 {
714 compatible = "atmel,at91sam9260-wdt";
715 reg = <0xfffffd40 0x10>;
716 interrupts = <1 IRQ_TYPE_LEVEL_HIGH 7>;
717 status = "disabled";
718 };
719 };
720 };
721
722 i2c@0 {
723 compatible = "i2c-gpio";
724 pinctrl-names = "default";
725 pinctrl-0 = <&pinctrl_i2c_bitbang>;
726 gpios = <&pioA 7 GPIO_ACTIVE_HIGH>, /* sda */
727 <&pioA 8 GPIO_ACTIVE_HIGH>; /* scl */
728 i2c-gpio,sda-open-drain;
729 i2c-gpio,scl-open-drain;
730 i2c-gpio,delay-us = <2>; /* ~100 kHz */
731 #address-cells = <1>;
732 #size-cells = <0>;
733 status = "disabled";
734 };
735};