blob: 865614b34d6fbb502625c1c1b917c0370bc78ca7 [file] [log] [blame]
Beniamino Galvani0b8eebc2014-07-05 15:20:56 +02001ACT88xx regulators
Wenyou Yangcbfadd32013-12-24 10:35:14 +08002-------------------
3
4Required properties:
Beniamino Galvani0b8eebc2014-07-05 15:20:56 +02005- compatible: "active-semi,act8846" or "active-semi,act8865"
Wenyou Yangcbfadd32013-12-24 10:35:14 +08006- reg: I2C slave address
7
8Any standard regulator properties can be used to configure the single regulator.
9
10The valid names for regulators are:
Beniamino Galvani0b8eebc2014-07-05 15:20:56 +020011 - for act8846:
12 REG1, REG2, REG3, REG4, REG5, REG6, REG7, REG8, REG9, REG10, REG11, REG12
13 - for act8865:
Wenyou Yangcbfadd32013-12-24 10:35:14 +080014 DCDC_REG1, DCDC_REG2, DCDC_REG3, LDO_REG1, LDO_REG2, LDO_REG3, LDO_REG4.
15
16Example:
17--------
18
19 i2c1: i2c@f0018000 {
20 pmic: act8865@5b {
21 compatible = "active-semi,act8865";
22 reg = <0x5b>;
23 status = "disabled";
24
25 regulators {
26 vcc_1v8_reg: DCDC_REG1 {
27 regulator-name = "VCC_1V8";
28 regulator-min-microvolt = <1800000>;
29 regulator-max-microvolt = <1800000>;
30 regulator-always-on;
31 };
32
33 vcc_1v2_reg: DCDC_REG2 {
34 regulator-name = "VCC_1V2";
35 regulator-min-microvolt = <1100000>;
36 regulator-max-microvolt = <1300000>;
37 regulator-suspend-mem-microvolt = <1150000>;
38 regulator-suspend-standby-microvolt = <1150000>;
39 regulator-always-on;
40 };
41
42 vcc_3v3_reg: DCDC_REG3 {
43 regulator-name = "VCC_3V3";
44 regulator-min-microvolt = <3300000>;
45 regulator-max-microvolt = <3300000>;
46 regulator-always-on;
47 };
48
49 vddana_reg: LDO_REG1 {
50 regulator-name = "VDDANA";
51 regulator-min-microvolt = <3300000>;
52 regulator-max-microvolt = <3300000>;
53 regulator-always-on;
54 };
55
56 vddfuse_reg: LDO_REG2 {
57 regulator-name = "FUSE_2V5";
58 regulator-min-microvolt = <2500000>;
59 regulator-max-microvolt = <2500000>;
60 };
61 };
62 };
63 };