James Ban | 1028a37 | 2014-07-14 13:48:45 +0900 | [diff] [blame] | 1 | /* |
| 2 | * da9211-regulator.c - Regulator device driver for DA9211 |
| 3 | * Copyright (C) 2014 Dialog Semiconductor Ltd. |
| 4 | * |
| 5 | * This library is free software; you can redistribute it and/or |
| 6 | * modify it under the terms of the GNU Library General Public |
| 7 | * License as published by the Free Software Foundation; either |
| 8 | * version 2 of the License, or (at your option) any later version. |
| 9 | * |
| 10 | * This library is distributed in the hope that it will be useful, |
| 11 | * but WITHOUT ANY WARRANTY; without even the implied warranty of |
| 12 | * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU |
| 13 | * Library General Public License for more details. |
| 14 | */ |
| 15 | |
| 16 | #include <linux/err.h> |
| 17 | #include <linux/gpio.h> |
| 18 | #include <linux/i2c.h> |
| 19 | #include <linux/module.h> |
| 20 | #include <linux/init.h> |
| 21 | #include <linux/slab.h> |
| 22 | #include <linux/regulator/driver.h> |
| 23 | #include <linux/regulator/machine.h> |
| 24 | #include <linux/regmap.h> |
| 25 | #include <linux/irq.h> |
| 26 | #include <linux/interrupt.h> |
| 27 | #include <linux/regulator/da9211.h> |
| 28 | #include "da9211-regulator.h" |
| 29 | |
| 30 | #define DA9211_BUCK_MODE_SLEEP 1 |
| 31 | #define DA9211_BUCK_MODE_SYNC 2 |
| 32 | #define DA9211_BUCK_MODE_AUTO 3 |
| 33 | |
| 34 | /* DA9211 REGULATOR IDs */ |
| 35 | #define DA9211_ID_BUCKA 0 |
| 36 | #define DA9211_ID_BUCKB 1 |
| 37 | |
| 38 | struct da9211 { |
| 39 | struct device *dev; |
| 40 | struct regmap *regmap; |
| 41 | struct da9211_pdata *pdata; |
| 42 | struct regulator_dev *rdev[DA9211_MAX_REGULATORS]; |
| 43 | int num_regulator; |
| 44 | int chip_irq; |
| 45 | }; |
| 46 | |
| 47 | static const struct regmap_range_cfg da9211_regmap_range[] = { |
| 48 | { |
| 49 | .selector_reg = DA9211_REG_PAGE_CON, |
| 50 | .selector_mask = DA9211_REG_PAGE_MASK, |
| 51 | .selector_shift = DA9211_REG_PAGE_SHIFT, |
| 52 | .window_start = 0, |
| 53 | .window_len = 256, |
| 54 | .range_min = 0, |
| 55 | .range_max = 2*256, |
| 56 | }, |
| 57 | }; |
| 58 | |
| 59 | static const struct regmap_config da9211_regmap_config = { |
| 60 | .reg_bits = 8, |
| 61 | .val_bits = 8, |
| 62 | .max_register = 2 * 256, |
| 63 | .ranges = da9211_regmap_range, |
| 64 | .num_ranges = ARRAY_SIZE(da9211_regmap_range), |
| 65 | }; |
| 66 | |
| 67 | /* Default limits measured in millivolts and milliamps */ |
| 68 | #define DA9211_MIN_MV 300 |
| 69 | #define DA9211_MAX_MV 1570 |
| 70 | #define DA9211_STEP_MV 10 |
| 71 | |
| 72 | /* Current limits for buck (uA) indices corresponds with register values */ |
| 73 | static const int da9211_current_limits[] = { |
| 74 | 2000000, 2200000, 2400000, 2600000, 2800000, 3000000, 3200000, 3400000, |
| 75 | 3600000, 3800000, 4000000, 4200000, 4400000, 4600000, 4800000, 5000000 |
| 76 | }; |
| 77 | |
| 78 | static unsigned int da9211_buck_get_mode(struct regulator_dev *rdev) |
| 79 | { |
| 80 | int id = rdev_get_id(rdev); |
| 81 | struct da9211 *chip = rdev_get_drvdata(rdev); |
| 82 | unsigned int data; |
| 83 | int ret, mode = 0; |
| 84 | |
| 85 | ret = regmap_read(chip->regmap, DA9211_REG_BUCKA_CONF+id, &data); |
| 86 | if (ret < 0) |
| 87 | return ret; |
| 88 | |
| 89 | switch (data & 0x03) { |
| 90 | case DA9211_BUCK_MODE_SYNC: |
| 91 | mode = REGULATOR_MODE_FAST; |
| 92 | break; |
| 93 | case DA9211_BUCK_MODE_AUTO: |
| 94 | mode = REGULATOR_MODE_NORMAL; |
| 95 | break; |
| 96 | case DA9211_BUCK_MODE_SLEEP: |
| 97 | mode = REGULATOR_MODE_STANDBY; |
| 98 | break; |
| 99 | } |
| 100 | |
| 101 | return mode; |
| 102 | } |
| 103 | |
| 104 | static int da9211_buck_set_mode(struct regulator_dev *rdev, |
| 105 | unsigned int mode) |
| 106 | { |
| 107 | int id = rdev_get_id(rdev); |
| 108 | struct da9211 *chip = rdev_get_drvdata(rdev); |
| 109 | int val = 0; |
| 110 | |
| 111 | switch (mode) { |
| 112 | case REGULATOR_MODE_FAST: |
| 113 | val = DA9211_BUCK_MODE_SYNC; |
| 114 | break; |
| 115 | case REGULATOR_MODE_NORMAL: |
| 116 | val = DA9211_BUCK_MODE_AUTO; |
| 117 | break; |
| 118 | case REGULATOR_MODE_STANDBY: |
| 119 | val = DA9211_BUCK_MODE_SLEEP; |
| 120 | break; |
| 121 | } |
| 122 | |
| 123 | return regmap_update_bits(chip->regmap, DA9211_REG_BUCKA_CONF+id, |
| 124 | 0x03, val); |
| 125 | } |
| 126 | |
| 127 | static int da9211_set_current_limit(struct regulator_dev *rdev, int min, |
| 128 | int max) |
| 129 | { |
| 130 | int id = rdev_get_id(rdev); |
| 131 | struct da9211 *chip = rdev_get_drvdata(rdev); |
| 132 | int i; |
| 133 | |
| 134 | /* search for closest to maximum */ |
| 135 | for (i = ARRAY_SIZE(da9211_current_limits)-1; i >= 0; i--) { |
| 136 | if (min <= da9211_current_limits[i] && |
| 137 | max >= da9211_current_limits[i]) { |
| 138 | return regmap_update_bits(chip->regmap, |
| 139 | DA9211_REG_BUCK_ILIM, |
| 140 | (0x0F << id*4), (i << id*4)); |
| 141 | } |
| 142 | } |
| 143 | |
| 144 | return -EINVAL; |
| 145 | } |
| 146 | |
| 147 | static int da9211_get_current_limit(struct regulator_dev *rdev) |
| 148 | { |
| 149 | int id = rdev_get_id(rdev); |
| 150 | struct da9211 *chip = rdev_get_drvdata(rdev); |
| 151 | unsigned int data; |
| 152 | int ret; |
| 153 | |
| 154 | ret = regmap_read(chip->regmap, DA9211_REG_BUCK_ILIM, &data); |
| 155 | if (ret < 0) |
| 156 | return ret; |
| 157 | |
| 158 | /* select one of 16 values: 0000 (2000mA) to 1111 (5000mA) */ |
| 159 | data = (data >> id*4) & 0x0F; |
| 160 | return da9211_current_limits[data]; |
| 161 | } |
| 162 | |
| 163 | static struct regulator_ops da9211_buck_ops = { |
| 164 | .get_mode = da9211_buck_get_mode, |
| 165 | .set_mode = da9211_buck_set_mode, |
| 166 | .enable = regulator_enable_regmap, |
| 167 | .disable = regulator_disable_regmap, |
| 168 | .is_enabled = regulator_is_enabled_regmap, |
| 169 | .set_voltage_sel = regulator_set_voltage_sel_regmap, |
| 170 | .get_voltage_sel = regulator_get_voltage_sel_regmap, |
| 171 | .list_voltage = regulator_list_voltage_linear, |
| 172 | .set_current_limit = da9211_set_current_limit, |
| 173 | .get_current_limit = da9211_get_current_limit, |
| 174 | }; |
| 175 | |
| 176 | #define DA9211_BUCK(_id) \ |
| 177 | {\ |
| 178 | .name = #_id,\ |
| 179 | .ops = &da9211_buck_ops,\ |
| 180 | .type = REGULATOR_VOLTAGE,\ |
| 181 | .id = DA9211_ID_##_id,\ |
| 182 | .n_voltages = (DA9211_MAX_MV - DA9211_MIN_MV) / DA9211_STEP_MV + 1,\ |
| 183 | .min_uV = (DA9211_MIN_MV * 1000),\ |
| 184 | .uV_step = (DA9211_STEP_MV * 1000),\ |
| 185 | .enable_reg = DA9211_REG_BUCKA_CONT + DA9211_ID_##_id,\ |
| 186 | .enable_mask = DA9211_BUCKA_EN,\ |
| 187 | .vsel_reg = DA9211_REG_VBUCKA_A + DA9211_ID_##_id * 2,\ |
| 188 | .vsel_mask = DA9211_VBUCK_MASK,\ |
| 189 | .owner = THIS_MODULE,\ |
| 190 | } |
| 191 | |
| 192 | static struct regulator_desc da9211_regulators[] = { |
| 193 | DA9211_BUCK(BUCKA), |
| 194 | DA9211_BUCK(BUCKB), |
| 195 | }; |
| 196 | |
| 197 | static irqreturn_t da9211_irq_handler(int irq, void *data) |
| 198 | { |
| 199 | struct da9211 *chip = data; |
| 200 | int reg_val, err, ret = IRQ_NONE; |
| 201 | |
| 202 | err = regmap_read(chip->regmap, DA9211_REG_EVENT_B, ®_val); |
| 203 | if (err < 0) |
| 204 | goto error_i2c; |
| 205 | |
| 206 | if (reg_val & DA9211_E_OV_CURR_A) { |
| 207 | regulator_notifier_call_chain(chip->rdev[0], |
| 208 | REGULATOR_EVENT_OVER_CURRENT, |
| 209 | rdev_get_drvdata(chip->rdev[0])); |
| 210 | |
| 211 | err = regmap_write(chip->regmap, DA9211_REG_EVENT_B, |
| 212 | DA9211_E_OV_CURR_A); |
| 213 | if (err < 0) |
| 214 | goto error_i2c; |
| 215 | |
| 216 | ret = IRQ_HANDLED; |
| 217 | } |
| 218 | |
| 219 | if (reg_val & DA9211_E_OV_CURR_B) { |
| 220 | regulator_notifier_call_chain(chip->rdev[1], |
| 221 | REGULATOR_EVENT_OVER_CURRENT, |
| 222 | rdev_get_drvdata(chip->rdev[1])); |
| 223 | |
| 224 | err = regmap_write(chip->regmap, DA9211_REG_EVENT_B, |
| 225 | DA9211_E_OV_CURR_B); |
| 226 | if (err < 0) |
| 227 | goto error_i2c; |
| 228 | |
| 229 | ret = IRQ_HANDLED; |
| 230 | } |
| 231 | |
| 232 | return ret; |
| 233 | |
| 234 | error_i2c: |
| 235 | dev_err(chip->dev, "I2C error : %d\n", err); |
| 236 | return IRQ_NONE; |
| 237 | } |
| 238 | |
| 239 | static int da9211_regulator_init(struct da9211 *chip) |
| 240 | { |
| 241 | struct regulator_config config = { }; |
| 242 | int i, ret; |
| 243 | unsigned int data; |
| 244 | |
| 245 | ret = regmap_read(chip->regmap, DA9211_REG_CONFIG_E, &data); |
| 246 | if (ret < 0) { |
| 247 | dev_err(chip->dev, "Failed to read CONTROL_E reg: %d\n", ret); |
Axel Lin | 516c151 | 2014-07-20 19:19:35 +0800 | [diff] [blame] | 248 | return ret; |
James Ban | 1028a37 | 2014-07-14 13:48:45 +0900 | [diff] [blame] | 249 | } |
| 250 | |
| 251 | data &= DA9211_SLAVE_SEL; |
| 252 | /* If configuration for 1/2 bucks is different between platform data |
| 253 | * and the register, driver should exit. |
| 254 | */ |
| 255 | if ((chip->pdata->num_buck == 2 && data == 0x40) |
| 256 | || (chip->pdata->num_buck == 1 && data == 0x00)) { |
| 257 | if (data == 0) |
| 258 | chip->num_regulator = 1; |
| 259 | else |
| 260 | chip->num_regulator = 2; |
| 261 | } else { |
James Ban | 1028a37 | 2014-07-14 13:48:45 +0900 | [diff] [blame] | 262 | dev_err(chip->dev, "Configuration is mismatched\n"); |
Axel Lin | 516c151 | 2014-07-20 19:19:35 +0800 | [diff] [blame] | 263 | return -EINVAL; |
James Ban | 1028a37 | 2014-07-14 13:48:45 +0900 | [diff] [blame] | 264 | } |
| 265 | |
| 266 | for (i = 0; i < chip->num_regulator; i++) { |
| 267 | if (chip->pdata) |
| 268 | config.init_data = |
| 269 | &(chip->pdata->init_data[i]); |
| 270 | |
| 271 | config.dev = chip->dev; |
| 272 | config.driver_data = chip; |
| 273 | config.regmap = chip->regmap; |
| 274 | |
| 275 | chip->rdev[i] = devm_regulator_register(chip->dev, |
| 276 | &da9211_regulators[i], &config); |
| 277 | if (IS_ERR(chip->rdev[i])) { |
| 278 | dev_err(chip->dev, |
| 279 | "Failed to register DA9211 regulator\n"); |
Axel Lin | 516c151 | 2014-07-20 19:19:35 +0800 | [diff] [blame] | 280 | return PTR_ERR(chip->rdev[i]); |
James Ban | 1028a37 | 2014-07-14 13:48:45 +0900 | [diff] [blame] | 281 | } |
| 282 | |
| 283 | if (chip->chip_irq != 0) { |
| 284 | ret = regmap_update_bits(chip->regmap, |
| 285 | DA9211_REG_MASK_B, DA9211_M_OV_CURR_A << i, 1); |
| 286 | if (ret < 0) { |
| 287 | dev_err(chip->dev, |
| 288 | "Failed to update mask reg: %d\n", ret); |
Axel Lin | 516c151 | 2014-07-20 19:19:35 +0800 | [diff] [blame] | 289 | return ret; |
James Ban | 1028a37 | 2014-07-14 13:48:45 +0900 | [diff] [blame] | 290 | } |
| 291 | } |
| 292 | } |
| 293 | |
| 294 | return 0; |
James Ban | 1028a37 | 2014-07-14 13:48:45 +0900 | [diff] [blame] | 295 | } |
| 296 | /* |
| 297 | * I2C driver interface functions |
| 298 | */ |
| 299 | static int da9211_i2c_probe(struct i2c_client *i2c, |
| 300 | const struct i2c_device_id *id) |
| 301 | { |
| 302 | struct da9211 *chip; |
| 303 | int error, ret; |
| 304 | |
| 305 | chip = devm_kzalloc(&i2c->dev, sizeof(struct da9211), GFP_KERNEL); |
| 306 | |
| 307 | chip->dev = &i2c->dev; |
| 308 | chip->regmap = devm_regmap_init_i2c(i2c, &da9211_regmap_config); |
| 309 | if (IS_ERR(chip->regmap)) { |
| 310 | error = PTR_ERR(chip->regmap); |
| 311 | dev_err(&i2c->dev, "Failed to allocate register map: %d\n", |
| 312 | error); |
| 313 | return error; |
| 314 | } |
| 315 | |
| 316 | i2c_set_clientdata(i2c, chip); |
| 317 | |
| 318 | chip->pdata = i2c->dev.platform_data; |
| 319 | if (!chip->pdata) { |
| 320 | dev_err(&i2c->dev, "No platform init data supplied\n"); |
| 321 | return -ENODEV; |
| 322 | } |
| 323 | |
| 324 | chip->chip_irq = i2c->irq; |
| 325 | |
| 326 | if (chip->chip_irq != 0) { |
| 327 | ret = devm_request_threaded_irq(chip->dev, chip->chip_irq, NULL, |
| 328 | da9211_irq_handler, |
| 329 | IRQF_TRIGGER_LOW|IRQF_ONESHOT, |
| 330 | "da9211", chip); |
| 331 | if (ret != 0) { |
| 332 | dev_err(chip->dev, "Failed to request IRQ: %d\n", |
| 333 | chip->chip_irq); |
| 334 | return ret; |
| 335 | } |
| 336 | } else { |
| 337 | dev_warn(chip->dev, "No IRQ configured\n"); |
| 338 | } |
| 339 | |
| 340 | ret = da9211_regulator_init(chip); |
| 341 | |
| 342 | if (ret < 0) |
| 343 | dev_err(&i2c->dev, "Failed to initialize regulator: %d\n", ret); |
| 344 | |
| 345 | return ret; |
| 346 | } |
| 347 | |
James Ban | 1028a37 | 2014-07-14 13:48:45 +0900 | [diff] [blame] | 348 | static const struct i2c_device_id da9211_i2c_id[] = { |
| 349 | {"da9211", 0}, |
| 350 | {}, |
| 351 | }; |
| 352 | |
| 353 | MODULE_DEVICE_TABLE(i2c, da9211_i2c_id); |
| 354 | |
| 355 | static struct i2c_driver da9211_regulator_driver = { |
| 356 | .driver = { |
| 357 | .name = "da9211", |
| 358 | .owner = THIS_MODULE, |
| 359 | }, |
| 360 | .probe = da9211_i2c_probe, |
James Ban | 1028a37 | 2014-07-14 13:48:45 +0900 | [diff] [blame] | 361 | .id_table = da9211_i2c_id, |
| 362 | }; |
| 363 | |
| 364 | module_i2c_driver(da9211_regulator_driver); |
| 365 | |
| 366 | MODULE_AUTHOR("James Ban <James.Ban.opensource@diasemi.com>"); |
| 367 | MODULE_DESCRIPTION("Regulator device driver for Dialog DA9211"); |
| 368 | MODULE_LICENSE("GPL v2"); |