blob: 1fab1d1c45026e464f00f8f00ac7696923e8cbe6 [file] [log] [blame]
Milo(Woogyom) Kimc93d08f2013-02-05 18:01:23 +09001/*
2 * LP5521/LP5523/LP55231 Common Driver
3 *
4 * Copyright 2012 Texas Instruments
5 *
6 * Author: Milo(Woogyom) Kim <milo.kim@ti.com>
7 *
8 * This program is free software; you can redistribute it and/or modify
9 * it under the terms of the GNU General Public License version 2 as
10 * published by the Free Software Foundation.
11 *
12 * Derived from leds-lp5521.c, leds-lp5523.c
13 */
14
Milo(Woogyom) Kima85908d2013-02-05 18:07:20 +090015#include <linux/delay.h>
Milo(Woogyom) Kimc93d08f2013-02-05 18:01:23 +090016#include <linux/i2c.h>
17#include <linux/leds.h>
18#include <linux/module.h>
19#include <linux/platform_data/leds-lp55xx.h>
20
21#include "leds-lp55xx-common.h"
22
Milo(Woogyom) Kim48068d52013-02-05 18:08:49 +090023static void lp55xx_reset_device(struct lp55xx_chip *chip)
24{
25 struct lp55xx_device_config *cfg = chip->cfg;
26 u8 addr = cfg->reset.addr;
27 u8 val = cfg->reset.val;
28
29 /* no error checking here because no ACK from the device after reset */
30 lp55xx_write(chip, addr, val);
31}
32
Milo(Woogyom) Kime3a700d2013-02-05 18:09:56 +090033static int lp55xx_detect_device(struct lp55xx_chip *chip)
34{
35 struct lp55xx_device_config *cfg = chip->cfg;
36 u8 addr = cfg->enable.addr;
37 u8 val = cfg->enable.val;
38 int ret;
39
40 ret = lp55xx_write(chip, addr, val);
41 if (ret)
42 return ret;
43
44 usleep_range(1000, 2000);
45
46 ret = lp55xx_read(chip, addr, &val);
47 if (ret)
48 return ret;
49
50 if (val != cfg->enable.val)
51 return -ENODEV;
52
53 return 0;
54}
55
Milo(Woogyom) Kimffbdccd2013-02-05 18:57:36 +090056static int lp55xx_post_init_device(struct lp55xx_chip *chip)
57{
58 struct lp55xx_device_config *cfg = chip->cfg;
59
60 if (!cfg->post_init_device)
61 return 0;
62
63 return cfg->post_init_device(chip);
64}
65
Milo(Woogyom) Kim9e9b3db2013-02-05 19:06:27 +090066static int lp55xx_init_led(struct lp55xx_led *led,
67 struct lp55xx_chip *chip, int chan)
68{
69 return 0;
70}
71
Milo(Woogyom) Kimc93d08f2013-02-05 18:01:23 +090072int lp55xx_write(struct lp55xx_chip *chip, u8 reg, u8 val)
73{
74 return i2c_smbus_write_byte_data(chip->cl, reg, val);
75}
76EXPORT_SYMBOL_GPL(lp55xx_write);
77
78int lp55xx_read(struct lp55xx_chip *chip, u8 reg, u8 *val)
79{
80 s32 ret;
81
82 ret = i2c_smbus_read_byte_data(chip->cl, reg);
83 if (ret < 0)
84 return ret;
85
86 *val = ret;
87 return 0;
88}
89EXPORT_SYMBOL_GPL(lp55xx_read);
90
91int lp55xx_update_bits(struct lp55xx_chip *chip, u8 reg, u8 mask, u8 val)
92{
93 int ret;
94 u8 tmp;
95
96 ret = lp55xx_read(chip, reg, &tmp);
97 if (ret)
98 return ret;
99
100 tmp &= ~mask;
101 tmp |= val & mask;
102
103 return lp55xx_write(chip, reg, tmp);
104}
105EXPORT_SYMBOL_GPL(lp55xx_update_bits);
106
Milo(Woogyom) Kima85908d2013-02-05 18:07:20 +0900107int lp55xx_init_device(struct lp55xx_chip *chip)
108{
109 struct lp55xx_platform_data *pdata;
Milo(Woogyom) Kim48068d52013-02-05 18:08:49 +0900110 struct lp55xx_device_config *cfg;
Milo(Woogyom) Kima85908d2013-02-05 18:07:20 +0900111 struct device *dev = &chip->cl->dev;
112 int ret = 0;
113
114 WARN_ON(!chip);
115
116 pdata = chip->pdata;
Milo(Woogyom) Kim48068d52013-02-05 18:08:49 +0900117 cfg = chip->cfg;
Milo(Woogyom) Kima85908d2013-02-05 18:07:20 +0900118
Milo(Woogyom) Kim48068d52013-02-05 18:08:49 +0900119 if (!pdata || !cfg)
Milo(Woogyom) Kima85908d2013-02-05 18:07:20 +0900120 return -EINVAL;
121
122 if (pdata->setup_resources) {
123 ret = pdata->setup_resources();
124 if (ret < 0) {
125 dev_err(dev, "setup resoure err: %d\n", ret);
126 goto err;
127 }
128 }
129
130 if (pdata->enable) {
131 pdata->enable(0);
132 usleep_range(1000, 2000); /* Keep enable down at least 1ms */
133 pdata->enable(1);
134 usleep_range(1000, 2000); /* 500us abs min. */
135 }
136
Milo(Woogyom) Kim48068d52013-02-05 18:08:49 +0900137 lp55xx_reset_device(chip);
138
139 /*
140 * Exact value is not available. 10 - 20ms
141 * appears to be enough for reset.
142 */
143 usleep_range(10000, 20000);
144
Milo(Woogyom) Kime3a700d2013-02-05 18:09:56 +0900145 ret = lp55xx_detect_device(chip);
146 if (ret) {
147 dev_err(dev, "device detection err: %d\n", ret);
148 goto err;
149 }
150
Milo(Woogyom) Kimffbdccd2013-02-05 18:57:36 +0900151 /* chip specific initialization */
152 ret = lp55xx_post_init_device(chip);
Milo(Woogyom) Kim22ebeb42013-02-05 18:58:35 +0900153 if (ret) {
154 dev_err(dev, "post init device err: %d\n", ret);
155 goto err_post_init;
156 }
Milo(Woogyom) Kimffbdccd2013-02-05 18:57:36 +0900157
158 return 0;
159
Milo(Woogyom) Kim22ebeb42013-02-05 18:58:35 +0900160err_post_init:
Milo(Woogyom) Kim6ce61762013-02-05 19:03:02 +0900161 lp55xx_deinit_device(chip);
Milo(Woogyom) Kima85908d2013-02-05 18:07:20 +0900162err:
163 return ret;
164}
165EXPORT_SYMBOL_GPL(lp55xx_init_device);
166
Milo(Woogyom) Kim6ce61762013-02-05 19:03:02 +0900167void lp55xx_deinit_device(struct lp55xx_chip *chip)
168{
169 struct lp55xx_platform_data *pdata = chip->pdata;
170
171 if (pdata->enable)
172 pdata->enable(0);
173
174 if (pdata->release_resources)
175 pdata->release_resources();
176}
177EXPORT_SYMBOL_GPL(lp55xx_deinit_device);
178
Milo(Woogyom) Kim9e9b3db2013-02-05 19:06:27 +0900179int lp55xx_register_leds(struct lp55xx_led *led, struct lp55xx_chip *chip)
180{
181 struct lp55xx_platform_data *pdata = chip->pdata;
182 struct lp55xx_device_config *cfg = chip->cfg;
183 int num_channels = pdata->num_channels;
184 struct lp55xx_led *each;
185 u8 led_current;
186 int ret;
187 int i;
188
189 if (!cfg->brightness_work_fn) {
190 dev_err(&chip->cl->dev, "empty brightness configuration\n");
191 return -EINVAL;
192 }
193
194 for (i = 0; i < num_channels; i++) {
195
196 /* do not initialize channels that are not connected */
197 if (pdata->led_config[i].led_current == 0)
198 continue;
199
200 led_current = pdata->led_config[i].led_current;
201 each = led + i;
202 ret = lp55xx_init_led(each, chip, i);
203 if (ret)
204 goto err_init_led;
205
206 INIT_WORK(&each->brightness_work, cfg->brightness_work_fn);
207
208 chip->num_leds++;
209 each->chip = chip;
210
211 /* setting led current at each channel */
212 if (cfg->set_led_current)
213 cfg->set_led_current(each, led_current);
214 }
215
216 return 0;
217
218err_init_led:
219 for (i = 0; i < chip->num_leds; i++) {
220 each = led + i;
221 led_classdev_unregister(&each->cdev);
222 flush_work(&each->brightness_work);
223 }
224 return ret;
225}
226EXPORT_SYMBOL_GPL(lp55xx_register_leds);
227
Milo(Woogyom) Kimc93d08f2013-02-05 18:01:23 +0900228MODULE_AUTHOR("Milo Kim <milo.kim@ti.com>");
229MODULE_DESCRIPTION("LP55xx Common Driver");
230MODULE_LICENSE("GPL");