blob: 504cf45d3cb8f5238d023ed7f3f0d982eda9a670 [file] [log] [blame]
Uwe Kleine-Königef43eff2013-09-17 21:08:42 +02001/*
2 * Device tree for EFM32GG-DK3750 development board.
3 *
4 * Documentation available from
5 * http://www.silabs.com/Support%20Documents/TechnicalDocs/efm32gg-dk3750-ug.pdf
6 */
7
8/dts-v1/;
9#include "efm32gg.dtsi"
10
11/ {
12 model = "Energy Micro Giant Gecko Development Kit";
13 compatible = "efm32,dk3750";
14
15 chosen {
16 bootargs = "console=ttyefm4,115200 init=/linuxrc ignore_loglevel ihash_entries=64 dhash_entries=64 earlyprintk uclinux.physaddr=0x8c400000 root=/dev/mtdblock0";
17 };
18
19 memory {
20 reg = <0x88000000 0x400000>;
21 };
22
23 soc {
24 adc@40002000 {
25 status = "ok";
26 };
27
28 i2c@4000a000 {
Uwe Kleine-Könige848f752014-03-14 15:53:52 +010029 energymicro,location = <3>;
Uwe Kleine-Königef43eff2013-09-17 21:08:42 +020030 status = "ok";
31
32 temp@48 {
33 compatible = "st,stds75";
34 reg = <0x48>;
35 };
36
37 eeprom@50 {
38 compatible = "microchip,24c02";
39 reg = <0x50>;
40 pagesize = <16>;
41 };
42 };
43
44 spi0: spi@4000c000 { /* USART0 */
45 cs-gpios = <&gpio 68 1>; // E4
Uwe Kleine-Könige848f752014-03-14 15:53:52 +010046 energymicro,location = <1>;
Uwe Kleine-Königef43eff2013-09-17 21:08:42 +020047 status = "ok";
48
49 microsd@0 {
50 compatible = "mmc-spi-slot";
51 spi-max-frequency = <100000>;
52 voltage-ranges = <3200 3400>;
53 broken-cd;
54 reg = <0>;
55 };
56 };
57
58 spi1: spi@4000c400 { /* USART1 */
59 cs-gpios = <&gpio 51 1>; // D3
Uwe Kleine-Könige848f752014-03-14 15:53:52 +010060 energymicro,location = <1>;
Uwe Kleine-Königef43eff2013-09-17 21:08:42 +020061 status = "ok";
62
63 ks8851@0 {
64 compatible = "ks8851";
65 spi-max-frequency = <6000000>;
66 reg = <0>;
67 interrupt-parent = <&boardfpga>;
68 interrupts = <4>;
69 };
70 };
71
72 uart4: uart@4000e400 { /* UART1 */
Uwe Kleine-Könige848f752014-03-14 15:53:52 +010073 energymicro,location = <2>;
Uwe Kleine-Königef43eff2013-09-17 21:08:42 +020074 status = "ok";
75 };
76
77 boardfpga: boardfpga {
78 compatible = "efm32board";
79 reg = <0x80000000 0x400>;
80 irq-gpios = <&gpio 64 1>;
81 interrupt-controller;
82 #interrupt-cells = <1>;
83 status = "ok";
84 };
85 };
86};