Igor Grinberg | 69f22be | 2010-07-27 15:06:58 +0300 | [diff] [blame] | 1 | /* |
| 2 | * linux/arch/arm/mach-pxa/pxa3xx-ulpi.c |
| 3 | * |
| 4 | * code specific to pxa3xx aka Monahans |
| 5 | * |
| 6 | * Copyright (C) 2010 CompuLab Ltd. |
| 7 | * |
| 8 | * 2010-13-07: Igor Grinberg <grinberg@compulab.co.il> |
| 9 | * initial version: pxa310 USB Host mode support |
| 10 | * |
| 11 | * This program is free software; you can redistribute it and/or modify |
| 12 | * it under the terms of the GNU General Public License version 2 as |
| 13 | * published by the Free Software Foundation. |
| 14 | */ |
| 15 | |
| 16 | #include <linux/module.h> |
| 17 | #include <linux/kernel.h> |
| 18 | #include <linux/slab.h> |
| 19 | #include <linux/device.h> |
| 20 | #include <linux/platform_device.h> |
| 21 | #include <linux/err.h> |
| 22 | #include <linux/io.h> |
| 23 | #include <linux/delay.h> |
| 24 | #include <linux/clk.h> |
| 25 | #include <linux/usb.h> |
| 26 | #include <linux/usb/otg.h> |
| 27 | |
| 28 | #include <mach/hardware.h> |
| 29 | #include <mach/regs-u2d.h> |
| 30 | #include <mach/pxa3xx-u2d.h> |
| 31 | |
| 32 | struct pxa3xx_u2d_ulpi { |
| 33 | struct clk *clk; |
| 34 | void __iomem *mmio_base; |
| 35 | |
| 36 | struct otg_transceiver *otg; |
| 37 | unsigned int ulpi_mode; |
| 38 | }; |
| 39 | |
| 40 | static struct pxa3xx_u2d_ulpi *u2d; |
| 41 | |
| 42 | static inline u32 u2d_readl(u32 reg) |
| 43 | { |
| 44 | return __raw_readl(u2d->mmio_base + reg); |
| 45 | } |
| 46 | |
| 47 | static inline void u2d_writel(u32 reg, u32 val) |
| 48 | { |
| 49 | __raw_writel(val, u2d->mmio_base + reg); |
| 50 | } |
| 51 | |
| 52 | #if defined(CONFIG_PXA310_ULPI) |
| 53 | enum u2d_ulpi_phy_mode { |
| 54 | SYNCH = 0, |
| 55 | CARKIT = (1 << 0), |
| 56 | SER_3PIN = (1 << 1), |
| 57 | SER_6PIN = (1 << 2), |
| 58 | LOWPOWER = (1 << 3), |
| 59 | }; |
| 60 | |
| 61 | static inline enum u2d_ulpi_phy_mode pxa310_ulpi_get_phymode(void) |
| 62 | { |
| 63 | return (u2d_readl(U2DOTGUSR) >> 28) & 0xF; |
| 64 | } |
| 65 | |
| 66 | static int pxa310_ulpi_poll(void) |
| 67 | { |
| 68 | int timeout = 50000; |
| 69 | |
| 70 | while (timeout--) { |
| 71 | if (!(u2d_readl(U2DOTGUCR) & U2DOTGUCR_RUN)) |
| 72 | return 0; |
| 73 | |
| 74 | cpu_relax(); |
| 75 | } |
| 76 | |
| 77 | pr_warning("%s: ULPI access timed out!\n", __func__); |
| 78 | |
| 79 | return -ETIMEDOUT; |
| 80 | } |
| 81 | |
| 82 | static int pxa310_ulpi_read(struct otg_transceiver *otg, u32 reg) |
| 83 | { |
| 84 | int err; |
| 85 | |
| 86 | if (pxa310_ulpi_get_phymode() != SYNCH) { |
| 87 | pr_warning("%s: PHY is not in SYNCH mode!\n", __func__); |
| 88 | return -EBUSY; |
| 89 | } |
| 90 | |
| 91 | u2d_writel(U2DOTGUCR, U2DOTGUCR_RUN | U2DOTGUCR_RNW | (reg << 16)); |
| 92 | msleep(5); |
| 93 | |
| 94 | err = pxa310_ulpi_poll(); |
| 95 | if (err) |
| 96 | return err; |
| 97 | |
| 98 | return u2d_readl(U2DOTGUCR) & U2DOTGUCR_RDATA; |
| 99 | } |
| 100 | |
| 101 | static int pxa310_ulpi_write(struct otg_transceiver *otg, u32 val, u32 reg) |
| 102 | { |
| 103 | if (pxa310_ulpi_get_phymode() != SYNCH) { |
| 104 | pr_warning("%s: PHY is not in SYNCH mode!\n", __func__); |
| 105 | return -EBUSY; |
| 106 | } |
| 107 | |
| 108 | u2d_writel(U2DOTGUCR, U2DOTGUCR_RUN | (reg << 16) | (val << 8)); |
| 109 | msleep(5); |
| 110 | |
| 111 | return pxa310_ulpi_poll(); |
| 112 | } |
| 113 | |
| 114 | struct otg_io_access_ops pxa310_ulpi_access_ops = { |
| 115 | .read = pxa310_ulpi_read, |
| 116 | .write = pxa310_ulpi_write, |
| 117 | }; |
| 118 | |
| 119 | static void pxa310_otg_transceiver_rtsm(void) |
| 120 | { |
| 121 | u32 u2dotgcr; |
| 122 | |
| 123 | /* put PHY to sync mode */ |
| 124 | u2dotgcr = u2d_readl(U2DOTGCR); |
| 125 | u2dotgcr |= U2DOTGCR_RTSM | U2DOTGCR_UTMID; |
| 126 | u2d_writel(U2DOTGCR, u2dotgcr); |
| 127 | msleep(10); |
| 128 | |
| 129 | /* setup OTG sync mode */ |
| 130 | u2dotgcr = u2d_readl(U2DOTGCR); |
| 131 | u2dotgcr |= U2DOTGCR_ULAF; |
| 132 | u2dotgcr &= ~(U2DOTGCR_SMAF | U2DOTGCR_CKAF); |
| 133 | u2d_writel(U2DOTGCR, u2dotgcr); |
| 134 | } |
| 135 | |
| 136 | static int pxa310_start_otg_host_transcvr(struct usb_bus *host) |
| 137 | { |
| 138 | int err; |
| 139 | |
| 140 | pxa310_otg_transceiver_rtsm(); |
| 141 | |
| 142 | err = otg_init(u2d->otg); |
| 143 | if (err) { |
| 144 | pr_err("OTG transceiver init failed"); |
| 145 | return err; |
| 146 | } |
| 147 | |
| 148 | err = otg_set_vbus(u2d->otg, 1); |
| 149 | if (err) { |
| 150 | pr_err("OTG transceiver VBUS set failed"); |
| 151 | return err; |
| 152 | } |
| 153 | |
| 154 | err = otg_set_host(u2d->otg, host); |
| 155 | if (err) |
| 156 | pr_err("OTG transceiver Host mode set failed"); |
| 157 | |
| 158 | return err; |
| 159 | } |
| 160 | |
| 161 | static int pxa310_start_otg_hc(struct usb_bus *host) |
| 162 | { |
| 163 | u32 u2dotgcr; |
| 164 | int err; |
| 165 | |
| 166 | /* disable USB device controller */ |
| 167 | u2d_writel(U2DCR, u2d_readl(U2DCR) & ~U2DCR_UDE); |
| 168 | u2d_writel(U2DOTGCR, u2d_readl(U2DOTGCR) | U2DOTGCR_UTMID); |
| 169 | u2d_writel(U2DOTGICR, u2d_readl(U2DOTGICR) & ~0x37F7F); |
| 170 | |
| 171 | err = pxa310_start_otg_host_transcvr(host); |
| 172 | if (err) |
| 173 | return err; |
| 174 | |
| 175 | /* set xceiver mode */ |
| 176 | if (u2d->ulpi_mode & ULPI_IC_6PIN_SERIAL) |
| 177 | u2d_writel(U2DP3CR, u2d_readl(U2DP3CR) & ~U2DP3CR_P2SS); |
| 178 | else if (u2d->ulpi_mode & ULPI_IC_3PIN_SERIAL) |
| 179 | u2d_writel(U2DP3CR, u2d_readl(U2DP3CR) | U2DP3CR_P2SS); |
| 180 | |
| 181 | /* start OTG host controller */ |
| 182 | u2dotgcr = u2d_readl(U2DOTGCR) | U2DOTGCR_SMAF; |
| 183 | u2d_writel(U2DOTGCR, u2dotgcr & ~(U2DOTGCR_ULAF | U2DOTGCR_CKAF)); |
| 184 | |
| 185 | return 0; |
| 186 | } |
| 187 | |
| 188 | static void pxa310_stop_otg_hc(void) |
| 189 | { |
| 190 | pxa310_otg_transceiver_rtsm(); |
| 191 | |
| 192 | otg_set_host(u2d->otg, NULL); |
| 193 | otg_set_vbus(u2d->otg, 0); |
| 194 | otg_shutdown(u2d->otg); |
| 195 | } |
| 196 | |
| 197 | static void pxa310_u2d_setup_otg_hc(void) |
| 198 | { |
| 199 | u32 u2dotgcr; |
| 200 | |
| 201 | u2dotgcr = u2d_readl(U2DOTGCR); |
| 202 | u2dotgcr |= U2DOTGCR_ULAF | U2DOTGCR_UTMID; |
| 203 | u2dotgcr &= ~(U2DOTGCR_SMAF | U2DOTGCR_CKAF); |
| 204 | u2d_writel(U2DOTGCR, u2dotgcr); |
| 205 | msleep(5); |
| 206 | u2d_writel(U2DOTGCR, u2dotgcr | U2DOTGCR_ULE); |
| 207 | msleep(5); |
| 208 | u2d_writel(U2DOTGICR, u2d_readl(U2DOTGICR) & ~0x37F7F); |
| 209 | } |
| 210 | |
| 211 | static int pxa310_otg_init(struct pxa3xx_u2d_platform_data *pdata) |
| 212 | { |
| 213 | unsigned int ulpi_mode = ULPI_OTG_DRVVBUS; |
| 214 | |
| 215 | if (pdata) { |
| 216 | if (pdata->ulpi_mode & ULPI_SER_6PIN) |
| 217 | ulpi_mode |= ULPI_IC_6PIN_SERIAL; |
| 218 | else if (pdata->ulpi_mode & ULPI_SER_3PIN) |
| 219 | ulpi_mode |= ULPI_IC_3PIN_SERIAL; |
| 220 | } |
| 221 | |
| 222 | u2d->ulpi_mode = ulpi_mode; |
| 223 | |
| 224 | u2d->otg = otg_ulpi_create(&pxa310_ulpi_access_ops, ulpi_mode); |
| 225 | if (!u2d->otg) |
| 226 | return -ENOMEM; |
| 227 | |
| 228 | u2d->otg->io_priv = u2d->mmio_base; |
| 229 | |
| 230 | return 0; |
| 231 | } |
| 232 | |
| 233 | static void pxa310_otg_exit(void) |
| 234 | { |
| 235 | kfree(u2d->otg); |
| 236 | } |
| 237 | #else |
| 238 | static inline void pxa310_u2d_setup_otg_hc(void) {} |
| 239 | static inline int pxa310_start_otg_hc(struct usb_bus *host) |
| 240 | { |
| 241 | return 0; |
| 242 | } |
| 243 | static inline void pxa310_stop_otg_hc(void) {} |
| 244 | static inline int pxa310_otg_init(struct pxa3xx_u2d_platform_data *pdata) |
| 245 | { |
| 246 | return 0; |
| 247 | } |
| 248 | static inline void pxa310_otg_exit(void) {} |
| 249 | #endif /* CONFIG_PXA310_ULPI */ |
| 250 | |
| 251 | int pxa3xx_u2d_start_hc(struct usb_bus *host) |
| 252 | { |
| 253 | int err = 0; |
| 254 | |
Marek Vasut | a754aea | 2010-09-03 22:35:46 +0200 | [diff] [blame^] | 255 | /* In case the PXA3xx ULPI isn't used, do nothing. */ |
| 256 | if (!u2d) |
| 257 | return 0; |
| 258 | |
Igor Grinberg | 69f22be | 2010-07-27 15:06:58 +0300 | [diff] [blame] | 259 | clk_enable(u2d->clk); |
| 260 | |
| 261 | if (cpu_is_pxa310()) { |
| 262 | pxa310_u2d_setup_otg_hc(); |
| 263 | err = pxa310_start_otg_hc(host); |
| 264 | } |
| 265 | |
| 266 | return err; |
| 267 | } |
| 268 | |
| 269 | void pxa3xx_u2d_stop_hc(struct usb_bus *host) |
| 270 | { |
Marek Vasut | a754aea | 2010-09-03 22:35:46 +0200 | [diff] [blame^] | 271 | /* In case the PXA3xx ULPI isn't used, do nothing. */ |
| 272 | if (!u2d) |
| 273 | return; |
| 274 | |
Igor Grinberg | 69f22be | 2010-07-27 15:06:58 +0300 | [diff] [blame] | 275 | if (cpu_is_pxa310()) |
| 276 | pxa310_stop_otg_hc(); |
| 277 | |
| 278 | clk_disable(u2d->clk); |
| 279 | } |
| 280 | |
| 281 | static int pxa3xx_u2d_probe(struct platform_device *pdev) |
| 282 | { |
| 283 | struct pxa3xx_u2d_platform_data *pdata = pdev->dev.platform_data; |
| 284 | struct resource *r; |
| 285 | int err; |
| 286 | |
| 287 | u2d = kzalloc(sizeof(struct pxa3xx_u2d_ulpi), GFP_KERNEL); |
| 288 | if (!u2d) { |
| 289 | dev_err(&pdev->dev, "failed to allocate memory\n"); |
| 290 | return -ENOMEM; |
| 291 | } |
| 292 | |
| 293 | u2d->clk = clk_get(&pdev->dev, NULL); |
| 294 | if (IS_ERR(u2d->clk)) { |
| 295 | dev_err(&pdev->dev, "failed to get u2d clock\n"); |
| 296 | err = PTR_ERR(u2d->clk); |
| 297 | goto err_free_mem; |
| 298 | } |
| 299 | |
| 300 | r = platform_get_resource(pdev, IORESOURCE_MEM, 0); |
| 301 | if (!r) { |
| 302 | dev_err(&pdev->dev, "no IO memory resource defined\n"); |
| 303 | err = -ENODEV; |
| 304 | goto err_put_clk; |
| 305 | } |
| 306 | |
| 307 | r = request_mem_region(r->start, resource_size(r), pdev->name); |
| 308 | if (!r) { |
| 309 | dev_err(&pdev->dev, "failed to request memory resource\n"); |
| 310 | err = -EBUSY; |
| 311 | goto err_put_clk; |
| 312 | } |
| 313 | |
| 314 | u2d->mmio_base = ioremap(r->start, resource_size(r)); |
| 315 | if (!u2d->mmio_base) { |
| 316 | dev_err(&pdev->dev, "ioremap() failed\n"); |
| 317 | err = -ENODEV; |
| 318 | goto err_free_res; |
| 319 | } |
| 320 | |
| 321 | if (pdata->init) { |
| 322 | err = pdata->init(&pdev->dev); |
| 323 | if (err) |
| 324 | goto err_free_io; |
| 325 | } |
| 326 | |
| 327 | /* Only PXA310 U2D has OTG functionality */ |
| 328 | if (cpu_is_pxa310()) { |
| 329 | err = pxa310_otg_init(pdata); |
| 330 | if (err) |
| 331 | goto err_free_plat; |
| 332 | } |
| 333 | |
| 334 | platform_set_drvdata(pdev, &u2d); |
| 335 | |
| 336 | return 0; |
| 337 | |
| 338 | err_free_plat: |
| 339 | if (pdata->exit) |
| 340 | pdata->exit(&pdev->dev); |
| 341 | err_free_io: |
| 342 | iounmap(u2d->mmio_base); |
| 343 | err_free_res: |
| 344 | release_mem_region(r->start, resource_size(r)); |
| 345 | err_put_clk: |
| 346 | clk_put(u2d->clk); |
| 347 | err_free_mem: |
| 348 | kfree(u2d); |
| 349 | return err; |
| 350 | } |
| 351 | |
| 352 | static int pxa3xx_u2d_remove(struct platform_device *pdev) |
| 353 | { |
| 354 | struct pxa3xx_u2d_platform_data *pdata = pdev->dev.platform_data; |
| 355 | struct resource *r; |
| 356 | |
| 357 | if (cpu_is_pxa310()) { |
| 358 | pxa310_stop_otg_hc(); |
| 359 | pxa310_otg_exit(); |
| 360 | } |
| 361 | |
| 362 | if (pdata->exit) |
| 363 | pdata->exit(&pdev->dev); |
| 364 | |
| 365 | platform_set_drvdata(pdev, NULL); |
| 366 | iounmap(u2d->mmio_base); |
| 367 | r = platform_get_resource(pdev, IORESOURCE_MEM, 0); |
| 368 | release_mem_region(r->start, resource_size(r)); |
| 369 | |
| 370 | clk_put(u2d->clk); |
| 371 | |
| 372 | kfree(u2d); |
| 373 | |
| 374 | return 0; |
| 375 | } |
| 376 | |
| 377 | static struct platform_driver pxa3xx_u2d_ulpi_driver = { |
| 378 | .driver = { |
| 379 | .name = "pxa3xx-u2d", |
| 380 | .owner = THIS_MODULE, |
| 381 | }, |
| 382 | .probe = pxa3xx_u2d_probe, |
| 383 | .remove = pxa3xx_u2d_remove, |
| 384 | }; |
| 385 | |
| 386 | static int pxa3xx_u2d_ulpi_init(void) |
| 387 | { |
| 388 | return platform_driver_register(&pxa3xx_u2d_ulpi_driver); |
| 389 | } |
| 390 | module_init(pxa3xx_u2d_ulpi_init); |
| 391 | |
| 392 | static void __exit pxa3xx_u2d_ulpi_exit(void) |
| 393 | { |
| 394 | platform_driver_unregister(&pxa3xx_u2d_ulpi_driver); |
| 395 | } |
| 396 | module_exit(pxa3xx_u2d_ulpi_exit); |
| 397 | |
| 398 | MODULE_DESCRIPTION("PXA3xx U2D ULPI driver"); |
| 399 | MODULE_AUTHOR("Igor Grinberg"); |
| 400 | MODULE_LICENSE("GPL v2"); |