| Bart Van Assche | dc1bdbd | 2011-09-16 20:41:13 +0200 | [diff] [blame] | 1 | What: /sys/class/srp_remote_ports/port-<h>:<n>/delete |
| 2 | Date: June 1, 2012 |
| 3 | KernelVersion: 3.7 |
| 4 | Contact: linux-scsi@vger.kernel.org, linux-rdma@vger.kernel.org |
| 5 | Description: Instructs an SRP initiator to disconnect from a target and to |
| 6 | remove all LUNs imported from that target. |
| 7 | |
| Bart Van Assche | 29c1732 | 2013-10-26 14:33:30 +0200 | [diff] [blame] | 8 | What: /sys/class/srp_remote_ports/port-<h>:<n>/dev_loss_tmo |
| 9 | Date: February 1, 2014 |
| 10 | KernelVersion: 3.13 |
| 11 | Contact: linux-scsi@vger.kernel.org, linux-rdma@vger.kernel.org |
| 12 | Description: Number of seconds the SCSI layer will wait after a transport |
| 13 | layer error has been observed before removing a target port. |
| 14 | Zero means immediate removal. Setting this attribute to "off" |
| 15 | will disable the dev_loss timer. |
| 16 | |
| 17 | What: /sys/class/srp_remote_ports/port-<h>:<n>/fast_io_fail_tmo |
| 18 | Date: February 1, 2014 |
| 19 | KernelVersion: 3.13 |
| 20 | Contact: linux-scsi@vger.kernel.org, linux-rdma@vger.kernel.org |
| 21 | Description: Number of seconds the SCSI layer will wait after a transport |
| 22 | layer error has been observed before failing I/O. Zero means |
| 23 | failing I/O immediately. Setting this attribute to "off" will |
| 24 | disable the fast_io_fail timer. |
| 25 | |
| Bart Van Assche | 7e1265b | 2011-10-09 14:35:48 +0200 | [diff] [blame] | 26 | What: /sys/class/srp_remote_ports/port-<h>:<n>/port_id |
| 27 | Date: June 27, 2007 |
| 28 | KernelVersion: 2.6.24 |
| 29 | Contact: linux-scsi@vger.kernel.org |
| 30 | Description: 16-byte local SRP port identifier in hexadecimal format. An |
| 31 | example: 4c:49:4e:55:58:20:56:49:4f:00:00:00:00:00:00:00. |
| 32 | |
| Bart Van Assche | 8c64e45 | 2013-10-26 14:35:59 +0200 | [diff] [blame] | 33 | What: /sys/class/srp_remote_ports/port-<h>:<n>/reconnect_delay |
| 34 | Date: February 1, 2014 |
| 35 | KernelVersion: 3.13 |
| 36 | Contact: linux-scsi@vger.kernel.org, linux-rdma@vger.kernel.org |
| 37 | Description: Number of seconds the SCSI layer will wait after a reconnect |
| 38 | attempt failed before retrying. Setting this attribute to |
| 39 | "off" will disable time-based reconnecting. |
| 40 | |
| Bart Van Assche | 7e1265b | 2011-10-09 14:35:48 +0200 | [diff] [blame] | 41 | What: /sys/class/srp_remote_ports/port-<h>:<n>/roles |
| 42 | Date: June 27, 2007 |
| 43 | KernelVersion: 2.6.24 |
| 44 | Contact: linux-scsi@vger.kernel.org |
| 45 | Description: Role of the remote port. Either "SRP Initiator" or "SRP Target". |
| Bart Van Assche | 29c1732 | 2013-10-26 14:33:30 +0200 | [diff] [blame] | 46 | |
| 47 | What: /sys/class/srp_remote_ports/port-<h>:<n>/state |
| 48 | Date: February 1, 2014 |
| 49 | KernelVersion: 3.13 |
| 50 | Contact: linux-scsi@vger.kernel.org, linux-rdma@vger.kernel.org |
| 51 | Description: State of the transport layer used for communication with the |
| 52 | remote port. "running" if the transport layer is operational; |
| 53 | "blocked" if a transport layer error has been encountered but |
| 54 | the fast_io_fail_tmo timer has not yet fired; "fail-fast" |
| 55 | after the fast_io_fail_tmo timer has fired and before the |
| 56 | "dev_loss_tmo" timer has fired; "lost" after the |
| 57 | "dev_loss_tmo" timer has fired and before the port is finally |
| 58 | removed. |