Steven Toth | 265a651 | 2008-04-18 21:34:00 -0300 | [diff] [blame] | 1 | /* |
| 2 | * Driver for the Auvitek AU0828 USB bridge |
| 3 | * |
| 4 | * Copyright (c) 2008 Steven Toth <stoth@hauppauge.com> |
| 5 | * |
| 6 | * This program is free software; you can redistribute it and/or modify |
| 7 | * it under the terms of the GNU General Public License as published by |
| 8 | * the Free Software Foundation; either version 2 of the License, or |
| 9 | * (at your option) any later version. |
| 10 | * |
| 11 | * This program is distributed in the hope that it will be useful, |
| 12 | * but WITHOUT ANY WARRANTY; without even the implied warranty of |
| 13 | * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the |
| 14 | * |
| 15 | * GNU General Public License for more details. |
| 16 | * |
| 17 | * You should have received a copy of the GNU General Public License |
| 18 | * along with this program; if not, write to the Free Software |
| 19 | * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. |
| 20 | */ |
| 21 | |
| 22 | #include <linux/module.h> |
| 23 | #include <linux/moduleparam.h> |
| 24 | #include <linux/init.h> |
| 25 | #include <linux/delay.h> |
| 26 | #include <asm/io.h> |
| 27 | |
| 28 | #include "au0828.h" |
| 29 | |
| 30 | #include <media/v4l2-common.h> |
| 31 | |
Steven Toth | bc3c613 | 2008-04-18 21:39:11 -0300 | [diff] [blame] | 32 | unsigned int i2c_debug = 0; |
| 33 | module_param(i2c_debug, int, 0444); |
Steven Toth | 265a651 | 2008-04-18 21:34:00 -0300 | [diff] [blame] | 34 | MODULE_PARM_DESC(i2c_debug, "enable debug messages [i2c]"); |
| 35 | |
Steven Toth | bc3c613 | 2008-04-18 21:39:11 -0300 | [diff] [blame] | 36 | unsigned int i2c_scan = 0; |
Steven Toth | 265a651 | 2008-04-18 21:34:00 -0300 | [diff] [blame] | 37 | module_param(i2c_scan, int, 0444); |
| 38 | MODULE_PARM_DESC(i2c_scan, "scan i2c bus at insmod time"); |
| 39 | |
Steven Toth | 265a651 | 2008-04-18 21:34:00 -0300 | [diff] [blame] | 40 | #define I2C_WAIT_DELAY 512 |
| 41 | #define I2C_WAIT_RETRY 64 |
| 42 | |
| 43 | static inline int i2c_slave_did_write_ack(struct i2c_adapter *i2c_adap) |
| 44 | { |
| 45 | struct au0828_dev *dev = i2c_adap->algo_data; |
| 46 | return au0828_read(dev, REG_201) & 0x08 ? 0 : 1; |
| 47 | } |
| 48 | |
| 49 | static inline int i2c_slave_did_read_ack(struct i2c_adapter *i2c_adap) |
| 50 | { |
| 51 | struct au0828_dev *dev = i2c_adap->algo_data; |
| 52 | return au0828_read(dev, REG_201) & 0x02 ? 0 : 1; |
| 53 | } |
| 54 | |
| 55 | static int i2c_wait_read_ack(struct i2c_adapter *i2c_adap) |
| 56 | { |
| 57 | int count; |
| 58 | |
| 59 | for (count = 0; count < I2C_WAIT_RETRY; count++) { |
| 60 | if (!i2c_slave_did_read_ack(i2c_adap)) |
| 61 | break; |
| 62 | udelay(I2C_WAIT_DELAY); |
| 63 | } |
| 64 | |
| 65 | if (I2C_WAIT_RETRY == count) |
| 66 | return 0; |
| 67 | |
| 68 | return 1; |
| 69 | } |
| 70 | |
| 71 | static inline int i2c_is_read_busy(struct i2c_adapter *i2c_adap) |
| 72 | { |
| 73 | struct au0828_dev *dev = i2c_adap->algo_data; |
| 74 | return au0828_read(dev, REG_201) & 0x01 ? 0 : 1; |
| 75 | } |
| 76 | |
| 77 | static int i2c_wait_read_done(struct i2c_adapter *i2c_adap) |
| 78 | { |
| 79 | int count; |
| 80 | |
| 81 | for (count = 0; count < I2C_WAIT_RETRY; count++) { |
| 82 | if (!i2c_is_read_busy(i2c_adap)) |
| 83 | break; |
| 84 | udelay(I2C_WAIT_DELAY); |
| 85 | } |
| 86 | |
| 87 | if (I2C_WAIT_RETRY == count) |
| 88 | return 0; |
| 89 | |
| 90 | return 1; |
| 91 | } |
| 92 | |
| 93 | static inline int i2c_is_write_done(struct i2c_adapter *i2c_adap) |
| 94 | { |
| 95 | struct au0828_dev *dev = i2c_adap->algo_data; |
| 96 | return au0828_read(dev, REG_201) & 0x04 ? 1 : 0; |
| 97 | } |
| 98 | |
| 99 | static int i2c_wait_write_done(struct i2c_adapter *i2c_adap) |
| 100 | { |
| 101 | int count; |
| 102 | |
| 103 | for (count = 0; count < I2C_WAIT_RETRY; count++) { |
| 104 | if (i2c_is_write_done(i2c_adap)) |
| 105 | break; |
| 106 | udelay(I2C_WAIT_DELAY); |
| 107 | } |
| 108 | |
| 109 | if (I2C_WAIT_RETRY == count) |
| 110 | return 0; |
| 111 | |
| 112 | return 1; |
| 113 | } |
| 114 | |
| 115 | static inline int i2c_is_busy(struct i2c_adapter *i2c_adap) |
| 116 | { |
| 117 | struct au0828_dev *dev = i2c_adap->algo_data; |
| 118 | return au0828_read(dev, REG_201) & 0x10 ? 1 : 0; |
| 119 | } |
| 120 | |
| 121 | static int i2c_wait_done(struct i2c_adapter *i2c_adap) |
| 122 | { |
| 123 | int count; |
| 124 | |
| 125 | for (count = 0; count < I2C_WAIT_RETRY; count++) { |
| 126 | if (!i2c_is_busy(i2c_adap)) |
| 127 | break; |
| 128 | udelay(I2C_WAIT_DELAY); |
| 129 | } |
| 130 | |
| 131 | if (I2C_WAIT_RETRY == count) |
| 132 | return 0; |
| 133 | |
| 134 | return 1; |
| 135 | } |
| 136 | |
| 137 | /* FIXME: Implement join handling correctly */ |
| 138 | static int i2c_sendbytes(struct i2c_adapter *i2c_adap, |
| 139 | const struct i2c_msg *msg, int joined_rlen) |
| 140 | { |
| 141 | int i, strobe = 0; |
| 142 | struct au0828_dev *dev = i2c_adap->algo_data; |
| 143 | |
Michael Krufky | f07e8e4 | 2008-04-18 21:42:30 -0300 | [diff] [blame] | 144 | dprintk(4, "%s()\n", __func__); |
Steven Toth | 265a651 | 2008-04-18 21:34:00 -0300 | [diff] [blame] | 145 | |
| 146 | au0828_write(dev, REG_2FF, 0x01); |
| 147 | au0828_write(dev, REG_202, 0x07); |
| 148 | |
| 149 | /* Hardware needs 8 bit addresses */ |
| 150 | au0828_write(dev, REG_203, msg->addr << 1); |
| 151 | |
Steven Toth | bc3c613 | 2008-04-18 21:39:11 -0300 | [diff] [blame] | 152 | dprintk(4, "SEND: %02x\n", msg->addr); |
Steven Toth | 265a651 | 2008-04-18 21:34:00 -0300 | [diff] [blame] | 153 | |
Steven Toth | a9c36aa | 2008-04-17 21:41:28 -0300 | [diff] [blame^] | 154 | for (i = 0; i < msg->len;) { |
Steven Toth | 265a651 | 2008-04-18 21:34:00 -0300 | [diff] [blame] | 155 | |
Steven Toth | bc3c613 | 2008-04-18 21:39:11 -0300 | [diff] [blame] | 156 | dprintk(4, " %02x\n", msg->buf[i]); |
Steven Toth | 265a651 | 2008-04-18 21:34:00 -0300 | [diff] [blame] | 157 | |
| 158 | au0828_write(dev, REG_205, msg->buf[i]); |
| 159 | |
| 160 | strobe++; |
| 161 | i++; |
| 162 | |
| 163 | if ((strobe >= 4) || (i >= msg->len)) { |
| 164 | |
| 165 | /* Strobe the byte into the bus */ |
| 166 | if (i < msg->len) |
| 167 | au0828_write(dev, REG_200, 0x41); |
| 168 | else |
| 169 | au0828_write(dev, REG_200, 0x01); |
| 170 | |
| 171 | /* Reset strobe trigger */ |
| 172 | strobe = 0; |
| 173 | |
| 174 | if (!i2c_wait_write_done(i2c_adap)) |
| 175 | return -EIO; |
| 176 | |
| 177 | } |
| 178 | |
| 179 | } |
| 180 | if (!i2c_wait_done(i2c_adap)) |
| 181 | return -EIO; |
| 182 | |
Steven Toth | bc3c613 | 2008-04-18 21:39:11 -0300 | [diff] [blame] | 183 | dprintk(4, "\n"); |
Steven Toth | 265a651 | 2008-04-18 21:34:00 -0300 | [diff] [blame] | 184 | |
| 185 | return msg->len; |
| 186 | } |
| 187 | |
| 188 | /* FIXME: Implement join handling correctly */ |
| 189 | static int i2c_readbytes(struct i2c_adapter *i2c_adap, |
| 190 | const struct i2c_msg *msg, int joined) |
| 191 | { |
| 192 | struct au0828_dev *dev = i2c_adap->algo_data; |
| 193 | int i; |
| 194 | |
Michael Krufky | f07e8e4 | 2008-04-18 21:42:30 -0300 | [diff] [blame] | 195 | dprintk(4, "%s()\n", __func__); |
Steven Toth | 265a651 | 2008-04-18 21:34:00 -0300 | [diff] [blame] | 196 | |
| 197 | au0828_write(dev, REG_2FF, 0x01); |
| 198 | au0828_write(dev, REG_202, 0x07); |
| 199 | |
| 200 | /* Hardware needs 8 bit addresses */ |
| 201 | au0828_write(dev, REG_203, msg->addr << 1); |
| 202 | |
Steven Toth | bc3c613 | 2008-04-18 21:39:11 -0300 | [diff] [blame] | 203 | dprintk(4, " RECV:\n"); |
Steven Toth | 265a651 | 2008-04-18 21:34:00 -0300 | [diff] [blame] | 204 | |
| 205 | /* Deal with i2c_scan */ |
| 206 | if (msg->len == 0) { |
| 207 | au0828_write(dev, REG_200, 0x20); |
| 208 | if (i2c_wait_read_ack(i2c_adap)) |
| 209 | return -EIO; |
| 210 | return 0; |
| 211 | } |
| 212 | |
Steven Toth | a9c36aa | 2008-04-17 21:41:28 -0300 | [diff] [blame^] | 213 | for (i = 0; i < msg->len;) { |
Steven Toth | 265a651 | 2008-04-18 21:34:00 -0300 | [diff] [blame] | 214 | |
| 215 | i++; |
| 216 | |
| 217 | if (i < msg->len) |
| 218 | au0828_write(dev, REG_200, 0x60); |
| 219 | else |
| 220 | au0828_write(dev, REG_200, 0x20); |
| 221 | |
| 222 | if (!i2c_wait_read_done(i2c_adap)) |
| 223 | return -EIO; |
| 224 | |
| 225 | msg->buf[i-1] = au0828_read(dev, REG_209) & 0xff; |
| 226 | |
Steven Toth | bc3c613 | 2008-04-18 21:39:11 -0300 | [diff] [blame] | 227 | dprintk(4, " %02x\n", msg->buf[i-1]); |
Steven Toth | 265a651 | 2008-04-18 21:34:00 -0300 | [diff] [blame] | 228 | } |
| 229 | if (!i2c_wait_done(i2c_adap)) |
| 230 | return -EIO; |
| 231 | |
Steven Toth | bc3c613 | 2008-04-18 21:39:11 -0300 | [diff] [blame] | 232 | dprintk(4, "\n"); |
Steven Toth | 265a651 | 2008-04-18 21:34:00 -0300 | [diff] [blame] | 233 | |
| 234 | return msg->len; |
| 235 | } |
| 236 | |
| 237 | static int i2c_xfer(struct i2c_adapter *i2c_adap, |
| 238 | struct i2c_msg *msgs, int num) |
| 239 | { |
| 240 | int i, retval = 0; |
| 241 | |
Michael Krufky | f07e8e4 | 2008-04-18 21:42:30 -0300 | [diff] [blame] | 242 | dprintk(4, "%s(num = %d)\n", __func__, num); |
Steven Toth | 265a651 | 2008-04-18 21:34:00 -0300 | [diff] [blame] | 243 | |
Steven Toth | a9c36aa | 2008-04-17 21:41:28 -0300 | [diff] [blame^] | 244 | for (i = 0; i < num; i++) { |
Steven Toth | bc3c613 | 2008-04-18 21:39:11 -0300 | [diff] [blame] | 245 | dprintk(4, "%s(num = %d) addr = 0x%02x len = 0x%x\n", |
Michael Krufky | f07e8e4 | 2008-04-18 21:42:30 -0300 | [diff] [blame] | 246 | __func__, num, msgs[i].addr, msgs[i].len); |
Steven Toth | 265a651 | 2008-04-18 21:34:00 -0300 | [diff] [blame] | 247 | if (msgs[i].flags & I2C_M_RD) { |
| 248 | /* read */ |
| 249 | retval = i2c_readbytes(i2c_adap, &msgs[i], 0); |
| 250 | } else if (i + 1 < num && (msgs[i + 1].flags & I2C_M_RD) && |
| 251 | msgs[i].addr == msgs[i + 1].addr) { |
| 252 | /* write then read from same address */ |
| 253 | retval = i2c_sendbytes(i2c_adap, &msgs[i], |
| 254 | msgs[i + 1].len); |
| 255 | if (retval < 0) |
| 256 | goto err; |
| 257 | i++; |
| 258 | retval = i2c_readbytes(i2c_adap, &msgs[i], 1); |
| 259 | } else { |
| 260 | /* write */ |
| 261 | retval = i2c_sendbytes(i2c_adap, &msgs[i], 0); |
| 262 | } |
| 263 | if (retval < 0) |
| 264 | goto err; |
| 265 | } |
| 266 | return num; |
| 267 | |
| 268 | err: |
| 269 | return retval; |
| 270 | } |
| 271 | |
| 272 | static int attach_inform(struct i2c_client *client) |
| 273 | { |
| 274 | dprintk(1, "%s i2c attach [addr=0x%x,client=%s]\n", |
| 275 | client->driver->driver.name, client->addr, client->name); |
| 276 | |
| 277 | if (!client->driver->command) |
| 278 | return 0; |
| 279 | |
| 280 | return 0; |
| 281 | } |
| 282 | |
| 283 | static int detach_inform(struct i2c_client *client) |
| 284 | { |
| 285 | dprintk(1, "i2c detach [client=%s]\n", client->name); |
| 286 | |
| 287 | return 0; |
| 288 | } |
| 289 | |
| 290 | void au0828_call_i2c_clients(struct au0828_dev *dev, |
| 291 | unsigned int cmd, void *arg) |
| 292 | { |
| 293 | if (dev->i2c_rc != 0) |
| 294 | return; |
| 295 | |
| 296 | i2c_clients_command(&dev->i2c_adap, cmd, arg); |
| 297 | } |
| 298 | |
| 299 | static u32 au0828_functionality(struct i2c_adapter *adap) |
| 300 | { |
| 301 | return I2C_FUNC_SMBUS_EMUL | I2C_FUNC_I2C; |
| 302 | } |
| 303 | |
| 304 | static struct i2c_algorithm au0828_i2c_algo_template = { |
| 305 | .master_xfer = i2c_xfer, |
| 306 | .functionality = au0828_functionality, |
| 307 | }; |
| 308 | |
| 309 | /* ----------------------------------------------------------------------- */ |
| 310 | |
| 311 | static struct i2c_adapter au0828_i2c_adap_template = { |
| 312 | .name = DRIVER_NAME, |
| 313 | .owner = THIS_MODULE, |
| 314 | .id = I2C_HW_B_AU0828, |
| 315 | .algo = &au0828_i2c_algo_template, |
| 316 | .class = I2C_CLASS_TV_ANALOG, |
| 317 | .client_register = attach_inform, |
| 318 | .client_unregister = detach_inform, |
| 319 | }; |
| 320 | |
| 321 | static struct i2c_client au0828_i2c_client_template = { |
| 322 | .name = "au0828 internal", |
| 323 | }; |
| 324 | |
| 325 | static char *i2c_devs[128] = { |
| 326 | [ 0x8e >> 1 ] = "au8522", |
| 327 | [ 0xa0 >> 1 ] = "eeprom", |
| 328 | [ 0xc2 >> 1 ] = "tuner/xc5000", |
| 329 | }; |
| 330 | |
| 331 | static void do_i2c_scan(char *name, struct i2c_client *c) |
| 332 | { |
| 333 | unsigned char buf; |
| 334 | int i, rc; |
| 335 | |
| 336 | for (i = 0; i < 128; i++) { |
| 337 | c->addr = i; |
| 338 | rc = i2c_master_recv(c, &buf, 0); |
| 339 | if (rc < 0) |
| 340 | continue; |
| 341 | printk("%s: i2c scan: found device @ 0x%x [%s]\n", |
| 342 | name, i << 1, i2c_devs[i] ? i2c_devs[i] : "???"); |
| 343 | } |
| 344 | } |
| 345 | |
| 346 | /* init + register i2c algo-bit adapter */ |
| 347 | int au0828_i2c_register(struct au0828_dev *dev) |
| 348 | { |
Michael Krufky | f07e8e4 | 2008-04-18 21:42:30 -0300 | [diff] [blame] | 349 | dprintk(1, "%s()\n", __func__); |
Steven Toth | 265a651 | 2008-04-18 21:34:00 -0300 | [diff] [blame] | 350 | |
| 351 | memcpy(&dev->i2c_adap, &au0828_i2c_adap_template, |
| 352 | sizeof(dev->i2c_adap)); |
| 353 | memcpy(&dev->i2c_algo, &au0828_i2c_algo_template, |
| 354 | sizeof(dev->i2c_algo)); |
| 355 | memcpy(&dev->i2c_client, &au0828_i2c_client_template, |
| 356 | sizeof(dev->i2c_client)); |
| 357 | |
| 358 | dev->i2c_adap.dev.parent = &dev->usbdev->dev; |
| 359 | |
| 360 | strlcpy(dev->i2c_adap.name, DRIVER_NAME, |
| 361 | sizeof(dev->i2c_adap.name)); |
| 362 | |
| 363 | dev->i2c_algo.data = dev; |
| 364 | dev->i2c_adap.algo_data = dev; |
| 365 | i2c_set_adapdata(&dev->i2c_adap, dev); |
| 366 | i2c_add_adapter(&dev->i2c_adap); |
| 367 | |
| 368 | dev->i2c_client.adapter = &dev->i2c_adap; |
| 369 | |
| 370 | if (0 == dev->i2c_rc) { |
| 371 | printk("%s: i2c bus registered\n", DRIVER_NAME); |
| 372 | if (i2c_scan) |
| 373 | do_i2c_scan(DRIVER_NAME, &dev->i2c_client); |
| 374 | } else |
| 375 | printk("%s: i2c bus register FAILED\n", DRIVER_NAME); |
Steven Toth | bc3c613 | 2008-04-18 21:39:11 -0300 | [diff] [blame] | 376 | |
Steven Toth | 265a651 | 2008-04-18 21:34:00 -0300 | [diff] [blame] | 377 | return dev->i2c_rc; |
| 378 | } |
| 379 | |
| 380 | int au0828_i2c_unregister(struct au0828_dev *dev) |
| 381 | { |
| 382 | i2c_del_adapter(&dev->i2c_adap); |
| 383 | return 0; |
| 384 | } |
| 385 | |