blob: cdd1f35636dd246e69db01f073445ae3523ba47f [file] [log] [blame]
Paul Walmsley69d88a02008-03-18 10:02:50 +02001/*
2 * OMAP2/3 System Control Module register access
3 *
4 * Copyright (C) 2007 Texas Instruments, Inc.
5 * Copyright (C) 2007 Nokia Corporation
6 *
7 * Written by Paul Walmsley
8 *
9 * This program is free software; you can redistribute it and/or modify
10 * it under the terms of the GNU General Public License version 2 as
11 * published by the Free Software Foundation.
12 */
13#undef DEBUG
14
15#include <linux/kernel.h>
Tony Lindgrena58caad2008-07-03 12:24:44 +030016#include <linux/io.h>
Paul Walmsley69d88a02008-03-18 10:02:50 +020017
Tony Lindgrence491cf2009-10-20 09:40:47 -070018#include <plat/common.h>
19#include <plat/control.h>
Rajendra Nayak801407862008-09-26 17:48:46 +053020#include <plat/sdrc.h>
21#include "cm-regbits-34xx.h"
22#include "prm-regbits-34xx.h"
23#include "cm.h"
24#include "prm.h"
25#include "sdrc.h"
Paul Walmsley69d88a02008-03-18 10:02:50 +020026
Tony Lindgrena58caad2008-07-03 12:24:44 +030027static void __iomem *omap2_ctrl_base;
Paul Walmsley69d88a02008-03-18 10:02:50 +020028
Rajendra Nayakc96631e2008-09-26 17:49:02 +053029#if defined(CONFIG_ARCH_OMAP3) && defined(CONFIG_PM)
Rajendra Nayak801407862008-09-26 17:48:46 +053030struct omap3_scratchpad {
31 u32 boot_config_ptr;
32 u32 public_restore_ptr;
33 u32 secure_ram_restore_ptr;
34 u32 sdrc_module_semaphore;
35 u32 prcm_block_offset;
36 u32 sdrc_block_offset;
37};
38
39struct omap3_scratchpad_prcm_block {
40 u32 prm_clksrc_ctrl;
41 u32 prm_clksel;
42 u32 cm_clksel_core;
43 u32 cm_clksel_wkup;
44 u32 cm_clken_pll;
45 u32 cm_autoidle_pll;
46 u32 cm_clksel1_pll;
47 u32 cm_clksel2_pll;
48 u32 cm_clksel3_pll;
49 u32 cm_clken_pll_mpu;
50 u32 cm_autoidle_pll_mpu;
51 u32 cm_clksel1_pll_mpu;
52 u32 cm_clksel2_pll_mpu;
53 u32 prcm_block_size;
54};
55
56struct omap3_scratchpad_sdrc_block {
57 u16 sysconfig;
58 u16 cs_cfg;
59 u16 sharing;
60 u16 err_type;
61 u32 dll_a_ctrl;
62 u32 dll_b_ctrl;
63 u32 power;
64 u32 cs_0;
65 u32 mcfg_0;
66 u16 mr_0;
67 u16 emr_1_0;
68 u16 emr_2_0;
69 u16 emr_3_0;
70 u32 actim_ctrla_0;
71 u32 actim_ctrlb_0;
72 u32 rfr_ctrl_0;
73 u32 cs_1;
74 u32 mcfg_1;
75 u16 mr_1;
76 u16 emr_1_1;
77 u16 emr_2_1;
78 u16 emr_3_1;
79 u32 actim_ctrla_1;
80 u32 actim_ctrlb_1;
81 u32 rfr_ctrl_1;
82 u16 dcdl_1_ctrl;
83 u16 dcdl_2_ctrl;
84 u32 flags;
85 u32 block_size;
86};
87
Tero Kristo27d59a42008-10-13 13:15:00 +030088void *omap3_secure_ram_storage;
89
Rajendra Nayak801407862008-09-26 17:48:46 +053090/*
91 * This is used to store ARM registers in SDRAM before attempting
92 * an MPU OFF. The save and restore happens from the SRAM sleep code.
93 * The address is stored in scratchpad, so that it can be used
94 * during the restore path.
95 */
96u32 omap3_arm_context[128];
97
Rajendra Nayakc96631e2008-09-26 17:49:02 +053098struct omap3_control_regs {
99 u32 sysconfig;
100 u32 devconf0;
101 u32 mem_dftrw0;
102 u32 mem_dftrw1;
103 u32 msuspendmux_0;
104 u32 msuspendmux_1;
105 u32 msuspendmux_2;
106 u32 msuspendmux_3;
107 u32 msuspendmux_4;
108 u32 msuspendmux_5;
109 u32 sec_ctrl;
110 u32 devconf1;
111 u32 csirxfe;
112 u32 iva2_bootaddr;
113 u32 iva2_bootmod;
114 u32 debobs_0;
115 u32 debobs_1;
116 u32 debobs_2;
117 u32 debobs_3;
118 u32 debobs_4;
119 u32 debobs_5;
120 u32 debobs_6;
121 u32 debobs_7;
122 u32 debobs_8;
123 u32 prog_io0;
124 u32 prog_io1;
125 u32 dss_dpll_spreading;
126 u32 core_dpll_spreading;
127 u32 per_dpll_spreading;
128 u32 usbhost_dpll_spreading;
129 u32 pbias_lite;
130 u32 temp_sensor;
131 u32 sramldo4;
132 u32 sramldo5;
133 u32 csi;
134};
135
136static struct omap3_control_regs control_context;
137#endif /* CONFIG_ARCH_OMAP3 && CONFIG_PM */
138
Tony Lindgrena58caad2008-07-03 12:24:44 +0300139#define OMAP_CTRL_REGADDR(reg) (omap2_ctrl_base + (reg))
Paul Walmsley69d88a02008-03-18 10:02:50 +0200140
Tony Lindgrena58caad2008-07-03 12:24:44 +0300141void __init omap2_set_globals_control(struct omap_globals *omap2_globals)
Paul Walmsley69d88a02008-03-18 10:02:50 +0200142{
Tony Lindgrena58caad2008-07-03 12:24:44 +0300143 omap2_ctrl_base = omap2_globals->ctrl;
Paul Walmsley69d88a02008-03-18 10:02:50 +0200144}
145
Tony Lindgrena58caad2008-07-03 12:24:44 +0300146void __iomem *omap_ctrl_base_get(void)
Paul Walmsley69d88a02008-03-18 10:02:50 +0200147{
148 return omap2_ctrl_base;
149}
150
151u8 omap_ctrl_readb(u16 offset)
152{
153 return __raw_readb(OMAP_CTRL_REGADDR(offset));
154}
155
156u16 omap_ctrl_readw(u16 offset)
157{
158 return __raw_readw(OMAP_CTRL_REGADDR(offset));
159}
160
161u32 omap_ctrl_readl(u16 offset)
162{
163 return __raw_readl(OMAP_CTRL_REGADDR(offset));
164}
165
166void omap_ctrl_writeb(u8 val, u16 offset)
167{
Paul Walmsley69d88a02008-03-18 10:02:50 +0200168 __raw_writeb(val, OMAP_CTRL_REGADDR(offset));
169}
170
171void omap_ctrl_writew(u16 val, u16 offset)
172{
Paul Walmsley69d88a02008-03-18 10:02:50 +0200173 __raw_writew(val, OMAP_CTRL_REGADDR(offset));
174}
175
176void omap_ctrl_writel(u32 val, u16 offset)
177{
Paul Walmsley69d88a02008-03-18 10:02:50 +0200178 __raw_writel(val, OMAP_CTRL_REGADDR(offset));
179}
180
Rajendra Nayakc96631e2008-09-26 17:49:02 +0530181#if defined(CONFIG_ARCH_OMAP3) && defined(CONFIG_PM)
Rajendra Nayak801407862008-09-26 17:48:46 +0530182/*
183 * Clears the scratchpad contents in case of cold boot-
184 * called during bootup
185 */
186void omap3_clear_scratchpad_contents(void)
187{
188 u32 max_offset = OMAP343X_SCRATCHPAD_ROM_OFFSET;
189 u32 *v_addr;
190 u32 offset = 0;
191 v_addr = OMAP2_L4_IO_ADDRESS(OMAP343X_SCRATCHPAD_ROM);
192 if (prm_read_mod_reg(OMAP3430_GR_MOD, OMAP3_PRM_RSTST_OFFSET) &
193 OMAP3430_GLOBAL_COLD_RST) {
194 for ( ; offset <= max_offset; offset += 0x4)
195 __raw_writel(0x0, (v_addr + offset));
196 prm_set_mod_reg_bits(OMAP3430_GLOBAL_COLD_RST, OMAP3430_GR_MOD,
197 OMAP3_PRM_RSTST_OFFSET);
198 }
199}
200
201/* Populate the scratchpad structure with restore structure */
202void omap3_save_scratchpad_contents(void)
203{
204 void * __iomem scratchpad_address;
205 u32 arm_context_addr;
206 struct omap3_scratchpad scratchpad_contents;
207 struct omap3_scratchpad_prcm_block prcm_block_contents;
208 struct omap3_scratchpad_sdrc_block sdrc_block_contents;
209
210 /* Populate the Scratchpad contents */
211 scratchpad_contents.boot_config_ptr = 0x0;
Tero Kristo0795a752008-10-13 17:58:50 +0300212 if (omap_rev() != OMAP3430_REV_ES3_0 &&
213 omap_rev() != OMAP3430_REV_ES3_1)
214 scratchpad_contents.public_restore_ptr =
215 virt_to_phys(get_restore_pointer());
216 else
217 scratchpad_contents.public_restore_ptr =
218 virt_to_phys(get_es3_restore_pointer());
Tero Kristo27d59a42008-10-13 13:15:00 +0300219 if (omap_type() == OMAP2_DEVICE_TYPE_GP)
220 scratchpad_contents.secure_ram_restore_ptr = 0x0;
221 else
222 scratchpad_contents.secure_ram_restore_ptr =
223 (u32) __pa(omap3_secure_ram_storage);
Rajendra Nayak801407862008-09-26 17:48:46 +0530224 scratchpad_contents.sdrc_module_semaphore = 0x0;
225 scratchpad_contents.prcm_block_offset = 0x2C;
226 scratchpad_contents.sdrc_block_offset = 0x64;
227
228 /* Populate the PRCM block contents */
229 prcm_block_contents.prm_clksrc_ctrl = prm_read_mod_reg(OMAP3430_GR_MOD,
230 OMAP3_PRM_CLKSRC_CTRL_OFFSET);
231 prcm_block_contents.prm_clksel = prm_read_mod_reg(OMAP3430_CCR_MOD,
232 OMAP3_PRM_CLKSEL_OFFSET);
233 prcm_block_contents.cm_clksel_core =
234 cm_read_mod_reg(CORE_MOD, CM_CLKSEL);
235 prcm_block_contents.cm_clksel_wkup =
236 cm_read_mod_reg(WKUP_MOD, CM_CLKSEL);
237 prcm_block_contents.cm_clken_pll =
Kalle Jokiniemicb0cb2b2009-05-12 14:02:16 +0300238 cm_read_mod_reg(PLL_MOD, CM_CLKEN);
Rajendra Nayak801407862008-09-26 17:48:46 +0530239 prcm_block_contents.cm_autoidle_pll =
240 cm_read_mod_reg(PLL_MOD, OMAP3430_CM_AUTOIDLE_PLL);
241 prcm_block_contents.cm_clksel1_pll =
242 cm_read_mod_reg(PLL_MOD, OMAP3430_CM_CLKSEL1_PLL);
243 prcm_block_contents.cm_clksel2_pll =
244 cm_read_mod_reg(PLL_MOD, OMAP3430_CM_CLKSEL2_PLL);
245 prcm_block_contents.cm_clksel3_pll =
246 cm_read_mod_reg(PLL_MOD, OMAP3430_CM_CLKSEL3);
247 prcm_block_contents.cm_clken_pll_mpu =
248 cm_read_mod_reg(MPU_MOD, OMAP3430_CM_CLKEN_PLL);
249 prcm_block_contents.cm_autoidle_pll_mpu =
250 cm_read_mod_reg(MPU_MOD, OMAP3430_CM_AUTOIDLE_PLL);
251 prcm_block_contents.cm_clksel1_pll_mpu =
252 cm_read_mod_reg(MPU_MOD, OMAP3430_CM_CLKSEL1_PLL);
253 prcm_block_contents.cm_clksel2_pll_mpu =
254 cm_read_mod_reg(MPU_MOD, OMAP3430_CM_CLKSEL2_PLL);
255 prcm_block_contents.prcm_block_size = 0x0;
256
257 /* Populate the SDRC block contents */
258 sdrc_block_contents.sysconfig =
259 (sdrc_read_reg(SDRC_SYSCONFIG) & 0xFFFF);
260 sdrc_block_contents.cs_cfg =
261 (sdrc_read_reg(SDRC_CS_CFG) & 0xFFFF);
262 sdrc_block_contents.sharing =
263 (sdrc_read_reg(SDRC_SHARING) & 0xFFFF);
264 sdrc_block_contents.err_type =
265 (sdrc_read_reg(SDRC_ERR_TYPE) & 0xFFFF);
266 sdrc_block_contents.dll_a_ctrl = sdrc_read_reg(SDRC_DLLA_CTRL);
267 sdrc_block_contents.dll_b_ctrl = 0x0;
Rajendra Nayakf265dc42009-06-09 22:30:41 +0530268 /*
269 * Due to a OMAP3 errata (1.142), on EMU/HS devices SRDC should
270 * be programed to issue automatic self refresh on timeout
271 * of AUTO_CNT = 1 prior to any transition to OFF mode.
272 */
273 if ((omap_type() != OMAP2_DEVICE_TYPE_GP)
274 && (omap_rev() >= OMAP3430_REV_ES3_0))
275 sdrc_block_contents.power = (sdrc_read_reg(SDRC_POWER) &
276 ~(SDRC_POWER_AUTOCOUNT_MASK|
277 SDRC_POWER_CLKCTRL_MASK)) |
278 (1 << SDRC_POWER_AUTOCOUNT_SHIFT) |
279 SDRC_SELF_REFRESH_ON_AUTOCOUNT;
280 else
281 sdrc_block_contents.power = sdrc_read_reg(SDRC_POWER);
282
Rajendra Nayak801407862008-09-26 17:48:46 +0530283 sdrc_block_contents.cs_0 = 0x0;
284 sdrc_block_contents.mcfg_0 = sdrc_read_reg(SDRC_MCFG_0);
285 sdrc_block_contents.mr_0 = (sdrc_read_reg(SDRC_MR_0) & 0xFFFF);
286 sdrc_block_contents.emr_1_0 = 0x0;
287 sdrc_block_contents.emr_2_0 = 0x0;
288 sdrc_block_contents.emr_3_0 = 0x0;
289 sdrc_block_contents.actim_ctrla_0 =
290 sdrc_read_reg(SDRC_ACTIM_CTRL_A_0);
291 sdrc_block_contents.actim_ctrlb_0 =
292 sdrc_read_reg(SDRC_ACTIM_CTRL_B_0);
293 sdrc_block_contents.rfr_ctrl_0 =
294 sdrc_read_reg(SDRC_RFR_CTRL_0);
295 sdrc_block_contents.cs_1 = 0x0;
296 sdrc_block_contents.mcfg_1 = sdrc_read_reg(SDRC_MCFG_1);
297 sdrc_block_contents.mr_1 = sdrc_read_reg(SDRC_MR_1) & 0xFFFF;
298 sdrc_block_contents.emr_1_1 = 0x0;
299 sdrc_block_contents.emr_2_1 = 0x0;
300 sdrc_block_contents.emr_3_1 = 0x0;
301 sdrc_block_contents.actim_ctrla_1 =
302 sdrc_read_reg(SDRC_ACTIM_CTRL_A_1);
303 sdrc_block_contents.actim_ctrlb_1 =
304 sdrc_read_reg(SDRC_ACTIM_CTRL_B_1);
305 sdrc_block_contents.rfr_ctrl_1 =
306 sdrc_read_reg(SDRC_RFR_CTRL_1);
307 sdrc_block_contents.dcdl_1_ctrl = 0x0;
308 sdrc_block_contents.dcdl_2_ctrl = 0x0;
309 sdrc_block_contents.flags = 0x0;
310 sdrc_block_contents.block_size = 0x0;
311
312 arm_context_addr = virt_to_phys(omap3_arm_context);
313
314 /* Copy all the contents to the scratchpad location */
315 scratchpad_address = OMAP2_L4_IO_ADDRESS(OMAP343X_SCRATCHPAD);
316 memcpy_toio(scratchpad_address, &scratchpad_contents,
317 sizeof(scratchpad_contents));
318 /* Scratchpad contents being 32 bits, a divide by 4 done here */
319 memcpy_toio(scratchpad_address +
320 scratchpad_contents.prcm_block_offset,
321 &prcm_block_contents, sizeof(prcm_block_contents));
322 memcpy_toio(scratchpad_address +
323 scratchpad_contents.sdrc_block_offset,
324 &sdrc_block_contents, sizeof(sdrc_block_contents));
325 /*
326 * Copies the address of the location in SDRAM where ARM
327 * registers get saved during a MPU OFF transition.
328 */
329 memcpy_toio(scratchpad_address +
330 scratchpad_contents.sdrc_block_offset +
331 sizeof(sdrc_block_contents), &arm_context_addr, 4);
332}
333
Rajendra Nayakc96631e2008-09-26 17:49:02 +0530334void omap3_control_save_context(void)
335{
336 control_context.sysconfig = omap_ctrl_readl(OMAP2_CONTROL_SYSCONFIG);
337 control_context.devconf0 = omap_ctrl_readl(OMAP2_CONTROL_DEVCONF0);
338 control_context.mem_dftrw0 =
339 omap_ctrl_readl(OMAP343X_CONTROL_MEM_DFTRW0);
340 control_context.mem_dftrw1 =
341 omap_ctrl_readl(OMAP343X_CONTROL_MEM_DFTRW1);
342 control_context.msuspendmux_0 =
343 omap_ctrl_readl(OMAP2_CONTROL_MSUSPENDMUX_0);
344 control_context.msuspendmux_1 =
345 omap_ctrl_readl(OMAP2_CONTROL_MSUSPENDMUX_1);
346 control_context.msuspendmux_2 =
347 omap_ctrl_readl(OMAP2_CONTROL_MSUSPENDMUX_2);
348 control_context.msuspendmux_3 =
349 omap_ctrl_readl(OMAP2_CONTROL_MSUSPENDMUX_3);
350 control_context.msuspendmux_4 =
351 omap_ctrl_readl(OMAP2_CONTROL_MSUSPENDMUX_4);
352 control_context.msuspendmux_5 =
353 omap_ctrl_readl(OMAP2_CONTROL_MSUSPENDMUX_5);
354 control_context.sec_ctrl = omap_ctrl_readl(OMAP2_CONTROL_SEC_CTRL);
355 control_context.devconf1 = omap_ctrl_readl(OMAP343X_CONTROL_DEVCONF1);
356 control_context.csirxfe = omap_ctrl_readl(OMAP343X_CONTROL_CSIRXFE);
357 control_context.iva2_bootaddr =
358 omap_ctrl_readl(OMAP343X_CONTROL_IVA2_BOOTADDR);
359 control_context.iva2_bootmod =
360 omap_ctrl_readl(OMAP343X_CONTROL_IVA2_BOOTMOD);
361 control_context.debobs_0 = omap_ctrl_readl(OMAP343X_CONTROL_DEBOBS(0));
362 control_context.debobs_1 = omap_ctrl_readl(OMAP343X_CONTROL_DEBOBS(1));
363 control_context.debobs_2 = omap_ctrl_readl(OMAP343X_CONTROL_DEBOBS(2));
364 control_context.debobs_3 = omap_ctrl_readl(OMAP343X_CONTROL_DEBOBS(3));
365 control_context.debobs_4 = omap_ctrl_readl(OMAP343X_CONTROL_DEBOBS(4));
366 control_context.debobs_5 = omap_ctrl_readl(OMAP343X_CONTROL_DEBOBS(5));
367 control_context.debobs_6 = omap_ctrl_readl(OMAP343X_CONTROL_DEBOBS(6));
368 control_context.debobs_7 = omap_ctrl_readl(OMAP343X_CONTROL_DEBOBS(7));
369 control_context.debobs_8 = omap_ctrl_readl(OMAP343X_CONTROL_DEBOBS(8));
370 control_context.prog_io0 = omap_ctrl_readl(OMAP343X_CONTROL_PROG_IO0);
371 control_context.prog_io1 = omap_ctrl_readl(OMAP343X_CONTROL_PROG_IO1);
372 control_context.dss_dpll_spreading =
373 omap_ctrl_readl(OMAP343X_CONTROL_DSS_DPLL_SPREADING);
374 control_context.core_dpll_spreading =
375 omap_ctrl_readl(OMAP343X_CONTROL_CORE_DPLL_SPREADING);
376 control_context.per_dpll_spreading =
377 omap_ctrl_readl(OMAP343X_CONTROL_PER_DPLL_SPREADING);
378 control_context.usbhost_dpll_spreading =
379 omap_ctrl_readl(OMAP343X_CONTROL_USBHOST_DPLL_SPREADING);
380 control_context.pbias_lite =
381 omap_ctrl_readl(OMAP343X_CONTROL_PBIAS_LITE);
382 control_context.temp_sensor =
383 omap_ctrl_readl(OMAP343X_CONTROL_TEMP_SENSOR);
384 control_context.sramldo4 = omap_ctrl_readl(OMAP343X_CONTROL_SRAMLDO4);
385 control_context.sramldo5 = omap_ctrl_readl(OMAP343X_CONTROL_SRAMLDO5);
386 control_context.csi = omap_ctrl_readl(OMAP343X_CONTROL_CSI);
387 return;
388}
389
390void omap3_control_restore_context(void)
391{
392 omap_ctrl_writel(control_context.sysconfig, OMAP2_CONTROL_SYSCONFIG);
393 omap_ctrl_writel(control_context.devconf0, OMAP2_CONTROL_DEVCONF0);
394 omap_ctrl_writel(control_context.mem_dftrw0,
395 OMAP343X_CONTROL_MEM_DFTRW0);
396 omap_ctrl_writel(control_context.mem_dftrw1,
397 OMAP343X_CONTROL_MEM_DFTRW1);
398 omap_ctrl_writel(control_context.msuspendmux_0,
399 OMAP2_CONTROL_MSUSPENDMUX_0);
400 omap_ctrl_writel(control_context.msuspendmux_1,
401 OMAP2_CONTROL_MSUSPENDMUX_1);
402 omap_ctrl_writel(control_context.msuspendmux_2,
403 OMAP2_CONTROL_MSUSPENDMUX_2);
404 omap_ctrl_writel(control_context.msuspendmux_3,
405 OMAP2_CONTROL_MSUSPENDMUX_3);
406 omap_ctrl_writel(control_context.msuspendmux_4,
407 OMAP2_CONTROL_MSUSPENDMUX_4);
408 omap_ctrl_writel(control_context.msuspendmux_5,
409 OMAP2_CONTROL_MSUSPENDMUX_5);
410 omap_ctrl_writel(control_context.sec_ctrl, OMAP2_CONTROL_SEC_CTRL);
411 omap_ctrl_writel(control_context.devconf1, OMAP343X_CONTROL_DEVCONF1);
412 omap_ctrl_writel(control_context.csirxfe, OMAP343X_CONTROL_CSIRXFE);
413 omap_ctrl_writel(control_context.iva2_bootaddr,
414 OMAP343X_CONTROL_IVA2_BOOTADDR);
415 omap_ctrl_writel(control_context.iva2_bootmod,
416 OMAP343X_CONTROL_IVA2_BOOTMOD);
417 omap_ctrl_writel(control_context.debobs_0, OMAP343X_CONTROL_DEBOBS(0));
418 omap_ctrl_writel(control_context.debobs_1, OMAP343X_CONTROL_DEBOBS(1));
419 omap_ctrl_writel(control_context.debobs_2, OMAP343X_CONTROL_DEBOBS(2));
420 omap_ctrl_writel(control_context.debobs_3, OMAP343X_CONTROL_DEBOBS(3));
421 omap_ctrl_writel(control_context.debobs_4, OMAP343X_CONTROL_DEBOBS(4));
422 omap_ctrl_writel(control_context.debobs_5, OMAP343X_CONTROL_DEBOBS(5));
423 omap_ctrl_writel(control_context.debobs_6, OMAP343X_CONTROL_DEBOBS(6));
424 omap_ctrl_writel(control_context.debobs_7, OMAP343X_CONTROL_DEBOBS(7));
425 omap_ctrl_writel(control_context.debobs_8, OMAP343X_CONTROL_DEBOBS(8));
426 omap_ctrl_writel(control_context.prog_io0, OMAP343X_CONTROL_PROG_IO0);
427 omap_ctrl_writel(control_context.prog_io1, OMAP343X_CONTROL_PROG_IO1);
428 omap_ctrl_writel(control_context.dss_dpll_spreading,
429 OMAP343X_CONTROL_DSS_DPLL_SPREADING);
430 omap_ctrl_writel(control_context.core_dpll_spreading,
431 OMAP343X_CONTROL_CORE_DPLL_SPREADING);
432 omap_ctrl_writel(control_context.per_dpll_spreading,
433 OMAP343X_CONTROL_PER_DPLL_SPREADING);
434 omap_ctrl_writel(control_context.usbhost_dpll_spreading,
435 OMAP343X_CONTROL_USBHOST_DPLL_SPREADING);
436 omap_ctrl_writel(control_context.pbias_lite,
437 OMAP343X_CONTROL_PBIAS_LITE);
438 omap_ctrl_writel(control_context.temp_sensor,
439 OMAP343X_CONTROL_TEMP_SENSOR);
440 omap_ctrl_writel(control_context.sramldo4, OMAP343X_CONTROL_SRAMLDO4);
441 omap_ctrl_writel(control_context.sramldo5, OMAP343X_CONTROL_SRAMLDO5);
442 omap_ctrl_writel(control_context.csi, OMAP343X_CONTROL_CSI);
443 return;
444}
445#endif /* CONFIG_ARCH_OMAP3 && CONFIG_PM */