Takashi Iwai | bbda14d | 2008-10-30 15:57:05 +0100 | [diff] [blame] | 1 | menuconfig REGULATOR |
Liam Girdwood | ba7e476 | 2008-04-30 17:13:42 +0100 | [diff] [blame] | 2 | bool "Voltage and Current Regulator Support" |
Liam Girdwood | ba7e476 | 2008-04-30 17:13:42 +0100 | [diff] [blame] | 3 | help |
| 4 | Generic Voltage and Current Regulator support. |
| 5 | |
| 6 | This framework is designed to provide a generic interface to voltage |
| 7 | and current regulators within the Linux kernel. It's intended to |
| 8 | provide voltage and current control to client or consumer drivers and |
| 9 | also provide status information to user space applications through a |
| 10 | sysfs interface. |
| 11 | |
| 12 | The intention is to allow systems to dynamically control regulator |
| 13 | output in order to save power and prolong battery life. This applies |
| 14 | to both voltage regulators (where voltage output is controllable) and |
| 15 | current sinks (where current output is controllable). |
| 16 | |
| 17 | This framework safely compiles out if not selected so that client |
| 18 | drivers can still be used in systems with no software controllable |
| 19 | regulators. |
| 20 | |
| 21 | If unsure, say no. |
| 22 | |
Mark Brown | 809d310 | 2012-06-20 11:08:43 +0100 | [diff] [blame] | 23 | |
Takashi Iwai | bbda14d | 2008-10-30 15:57:05 +0100 | [diff] [blame] | 24 | if REGULATOR |
| 25 | |
Liam Girdwood | ba7e476 | 2008-04-30 17:13:42 +0100 | [diff] [blame] | 26 | config REGULATOR_DEBUG |
| 27 | bool "Regulator debug support" |
Liam Girdwood | ba7e476 | 2008-04-30 17:13:42 +0100 | [diff] [blame] | 28 | help |
| 29 | Say yes here to enable debugging support. |
| 30 | |
| 31 | config REGULATOR_FIXED_VOLTAGE |
Mark Brown | a9cb63b | 2009-01-19 13:37:05 +0000 | [diff] [blame] | 32 | tristate "Fixed voltage regulator support" |
Mark Brown | a9cb63b | 2009-01-19 13:37:05 +0000 | [diff] [blame] | 33 | help |
| 34 | This driver provides support for fixed voltage regulators, |
| 35 | useful for systems which use a combination of software |
| 36 | managed regulators and simple non-configurable regulators. |
Liam Girdwood | ba7e476 | 2008-04-30 17:13:42 +0100 | [diff] [blame] | 37 | |
| 38 | config REGULATOR_VIRTUAL_CONSUMER |
| 39 | tristate "Virtual regulator consumer support" |
Liam Girdwood | ba7e476 | 2008-04-30 17:13:42 +0100 | [diff] [blame] | 40 | help |
| 41 | This driver provides a virtual consumer for the voltage and |
Michael Jones | c6d678b | 2012-07-26 16:07:23 +0200 | [diff] [blame] | 42 | current regulator API which provides sysfs controls for |
| 43 | configuring the supplies requested. This is mainly useful |
| 44 | for test purposes. |
Liam Girdwood | ba7e476 | 2008-04-30 17:13:42 +0100 | [diff] [blame] | 45 | |
Michael Jones | c6d678b | 2012-07-26 16:07:23 +0200 | [diff] [blame] | 46 | If unsure, say no. |
Liam Girdwood | ba7e476 | 2008-04-30 17:13:42 +0100 | [diff] [blame] | 47 | |
Mike Rapoport | 1d98ccc | 2009-04-26 16:49:39 +0300 | [diff] [blame] | 48 | config REGULATOR_USERSPACE_CONSUMER |
| 49 | tristate "Userspace regulator consumer support" |
Mike Rapoport | 1d98ccc | 2009-04-26 16:49:39 +0300 | [diff] [blame] | 50 | help |
| 51 | There are some classes of devices that are controlled entirely |
Michael Prokop | 6f2653e | 2009-09-05 02:59:14 +0200 | [diff] [blame] | 52 | from user space. Userspace consumer driver provides ability to |
Mike Rapoport | 1d98ccc | 2009-04-26 16:49:39 +0300 | [diff] [blame] | 53 | control power supplies for such devices. |
| 54 | |
Michael Jones | c6d678b | 2012-07-26 16:07:23 +0200 | [diff] [blame] | 55 | If unsure, say no. |
Mike Rapoport | 1d98ccc | 2009-04-26 16:49:39 +0300 | [diff] [blame] | 56 | |
Chao Xie | 95f1dc0 | 2013-07-17 23:07:03 -0400 | [diff] [blame] | 57 | config REGULATOR_88PM800 |
| 58 | tristate "Marvell 88PM800 Power regulators" |
Axel Lin | 7c45f60 | 2013-07-19 09:17:53 +0800 | [diff] [blame] | 59 | depends on MFD_88PM800 |
Chao Xie | 95f1dc0 | 2013-07-17 23:07:03 -0400 | [diff] [blame] | 60 | help |
| 61 | This driver supports Marvell 88PM800 voltage regulator chips. |
| 62 | It delivers digitally programmable output, |
| 63 | the voltage is programmed via I2C interface. |
| 64 | It's suitable to support PXA988 chips to control VCC_MAIN and |
| 65 | various voltages. |
| 66 | |
Mark Brown | 82b736d | 2013-07-05 20:45:22 +0100 | [diff] [blame] | 67 | config REGULATOR_88PM8607 |
Mark Brown | 631a1fc | 2013-07-29 16:49:46 +0100 | [diff] [blame] | 68 | tristate "Marvell 88PM8607 Power regulators" |
Mark Brown | 82b736d | 2013-07-05 20:45:22 +0100 | [diff] [blame] | 69 | depends on MFD_88PM860X=y |
Heiko Stübner | 3f0292a | 2011-10-05 12:27:05 +0200 | [diff] [blame] | 70 | help |
Mark Brown | 82b736d | 2013-07-05 20:45:22 +0100 | [diff] [blame] | 71 | This driver supports 88PM8607 voltage regulator chips. |
Heiko Stübner | 3f0292a | 2011-10-05 12:27:05 +0200 | [diff] [blame] | 72 | |
Wenyou Yang | 33036f4 | 2013-12-24 10:34:28 +0800 | [diff] [blame] | 73 | config REGULATOR_ACT8865 |
| 74 | tristate "Active-semi act8865 voltage regulator" |
| 75 | depends on I2C |
| 76 | select REGMAP_I2C |
| 77 | help |
| 78 | This driver controls a active-semi act8865 voltage output |
| 79 | regulator via I2C bus. |
| 80 | |
Axel Lin | dfb9b8a | 2012-02-22 09:29:16 +0800 | [diff] [blame] | 81 | config REGULATOR_AD5398 |
| 82 | tristate "Analog Devices AD5398/AD5821 regulators" |
| 83 | depends on I2C |
Philipp Zabel | 0eb5d5a | 2008-07-11 17:28:06 +0200 | [diff] [blame] | 84 | help |
Axel Lin | dfb9b8a | 2012-02-22 09:29:16 +0800 | [diff] [blame] | 85 | This driver supports AD5398 and AD5821 current regulator chips. |
| 86 | If building into module, its name is ad5398.ko. |
| 87 | |
Mark Brown | 82b736d | 2013-07-05 20:45:22 +0100 | [diff] [blame] | 88 | config REGULATOR_ANATOP |
| 89 | tristate "Freescale i.MX on-chip ANATOP LDO regulators" |
| 90 | depends on MFD_SYSCON |
| 91 | help |
| 92 | Say y here to support Freescale i.MX on-chip ANATOP LDOs |
| 93 | regulators. It is recommended that this option be |
| 94 | enabled on i.MX6 platform. |
| 95 | |
Axel Lin | dfb9b8a | 2012-02-22 09:29:16 +0800 | [diff] [blame] | 96 | config REGULATOR_AAT2870 |
| 97 | tristate "AnalogicTech AAT2870 Regulators" |
| 98 | depends on MFD_AAT2870_CORE |
| 99 | help |
| 100 | If you have a AnalogicTech AAT2870 say Y to enable the |
| 101 | regulator driver. |
| 102 | |
Mark Brown | 82b736d | 2013-07-05 20:45:22 +0100 | [diff] [blame] | 103 | config REGULATOR_AB3100 |
| 104 | tristate "ST-Ericsson AB3100 Regulator functions" |
| 105 | depends on AB3100_CORE |
| 106 | default y if AB3100_CORE |
| 107 | help |
| 108 | These regulators correspond to functionality in the |
| 109 | AB3100 analog baseband dealing with power regulators |
| 110 | for the system. |
| 111 | |
| 112 | config REGULATOR_AB8500 |
| 113 | bool "ST-Ericsson AB8500 Power Regulators" |
| 114 | depends on AB8500_CORE |
| 115 | help |
| 116 | This driver supports the regulators found on the ST-Ericsson mixed |
| 117 | signal AB8500 PMIC |
| 118 | |
Mark Brown | b667a45 | 2012-06-14 18:14:00 +0100 | [diff] [blame] | 119 | config REGULATOR_ARIZONA |
| 120 | tristate "Wolfson Arizona class devices" |
| 121 | depends on MFD_ARIZONA |
Mark Brown | e6ed905 | 2013-01-10 19:14:11 +0000 | [diff] [blame] | 122 | depends on SND_SOC |
Mark Brown | b667a45 | 2012-06-14 18:14:00 +0100 | [diff] [blame] | 123 | help |
| 124 | Support for the regulators found on Wolfson Arizona class |
| 125 | devices. |
| 126 | |
Mark Brown | 82b736d | 2013-07-05 20:45:22 +0100 | [diff] [blame] | 127 | config REGULATOR_AS3711 |
| 128 | tristate "AS3711 PMIC" |
| 129 | depends on MFD_AS3711 |
| 130 | help |
| 131 | This driver provides support for the voltage regulators on the |
| 132 | AS3711 PMIC |
| 133 | |
Laxman Dewangan | bc40733 | 2013-09-20 18:00:13 +0530 | [diff] [blame] | 134 | config REGULATOR_AS3722 |
| 135 | tristate "AMS AS3722 PMIC Regulators" |
| 136 | depends on MFD_AS3722 |
| 137 | help |
| 138 | This driver provides support for the voltage regulators on the |
| 139 | AS3722 PMIC. This will enable support for all the software |
| 140 | controllable DCDC/LDO regulators. |
| 141 | |
Carlo Caione | dfe7a1b | 2014-04-11 11:38:10 +0200 | [diff] [blame] | 142 | config REGULATOR_AXP20X |
| 143 | tristate "X-POWERS AXP20X PMIC Regulators" |
| 144 | depends on MFD_AXP20X |
| 145 | help |
| 146 | This driver provides support for the voltage regulators on the |
| 147 | AXP20X PMIC. |
| 148 | |
Matt Porter | 462c9fc | 2014-03-11 11:46:13 -0400 | [diff] [blame] | 149 | config REGULATOR_BCM590XX |
| 150 | tristate "Broadcom BCM590xx PMU Regulators" |
| 151 | depends on MFD_BCM590XX |
| 152 | help |
| 153 | This driver provides support for the voltage regulators on the |
| 154 | BCM590xx PMUs. This will enable support for the software |
| 155 | controllable LDO/Switching regulators. |
| 156 | |
Axel Lin | dfb9b8a | 2012-02-22 09:29:16 +0800 | [diff] [blame] | 157 | config REGULATOR_DA903X |
| 158 | tristate "Dialog Semiconductor DA9030/DA9034 regulators" |
| 159 | depends on PMIC_DA903X |
| 160 | help |
| 161 | Say y here to support the BUCKs and LDOs regulators found on |
| 162 | Dialog Semiconductor DA9030/DA9034 PMIC. |
| 163 | |
| 164 | config REGULATOR_DA9052 |
| 165 | tristate "Dialog Semiconductor DA9052/DA9053 regulators" |
| 166 | depends on PMIC_DA9052 |
| 167 | help |
| 168 | This driver supports the voltage regulators of DA9052-BC and |
| 169 | DA9053-AA/Bx PMIC. |
| 170 | |
Ashish Jangam | f6130be | 2012-11-01 13:57:56 +0530 | [diff] [blame] | 171 | config REGULATOR_DA9055 |
| 172 | tristate "Dialog Semiconductor DA9055 regulators" |
| 173 | depends on MFD_DA9055 |
| 174 | help |
| 175 | Say y here to support the BUCKs and LDOs regulators found on |
| 176 | Dialog Semiconductor DA9055 PMIC. |
| 177 | |
| 178 | This driver can also be built as a module. If so, the module |
| 179 | will be called da9055-regulator. |
| 180 | |
S Twiss | 4068e51 | 2015-05-19 14:10:30 +0100 | [diff] [blame] | 181 | config REGULATOR_DA9062 |
| 182 | tristate "Dialog Semiconductor DA9062 regulators" |
| 183 | depends on MFD_DA9062 |
| 184 | help |
| 185 | Say y here to support the BUCKs and LDOs regulators found on |
| 186 | DA9062 PMICs. |
| 187 | |
| 188 | This driver can also be built as a module. If so, the module |
| 189 | will be called da9062-regulator. |
| 190 | |
Krystian Garbaciak | 69ca3e5 | 2013-07-29 19:00:45 +0200 | [diff] [blame] | 191 | config REGULATOR_DA9063 |
| 192 | tristate "Dialog Semiconductor DA9063 regulators" |
| 193 | depends on MFD_DA9063 |
| 194 | help |
| 195 | Say y here to support the BUCKs and LDOs regulators found on |
| 196 | DA9063 PMICs. |
| 197 | |
| 198 | This driver can also be built as a module. If so, the module |
| 199 | will be called da9063-regulator. |
| 200 | |
Steve Twiss | 16f1091 | 2013-08-06 15:30:48 +0100 | [diff] [blame] | 201 | config REGULATOR_DA9210 |
| 202 | tristate "Dialog Semiconductor DA9210 regulator" |
| 203 | depends on I2C |
| 204 | select REGMAP_I2C |
| 205 | help |
| 206 | Say y here to support for the Dialog Semiconductor DA9210. |
| 207 | The DA9210 is a multi-phase synchronous step down |
| 208 | converter 12A DC-DC Buck controlled through an I2C |
| 209 | interface. |
| 210 | |
James Ban | 1028a37 | 2014-07-14 13:48:45 +0900 | [diff] [blame] | 211 | config REGULATOR_DA9211 |
James Ban | 7bd3935 | 2015-06-30 13:39:39 +0900 | [diff] [blame] | 212 | tristate "Dialog Semiconductor DA9211/DA9212/DA9213/DA9214/DA9215 regulator" |
James Ban | 1028a37 | 2014-07-14 13:48:45 +0900 | [diff] [blame] | 213 | depends on I2C |
| 214 | select REGMAP_I2C |
| 215 | help |
James Ban | 005547e | 2014-08-08 14:27:04 +0900 | [diff] [blame] | 216 | Say y here to support for the Dialog Semiconductor DA9211/DA9212 |
James Ban | 7bd3935 | 2015-06-30 13:39:39 +0900 | [diff] [blame] | 217 | /DA9213/DA9214/DA9215. |
| 218 | The DA9211/DA9212/DA9213/DA9214/DA9215 is a multi-phase synchronous |
James Ban | 005547e | 2014-08-08 14:27:04 +0900 | [diff] [blame] | 219 | step down converter 12A or 16A DC-DC Buck controlled through an I2C |
James Ban | 1028a37 | 2014-07-14 13:48:45 +0900 | [diff] [blame] | 220 | interface. |
| 221 | |
Mark Brown | 82b736d | 2013-07-05 20:45:22 +0100 | [diff] [blame] | 222 | config REGULATOR_DBX500_PRCMU |
| 223 | bool |
| 224 | |
| 225 | config REGULATOR_DB8500_PRCMU |
| 226 | bool "ST-Ericsson DB8500 Voltage Domain Regulators" |
| 227 | depends on MFD_DB8500_PRCMU |
| 228 | select REGULATOR_DBX500_PRCMU |
| 229 | help |
| 230 | This driver supports the voltage domain regulators controlled by the |
| 231 | DB8500 PRCMU |
| 232 | |
Yunfan Zhang | 49d8c59 | 2012-09-08 03:52:18 -0700 | [diff] [blame] | 233 | config REGULATOR_FAN53555 |
| 234 | tristate "Fairchild FAN53555 Regulator" |
| 235 | depends on I2C |
| 236 | select REGMAP_I2C |
| 237 | help |
| 238 | This driver supports Fairchild FAN53555 Digitally Programmable |
| 239 | TinyBuck Regulator. The FAN53555 is a step-down switching voltage |
| 240 | regulator that delivers a digitally programmable output from an |
| 241 | input voltage supply of 2.5V to 5.5V. The output voltage is |
| 242 | programmed through an I2C interface. |
| 243 | |
Mark Brown | 82b736d | 2013-07-05 20:45:22 +0100 | [diff] [blame] | 244 | config REGULATOR_GPIO |
| 245 | tristate "GPIO regulator support" |
Geert Uytterhoeven | 9eac5fd | 2015-05-05 18:32:32 +0200 | [diff] [blame] | 246 | depends on GPIOLIB || COMPILE_TEST |
Ying-Chun Liu (PaulLiu) | e3e5aff | 2012-03-14 10:29:12 +0800 | [diff] [blame] | 247 | help |
Mark Brown | 82b736d | 2013-07-05 20:45:22 +0100 | [diff] [blame] | 248 | This driver provides support for regulators that can be |
| 249 | controlled via gpios. |
| 250 | It is capable of supporting current and voltage regulators |
| 251 | and the platform has to provide a mapping of GPIO-states |
| 252 | to target volts/amps. |
Axel Lin | dfb9b8a | 2012-02-22 09:29:16 +0800 | [diff] [blame] | 253 | |
Guodong Xu | 87ca186 | 2014-08-13 19:33:42 +0800 | [diff] [blame] | 254 | config REGULATOR_HI6421 |
| 255 | tristate "HiSilicon Hi6421 PMIC voltage regulator support" |
| 256 | depends on MFD_HI6421_PMIC && OF |
| 257 | help |
| 258 | This driver provides support for the voltage regulators on the |
| 259 | HiSilicon Hi6421 PMU / Codec IC. |
| 260 | Hi6421 is a multi-function device which, on regulator part, provides |
| 261 | 21 general purpose LDOs, 3 dedicated LDOs, and 5 BUCKs. All |
| 262 | of them come with support to either ECO (idle) or sleep mode. |
| 263 | |
Mark Brown | dec38b5 | 2014-09-06 01:11:12 +0100 | [diff] [blame] | 264 | config REGULATOR_ISL9305 |
| 265 | tristate "Intersil ISL9305 regulator" |
| 266 | depends on I2C |
Axel Lin | ba441ec | 2014-09-10 08:44:36 +0800 | [diff] [blame] | 267 | select REGMAP_I2C |
Mark Brown | dec38b5 | 2014-09-06 01:11:12 +0100 | [diff] [blame] | 268 | help |
| 269 | This driver supports ISL9305 voltage regulator chip. |
| 270 | |
Axel Lin | dfb9b8a | 2012-02-22 09:29:16 +0800 | [diff] [blame] | 271 | config REGULATOR_ISL6271A |
| 272 | tristate "Intersil ISL6271A Power regulator" |
| 273 | depends on I2C |
| 274 | help |
| 275 | This driver supports ISL6271A voltage regulator chip. |
| 276 | |
Milo Kim | 3a8d1a7 | 2015-11-26 15:57:05 +0900 | [diff] [blame] | 277 | config REGULATOR_LM363X |
| 278 | tristate "TI LM363X voltage regulators" |
| 279 | depends on MFD_TI_LMU |
| 280 | help |
| 281 | This driver supports LM3631 and LM3632 voltage regulators for |
| 282 | the LCD bias. |
| 283 | One boost output voltage is configurable and always on. |
| 284 | Other LDOs are used for the display module. |
| 285 | |
Mark Brown | 82b736d | 2013-07-05 20:45:22 +0100 | [diff] [blame] | 286 | config REGULATOR_LP3971 |
| 287 | tristate "National Semiconductors LP3971 PMIC regulator driver" |
| 288 | depends on I2C |
Axel Lin | dfb9b8a | 2012-02-22 09:29:16 +0800 | [diff] [blame] | 289 | help |
Mark Brown | 82b736d | 2013-07-05 20:45:22 +0100 | [diff] [blame] | 290 | Say Y here to support the voltage regulators and convertors |
| 291 | on National Semiconductors LP3971 PMIC |
| 292 | |
| 293 | config REGULATOR_LP3972 |
| 294 | tristate "National Semiconductors LP3972 PMIC regulator driver" |
| 295 | depends on I2C |
| 296 | help |
| 297 | Say Y here to support the voltage regulators and convertors |
| 298 | on National Semiconductors LP3972 PMIC |
| 299 | |
| 300 | config REGULATOR_LP872X |
Mark Brown | 631a1fc | 2013-07-29 16:49:46 +0100 | [diff] [blame] | 301 | tristate "TI/National Semiconductor LP8720/LP8725 voltage regulators" |
Axel Lin | 613965f | 2013-08-30 22:13:44 +0800 | [diff] [blame] | 302 | depends on I2C |
Mark Brown | 82b736d | 2013-07-05 20:45:22 +0100 | [diff] [blame] | 303 | select REGMAP_I2C |
| 304 | help |
| 305 | This driver supports LP8720/LP8725 PMIC |
| 306 | |
| 307 | config REGULATOR_LP8755 |
| 308 | tristate "TI LP8755 High Performance PMU driver" |
| 309 | depends on I2C |
| 310 | select REGMAP_I2C |
| 311 | help |
| 312 | This driver supports LP8755 High Performance PMU driver. This |
| 313 | chip contains six step-down DC/DC converters which can support |
| 314 | 9 mode multiphase configuration. |
| 315 | |
| 316 | config REGULATOR_LP8788 |
Mark Brown | 631a1fc | 2013-07-29 16:49:46 +0100 | [diff] [blame] | 317 | tristate "TI LP8788 Power Regulators" |
Mark Brown | 82b736d | 2013-07-05 20:45:22 +0100 | [diff] [blame] | 318 | depends on MFD_LP8788 |
| 319 | help |
| 320 | This driver supports LP8788 voltage regulator chip. |
Philipp Zabel | 0eb5d5a | 2008-07-11 17:28:06 +0200 | [diff] [blame] | 321 | |
Philipp Zabel | 3eb2c7e | 2014-05-26 10:38:16 +0200 | [diff] [blame] | 322 | config REGULATOR_LTC3589 |
Axel Lin | ac1d686 | 2014-05-27 13:51:49 +0800 | [diff] [blame] | 323 | tristate "LTC3589 8-output voltage regulator" |
| 324 | depends on I2C |
| 325 | select REGMAP_I2C |
Philipp Zabel | 3eb2c7e | 2014-05-26 10:38:16 +0200 | [diff] [blame] | 326 | help |
| 327 | This enables support for the LTC3589, LTC3589-1, and LTC3589-2 |
| 328 | 8-output regulators controlled via I2C. |
| 329 | |
Krzysztof Kozlowski | b0902bb | 2013-12-06 12:32:13 +0100 | [diff] [blame] | 330 | config REGULATOR_MAX14577 |
Krzysztof Kozlowski | 8a82b40 | 2014-04-14 11:17:20 +0200 | [diff] [blame] | 331 | tristate "Maxim 14577/77836 regulator" |
Krzysztof Kozlowski | b0902bb | 2013-12-06 12:32:13 +0100 | [diff] [blame] | 332 | depends on MFD_MAX14577 |
| 333 | help |
Krzysztof Kozlowski | 8a82b40 | 2014-04-14 11:17:20 +0200 | [diff] [blame] | 334 | This driver controls a Maxim MAX14577/77836 regulator via I2C bus. |
| 335 | The MAX14577 regulators include safeout LDO and charger current |
| 336 | regulator. The MAX77836 has two additional LDOs. |
Krzysztof Kozlowski | b0902bb | 2013-12-06 12:32:13 +0100 | [diff] [blame] | 337 | |
Robert Jarzmik | 55f4fa4 | 2009-04-23 20:10:43 +0200 | [diff] [blame] | 338 | config REGULATOR_MAX1586 |
| 339 | tristate "Maxim 1586/1587 voltage regulator" |
| 340 | depends on I2C |
Robert Jarzmik | 55f4fa4 | 2009-04-23 20:10:43 +0200 | [diff] [blame] | 341 | help |
| 342 | This driver controls a Maxim 1586 or 1587 voltage output |
| 343 | regulator via I2C bus. The provided regulator is suitable |
| 344 | for PXA27x chips to control VCC_CORE and VCC_USIM voltages. |
| 345 | |
Haojian Zhuang | a71b797 | 2010-01-25 10:24:09 -0500 | [diff] [blame] | 346 | config REGULATOR_MAX8649 |
| 347 | tristate "Maxim 8649 voltage regulator" |
| 348 | depends on I2C |
Jonghwan Choi | c5b68d47 | 2011-10-24 22:26:26 +0900 | [diff] [blame] | 349 | select REGMAP_I2C |
Haojian Zhuang | a71b797 | 2010-01-25 10:24:09 -0500 | [diff] [blame] | 350 | help |
| 351 | This driver controls a Maxim 8649 voltage output regulator via |
| 352 | I2C bus. |
| 353 | |
Wolfram Sang | 27f37e4 | 2009-09-25 09:39:26 +0200 | [diff] [blame] | 354 | config REGULATOR_MAX8660 |
| 355 | tristate "Maxim 8660/8661 voltage regulator" |
| 356 | depends on I2C |
| 357 | help |
| 358 | This driver controls a Maxim 8660/8661 voltage output |
| 359 | regulator via I2C bus. |
| 360 | |
Gyungoh Yoo | ffee190 | 2012-08-09 14:24:34 -0600 | [diff] [blame] | 361 | config REGULATOR_MAX8907 |
| 362 | tristate "Maxim 8907 voltage regulator" |
| 363 | depends on MFD_MAX8907 |
| 364 | help |
| 365 | This driver controls a Maxim 8907 voltage output regulator |
| 366 | via I2C bus. The provided regulator is suitable for Tegra |
| 367 | chip to control Step-Down DC-DC and LDOs. |
| 368 | |
Haojian Zhuang | 08ff6f2 | 2010-01-11 13:10:08 +0100 | [diff] [blame] | 369 | config REGULATOR_MAX8925 |
| 370 | tristate "Maxim MAX8925 Power Management IC" |
| 371 | depends on MFD_MAX8925 |
| 372 | help |
| 373 | Say y here to support the voltage regulaltor of Maxim MAX8925 PMIC. |
| 374 | |
MyungJoo Ham | 202f4f5 | 2010-08-20 14:43:56 +0900 | [diff] [blame] | 375 | config REGULATOR_MAX8952 |
| 376 | tristate "Maxim MAX8952 Power Management IC" |
| 377 | depends on I2C |
| 378 | help |
| 379 | This driver controls a Maxim 8952 voltage output regulator |
| 380 | via I2C bus. Maxim 8952 has one voltage output and supports 4 DVS |
| 381 | modes ranging from 0.77V to 1.40V by 0.01V steps. |
| 382 | |
Laxman Dewangan | 5928f53 | 2012-11-19 06:58:29 +0530 | [diff] [blame] | 383 | config REGULATOR_MAX8973 |
| 384 | tristate "Maxim MAX8973 voltage regulator " |
| 385 | depends on I2C |
| 386 | select REGMAP_I2C |
| 387 | help |
| 388 | The MAXIM MAX8973 high-efficiency. three phase, DC-DC step-down |
| 389 | switching regulator delievers up to 9A of output current. Each |
| 390 | phase operates at a 2MHz fixed frequency with a 120 deg shift |
| 391 | from the adjacent phase, allowing the use of small magnetic component. |
| 392 | |
MyungJoo Ham | bd6ca2c | 2011-03-11 11:34:44 +0900 | [diff] [blame] | 393 | config REGULATOR_MAX8997 |
| 394 | tristate "Maxim 8997/8966 regulator" |
| 395 | depends on MFD_MAX8997 |
| 396 | help |
| 397 | This driver controls a Maxim 8997/8966 regulator |
| 398 | via I2C bus. The provided regulator is suitable for S5PC110, |
| 399 | S5PV210, and Exynos-4 chips to control VCC_CORE and |
| 400 | VCC_USIM voltages. |
| 401 | |
Kyungmin Park | 156f252 | 2010-06-16 09:04:16 +0200 | [diff] [blame] | 402 | config REGULATOR_MAX8998 |
| 403 | tristate "Maxim 8998 voltage regulator" |
Marek Szyprowski | 69f7100 | 2010-06-21 10:04:23 +0200 | [diff] [blame] | 404 | depends on MFD_MAX8998 |
Kyungmin Park | 156f252 | 2010-06-16 09:04:16 +0200 | [diff] [blame] | 405 | help |
| 406 | This driver controls a Maxim 8998 voltage output regulator |
| 407 | via I2C bus. The provided regulator is suitable for S3C6410 |
| 408 | and S5PC1XX chips to control VCC_CORE and VCC_USIM voltages. |
| 409 | |
Jonghwa Lee | 133d401 | 2012-06-01 13:17:14 +0900 | [diff] [blame] | 410 | config REGULATOR_MAX77686 |
| 411 | tristate "Maxim 77686 regulator" |
| 412 | depends on MFD_MAX77686 |
| 413 | help |
| 414 | This driver controls a Maxim 77686 regulator |
| 415 | via I2C bus. The provided regulator is suitable for |
| 416 | Exynos-4 chips to control VARM and VINT voltages. |
| 417 | |
Jonghwa Lee | 80b022e | 2013-06-25 10:08:38 +0900 | [diff] [blame] | 418 | config REGULATOR_MAX77693 |
Krzysztof Kozlowski | 9e9a08e | 2015-07-15 21:59:54 +0900 | [diff] [blame] | 419 | tristate "Maxim 77693/77843 regulator" |
| 420 | depends on (MFD_MAX77693 || MFD_MAX77843) |
Jonghwa Lee | 80b022e | 2013-06-25 10:08:38 +0900 | [diff] [blame] | 421 | help |
Krzysztof Kozlowski | 9e9a08e | 2015-07-15 21:59:54 +0900 | [diff] [blame] | 422 | This driver controls a Maxim 77693/77843 regulators via I2C bus. |
Jonghwa Lee | 80b022e | 2013-06-25 10:08:38 +0900 | [diff] [blame] | 423 | The regulators include two LDOs, 'SAFEOUT1', 'SAFEOUT2' |
| 424 | and one current regulator 'CHARGER'. This is suitable for |
Krzysztof Kozlowski | 9e9a08e | 2015-07-15 21:59:54 +0900 | [diff] [blame] | 425 | Exynos-4x12 (MAX77693) or Exynos5433 (MAX77843) SoC chips. |
Jonghwa Lee | 80b022e | 2013-06-25 10:08:38 +0900 | [diff] [blame] | 426 | |
Javier Martinez Canillas | e6f2f80 | 2014-08-18 10:32:41 +0200 | [diff] [blame] | 427 | config REGULATOR_MAX77802 |
| 428 | tristate "Maxim 77802 regulator" |
| 429 | depends on MFD_MAX77686 |
| 430 | help |
| 431 | This driver controls a Maxim 77802 regulator |
| 432 | via I2C bus. The provided regulator is suitable for |
| 433 | Exynos5420/Exynos5800 SoCs to control various voltages. |
| 434 | It includes support for control of voltage and ramp speed. |
| 435 | |
Mark Brown | 82b736d | 2013-07-05 20:45:22 +0100 | [diff] [blame] | 436 | config REGULATOR_MC13XXX_CORE |
| 437 | tristate |
| 438 | |
| 439 | config REGULATOR_MC13783 |
| 440 | tristate "Freescale MC13783 regulator driver" |
Alexander Shiyan | e5a3da2 | 2013-12-14 17:03:10 +0400 | [diff] [blame] | 441 | depends on MFD_MC13XXX |
Mark Brown | 82b736d | 2013-07-05 20:45:22 +0100 | [diff] [blame] | 442 | select REGULATOR_MC13XXX_CORE |
| 443 | help |
| 444 | Say y here to support the regulators found on the Freescale MC13783 |
| 445 | PMIC. |
| 446 | |
| 447 | config REGULATOR_MC13892 |
| 448 | tristate "Freescale MC13892 regulator driver" |
| 449 | depends on MFD_MC13XXX |
| 450 | select REGULATOR_MC13XXX_CORE |
| 451 | help |
| 452 | Say y here to support the regulators found on the Freescale MC13892 |
| 453 | PMIC. |
| 454 | |
Henry Chen | 8766018 | 2015-07-24 13:24:41 +0800 | [diff] [blame] | 455 | config REGULATOR_MT6311 |
| 456 | tristate "MediaTek MT6311 PMIC" |
| 457 | depends on I2C |
Henry Chen | aab3c3f | 2015-11-17 16:36:49 +0800 | [diff] [blame] | 458 | select REGMAP_I2C |
Henry Chen | 8766018 | 2015-07-24 13:24:41 +0800 | [diff] [blame] | 459 | help |
| 460 | Say y here to select this option to enable the power regulator of |
| 461 | MediaTek MT6311 PMIC. |
| 462 | This driver supports the control of different power rails of device |
| 463 | through regulator interface. |
| 464 | |
Flora Fu | 0425e24 | 2014-12-05 12:07:54 +0800 | [diff] [blame] | 465 | config REGULATOR_MT6397 |
| 466 | tristate "MediaTek MT6397 PMIC" |
| 467 | depends on MFD_MT6397 |
| 468 | help |
| 469 | Say y here to select this option to enable the power regulator of |
| 470 | MediaTek MT6397 PMIC. |
| 471 | This driver supports the control of different power rails of device |
| 472 | through regulator interface. |
| 473 | |
Mark Brown | 82b736d | 2013-07-05 20:45:22 +0100 | [diff] [blame] | 474 | config REGULATOR_PALMAS |
| 475 | tristate "TI Palmas PMIC Regulators" |
| 476 | depends on MFD_PALMAS |
| 477 | help |
| 478 | If you wish to control the regulators on the Palmas series of |
| 479 | chips say Y here. This will enable support for all the software |
| 480 | controllable SMPS/LDO regulators. |
| 481 | |
| 482 | The regulators available on Palmas series chips vary depending |
| 483 | on the muxing. This is handled automatically in the driver by |
| 484 | reading the mux info from OTP. |
| 485 | |
Balaji T K | 11469e0 | 2014-02-19 20:26:40 +0530 | [diff] [blame] | 486 | config REGULATOR_PBIAS |
| 487 | tristate "PBIAS OMAP regulator driver" |
| 488 | depends on (ARCH_OMAP || COMPILE_TEST) && MFD_SYSCON |
| 489 | help |
| 490 | Say y here to support pbias regulator for mmc1:SD card i/o |
| 491 | on OMAP SoCs. |
| 492 | This driver provides support for OMAP pbias modelled |
| 493 | regulators. |
| 494 | |
Axel Lin | dfb9b8a | 2012-02-22 09:29:16 +0800 | [diff] [blame] | 495 | config REGULATOR_PCAP |
| 496 | tristate "Motorola PCAP2 regulator driver" |
| 497 | depends on EZX_PCAP |
Sangbeom Kim | 62aa492 | 2012-01-13 10:13:13 +0900 | [diff] [blame] | 498 | help |
Axel Lin | dfb9b8a | 2012-02-22 09:29:16 +0800 | [diff] [blame] | 499 | This driver provides support for the voltage regulators of the |
| 500 | PCAP2 PMIC. |
Balaji Rao | 5ec271e | 2009-01-09 01:51:01 +0100 | [diff] [blame] | 501 | |
Axel Lin | dfb9b8a | 2012-02-22 09:29:16 +0800 | [diff] [blame] | 502 | config REGULATOR_PCF50633 |
| 503 | tristate "NXP PCF50633 regulator driver" |
Michael Jones | c6d678b | 2012-07-26 16:07:23 +0200 | [diff] [blame] | 504 | depends on MFD_PCF50633 |
Daniel Ribeiro | 39b1772 | 2009-06-27 00:18:02 -0300 | [diff] [blame] | 505 | help |
Axel Lin | dfb9b8a | 2012-02-22 09:29:16 +0800 | [diff] [blame] | 506 | Say Y here to support the voltage regulators and convertors |
| 507 | on PCF50633 |
Daniel Ribeiro | 39b1772 | 2009-06-27 00:18:02 -0300 | [diff] [blame] | 508 | |
Robin Gong | 3784b6d | 2013-07-25 11:33:18 +0800 | [diff] [blame] | 509 | config REGULATOR_PFUZE100 |
Axel Lin | 2cee212 | 2014-03-05 18:02:43 +0800 | [diff] [blame] | 510 | tristate "Freescale PFUZE100/PFUZE200 regulator driver" |
Robin Gong | 3784b6d | 2013-07-25 11:33:18 +0800 | [diff] [blame] | 511 | depends on I2C |
Axel Lin | 94421b0 | 2013-07-29 12:08:01 +0800 | [diff] [blame] | 512 | select REGMAP_I2C |
Robin Gong | 3784b6d | 2013-07-25 11:33:18 +0800 | [diff] [blame] | 513 | help |
Axel Lin | 2cee212 | 2014-03-05 18:02:43 +0800 | [diff] [blame] | 514 | Say y here to support the regulators found on the Freescale |
| 515 | PFUZE100/PFUZE200 PMIC. |
Robin Gong | 3784b6d | 2013-07-25 11:33:18 +0800 | [diff] [blame] | 516 | |
James Ban | f307a7e | 2015-11-19 09:59:15 +0900 | [diff] [blame] | 517 | config REGULATOR_PV88060 |
| 518 | tristate "Powerventure Semiconductor PV88060 regulator" |
| 519 | depends on I2C |
| 520 | select REGMAP_I2C |
| 521 | help |
| 522 | Say y here to support the voltage regulators and convertors |
| 523 | PV88060 |
| 524 | |
James Ban | c90456e | 2015-12-08 10:57:29 +0900 | [diff] [blame] | 525 | config REGULATOR_PV88090 |
| 526 | tristate "Powerventure Semiconductor PV88090 regulator" |
| 527 | depends on I2C |
| 528 | select REGMAP_I2C |
| 529 | help |
| 530 | Say y here to support the voltage regulators and convertors |
| 531 | on PV88090 |
| 532 | |
Chris Zhong | aa66cc6 | 2014-09-28 10:28:53 +0800 | [diff] [blame] | 533 | config REGULATOR_PWM |
| 534 | tristate "PWM voltage regulator" |
| 535 | depends on PWM |
| 536 | help |
| 537 | This driver supports PWM controlled voltage regulators. PWM |
| 538 | duty cycle can increase or decrease the voltage. |
| 539 | |
Bjorn Andersson | 2720386 | 2014-09-22 16:25:29 -0700 | [diff] [blame] | 540 | config REGULATOR_QCOM_RPM |
| 541 | tristate "Qualcomm RPM regulator driver" |
| 542 | depends on MFD_QCOM_RPM |
| 543 | help |
| 544 | If you say yes to this option, support will be included for the |
| 545 | regulators exposed by the Resource Power Manager found in Qualcomm |
| 546 | 8660, 8960 and 8064 based devices. |
| 547 | |
| 548 | Say M here if you want to include support for the regulators on the |
| 549 | Qualcomm RPM as a module. The module will be named |
| 550 | "qcom_rpm-regulator". |
| 551 | |
Bjorn Andersson | da65e36 | 2015-08-17 11:43:59 -0700 | [diff] [blame] | 552 | config REGULATOR_QCOM_SMD_RPM |
| 553 | tristate "Qualcomm SMD based RPM regulator driver" |
| 554 | depends on QCOM_SMD_RPM |
| 555 | help |
| 556 | If you say yes to this option, support will be included for the |
| 557 | regulators exposed by the Resource Power Manager found in Qualcomm |
| 558 | 8974 based devices. |
| 559 | |
| 560 | Say M here if you want to include support for the regulators on the |
| 561 | Qualcomm RPM as a module. The module will be named |
| 562 | "qcom_smd-regulator". |
| 563 | |
Stephen Boyd | e92a404 | 2015-06-12 15:47:10 -0700 | [diff] [blame] | 564 | config REGULATOR_QCOM_SPMI |
| 565 | tristate "Qualcomm SPMI regulator driver" |
| 566 | depends on SPMI || COMPILE_TEST |
| 567 | help |
| 568 | If you say yes to this option, support will be included for the |
| 569 | regulators found in Qualcomm SPMI PMICs. |
| 570 | |
| 571 | Say M here if you want to include support for the regulators on the |
| 572 | Qualcomm SPMI PMICs as a module. The module will be named |
| 573 | "qcom_spmi-regulator". |
| 574 | |
Laxman Dewangan | 6ffc327 | 2012-04-04 12:44:00 +0530 | [diff] [blame] | 575 | config REGULATOR_RC5T583 |
| 576 | tristate "RICOH RC5T583 Power regulators" |
| 577 | depends on MFD_RC5T583 |
| 578 | help |
| 579 | Select this option to enable the power regulator of RICOH |
| 580 | PMIC RC5T583. |
| 581 | This driver supports the control of different power rails of device |
| 582 | through regulator interface. The device supports multiple DCDC/LDO |
| 583 | outputs which can be controlled by i2c communication. |
| 584 | |
Chris Zhong | 2cd64ae | 2014-08-20 11:36:42 +0800 | [diff] [blame] | 585 | config REGULATOR_RK808 |
| 586 | tristate "Rockchip RK808 Power regulators" |
| 587 | depends on MFD_RK808 |
| 588 | help |
| 589 | Select this option to enable the power regulator of ROCKCHIP |
| 590 | PMIC RK808. |
| 591 | This driver supports the control of different power rails of device |
| 592 | through regulator interface. The device supports multiple DCDC/LDO |
| 593 | outputs which can be controlled by i2c communication. |
| 594 | |
Beniamino Galvani | 811b700 | 2014-08-30 14:50:24 +0200 | [diff] [blame] | 595 | config REGULATOR_RN5T618 |
| 596 | tristate "Ricoh RN5T618 voltage regulators" |
| 597 | depends on MFD_RN5T618 |
| 598 | help |
| 599 | Say y here to support the regulators found on Ricoh RN5T618 PMIC. |
| 600 | |
Beomho Seo | b191757 | 2014-11-12 21:07:59 +0900 | [diff] [blame] | 601 | config REGULATOR_RT5033 |
| 602 | tristate "Richtek RT5033 Regulators" |
| 603 | depends on MFD_RT5033 |
| 604 | help |
| 605 | This adds support for voltage and current regulators in Richtek |
| 606 | RT5033 PMIC. The device supports multiple regulators like |
| 607 | current source, LDO and Buck. |
| 608 | |
Sachin Kamat | f187927 | 2014-03-14 17:21:58 +0530 | [diff] [blame] | 609 | config REGULATOR_S2MPA01 |
| 610 | tristate "Samsung S2MPA01 voltage regulator" |
Sangbeom Kim | cb74685 | 2012-07-11 21:08:17 +0900 | [diff] [blame] | 611 | depends on MFD_SEC_CORE |
| 612 | help |
Sachin Kamat | f187927 | 2014-03-14 17:21:58 +0530 | [diff] [blame] | 613 | This driver controls Samsung S2MPA01 voltage output regulator |
| 614 | via I2C bus. S2MPA01 has 10 Bucks and 26 LDO outputs. |
| 615 | |
Sangbeom Kim | cb74685 | 2012-07-11 21:08:17 +0900 | [diff] [blame] | 616 | config REGULATOR_S2MPS11 |
Thomas Abraham | 51af206 | 2015-11-20 16:07:52 +0530 | [diff] [blame] | 617 | tristate "Samsung S2MPS11/13/14/15/S2MPU02 voltage regulator" |
Sangbeom Kim | cb74685 | 2012-07-11 21:08:17 +0900 | [diff] [blame] | 618 | depends on MFD_SEC_CORE |
| 619 | help |
Thomas Abraham | 51af206 | 2015-11-20 16:07:52 +0530 | [diff] [blame] | 620 | This driver supports a Samsung S2MPS11/13/14/15/S2MPU02 voltage |
Chanwoo Choi | 76b9840 | 2014-11-18 17:59:40 +0900 | [diff] [blame] | 621 | output regulator via I2C bus. The chip is comprised of high efficient |
| 622 | Buck converters including Dual-Phase Buck converter, Buck-Boost |
| 623 | converter, various LDOs. |
Sangbeom Kim | cb74685 | 2012-07-11 21:08:17 +0900 | [diff] [blame] | 624 | |
Axel Lin | dfb9b8a | 2012-02-22 09:29:16 +0800 | [diff] [blame] | 625 | config REGULATOR_S5M8767 |
| 626 | tristate "Samsung S5M8767A voltage regulator" |
Sangbeom Kim | 66c9fbb | 2012-07-11 21:06:40 +0900 | [diff] [blame] | 627 | depends on MFD_SEC_CORE |
Sascha Hauer | 295c08b | 2009-08-19 01:43:50 +0200 | [diff] [blame] | 628 | help |
Axel Lin | dfb9b8a | 2012-02-22 09:29:16 +0800 | [diff] [blame] | 629 | This driver supports a Samsung S5M8767A voltage output regulator |
| 630 | via I2C bus. S5M8767A have 9 Bucks and 28 LDOs output and |
| 631 | supports DVS mode with 8bits of output voltage control. |
Yong Shen | 5e428d5 | 2010-12-14 14:00:55 +0800 | [diff] [blame] | 632 | |
Gyungoh Yoo | 9839d62 | 2014-08-08 18:10:22 +0900 | [diff] [blame] | 633 | config REGULATOR_SKY81452 |
| 634 | tristate "Skyworks Solutions SKY81452 voltage regulator" |
Gyungoh Yoo | 70b5b27 | 2014-11-17 17:33:10 +0900 | [diff] [blame] | 635 | depends on MFD_SKY81452 |
Lee Jones | 4a5d301 | 2014-03-21 10:21:36 +0000 | [diff] [blame] | 636 | help |
Gyungoh Yoo | 9839d62 | 2014-08-08 18:10:22 +0900 | [diff] [blame] | 637 | This driver supports Skyworks SKY81452 voltage output regulator |
| 638 | via I2C bus. SKY81452 has one voltage linear regulator can be |
| 639 | programmed from 4.5V to 20V. |
| 640 | |
| 641 | This driver can also be built as a module. If so, the module |
| 642 | will be called sky81452-regulator. |
Lee Jones | 4a5d301 | 2014-03-21 10:21:36 +0000 | [diff] [blame] | 643 | |
Mark Brown | 82b736d | 2013-07-05 20:45:22 +0100 | [diff] [blame] | 644 | config REGULATOR_TI_ABB |
Mark Brown | 631a1fc | 2013-07-29 16:49:46 +0100 | [diff] [blame] | 645 | tristate "TI Adaptive Body Bias on-chip LDO" |
Mark Brown | 82b736d | 2013-07-05 20:45:22 +0100 | [diff] [blame] | 646 | depends on ARCH_OMAP |
Linus Walleij | d619bc1 | 2009-09-09 11:31:00 +0200 | [diff] [blame] | 647 | help |
Mark Brown | 82b736d | 2013-07-05 20:45:22 +0100 | [diff] [blame] | 648 | Select this option to support Texas Instruments' on-chip Adaptive Body |
| 649 | Bias (ABB) LDO regulators. It is recommended that this option be |
| 650 | enabled on required TI SoC. Certain Operating Performance Points |
| 651 | on TI SoCs may be unstable without enabling this as it provides |
| 652 | device specific optimized bias to allow/optimize functionality. |
Graeme Gregory | 4c5dabc | 2012-05-15 15:48:59 +0900 | [diff] [blame] | 653 | |
Linus Walleij | 3615a34 | 2013-09-13 21:01:15 +0200 | [diff] [blame] | 654 | config REGULATOR_STW481X_VMMC |
| 655 | bool "ST Microelectronics STW481X VMMC regulator" |
Luis de Bethencourt | 4049dc1 | 2015-10-12 17:27:08 +0100 | [diff] [blame] | 656 | depends on MFD_STW481X || COMPILE_TEST |
Linus Walleij | 3615a34 | 2013-09-13 21:01:15 +0200 | [diff] [blame] | 657 | default y if MFD_STW481X |
| 658 | help |
| 659 | This driver supports the internal VMMC regulator in the STw481x |
| 660 | PMIC chips. |
| 661 | |
Laxman Dewangan | 0c57067 | 2012-10-06 20:47:46 +0530 | [diff] [blame] | 662 | config REGULATOR_TPS51632 |
| 663 | tristate "TI TPS51632 Power Regulator" |
| 664 | depends on I2C |
| 665 | select REGMAP_I2C |
| 666 | help |
| 667 | This driver supports TPS51632 voltage regulator chip. |
Axel Lin | 7bde767 | 2012-11-01 14:02:36 +0800 | [diff] [blame] | 668 | The TPS51632 is 3-2-1 Phase D-Cap+ Step Down Driverless Controller |
Laxman Dewangan | 0c57067 | 2012-10-06 20:47:46 +0530 | [diff] [blame] | 669 | with Serial VID control and DVFS. |
| 670 | The voltage output can be configure through I2C interface or PWM |
| 671 | interface. |
| 672 | |
Linus Walleij | 2edd3b6 | 2011-03-09 12:02:55 +0000 | [diff] [blame] | 673 | config REGULATOR_TPS6105X |
| 674 | tristate "TI TPS6105X Power regulators" |
| 675 | depends on TPS6105X |
| 676 | default y if TPS6105X |
| 677 | help |
| 678 | This driver supports TPS61050/TPS61052 voltage regulator chips. |
| 679 | It is a single boost converter primarily for white LEDs and |
| 680 | audio amplifiers. |
| 681 | |
Axel Lin | dfb9b8a | 2012-02-22 09:29:16 +0800 | [diff] [blame] | 682 | config REGULATOR_TPS62360 |
Axel Lin | d1cf4f6 | 2012-04-02 18:19:28 +0800 | [diff] [blame] | 683 | tristate "TI TPS6236x Power Regulator" |
Axel Lin | dfb9b8a | 2012-02-22 09:29:16 +0800 | [diff] [blame] | 684 | depends on I2C |
| 685 | select REGMAP_I2C |
| 686 | help |
Axel Lin | d1cf4f6 | 2012-04-02 18:19:28 +0800 | [diff] [blame] | 687 | This driver supports TPS6236x voltage regulator chip. This |
Axel Lin | dfb9b8a | 2012-02-22 09:29:16 +0800 | [diff] [blame] | 688 | regulator is meant for processor core supply. This chip is |
| 689 | high-frequency synchronous step down dc-dc converter optimized |
| 690 | for battery-powered portable applications. |
| 691 | |
Anuj Aggarwal | 2de7985 | 2009-08-21 00:39:44 +0530 | [diff] [blame] | 692 | config REGULATOR_TPS65023 |
| 693 | tristate "TI TPS65023 Power regulators" |
| 694 | depends on I2C |
Mark Brown | 9092335 | 2011-06-18 01:18:51 +0100 | [diff] [blame] | 695 | select REGMAP_I2C |
Anuj Aggarwal | 2de7985 | 2009-08-21 00:39:44 +0530 | [diff] [blame] | 696 | help |
| 697 | This driver supports TPS65023 voltage regulator chips. TPS65023 provides |
| 698 | three step-down converters and two general-purpose LDO voltage regulators. |
| 699 | It supports TI's software based Class-2 SmartReflex implementation. |
| 700 | |
| 701 | config REGULATOR_TPS6507X |
| 702 | tristate "TI TPS6507X Power regulators" |
| 703 | depends on I2C |
| 704 | help |
| 705 | This driver supports TPS6507X voltage regulator chips. TPS6507X provides |
| 706 | three step-down converters and two general-purpose LDO voltage regulators. |
| 707 | It supports TI's software based Class-2 SmartReflex implementation. |
| 708 | |
Andrew F. Davis | d2a2e72 | 2015-11-04 11:12:14 -0600 | [diff] [blame] | 709 | config REGULATOR_TPS65086 |
| 710 | tristate "TI TPS65086 Power regulators" |
| 711 | depends on MFD_TPS65086 |
| 712 | help |
| 713 | This driver provides support for the voltage regulators on |
| 714 | TI TPS65086 PMICs. |
| 715 | |
Venu Byravarasu | 452534e | 2012-03-22 18:34:09 +0530 | [diff] [blame] | 716 | config REGULATOR_TPS65090 |
| 717 | tristate "TI TPS65090 Power regulator" |
| 718 | depends on MFD_TPS65090 |
| 719 | help |
| 720 | This driver provides support for the voltage regulators on the |
| 721 | TI TPS65090 PMIC. |
| 722 | |
AnilKumar Ch | a493077 | 2012-01-11 16:11:49 +0530 | [diff] [blame] | 723 | config REGULATOR_TPS65217 |
| 724 | tristate "TI TPS65217 Power regulators" |
| 725 | depends on MFD_TPS65217 |
| 726 | help |
| 727 | This driver supports TPS65217 voltage regulator chips. TPS65217 |
| 728 | provides three step-down converters and four general-purpose LDO |
| 729 | voltage regulators. It supports software based voltage control |
| 730 | for different voltage domains |
| 731 | |
Keerthy | 90e7d52 | 2014-02-06 11:20:13 +0530 | [diff] [blame] | 732 | config REGULATOR_TPS65218 |
| 733 | tristate "TI TPS65218 Power regulators" |
Axel Lin | 948838a | 2014-02-19 16:35:03 +0800 | [diff] [blame] | 734 | depends on MFD_TPS65218 && OF |
Keerthy | 90e7d52 | 2014-02-06 11:20:13 +0530 | [diff] [blame] | 735 | help |
| 736 | This driver supports TPS65218 voltage regulator chips. TPS65218 |
| 737 | provides six step-down converters and one general-purpose LDO |
| 738 | voltage regulators. It supports software based voltage control |
| 739 | for different voltage domains |
| 740 | |
Cyril Chemparathy | 1394fd2 | 2010-12-07 12:04:11 -0500 | [diff] [blame] | 741 | config REGULATOR_TPS6524X |
| 742 | tristate "TI TPS6524X Power regulators" |
| 743 | depends on SPI |
| 744 | help |
| 745 | This driver supports TPS6524X voltage regulator chips. TPS6524X |
| 746 | provides three step-down converters and two general-purpose LDO |
| 747 | voltage regulators. This device is interfaced using a customized |
| 748 | serial interface currently supported on the sequencer serial |
| 749 | port controller. |
| 750 | |
Axel Lin | dfb9b8a | 2012-02-22 09:29:16 +0800 | [diff] [blame] | 751 | config REGULATOR_TPS6586X |
| 752 | tristate "TI TPS6586X Power regulators" |
| 753 | depends on MFD_TPS6586X |
| 754 | help |
| 755 | This driver supports TPS6586X voltage regulator chips. |
| 756 | |
Graeme Gregory | 518fb72 | 2011-05-02 16:20:08 -0500 | [diff] [blame] | 757 | config REGULATOR_TPS65910 |
Axel Lin | ae0e654 | 2012-02-21 10:14:55 +0800 | [diff] [blame] | 758 | tristate "TI TPS65910/TPS65911 Power Regulators" |
Graeme Gregory | 518fb72 | 2011-05-02 16:20:08 -0500 | [diff] [blame] | 759 | depends on MFD_TPS65910 |
| 760 | help |
Axel Lin | ae0e654 | 2012-02-21 10:14:55 +0800 | [diff] [blame] | 761 | This driver supports TPS65910/TPS65911 voltage regulator chips. |
Graeme Gregory | 518fb72 | 2011-05-02 16:20:08 -0500 | [diff] [blame] | 762 | |
Axel Lin | dfb9b8a | 2012-02-22 09:29:16 +0800 | [diff] [blame] | 763 | config REGULATOR_TPS65912 |
| 764 | tristate "TI TPS65912 Power regulator" |
| 765 | depends on (MFD_TPS65912_I2C || MFD_TPS65912_SPI) |
Laxman Dewangan | 6219929f | 2012-01-09 20:27:41 +0530 | [diff] [blame] | 766 | help |
Axel Lin | dfb9b8a | 2012-02-22 09:29:16 +0800 | [diff] [blame] | 767 | This driver supports TPS65912 voltage regulator chip. |
Laxman Dewangan | 6219929f | 2012-01-09 20:27:41 +0530 | [diff] [blame] | 768 | |
Laxman Dewangan | 1a0bb67 | 2012-11-11 20:42:01 +0530 | [diff] [blame] | 769 | config REGULATOR_TPS80031 |
| 770 | tristate "TI TPS80031/TPS80032 power regualtor driver" |
| 771 | depends on MFD_TPS80031 |
| 772 | help |
| 773 | TPS80031/ TPS80032 Fully Integrated Power Management with Power |
| 774 | Path and Battery Charger. It has 5 configurable step-down |
| 775 | converters, 11 general purpose LDOs, VBUS generator and digital |
| 776 | output to control regulators. |
| 777 | |
Mark Brown | da09155 | 2008-10-10 15:58:15 +0100 | [diff] [blame] | 778 | config REGULATOR_TWL4030 |
Mark Brown | 631a1fc | 2013-07-29 16:49:46 +0100 | [diff] [blame] | 779 | tristate "TI TWL4030/TWL5030/TWL6030/TPS659x0 PMIC" |
Mark Brown | da09155 | 2008-10-10 15:58:15 +0100 | [diff] [blame] | 780 | depends on TWL4030_CORE |
Mark Brown | da09155 | 2008-10-10 15:58:15 +0100 | [diff] [blame] | 781 | help |
| 782 | This driver supports the voltage regulators provided by |
| 783 | this family of companion chips. |
| 784 | |
Pawel Moll | 31e5408 | 2012-09-24 18:56:54 +0100 | [diff] [blame] | 785 | config REGULATOR_VEXPRESS |
| 786 | tristate "Versatile Express regulators" |
| 787 | depends on VEXPRESS_CONFIG |
| 788 | help |
| 789 | This driver provides support for voltage regulators available |
| 790 | on the ARM Ltd's Versatile Express platform. |
| 791 | |
Liam Girdwood | ba7e476 | 2008-04-30 17:13:42 +0100 | [diff] [blame] | 792 | config REGULATOR_WM831X |
Axel Lin | dfb9b8a | 2012-02-22 09:29:16 +0800 | [diff] [blame] | 793 | tristate "Wolfson Microelectronics WM831x PMIC regulators" |
Liam Girdwood | ba7e476 | 2008-04-30 17:13:42 +0100 | [diff] [blame] | 794 | depends on MFD_WM831X |
| 795 | help |
| 796 | Support the voltage and current regulators of the WM831x series |
| 797 | of PMIC devices. |
| 798 | |
Mark Brown | 42fad57 | 2008-09-11 11:12:01 +0100 | [diff] [blame] | 799 | config REGULATOR_WM8350 |
| 800 | tristate "Wolfson Microelectronics WM8350 AudioPlus PMIC" |
| 801 | depends on MFD_WM8350 |
Mark Brown | 42fad57 | 2008-09-11 11:12:01 +0100 | [diff] [blame] | 802 | help |
| 803 | This driver provides support for the voltage and current regulators |
Michael Jones | c6d678b | 2012-07-26 16:07:23 +0200 | [diff] [blame] | 804 | of the WM8350 AudioPlus PMIC. |
Mark Brown | 42fad57 | 2008-09-11 11:12:01 +0100 | [diff] [blame] | 805 | |
| 806 | config REGULATOR_WM8400 |
| 807 | tristate "Wolfson Microelectronics WM8400 AudioPlus PMIC" |
| 808 | depends on MFD_WM8400 |
| 809 | help |
| 810 | This driver provides support for the voltage regulators of the |
| 811 | WM8400 AudioPlus PMIC. |
Mark Brown | da09155 | 2008-10-10 15:58:15 +0100 | [diff] [blame] | 812 | |
Eric Miao | 129eef9 | 2008-08-27 04:16:08 +0800 | [diff] [blame] | 813 | config REGULATOR_WM8994 |
| 814 | tristate "Wolfson Microelectronics WM8994 CODEC" |
| 815 | depends on MFD_WM8994 |
Eric Miao | 129eef9 | 2008-08-27 04:16:08 +0800 | [diff] [blame] | 816 | help |
| 817 | This driver provides support for the voltage regulators on the |
| 818 | WM8994 CODEC. |
| 819 | |
Takashi Iwai | bbda14d | 2008-10-30 15:57:05 +0100 | [diff] [blame] | 820 | endif |
Sascha Hauer | 295c08b | 2009-08-19 01:43:50 +0200 | [diff] [blame] | 821 | |