Georgi Djakov | 872f91b5 | 2016-11-02 17:56:57 +0200 | [diff] [blame] | 1 | /* |
| 2 | * Copyright (c) 2016, Linaro Limited |
| 3 | * Copyright (c) 2014, The Linux Foundation. All rights reserved. |
| 4 | * |
| 5 | * This software is licensed under the terms of the GNU General Public |
| 6 | * License version 2, as published by the Free Software Foundation, and |
| 7 | * may be copied, distributed, and modified under those terms. |
| 8 | * |
| 9 | * This program is distributed in the hope that it will be useful, |
| 10 | * but WITHOUT ANY WARRANTY; without even the implied warranty of |
| 11 | * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the |
| 12 | * GNU General Public License for more details. |
| 13 | */ |
| 14 | |
| 15 | #include <linux/clk-provider.h> |
| 16 | #include <linux/err.h> |
| 17 | #include <linux/export.h> |
| 18 | #include <linux/init.h> |
| 19 | #include <linux/kernel.h> |
| 20 | #include <linux/module.h> |
| 21 | #include <linux/mutex.h> |
| 22 | #include <linux/mfd/qcom_rpm.h> |
| 23 | #include <linux/of.h> |
| 24 | #include <linux/of_device.h> |
| 25 | #include <linux/platform_device.h> |
| 26 | |
| 27 | #include <dt-bindings/mfd/qcom-rpm.h> |
| 28 | #include <dt-bindings/clock/qcom,rpmcc.h> |
| 29 | |
| 30 | #define QCOM_RPM_MISC_CLK_TYPE 0x306b6c63 |
| 31 | #define QCOM_RPM_SCALING_ENABLE_ID 0x2 |
| 32 | |
| 33 | #define DEFINE_CLK_RPM(_platform, _name, _active, r_id) \ |
| 34 | static struct clk_rpm _platform##_##_active; \ |
| 35 | static struct clk_rpm _platform##_##_name = { \ |
| 36 | .rpm_clk_id = (r_id), \ |
| 37 | .peer = &_platform##_##_active, \ |
| 38 | .rate = INT_MAX, \ |
| 39 | .hw.init = &(struct clk_init_data){ \ |
| 40 | .ops = &clk_rpm_ops, \ |
| 41 | .name = #_name, \ |
| 42 | .parent_names = (const char *[]){ "pxo_board" }, \ |
| 43 | .num_parents = 1, \ |
| 44 | }, \ |
| 45 | }; \ |
| 46 | static struct clk_rpm _platform##_##_active = { \ |
| 47 | .rpm_clk_id = (r_id), \ |
| 48 | .peer = &_platform##_##_name, \ |
| 49 | .active_only = true, \ |
| 50 | .rate = INT_MAX, \ |
| 51 | .hw.init = &(struct clk_init_data){ \ |
| 52 | .ops = &clk_rpm_ops, \ |
| 53 | .name = #_active, \ |
| 54 | .parent_names = (const char *[]){ "pxo_board" }, \ |
| 55 | .num_parents = 1, \ |
| 56 | }, \ |
| 57 | } |
| 58 | |
| 59 | #define DEFINE_CLK_RPM_PXO_BRANCH(_platform, _name, _active, r_id, r) \ |
| 60 | static struct clk_rpm _platform##_##_active; \ |
| 61 | static struct clk_rpm _platform##_##_name = { \ |
| 62 | .rpm_clk_id = (r_id), \ |
| 63 | .active_only = true, \ |
| 64 | .peer = &_platform##_##_active, \ |
| 65 | .rate = (r), \ |
| 66 | .branch = true, \ |
| 67 | .hw.init = &(struct clk_init_data){ \ |
| 68 | .ops = &clk_rpm_branch_ops, \ |
| 69 | .name = #_name, \ |
| 70 | .parent_names = (const char *[]){ "pxo_board" }, \ |
| 71 | .num_parents = 1, \ |
| 72 | }, \ |
| 73 | }; \ |
| 74 | static struct clk_rpm _platform##_##_active = { \ |
| 75 | .rpm_clk_id = (r_id), \ |
| 76 | .peer = &_platform##_##_name, \ |
| 77 | .rate = (r), \ |
| 78 | .branch = true, \ |
| 79 | .hw.init = &(struct clk_init_data){ \ |
| 80 | .ops = &clk_rpm_branch_ops, \ |
| 81 | .name = #_active, \ |
| 82 | .parent_names = (const char *[]){ "pxo_board" }, \ |
| 83 | .num_parents = 1, \ |
| 84 | }, \ |
| 85 | } |
| 86 | |
| 87 | #define DEFINE_CLK_RPM_CXO_BRANCH(_platform, _name, _active, r_id, r) \ |
| 88 | static struct clk_rpm _platform##_##_active; \ |
| 89 | static struct clk_rpm _platform##_##_name = { \ |
| 90 | .rpm_clk_id = (r_id), \ |
| 91 | .peer = &_platform##_##_active, \ |
| 92 | .rate = (r), \ |
| 93 | .branch = true, \ |
| 94 | .hw.init = &(struct clk_init_data){ \ |
| 95 | .ops = &clk_rpm_branch_ops, \ |
| 96 | .name = #_name, \ |
| 97 | .parent_names = (const char *[]){ "cxo_board" }, \ |
| 98 | .num_parents = 1, \ |
| 99 | }, \ |
| 100 | }; \ |
| 101 | static struct clk_rpm _platform##_##_active = { \ |
| 102 | .rpm_clk_id = (r_id), \ |
| 103 | .active_only = true, \ |
| 104 | .peer = &_platform##_##_name, \ |
| 105 | .rate = (r), \ |
| 106 | .branch = true, \ |
| 107 | .hw.init = &(struct clk_init_data){ \ |
| 108 | .ops = &clk_rpm_branch_ops, \ |
| 109 | .name = #_active, \ |
| 110 | .parent_names = (const char *[]){ "cxo_board" }, \ |
| 111 | .num_parents = 1, \ |
| 112 | }, \ |
| 113 | } |
| 114 | |
| 115 | #define to_clk_rpm(_hw) container_of(_hw, struct clk_rpm, hw) |
| 116 | |
| 117 | struct clk_rpm { |
| 118 | const int rpm_clk_id; |
| 119 | const bool active_only; |
| 120 | unsigned long rate; |
| 121 | bool enabled; |
| 122 | bool branch; |
| 123 | struct clk_rpm *peer; |
| 124 | struct clk_hw hw; |
| 125 | struct qcom_rpm *rpm; |
| 126 | }; |
| 127 | |
| 128 | struct rpm_cc { |
| 129 | struct qcom_rpm *rpm; |
Georgi Djakov | c260524 | 2016-11-23 16:52:49 +0200 | [diff] [blame] | 130 | struct clk_rpm **clks; |
| 131 | size_t num_clks; |
Georgi Djakov | 872f91b5 | 2016-11-02 17:56:57 +0200 | [diff] [blame] | 132 | }; |
| 133 | |
| 134 | struct rpm_clk_desc { |
| 135 | struct clk_rpm **clks; |
| 136 | size_t num_clks; |
| 137 | }; |
| 138 | |
| 139 | static DEFINE_MUTEX(rpm_clk_lock); |
| 140 | |
| 141 | static int clk_rpm_handoff(struct clk_rpm *r) |
| 142 | { |
| 143 | int ret; |
| 144 | u32 value = INT_MAX; |
| 145 | |
| 146 | ret = qcom_rpm_write(r->rpm, QCOM_RPM_ACTIVE_STATE, |
| 147 | r->rpm_clk_id, &value, 1); |
| 148 | if (ret) |
| 149 | return ret; |
| 150 | ret = qcom_rpm_write(r->rpm, QCOM_RPM_SLEEP_STATE, |
| 151 | r->rpm_clk_id, &value, 1); |
| 152 | if (ret) |
| 153 | return ret; |
| 154 | |
| 155 | return 0; |
| 156 | } |
| 157 | |
| 158 | static int clk_rpm_set_rate_active(struct clk_rpm *r, unsigned long rate) |
| 159 | { |
| 160 | u32 value = DIV_ROUND_UP(rate, 1000); /* to kHz */ |
| 161 | |
| 162 | return qcom_rpm_write(r->rpm, QCOM_RPM_ACTIVE_STATE, |
| 163 | r->rpm_clk_id, &value, 1); |
| 164 | } |
| 165 | |
| 166 | static int clk_rpm_set_rate_sleep(struct clk_rpm *r, unsigned long rate) |
| 167 | { |
| 168 | u32 value = DIV_ROUND_UP(rate, 1000); /* to kHz */ |
| 169 | |
| 170 | return qcom_rpm_write(r->rpm, QCOM_RPM_SLEEP_STATE, |
| 171 | r->rpm_clk_id, &value, 1); |
| 172 | } |
| 173 | |
| 174 | static void to_active_sleep(struct clk_rpm *r, unsigned long rate, |
| 175 | unsigned long *active, unsigned long *sleep) |
| 176 | { |
| 177 | *active = rate; |
| 178 | |
| 179 | /* |
| 180 | * Active-only clocks don't care what the rate is during sleep. So, |
| 181 | * they vote for zero. |
| 182 | */ |
| 183 | if (r->active_only) |
| 184 | *sleep = 0; |
| 185 | else |
| 186 | *sleep = *active; |
| 187 | } |
| 188 | |
| 189 | static int clk_rpm_prepare(struct clk_hw *hw) |
| 190 | { |
| 191 | struct clk_rpm *r = to_clk_rpm(hw); |
| 192 | struct clk_rpm *peer = r->peer; |
| 193 | unsigned long this_rate = 0, this_sleep_rate = 0; |
| 194 | unsigned long peer_rate = 0, peer_sleep_rate = 0; |
| 195 | unsigned long active_rate, sleep_rate; |
| 196 | int ret = 0; |
| 197 | |
| 198 | mutex_lock(&rpm_clk_lock); |
| 199 | |
| 200 | /* Don't send requests to the RPM if the rate has not been set. */ |
| 201 | if (!r->rate) |
| 202 | goto out; |
| 203 | |
| 204 | to_active_sleep(r, r->rate, &this_rate, &this_sleep_rate); |
| 205 | |
| 206 | /* Take peer clock's rate into account only if it's enabled. */ |
| 207 | if (peer->enabled) |
| 208 | to_active_sleep(peer, peer->rate, |
| 209 | &peer_rate, &peer_sleep_rate); |
| 210 | |
| 211 | active_rate = max(this_rate, peer_rate); |
| 212 | |
| 213 | if (r->branch) |
| 214 | active_rate = !!active_rate; |
| 215 | |
| 216 | ret = clk_rpm_set_rate_active(r, active_rate); |
| 217 | if (ret) |
| 218 | goto out; |
| 219 | |
| 220 | sleep_rate = max(this_sleep_rate, peer_sleep_rate); |
| 221 | if (r->branch) |
| 222 | sleep_rate = !!sleep_rate; |
| 223 | |
| 224 | ret = clk_rpm_set_rate_sleep(r, sleep_rate); |
| 225 | if (ret) |
| 226 | /* Undo the active set vote and restore it */ |
| 227 | ret = clk_rpm_set_rate_active(r, peer_rate); |
| 228 | |
| 229 | out: |
| 230 | if (!ret) |
| 231 | r->enabled = true; |
| 232 | |
| 233 | mutex_unlock(&rpm_clk_lock); |
| 234 | |
| 235 | return ret; |
| 236 | } |
| 237 | |
| 238 | static void clk_rpm_unprepare(struct clk_hw *hw) |
| 239 | { |
| 240 | struct clk_rpm *r = to_clk_rpm(hw); |
| 241 | struct clk_rpm *peer = r->peer; |
| 242 | unsigned long peer_rate = 0, peer_sleep_rate = 0; |
| 243 | unsigned long active_rate, sleep_rate; |
| 244 | int ret; |
| 245 | |
| 246 | mutex_lock(&rpm_clk_lock); |
| 247 | |
| 248 | if (!r->rate) |
| 249 | goto out; |
| 250 | |
| 251 | /* Take peer clock's rate into account only if it's enabled. */ |
| 252 | if (peer->enabled) |
| 253 | to_active_sleep(peer, peer->rate, &peer_rate, |
| 254 | &peer_sleep_rate); |
| 255 | |
| 256 | active_rate = r->branch ? !!peer_rate : peer_rate; |
| 257 | ret = clk_rpm_set_rate_active(r, active_rate); |
| 258 | if (ret) |
| 259 | goto out; |
| 260 | |
| 261 | sleep_rate = r->branch ? !!peer_sleep_rate : peer_sleep_rate; |
| 262 | ret = clk_rpm_set_rate_sleep(r, sleep_rate); |
| 263 | if (ret) |
| 264 | goto out; |
| 265 | |
| 266 | r->enabled = false; |
| 267 | |
| 268 | out: |
| 269 | mutex_unlock(&rpm_clk_lock); |
| 270 | } |
| 271 | |
| 272 | static int clk_rpm_set_rate(struct clk_hw *hw, |
| 273 | unsigned long rate, unsigned long parent_rate) |
| 274 | { |
| 275 | struct clk_rpm *r = to_clk_rpm(hw); |
| 276 | struct clk_rpm *peer = r->peer; |
| 277 | unsigned long active_rate, sleep_rate; |
| 278 | unsigned long this_rate = 0, this_sleep_rate = 0; |
| 279 | unsigned long peer_rate = 0, peer_sleep_rate = 0; |
| 280 | int ret = 0; |
| 281 | |
| 282 | mutex_lock(&rpm_clk_lock); |
| 283 | |
| 284 | if (!r->enabled) |
| 285 | goto out; |
| 286 | |
| 287 | to_active_sleep(r, rate, &this_rate, &this_sleep_rate); |
| 288 | |
| 289 | /* Take peer clock's rate into account only if it's enabled. */ |
| 290 | if (peer->enabled) |
| 291 | to_active_sleep(peer, peer->rate, |
| 292 | &peer_rate, &peer_sleep_rate); |
| 293 | |
| 294 | active_rate = max(this_rate, peer_rate); |
| 295 | ret = clk_rpm_set_rate_active(r, active_rate); |
| 296 | if (ret) |
| 297 | goto out; |
| 298 | |
| 299 | sleep_rate = max(this_sleep_rate, peer_sleep_rate); |
| 300 | ret = clk_rpm_set_rate_sleep(r, sleep_rate); |
| 301 | if (ret) |
| 302 | goto out; |
| 303 | |
| 304 | r->rate = rate; |
| 305 | |
| 306 | out: |
| 307 | mutex_unlock(&rpm_clk_lock); |
| 308 | |
| 309 | return ret; |
| 310 | } |
| 311 | |
| 312 | static long clk_rpm_round_rate(struct clk_hw *hw, unsigned long rate, |
| 313 | unsigned long *parent_rate) |
| 314 | { |
| 315 | /* |
| 316 | * RPM handles rate rounding and we don't have a way to |
| 317 | * know what the rate will be, so just return whatever |
| 318 | * rate is requested. |
| 319 | */ |
| 320 | return rate; |
| 321 | } |
| 322 | |
| 323 | static unsigned long clk_rpm_recalc_rate(struct clk_hw *hw, |
| 324 | unsigned long parent_rate) |
| 325 | { |
| 326 | struct clk_rpm *r = to_clk_rpm(hw); |
| 327 | |
| 328 | /* |
| 329 | * RPM handles rate rounding and we don't have a way to |
| 330 | * know what the rate will be, so just return whatever |
| 331 | * rate was set. |
| 332 | */ |
| 333 | return r->rate; |
| 334 | } |
| 335 | |
| 336 | static const struct clk_ops clk_rpm_ops = { |
| 337 | .prepare = clk_rpm_prepare, |
| 338 | .unprepare = clk_rpm_unprepare, |
| 339 | .set_rate = clk_rpm_set_rate, |
| 340 | .round_rate = clk_rpm_round_rate, |
| 341 | .recalc_rate = clk_rpm_recalc_rate, |
| 342 | }; |
| 343 | |
| 344 | static const struct clk_ops clk_rpm_branch_ops = { |
| 345 | .prepare = clk_rpm_prepare, |
| 346 | .unprepare = clk_rpm_unprepare, |
| 347 | .round_rate = clk_rpm_round_rate, |
| 348 | .recalc_rate = clk_rpm_recalc_rate, |
| 349 | }; |
| 350 | |
| 351 | /* apq8064 */ |
| 352 | DEFINE_CLK_RPM(apq8064, afab_clk, afab_a_clk, QCOM_RPM_APPS_FABRIC_CLK); |
| 353 | DEFINE_CLK_RPM(apq8064, cfpb_clk, cfpb_a_clk, QCOM_RPM_CFPB_CLK); |
| 354 | DEFINE_CLK_RPM(apq8064, daytona_clk, daytona_a_clk, QCOM_RPM_DAYTONA_FABRIC_CLK); |
| 355 | DEFINE_CLK_RPM(apq8064, ebi1_clk, ebi1_a_clk, QCOM_RPM_EBI1_CLK); |
| 356 | DEFINE_CLK_RPM(apq8064, mmfab_clk, mmfab_a_clk, QCOM_RPM_MM_FABRIC_CLK); |
| 357 | DEFINE_CLK_RPM(apq8064, mmfpb_clk, mmfpb_a_clk, QCOM_RPM_MMFPB_CLK); |
| 358 | DEFINE_CLK_RPM(apq8064, sfab_clk, sfab_a_clk, QCOM_RPM_SYS_FABRIC_CLK); |
| 359 | DEFINE_CLK_RPM(apq8064, sfpb_clk, sfpb_a_clk, QCOM_RPM_SFPB_CLK); |
| 360 | DEFINE_CLK_RPM(apq8064, qdss_clk, qdss_a_clk, QCOM_RPM_QDSS_CLK); |
| 361 | |
| 362 | static struct clk_rpm *apq8064_clks[] = { |
| 363 | [RPM_APPS_FABRIC_CLK] = &apq8064_afab_clk, |
| 364 | [RPM_APPS_FABRIC_A_CLK] = &apq8064_afab_a_clk, |
| 365 | [RPM_CFPB_CLK] = &apq8064_cfpb_clk, |
| 366 | [RPM_CFPB_A_CLK] = &apq8064_cfpb_a_clk, |
| 367 | [RPM_DAYTONA_FABRIC_CLK] = &apq8064_daytona_clk, |
| 368 | [RPM_DAYTONA_FABRIC_A_CLK] = &apq8064_daytona_a_clk, |
| 369 | [RPM_EBI1_CLK] = &apq8064_ebi1_clk, |
| 370 | [RPM_EBI1_A_CLK] = &apq8064_ebi1_a_clk, |
| 371 | [RPM_MM_FABRIC_CLK] = &apq8064_mmfab_clk, |
| 372 | [RPM_MM_FABRIC_A_CLK] = &apq8064_mmfab_a_clk, |
| 373 | [RPM_MMFPB_CLK] = &apq8064_mmfpb_clk, |
| 374 | [RPM_MMFPB_A_CLK] = &apq8064_mmfpb_a_clk, |
| 375 | [RPM_SYS_FABRIC_CLK] = &apq8064_sfab_clk, |
| 376 | [RPM_SYS_FABRIC_A_CLK] = &apq8064_sfab_a_clk, |
| 377 | [RPM_SFPB_CLK] = &apq8064_sfpb_clk, |
| 378 | [RPM_SFPB_A_CLK] = &apq8064_sfpb_a_clk, |
| 379 | [RPM_QDSS_CLK] = &apq8064_qdss_clk, |
| 380 | [RPM_QDSS_A_CLK] = &apq8064_qdss_a_clk, |
| 381 | }; |
| 382 | |
| 383 | static const struct rpm_clk_desc rpm_clk_apq8064 = { |
| 384 | .clks = apq8064_clks, |
| 385 | .num_clks = ARRAY_SIZE(apq8064_clks), |
| 386 | }; |
| 387 | |
| 388 | static const struct of_device_id rpm_clk_match_table[] = { |
| 389 | { .compatible = "qcom,rpmcc-apq8064", .data = &rpm_clk_apq8064 }, |
| 390 | { } |
| 391 | }; |
| 392 | MODULE_DEVICE_TABLE(of, rpm_clk_match_table); |
| 393 | |
Georgi Djakov | c260524 | 2016-11-23 16:52:49 +0200 | [diff] [blame] | 394 | static struct clk_hw *qcom_rpm_clk_hw_get(struct of_phandle_args *clkspec, |
| 395 | void *data) |
| 396 | { |
| 397 | struct rpm_cc *rcc = data; |
| 398 | unsigned int idx = clkspec->args[0]; |
| 399 | |
| 400 | if (idx >= rcc->num_clks) { |
| 401 | pr_err("%s: invalid index %u\n", __func__, idx); |
| 402 | return ERR_PTR(-EINVAL); |
| 403 | } |
| 404 | |
| 405 | return rcc->clks[idx] ? &rcc->clks[idx]->hw : ERR_PTR(-ENOENT); |
| 406 | } |
| 407 | |
Georgi Djakov | 872f91b5 | 2016-11-02 17:56:57 +0200 | [diff] [blame] | 408 | static int rpm_clk_probe(struct platform_device *pdev) |
| 409 | { |
Georgi Djakov | 872f91b5 | 2016-11-02 17:56:57 +0200 | [diff] [blame] | 410 | struct rpm_cc *rcc; |
Georgi Djakov | 872f91b5 | 2016-11-02 17:56:57 +0200 | [diff] [blame] | 411 | int ret; |
| 412 | size_t num_clks, i; |
| 413 | struct qcom_rpm *rpm; |
| 414 | struct clk_rpm **rpm_clks; |
| 415 | const struct rpm_clk_desc *desc; |
| 416 | |
| 417 | rpm = dev_get_drvdata(pdev->dev.parent); |
| 418 | if (!rpm) { |
| 419 | dev_err(&pdev->dev, "Unable to retrieve handle to RPM\n"); |
| 420 | return -ENODEV; |
| 421 | } |
| 422 | |
| 423 | desc = of_device_get_match_data(&pdev->dev); |
| 424 | if (!desc) |
| 425 | return -EINVAL; |
| 426 | |
| 427 | rpm_clks = desc->clks; |
| 428 | num_clks = desc->num_clks; |
| 429 | |
Georgi Djakov | c260524 | 2016-11-23 16:52:49 +0200 | [diff] [blame] | 430 | rcc = devm_kzalloc(&pdev->dev, sizeof(*rcc), GFP_KERNEL); |
Georgi Djakov | 872f91b5 | 2016-11-02 17:56:57 +0200 | [diff] [blame] | 431 | if (!rcc) |
| 432 | return -ENOMEM; |
| 433 | |
Georgi Djakov | c260524 | 2016-11-23 16:52:49 +0200 | [diff] [blame] | 434 | rcc->clks = rpm_clks; |
| 435 | rcc->num_clks = num_clks; |
Georgi Djakov | 872f91b5 | 2016-11-02 17:56:57 +0200 | [diff] [blame] | 436 | |
| 437 | for (i = 0; i < num_clks; i++) { |
| 438 | if (!rpm_clks[i]) |
| 439 | continue; |
| 440 | |
| 441 | rpm_clks[i]->rpm = rpm; |
| 442 | |
| 443 | ret = clk_rpm_handoff(rpm_clks[i]); |
| 444 | if (ret) |
| 445 | goto err; |
| 446 | } |
| 447 | |
| 448 | for (i = 0; i < num_clks; i++) { |
Georgi Djakov | c260524 | 2016-11-23 16:52:49 +0200 | [diff] [blame] | 449 | if (!rpm_clks[i]) |
Georgi Djakov | 872f91b5 | 2016-11-02 17:56:57 +0200 | [diff] [blame] | 450 | continue; |
Georgi Djakov | 872f91b5 | 2016-11-02 17:56:57 +0200 | [diff] [blame] | 451 | |
| 452 | ret = devm_clk_hw_register(&pdev->dev, &rpm_clks[i]->hw); |
| 453 | if (ret) |
| 454 | goto err; |
| 455 | } |
| 456 | |
Georgi Djakov | c260524 | 2016-11-23 16:52:49 +0200 | [diff] [blame] | 457 | ret = of_clk_add_hw_provider(pdev->dev.of_node, qcom_rpm_clk_hw_get, |
| 458 | rcc); |
Georgi Djakov | 872f91b5 | 2016-11-02 17:56:57 +0200 | [diff] [blame] | 459 | if (ret) |
| 460 | goto err; |
| 461 | |
| 462 | return 0; |
| 463 | err: |
| 464 | dev_err(&pdev->dev, "Error registering RPM Clock driver (%d)\n", ret); |
| 465 | return ret; |
| 466 | } |
| 467 | |
| 468 | static int rpm_clk_remove(struct platform_device *pdev) |
| 469 | { |
| 470 | of_clk_del_provider(pdev->dev.of_node); |
| 471 | return 0; |
| 472 | } |
| 473 | |
| 474 | static struct platform_driver rpm_clk_driver = { |
| 475 | .driver = { |
| 476 | .name = "qcom-clk-rpm", |
| 477 | .of_match_table = rpm_clk_match_table, |
| 478 | }, |
| 479 | .probe = rpm_clk_probe, |
| 480 | .remove = rpm_clk_remove, |
| 481 | }; |
| 482 | |
| 483 | static int __init rpm_clk_init(void) |
| 484 | { |
| 485 | return platform_driver_register(&rpm_clk_driver); |
| 486 | } |
| 487 | core_initcall(rpm_clk_init); |
| 488 | |
| 489 | static void __exit rpm_clk_exit(void) |
| 490 | { |
| 491 | platform_driver_unregister(&rpm_clk_driver); |
| 492 | } |
| 493 | module_exit(rpm_clk_exit); |
| 494 | |
| 495 | MODULE_DESCRIPTION("Qualcomm RPM Clock Controller Driver"); |
| 496 | MODULE_LICENSE("GPL v2"); |
| 497 | MODULE_ALIAS("platform:qcom-clk-rpm"); |