drivers/usb/serial/keyspan.c

/*
  Keyspan USB to Serial Converter driver

  (C) Copyright (C) 2000-2001	Hugh Blemings <hugh@blemings.org>
  (C) Copyright (C) 2002	Greg Kroah-Hartman <greg@kroah.com>

  This program is free software; you can redistribute it and/or modify
  it under the terms of the GNU General Public License as published by
  the Free Software Foundation; either version 2 of the License, or
  (at your option) any later version.

  See http://misc.nu/hugh/keyspan.html for more information.

  Code in this driver inspired by and in a number of places taken
  from Brian Warner's original Keyspan-PDA driver.

  This driver has been put together with the support of Innosys, Inc.
  and Keyspan, Inc the manufacturers of the Keyspan USB-serial products.
  Thanks Guys :)

  Thanks to Paulus for miscellaneous tidy ups, some largish chunks
  of much nicer and/or completely new code and (perhaps most uniquely)
  having the patience to sit down and explain why and where he'd changed
  stuff.

  Tip 'o the hat to IBM (and previously Linuxcare :) for supporting
  staff in their work on open source projects.

  Change History

    2003sep04	LPM (Keyspan) add support for new single port product USA19HS.
				Improve setup message handling for all devices.

    Wed Feb 19 22:00:00 PST 2003 (Jeffrey S. Laing <keyspan@jsl.com>)
      Merged the current (1/31/03) Keyspan code with the current (2.4.21-pre4)
      Linux source tree.  The Linux tree lacked support for the 49WLC and
      others.  The Keyspan patches didn't work with the current kernel.

    2003jan30	LPM	add support for the 49WLC and MPR

    Wed Apr 25 12:00:00 PST 2002 (Keyspan)
      Started with Hugh Blemings' code dated Jan 17, 2002.  All adapters
      now supported (including QI and QW).  Modified port open, port
      close, and send setup() logic to fix various data and endpoint
      synchronization bugs and device LED status bugs.  Changed keyspan_
      write_room() to accurately return transmit buffer availability.
      Changed forwardingLength from 1 to 16 for all adapters.

    Fri Oct 12 16:45:00 EST 2001
      Preliminary USA-19QI and USA-28 support (both test OK for me, YMMV)

    Wed Apr 25 12:00:00 PST 2002 (Keyspan)
      Started with Hugh Blemings' code dated Jan 17, 2002.  All adapters
      now supported (including QI and QW).  Modified port open, port
      close, and send setup() logic to fix various data and endpoint
      synchronization bugs and device LED status bugs.  Changed keyspan_
      write_room() to accurately return transmit buffer availability.
      Changed forwardingLength from 1 to 16 for all adapters.

    Fri Oct 12 16:45:00 EST 2001
      Preliminary USA-19QI and USA-28 support (both test OK for me, YMMV)

    Mon Oct  8 14:29:00 EST 2001 hugh
      Fixed bug that prevented mulitport devices operating correctly
      if they weren't the first unit attached.

    Sat Oct  6 12:31:21 EST 2001 hugh
      Added support for USA-28XA and -28XB, misc cleanups, break support
      for usa26 based models thanks to David Gibson.

    Thu May 31 11:56:42 PDT 2001 gkh
      switched from using spinlock to a semaphore

    (04/08/2001) gb
	Identify version on module load.

    (11/01/2000) Adam J. Richter
	usb_device_id table support.

    Tue Oct 10 23:15:33 EST 2000 Hugh
      Merged Paul's changes with my USA-49W mods.  Work in progress
      still...

    Wed Jul 19 14:00:42 EST 2000 gkh
      Added module_init and module_exit functions to handle the fact that
      this driver is a loadable module now.

    Tue Jul 18 16:14:52 EST 2000 Hugh
      Basic character input/output for USA-19 now mostly works,
      fixed at 9600 baud for the moment.

    Sat Jul  8 11:11:48 EST 2000 Hugh
      First public release - nothing works except the firmware upload.
      Tested on PPC and x86 architectures, seems to behave...
*/


#include <linux/kernel.h>
#include <linux/jiffies.h>
#include <linux/errno.h>
#include <linux/init.h>
#include <linux/slab.h>
#include <linux/tty.h>
#include <linux/tty_driver.h>
#include <linux/tty_flip.h>
#include <linux/module.h>
#include <linux/spinlock.h>
#include <linux/firmware.h>
#include <linux/ihex.h>
#include <linux/uaccess.h>
#include <linux/usb.h>
#include <linux/usb/serial.h>
#include "keyspan.h"

static int debug;

/*
 * Version Information
 */
#define DRIVER_VERSION "v1.1.5"
#define DRIVER_AUTHOR "Hugh Blemings <hugh@misc.nu"
#define DRIVER_DESC "Keyspan USB to Serial Converter Driver"

#define INSTAT_BUFLEN	32
#define GLOCONT_BUFLEN	64
#define INDAT49W_BUFLEN	512

	/* Per device and per port private data */
struct keyspan_serial_private {
	const struct keyspan_device_details	*device_details;

	struct urb	*instat_urb;
	char		instat_buf[INSTAT_BUFLEN];

	/* added to support 49wg, where data from all 4 ports comes in
	   on 1 EP and high-speed supported */
	struct urb	*indat_urb;
	char		indat_buf[INDAT49W_BUFLEN];

	/* XXX this one probably will need a lock */
	struct urb	*glocont_urb;
	char		glocont_buf[GLOCONT_BUFLEN];
	char		ctrl_buf[8];	/* for EP0 control message */
};

struct keyspan_port_private {
	/* Keep track of which input & output endpoints to use */
	int		in_flip;
	int		out_flip;

	/* Keep duplicate of device details in each port
	   structure as well - simplifies some of the
	   callback functions etc. */
	const struct keyspan_device_details	*device_details;

	/* Input endpoints and buffer for this port */
	struct urb	*in_urbs[2];
	char		in_buffer[2][64];
	/* Output endpoints and buffer for this port */
	struct urb	*out_urbs[2];
	char		out_buffer[2][64];

	/* Input ack endpoint */
	struct urb	*inack_urb;
	char		inack_buffer[1];

	/* Output control endpoint */
	struct urb	*outcont_urb;
	char		outcont_buffer[64];

	/* Settings for the port */
	int		baud;
	int		old_baud;
	unsigned int	cflag;
	unsigned int	old_cflag;
	enum		{flow_none, flow_cts, flow_xon} flow_control;
	int		rts_state;	/* Handshaking pins (outputs) */
	int		dtr_state;
	int		cts_state;	/* Handshaking pins (inputs) */
	int		dsr_state;
	int		dcd_state;
	int		ri_state;
	int		break_on;

	unsigned long	tx_start_time[2];
	int		resend_cont;	/* need to resend control packet */
};

/* Include Keyspan message headers.  All current Keyspan Adapters
   make use of one of five message formats which are referred
   to as USA-26, USA-28, USA-49, USA-90, USA-67 by Keyspan and
   within this driver. */
#include "keyspan_usa26msg.h"
#include "keyspan_usa28msg.h"
#include "keyspan_usa49msg.h"
#include "keyspan_usa90msg.h"
#include "keyspan_usa67msg.h"


/* Functions used by new usb-serial code. */
static int __init keyspan_init(void)
{
	int retval;
	retval = usb_serial_register(&keyspan_pre_device);
	if (retval)
		goto failed_pre_device_register;
	retval = usb_serial_register(&keyspan_1port_device);
	if (retval)
		goto failed_1port_device_register;
	retval = usb_serial_register(&keyspan_2port_device);
	if (retval)
		goto failed_2port_device_register;
	retval = usb_serial_register(&keyspan_4port_device);
	if (retval)
		goto failed_4port_device_register;
	retval = usb_register(&keyspan_driver);
	if (retval)
		goto failed_usb_register;

	printk(KERN_INFO KBUILD_MODNAME ": " DRIVER_VERSION ":"
	       DRIVER_DESC "\n");

	return 0;
failed_usb_register:
	usb_serial_deregister(&keyspan_4port_device);
failed_4port_device_register:
	usb_serial_deregister(&keyspan_2port_device);
failed_2port_device_register:
	usb_serial_deregister(&keyspan_1port_device);
failed_1port_device_register:
	usb_serial_deregister(&keyspan_pre_device);
failed_pre_device_register:
	return retval;
}

static void __exit keyspan_exit(void)
{
	usb_deregister(&keyspan_driver);
	usb_serial_deregister(&keyspan_pre_device);
	usb_serial_deregister(&keyspan_1port_device);
	usb_serial_deregister(&keyspan_2port_device);
	usb_serial_deregister(&keyspan_4port_device);
}

module_init(keyspan_init);
module_exit(keyspan_exit);

static void keyspan_break_ctl(struct tty_struct *tty, int break_state)
{
	struct usb_serial_port *port = tty->driver_data;
	struct keyspan_port_private 	*p_priv;

	dbg("%s", __func__);

	p_priv = usb_get_serial_port_data(port);

	if (break_state == -1)
		p_priv->break_on = 1;
	else
		p_priv->break_on = 0;

	keyspan_send_setup(port, 0);
}


static void keyspan_set_termios(struct tty_struct *tty,
		struct usb_serial_port *port, struct ktermios *old_termios)
{
	int				baud_rate, device_port;
	struct keyspan_port_private 	*p_priv;
	const struct keyspan_device_details	*d_details;
	unsigned int 			cflag;

	dbg("%s", __func__);

	p_priv = usb_get_serial_port_data(port);
	d_details = p_priv->device_details;
	cflag = tty->termios->c_cflag;
	device_port = port->number - port->serial->minor;

	/* Baud rate calculation takes baud rate as an integer
	   so other rates can be generated if desired. */
	baud_rate = tty_get_baud_rate(tty);
	/* If no match or invalid, don't change */
	if (d_details->calculate_baud_rate(baud_rate, d_details->baudclk,
				NULL, NULL, NULL, device_port) == KEYSPAN_BAUD_RATE_OK) {
		/* FIXME - more to do here to ensure rate changes cleanly */
		/* FIXME - calcuate exact rate from divisor ? */
		p_priv->baud = baud_rate;
	} else
		baud_rate = tty_termios_baud_rate(old_termios);

	tty_encode_baud_rate(tty, baud_rate, baud_rate);
	/* set CTS/RTS handshake etc. */
	p_priv->cflag = cflag;
	p_priv->flow_control = (cflag & CRTSCTS)? flow_cts: flow_none;

	/* Mark/Space not supported */
	tty->termios->c_cflag &= ~CMSPAR;

	keyspan_send_setup(port, 0);
}

static int keyspan_tiocmget(struct tty_struct *tty, struct file *file)
{
	struct usb_serial_port *port = tty->driver_data;
	struct keyspan_port_private *p_priv = usb_get_serial_port_data(port);
	unsigned int			value;

	value = ((p_priv->rts_state) ? TIOCM_RTS : 0) |
		((p_priv->dtr_state) ? TIOCM_DTR : 0) |
		((p_priv->cts_state) ? TIOCM_CTS : 0) |
		((p_priv->dsr_state) ? TIOCM_DSR : 0) |
		((p_priv->dcd_state) ? TIOCM_CAR : 0) |
		((p_priv->ri_state) ? TIOCM_RNG : 0);

	return value;
}

static int keyspan_tiocmset(struct tty_struct *tty, struct file *file,
			    unsigned int set, unsigned int clear)
{
	struct usb_serial_port *port = tty->driver_data;
	struct keyspan_port_private *p_priv = usb_get_serial_port_data(port);

	if (set & TIOCM_RTS)
		p_priv->rts_state = 1;
	if (set & TIOCM_DTR)
		p_priv->dtr_state = 1;
	if (clear & TIOCM_RTS)
		p_priv->rts_state = 0;
	if (clear & TIOCM_DTR)
		p_priv->dtr_state = 0;
	keyspan_send_setup(port, 0);
	return 0;
}

/* Write function is similar for the four protocols used
   with only a minor change for usa90 (usa19hs) required */
static int keyspan_write(struct tty_struct *tty,
	struct usb_serial_port *port, const unsigned char *buf, int count)
{
	struct keyspan_port_private 	*p_priv;
	const struct keyspan_device_details	*d_details;
	int				flip;
	int 				left, todo;
	struct urb			*this_urb;
	int 				err, maxDataLen, dataOffset;

	p_priv = usb_get_serial_port_data(port);
	d_details = p_priv->device_details;

	if (d_details->msg_format == msg_usa90) {
		maxDataLen = 64;
		dataOffset = 0;
	} else {
		maxDataLen = 63;
		dataOffset = 1;
	}

	dbg("%s - for port %d (%d chars), flip=%d",
	    __func__, port->number, count, p_priv->out_flip);

	for (left = count; left > 0; left -= todo) {
		todo = left;
		if (todo > maxDataLen)
			todo = maxDataLen;

		flip = p_priv->out_flip;

		/* Check we have a valid urb/endpoint before we use it... */
		this_urb = p_priv->out_urbs[flip];
		if (this_urb == NULL) {
			/* no bulk out, so return 0 bytes written */
			dbg("%s - no output urb :(", __func__);
			return count;
		}

		dbg("%s - endpoint %d flip %d",
			__func__, usb_pipeendpoint(this_urb->pipe), flip);

		if (this_urb->status == -EINPROGRESS) {
			if (time_before(jiffies,
					p_priv->tx_start_time[flip] + 10 * HZ))
				break;
			usb_unlink_urb(this_urb);
			break;
		}

		/* First byte in buffer is "last flag" (except for usa19hx)
		   - unused so for now so set to zero */
		((char *)this_urb->transfer_buffer)[0] = 0;

		memcpy(this_urb->transfer_buffer + dataOffset, buf, todo);
		buf += todo;

		/* send the data out the bulk port */
		this_urb->transfer_buffer_length = todo + dataOffset;

		this_urb->dev = port->serial->dev;
		err = usb_submit_urb(this_urb, GFP_ATOMIC);
		if (err != 0)
			dbg("usb_submit_urb(write bulk) failed (%d)", err);
		p_priv->tx_start_time[flip] = jiffies;

		/* Flip for next time if usa26 or usa28 interface
		   (not used on usa49) */
		p_priv->out_flip = (flip + 1) & d_details->outdat_endp_flip;
	}

	return count - left;
}

static void	usa26_indat_callback(struct urb *urb)
{
	int			i, err;
	int			endpoint;
	struct usb_serial_port	*port;
	struct tty_struct	*tty;
	unsigned char 		*data = urb->transfer_buffer;
	int status = urb->status;

	dbg("%s", __func__);

	endpoint = usb_pipeendpoint(urb->pipe);

	if (status) {
		dbg("%s - nonzero status: %x on endpoint %d.",
		    __func__, status, endpoint);
		return;
	}

	port =  urb->context;
	tty = tty_port_tty_get(&port->port);
	if (tty && urb->actual_length) {
		/* 0x80 bit is error flag */
		if ((data[0] & 0x80) == 0) {
			/* no errors on individual bytes, only
			   possible overrun err */
			if (data[0] & RXERROR_OVERRUN)
				err = TTY_OVERRUN;
			else
				err = 0;
			for (i = 1; i < urb->actual_length ; ++i)
				tty_insert_flip_char(tty, data[i], err);
		} else {
			/* some bytes had errors, every byte has status */
			dbg("%s - RX error!!!!", __func__);
			for (i = 0; i + 1 < urb->actual_length; i += 2) {
				int stat = data[i], flag = 0;
				if (stat & RXERROR_OVERRUN)
					flag |= TTY_OVERRUN;
				if (stat & RXERROR_FRAMING)
					flag |= TTY_FRAME;
				if (stat & RXERROR_PARITY)
					flag |= TTY_PARITY;
				/* XXX should handle break (0x10) */
				tty_insert_flip_char(tty, data[i+1], flag);
			}
		}
		tty_flip_buffer_push(tty);
	}
	tty_kref_put(tty);

	/* Resubmit urb so we continue receiving */
	urb->dev = port->serial->dev;
	if (port->port.count) {
		err = usb_submit_urb(urb, GFP_ATOMIC);
		if (err != 0)
			dbg("%s - resubmit read urb failed. (%d)",
					__func__, err);
	}
	return;
}

/* Outdat handling is common for all devices */
static void	usa2x_outdat_callback(struct urb *urb)
{
	struct usb_serial_port *port;
	struct keyspan_port_private *p_priv;

	port =  urb->context;
	p_priv = usb_get_serial_port_data(port);
	dbg("%s - urb %d", __func__, urb == p_priv->out_urbs[1]);

	if (port->port.count)
		usb_serial_port_softint(port);
}

static void	usa26_inack_callback(struct urb *urb)
{
	dbg("%s", __func__);

}

static void	usa26_outcont_callback(struct urb *urb)
{
	struct usb_serial_port *port;
	struct keyspan_port_private *p_priv;

	port =  urb->context;
	p_priv = usb_get_serial_port_data(port);

	if (p_priv->resend_cont) {
		dbg("%s - sending setup", __func__);
		keyspan_usa26_send_setup(port->serial, port,
						p_priv->resend_cont - 1);
	}
}

static void	usa26_instat_callback(struct urb *urb)
{
	unsigned char 				*data = urb->transfer_buffer;
	struct keyspan_usa26_portStatusMessage	*msg;
	struct usb_serial			*serial;
	struct usb_serial_port			*port;
	struct keyspan_port_private	 	*p_priv;
	struct tty_struct			*tty;
	int old_dcd_state, err;
	int status = urb->status;

	serial =  urb->context;

	if (status) {
		dbg("%s - nonzero status: %x", __func__, status);
		return;
	}
	if (urb->actual_length != 9) {
		dbg("%s - %d byte report??", __func__, urb->actual_length);
		goto exit;
	}

	msg = (struct keyspan_usa26_portStatusMessage *)data;

#if 0
	dbg("%s - port status: port %d cts %d dcd %d dsr %d ri %d toff %d txoff %d rxen %d cr %d",
	    __func__, msg->port, msg->hskia_cts, msg->gpia_dcd, msg->dsr, msg->ri, msg->_txOff,
	    msg->_txXoff, msg->rxEnabled, msg->controlResponse);
#endif

	/* Now do something useful with the data */


	/* Check port number from message and retrieve private data */
	if (msg->port >= serial->num_ports) {
		dbg("%s - Unexpected port number %d", __func__, msg->port);
		goto exit;
	}
	port = serial->port[msg->port];
	p_priv = usb_get_serial_port_data(port);

	/* Update handshaking pin state information */
	old_dcd_state = p_priv->dcd_state;
	p_priv->cts_state = ((msg->hskia_cts) ? 1 : 0);
	p_priv->dsr_state = ((msg->dsr) ? 1 : 0);
	p_priv->dcd_state = ((msg->gpia_dcd) ? 1 : 0);
	p_priv->ri_state = ((msg->ri) ? 1 : 0);

	if (old_dcd_state != p_priv->dcd_state) {
		tty = tty_port_tty_get(&port->port);
		if (tty && !C_CLOCAL(tty))
			tty_hangup(tty);
		tty_kref_put(tty);
	}

	/* Resubmit urb so we continue receiving */
	urb->dev = serial->dev;
	err = usb_submit_urb(urb, GFP_ATOMIC);
	if (err != 0)
		dbg("%s - resubmit read urb failed. (%d)", __func__, err);
exit: ;
}

static void	usa26_glocont_callback(struct urb *urb)
{
	dbg("%s", __func__);
}


static void usa28_indat_callback(struct urb *urb)
{
	int                     err;
	struct usb_serial_port  *port;
	struct tty_struct       *tty;
	unsigned char           *data;
	struct keyspan_port_private             *p_priv;
	int status = urb->status;

	dbg("%s", __func__);

	port =  urb->context;
	p_priv = usb_get_serial_port_data(port);
	data = urb->transfer_buffer;

	if (urb != p_priv->in_urbs[p_priv->in_flip])
		return;

	do {
		if (status) {
			dbg("%s - nonzero status: %x on endpoint %d.",
			    __func__, status, usb_pipeendpoint(urb->pipe));
			return;
		}

		port =  urb->context;
		p_priv = usb_get_serial_port_data(port);
		data = urb->transfer_buffer;

		tty =tty_port_tty_get(&port->port);
		if (tty && urb->actual_length) {
			tty_insert_flip_string(tty, data, urb->actual_length);
			tty_flip_buffer_push(tty);
		}
		tty_kref_put(tty);

		/* Resubmit urb so we continue receiving */
		urb->dev = port->serial->dev;
		if (port->port.count) {
			err = usb_submit_urb(urb, GFP_ATOMIC);
			if (err != 0)
				dbg("%s - resubmit read urb failed. (%d)",
								__func__, err);
		}
		p_priv->in_flip ^= 1;

		urb = p_priv->in_urbs[p_priv->in_flip];
	} while (urb->status != -EINPROGRESS);
}

static void	usa28_inack_callback(struct urb *urb)
{
	dbg("%s", __func__);
}

static void	usa28_outcont_callback(struct urb *urb)
{
	struct usb_serial_port *port;
	struct keyspan_port_private *p_priv;

	port =  urb->context;
	p_priv = usb_get_serial_port_data(port);

	if (p_priv->resend_cont) {
		dbg("%s - sending setup", __func__);
		keyspan_usa28_send_setup(port->serial, port,
						p_priv->resend_cont - 1);
	}
}

static void	usa28_instat_callback(struct urb *urb)
{
	int					err;
	unsigned char 				*data = urb->transfer_buffer;
	struct keyspan_usa28_portStatusMessage	*msg;
	struct usb_serial			*serial;
	struct usb_serial_port			*port;
	struct keyspan_port_private	 	*p_priv;
	struct tty_struct			*tty;
	int old_dcd_state;
	int status = urb->status;

	serial =  urb->context;

	if (status) {
		dbg("%s - nonzero status: %x", __func__, status);
		return;
	}

	if (urb->actual_length != sizeof(struct keyspan_usa28_portStatusMessage)) {
		dbg("%s - bad length %d", __func__, urb->actual_length);
		goto exit;
	}

	/*dbg("%s %x %x %x %x %x %x %x %x %x %x %x %x", __func__
	    data[0], data[1], data[2], data[3], data[4], data[5],
	    data[6], data[7], data[8], data[9], data[10], data[11]);*/

	/* Now do something useful with the data */
	msg = (struct keyspan_usa28_portStatusMessage *)data;

	/* Check port number from message and retrieve private data */
	if (msg->port >= serial->num_ports) {
		dbg("%s - Unexpected port number %d", __func__, msg->port);
		goto exit;
	}
	port = serial->port[msg->port];
	p_priv = usb_get_serial_port_data(port);

	/* Update handshaking pin state information */
	old_dcd_state = p_priv->dcd_state;
	p_priv->cts_state = ((msg->cts) ? 1 : 0);
	p_priv->dsr_state = ((msg->dsr) ? 1 : 0);
	p_priv->dcd_state = ((msg->dcd) ? 1 : 0);
	p_priv->ri_state = ((msg->ri) ? 1 : 0);

	if( old_dcd_state != p_priv->dcd_state && old_dcd_state) {
		tty = tty_port_tty_get(&port->port);
		if (tty && !C_CLOCAL(tty)) 
			tty_hangup(tty);
		tty_kref_put(tty);
	}

		/* Resubmit urb so we continue receiving */
	urb->dev = serial->dev;
	err = usb_submit_urb(urb, GFP_ATOMIC);
	if (err != 0)
		dbg("%s - resubmit read urb failed. (%d)", __func__, err);
exit: ;
}

static void	usa28_glocont_callback(struct urb *urb)
{
	dbg("%s", __func__);
}


static void	usa49_glocont_callback(struct urb *urb)
{
	struct usb_serial *serial;
	struct usb_serial_port *port;
	struct keyspan_port_private *p_priv;
	int i;

	dbg("%s", __func__);

	serial =  urb->context;
	for (i = 0; i < serial->num_ports; ++i) {
		port = serial->port[i];
		p_priv = usb_get_serial_port_data(port);

		if (p_priv->resend_cont) {
			dbg("%s - sending setup", __func__);
			keyspan_usa49_send_setup(serial, port,
						p_priv->resend_cont - 1);
			break;
		}
	}
}

	/* This is actually called glostat in the Keyspan
	   doco */
static void	usa49_instat_callback(struct urb *urb)
{
	int					err;
	unsigned char 				*data = urb->transfer_buffer;
	struct keyspan_usa49_portStatusMessage	*msg;
	struct usb_serial			*serial;
	struct usb_serial_port			*port;
	struct keyspan_port_private	 	*p_priv;
	int old_dcd_state;
	int status = urb->status;

	dbg("%s", __func__);

	serial =  urb->context;

	if (status) {
		dbg("%s - nonzero status: %x", __func__, status);
		return;
	}

	if (urb->actual_length !=
			sizeof(struct keyspan_usa49_portStatusMessage)) {
		dbg("%s - bad length %d", __func__, urb->actual_length);
		goto exit;
	}

	/*dbg(" %x %x %x %x %x %x %x %x %x %x %x", __func__,
	    data[0], data[1], data[2], data[3], data[4], data[5],
	    data[6], data[7], data[8], data[9], data[10]);*/

	/* Now do something useful with the data */
	msg = (struct keyspan_usa49_portStatusMessage *)data;

	/* Check port number from message and retrieve private data */
	if (msg->portNumber >= serial->num_ports) {
		dbg("%s - Unexpected port number %d",
					__func__, msg->portNumber);
		goto exit;
	}
	port = serial->port[msg->portNumber];
	p_priv = usb_get_serial_port_data(port);

	/* Update handshaking pin state information */
	old_dcd_state = p_priv->dcd_state;
	p_priv->cts_state = ((msg->cts) ? 1 : 0);
	p_priv->dsr_state = ((msg->dsr) ? 1 : 0);
	p_priv->dcd_state = ((msg->dcd) ? 1 : 0);
	p_priv->ri_state = ((msg->ri) ? 1 : 0);

	if (old_dcd_state != p_priv->dcd_state && old_dcd_state) {
		struct tty_struct *tty = tty_port_tty_get(&port->port);
		if (tty && !C_CLOCAL(tty))
			tty_hangup(tty);
		tty_kref_put(tty);
	}

	/* Resubmit urb so we continue receiving */
	urb->dev = serial->dev;

	err = usb_submit_urb(urb, GFP_ATOMIC);
	if (err != 0)
		dbg("%s - resubmit read urb failed. (%d)", __func__, err);
exit:	;
}

static void	usa49_inack_callback(struct urb *urb)
{
	dbg("%s", __func__);
}

static void	usa49_indat_callback(struct urb *urb)
{
	int			i, err;
	int			endpoint;
	struct usb_serial_port	*port;
	struct tty_struct	*tty;
	unsigned char 		*data = urb->transfer_buffer;
	int status = urb->status;

	dbg("%s", __func__);

	endpoint = usb_pipeendpoint(urb->pipe);

	if (status) {
		dbg("%s - nonzero status: %x on endpoint %d.", __func__,
		    status, endpoint);
		return;
	}

	port =  urb->context;
	tty = tty_port_tty_get(&port->port);
	if (tty && urb->actual_length) {
		/* 0x80 bit is error flag */
		if ((data[0] & 0x80) == 0) {
			/* no error on any byte */
			tty_insert_flip_string(tty, data + 1,
						urb->actual_length - 1);
		} else {
			/* some bytes had errors, every byte has status */
			for (i = 0; i + 1 < urb->actual_length; i += 2) {
				int stat = data[i], flag = 0;
				if (stat & RXERROR_OVERRUN)
					flag |= TTY_OVERRUN;
				if (stat & RXERROR_FRAMING)
					flag |= TTY_FRAME;
				if (stat & RXERROR_PARITY)
					flag |= TTY_PARITY;
				/* XXX should handle break (0x10) */
				tty_insert_flip_char(tty, data[i+1], flag);
			}
		}
		tty_flip_buffer_push(tty);
	}
	tty_kref_put(tty);

	/* Resubmit urb so we continue receiving */
	urb->dev = port->serial->dev;
	if (port->port.count) {
		err = usb_submit_urb(urb, GFP_ATOMIC);
		if (err != 0)
			dbg("%s - resubmit read urb failed. (%d)",
							__func__, err);
	}
}

static void usa49wg_indat_callback(struct urb *urb)
{
	int			i, len, x, err;
	struct usb_serial	*serial;
	struct usb_serial_port	*port;
	struct tty_struct	*tty;
	unsigned char 		*data = urb->transfer_buffer;
	int status = urb->status;

	dbg("%s", __func__);

	serial = urb->context;

	if (status) {
		dbg("%s - nonzero status: %x", __func__, status);
		return;
	}

	/* inbound data is in the form P#, len, status, data */
	i = 0;
	len = 0;

	if (urb->actual_length) {
		while (i < urb->actual_length) {

			/* Check port number from message*/
			if (data[i] >= serial->num_ports) {
				dbg("%s - Unexpected port number %d",
					__func__, data[i]);
				return;
			}
			port = serial->port[data[i++]];
			tty = tty_port_tty_get(&port->port);
			len = data[i++];

			/* 0x80 bit is error flag */
			if ((data[i] & 0x80) == 0) {
				/* no error on any byte */
				i++;
				for (x = 1; x < len ; ++x)
					if (port->port.count)
						tty_insert_flip_char(tty,
								data[i++], 0);
					else
						i++;
			} else {
				/*
				 * some bytes had errors, every byte has status
				 */
				for (x = 0; x + 1 < len; x += 2) {
					int stat = data[i], flag = 0;
					if (stat & RXERROR_OVERRUN)
						flag |= TTY_OVERRUN;
					if (stat & RXERROR_FRAMING)
						flag |= TTY_FRAME;
					if (stat & RXERROR_PARITY)
						flag |= TTY_PARITY;
					/* XXX should handle break (0x10) */
					if (port->port.count)
						tty_insert_flip_char(tty,
							data[i+1], flag);
					i += 2;
				}
			}
			if (port->port.count)
				tty_flip_buffer_push(tty);
			tty_kref_put(tty);
		}
	}

	/* Resubmit urb so we continue receiving */
	urb->dev = serial->dev;

	err = usb_submit_urb(urb, GFP_ATOMIC);
	if (err != 0)
		dbg("%s - resubmit read urb failed. (%d)", __func__, err);
}

/* not used, usa-49 doesn't have per-port control endpoints */
static void usa49_outcont_callback(struct urb *urb)
{
	dbg("%s", __func__);
}

static void usa90_indat_callback(struct urb *urb)
{
	int			i, err;
	int			endpoint;
	struct usb_serial_port	*port;
	struct keyspan_port_private	 	*p_priv;
	struct tty_struct	*tty;
	unsigned char 		*data = urb->transfer_buffer;
	int status = urb->status;

	dbg("%s", __func__);

	endpoint = usb_pipeendpoint(urb->pipe);

	if (status) {
		dbg("%s - nonzero status: %x on endpoint %d.",
		    __func__, status, endpoint);
		return;
	}

	port =  urb->context;
	p_priv = usb_get_serial_port_data(port);

	if (urb->actual_length) {
		tty = tty_port_tty_get(&port->port);
		/* if current mode is DMA, looks like usa28 format
		   otherwise looks like usa26 data format */

		if (p_priv->baud > 57600)
			tty_insert_flip_string(tty, data, urb->actual_length);
		else {
			/* 0x80 bit is error flag */
			if ((data[0] & 0x80) == 0) {
				/* no errors on individual bytes, only
				   possible overrun err*/
				if (data[0] & RXERROR_OVERRUN)
					err = TTY_OVERRUN;
				else
					err = 0;
				for (i = 1; i < urb->actual_length ; ++i)
					tty_insert_flip_char(tty, data[i],
									err);
			}  else {
			/* some bytes had errors, every byte has status */
				dbg("%s - RX error!!!!", __func__);
				for (i = 0; i + 1 < urb->actual_length; i += 2) {
					int stat = data[i], flag = 0;
					if (stat & RXERROR_OVERRUN)
						flag |= TTY_OVERRUN;
					if (stat & RXERROR_FRAMING)
						flag |= TTY_FRAME;
					if (stat & RXERROR_PARITY)
						flag |= TTY_PARITY;
					/* XXX should handle break (0x10) */
					tty_insert_flip_char(tty, data[i+1],
									flag);
				}
			}
		}
		tty_flip_buffer_push(tty);
		tty_kref_put(tty);
	}

	/* Resubmit urb so we continue receiving */
	urb->dev = port->serial->dev;
	if (port->port.count) {
		err = usb_submit_urb(urb, GFP_ATOMIC);
		if (err != 0)
			dbg("%s - resubmit read urb failed. (%d)",
							__func__, err);
	}
	return;
}


static void	usa90_instat_callback(struct urb *urb)
{
	unsigned char 				*data = urb->transfer_buffer;
	struct keyspan_usa90_portStatusMessage	*msg;
	struct usb_serial			*serial;
	struct usb_serial_port			*port;
	struct keyspan_port_private	 	*p_priv;
	struct tty_struct			*tty;
	int old_dcd_state, err;
	int status = urb->status;

	serial =  urb->context;

	if (status) {
		dbg("%s - nonzero status: %x", __func__, status);
		return;
	}
	if (urb->actual_length < 14) {
		dbg("%s - %d byte report??", __func__, urb->actual_length);
		goto exit;
	}

	msg = (struct keyspan_usa90_portStatusMessage *)data;

	/* Now do something useful with the data */

	port = serial->port[0];
	p_priv = usb_get_serial_port_data(port);

	/* Update handshaking pin state information */
	old_dcd_state = p_priv->dcd_state;
	p_priv->cts_state = ((msg->cts) ? 1 : 0);
	p_priv->dsr_state = ((msg->dsr) ? 1 : 0);
	p_priv->dcd_state = ((msg->dcd) ? 1 : 0);
	p_priv->ri_state = ((msg->ri) ? 1 : 0);

	if (old_dcd_state != p_priv->dcd_state && old_dcd_state) {
		tty = tty_port_tty_get(&port->port);
		if (tty && !C_CLOCAL(tty))
			tty_hangup(tty);
		tty_kref_put(tty);
	}

	/* Resubmit urb so we continue receiving */
	urb->dev = serial->dev;
	err = usb_submit_urb(urb, GFP_ATOMIC);
	if (err != 0)
		dbg("%s - resubmit read urb failed. (%d)", __func__, err);
exit:
	;
}

static void	usa90_outcont_callback(struct urb *urb)
{
	struct usb_serial_port *port;
	struct keyspan_port_private *p_priv;

	port =  urb->context;
	p_priv = usb_get_serial_port_data(port);

	if (p_priv->resend_cont) {
		dbg("%s - sending setup", __func__);
		keyspan_usa90_send_setup(port->serial, port,
						p_priv->resend_cont - 1);
	}
}

/* Status messages from the 28xg */
static void	usa67_instat_callback(struct urb *urb)
{
	int					err;
	unsigned char 				*data = urb->transfer_buffer;
	struct keyspan_usa67_portStatusMessage	*msg;
	struct usb_serial			*serial;
	struct usb_serial_port			*port;
	struct keyspan_port_private	 	*p_priv;
	int old_dcd_state;
	int status = urb->status;

	dbg("%s", __func__);

	serial = urb->context;

	if (status) {
		dbg("%s - nonzero status: %x", __func__, status);
		return;
	}

	if (urb->actual_length !=
			sizeof(struct keyspan_usa67_portStatusMessage)) {
		dbg("%s - bad length %d", __func__, urb->actual_length);
		return;
	}


	/* Now do something useful with the data */
	msg = (struct keyspan_usa67_portStatusMessage *)data;

	/* Check port number from message and retrieve private data */
	if (msg->port >= serial->num_ports) {
		dbg("%s - Unexpected port number %d", __func__, msg->port);
		return;
	}

	port = serial->port[msg->port];
	p_priv = usb_get_serial_port_data(port);

	/* Update handshaking pin state information */
	old_dcd_state = p_priv->dcd_state;
	p_priv->cts_state = ((msg->hskia_cts) ? 1 : 0);
	p_priv->dcd_state = ((msg->gpia_dcd) ? 1 : 0);

	if (old_dcd_state != p_priv->dcd_state && old_dcd_state) {
		struct tty_struct *tty = tty_port_tty_get(&port->port);
		if (tty && !C_CLOCAL(tty))
			tty_hangup(tty);
		tty_kref_put(tty);
	}

	/* Resubmit urb so we continue receiving */
	urb->dev = serial->dev;
	err = usb_submit_urb(urb, GFP_ATOMIC);
	if (err != 0)
		dbg("%s - resubmit read urb failed. (%d)", __func__, err);
}

static void usa67_glocont_callback(struct urb *urb)
{
	struct usb_serial *serial;
	struct usb_serial_port *port;
	struct keyspan_port_private *p_priv;
	int i;

	dbg("%s", __func__);

	serial = urb->context;
	for (i = 0; i < serial->num_ports; ++i) {
		port = serial->port[i];
		p_priv = usb_get_serial_port_data(port);

		if (p_priv->resend_cont) {
			dbg("%s - sending setup", __func__);
			keyspan_usa67_send_setup(serial, port,
						p_priv->resend_cont - 1);
			break;
		}
	}
}

static int keyspan_write_room(struct tty_struct *tty)
{
	struct usb_serial_port *port = tty->driver_data;
	struct keyspan_port_private	*p_priv;
	const struct keyspan_device_details	*d_details;
	int				flip;
	int				data_len;
	struct urb			*this_urb;

	dbg("%s", __func__);
	p_priv = usb_get_serial_port_data(port);
	d_details = p_priv->device_details;

	/* FIXME: locking */
	if (d_details->msg_format == msg_usa90)
		data_len = 64;
	else
		data_len = 63;

	flip = p_priv->out_flip;

	/* Check both endpoints to see if any are available. */
	this_urb = p_priv->out_urbs[flip];
	if (this_urb != NULL) {
		if (this_urb->status != -EINPROGRESS)
			return data_len;
		flip = (flip + 1) & d_details->outdat_endp_flip;
		this_urb = p_priv->out_urbs[flip];
		if (this_urb != NULL) {
			if (this_urb->status != -EINPROGRESS)
				return data_len;
		}
	}
	return 0;
}


static int keyspan_open(struct tty_struct *tty, struct usb_serial_port *port)
{
	struct keyspan_port_private 	*p_priv;
	struct keyspan_serial_private 	*s_priv;
	struct usb_serial 		*serial = port->serial;
	const struct keyspan_device_details	*d_details;
	int				i, err;
	int				baud_rate, device_port;
	struct urb			*urb;
	unsigned int			cflag = 0;

	s_priv = usb_get_serial_data(serial);
	p_priv = usb_get_serial_port_data(port);
	d_details = p_priv->device_details;

	dbg("%s - port%d.", __func__, port->number);

	/* Set some sane defaults */
	p_priv->rts_state = 1;
	p_priv->dtr_state = 1;
	p_priv->baud = 9600;

	/* force baud and lcr to be set on open */
	p_priv->old_baud = 0;
	p_priv->old_cflag = 0;

	p_priv->out_flip = 0;
	p_priv->in_flip = 0;

	/* Reset low level data toggle and start reading from endpoints */
	for (i = 0; i < 2; i++) {
		urb = p_priv->in_urbs[i];
		if (urb == NULL)
			continue;
		urb->dev = serial->dev;

		/* make sure endpoint data toggle is synchronized
		   with the device */
		usb_clear_halt(urb->dev, urb->pipe);
		err = usb_submit_urb(urb, GFP_KERNEL);
		if (err != 0)
			dbg("%s - submit urb %d failed (%d)",
							__func__, i, err);
	}

	/* Reset low level data toggle on out endpoints */
	for (i = 0; i < 2; i++) {
		urb = p_priv->out_urbs[i];
		if (urb == NULL)
			continue;
		urb->dev = serial->dev;
		/* usb_settoggle(urb->dev, usb_pipeendpoint(urb->pipe),
						usb_pipeout(urb->pipe), 0); */
	}

	/* get the terminal config for the setup message now so we don't
	 * need to send 2 of them */

	device_port = port->number - port->serial->minor;
	if (tty) {
		cflag = tty->termios->c_cflag;
		/* Baud rate calculation takes baud rate as an integer
		   so other rates can be generated if desired. */
		baud_rate = tty_get_baud_rate(tty);
		/* If no match or invalid, leave as default */
		if (baud_rate >= 0
		    && d_details->calculate_baud_rate(baud_rate, d_details->baudclk,
					NULL, NULL, NULL, device_port) == KEYSPAN_BAUD_RATE_OK) {
			p_priv->baud = baud_rate;
		}
	}
	/* set CTS/RTS handshake etc. */
	p_priv->cflag = cflag;
	p_priv->flow_control = (cflag & CRTSCTS)? flow_cts: flow_none;

	keyspan_send_setup(port, 1);
	/* mdelay(100); */
	/* keyspan_set_termios(port, NULL); */

	return 0;
}

static inline void stop_urb(struct urb *urb)
{
	if (urb && urb->status == -EINPROGRESS)
		usb_kill_urb(urb);
}

static void keyspan_dtr_rts(struct usb_serial_port *port, int on)
{
	struct keyspan_port_private *p_priv = usb_get_serial_port_data(port);

	p_priv->rts_state = on;
	p_priv->dtr_state = on;
	keyspan_send_setup(port, 0);
}

static void keyspan_close(struct usb_serial_port *port)
{
	int			i;
	struct usb_serial	*serial = port->serial;
	struct keyspan_serial_private 	*s_priv;
	struct keyspan_port_private 	*p_priv;

	dbg("%s", __func__);
	s_priv = usb_get_serial_data(serial);
	p_priv = usb_get_serial_port_data(port);

	p_priv->rts_state = 0;
	p_priv->dtr_state = 0;

	if (serial->dev) {
		keyspan_send_setup(port, 2);
		/* pilot-xfer seems to work best with this delay */
		mdelay(100);
		/* keyspan_set_termios(port, NULL); */
	}

	/*while (p_priv->outcont_urb->status == -EINPROGRESS) {
		dbg("%s - urb in progress", __func__);
	}*/

	p_priv->out_flip = 0;
	p_priv->in_flip = 0;

	if (serial->dev) {
		/* Stop reading/writing urbs */
		stop_urb(p_priv->inack_urb);
		/* stop_urb(p_priv->outcont_urb); */
		for (i = 0; i < 2; i++) {
			stop_urb(p_priv->in_urbs[i]);
			stop_urb(p_priv->out_urbs[i]);
		}
	}
}

/* download the firmware to a pre-renumeration device */
static int keyspan_fake_startup(struct usb_serial *serial)
{
	int 				response;
	const struct ihex_binrec 	*record;
	char				*fw_name;
	const struct firmware		*fw;

	dbg("Keyspan startup version %04x product %04x",
	    le16_to_cpu(serial->dev->descriptor.bcdDevice),
	    le16_to_cpu(serial->dev->descriptor.idProduct));

	if ((le16_to_cpu(serial->dev->descriptor.bcdDevice) & 0x8000)
								!= 0x8000) {
		dbg("Firmware already loaded.  Quitting.");
		return 1;
	}

		/* Select firmware image on the basis of idProduct */
	switch (le16_to_cpu(serial->dev->descriptor.idProduct)) {
	case keyspan_usa28_pre_product_id:
		fw_name = "keyspan/usa28.fw";
		break;

	case keyspan_usa28x_pre_product_id:
		fw_name = "keyspan/usa28x.fw";
		break;

	case keyspan_usa28xa_pre_product_id:
		fw_name = "keyspan/usa28xa.fw";
		break;

	case keyspan_usa28xb_pre_product_id:
		fw_name = "keyspan/usa28xb.fw";
		break;

	case keyspan_usa19_pre_product_id:
		fw_name = "keyspan/usa19.fw";
		break;

	case keyspan_usa19qi_pre_product_id:
		fw_name = "keyspan/usa19qi.fw";
		break;

	case keyspan_mpr_pre_product_id:
		fw_name = "keyspan/mpr.fw";
		break;

	case keyspan_usa19qw_pre_product_id:
		fw_name = "keyspan/usa19qw.fw";
		break;

	case keyspan_usa18x_pre_product_id:
		fw_name = "keyspan/usa18x.fw";
		break;

	case keyspan_usa19w_pre_product_id:
		fw_name = "keyspan/usa19w.fw";
		break;

	case keyspan_usa49w_pre_product_id:
		fw_name = "keyspan/usa49w.fw";
		break;

	case keyspan_usa49wlc_pre_product_id:
		fw_name = "keyspan/usa49wlc.fw";
		break;

	default:
		dev_err(&serial->dev->dev, "Unknown product ID (%04x)\n",
			le16_to_cpu(serial->dev->descriptor.idProduct));
		return 1;
	}

	if (request_ihex_firmware(&fw, fw_name, &serial->dev->dev)) {
		dev_err(&serial->dev->dev, "Required keyspan firmware image (%s) unavailable.\n", fw_name);
		return(1);
	}

	dbg("Uploading Keyspan %s firmware.", fw_name);

		/* download the firmware image */
	response = ezusb_set_reset(serial, 1);

	record = (const struct ihex_binrec *)fw->data;

	while (record) {
		response = ezusb_writememory(serial, be32_to_cpu(record->addr),
					     (unsigned char *)record->data,
					     be16_to_cpu(record->len), 0xa0);
		if (response < 0) {
			dev_err(&serial->dev->dev, "ezusb_writememory failed for Keyspan firmware (%d %04X %p %d)\n",
				response, be32_to_cpu(record->addr),
				record->data, be16_to_cpu(record->len));
			break;
		}
		record = ihex_next_binrec(record);
	}
	release_firmware(fw);
		/* bring device out of reset. Renumeration will occur in a
		   moment and the new device will bind to the real driver */
	response = ezusb_set_reset(serial, 0);

	/* we don't want this device to have a driver assigned to it. */
	return 1;
}

/* Helper functions used by keyspan_setup_urbs */
static struct usb_endpoint_descriptor const *find_ep(struct usb_serial const *serial,
						     int endpoint)
{
	struct usb_host_interface *iface_desc;
	struct usb_endpoint_descriptor *ep;
	int i;

	iface_desc = serial->interface->cur_altsetting;
	for (i = 0; i < iface_desc->desc.bNumEndpoints; ++i) {
		ep = &iface_desc->endpoint[i].desc;
		if (ep->bEndpointAddress == endpoint)
			return ep;
	}
	dev_warn(&serial->interface->dev, "found no endpoint descriptor for "
		 "endpoint %x\n", endpoint);
	return NULL;
}

static struct urb *keyspan_setup_urb(struct usb_serial *serial, int endpoint,
				      int dir, void *ctx, char *buf, int len,
				      void (*callback)(struct urb *))
{
	struct urb *urb;
	struct usb_endpoint_descriptor const *ep_desc;
	char const *ep_type_name;

	if (endpoint == -1)
		return NULL;		/* endpoint not needed */

	dbg("%s - alloc for endpoint %d.", __func__, endpoint);
	urb = usb_alloc_urb(0, GFP_KERNEL);		/* No ISO */
	if (urb == NULL) {
		dbg("%s - alloc for endpoint %d failed.", __func__, endpoint);
		return NULL;
	}

	if (endpoint == 0) {
		/* control EP filled in when used */
		return urb;
	}

	ep_desc = find_ep(serial, endpoint);
	if (!ep_desc) {
		/* leak the urb, something's wrong and the callers don't care */
		return urb;
	}
	if (usb_endpoint_xfer_int(ep_desc)) {
		ep_type_name = "INT";
		usb_fill_int_urb(urb, serial->dev,
				 usb_sndintpipe(serial->dev, endpoint) | dir,
				 buf, len, callback, ctx,
				 ep_desc->bInterval);
	} else if (usb_endpoint_xfer_bulk(ep_desc)) {
		ep_type_name = "BULK";
		usb_fill_bulk_urb(urb, serial->dev,
				  usb_sndbulkpipe(serial->dev, endpoint) | dir,
				  buf, len, callback, ctx);
	} else {
		dev_warn(&serial->interface->dev,
			 "unsupported endpoint type %x\n",
			 usb_endpoint_type(ep_desc));
		usb_free_urb(urb);
		return NULL;
	}

	dbg("%s - using urb %p for %s endpoint %x",
	    __func__, urb, ep_type_name, endpoint);
	return urb;
}

static struct callbacks {
	void	(*instat_callback)(struct urb *);
	void	(*glocont_callback)(struct urb *);
	void	(*indat_callback)(struct urb *);
	void	(*outdat_callback)(struct urb *);
	void	(*inack_callback)(struct urb *);
	void	(*outcont_callback)(struct urb *);
} keyspan_callbacks[] = {
	{
		/* msg_usa26 callbacks */
		.instat_callback =	usa26_instat_callback,
		.glocont_callback =	usa26_glocont_callback,
		.indat_callback =	usa26_indat_callback,
		.outdat_callback =	usa2x_outdat_callback,
		.inack_callback =	usa26_inack_callback,
		.outcont_callback =	usa26_outcont_callback,
	}, {
		/* msg_usa28 callbacks */
		.instat_callback =	usa28_instat_callback,
		.glocont_callback =	usa28_glocont_callback,
		.indat_callback =	usa28_indat_callback,
		.outdat_callback =	usa2x_outdat_callback,
		.inack_callback =	usa28_inack_callback,
		.outcont_callback =	usa28_outcont_callback,
	}, {
		/* msg_usa49 callbacks */
		.instat_callback =	usa49_instat_callback,
		.glocont_callback =	usa49_glocont_callback,
		.indat_callback =	usa49_indat_callback,
		.outdat_callback =	usa2x_outdat_callback,
		.inack_callback =	usa49_inack_callback,
		.outcont_callback =	usa49_outcont_callback,
	}, {
		/* msg_usa90 callbacks */
		.instat_callback =	usa90_instat_callback,
		.glocont_callback =	usa28_glocont_callback,
		.indat_callback =	usa90_indat_callback,
		.outdat_callback =	usa2x_outdat_callback,
		.inack_callback =	usa28_inack_callback,
		.outcont_callback =	usa90_outcont_callback,
	}, {
		/* msg_usa67 callbacks */
		.instat_callback =	usa67_instat_callback,
		.glocont_callback =	usa67_glocont_callback,
		.indat_callback =	usa26_indat_callback,
		.outdat_callback =	usa2x_outdat_callback,
		.inack_callback =	usa26_inack_callback,
		.outcont_callback =	usa26_outcont_callback,
	}
};

	/* Generic setup urbs function that uses
	   data in device_details */
static void keyspan_setup_urbs(struct usb_serial *serial)
{
	int				i, j;
	struct keyspan_serial_private 	*s_priv;
	const struct keyspan_device_details	*d_details;
	struct usb_serial_port		*port;
	struct keyspan_port_private	*p_priv;
	struct callbacks		*cback;
	int				endp;

	dbg("%s", __func__);

	s_priv = usb_get_serial_data(serial);
	d_details = s_priv->device_details;

	/* Setup values for the various callback routines */
	cback = &keyspan_callbacks[d_details->msg_format];

	/* Allocate and set up urbs for each one that is in use,
	   starting with instat endpoints */
	s_priv->instat_urb = keyspan_setup_urb
		(serial, d_details->instat_endpoint, USB_DIR_IN,
		 serial, s_priv->instat_buf, INSTAT_BUFLEN,
		 cback->instat_callback);

	s_priv->indat_urb = keyspan_setup_urb
		(serial, d_details->indat_endpoint, USB_DIR_IN,
		 serial, s_priv->indat_buf, INDAT49W_BUFLEN,
		 usa49wg_indat_callback);

	s_priv->glocont_urb = keyspan_setup_urb
		(serial, d_details->glocont_endpoint, USB_DIR_OUT,
		 serial, s_priv->glocont_buf, GLOCONT_BUFLEN,
		 cback->glocont_callback);

	/* Setup endpoints for each port specific thing */
	for (i = 0; i < d_details->num_ports; i++) {
		port = serial->port[i];
		p_priv = usb_get_serial_port_data(port);

		/* Do indat endpoints first, once for each flip */
		endp = d_details->indat_endpoints[i];
		for (j = 0; j <= d_details->indat_endp_flip; ++j, ++endp) {
			p_priv->in_urbs[j] = keyspan_setup_urb
				(serial, endp, USB_DIR_IN, port,
				 p_priv->in_buffer[j], 64,
				 cback->indat_callback);
		}
		for (; j < 2; ++j)
			p_priv->in_urbs[j] = NULL;

		/* outdat endpoints also have flip */
		endp = d_details->outdat_endpoints[i];
		for (j = 0; j <= d_details->outdat_endp_flip; ++j, ++endp) {
			p_priv->out_urbs[j] = keyspan_setup_urb
				(serial, endp, USB_DIR_OUT, port,
				 p_priv->out_buffer[j], 64,
				 cback->outdat_callback);
		}
		for (; j < 2; ++j)
			p_priv->out_urbs[j] = NULL;

		/* inack endpoint */
		p_priv->inack_urb = keyspan_setup_urb
			(serial, d_details->inack_endpoints[i], USB_DIR_IN,
			 port, p_priv->inack_buffer, 1, cback->inack_callback);

		/* outcont endpoint */
		p_priv->outcont_urb = keyspan_setup_urb
			(serial, d_details->outcont_endpoints[i], USB_DIR_OUT,
			 port, p_priv->outcont_buffer, 64,
			 cback->outcont_callback);
	}
}

/* usa19 function doesn't require prescaler */
static int keyspan_usa19_calc_baud(u32 baud_rate, u32 baudclk, u8 *rate_hi,
				   u8 *rate_low, u8 *prescaler, int portnum)
{
	u32 	b16,	/* baud rate times 16 (actual rate used internally) */
		div,	/* divisor */
		cnt;	/* inverse of divisor (programmed into 8051) */

	dbg("%s - %d.", __func__, baud_rate);

	/* prevent divide by zero...  */
	b16 = baud_rate * 16L;
	if (b16 == 0)
		return KEYSPAN_INVALID_BAUD_RATE;
	/* Any "standard" rate over 57k6 is marginal on the USA-19
	   as we run out of divisor resolution. */
	if (baud_rate > 57600)
		return KEYSPAN_INVALID_BAUD_RATE;

	/* calculate the divisor and the counter (its inverse) */
	div = baudclk / b16;
	if (div == 0)
		return KEYSPAN_INVALID_BAUD_RATE;
	else
		cnt = 0 - div;

	if (div > 0xffff)
		return KEYSPAN_INVALID_BAUD_RATE;

	/* return the counter values if non-null */
	if (rate_low)
		*rate_low = (u8) (cnt & 0xff);
	if (rate_hi)
		*rate_hi = (u8) ((cnt >> 8) & 0xff);
	if (rate_low && rate_hi)
		dbg("%s - %d %02x %02x.",
				__func__, baud_rate, *rate_hi, *rate_low);
	return KEYSPAN_BAUD_RATE_OK;
}

/* usa19hs function doesn't require prescaler */
static int keyspan_usa19hs_calc_baud(u32 baud_rate, u32 baudclk, u8 *rate_hi,
				   u8 *rate_low, u8 *prescaler, int portnum)
{
	u32 	b16,	/* baud rate times 16 (actual rate used internally) */
			div;	/* divisor */

	dbg("%s - %d.", __func__, baud_rate);

	/* prevent divide by zero...  */
	b16 = baud_rate * 16L;
	if (b16 == 0)
		return KEYSPAN_INVALID_BAUD_RATE;

	/* calculate the divisor */
	div = baudclk / b16;
	if (div == 0)
		return KEYSPAN_INVALID_BAUD_RATE;

	if (div > 0xffff)
		return KEYSPAN_INVALID_BAUD_RATE;

	/* return the counter values if non-null */
	if (rate_low)
		*rate_low = (u8) (div & 0xff);

	if (rate_hi)
		*rate_hi = (u8) ((div >> 8) & 0xff);

	if (rate_low && rate_hi)
		dbg("%s - %d %02x %02x.",
			__func__, baud_rate, *rate_hi, *rate_low);

	return KEYSPAN_BAUD_RATE_OK;
}

static int keyspan_usa19w_calc_baud(u32 baud_rate, u32 baudclk, u8 *rate_hi,
				    u8 *rate_low, u8 *prescaler, int portnum)
{
	u32 	b16,	/* baud rate times 16 (actual rate used internally) */
		clk,	/* clock with 13/8 prescaler */
		div,	/* divisor using 13/8 prescaler */
		res,	/* resulting baud rate using 13/8 prescaler */
		diff,	/* error using 13/8 prescaler */
		smallest_diff;
	u8	best_prescaler;
	int	i;

	dbg("%s - %d.", __func__, baud_rate);

	/* prevent divide by zero */
	b16 = baud_rate * 16L;
	if (b16 == 0)
		return KEYSPAN_INVALID_BAUD_RATE;

	/* Calculate prescaler by trying them all and looking
	   for best fit */

	/* start with largest possible difference */
	smallest_diff = 0xffffffff;

		/* 0 is an invalid prescaler, used as a flag */
	best_prescaler = 0;

	for (i = 8; i <= 0xff; ++i) {
		clk = (baudclk * 8) / (u32) i;

		div = clk / b16;
		if (div == 0)
			continue;

		res = clk / div;
		diff = (res > b16) ? (res-b16) : (b16-res);

		if (diff < smallest_diff) {
			best_prescaler = i;
			smallest_diff = diff;
		}
	}

	if (best_prescaler == 0)
		return KEYSPAN_INVALID_BAUD_RATE;

	clk = (baudclk * 8) / (u32) best_prescaler;
	div = clk / b16;

	/* return the divisor and prescaler if non-null */
	if (rate_low)
		*rate_low = (u8) (div & 0xff);
	if (rate_hi)
		*rate_hi = (u8) ((div >> 8) & 0xff);
	if (prescaler) {
		*prescaler = best_prescaler;
		/*  dbg("%s - %d %d", __func__, *prescaler, div); */
	}
	return KEYSPAN_BAUD_RATE_OK;
}

	/* USA-28 supports different maximum baud rates on each port */
static int keyspan_usa28_calc_baud(u32 baud_rate, u32 baudclk, u8 *rate_hi,
				    u8 *rate_low, u8 *prescaler, int portnum)
{
	u32 	b16,	/* baud rate times 16 (actual rate used internally) */
		div,	/* divisor */
		cnt;	/* inverse of divisor (programmed into 8051) */

	dbg("%s - %d.", __func__, baud_rate);

		/* prevent divide by zero */
	b16 = baud_rate * 16L;
	if (b16 == 0)
		return KEYSPAN_INVALID_BAUD_RATE;

	/* calculate the divisor and the counter (its inverse) */
	div = KEYSPAN_USA28_BAUDCLK / b16;
	if (div == 0)
		return KEYSPAN_INVALID_BAUD_RATE;
	else
		cnt = 0 - div;

	/* check for out of range, based on portnum,
	   and return result */
	if (portnum == 0) {
		if (div > 0xffff)
			return KEYSPAN_INVALID_BAUD_RATE;
	} else {
		if (portnum == 1) {
			if (div > 0xff)
				return KEYSPAN_INVALID_BAUD_RATE;
		} else
			return KEYSPAN_INVALID_BAUD_RATE;
	}

		/* return the counter values if not NULL
		   (port 1 will ignore retHi) */
	if (rate_low)
		*rate_low = (u8) (cnt & 0xff);
	if (rate_hi)
		*rate_hi = (u8) ((cnt >> 8) & 0xff);
	dbg("%s - %d OK.", __func__, baud_rate);
	return KEYSPAN_BAUD_RATE_OK;
}

static int keyspan_usa26_send_setup(struct usb_serial *serial,
				    struct usb_serial_port *port,
				    int reset_port)
{
	struct keyspan_usa26_portControlMessage	msg;
	struct keyspan_serial_private 		*s_priv;
	struct keyspan_port_private 		*p_priv;
	const struct keyspan_device_details	*d_details;
	int 					outcont_urb;
	struct urb				*this_urb;
	int 					device_port, err;

	dbg("%s reset=%d", __func__, reset_port);

	s_priv = usb_get_serial_data(serial);
	p_priv = usb_get_serial_port_data(port);
	d_details = s_priv->device_details;
	device_port = port->number - port->serial->minor;

	outcont_urb = d_details->outcont_endpoints[port->number];
	this_urb = p_priv->outcont_urb;

	dbg("%s - endpoint %d", __func__, usb_pipeendpoint(this_urb->pipe));

		/* Make sure we have an urb then send the message */
	if (this_urb == NULL) {
		dbg("%s - oops no urb.", __func__);
		return -1;
	}

	/* Save reset port val for resend.
	   Don't overwrite resend for open/close condition. */
	if ((reset_port + 1) > p_priv->resend_cont)
		p_priv->resend_cont = reset_port + 1;
	if (this_urb->status == -EINPROGRESS) {
		/*  dbg("%s - already writing", __func__); */
		mdelay(5);
		return -1;
	}

	memset(&msg, 0, sizeof(struct keyspan_usa26_portControlMessage));

	/* Only set baud rate if it's changed */
	if (p_priv->old_baud != p_priv->baud) {
		p_priv->old_baud = p_priv->baud;
		msg.setClocking = 0xff;
		if (d_details->calculate_baud_rate
		    (p_priv->baud, d_details->baudclk, &msg.baudHi,
		     &msg.baudLo, &msg.prescaler, device_port) == KEYSPAN_INVALID_BAUD_RATE) {
			dbg("%s - Invalid baud rate %d requested, using 9600.",
						__func__, p_priv->baud);
			msg.baudLo = 0;
			msg.baudHi = 125;	/* Values for 9600 baud */
			msg.prescaler = 10;
		}
		msg.setPrescaler = 0xff;
	}

	msg.lcr = (p_priv->cflag & CSTOPB)? STOPBITS_678_2: STOPBITS_5678_1;
	switch (p_priv->cflag & CSIZE) {
	case CS5:
		msg.lcr |= USA_DATABITS_5;
		break;
	case CS6:
		msg.lcr |= USA_DATABITS_6;
		break;
	case CS7:
		msg.lcr |= USA_DATABITS_7;
		break;
	case CS8:
		msg.lcr |= USA_DATABITS_8;
		break;
	}
	if (p_priv->cflag & PARENB) {
		/* note USA_PARITY_NONE == 0 */
		msg.lcr |= (p_priv->cflag & PARODD)?
			USA_PARITY_ODD : USA_PARITY_EVEN;
	}
	msg.setLcr = 0xff;

	msg.ctsFlowControl = (p_priv->flow_control == flow_cts);
	msg.xonFlowControl = 0;
	msg.setFlowControl = 0xff;
	msg.forwardingLength = 16;
	msg.xonChar = 17;
	msg.xoffChar = 19;

	/* Opening port */
	if (reset_port == 1) {
		msg._txOn = 1;
		msg._txOff = 0;
		msg.txFlush = 0;
		msg.txBreak = 0;
		msg.rxOn = 1;
		msg.rxOff = 0;
		msg.rxFlush = 1;
		msg.rxForward = 0;
		msg.returnStatus = 0;
		msg.resetDataToggle = 0xff;
	}

	/* Closing port */
	else if (reset_port == 2) {
		msg._txOn = 0;
		msg._txOff = 1;
		msg.txFlush = 0;
		msg.txBreak = 0;
		msg.rxOn = 0;
		msg.rxOff = 1;
		msg.rxFlush = 1;
		msg.rxForward = 0;
		msg.returnStatus = 0;
		msg.resetDataToggle = 0;
	}

	/* Sending intermediate configs */
	else {
		msg._txOn = (!p_priv->break_on);
		msg._txOff = 0;
		msg.txFlush = 0;
		msg.txBreak = (p_priv->break_on);
		msg.rxOn = 0;
		msg.rxOff = 0;
		msg.rxFlush = 0;
		msg.rxForward = 0;
		msg.returnStatus = 0;
		msg.resetDataToggle = 0x0;
	}

	/* Do handshaking outputs */
	msg.setTxTriState_setRts = 0xff;
	msg.txTriState_rts = p_priv->rts_state;

	msg.setHskoa_setDtr = 0xff;
	msg.hskoa_dtr = p_priv->dtr_state;

	p_priv->resend_cont = 0;
	memcpy(this_urb->transfer_buffer, &msg, sizeof(msg));

	/* send the data out the device on control endpoint */
	this_urb->transfer_buffer_length = sizeof(msg);

	this_urb->dev = serial->dev;
	err = usb_submit_urb(this_urb, GFP_ATOMIC);
	if (err != 0)
		dbg("%s - usb_submit_urb(setup) failed (%d)", __func__, err);
#if 0
	else {
		dbg("%s - usb_submit_urb(%d) OK %d bytes (end %d)", __func__
		    outcont_urb, this_urb->transfer_buffer_length,
		    usb_pipeendpoint(this_urb->pipe));
	}
#endif

	return 0;
}

static int keyspan_usa28_send_setup(struct usb_serial *serial,
				    struct usb_serial_port *port,
				    int reset_port)
{
	struct keyspan_usa28_portControlMessage	msg;
	struct keyspan_serial_private	 	*s_priv;
	struct keyspan_port_private 		*p_priv;
	const struct keyspan_device_details	*d_details;
	struct urb				*this_urb;
	int 					device_port, err;

	dbg("%s", __func__);

	s_priv = usb_get_serial_data(serial);
	p_priv = usb_get_serial_port_data(port);
	d_details = s_priv->device_details;
	device_port = port->number - port->serial->minor;

	/* only do something if we have a bulk out endpoint */
	this_urb = p_priv->outcont_urb;
	if (this_urb == NULL) {
		dbg("%s - oops no urb.", __func__);
		return -1;
	}

	/* Save reset port val for resend.
	   Don't overwrite resend for open/close condition. */
	if ((reset_port + 1) > p_priv->resend_cont)
		p_priv->resend_cont = reset_port + 1;
	if (this_urb->status == -EINPROGRESS) {
		dbg("%s already writing", __func__);
		mdelay(5);
		return -1;
	}

	memset(&msg, 0, sizeof(struct keyspan_usa28_portControlMessage));

	msg.setBaudRate = 1;
	if (d_details->calculate_baud_rate(p_priv->baud, d_details->baudclk,
		&msg.baudHi, &msg.baudLo, NULL, device_port) == KEYSPAN_INVALID_BAUD_RATE) {
		dbg("%s - Invalid baud rate requested %d.",
						__func__, p_priv->baud);
		msg.baudLo = 0xff;
		msg.baudHi = 0xb2;	/* Values for 9600 baud */
	}

	/* If parity is enabled, we must calculate it ourselves. */
	msg.parity = 0;		/* XXX for now */

	msg.ctsFlowControl = (p_priv->flow_control == flow_cts);
	msg.xonFlowControl = 0;

	/* Do handshaking outputs, DTR is inverted relative to RTS */
	msg.rts = p_priv->rts_state;
	msg.dtr = p_priv->dtr_state;

	msg.forwardingLength = 16;
	msg.forwardMs = 10;
	msg.breakThreshold = 45;
	msg.xonChar = 17;
	msg.xoffChar = 19;

	/*msg.returnStatus = 1;
	msg.resetDataToggle = 0xff;*/
	/* Opening port */
	if (reset_port == 1) {
		msg._txOn = 1;
		msg._txOff = 0;
		msg.txFlush = 0;
		msg.txForceXoff = 0;
		msg.txBreak = 0;
		msg.rxOn = 1;
		msg.rxOff = 0;
		msg.rxFlush = 1;
		msg.rxForward = 0;
		msg.returnStatus = 0;
		msg.resetDataToggle = 0xff;
	}
	/* Closing port */
	else if (reset_port == 2) {
		msg._txOn = 0;
		msg._txOff = 1;
		msg.txFlush = 0;
		msg.txForceXoff = 0;
		msg.txBreak = 0;
		msg.rxOn = 0;
		msg.rxOff = 1;
		msg.rxFlush = 1;
		msg.rxForward = 0;
		msg.returnStatus = 0;
		msg.resetDataToggle = 0;
	}
	/* Sending intermediate configs */
	else {
		msg._txOn = (!p_priv->break_on);
		msg._txOff = 0;
		msg.txFlush = 0;
		msg.txForceXoff = 0;
		msg.txBreak = (p_priv->break_on);
		msg.rxOn = 0;
		msg.rxOff = 0;
		msg.rxFlush = 0;
		msg.rxForward = 0;
		msg.returnStatus = 0;
		msg.resetDataToggle = 0x0;
	}

	p_priv->resend_cont = 0;
	memcpy(this_urb->transfer_buffer, &msg, sizeof(msg));

	/* send the data out the device on control endpoint */
	this_urb->transfer_buffer_length = sizeof(msg);

	this_urb->dev = serial->dev;
	err = usb_submit_urb(this_urb, GFP_ATOMIC);
	if (err != 0)
		dbg("%s - usb_submit_urb(setup) failed", __func__);
#if 0
	else {
		dbg("%s - usb_submit_urb(setup) OK %d bytes", __func__,
		    this_urb->transfer_buffer_length);
	}
#endif

	return 0;
}

static int keyspan_usa49_send_setup(struct usb_serial *serial,
				    struct usb_serial_port *port,
				    int reset_port)
{
	struct keyspan_usa49_portControlMessage	msg;
	struct usb_ctrlrequest 			*dr = NULL;
	struct keyspan_serial_private 		*s_priv;
	struct keyspan_port_private 		*p_priv;
	const struct keyspan_device_details	*d_details;
	struct urb				*this_urb;
	int 					err, device_port;

	dbg("%s", __func__);

	s_priv = usb_get_serial_data(serial);
	p_priv = usb_get_serial_port_data(port);
	d_details = s_priv->device_details;

	this_urb = s_priv->glocont_urb;

	/* Work out which port within the device is being setup */
	device_port = port->number - port->serial->minor;

	dbg("%s - endpoint %d port %d (%d)",
			__func__, usb_pipeendpoint(this_urb->pipe),
			port->number, device_port);

		/* Make sure we have an urb then send the message */
	if (this_urb == NULL) {
		dbg("%s - oops no urb for port %d.", __func__, port->number);
		return -1;
	}

	/* Save reset port val for resend.
	   Don't overwrite resend for open/close condition. */
	if ((reset_port + 1) > p_priv->resend_cont)
		p_priv->resend_cont = reset_port + 1;

	if (this_urb->status == -EINPROGRESS) {
		/*  dbg("%s - already writing", __func__); */
		mdelay(5);
		return -1;
	}

	memset(&msg, 0, sizeof(struct keyspan_usa49_portControlMessage));

	/*msg.portNumber = port->number;*/
	msg.portNumber = device_port;

	/* Only set baud rate if it's changed */
	if (p_priv->old_baud != p_priv->baud) {
		p_priv->old_baud = p_priv->baud;
		msg.setClocking = 0xff;
		if (d_details->calculate_baud_rate
		    (p_priv->baud, d_details->baudclk, &msg.baudHi,
		     &msg.baudLo, &msg.prescaler, device_port) == KEYSPAN_INVALID_BAUD_RATE) {
			dbg("%s - Invalid baud rate %d requested, using 9600.",
						__func__, p_priv->baud);
			msg.baudLo = 0;
			msg.baudHi = 125;	/* Values for 9600 baud */
			msg.prescaler = 10;
		}
		/* msg.setPrescaler = 0xff; */
	}

	msg.lcr = (p_priv->cflag & CSTOPB)? STOPBITS_678_2: STOPBITS_5678_1;
	switch (p_priv->cflag & CSIZE) {
	case CS5:
		msg.lcr |= USA_DATABITS_5;
		break;
	case CS6:
		msg.lcr |= USA_DATABITS_6;
		break;
	case CS7:
		msg.lcr |= USA_DATABITS_7;
		break;
	case CS8:
		msg.lcr |= USA_DATABITS_8;
		break;
	}
	if (p_priv->cflag & PARENB) {
		/* note USA_PARITY_NONE == 0 */
		msg.lcr |= (p_priv->cflag & PARODD)?
			USA_PARITY_ODD : USA_PARITY_EVEN;
	}
	msg.setLcr = 0xff;

	msg.ctsFlowControl = (p_priv->flow_control == flow_cts);
	msg.xonFlowControl = 0;
	msg.setFlowControl = 0xff;

	msg.forwardingLength = 16;
	msg.xonChar = 17;
	msg.xoffChar = 19;

	/* Opening port */
	if (reset_port == 1) {
		msg._txOn = 1;
		msg._txOff = 0;
		msg.txFlush = 0;
		msg.txBreak = 0;
		msg.rxOn = 1;
		msg.rxOff = 0;
		msg.rxFlush = 1;
		msg.rxForward = 0;
		msg.returnStatus = 0;
		msg.resetDataToggle = 0xff;
		msg.enablePort = 1;
		msg.disablePort = 0;
	}
	/* Closing port */
	else if (reset_port == 2) {
		msg._txOn = 0;
		msg._txOff = 1;
		msg.txFlush = 0;
		msg.txBreak = 0;
		msg.rxOn = 0;
		msg.rxOff = 1;
		msg.rxFlush = 1;
		msg.rxForward = 0;
		msg.returnStatus = 0;
		msg.resetDataToggle = 0;
		msg.enablePort = 0;
		msg.disablePort = 1;
	}
	/* Sending intermediate configs */
	else {
		msg._txOn = (!p_priv->break_on);
		msg._txOff = 0;
		msg.txFlush = 0;
		msg.txBreak = (p_priv->break_on);
		msg.rxOn = 0;
		msg.rxOff = 0;
		msg.rxFlush = 0;
		msg.rxForward = 0;
		msg.returnStatus = 0;
		msg.resetDataToggle = 0x0;
		msg.enablePort = 0;
		msg.disablePort = 0;
	}

	/* Do handshaking outputs */
	msg.setRts = 0xff;
	msg.rts = p_priv->rts_state;

	msg.setDtr = 0xff;
	msg.dtr = p_priv->dtr_state;

	p_priv->resend_cont = 0;

	/* if the device is a 49wg, we send control message on usb
	   control EP 0 */

	if (d_details->product_id == keyspan_usa49wg_product_id) {
		dr = (void *)(s_priv->ctrl_buf);
		dr->bRequestType = USB_TYPE_VENDOR | USB_DIR_OUT;
		dr->bRequest = 0xB0;	/* 49wg control message */;
		dr->wValue = 0;
		dr->wIndex = 0;
		dr->wLength = cpu_to_le16(sizeof(msg));

		memcpy(s_priv->glocont_buf, &msg, sizeof(msg));

		usb_fill_control_urb(this_urb, serial->dev,
				usb_sndctrlpipe(serial->dev, 0),
				(unsigned char *)dr, s_priv->glocont_buf,
				sizeof(msg), usa49_glocont_callback, serial);

	} else {
		memcpy(this_urb->transfer_buffer, &msg, sizeof(msg));

		/* send the data out the device on control endpoint */
		this_urb->transfer_buffer_length = sizeof(msg);

		this_urb->dev = serial->dev;
	}
	err = usb_submit_urb(this_urb, GFP_ATOMIC);
	if (err != 0)
		dbg("%s - usb_submit_urb(setup) failed (%d)", __func__, err);
#if 0
	else {
		dbg("%s - usb_submit_urb(%d) OK %d bytes (end %d)", __func__,
			   outcont_urb, this_urb->transfer_buffer_length,
			   usb_pipeendpoint(this_urb->pipe));
	}
#endif

	return 0;
}

static int keyspan_usa90_send_setup(struct usb_serial *serial,
				    struct usb_serial_port *port,
				    int reset_port)
{
	struct keyspan_usa90_portControlMessage	msg;
	struct keyspan_serial_private 		*s_priv;
	struct keyspan_port_private 		*p_priv;
	const struct keyspan_device_details	*d_details;
	struct urb				*this_urb;
	int 					err;
	u8						prescaler;

	dbg("%s", __func__);

	s_priv = usb_get_serial_data(serial);
	p_priv = usb_get_serial_port_data(port);
	d_details = s_priv->device_details;

	/* only do something if we have a bulk out endpoint */
	this_urb = p_priv->outcont_urb;
	if (this_urb == NULL) {
		dbg("%s - oops no urb.", __func__);
		return -1;
	}

	/* Save reset port val for resend.
	   Don't overwrite resend for open/close condition. */
	if ((reset_port + 1) > p_priv->resend_cont)
		p_priv->resend_cont = reset_port + 1;
	if (this_urb->status == -EINPROGRESS) {
		dbg("%s already writing", __func__);
		mdelay(5);
		return -1;
	}

	memset(&msg, 0, sizeof(struct keyspan_usa90_portControlMessage));

	/* Only set baud rate if it's changed */
	if (p_priv->old_baud != p_priv->baud) {
		p_priv->old_baud = p_priv->baud;
		msg.setClocking = 0x01;
		if (d_details->calculate_baud_rate
		    (p_priv->baud, d_details->baudclk, &msg.baudHi,
		     &msg.baudLo, &prescaler, 0) == KEYSPAN_INVALID_BAUD_RATE) {
			dbg("%s - Invalid baud rate %d requested, using 9600.",
						__func__, p_priv->baud);
			p_priv->baud = 9600;
			d_details->calculate_baud_rate(p_priv->baud, d_details->baudclk,
				&msg.baudHi, &msg.baudLo, &prescaler, 0);
		}
		msg.setRxMode = 1;
		msg.setTxMode = 1;
	}

	/* modes must always be correctly specified */
	if (p_priv->baud > 57600) {
		msg.rxMode = RXMODE_DMA;
		msg.txMode = TXMODE_DMA;
	} else {
		msg.rxMode = RXMODE_BYHAND;
		msg.txMode = TXMODE_BYHAND;
	}

	msg.lcr = (p_priv->cflag & CSTOPB)? STOPBITS_678_2: STOPBITS_5678_1;
	switch (p_priv->cflag & CSIZE) {
	case CS5:
		msg.lcr |= USA_DATABITS_5;
		break;
	case CS6:
		msg.lcr |= USA_DATABITS_6;
		break;
	case CS7:
		msg.lcr |= USA_DATABITS_7;
		break;
	case CS8:
		msg.lcr |= USA_DATABITS_8;
		break;
	}
	if (p_priv->cflag & PARENB) {
		/* note USA_PARITY_NONE == 0 */
		msg.lcr |= (p_priv->cflag & PARODD)?
			USA_PARITY_ODD : USA_PARITY_EVEN;
	}
	if (p_priv->old_cflag != p_priv->cflag) {
		p_priv->old_cflag = p_priv->cflag;
		msg.setLcr = 0x01;
	}

	if (p_priv->flow_control == flow_cts)
		msg.txFlowControl = TXFLOW_CTS;
	msg.setTxFlowControl = 0x01;
	msg.setRxFlowControl = 0x01;

	msg.rxForwardingLength = 16;
	msg.rxForwardingTimeout = 16;
	msg.txAckSetting = 0;
	msg.xonChar = 17;
	msg.xoffChar = 19;

	/* Opening port */
	if (reset_port == 1) {
		msg.portEnabled = 1;
		msg.rxFlush = 1;
		msg.txBreak = (p_priv->break_on);
	}
	/* Closing port */
	else if (reset_port == 2)
		msg.portEnabled = 0;
	/* Sending intermediate configs */
	else {
		if (port->port.count)
			msg.portEnabled = 1;
		msg.txBreak = (p_priv->break_on);
	}

	/* Do handshaking outputs */
	msg.setRts = 0x01;
	msg.rts = p_priv->rts_state;

	msg.setDtr = 0x01;
	msg.dtr = p_priv->dtr_state;

	p_priv->resend_cont = 0;
	memcpy(this_urb->transfer_buffer, &msg, sizeof(msg));

	/* send the data out the device on control endpoint */
	this_urb->transfer_buffer_length = sizeof(msg);

	this_urb->dev = serial->dev;
	err = usb_submit_urb(this_urb, GFP_ATOMIC);
	if (err != 0)
		dbg("%s - usb_submit_urb(setup) failed (%d)", __func__, err);
	return 0;
}

static int keyspan_usa67_send_setup(struct usb_serial *serial,
				    struct usb_serial_port *port,
				    int reset_port)
{
	struct keyspan_usa67_portControlMessage	msg;
	struct keyspan_serial_private 		*s_priv;
	struct keyspan_port_private 		*p_priv;
	const struct keyspan_device_details	*d_details;
	struct urb				*this_urb;
	int 					err, device_port;

	dbg("%s", __func__);

	s_priv = usb_get_serial_data(serial);
	p_priv = usb_get_serial_port_data(port);
	d_details = s_priv->device_details;

	this_urb = s_priv->glocont_urb;

	/* Work out which port within the device is being setup */
	device_port = port->number - port->serial->minor;

	/* Make sure we have an urb then send the message */
	if (this_urb == NULL) {
		dbg("%s - oops no urb for port %d.", __func__,
			port->number);
		return -1;
	}

	/* Save reset port val for resend.
	   Don't overwrite resend for open/close condition. */
	if ((reset_port + 1) > p_priv->resend_cont)
		p_priv->resend_cont = reset_port + 1;
	if (this_urb->status == -EINPROGRESS) {
		/*  dbg("%s - already writing", __func__); */
		mdelay(5);
		return -1;
	}

	memset(&msg, 0, sizeof(struct keyspan_usa67_portControlMessage));

	msg.port = device_port;

	/* Only set baud rate if it's changed */
	if (p_priv->old_baud != p_priv->baud) {
		p_priv->old_baud = p_priv->baud;
		msg.setClocking = 0xff;
		if (d_details->calculate_baud_rate
		    (p_priv->baud, d_details->baudclk, &msg.baudHi,
		     &msg.baudLo, &msg.prescaler, device_port) == KEYSPAN_INVALID_BAUD_RATE) {
			dbg("%s - Invalid baud rate %d requested, using 9600.",
						__func__, p_priv->baud);
			msg.baudLo = 0;
			msg.baudHi = 125;	/* Values for 9600 baud */
			msg.prescaler = 10;
		}
		msg.setPrescaler = 0xff;
	}

	msg.lcr = (p_priv->cflag & CSTOPB) ? STOPBITS_678_2 : STOPBITS_5678_1;
	switch (p_priv->cflag & CSIZE) {
	case CS5:
		msg.lcr |= USA_DATABITS_5;
		break;
	case CS6:
		msg.lcr |= USA_DATABITS_6;
		break;
	case CS7:
		msg.lcr |= USA_DATABITS_7;
		break;
	case CS8:
		msg.lcr |= USA_DATABITS_8;
		break;
	}
	if (p_priv->cflag & PARENB) {
		/* note USA_PARITY_NONE == 0 */
		msg.lcr |= (p_priv->cflag & PARODD)?
					USA_PARITY_ODD : USA_PARITY_EVEN;
	}
	msg.setLcr = 0xff;

	msg.ctsFlowControl = (p_priv->flow_control == flow_cts);
	msg.xonFlowControl = 0;
	msg.setFlowControl = 0xff;
	msg.forwardingLength = 16;
	msg.xonChar = 17;
	msg.xoffChar = 19;

	if (reset_port == 1) {
		/* Opening port */
		msg._txOn = 1;
		msg._txOff = 0;
		msg.txFlush = 0;
		msg.txBreak = 0;
		msg.rxOn = 1;
		msg.rxOff = 0;
		msg.rxFlush = 1;
		msg.rxForward = 0;
		msg.returnStatus = 0;
		msg.resetDataToggle = 0xff;
	} else if (reset_port == 2) {
		/* Closing port */
		msg._txOn = 0;
		msg._txOff = 1;
		msg.txFlush = 0;
		msg.txBreak = 0;
		msg.rxOn = 0;
		msg.rxOff = 1;
		msg.rxFlush = 1;
		msg.rxForward = 0;
		msg.returnStatus = 0;
		msg.resetDataToggle = 0;
	} else {
		/* Sending intermediate configs */
		msg._txOn = (!p_priv->break_on);
		msg._txOff = 0;
		msg.txFlush = 0;
		msg.txBreak = (p_priv->break_on);
		msg.rxOn = 0;
		msg.rxOff = 0;
		msg.rxFlush = 0;
		msg.rxForward = 0;
		msg.returnStatus = 0;
		msg.resetDataToggle = 0x0;
	}

	/* Do handshaking outputs */
	msg.setTxTriState_setRts = 0xff;
	msg.txTriState_rts = p_priv->rts_state;

	msg.setHskoa_setDtr = 0xff;
	msg.hskoa_dtr = p_priv->dtr_state;

	p_priv->resend_cont = 0;

	memcpy(this_urb->transfer_buffer, &msg, sizeof(msg));

	/* send the data out the device on control endpoint */
	this_urb->transfer_buffer_length = sizeof(msg);
	this_urb->dev = serial->dev;

	err = usb_submit_urb(this_urb, GFP_ATOMIC);
	if (err != 0)
		dbg("%s - usb_submit_urb(setup) failed (%d)", __func__,
				err);
	return 0;
}

static void keyspan_send_setup(struct usb_serial_port *port, int reset_port)
{
	struct usb_serial *serial = port->serial;
	struct keyspan_serial_private *s_priv;
	const struct keyspan_device_details *d_details;

	dbg("%s", __func__);

	s_priv = usb_get_serial_data(serial);
	d_details = s_priv->device_details;

	switch (d_details->msg_format) {
	case msg_usa26:
		keyspan_usa26_send_setup(serial, port, reset_port);
		break;
	case msg_usa28:
		keyspan_usa28_send_setup(serial, port, reset_port);
		break;
	case msg_usa49:
		keyspan_usa49_send_setup(serial, port, reset_port);
		break;
	case msg_usa90:
		keyspan_usa90_send_setup(serial, port, reset_port);
		break;
	case msg_usa67:
		keyspan_usa67_send_setup(serial, port, reset_port);
		break;
	}
}


/* Gets called by the "real" driver (ie once firmware is loaded
   and renumeration has taken place. */
static int keyspan_startup(struct usb_serial *serial)
{
	int				i, err;
	struct usb_serial_port		*port;
	struct keyspan_serial_private 	*s_priv;
	struct keyspan_port_private	*p_priv;
	const struct keyspan_device_details	*d_details;

	dbg("%s", __func__);

	for (i = 0; (d_details = keyspan_devices[i]) != NULL; ++i)
		if (d_details->product_id ==
				le16_to_cpu(serial->dev->descriptor.idProduct))
			break;
	if (d_details == NULL) {
		dev_err(&serial->dev->dev, "%s - unknown product id %x\n",
		    __func__, le16_to_cpu(serial->dev->descriptor.idProduct));
		return 1;
	}

	/* Setup private data for serial driver */
	s_priv = kzalloc(sizeof(struct keyspan_serial_private), GFP_KERNEL);
	if (!s_priv) {
		dbg("%s - kmalloc for keyspan_serial_private failed.",
								__func__);
		return -ENOMEM;
	}

	s_priv->device_details = d_details;
	usb_set_serial_data(serial, s_priv);

	/* Now setup per port private data */
	for (i = 0; i < serial->num_ports; i++) {
		port = serial->port[i];
		p_priv = kzalloc(sizeof(struct keyspan_port_private),
								GFP_KERNEL);
		if (!p_priv) {
			dbg("%s - kmalloc for keyspan_port_private (%d) failed!.", __func__, i);
			return 1;
		}
		p_priv->device_details = d_details;
		usb_set_serial_port_data(port, p_priv);
	}

	keyspan_setup_urbs(serial);

	if (s_priv->instat_urb != NULL) {
		s_priv->instat_urb->dev = serial->dev;
		err = usb_submit_urb(s_priv->instat_urb, GFP_KERNEL);
		if (err != 0)
			dbg("%s - submit instat urb failed %d", __func__,
				err);
	}
	if (s_priv->indat_urb != NULL) {
		s_priv->indat_urb->dev = serial->dev;
		err = usb_submit_urb(s_priv->indat_urb, GFP_KERNEL);
		if (err != 0)
			dbg("%s - submit indat urb failed %d", __func__,
				err);
	}

	return 0;
}

static void keyspan_disconnect(struct usb_serial *serial)
{
	int				i, j;
	struct usb_serial_port		*port;
	struct keyspan_serial_private 	*s_priv;
	struct keyspan_port_private	*p_priv;

	dbg("%s", __func__);

	s_priv = usb_get_serial_data(serial);

	/* Stop reading/writing urbs */
	stop_urb(s_priv->instat_urb);
	stop_urb(s_priv->glocont_urb);
	stop_urb(s_priv->indat_urb);
	for (i = 0; i < serial->num_ports; ++i) {
		port = serial->port[i];
		p_priv = usb_get_serial_port_data(port);
		stop_urb(p_priv->inack_urb);
		stop_urb(p_priv->outcont_urb);
		for (j = 0; j < 2; j++) {
			stop_urb(p_priv->in_urbs[j]);
			stop_urb(p_priv->out_urbs[j]);
		}
	}

	/* Now free them */
	usb_free_urb(s_priv->instat_urb);
	usb_free_urb(s_priv->indat_urb);
	usb_free_urb(s_priv->glocont_urb);
	for (i = 0; i < serial->num_ports; ++i) {
		port = serial->port[i];
		p_priv = usb_get_serial_port_data(port);
		usb_free_urb(p_priv->inack_urb);
		usb_free_urb(p_priv->outcont_urb);
		for (j = 0; j < 2; j++) {
			usb_free_urb(p_priv->in_urbs[j]);
			usb_free_urb(p_priv->out_urbs[j]);
		}
	}
}

static void keyspan_release(struct usb_serial *serial)
{
	int				i;
	struct usb_serial_port		*port;
	struct keyspan_serial_private 	*s_priv;

	dbg("%s", __func__);

	s_priv = usb_get_serial_data(serial);

	/*  dbg("Freeing serial->private."); */
	kfree(s_priv);

	/*  dbg("Freeing port->private."); */
	/* Now free per port private data */
	for (i = 0; i < serial->num_ports; i++) {
		port = serial->port[i];
		kfree(usb_get_serial_port_data(port));
	}
}

MODULE_AUTHOR(DRIVER_AUTHOR);
MODULE_DESCRIPTION(DRIVER_DESC);
MODULE_LICENSE("GPL");

MODULE_FIRMWARE("keyspan/usa28.fw");
MODULE_FIRMWARE("keyspan/usa28x.fw");
MODULE_FIRMWARE("keyspan/usa28xa.fw");
MODULE_FIRMWARE("keyspan/usa28xb.fw");
MODULE_FIRMWARE("keyspan/usa19.fw");
MODULE_FIRMWARE("keyspan/usa19qi.fw");
MODULE_FIRMWARE("keyspan/mpr.fw");
MODULE_FIRMWARE("keyspan/usa19qw.fw");
MODULE_FIRMWARE("keyspan/usa18x.fw");
MODULE_FIRMWARE("keyspan/usa19w.fw");
MODULE_FIRMWARE("keyspan/usa49w.fw");
MODULE_FIRMWARE("keyspan/usa49wlc.fw");

module_param(debug, bool, S_IRUGO | S_IWUSR);
MODULE_PARM_DESC(debug, "Debug enabled or not");