Gitiles
Code Review Sign In
gerrit-public.fairphone.software / kernel / msm-4.19 / b4410a891af503b93d4c0186d47ca62ece25db8b / . / drivers / mfd / Kconfig
blob: a4fd1738191a70d16c11ef3319b1e9baf6737c3d [file] [log] [blame]
Russell Kinga4e137a2005-08-18 10:06:59 +0100[diff] [blame]1#
2# Multifunction miscellaneous devices
3#
4
Arnd Bergmann8a0a8e82011-09-02 16:43:36 +0200[diff] [blame]5if HAS_IOMEM
6menu "Multifunction device drivers"
Ben Dooksb6d64542007-02-20 13:58:01 -0800[diff] [blame]7
Dmitry Baryshkovaa613de2008-06-27 10:37:19 +0100[diff] [blame]8config MFD_CORE
9 tristate
10 default n
11
Haojian Zhuang2cc50be2010-01-06 17:07:13 -0500[diff] [blame]12config MFD_88PM860X
13 bool "Support Marvell 88PM8606/88PM8607"
Geert Uytterhoeven8d002bd2009-12-15 21:49:57 +0100[diff] [blame]14 depends on I2C=y && GENERIC_HARDIRQS
Jett.Zhoub46a36c2011-11-11 15:38:27 +0800[diff] [blame]15 select REGMAP_I2C
Haojian Zhuang2cc50be2010-01-06 17:07:13 -0500[diff] [blame]16 select MFD_CORE
17 help
18 This supports for Marvell 88PM8606/88PM8607 Power Management IC.
19 This includes the I2C driver and the core APIs _only_, you have to
20 select individual components like voltage regulators, RTC and
21 battery-charger under the corresponding menus.
22
Ben Dooksb6d64542007-02-20 13:58:01 -0800[diff] [blame]23config MFD_SM501
24 tristate "Support for Silicon Motion SM501"
25 ---help---
26 This is the core driver for the Silicon Motion SM501 multimedia
27 companion chip. This device is a multifunction device which may
Matt LaPlante01dd2fb2007-10-20 01:34:40 +0200[diff] [blame]28 provide numerous interfaces including USB host controller, USB gadget,
29 asynchronous serial ports, audio functions, and a dual display video
Ben Dooksb6d64542007-02-20 13:58:01 -0800[diff] [blame]30 interface. The device may be connected by PCI or local bus with
31 varying functions enabled.
32
Ben Dooksf61be272008-07-25 01:45:59 -0700[diff] [blame]33config MFD_SM501_GPIO
34 bool "Export GPIO via GPIO layer"
Samuel Ortiz2eedd602008-09-25 00:39:05 +0200[diff] [blame]35 depends on MFD_SM501 && GPIOLIB
Ben Dooksf61be272008-07-25 01:45:59 -0700[diff] [blame]36 ---help---
37 This option uses the gpio library layer to export the 64 GPIO
38 lines on the SM501. The platform data is used to supply the
39 base number for the first GPIO line to register.
40
Samuel Ortizfa9ff4b2008-02-07 00:14:49 -0800[diff] [blame]41config MFD_ASIC3
42 bool "Support for Compaq ASIC3"
Samuel Ortiz2eedd602008-09-25 00:39:05 +0200[diff] [blame]43 depends on GENERIC_HARDIRQS && GPIOLIB && ARM
Philipp Zabel9461f652009-06-15 12:10:24 +0200[diff] [blame]44 select MFD_CORE
Samuel Ortizfa9ff4b2008-02-07 00:14:49 -0800[diff] [blame]45 ---help---
46 This driver supports the ASIC3 multifunction chip found on many
47 PDAs (mainly iPAQ and HTC based ones)
48
Miguel Aguilarca263082010-03-11 09:32:21 -0600[diff] [blame]49config MFD_DAVINCI_VOICECODEC
50 tristate
51 select MFD_CORE
52
David Brownell0931a4c2008-12-22 12:05:27 +0100[diff] [blame]53config MFD_DM355EVM_MSP
54 bool "DaVinci DM355 EVM microcontroller"
Samuel Ortiz1819ebc2010-09-20 00:19:27 +0200[diff] [blame]55 depends on I2C=y && MACH_DAVINCI_DM355_EVM
David Brownell0931a4c2008-12-22 12:05:27 +0100[diff] [blame]56 help
57 This driver supports the MSP430 microcontroller used on these
58 boards. MSP430 firmware manages resets and power sequencing,
59 inputs from buttons and the IR remote, LEDs, an RTC, and more.
60
Cyril Chemparathy03df0f62011-01-18 19:21:35 +0000[diff] [blame]61config MFD_TI_SSP
62 tristate "TI Sequencer Serial Port support"
63 depends on ARCH_DAVINCI_TNETV107X
64 select MFD_CORE
65 ---help---
66 Say Y here if you want support for the Sequencer Serial Port
67 in a Texas Instruments TNETV107X SoC.
68
69 To compile this driver as a module, choose M here: the
70 module will be called ti-ssp.
71
Philipp Zabela1635b82008-04-09 19:20:34 +0100[diff] [blame]72config HTC_EGPIO
73 bool "HTC EGPIO support"
Michael Buesch7444a722008-07-25 01:46:11 -0700[diff] [blame]74 depends on GENERIC_HARDIRQS && GPIOLIB && ARM
Philipp Zabela1635b82008-04-09 19:20:34 +0100[diff] [blame]75 help
76 This driver supports the CPLD egpio chip present on
77 several HTC phones. It provides basic support for input
78 pins, output pins, and irqs.
79
Philipp Zabel5dc33392008-04-12 13:25:41 +0100[diff] [blame]80config HTC_PASIC3
81 tristate "HTC PASIC3 LED/DS1WM chip support"
Philipp Zabel0254a8f2009-02-17 10:06:45 +0100[diff] [blame]82 select MFD_CORE
Philipp Zabel5dc33392008-04-12 13:25:41 +0100[diff] [blame]83 help
84 This core driver provides register access for the LED/DS1WM
85 chips labeled "AIC2" and "AIC3", found on HTC Blueangel and
86 HTC Magician devices, respectively. Actual functionality is
87 handled by the leds-pasic3 and ds1wm drivers.
88
Cory Maccarrone6048a3d2010-01-19 11:22:45 +0100[diff] [blame]89config HTC_I2CPLD
90 bool "HTC I2C PLD chip support"
Randy Dunlapbef3e202010-01-20 19:55:34 -0800[diff] [blame]91 depends on I2C=y && GPIOLIB
Cory Maccarrone6048a3d2010-01-19 11:22:45 +0100[diff] [blame]92 help
93 If you say yes here you get support for the supposed CPLD
94 found on omap850 HTC devices like the HTC Wizard and HTC Herald.
95 This device provides input and output GPIOs through an I2C
96 interface to one or more sub-chips.
97
Marek Vašutd9105c22008-08-03 21:34:08 +0100[diff] [blame]98config UCB1400_CORE
99 tristate "Philips UCB1400 Core driver"
Randy Dunlape4831802008-10-15 13:29:07 +0200[diff] [blame]100 depends on AC97_BUS
Andrew Morton5a49a542008-10-15 13:30:47 +0200[diff] [blame]101 depends on GPIOLIB
Marek Vašutd9105c22008-08-03 21:34:08 +0100[diff] [blame]102 help
103 This enables support for the Philips UCB1400 core functions.
104 The UCB1400 is an AC97 audio codec.
105
106 To compile this driver as a module, choose M here: the
107 module will be called ucb1400_core.
108
Linus Walleij798a8ee2011-03-09 13:02:38 +0100[diff] [blame]109config TPS6105X
110 tristate "TPS61050/61052 Boost Converters"
111 depends on I2C
Linus Walleij2edd3b62011-03-09 12:02:55 +0000[diff] [blame]112 select REGULATOR
Guenter Roeckfc498fa2011-03-24 12:12:47 -0700[diff] [blame]113 select MFD_CORE
Linus Walleij2edd3b62011-03-09 12:02:55 +0000[diff] [blame]114 select REGULATOR_FIXED_VOLTAGE
Linus Walleij798a8ee2011-03-09 13:02:38 +0100[diff] [blame]115 help
116 This option enables a driver for the TP61050/TPS61052
117 high-power "white LED driver". This boost converter is
118 sometimes used for other things than white LEDs, and
119 also contains a GPIO pin.
120
David Brownell87c13492008-12-22 12:16:27 +0100[diff] [blame]121config TPS65010
122 tristate "TPS6501x Power Management chips"
123 depends on I2C && GPIOLIB
124 default y if MACH_OMAP_H2 || MACH_OMAP_H3 || MACH_OMAP_OSK
125 help
126 If you say yes here you get support for the TPS6501x series of
127 Power Management chips. These include voltage regulators,
128 lithium ion/polymer battery charging, and other features that
129 are often used in portable devices like cell phones and cameras.
130
131 This driver can also be built as a module. If so, the module
132 will be called tps65010.
133
Todd Fischer31dd6a22010-04-08 09:04:55 +0200[diff] [blame]134config TPS6507X
135 tristate "TPS6507x Power Management / Touch Screen chips"
136 select MFD_CORE
137 depends on I2C
138 help
139 If you say yes here you get support for the TPS6507x series of
140 Power Management / Touch Screen chips. These include voltage
141 regulators, lithium ion/polymer battery charging, touch screen
142 and other features that are often used in portable devices.
143 This driver can also be built as a module. If so, the module
144 will be called tps6507x.
145
AnilKumar Chd48f4112012-01-11 16:11:41 +0530[diff] [blame]146config MFD_TPS65217
147 tristate "TPS65217 Power Management / White LED chips"
148 depends on I2C
149 select MFD_CORE
150 select REGMAP_I2C
151 help
152 If you say yes here you get support for the TPS65217 series of
153 Power Management / White LED chips.
154 These include voltage regulators, lithium ion/polymer battery
155 charger, wled and other features that are often used in portable
156 devices.
157
158 This driver can also be built as a module. If so, the module
159 will be called tps65217.
160
Axel Lin37df0032011-04-15 20:04:45 +0800[diff] [blame]161config MFD_TPS6586X
162 bool "TPS6586x Power Management chips"
163 depends on I2C=y && GPIOLIB && GENERIC_HARDIRQS
164 select MFD_CORE
Mark Brownb4410a82012-05-19 17:54:28 +0100[diff] [blame^]165 depends on REGULATOR
Axel Lin37df0032011-04-15 20:04:45 +0800[diff] [blame]166 help
167 If you say yes here you get support for the TPS6586X series of
168 Power Management chips.
169 This driver provides common support for accessing the device,
170 additional drivers must be enabled in order to use the
171 functionality of the device.
172
173 This driver can also be built as a module. If so, the module
174 will be called tps6586x.
175
Linus Walleij54f323b2011-07-04 17:34:16 +0200[diff] [blame]176config MFD_TPS65910
177 bool "TPS65910 Power Management chip"
178 depends on I2C=y && GPIOLIB
179 select MFD_CORE
180 select GPIO_TPS65910
Laxman Dewangandc9913a2012-02-21 18:21:34 +0530[diff] [blame]181 select REGMAP_I2C
Linus Walleij54f323b2011-07-04 17:34:16 +0200[diff] [blame]182 help
183 if you say yes here you get support for the TPS65910 series of
184 Power Management chips.
185
Margarita Olaya36e52872011-06-09 14:50:00 -0500[diff] [blame]186config MFD_TPS65912
Mark Brown56088012011-06-22 14:53:58 +0100[diff] [blame]187 bool
Margarita Olaya36e52872011-06-09 14:50:00 -0500[diff] [blame]188 depends on GPIOLIB
189
190config MFD_TPS65912_I2C
Axel Lin231dd9c2012-02-15 16:05:24 +0800[diff] [blame]191 bool "TPS65912 Power Management chip with I2C"
Margarita Olaya36e52872011-06-09 14:50:00 -0500[diff] [blame]192 select MFD_CORE
193 select MFD_TPS65912
194 depends on I2C=y && GPIOLIB
195 help
196 If you say yes here you get support for the TPS65912 series of
197 PM chips with I2C interface.
198
199config MFD_TPS65912_SPI
200 bool "TPS65912 Power Management chip with SPI"
201 select MFD_CORE
202 select MFD_TPS65912
203 depends on SPI_MASTER && GPIOLIB
204 help
205 If you say yes here you get support for the TPS65912 series of
206 PM chips with SPI interface.
207
David Brownell88e75cc2008-12-22 12:18:02 +0100[diff] [blame]208config MENELAUS
209 bool "Texas Instruments TWL92330/Menelaus PM chip"
Tony Lindgren088ef952010-02-12 12:26:47 -0800[diff] [blame]210 depends on I2C=y && ARCH_OMAP2
David Brownell88e75cc2008-12-22 12:18:02 +0100[diff] [blame]211 help
212 If you say yes here you get support for the Texas Instruments
213 TWL92330/Menelaus Power Management chip. This include voltage
Matt LaPlante692105b2009-01-26 11:12:25 +0100[diff] [blame]214 regulators, Dual slot memory card transceivers, real-time clock
David Brownell88e75cc2008-12-22 12:18:02 +0100[diff] [blame]215 and other features that are often used in portable devices like
216 cell phones and PDAs.
217
David Brownella603a7f2008-10-15 12:15:39 +0200[diff] [blame]218config TWL4030_CORE
Balaji T Ke8deb282009-12-14 00:25:31 +0100[diff] [blame]219 bool "Texas Instruments TWL4030/TWL5030/TWL6030/TPS659x0 Support"
Russell King62525472012-02-07 09:47:21 +0000[diff] [blame]220 depends on I2C=y && GENERIC_HARDIRQS
Grant Likely280ad7f2012-02-24 14:58:54 -0700[diff] [blame]221 select IRQ_DOMAIN
David Brownella603a7f2008-10-15 12:15:39 +0200[diff] [blame]222 help
Balaji T Ke8deb282009-12-14 00:25:31 +0100[diff] [blame]223 Say yes here if you have TWL4030 / TWL6030 family chip on your board.
David Brownella603a7f2008-10-15 12:15:39 +0200[diff] [blame]224 This core driver provides register access and IRQ handling
225 facilities, and registers devices for the various functions
226 so that function-specific drivers can bind to them.
227
228 These multi-function chips are found on many OMAP2 and OMAP3
229 boards, providing power management, RTC, GPIO, keypad, a
230 high speed USB OTG transceiver, an audio codec (on most
231 versions) and many other features.
232
Keerthyf99c1d42011-03-01 19:12:26 +0530[diff] [blame]233config TWL4030_MADC
234 tristate "Texas Instruments TWL4030 MADC"
235 depends on TWL4030_CORE
236 help
237 This driver provides support for triton TWL4030-MADC. The
238 driver supports both RT and SW conversion methods.
239
240 This driver can be built as a module. If so it will be
241 named twl4030-madc
242
Amit Kucheriaebf0bd32009-08-31 18:32:18 +0200[diff] [blame]243config TWL4030_POWER
244 bool "Support power resources on TWL4030 family chips"
245 depends on TWL4030_CORE && ARM
246 help
247 Say yes here if you want to use the power resources on the
248 TWL4030 family chips. Most of these resources are regulators,
249 which have a separate driver; some are control signals, such
250 as clock request handshaking.
251
252 This driver uses board-specific data to initialize the resources
Lucas De Marchi25985ed2011-03-30 22:57:33 -0300[diff] [blame]253 and load scripts controlling which resources are switched off/on
Amit Kucheriaebf0bd32009-08-31 18:32:18 +0200[diff] [blame]254 or reset when a sleep, wakeup or warm reset event occurs.
255
Peter Ujfalusi57fe7252011-05-31 12:02:49 +0300[diff] [blame]256config MFD_TWL4030_AUDIO
Peter Ujfalusi0b83dde2009-10-22 13:26:45 +0300[diff] [blame]257 bool
258 depends on TWL4030_CORE
259 select MFD_CORE
260 default n
261
Hemanth V31fc03d2010-07-14 12:04:56 +0200[diff] [blame]262config TWL6030_PWM
263 tristate "TWL6030 PWM (Pulse Width Modulator) Support"
264 depends on TWL4030_CORE
265 select HAVE_PWM
266 default n
267 help
268 Say yes here if you want support for TWL6030 PWM.
269 This is used to control charging LED brightness.
270
Misael Lopez Cruzf19b2822011-04-27 02:14:07 -0500[diff] [blame]271config TWL6040_CORE
Peter Ujfalusi8eaeb932012-04-03 11:56:51 +0300[diff] [blame]272 bool "Support for TWL6040 audio codec"
273 depends on I2C=y && GENERIC_HARDIRQS
Misael Lopez Cruzf19b2822011-04-27 02:14:07 -0500[diff] [blame]274 select MFD_CORE
Peter Ujfalusi8eaeb932012-04-03 11:56:51 +0300[diff] [blame]275 select REGMAP_I2C
Misael Lopez Cruzf19b2822011-04-27 02:14:07 -0500[diff] [blame]276 default n
Peter Ujfalusi8eaeb932012-04-03 11:56:51 +0300[diff] [blame]277 help
278 Say yes here if you want support for Texas Instruments TWL6040 audio
279 codec.
280 This driver provides common support for accessing the device,
281 additional drivers must be enabled in order to use the
282 functionality of the device (audio, vibra).
Misael Lopez Cruzf19b2822011-04-27 02:14:07 -0500[diff] [blame]283
Rabin Vincent27e34992010-07-02 16:52:08 +0530[diff] [blame]284config MFD_STMPE
285 bool "Support STMicroelectronics STMPE"
Viresh Kumare7899952011-11-17 11:02:21 +0530[diff] [blame]286 depends on (I2C=y || SPI_MASTER=y) && GENERIC_HARDIRQS
Rabin Vincent27e34992010-07-02 16:52:08 +0530[diff] [blame]287 select MFD_CORE
288 help
289 Support for the STMPE family of I/O Expanders from
290 STMicroelectronics.
291
292 Currently supported devices are:
293
294 STMPE811: GPIO, Touchscreen
295 STMPE1601: GPIO, Keypad
296 STMPE2401: GPIO, Keypad
297 STMPE2403: GPIO, Keypad
298
299 This driver provides common support for accessing the device,
300 additional drivers must be enabled in order to use the functionality
301 of the device. Currently available sub drivers are:
302
303 GPIO: stmpe-gpio
304 Keypad: stmpe-keypad
305 Touchscreen: stmpe-ts
306
Viresh Kumar1a6e4b72011-11-17 11:02:20 +0530[diff] [blame]307menu "STMPE Interface Drivers"
308depends on MFD_STMPE
309
310config STMPE_I2C
311 bool "STMPE I2C Inteface"
Samuel Ortizeedea802011-12-20 18:28:19 +0100[diff] [blame]312 depends on I2C=y
Viresh Kumar1a6e4b72011-11-17 11:02:20 +0530[diff] [blame]313 default y
314 help
315 This is used to enable I2C interface of STMPE
Viresh Kumare7899952011-11-17 11:02:21 +0530[diff] [blame]316
317config STMPE_SPI
318 bool "STMPE SPI Inteface"
319 depends on SPI_MASTER
320 help
321 This is used to enable SPI interface of STMPE
Viresh Kumar1a6e4b72011-11-17 11:02:20 +0530[diff] [blame]322endmenu
323
Sundar Iyerf4e8afd2010-12-13 09:33:13 +0530[diff] [blame]324config MFD_TC3589X
325 bool "Support Toshiba TC35892 and variants"
Rabin Vincentb4ecd322010-05-10 23:39:47 +0200[diff] [blame]326 depends on I2C=y && GENERIC_HARDIRQS
327 select MFD_CORE
328 help
Sundar Iyerf4e8afd2010-12-13 09:33:13 +0530[diff] [blame]329 Support for the Toshiba TC35892 and variants I/O Expander.
Rabin Vincentb4ecd322010-05-10 23:39:47 +0200[diff] [blame]330
331 This driver provides common support for accessing the device,
332 additional drivers must be enabled in order to use the
333 functionality of the device.
334
Samuel Ortiz1c2c30a2008-08-05 19:27:58 +0200[diff] [blame]335config MFD_TMIO
336 bool
337 default n
338
Ian Molton1f192012008-07-15 15:09:43 +0100[diff] [blame]339config MFD_T7L66XB
340 bool "Support Toshiba T7L66XB"
Al Viro9ca68232008-11-01 18:19:59 +0000[diff] [blame]341 depends on ARM && HAVE_CLK
Ian Molton1f192012008-07-15 15:09:43 +0100[diff] [blame]342 select MFD_CORE
Samuel Ortiz1c2c30a2008-08-05 19:27:58 +0200[diff] [blame]343 select MFD_TMIO
Ian Molton1f192012008-07-15 15:09:43 +0100[diff] [blame]344 help
345 Support for Toshiba Mobile IO Controller T7L66XB
346
Ian Moltoncbdfb422008-07-15 15:12:52 +0100[diff] [blame]347config MFD_TC6387XB
348 bool "Support Toshiba TC6387XB"
Al Viro9ca68232008-11-01 18:19:59 +0000[diff] [blame]349 depends on ARM && HAVE_CLK
Ian Moltoncbdfb422008-07-15 15:12:52 +0100[diff] [blame]350 select MFD_CORE
Samuel Ortiz1c2c30a2008-08-05 19:27:58 +0200[diff] [blame]351 select MFD_TMIO
Ian Moltoncbdfb422008-07-15 15:12:52 +0100[diff] [blame]352 help
353 Support for Toshiba Mobile IO Controller TC6387XB
354
Dmitry Baryshkovd6315942008-06-22 12:01:58 +0100[diff] [blame]355config MFD_TC6393XB
356 bool "Support Toshiba TC6393XB"
Christoph Fritze959da12011-11-29 19:38:38 +0100[diff] [blame]357 depends on GPIOLIB && ARM && HAVE_CLK
Dmitry Baryshkovf024ff12008-06-27 10:37:57 +0100[diff] [blame]358 select MFD_CORE
Samuel Ortiz1c2c30a2008-08-05 19:27:58 +0200[diff] [blame]359 select MFD_TMIO
Dmitry Baryshkovd6315942008-06-22 12:01:58 +0100[diff] [blame]360 help
361 Support for Toshiba Mobile IO Controller TC6393XB
362
Samuel Ortiz8e2eaab2008-10-24 17:10:05 +0200[diff] [blame]363config PMIC_DA903X
364 bool "Dialog Semiconductor DA9030/DA9034 PMIC Support"
365 depends on I2C=y
366 help
367 Say yes here to support for Dialog Semiconductor DA9030 (a.k.a
368 ARAVA) and DA9034 (a.k.a MICCO), these are Power Management IC
369 usually found on PXA processors-based platforms. This includes
370 the I2C driver and the core APIs _only_, you have to select
371 individual components like LCD backlight, voltage regulators,
372 LEDs and battery-charger under the corresponding menus.
373
Ashish Jangam84c99db2011-12-12 20:06:56 +0530[diff] [blame]374config PMIC_DA9052
375 bool
376 select MFD_CORE
377
Ashish Jangamcfe04472011-12-12 20:37:41 +0530[diff] [blame]378config MFD_DA9052_SPI
379 bool "Support Dialog Semiconductor DA9052/53 PMIC variants with SPI"
380 select REGMAP_SPI
381 select REGMAP_IRQ
382 select PMIC_DA9052
383 depends on SPI_MASTER=y
384 help
385 Support for the Dialog Semiconductor DA9052 PMIC
386 when controlled using SPI. This driver provides common support
387 for accessing the device, additional drivers must be enabled in
388 order to use the functionality of the device.
389
Ashish Jangam84c99db2011-12-12 20:06:56 +0530[diff] [blame]390config MFD_DA9052_I2C
391 bool "Support Dialog Semiconductor DA9052/53 PMIC variants with I2C"
392 select REGMAP_I2C
393 select REGMAP_IRQ
394 select PMIC_DA9052
395 depends on I2C=y
396 help
397 Support for the Dialog Semiconductor DA9052 PMIC
398 when controlled using I2C. This driver provides common support
399 for accessing the device, additional drivers must be enabled in
400 order to use the functionality of the device.
401
Michael Hennericha5736e02009-10-12 17:22:38 +0200[diff] [blame]402config PMIC_ADP5520
403 bool "Analog Devices ADP5520/01 MFD PMIC Core Support"
404 depends on I2C=y
405 help
406 Say yes here to add support for Analog Devices AD5520 and ADP5501,
407 Multifunction Power Management IC. This includes
408 the I2C driver and the core APIs _only_, you have to select
409 individual components like LCD backlight, LEDs, GPIOs and Kepad
410 under the corresponding menus.
411
Haojian Zhuangd50f8f32010-01-08 12:29:23 +0100[diff] [blame]412config MFD_MAX8925
Haojian Zhuang1f1cf8f2010-02-05 16:07:54 +0100[diff] [blame]413 bool "Maxim Semiconductor MAX8925 PMIC Support"
Geert Uytterhoeven8d002bd2009-12-15 21:49:57 +0100[diff] [blame]414 depends on I2C=y && GENERIC_HARDIRQS
Haojian Zhuang1ad99892010-01-08 12:43:29 -0500[diff] [blame]415 select MFD_CORE
Haojian Zhuangd50f8f32010-01-08 12:29:23 +0100[diff] [blame]416 help
417 Say yes here to support for Maxim Semiconductor MAX8925. This is
418 a Power Management IC. This driver provies common support for
419 accessing the device, additional drivers must be enabled in order
420 to use the functionality of the device.
421
MyungJoo Ham527e7e92011-03-04 15:50:26 +0900[diff] [blame]422config MFD_MAX8997
423 bool "Maxim Semiconductor MAX8997/8966 PMIC Support"
424 depends on I2C=y && GENERIC_HARDIRQS
425 select MFD_CORE
426 help
Axel Lin5a924d12012-03-01 09:31:25 +0800[diff] [blame]427 Say yes here to support for Maxim Semiconductor MAX8997/8966.
MyungJoo Ham527e7e92011-03-04 15:50:26 +0900[diff] [blame]428 This is a Power Management IC with RTC, Flash, Fuel Gauge, Haptic,
429 MUIC controls on chip.
Randy Dunlapd7e8c012011-03-14 11:28:37 +0100[diff] [blame]430 This driver provides common support for accessing the device;
MyungJoo Ham527e7e92011-03-04 15:50:26 +0900[diff] [blame]431 additional drivers must be enabled in order to use the functionality
432 of the device.
433
Kyungmin Park156f2522010-06-16 09:04:16 +0200[diff] [blame]434config MFD_MAX8998
Kyungmin Parkf8539dd2010-08-23 13:46:49 +0900[diff] [blame]435 bool "Maxim Semiconductor MAX8998/National LP3974 PMIC Support"
Joonyoung Shim2c7e6f52010-09-10 18:36:39 +0200[diff] [blame]436 depends on I2C=y && GENERIC_HARDIRQS
Kyungmin Park156f2522010-06-16 09:04:16 +0200[diff] [blame]437 select MFD_CORE
438 help
Kyungmin Parkf8539dd2010-08-23 13:46:49 +0900[diff] [blame]439 Say yes here to support for Maxim Semiconductor MAX8998 and
440 National Semiconductor LP3974. This is a Power Management IC.
441 This driver provies common support for accessing the device,
442 additional drivers must be enabled in order to use the functionality
443 of the device.
Kyungmin Park156f2522010-06-16 09:04:16 +0200[diff] [blame]444
Sangbeom Kimc3d4d692012-01-09 00:09:09 +0100[diff] [blame]445config MFD_S5M_CORE
446 bool "SAMSUNG S5M Series Support"
447 depends on I2C=y && GENERIC_HARDIRQS
448 select MFD_CORE
449 select REGMAP_I2C
450 help
451 Support for the Samsung Electronics S5M MFD series.
452 This driver provies common support for accessing the device,
453 additional drivers must be enabled in order to use the functionality
454 of the device
455
Mark Brown1d9f9f02008-09-10 18:58:42 +0100[diff] [blame]456config MFD_WM8400
457 tristate "Support Wolfson Microelectronics WM8400"
Mark Brownb8380c12008-12-18 10:54:22 +0100[diff] [blame]458 select MFD_CORE
Mark Brown9c366452008-10-24 17:16:11 +0200[diff] [blame]459 depends on I2C
Mark Brown2b247d02011-08-23 18:56:19 +0100[diff] [blame]460 select REGMAP_I2C
Mark Brown1d9f9f02008-09-10 18:58:42 +0100[diff] [blame]461 help
462 Support for the Wolfson Microelecronics WM8400 PMIC and audio
Mark Brown9e5aca52009-05-29 11:34:18 +0100[diff] [blame]463 CODEC. This driver provides common support for accessing
Mark Brown1d9f9f02008-09-10 18:58:42 +0100[diff] [blame]464 the device, additional drivers must be enabled in order to use
465 the functionality of the device.
466
Mark Brownb11062b2009-07-27 14:45:58 +0100[diff] [blame]467config MFD_WM831X
Mark Browne5b48682010-10-19 23:57:56 +0200[diff] [blame]468 bool
469 depends on GENERIC_HARDIRQS
470
471config MFD_WM831X_I2C
472 bool "Support Wolfson Microelectronics WM831x/2x PMICs with I2C"
Mark Brownb11062b2009-07-27 14:45:58 +0100[diff] [blame]473 select MFD_CORE
Mark Browne5b48682010-10-19 23:57:56 +0200[diff] [blame]474 select MFD_WM831X
Mark Brown1df59812011-06-10 19:28:10 +0100[diff] [blame]475 select REGMAP_I2C
Geert Uytterhoeven8d002bd2009-12-15 21:49:57 +0100[diff] [blame]476 depends on I2C=y && GENERIC_HARDIRQS
Mark Brownb11062b2009-07-27 14:45:58 +0100[diff] [blame]477 help
Mark Browne5b48682010-10-19 23:57:56 +0200[diff] [blame]478 Support for the Wolfson Microelecronics WM831x and WM832x PMICs
479 when controlled using I2C. This driver provides common support
480 for accessing the device, additional drivers must be enabled in
481 order to use the functionality of the device.
Mark Brownb11062b2009-07-27 14:45:58 +0100[diff] [blame]482
Mark Brown2aa13b92010-10-20 00:00:11 +0200[diff] [blame]483config MFD_WM831X_SPI
484 bool "Support Wolfson Microelectronics WM831x/2x PMICs with SPI"
485 select MFD_CORE
486 select MFD_WM831X
Mark Brown1df59812011-06-10 19:28:10 +0100[diff] [blame]487 select REGMAP_SPI
Mark Brown2aa13b92010-10-20 00:00:11 +0200[diff] [blame]488 depends on SPI_MASTER && GENERIC_HARDIRQS
489 help
490 Support for the Wolfson Microelecronics WM831x and WM832x PMICs
491 when controlled using SPI. This driver provides common support
492 for accessing the device, additional drivers must be enabled in
493 order to use the functionality of the device.
494
Mark Brown89b40122008-10-10 15:58:10 +0100[diff] [blame]495config MFD_WM8350
Mark Brownecf926b2010-01-05 20:40:47 +0000[diff] [blame]496 bool
Geert Uytterhoeven8d002bd2009-12-15 21:49:57 +0100[diff] [blame]497 depends on GENERIC_HARDIRQS
Mark Brown89b40122008-10-10 15:58:10 +0100[diff] [blame]498
499config MFD_WM8350_CONFIG_MODE_0
500 bool
501 depends on MFD_WM8350
502
503config MFD_WM8350_CONFIG_MODE_1
504 bool
505 depends on MFD_WM8350
506
507config MFD_WM8350_CONFIG_MODE_2
508 bool
509 depends on MFD_WM8350
510
511config MFD_WM8350_CONFIG_MODE_3
512 bool
513 depends on MFD_WM8350
514
Mark Brownca23f8c2008-12-18 23:12:28 +0100[diff] [blame]515config MFD_WM8351_CONFIG_MODE_0
516 bool
517 depends on MFD_WM8350
518
519config MFD_WM8351_CONFIG_MODE_1
520 bool
521 depends on MFD_WM8350
522
523config MFD_WM8351_CONFIG_MODE_2
524 bool
525 depends on MFD_WM8350
526
527config MFD_WM8351_CONFIG_MODE_3
528 bool
529 depends on MFD_WM8350
530
Mark Brown96920632008-12-18 23:09:50 +0100[diff] [blame]531config MFD_WM8352_CONFIG_MODE_0
532 bool
533 depends on MFD_WM8350
534
535config MFD_WM8352_CONFIG_MODE_1
536 bool
537 depends on MFD_WM8350
538
539config MFD_WM8352_CONFIG_MODE_2
540 bool
541 depends on MFD_WM8350
542
543config MFD_WM8352_CONFIG_MODE_3
544 bool
545 depends on MFD_WM8350
546
Mark Brownc661a0b2008-10-10 15:58:11 +0100[diff] [blame]547config MFD_WM8350_I2C
Mark Brownecf926b2010-01-05 20:40:47 +0000[diff] [blame]548 bool "Support Wolfson Microelectronics WM8350 with I2C"
Mark Brownc661a0b2008-10-10 15:58:11 +0100[diff] [blame]549 select MFD_WM8350
Geert Uytterhoeven8d002bd2009-12-15 21:49:57 +0100[diff] [blame]550 depends on I2C=y && GENERIC_HARDIRQS
Mark Brownc661a0b2008-10-10 15:58:11 +0100[diff] [blame]551 help
552 The WM8350 is an integrated audio and power management
553 subsystem with watchdog and RTC functionality for embedded
554 systems. This option enables core support for the WM8350 with
555 I2C as the control interface. Additional options must be
556 selected to enable support for the functionality of the chip.
557
Mark Brown9e501082010-01-29 18:20:29 +0000[diff] [blame]558config MFD_WM8994
Mark Brownc9fbf7e2010-03-26 16:49:15 +0000[diff] [blame]559 bool "Support Wolfson Microelectronics WM8994"
Mark Brown9e501082010-01-29 18:20:29 +0000[diff] [blame]560 select MFD_CORE
Mark Brownd6c645fc2011-06-17 13:02:27 +0100[diff] [blame]561 select REGMAP_I2C
Mark Brown8ab30692011-10-25 10:19:04 +0200[diff] [blame]562 select REGMAP_IRQ
Mark Brownc9fbf7e2010-03-26 16:49:15 +0000[diff] [blame]563 depends on I2C=y && GENERIC_HARDIRQS
Mark Brown9e501082010-01-29 18:20:29 +0000[diff] [blame]564 help
565 The WM8994 is a highly integrated hi-fi CODEC designed for
566 smartphone applicatiosn. As well as audio functionality it
567 has on board GPIO and regulator functionality which is
568 supported via the relevant subsystems. This driver provides
569 core support for the WM8994, in order to use the actual
570 functionaltiy of the device other drivers must be enabled.
571
Balaji Raof52046b2009-01-09 01:49:01 +0100[diff] [blame]572config MFD_PCF50633
573 tristate "Support for NXP PCF50633"
574 depends on I2C
Mark Brown6e3ad112011-08-08 17:04:40 +0900[diff] [blame]575 select REGMAP_I2C
Balaji Raof52046b2009-01-09 01:49:01 +0100[diff] [blame]576 help
577 Say yes here if you have NXP PCF50633 chip on your board.
578 This core driver provides register access and IRQ handling
579 facilities, and registers devices for the various functions
580 so that function-specific drivers can bind to them.
581
Axel Lin13051342011-04-15 20:06:37 +0800[diff] [blame]582config PCF50633_ADC
583 tristate "Support for NXP PCF50633 ADC"
584 depends on MFD_PCF50633
585 help
586 Say yes here if you want to include support for ADC in the
587 NXP PCF50633 chip.
588
589config PCF50633_GPIO
590 tristate "Support for NXP PCF50633 GPIO"
591 depends on MFD_PCF50633
592 help
593 Say yes here if you want to include support GPIO for pins on
594 the PCF50633 chip.
595
Sascha Hauer8238add2009-08-19 01:40:28 +0200[diff] [blame]596config MFD_MC13783
Uwe Kleine-König8e005932010-09-28 16:37:20 +0200[diff] [blame]597 tristate
598
599config MFD_MC13XXX
600 tristate "Support Freescale MC13783 and MC13892"
Sascha Hauer8238add2009-08-19 01:40:28 +0200[diff] [blame]601 depends on SPI_MASTER
602 select MFD_CORE
Uwe Kleine-König8e005932010-09-28 16:37:20 +0200[diff] [blame]603 select MFD_MC13783
Sascha Hauer8238add2009-08-19 01:40:28 +0200[diff] [blame]604 help
Uwe Kleine-König8e005932010-09-28 16:37:20 +0200[diff] [blame]605 Support for the Freescale (Atlas) PMIC and audio CODECs
606 MC13783 and MC13892.
Sascha Hauer8238add2009-08-19 01:40:28 +0200[diff] [blame]607 This driver provides common support for accessing the device,
608 additional drivers must be enabled in order to use the
609 functionality of the device.
610
Mattias Wallinfa661252010-05-01 18:26:20 +0200[diff] [blame]611config ABX500_CORE
612 bool "ST-Ericsson ABX500 Mixed Signal Circuit register functions"
Mattias Wallin47c16972010-09-10 17:47:56 +0200[diff] [blame]613 default y if ARCH_U300 || ARCH_U8500
Mattias Wallinfa661252010-05-01 18:26:20 +0200[diff] [blame]614 help
615 Say yes here if you have the ABX500 Mixed Signal IC family
616 chips. This core driver expose register access functions.
617 Functionality specific drivers using these functions can
618 remain unchanged when IC changes. Binding of the functions to
619 actual register access is done by the IC core driver.
620
Linus Walleij14fa5692009-05-21 23:17:06 +0200[diff] [blame]621config AB3100_CORE
Linus Walleij2071db42010-01-19 11:41:52 +0100[diff] [blame]622 bool "ST-Ericsson AB3100 Mixed Signal Circuit core functions"
Mattias Wallinfa661252010-05-01 18:26:20 +0200[diff] [blame]623 depends on I2C=y && ABX500_CORE
Linus Walleij8c96aef2010-08-20 10:27:12 +0200[diff] [blame]624 select MFD_CORE
Linus Walleij14fa5692009-05-21 23:17:06 +0200[diff] [blame]625 default y if ARCH_U300
626 help
627 Select this to enable the AB3100 Mixed Signal IC core
628 functionality. This connects to a AB3100 on the I2C bus
629 and expose a number of symbols needed for dependent devices
630 to read and write registers and subscribe to events from
631 this multi-functional IC. This is needed to use other features
632 of the AB3100 such as battery-backed RTC, charging control,
633 LEDs, vibrator, system power and temperature, power management
634 and ALSA sound.
635
Linus Walleij12992dd2009-08-18 22:52:26 +0200[diff] [blame]636config AB3100_OTP
637 tristate "ST-Ericsson AB3100 OTP functions"
638 depends on AB3100_CORE
639 default y if AB3100_CORE
640 help
641 Select this to enable the AB3100 Mixed Signal IC OTP (one-time
642 programmable memory) support. This exposes a sysfs file to read
643 out OTP values.
644
Daniel Ribeiro13a09f92009-05-28 15:43:37 -0300[diff] [blame]645config EZX_PCAP
646 bool "PCAP Support"
647 depends on GENERIC_HARDIRQS && SPI_MASTER
648 help
649 This enables the PCAP ASIC present on EZX Phones. This is
650 needed for MMC, TouchScreen, Sound, USB, etc..
651
Mattias Wallin3d5e2ca2011-09-22 08:22:18 +0200[diff] [blame]652config AB5500_CORE
653 bool "ST-Ericsson AB5500 Mixed Signal Power Management chip"
654 depends on ABX500_CORE && MFD_DB5500_PRCMU
655 select MFD_CORE
656 help
657 Select this option to enable access to AB5500 power management
658 chip. This connects to the db5500 chip via the I2C bus via PRCMU.
659 This chip embeds various other multimedia funtionalities as well.
660
Linus Walleij94be70d2011-09-22 08:22:33 +0200[diff] [blame]661config AB5500_DEBUG
662 bool "Enable debug info via debugfs"
663 depends on AB5500_CORE && DEBUG_FS
664 default y if DEBUG_FS
665 help
666 Select this option if you want debug information from the AB5500
667 using the debug filesystem, debugfs.
668
Rabin Vincent62579262010-05-19 11:39:02 +0200[diff] [blame]669config AB8500_CORE
670 bool "ST-Ericsson AB8500 Mixed Signal Power Management chip"
Sundar Iyer6680d942010-12-24 11:52:08 +0100[diff] [blame]671 depends on GENERIC_HARDIRQS && ABX500_CORE
Rabin Vincent62579262010-05-19 11:39:02 +0200[diff] [blame]672 select MFD_CORE
Srinidhi Kasagar0c418392009-10-12 17:11:52 +0200[diff] [blame]673 help
Rabin Vincent62579262010-05-19 11:39:02 +0200[diff] [blame]674 Select this option to enable access to AB8500 power management
Sundar Iyer6680d942010-12-24 11:52:08 +0100[diff] [blame]675 chip. This connects to U8500 either on the SSP/SPI bus (deprecated
676 since hardware version v1.0) or the I2C bus via PRCMU. It also adds
677 the irq_chip parts for handling the Mixed Signal chip events.
Srinidhi Kasagar0c418392009-10-12 17:11:52 +0200[diff] [blame]678 This chip embeds various other multimedia funtionalities as well.
679
Mattias Wallin39368ed2010-09-15 13:12:03 +0200[diff] [blame]680config AB8500_I2C_CORE
681 bool "AB8500 register access via PRCMU I2C"
Linus Walleij650c2a22011-05-15 22:53:56 +0200[diff] [blame]682 depends on AB8500_CORE && MFD_DB8500_PRCMU
Mattias Wallin39368ed2010-09-15 13:12:03 +0200[diff] [blame]683 default y
684 help
685 This enables register access to the AB8500 chip via PRCMU I2C.
686 The AB8500 chip can be accessed via SPI or I2C. On DB8500 hardware
687 the I2C bus is connected to the Power Reset
688 and Mangagement Unit, PRCMU.
689
Mattias Wallin5814fc32010-09-13 16:05:04 +0200[diff] [blame]690config AB8500_DEBUG
691 bool "Enable debug info via debugfs"
692 depends on AB8500_CORE && DEBUG_FS
693 default y if DEBUG_FS
694 help
695 Select this option if you want debug information using the debug
696 filesystem, debugfs.
697
Arun Murthydae2db32011-02-22 10:11:13 +0100[diff] [blame]698config AB8500_GPADC
699 bool "AB8500 GPADC driver"
700 depends on AB8500_CORE && REGULATOR_AB8500
701 default y
702 help
703 AB8500 GPADC driver used to convert Acc and battery/ac/usb voltage
704
Linus Walleij650c2a22011-05-15 22:53:56 +0200[diff] [blame]705config MFD_DB8500_PRCMU
706 bool "ST-Ericsson DB8500 Power Reset Control Management Unit"
707 depends on UX500_SOC_DB8500
708 select MFD_CORE
709 help
710 Select this option to enable support for the DB8500 Power Reset
711 and Control Management Unit. This is basically an autonomous
712 system controller running an XP70 microprocessor, which is accessed
713 through a register map.
714
Linus Walleij83177972011-05-03 18:14:48 +0200[diff] [blame]715config MFD_DB5500_PRCMU
716 bool "ST-Ericsson DB5500 Power Reset Control Management Unit"
717 depends on UX500_SOC_DB5500
718 select MFD_CORE
719 help
720 Select this option to enable support for the DB5500 Power Reset
721 and Control Management Unit. This is basically an autonomous
722 system controller running an XP70 microprocessor, which is accessed
723 through a register map.
724
Andres Salomonf71e1af2010-11-26 11:52:35 +0100[diff] [blame]725config MFD_CS5535
726 tristate "Support for CS5535 and CS5536 southbridge core functions"
727 select MFD_CORE
Andres Salomon15b7cf12011-03-27 21:26:03 -0700[diff] [blame]728 depends on PCI && X86
Andres Salomonf71e1af2010-11-26 11:52:35 +0100[diff] [blame]729 ---help---
730 This is the core driver for CS5535/CS5536 MFD functions. This is
731 necessary for using the board's GPIO and MFGPT functionality.
732
Richard Röjfors8edbede2010-02-04 08:18:52 -0300[diff] [blame]733config MFD_TIMBERDALE
734 tristate "Support for the Timberdale FPGA"
735 select MFD_CORE
Randy Dunlap546e29b62010-02-12 12:30:55 -0300[diff] [blame]736 depends on PCI && GPIOLIB
Richard Röjfors8edbede2010-02-04 08:18:52 -0300[diff] [blame]737 ---help---
738 This is the core driver for the timberdale FPGA. This device is a
739 multifunction device which exposes numerous platform devices.
740
741 The timberdale FPGA can be found on the Intel Atom development board
742 for in-vehicle infontainment, called Russellville.
Denis Turischeve82c60a2010-02-19 11:26:25 +0100[diff] [blame]743
744config LPC_SCH
745 tristate "Intel SCH LPC"
746 depends on PCI
747 select MFD_CORE
748 help
749 LPC bridge function of the Intel SCH provides support for
750 System Management Bus and General Purpose I/O.
751
Florian Fainellie090d502010-03-21 01:06:05 +0100[diff] [blame]752config MFD_RDC321X
753 tristate "Support for RDC-R321x southbridge"
754 select MFD_CORE
755 depends on PCI
756 help
757 Say yes here if you want to have support for the RDC R-321x SoC
758 southbridge which provides access to GPIOs and Watchdog using the
759 southbridge PCI device configuration space.
760
Ira W. Snyderbd358132010-04-07 09:43:00 +0200[diff] [blame]761config MFD_JANZ_CMODIO
762 tristate "Support for Janz CMOD-IO PCI MODULbus Carrier Board"
763 select MFD_CORE
764 depends on PCI
765 help
766 This is the core driver for the Janz CMOD-IO PCI MODULbus
767 carrier board. This device is a PCI to MODULbus bridge which may
768 host many different types of MODULbus daughterboards, including
769 CAN and GPIO controllers.
770
Lars-Peter Clausen91f4deb2010-07-12 03:48:08 +0200[diff] [blame]771config MFD_JZ4740_ADC
Lars-Peter Clausen914e6d42011-06-03 03:14:26 +0200[diff] [blame]772 bool "Support for the JZ4740 SoC ADC core"
Lars-Peter Clausen91f4deb2010-07-12 03:48:08 +0200[diff] [blame]773 select MFD_CORE
Lars-Peter Clausen914e6d42011-06-03 03:14:26 +0200[diff] [blame]774 select GENERIC_IRQ_CHIP
Lars-Peter Clausen91f4deb2010-07-12 03:48:08 +0200[diff] [blame]775 depends on MACH_JZ4740
776 help
777 Say yes here if you want support for the ADC unit in the JZ4740 SoC.
778 This driver is necessary for jz4740-battery and jz4740-hwmon driver.
779
Daniel Drake375fc772010-09-30 21:55:41 +0100[diff] [blame]780config MFD_VX855
781 tristate "Support for VIA VX855/VX875 integrated south bridge"
782 depends on PCI
783 select MFD_CORE
784 help
785 Say yes here to enable support for various functions of the
786 VIA VX855/VX875 south bridge. You will need to enable the vx855_spi
787 and/or vx855_gpio drivers for this to do anything useful.
788
Matti Aaltonen383268a2010-12-10 11:41:33 -0300[diff] [blame]789config MFD_WL1273_CORE
Matti Aaltonen94fd5b72011-03-01 10:10:35 -0300[diff] [blame]790 tristate "Support for TI WL1273 FM radio."
Matti Aaltonen383268a2010-12-10 11:41:33 -0300[diff] [blame]791 depends on I2C
792 select MFD_CORE
793 default n
794 help
795 This is the core driver for the TI WL1273 FM radio. This MFD
796 driver connects the radio-wl1273 V4L2 module and the wl1273
797 audio codec.
798
Keshava Munegowda17cdd292011-03-01 20:08:17 +0530[diff] [blame]799config MFD_OMAP_USB_HOST
800 bool "Support OMAP USBHS core driver"
801 depends on USB_EHCI_HCD_OMAP || USB_OHCI_HCD_OMAP3
802 default y
803 help
804 This is the core driver for the OAMP EHCI and OHCI drivers.
805 This MFD driver does the required setup functionalities for
806 OMAP USB Host drivers.
807
Abhijeet Dharmapurikarcbdb53e2011-04-05 14:40:52 -0700[diff] [blame]808config MFD_PM8XXX
809 tristate
810
811config MFD_PM8921_CORE
812 tristate "Qualcomm PM8921 PMIC chip"
813 depends on MSM_SSBI
814 select MFD_CORE
815 select MFD_PM8XXX
816 help
817 If you say yes to this option, support will be included for the
818 built-in PM8921 PMIC chip.
819
820 This is required if your board has a PM8921 and uses its features,
821 such as: MPPs, GPIOs, regulators, interrupts, and PWM.
822
823 Say M here if you want to include support for PM8921 chip as a module.
824 This will build a module called "pm8921-core".
825
Abhijeet Dharmapurikarc013f0a2011-04-05 14:40:53 -0700[diff] [blame]826config MFD_PM8XXX_IRQ
827 bool "Support for Qualcomm PM8xxx IRQ features"
828 depends on MFD_PM8XXX
829 default y if MFD_PM8XXX
830 help
831 This is the IRQ driver for Qualcomm PM 8xxx PMIC chips.
832
833 This is required to use certain other PM 8xxx features, such as GPIO
834 and MPP.
835
Axel Lin8509e142011-06-23 10:15:51 +0800[diff] [blame]836config TPS65911_COMPARATOR
837 tristate
838
Venu Byravarasu3c33be062012-03-16 11:10:19 +0530[diff] [blame]839config MFD_TPS65090
840 bool "TPS65090 Power Management chips"
841 depends on I2C=y && GENERIC_HARDIRQS
842 select MFD_CORE
843 select REGMAP_I2C
844 help
845 If you say yes here you get support for the TPS65090 series of
846 Power Management chips.
847 This driver provides common support for accessing the device,
848 additional drivers must be enabled in order to use the
849 functionality of the device.
850
Jin Park09d62922011-07-04 19:48:12 +0200[diff] [blame]851config MFD_AAT2870_CORE
852 bool "Support for the AnalogicTech AAT2870"
853 select MFD_CORE
854 depends on I2C=y && GPIOLIB
855 help
856 If you say yes here you get support for the AAT2870.
857 This driver provides common support for accessing the device,
858 additional drivers must be enabled in order to use the
859 functionality of the device.
860
Mika Westerberg1f5a3712011-09-21 13:03:07 +0200[diff] [blame]861config MFD_INTEL_MSIC
862 bool "Support for Intel MSIC"
863 depends on INTEL_SCU_IPC
864 select MFD_CORE
865 help
866 Select this option to enable access to Intel MSIC (Avatele
867 Passage) chip. This chip embeds audio, battery, GPIO, etc.
868 devices used in Intel Medfield platforms.
869
Laxman Dewangan1b1247d2012-02-28 18:35:17 +0530[diff] [blame]870config MFD_RC5T583
871 bool "Ricoh RC5T583 Power Management system device"
Laxman Dewangan5364d0b82012-03-19 11:44:55 +0530[diff] [blame]872 depends on I2C=y && GENERIC_HARDIRQS
Laxman Dewangan1b1247d2012-02-28 18:35:17 +0530[diff] [blame]873 select MFD_CORE
874 select REGMAP_I2C
875 help
876 Select this option to get support for the RICOH583 Power
877 Management system device.
878 This driver provides common support for accessing the device
879 through i2c interface. The device supports multiple sub-devices
880 like GPIO, interrupts, RTC, LDO and DCDC regulators, onkey.
881 Additional drivers must be enabled in order to use the
882 different functionality of the device.
883
Ying-Chun Liu (PaulLiu)75060a12012-03-16 21:12:32 +0100[diff] [blame]884config MFD_ANATOP
885 bool "Support for Freescale i.MX on-chip ANATOP controller"
886 depends on SOC_IMX6Q
887 help
888 Select this option to enable Freescale i.MX on-chip ANATOP
889 MFD controller. This controller embeds regulator and
890 thermal devices for Freescale i.MX platforms.
891
Arnd Bergmann8a0a8e82011-09-02 16:43:36 +0200[diff] [blame]892endmenu
893endif
Ben Dooksb6d64542007-02-20 13:58:01 -0800[diff] [blame]894
Russell Kinga4e137a2005-08-18 10:06:59 +0100[diff] [blame]895menu "Multimedia Capabilities Port drivers"
Adrian Bunkf751d502006-03-24 03:18:21 -0800[diff] [blame]896 depends on ARCH_SA1100
Russell Kinga4e137a2005-08-18 10:06:59 +0100[diff] [blame]897
898config MCP
899 tristate
900
Russell King5e742ad2005-08-18 10:08:15 +0100[diff] [blame]901# Interface drivers
902config MCP_SA11X0
903 tristate "Support SA11x0 MCP interface"
904 depends on ARCH_SA1100
905 select MCP
906
Russell King05c45ca2005-09-11 10:26:31 +0100[diff] [blame]907# Chip drivers
908config MCP_UCB1200
Russell Kinga3364402012-01-21 14:58:28 +0000[diff] [blame]909 bool "Support for UCB1200 / UCB1300"
910 depends on MCP_SA11X0
911 select MCP
Russell King05c45ca2005-09-11 10:26:31 +0100[diff] [blame]912
Russell Kingacb45432005-09-11 10:26:57 +0100[diff] [blame]913config MCP_UCB1200_TS
914 tristate "Touchscreen interface support"
915 depends on MCP_UCB1200 && INPUT
916
Russell Kinga4e137a2005-08-18 10:06:59 +0100[diff] [blame]917endmenu