Gitiles
Code Review Sign In
gerrit-public.fairphone.software / kernel / msm-4.19 / b5abb085f5540a612b0b7a6326ae2a07de2330dd / . / arch / arm / boot / dts / vexpress-v2m-rs1.dtsi
blob: d8a827bd2bf3728984621d1c45d90b640e8373db [file] [log] [blame]
Pawel Moll6a371952011-12-09 18:47:39 +0000[diff] [blame]1/*
2 * ARM Ltd. Versatile Express
3 *
4 * Motherboard Express uATX
5 * V2M-P1
6 *
7 * HBI-0190D
8 *
9 * RS1 memory map ("ARM Cortex-A Series memory map" in the board's
10 * Technical Reference Manual)
11 *
12 * WARNING! The hardware described in this file is independent from the
13 * original variant (vexpress-v2m.dtsi), but there is a strong
14 * correspondence between the two configurations.
15 *
16 * TAKE CARE WHEN MAINTAINING THIS FILE TO PROPAGATE ANY RELEVANT
17 * CHANGES TO vexpress-v2m.dtsi!
18 */
19
20/ {
21 aliases {
22 arm,v2m_timer = &v2m_timer01;
23 };
24
25 motherboard {
26 compatible = "simple-bus";
27 arm,v2m-memory-map = "rs1";
28 #address-cells = <2>; /* SMB chipselect number and offset */
29 #size-cells = <1>;
30 #interrupt-cells = <1>;
31
32 flash@0,00000000 {
33 compatible = "arm,vexpress-flash", "cfi-flash";
34 reg = <0 0x00000000 0x04000000>,
35 <4 0x00000000 0x04000000>;
36 bank-width = <4>;
37 };
38
39 psram@1,00000000 {
40 compatible = "arm,vexpress-psram", "mtd-ram";
41 reg = <1 0x00000000 0x02000000>;
42 bank-width = <4>;
43 };
44
45 vram@2,00000000 {
46 compatible = "arm,vexpress-vram";
47 reg = <2 0x00000000 0x00800000>;
48 };
49
50 ethernet@2,02000000 {
51 compatible = "smsc,lan9118", "smsc,lan9115";
52 reg = <2 0x02000000 0x10000>;
53 interrupts = <15>;
54 phy-mode = "mii";
55 reg-io-width = <4>;
56 smsc,irq-active-high;
57 smsc,irq-push-pull;
Pawel Mollb2a54ff2012-07-09 11:33:47 +0100[diff] [blame]58 vdd33a-supply = <&v2m_fixed_3v3>;
59 vddvario-supply = <&v2m_fixed_3v3>;
Pawel Moll6a371952011-12-09 18:47:39 +0000[diff] [blame]60 };
61
62 usb@2,03000000 {
63 compatible = "nxp,usb-isp1761";
64 reg = <2 0x03000000 0x20000>;
65 interrupts = <16>;
66 port1-otg;
67 };
68
69 iofpga@3,00000000 {
70 compatible = "arm,amba-bus", "simple-bus";
71 #address-cells = <1>;
72 #size-cells = <1>;
73 ranges = <0 3 0 0x200000>;
74
75 sysreg@010000 {
76 compatible = "arm,vexpress-sysreg";
77 reg = <0x010000 0x1000>;
78 };
79
80 sysctl@020000 {
81 compatible = "arm,sp810", "arm,primecell";
82 reg = <0x020000 0x1000>;
83 };
84
85 /* PCI-E I2C bus */
86 v2m_i2c_pcie: i2c@030000 {
87 compatible = "arm,versatile-i2c";
88 reg = <0x030000 0x1000>;
89
90 #address-cells = <1>;
91 #size-cells = <0>;
92
93 pcie-switch@60 {
94 compatible = "idt,89hpes32h8";
95 reg = <0x60>;
96 };
97 };
98
99 aaci@040000 {
100 compatible = "arm,pl041", "arm,primecell";
101 reg = <0x040000 0x1000>;
102 interrupts = <11>;
103 };
104
105 mmci@050000 {
106 compatible = "arm,pl180", "arm,primecell";
107 reg = <0x050000 0x1000>;
108 interrupts = <9 10>;
109 };
110
111 kmi@060000 {
112 compatible = "arm,pl050", "arm,primecell";
113 reg = <0x060000 0x1000>;
114 interrupts = <12>;
115 };
116
117 kmi@070000 {
118 compatible = "arm,pl050", "arm,primecell";
119 reg = <0x070000 0x1000>;
120 interrupts = <13>;
121 };
122
123 v2m_serial0: uart@090000 {
124 compatible = "arm,pl011", "arm,primecell";
125 reg = <0x090000 0x1000>;
126 interrupts = <5>;
127 };
128
129 v2m_serial1: uart@0a0000 {
130 compatible = "arm,pl011", "arm,primecell";
131 reg = <0x0a0000 0x1000>;
132 interrupts = <6>;
133 };
134
135 v2m_serial2: uart@0b0000 {
136 compatible = "arm,pl011", "arm,primecell";
137 reg = <0x0b0000 0x1000>;
138 interrupts = <7>;
139 };
140
141 v2m_serial3: uart@0c0000 {
142 compatible = "arm,pl011", "arm,primecell";
143 reg = <0x0c0000 0x1000>;
144 interrupts = <8>;
145 };
146
147 wdt@0f0000 {
148 compatible = "arm,sp805", "arm,primecell";
149 reg = <0x0f0000 0x1000>;
150 interrupts = <0>;
151 };
152
153 v2m_timer01: timer@110000 {
154 compatible = "arm,sp804", "arm,primecell";
155 reg = <0x110000 0x1000>;
156 interrupts = <2>;
157 };
158
159 v2m_timer23: timer@120000 {
160 compatible = "arm,sp804", "arm,primecell";
161 reg = <0x120000 0x1000>;
Pawel Mollb7541a92012-07-04 13:40:40 +0100[diff] [blame]162 interrupts = <3>;
Pawel Moll6a371952011-12-09 18:47:39 +0000[diff] [blame]163 };
164
165 /* DVI I2C bus */
166 v2m_i2c_dvi: i2c@160000 {
167 compatible = "arm,versatile-i2c";
168 reg = <0x160000 0x1000>;
169
170 #address-cells = <1>;
171 #size-cells = <0>;
172
173 dvi-transmitter@39 {
174 compatible = "sil,sii9022-tpi", "sil,sii9022";
175 reg = <0x39>;
176 };
177
178 dvi-transmitter@60 {
179 compatible = "sil,sii9022-cpi", "sil,sii9022";
180 reg = <0x60>;
181 };
182 };
183
184 rtc@170000 {
185 compatible = "arm,pl031", "arm,primecell";
186 reg = <0x170000 0x1000>;
187 interrupts = <4>;
188 };
189
190 compact-flash@1a0000 {
191 compatible = "arm,vexpress-cf", "ata-generic";
192 reg = <0x1a0000 0x100
193 0x1a0100 0xf00>;
194 reg-shift = <2>;
195 };
196
197 clcd@1f0000 {
198 compatible = "arm,pl111", "arm,primecell";
199 reg = <0x1f0000 0x1000>;
200 interrupts = <14>;
201 };
202 };
Pawel Mollb2a54ff2012-07-09 11:33:47 +0100[diff] [blame]203
204 v2m_fixed_3v3: fixedregulator@0 {
205 compatible = "regulator-fixed";
206 regulator-name = "3V3";
207 regulator-min-microvolt = <3300000>;
208 regulator-max-microvolt = <3300000>;
209 regulator-always-on;
210 };
Pawel Moll6a371952011-12-09 18:47:39 +0000[diff] [blame]211 };
212};