Kim, Milo | ade7515 | 2012-07-18 14:32:57 +0000 | [diff] [blame] | 1 | /* |
| 2 | * TI LP8788 MFD - buck regulator driver |
| 3 | * |
| 4 | * Copyright 2012 Texas Instruments |
| 5 | * |
| 6 | * Author: Milo(Woogyom) Kim <milo.kim@ti.com> |
| 7 | * |
| 8 | * This program is free software; you can redistribute it and/or modify |
| 9 | * it under the terms of the GNU General Public License version 2 as |
| 10 | * published by the Free Software Foundation. |
| 11 | * |
| 12 | */ |
| 13 | |
| 14 | #include <linux/module.h> |
| 15 | #include <linux/slab.h> |
| 16 | #include <linux/err.h> |
| 17 | #include <linux/platform_device.h> |
| 18 | #include <linux/regulator/driver.h> |
| 19 | #include <linux/mfd/lp8788.h> |
| 20 | #include <linux/gpio.h> |
| 21 | |
| 22 | /* register address */ |
| 23 | #define LP8788_EN_BUCK 0x0C |
| 24 | #define LP8788_BUCK_DVS_SEL 0x1D |
| 25 | #define LP8788_BUCK1_VOUT0 0x1E |
| 26 | #define LP8788_BUCK1_VOUT1 0x1F |
| 27 | #define LP8788_BUCK1_VOUT2 0x20 |
| 28 | #define LP8788_BUCK1_VOUT3 0x21 |
| 29 | #define LP8788_BUCK2_VOUT0 0x22 |
| 30 | #define LP8788_BUCK2_VOUT1 0x23 |
| 31 | #define LP8788_BUCK2_VOUT2 0x24 |
| 32 | #define LP8788_BUCK2_VOUT3 0x25 |
| 33 | #define LP8788_BUCK3_VOUT 0x26 |
| 34 | #define LP8788_BUCK4_VOUT 0x27 |
| 35 | #define LP8788_BUCK1_TIMESTEP 0x28 |
| 36 | #define LP8788_BUCK_PWM 0x2D |
| 37 | |
| 38 | /* mask/shift bits */ |
| 39 | #define LP8788_EN_BUCK1_M BIT(0) /* Addr 0Ch */ |
| 40 | #define LP8788_EN_BUCK2_M BIT(1) |
| 41 | #define LP8788_EN_BUCK3_M BIT(2) |
| 42 | #define LP8788_EN_BUCK4_M BIT(3) |
| 43 | #define LP8788_BUCK1_DVS_SEL_M 0x04 /* Addr 1Dh */ |
| 44 | #define LP8788_BUCK1_DVS_M 0x03 |
| 45 | #define LP8788_BUCK1_DVS_S 0 |
| 46 | #define LP8788_BUCK2_DVS_SEL_M 0x40 |
| 47 | #define LP8788_BUCK2_DVS_M 0x30 |
| 48 | #define LP8788_BUCK2_DVS_S 4 |
| 49 | #define LP8788_BUCK1_DVS_I2C BIT(2) |
| 50 | #define LP8788_BUCK2_DVS_I2C BIT(6) |
| 51 | #define LP8788_BUCK1_DVS_PIN (0 << 2) |
| 52 | #define LP8788_BUCK2_DVS_PIN (0 << 6) |
| 53 | #define LP8788_VOUT_M 0x1F /* Addr 1Eh ~ 27h */ |
| 54 | #define LP8788_STARTUP_TIME_M 0xF8 /* Addr 28h ~ 2Bh */ |
| 55 | #define LP8788_STARTUP_TIME_S 3 |
| 56 | #define LP8788_FPWM_BUCK1_M BIT(0) /* Addr 2Dh */ |
| 57 | #define LP8788_FPWM_BUCK1_S 0 |
| 58 | #define LP8788_FPWM_BUCK2_M BIT(1) |
| 59 | #define LP8788_FPWM_BUCK2_S 1 |
| 60 | #define LP8788_FPWM_BUCK3_M BIT(2) |
| 61 | #define LP8788_FPWM_BUCK3_S 2 |
| 62 | #define LP8788_FPWM_BUCK4_M BIT(3) |
| 63 | #define LP8788_FPWM_BUCK4_S 3 |
| 64 | |
| 65 | #define INVALID_ADDR 0xFF |
| 66 | #define LP8788_FORCE_PWM 1 |
| 67 | #define LP8788_AUTO_PWM 0 |
| 68 | #define PIN_LOW 0 |
| 69 | #define PIN_HIGH 1 |
| 70 | #define ENABLE_TIME_USEC 32 |
| 71 | |
Axel Lin | 0f4c46d | 2012-07-20 23:10:55 +0800 | [diff] [blame] | 72 | #define BUCK_FPWM_MASK(x) (1 << (x)) |
| 73 | #define BUCK_FPWM_SHIFT(x) (x) |
| 74 | |
Kim, Milo | ade7515 | 2012-07-18 14:32:57 +0000 | [diff] [blame] | 75 | enum lp8788_dvs_state { |
| 76 | DVS_LOW = GPIOF_OUT_INIT_LOW, |
| 77 | DVS_HIGH = GPIOF_OUT_INIT_HIGH, |
| 78 | }; |
| 79 | |
| 80 | enum lp8788_dvs_mode { |
| 81 | REGISTER, |
| 82 | EXTPIN, |
| 83 | }; |
| 84 | |
| 85 | enum lp8788_buck_id { |
| 86 | BUCK1, |
| 87 | BUCK2, |
| 88 | BUCK3, |
| 89 | BUCK4, |
| 90 | }; |
| 91 | |
Kim, Milo | ade7515 | 2012-07-18 14:32:57 +0000 | [diff] [blame] | 92 | struct lp8788_buck { |
| 93 | struct lp8788 *lp; |
| 94 | struct regulator_dev *regulator; |
Kim, Milo | ade7515 | 2012-07-18 14:32:57 +0000 | [diff] [blame] | 95 | void *dvs; |
| 96 | }; |
| 97 | |
| 98 | /* BUCK 1 ~ 4 voltage table */ |
| 99 | static const int lp8788_buck_vtbl[] = { |
| 100 | 500000, 800000, 850000, 900000, 950000, 1000000, 1050000, 1100000, |
| 101 | 1150000, 1200000, 1250000, 1300000, 1350000, 1400000, 1450000, 1500000, |
| 102 | 1550000, 1600000, 1650000, 1700000, 1750000, 1800000, 1850000, 1900000, |
| 103 | 1950000, 2000000, |
| 104 | }; |
| 105 | |
Kim, Milo | ade7515 | 2012-07-18 14:32:57 +0000 | [diff] [blame] | 106 | static const u8 buck1_vout_addr[] = { |
| 107 | LP8788_BUCK1_VOUT0, LP8788_BUCK1_VOUT1, |
| 108 | LP8788_BUCK1_VOUT2, LP8788_BUCK1_VOUT3, |
| 109 | }; |
| 110 | |
| 111 | static const u8 buck2_vout_addr[] = { |
| 112 | LP8788_BUCK2_VOUT0, LP8788_BUCK2_VOUT1, |
| 113 | LP8788_BUCK2_VOUT2, LP8788_BUCK2_VOUT3, |
| 114 | }; |
| 115 | |
| 116 | static void lp8788_buck1_set_dvs(struct lp8788_buck *buck) |
| 117 | { |
| 118 | struct lp8788_buck1_dvs *dvs = (struct lp8788_buck1_dvs *)buck->dvs; |
| 119 | enum lp8788_dvs_state pinstate; |
| 120 | |
| 121 | if (!dvs) |
| 122 | return; |
| 123 | |
| 124 | pinstate = dvs->vsel == DVS_SEL_V0 ? DVS_LOW : DVS_HIGH; |
| 125 | if (gpio_is_valid(dvs->gpio)) |
| 126 | gpio_set_value(dvs->gpio, pinstate); |
| 127 | } |
| 128 | |
| 129 | static void lp8788_buck2_set_dvs(struct lp8788_buck *buck) |
| 130 | { |
| 131 | struct lp8788_buck2_dvs *dvs = (struct lp8788_buck2_dvs *)buck->dvs; |
| 132 | enum lp8788_dvs_state pin1, pin2; |
| 133 | |
| 134 | if (!dvs) |
| 135 | return; |
| 136 | |
| 137 | switch (dvs->vsel) { |
| 138 | case DVS_SEL_V0: |
| 139 | pin1 = DVS_LOW; |
| 140 | pin2 = DVS_LOW; |
| 141 | break; |
| 142 | case DVS_SEL_V1: |
| 143 | pin1 = DVS_HIGH; |
| 144 | pin2 = DVS_LOW; |
| 145 | break; |
| 146 | case DVS_SEL_V2: |
| 147 | pin1 = DVS_LOW; |
| 148 | pin2 = DVS_HIGH; |
| 149 | break; |
| 150 | case DVS_SEL_V3: |
| 151 | pin1 = DVS_HIGH; |
| 152 | pin2 = DVS_HIGH; |
| 153 | break; |
| 154 | default: |
| 155 | return; |
| 156 | } |
| 157 | |
| 158 | if (gpio_is_valid(dvs->gpio[0])) |
| 159 | gpio_set_value(dvs->gpio[0], pin1); |
| 160 | |
| 161 | if (gpio_is_valid(dvs->gpio[1])) |
| 162 | gpio_set_value(dvs->gpio[1], pin2); |
| 163 | } |
| 164 | |
| 165 | static void lp8788_set_dvs(struct lp8788_buck *buck, enum lp8788_buck_id id) |
| 166 | { |
| 167 | switch (id) { |
| 168 | case BUCK1: |
| 169 | lp8788_buck1_set_dvs(buck); |
| 170 | break; |
| 171 | case BUCK2: |
| 172 | lp8788_buck2_set_dvs(buck); |
| 173 | break; |
| 174 | default: |
| 175 | break; |
| 176 | } |
| 177 | } |
| 178 | |
| 179 | static enum lp8788_dvs_mode |
| 180 | lp8788_get_buck_dvs_ctrl_mode(struct lp8788_buck *buck, enum lp8788_buck_id id) |
| 181 | { |
| 182 | u8 val, mask; |
| 183 | |
| 184 | switch (id) { |
| 185 | case BUCK1: |
| 186 | mask = LP8788_BUCK1_DVS_SEL_M; |
| 187 | break; |
| 188 | case BUCK2: |
| 189 | mask = LP8788_BUCK2_DVS_SEL_M; |
| 190 | break; |
| 191 | default: |
| 192 | return REGISTER; |
| 193 | } |
| 194 | |
| 195 | lp8788_read_byte(buck->lp, LP8788_BUCK_DVS_SEL, &val); |
| 196 | |
| 197 | return val & mask ? REGISTER : EXTPIN; |
| 198 | } |
| 199 | |
| 200 | static bool lp8788_is_valid_buck_addr(u8 addr) |
| 201 | { |
| 202 | switch (addr) { |
| 203 | case LP8788_BUCK1_VOUT0: |
| 204 | case LP8788_BUCK1_VOUT1: |
| 205 | case LP8788_BUCK1_VOUT2: |
| 206 | case LP8788_BUCK1_VOUT3: |
| 207 | case LP8788_BUCK2_VOUT0: |
| 208 | case LP8788_BUCK2_VOUT1: |
| 209 | case LP8788_BUCK2_VOUT2: |
| 210 | case LP8788_BUCK2_VOUT3: |
| 211 | return true; |
| 212 | default: |
| 213 | return false; |
| 214 | } |
| 215 | } |
| 216 | |
| 217 | static u8 lp8788_select_buck_vout_addr(struct lp8788_buck *buck, |
| 218 | enum lp8788_buck_id id) |
| 219 | { |
| 220 | enum lp8788_dvs_mode mode = lp8788_get_buck_dvs_ctrl_mode(buck, id); |
| 221 | struct lp8788_buck1_dvs *b1_dvs; |
| 222 | struct lp8788_buck2_dvs *b2_dvs; |
| 223 | u8 val, idx, addr; |
| 224 | int pin1, pin2; |
| 225 | |
| 226 | switch (id) { |
| 227 | case BUCK1: |
| 228 | if (mode == EXTPIN) { |
| 229 | b1_dvs = (struct lp8788_buck1_dvs *)buck->dvs; |
| 230 | if (!b1_dvs) |
| 231 | goto err; |
| 232 | |
| 233 | idx = gpio_get_value(b1_dvs->gpio) ? 1 : 0; |
| 234 | } else { |
| 235 | lp8788_read_byte(buck->lp, LP8788_BUCK_DVS_SEL, &val); |
| 236 | idx = (val & LP8788_BUCK1_DVS_M) >> LP8788_BUCK1_DVS_S; |
| 237 | } |
| 238 | addr = buck1_vout_addr[idx]; |
| 239 | break; |
| 240 | case BUCK2: |
| 241 | if (mode == EXTPIN) { |
| 242 | b2_dvs = (struct lp8788_buck2_dvs *)buck->dvs; |
| 243 | if (!b2_dvs) |
| 244 | goto err; |
| 245 | |
| 246 | pin1 = gpio_get_value(b2_dvs->gpio[0]); |
| 247 | pin2 = gpio_get_value(b2_dvs->gpio[1]); |
| 248 | |
| 249 | if (pin1 == PIN_LOW && pin2 == PIN_LOW) |
| 250 | idx = 0; |
| 251 | else if (pin1 == PIN_LOW && pin2 == PIN_HIGH) |
| 252 | idx = 2; |
| 253 | else if (pin1 == PIN_HIGH && pin2 == PIN_LOW) |
| 254 | idx = 1; |
| 255 | else |
| 256 | idx = 3; |
| 257 | } else { |
| 258 | lp8788_read_byte(buck->lp, LP8788_BUCK_DVS_SEL, &val); |
| 259 | idx = (val & LP8788_BUCK2_DVS_M) >> LP8788_BUCK2_DVS_S; |
| 260 | } |
| 261 | addr = buck2_vout_addr[idx]; |
| 262 | break; |
| 263 | default: |
| 264 | goto err; |
| 265 | } |
| 266 | |
| 267 | return addr; |
| 268 | err: |
| 269 | return INVALID_ADDR; |
| 270 | } |
| 271 | |
| 272 | static int lp8788_buck12_set_voltage_sel(struct regulator_dev *rdev, |
| 273 | unsigned selector) |
| 274 | { |
| 275 | struct lp8788_buck *buck = rdev_get_drvdata(rdev); |
| 276 | enum lp8788_buck_id id = rdev_get_id(rdev); |
| 277 | u8 addr; |
| 278 | |
| 279 | if (buck->dvs) |
| 280 | lp8788_set_dvs(buck, id); |
| 281 | |
| 282 | addr = lp8788_select_buck_vout_addr(buck, id); |
| 283 | if (!lp8788_is_valid_buck_addr(addr)) |
| 284 | return -EINVAL; |
| 285 | |
| 286 | return lp8788_update_bits(buck->lp, addr, LP8788_VOUT_M, selector); |
| 287 | } |
| 288 | |
| 289 | static int lp8788_buck12_get_voltage_sel(struct regulator_dev *rdev) |
| 290 | { |
| 291 | struct lp8788_buck *buck = rdev_get_drvdata(rdev); |
| 292 | enum lp8788_buck_id id = rdev_get_id(rdev); |
| 293 | int ret; |
| 294 | u8 val, addr; |
| 295 | |
| 296 | addr = lp8788_select_buck_vout_addr(buck, id); |
| 297 | if (!lp8788_is_valid_buck_addr(addr)) |
| 298 | return -EINVAL; |
| 299 | |
| 300 | ret = lp8788_read_byte(buck->lp, addr, &val); |
| 301 | if (ret) |
| 302 | return ret; |
| 303 | |
| 304 | return val & LP8788_VOUT_M; |
| 305 | } |
| 306 | |
| 307 | static int lp8788_buck_enable_time(struct regulator_dev *rdev) |
| 308 | { |
| 309 | struct lp8788_buck *buck = rdev_get_drvdata(rdev); |
| 310 | enum lp8788_buck_id id = rdev_get_id(rdev); |
| 311 | u8 val, addr = LP8788_BUCK1_TIMESTEP + id; |
| 312 | |
| 313 | if (lp8788_read_byte(buck->lp, addr, &val)) |
| 314 | return -EINVAL; |
| 315 | |
| 316 | val = (val & LP8788_STARTUP_TIME_M) >> LP8788_STARTUP_TIME_S; |
| 317 | |
| 318 | return ENABLE_TIME_USEC * val; |
| 319 | } |
| 320 | |
| 321 | static int lp8788_buck_set_mode(struct regulator_dev *rdev, unsigned int mode) |
| 322 | { |
| 323 | struct lp8788_buck *buck = rdev_get_drvdata(rdev); |
Axel Lin | 0f4c46d | 2012-07-20 23:10:55 +0800 | [diff] [blame] | 324 | enum lp8788_buck_id id = rdev_get_id(rdev); |
| 325 | u8 mask, val; |
Kim, Milo | ade7515 | 2012-07-18 14:32:57 +0000 | [diff] [blame] | 326 | |
Axel Lin | 0f4c46d | 2012-07-20 23:10:55 +0800 | [diff] [blame] | 327 | mask = BUCK_FPWM_MASK(id); |
Kim, Milo | ade7515 | 2012-07-18 14:32:57 +0000 | [diff] [blame] | 328 | switch (mode) { |
| 329 | case REGULATOR_MODE_FAST: |
Axel Lin | 0f4c46d | 2012-07-20 23:10:55 +0800 | [diff] [blame] | 330 | val = LP8788_FORCE_PWM << BUCK_FPWM_SHIFT(id); |
Kim, Milo | ade7515 | 2012-07-18 14:32:57 +0000 | [diff] [blame] | 331 | break; |
| 332 | case REGULATOR_MODE_NORMAL: |
Axel Lin | 0f4c46d | 2012-07-20 23:10:55 +0800 | [diff] [blame] | 333 | val = LP8788_AUTO_PWM << BUCK_FPWM_SHIFT(id); |
Kim, Milo | ade7515 | 2012-07-18 14:32:57 +0000 | [diff] [blame] | 334 | break; |
| 335 | default: |
| 336 | return -EINVAL; |
| 337 | } |
| 338 | |
Axel Lin | 0f4c46d | 2012-07-20 23:10:55 +0800 | [diff] [blame] | 339 | return lp8788_update_bits(buck->lp, LP8788_BUCK_PWM, mask, val); |
Kim, Milo | ade7515 | 2012-07-18 14:32:57 +0000 | [diff] [blame] | 340 | } |
| 341 | |
| 342 | static unsigned int lp8788_buck_get_mode(struct regulator_dev *rdev) |
| 343 | { |
| 344 | struct lp8788_buck *buck = rdev_get_drvdata(rdev); |
Axel Lin | 0f4c46d | 2012-07-20 23:10:55 +0800 | [diff] [blame] | 345 | enum lp8788_buck_id id = rdev_get_id(rdev); |
Kim, Milo | ade7515 | 2012-07-18 14:32:57 +0000 | [diff] [blame] | 346 | u8 val; |
| 347 | int ret; |
| 348 | |
Kim, Milo | ade7515 | 2012-07-18 14:32:57 +0000 | [diff] [blame] | 349 | ret = lp8788_read_byte(buck->lp, LP8788_BUCK_PWM, &val); |
| 350 | if (ret) |
| 351 | return ret; |
| 352 | |
Axel Lin | 0f4c46d | 2012-07-20 23:10:55 +0800 | [diff] [blame] | 353 | return val & BUCK_FPWM_MASK(id) ? |
| 354 | REGULATOR_MODE_FAST : REGULATOR_MODE_NORMAL; |
Kim, Milo | ade7515 | 2012-07-18 14:32:57 +0000 | [diff] [blame] | 355 | } |
| 356 | |
| 357 | static struct regulator_ops lp8788_buck12_ops = { |
| 358 | .list_voltage = regulator_list_voltage_table, |
| 359 | .set_voltage_sel = lp8788_buck12_set_voltage_sel, |
| 360 | .get_voltage_sel = lp8788_buck12_get_voltage_sel, |
| 361 | .enable = regulator_enable_regmap, |
| 362 | .disable = regulator_disable_regmap, |
| 363 | .is_enabled = regulator_is_enabled_regmap, |
| 364 | .enable_time = lp8788_buck_enable_time, |
| 365 | .set_mode = lp8788_buck_set_mode, |
| 366 | .get_mode = lp8788_buck_get_mode, |
| 367 | }; |
| 368 | |
| 369 | static struct regulator_ops lp8788_buck34_ops = { |
| 370 | .list_voltage = regulator_list_voltage_table, |
| 371 | .set_voltage_sel = regulator_set_voltage_sel_regmap, |
| 372 | .get_voltage_sel = regulator_get_voltage_sel_regmap, |
| 373 | .enable = regulator_enable_regmap, |
| 374 | .disable = regulator_disable_regmap, |
| 375 | .is_enabled = regulator_is_enabled_regmap, |
| 376 | .enable_time = lp8788_buck_enable_time, |
| 377 | .set_mode = lp8788_buck_set_mode, |
| 378 | .get_mode = lp8788_buck_get_mode, |
| 379 | }; |
| 380 | |
| 381 | static struct regulator_desc lp8788_buck_desc[] = { |
| 382 | { |
| 383 | .name = "buck1", |
| 384 | .id = BUCK1, |
| 385 | .ops = &lp8788_buck12_ops, |
| 386 | .n_voltages = ARRAY_SIZE(lp8788_buck_vtbl), |
| 387 | .volt_table = lp8788_buck_vtbl, |
| 388 | .type = REGULATOR_VOLTAGE, |
| 389 | .owner = THIS_MODULE, |
| 390 | .enable_reg = LP8788_EN_BUCK, |
| 391 | .enable_mask = LP8788_EN_BUCK1_M, |
| 392 | }, |
| 393 | { |
| 394 | .name = "buck2", |
| 395 | .id = BUCK2, |
| 396 | .ops = &lp8788_buck12_ops, |
| 397 | .n_voltages = ARRAY_SIZE(lp8788_buck_vtbl), |
| 398 | .volt_table = lp8788_buck_vtbl, |
| 399 | .type = REGULATOR_VOLTAGE, |
| 400 | .owner = THIS_MODULE, |
| 401 | .enable_reg = LP8788_EN_BUCK, |
| 402 | .enable_mask = LP8788_EN_BUCK2_M, |
| 403 | }, |
| 404 | { |
| 405 | .name = "buck3", |
| 406 | .id = BUCK3, |
| 407 | .ops = &lp8788_buck34_ops, |
| 408 | .n_voltages = ARRAY_SIZE(lp8788_buck_vtbl), |
| 409 | .volt_table = lp8788_buck_vtbl, |
| 410 | .type = REGULATOR_VOLTAGE, |
| 411 | .owner = THIS_MODULE, |
| 412 | .vsel_reg = LP8788_BUCK3_VOUT, |
| 413 | .vsel_mask = LP8788_VOUT_M, |
| 414 | .enable_reg = LP8788_EN_BUCK, |
| 415 | .enable_mask = LP8788_EN_BUCK3_M, |
| 416 | }, |
| 417 | { |
| 418 | .name = "buck4", |
| 419 | .id = BUCK4, |
| 420 | .ops = &lp8788_buck34_ops, |
| 421 | .n_voltages = ARRAY_SIZE(lp8788_buck_vtbl), |
| 422 | .volt_table = lp8788_buck_vtbl, |
| 423 | .type = REGULATOR_VOLTAGE, |
| 424 | .owner = THIS_MODULE, |
| 425 | .vsel_reg = LP8788_BUCK4_VOUT, |
| 426 | .vsel_mask = LP8788_VOUT_M, |
| 427 | .enable_reg = LP8788_EN_BUCK, |
| 428 | .enable_mask = LP8788_EN_BUCK4_M, |
| 429 | }, |
| 430 | }; |
| 431 | |
Kim, Milo | ade7515 | 2012-07-18 14:32:57 +0000 | [diff] [blame] | 432 | static int _gpio_request(struct lp8788_buck *buck, int gpio, char *name) |
| 433 | { |
| 434 | struct device *dev = buck->lp->dev; |
| 435 | |
| 436 | if (!gpio_is_valid(gpio)) { |
| 437 | dev_err(dev, "invalid gpio: %d\n", gpio); |
| 438 | return -EINVAL; |
| 439 | } |
| 440 | |
| 441 | return devm_gpio_request_one(dev, gpio, DVS_LOW, name); |
| 442 | } |
| 443 | |
| 444 | static int lp8788_dvs_gpio_request(struct lp8788_buck *buck, |
| 445 | enum lp8788_buck_id id) |
| 446 | { |
| 447 | struct lp8788_platform_data *pdata = buck->lp->pdata; |
| 448 | char *b1_name = "LP8788_B1_DVS"; |
| 449 | char *b2_name[] = { "LP8788_B2_DVS1", "LP8788_B2_DVS2" }; |
| 450 | int i, gpio, ret; |
| 451 | |
| 452 | switch (id) { |
| 453 | case BUCK1: |
| 454 | gpio = pdata->buck1_dvs->gpio; |
| 455 | ret = _gpio_request(buck, gpio, b1_name); |
| 456 | if (ret) |
| 457 | return ret; |
| 458 | |
| 459 | buck->dvs = pdata->buck1_dvs; |
| 460 | break; |
| 461 | case BUCK2: |
| 462 | for (i = 0 ; i < LP8788_NUM_BUCK2_DVS ; i++) { |
| 463 | gpio = pdata->buck2_dvs->gpio[i]; |
| 464 | ret = _gpio_request(buck, gpio, b2_name[i]); |
| 465 | if (ret) |
| 466 | return ret; |
| 467 | } |
| 468 | buck->dvs = pdata->buck2_dvs; |
| 469 | break; |
| 470 | default: |
| 471 | break; |
| 472 | } |
| 473 | |
| 474 | return 0; |
| 475 | } |
| 476 | |
| 477 | static int lp8788_init_dvs(struct lp8788_buck *buck, enum lp8788_buck_id id) |
| 478 | { |
| 479 | struct lp8788_platform_data *pdata = buck->lp->pdata; |
| 480 | u8 mask[] = { LP8788_BUCK1_DVS_SEL_M, LP8788_BUCK2_DVS_SEL_M }; |
| 481 | u8 val[] = { LP8788_BUCK1_DVS_PIN, LP8788_BUCK2_DVS_PIN }; |
Axel Lin | c42ea5c | 2012-07-20 22:22:20 +0800 | [diff] [blame] | 482 | u8 default_dvs_mode[] = { LP8788_BUCK1_DVS_I2C, LP8788_BUCK2_DVS_I2C }; |
Kim, Milo | ade7515 | 2012-07-18 14:32:57 +0000 | [diff] [blame] | 483 | |
| 484 | /* no dvs for buck3, 4 */ |
| 485 | if (id == BUCK3 || id == BUCK4) |
| 486 | return 0; |
| 487 | |
| 488 | /* no dvs platform data, then dvs will be selected by I2C registers */ |
| 489 | if (!pdata) |
| 490 | goto set_default_dvs_mode; |
| 491 | |
| 492 | if ((id == BUCK1 && !pdata->buck1_dvs) || |
| 493 | (id == BUCK2 && !pdata->buck2_dvs)) |
| 494 | goto set_default_dvs_mode; |
| 495 | |
| 496 | if (lp8788_dvs_gpio_request(buck, id)) |
| 497 | goto set_default_dvs_mode; |
| 498 | |
| 499 | return lp8788_update_bits(buck->lp, LP8788_BUCK_DVS_SEL, mask[id], |
| 500 | val[id]); |
| 501 | |
| 502 | set_default_dvs_mode: |
Axel Lin | c42ea5c | 2012-07-20 22:22:20 +0800 | [diff] [blame] | 503 | return lp8788_update_bits(buck->lp, LP8788_BUCK_DVS_SEL, mask[id], |
| 504 | default_dvs_mode[id]); |
Kim, Milo | ade7515 | 2012-07-18 14:32:57 +0000 | [diff] [blame] | 505 | } |
| 506 | |
| 507 | static __devinit int lp8788_buck_probe(struct platform_device *pdev) |
| 508 | { |
| 509 | struct lp8788 *lp = dev_get_drvdata(pdev->dev.parent); |
| 510 | int id = pdev->id; |
| 511 | struct lp8788_buck *buck; |
| 512 | struct regulator_config cfg = { }; |
| 513 | struct regulator_dev *rdev; |
| 514 | int ret; |
| 515 | |
| 516 | buck = devm_kzalloc(lp->dev, sizeof(struct lp8788_buck), GFP_KERNEL); |
| 517 | if (!buck) |
| 518 | return -ENOMEM; |
| 519 | |
| 520 | buck->lp = lp; |
Kim, Milo | ade7515 | 2012-07-18 14:32:57 +0000 | [diff] [blame] | 521 | |
| 522 | ret = lp8788_init_dvs(buck, id); |
| 523 | if (ret) |
| 524 | return ret; |
| 525 | |
| 526 | cfg.dev = lp->dev; |
| 527 | cfg.init_data = lp->pdata ? lp->pdata->buck_data[id] : NULL; |
| 528 | cfg.driver_data = buck; |
| 529 | cfg.regmap = lp->regmap; |
| 530 | |
| 531 | rdev = regulator_register(&lp8788_buck_desc[id], &cfg); |
| 532 | if (IS_ERR(rdev)) { |
| 533 | ret = PTR_ERR(rdev); |
| 534 | dev_err(lp->dev, "BUCK%d regulator register err = %d\n", |
| 535 | id + 1, ret); |
| 536 | return ret; |
| 537 | } |
| 538 | |
| 539 | buck->regulator = rdev; |
| 540 | platform_set_drvdata(pdev, buck); |
| 541 | |
| 542 | return 0; |
| 543 | } |
| 544 | |
| 545 | static int __devexit lp8788_buck_remove(struct platform_device *pdev) |
| 546 | { |
| 547 | struct lp8788_buck *buck = platform_get_drvdata(pdev); |
| 548 | |
| 549 | platform_set_drvdata(pdev, NULL); |
| 550 | regulator_unregister(buck->regulator); |
| 551 | |
| 552 | return 0; |
| 553 | } |
| 554 | |
| 555 | static struct platform_driver lp8788_buck_driver = { |
| 556 | .probe = lp8788_buck_probe, |
| 557 | .remove = __devexit_p(lp8788_buck_remove), |
| 558 | .driver = { |
| 559 | .name = LP8788_DEV_BUCK, |
| 560 | .owner = THIS_MODULE, |
| 561 | }, |
| 562 | }; |
| 563 | |
| 564 | static int __init lp8788_buck_init(void) |
| 565 | { |
| 566 | return platform_driver_register(&lp8788_buck_driver); |
| 567 | } |
| 568 | subsys_initcall(lp8788_buck_init); |
| 569 | |
| 570 | static void __exit lp8788_buck_exit(void) |
| 571 | { |
| 572 | platform_driver_unregister(&lp8788_buck_driver); |
| 573 | } |
| 574 | module_exit(lp8788_buck_exit); |
| 575 | |
| 576 | MODULE_DESCRIPTION("TI LP8788 BUCK Driver"); |
| 577 | MODULE_AUTHOR("Milo Kim"); |
| 578 | MODULE_LICENSE("GPL"); |
| 579 | MODULE_ALIAS("platform:lp8788-buck"); |