blob: 9ff459bd38b3b649a94cadad9e9cb027c3fd738b [file] [log] [blame]
Maxime Ripard82abe522013-07-25 12:19:16 +02001/*
2 * Copyright 2013 Maxime Ripard
3 *
4 * Maxime Ripard <maxime.ripard@free-electrons.com>
5 *
Maxime Ripard774c5842014-09-02 19:25:26 +02006 * This file is dual-licensed: you can use it either under the terms
7 * of the GPL or the X11 license, at your option. Note that this dual
8 * licensing only applies to this file, and not this project as a
9 * whole.
Maxime Ripard82abe522013-07-25 12:19:16 +020010 *
Maxime Ripard774c5842014-09-02 19:25:26 +020011 * a) This file is free software; you can redistribute it and/or
12 * modify it under the terms of the GNU General Public License as
13 * published by the Free Software Foundation; either version 2 of the
14 * License, or (at your option) any later version.
15 *
16 * This file is distributed in the hope that it will be useful,
17 * but WITHOUT ANY WARRANTY; without even the implied warranty of
18 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
19 * GNU General Public License for more details.
20 *
Maxime Ripard774c5842014-09-02 19:25:26 +020021 * Or, alternatively,
22 *
23 * b) Permission is hereby granted, free of charge, to any person
24 * obtaining a copy of this software and associated documentation
25 * files (the "Software"), to deal in the Software without
26 * restriction, including without limitation the rights to use,
27 * copy, modify, merge, publish, distribute, sublicense, and/or
28 * sell copies of the Software, and to permit persons to whom the
29 * Software is furnished to do so, subject to the following
30 * conditions:
31 *
32 * The above copyright notice and this permission notice shall be
33 * included in all copies or substantial portions of the Software.
34 *
35 * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
36 * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
37 * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
38 * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
39 * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
40 * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
41 * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
42 * OTHER DEALINGS IN THE SOFTWARE.
Maxime Ripard82abe522013-07-25 12:19:16 +020043 */
44
45/dts-v1/;
Maxime Ripard71455702014-12-16 22:59:54 +010046#include "sun7i-a20.dtsi"
47#include "sunxi-common-regulators.dtsi"
Maxime Ripard82abe522013-07-25 12:19:16 +020048
Maxime Ripardbca12922014-12-16 22:59:55 +010049#include <dt-bindings/gpio/gpio.h>
Maxime Riparda6bac9e2014-12-16 22:59:59 +010050#include <dt-bindings/interrupt-controller/irq.h>
Maxime Ripard092a0c32014-12-16 22:59:57 +010051#include <dt-bindings/pinctrl/sun4i-a10.h>
Maxime Ripardbca12922014-12-16 22:59:55 +010052
Maxime Ripard82abe522013-07-25 12:19:16 +020053/ {
54 model = "Cubietech Cubieboard2";
55 compatible = "cubietech,cubieboard2", "allwinner,sun7i-a20";
56
Maxime Ripard59ebbe82015-03-15 20:47:31 +010057 aliases {
58 serial0 = &uart0;
59 };
60
61 chosen {
62 stdout-path = "serial0:115200n8";
63 };
64
Maxime Ripard82abe522013-07-25 12:19:16 +020065 leds {
66 compatible = "gpio-leds";
67 pinctrl-names = "default";
68 pinctrl-0 = <&led_pins_cubieboard2>;
69
70 blue {
71 label = "cubieboard2:blue:usr";
Maxime Ripardbca12922014-12-16 22:59:55 +010072 gpios = <&pio 7 21 GPIO_ACTIVE_HIGH>;
Maxime Ripard82abe522013-07-25 12:19:16 +020073 };
74
75 green {
76 label = "cubieboard2:green:usr";
Maxime Ripardbca12922014-12-16 22:59:55 +010077 gpios = <&pio 7 20 GPIO_ACTIVE_HIGH>;
Maxime Ripard82abe522013-07-25 12:19:16 +020078 };
79 };
Maxime Ripard82abe522013-07-25 12:19:16 +020080};
Chen-Yu Tsaiae265c82015-01-12 12:34:04 +080081
Maxime Ripardb5ec9932015-01-31 12:11:54 +010082&ahci {
83 target-supply = <&reg_ahci_5v>;
84 status = "okay";
85};
Chen-Yu Tsaiae265c82015-01-12 12:34:04 +080086
87&cpu0 {
88 cpu-supply = <&reg_dcdc2>;
89};
90
Maxime Ripardb5ec9932015-01-31 12:11:54 +010091&ehci0 {
92 status = "okay";
93};
94
95&ehci1 {
96 status = "okay";
97};
98
99&gmac {
100 pinctrl-names = "default";
101 pinctrl-0 = <&gmac_pins_mii_a>;
102 phy = <&phy1>;
103 phy-mode = "mii";
104 status = "okay";
105
106 phy1: ethernet-phy@1 {
107 reg = <1>;
108 };
109};
110
111&i2c0 {
112 pinctrl-names = "default";
113 pinctrl-0 = <&i2c0_pins_a>;
114 status = "okay";
115
116 axp209: pmic@34 {
117 reg = <0x34>;
118 interrupt-parent = <&nmi_intc>;
119 interrupts = <0 IRQ_TYPE_LEVEL_LOW>;
120 };
121};
122
123&i2c1 {
124 pinctrl-names = "default";
125 pinctrl-0 = <&i2c1_pins_a>;
126 status = "okay";
127};
128
129&ir0 {
130 pinctrl-names = "default";
Marcus Cooper469a22e2015-05-02 13:36:20 +0200131 pinctrl-0 = <&ir0_rx_pins_a>;
Maxime Ripardb5ec9932015-01-31 12:11:54 +0100132 status = "okay";
133};
134
135&mmc0 {
136 pinctrl-names = "default";
137 pinctrl-0 = <&mmc0_pins_a>, <&mmc0_cd_pin_reference_design>;
138 vmmc-supply = <&reg_vcc3v3>;
139 bus-width = <4>;
140 cd-gpios = <&pio 7 1 GPIO_ACTIVE_HIGH>; /* PH1 */
141 cd-inverted;
142 status = "okay";
143};
144
145&ohci0 {
146 status = "okay";
147};
148
149&ohci1 {
150 status = "okay";
151};
152
Ralph Benadskib8962f72015-08-14 16:44:36 +0200153&otg_sram {
154 status = "okay";
155};
156
Maxime Ripardb5ec9932015-01-31 12:11:54 +0100157&pio {
158 led_pins_cubieboard2: led_pins@0 {
159 allwinner,pins = "PH20", "PH21";
160 allwinner,function = "gpio_out";
161 allwinner,drive = <SUN4I_PINCTRL_10_MA>;
162 allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
163 };
Ralph Benadskib8962f72015-08-14 16:44:36 +0200164
165 usb0_id_detect_pin: usb0_id_detect_pin@0 {
166 allwinner,pins = "PH4";
167 allwinner,function = "gpio_in";
168 allwinner,drive = <SUN4I_PINCTRL_10_MA>;
169 allwinner,pull = <SUN4I_PINCTRL_PULL_UP>;
170 };
Maxime Ripardb5ec9932015-01-31 12:11:54 +0100171};
172
173&reg_ahci_5v {
174 status = "okay";
175};
176
Ralph Benadskib8962f72015-08-14 16:44:36 +0200177&usb_otg {
178 dr_mode = "otg";
179 status = "okay";
180};
181
Maxime Ripardb5ec9932015-01-31 12:11:54 +0100182#include "axp209.dtsi"
183
Chen-Yu Tsaiae265c82015-01-12 12:34:04 +0800184&reg_dcdc2 {
185 regulator-always-on;
186 regulator-min-microvolt = <1000000>;
187 regulator-max-microvolt = <1450000>;
188 regulator-name = "vdd-cpu";
189};
190
191&reg_dcdc3 {
192 regulator-always-on;
193 regulator-min-microvolt = <1000000>;
194 regulator-max-microvolt = <1400000>;
195 regulator-name = "vdd-int-dll";
196};
197
198&reg_ldo1 {
199 regulator-name = "vdd-rtc";
200};
201
202&reg_ldo2 {
203 regulator-always-on;
204 regulator-min-microvolt = <3000000>;
205 regulator-max-microvolt = <3000000>;
206 regulator-name = "avcc";
207};
Maxime Ripardb5ec9932015-01-31 12:11:54 +0100208
209&reg_usb1_vbus {
210 status = "okay";
211};
212
213&reg_usb2_vbus {
214 status = "okay";
215};
216
217&uart0 {
218 pinctrl-names = "default";
219 pinctrl-0 = <&uart0_pins_a>;
220 status = "okay";
221};
222
223&usbphy {
Ralph Benadskib8962f72015-08-14 16:44:36 +0200224 pinctrl-names = "default";
225 pinctrl-0 = <&usb0_id_detect_pin>;
226 usb0_id_det-gpio = <&pio 7 4 GPIO_ACTIVE_HIGH>; /* PH4 */
Maxime Ripardb5ec9932015-01-31 12:11:54 +0100227 usb1_vbus-supply = <&reg_usb1_vbus>;
228 usb2_vbus-supply = <&reg_usb2_vbus>;
229 status = "okay";
230};