Bjorn Andersson | b4c45fe | 2015-07-14 23:40:35 -0700 | [diff] [blame] | 1 | /* |
| 2 | * Copyright (c) 2015, Sony Mobile Communications AB. |
| 3 | * Copyright (c) 2013, The Linux Foundation. All rights reserved. |
| 4 | * |
| 5 | * This program is free software; you can redistribute it and/or modify |
| 6 | * it under the terms of the GNU General Public License version 2 and |
| 7 | * only version 2 as published by the Free Software Foundation. |
| 8 | * |
| 9 | * This program is distributed in the hope that it will be useful, |
| 10 | * but WITHOUT ANY WARRANTY; without even the implied warranty of |
| 11 | * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the |
| 12 | * GNU General Public License for more details. |
| 13 | */ |
| 14 | |
| 15 | #include <linux/module.h> |
| 16 | #include <linux/platform_device.h> |
| 17 | #include <linux/pinctrl/pinctrl.h> |
| 18 | #include <linux/pinctrl/pinmux.h> |
| 19 | #include <linux/pinctrl/pinconf.h> |
| 20 | #include <linux/pinctrl/pinconf-generic.h> |
| 21 | #include <linux/slab.h> |
| 22 | #include <linux/regmap.h> |
| 23 | #include <linux/gpio.h> |
| 24 | #include <linux/interrupt.h> |
| 25 | #include <linux/of_device.h> |
| 26 | |
| 27 | #include <dt-bindings/pinctrl/qcom,pmic-mpp.h> |
| 28 | |
| 29 | #include "../core.h" |
| 30 | #include "../pinctrl-utils.h" |
| 31 | |
| 32 | /* MPP registers */ |
| 33 | #define SSBI_REG_ADDR_MPP_BASE 0x50 |
| 34 | #define SSBI_REG_ADDR_MPP(n) (SSBI_REG_ADDR_MPP_BASE + n) |
| 35 | |
| 36 | /* MPP Type: type */ |
| 37 | #define PM8XXX_MPP_TYPE_D_INPUT 0 |
| 38 | #define PM8XXX_MPP_TYPE_D_OUTPUT 1 |
| 39 | #define PM8XXX_MPP_TYPE_D_BI_DIR 2 |
| 40 | #define PM8XXX_MPP_TYPE_A_INPUT 3 |
| 41 | #define PM8XXX_MPP_TYPE_A_OUTPUT 4 |
| 42 | #define PM8XXX_MPP_TYPE_SINK 5 |
| 43 | #define PM8XXX_MPP_TYPE_DTEST_SINK 6 |
| 44 | #define PM8XXX_MPP_TYPE_DTEST_OUTPUT 7 |
| 45 | |
| 46 | /* Digital Input: control */ |
| 47 | #define PM8XXX_MPP_DIN_TO_INT 0 |
| 48 | #define PM8XXX_MPP_DIN_TO_DBUS1 1 |
| 49 | #define PM8XXX_MPP_DIN_TO_DBUS2 2 |
| 50 | #define PM8XXX_MPP_DIN_TO_DBUS3 3 |
| 51 | |
| 52 | /* Digital Output: control */ |
| 53 | #define PM8XXX_MPP_DOUT_CTRL_LOW 0 |
| 54 | #define PM8XXX_MPP_DOUT_CTRL_HIGH 1 |
| 55 | #define PM8XXX_MPP_DOUT_CTRL_MPP 2 |
| 56 | #define PM8XXX_MPP_DOUT_CTRL_INV_MPP 3 |
| 57 | |
| 58 | /* Bidirectional: control */ |
| 59 | #define PM8XXX_MPP_BI_PULLUP_1KOHM 0 |
| 60 | #define PM8XXX_MPP_BI_PULLUP_OPEN 1 |
| 61 | #define PM8XXX_MPP_BI_PULLUP_10KOHM 2 |
| 62 | #define PM8XXX_MPP_BI_PULLUP_30KOHM 3 |
| 63 | |
| 64 | /* Analog Output: control */ |
| 65 | #define PM8XXX_MPP_AOUT_CTRL_DISABLE 0 |
| 66 | #define PM8XXX_MPP_AOUT_CTRL_ENABLE 1 |
| 67 | #define PM8XXX_MPP_AOUT_CTRL_MPP_HIGH_EN 2 |
| 68 | #define PM8XXX_MPP_AOUT_CTRL_MPP_LOW_EN 3 |
| 69 | |
| 70 | /* Current Sink: control */ |
| 71 | #define PM8XXX_MPP_CS_CTRL_DISABLE 0 |
| 72 | #define PM8XXX_MPP_CS_CTRL_ENABLE 1 |
| 73 | #define PM8XXX_MPP_CS_CTRL_MPP_HIGH_EN 2 |
| 74 | #define PM8XXX_MPP_CS_CTRL_MPP_LOW_EN 3 |
| 75 | |
| 76 | /* DTEST Current Sink: control */ |
| 77 | #define PM8XXX_MPP_DTEST_CS_CTRL_EN1 0 |
| 78 | #define PM8XXX_MPP_DTEST_CS_CTRL_EN2 1 |
| 79 | #define PM8XXX_MPP_DTEST_CS_CTRL_EN3 2 |
| 80 | #define PM8XXX_MPP_DTEST_CS_CTRL_EN4 3 |
| 81 | |
| 82 | /* DTEST Digital Output: control */ |
| 83 | #define PM8XXX_MPP_DTEST_DBUS1 0 |
| 84 | #define PM8XXX_MPP_DTEST_DBUS2 1 |
| 85 | #define PM8XXX_MPP_DTEST_DBUS3 2 |
| 86 | #define PM8XXX_MPP_DTEST_DBUS4 3 |
| 87 | |
| 88 | /* custom pinconf parameters */ |
| 89 | #define PM8XXX_CONFIG_AMUX (PIN_CONFIG_END + 1) |
| 90 | #define PM8XXX_CONFIG_DTEST_SELECTOR (PIN_CONFIG_END + 2) |
| 91 | #define PM8XXX_CONFIG_ALEVEL (PIN_CONFIG_END + 3) |
| 92 | #define PM8XXX_CONFIG_PAIRED (PIN_CONFIG_END + 4) |
| 93 | |
| 94 | /** |
| 95 | * struct pm8xxx_pin_data - dynamic configuration for a pin |
| 96 | * @reg: address of the control register |
| 97 | * @irq: IRQ from the PMIC interrupt controller |
| 98 | * @mode: operating mode for the pin (digital, analog or current sink) |
| 99 | * @input: pin is input |
| 100 | * @output: pin is output |
| 101 | * @high_z: pin is floating |
| 102 | * @paired: mpp operates in paired mode |
| 103 | * @output_value: logical output value of the mpp |
| 104 | * @power_source: selected power source |
| 105 | * @dtest: DTEST route selector |
| 106 | * @amux: input muxing in analog mode |
| 107 | * @aout_level: selector of the output in analog mode |
| 108 | * @drive_strength: drive strength of the current sink |
| 109 | * @pullup: pull up value, when in digital bidirectional mode |
| 110 | */ |
| 111 | struct pm8xxx_pin_data { |
| 112 | unsigned reg; |
| 113 | int irq; |
| 114 | |
| 115 | u8 mode; |
| 116 | |
| 117 | bool input; |
| 118 | bool output; |
| 119 | bool high_z; |
| 120 | bool paired; |
| 121 | bool output_value; |
| 122 | |
| 123 | u8 power_source; |
| 124 | u8 dtest; |
| 125 | u8 amux; |
| 126 | u8 aout_level; |
| 127 | u8 drive_strength; |
| 128 | unsigned pullup; |
| 129 | }; |
| 130 | |
| 131 | struct pm8xxx_mpp { |
| 132 | struct device *dev; |
| 133 | struct regmap *regmap; |
| 134 | struct pinctrl_dev *pctrl; |
| 135 | struct gpio_chip chip; |
| 136 | |
| 137 | struct pinctrl_desc desc; |
| 138 | unsigned npins; |
| 139 | }; |
| 140 | |
| 141 | static const struct pinconf_generic_params pm8xxx_mpp_bindings[] = { |
| 142 | {"qcom,amux-route", PM8XXX_CONFIG_AMUX, 0}, |
| 143 | {"qcom,analog-level", PM8XXX_CONFIG_ALEVEL, 0}, |
| 144 | {"qcom,dtest", PM8XXX_CONFIG_DTEST_SELECTOR, 0}, |
| 145 | {"qcom,paired", PM8XXX_CONFIG_PAIRED, 0}, |
| 146 | }; |
| 147 | |
| 148 | #ifdef CONFIG_DEBUG_FS |
| 149 | static const struct pin_config_item pm8xxx_conf_items[] = { |
| 150 | PCONFDUMP(PM8XXX_CONFIG_AMUX, "analog mux", NULL, true), |
| 151 | PCONFDUMP(PM8XXX_CONFIG_ALEVEL, "analog level", NULL, true), |
| 152 | PCONFDUMP(PM8XXX_CONFIG_DTEST_SELECTOR, "dtest", NULL, true), |
| 153 | PCONFDUMP(PM8XXX_CONFIG_PAIRED, "paired", NULL, false), |
| 154 | }; |
| 155 | #endif |
| 156 | |
| 157 | #define PM8XXX_MAX_MPPS 12 |
| 158 | static const char * const pm8xxx_groups[PM8XXX_MAX_MPPS] = { |
| 159 | "mpp1", "mpp2", "mpp3", "mpp4", "mpp5", "mpp6", "mpp7", "mpp8", |
| 160 | "mpp9", "mpp10", "mpp11", "mpp12", |
| 161 | }; |
| 162 | |
| 163 | #define PM8XXX_MPP_DIGITAL 0 |
| 164 | #define PM8XXX_MPP_ANALOG 1 |
| 165 | #define PM8XXX_MPP_SINK 2 |
| 166 | |
| 167 | static const char * const pm8xxx_mpp_functions[] = { |
| 168 | "digital", "analog", "sink", |
| 169 | }; |
| 170 | |
| 171 | static int pm8xxx_mpp_update(struct pm8xxx_mpp *pctrl, |
| 172 | struct pm8xxx_pin_data *pin) |
| 173 | { |
| 174 | unsigned level; |
| 175 | unsigned ctrl; |
| 176 | unsigned type; |
| 177 | int ret; |
| 178 | u8 val; |
| 179 | |
| 180 | switch (pin->mode) { |
| 181 | case PM8XXX_MPP_DIGITAL: |
| 182 | if (pin->dtest) { |
| 183 | type = PM8XXX_MPP_TYPE_DTEST_OUTPUT; |
| 184 | ctrl = pin->dtest - 1; |
| 185 | } else if (pin->input && pin->output) { |
| 186 | type = PM8XXX_MPP_TYPE_D_BI_DIR; |
| 187 | if (pin->high_z) |
| 188 | ctrl = PM8XXX_MPP_BI_PULLUP_OPEN; |
| 189 | else if (pin->pullup == 600) |
| 190 | ctrl = PM8XXX_MPP_BI_PULLUP_1KOHM; |
| 191 | else if (pin->pullup == 10000) |
| 192 | ctrl = PM8XXX_MPP_BI_PULLUP_10KOHM; |
| 193 | else |
| 194 | ctrl = PM8XXX_MPP_BI_PULLUP_30KOHM; |
| 195 | } else if (pin->input) { |
| 196 | type = PM8XXX_MPP_TYPE_D_INPUT; |
| 197 | if (pin->dtest) |
| 198 | ctrl = pin->dtest; |
| 199 | else |
| 200 | ctrl = PM8XXX_MPP_DIN_TO_INT; |
| 201 | } else { |
| 202 | type = PM8XXX_MPP_TYPE_D_OUTPUT; |
| 203 | ctrl = !!pin->output_value; |
| 204 | if (pin->paired) |
| 205 | ctrl |= BIT(1); |
| 206 | } |
| 207 | |
| 208 | level = pin->power_source; |
| 209 | break; |
| 210 | case PM8XXX_MPP_ANALOG: |
| 211 | if (pin->output) { |
| 212 | type = PM8XXX_MPP_TYPE_A_OUTPUT; |
| 213 | level = pin->aout_level; |
| 214 | ctrl = pin->output_value; |
| 215 | if (pin->paired) |
| 216 | ctrl |= BIT(1); |
| 217 | } else { |
| 218 | type = PM8XXX_MPP_TYPE_A_INPUT; |
| 219 | level = pin->amux; |
| 220 | ctrl = 0; |
| 221 | } |
| 222 | break; |
| 223 | case PM8XXX_MPP_SINK: |
| 224 | level = (pin->drive_strength / 5) - 1; |
| 225 | if (pin->dtest) { |
| 226 | type = PM8XXX_MPP_TYPE_DTEST_SINK; |
| 227 | ctrl = pin->dtest - 1; |
| 228 | } else { |
| 229 | type = PM8XXX_MPP_TYPE_SINK; |
| 230 | ctrl = pin->output_value; |
| 231 | if (pin->paired) |
| 232 | ctrl |= BIT(1); |
| 233 | } |
| 234 | break; |
| 235 | default: |
| 236 | return -EINVAL; |
| 237 | } |
| 238 | |
| 239 | val = type << 5 | level << 2 | ctrl; |
| 240 | ret = regmap_write(pctrl->regmap, pin->reg, val); |
| 241 | if (ret) |
| 242 | dev_err(pctrl->dev, "failed to write register\n"); |
| 243 | |
| 244 | return ret; |
| 245 | } |
| 246 | |
| 247 | static int pm8xxx_get_groups_count(struct pinctrl_dev *pctldev) |
| 248 | { |
| 249 | struct pm8xxx_mpp *pctrl = pinctrl_dev_get_drvdata(pctldev); |
| 250 | |
| 251 | return pctrl->npins; |
| 252 | } |
| 253 | |
| 254 | static const char *pm8xxx_get_group_name(struct pinctrl_dev *pctldev, |
| 255 | unsigned group) |
| 256 | { |
| 257 | return pm8xxx_groups[group]; |
| 258 | } |
| 259 | |
| 260 | |
| 261 | static int pm8xxx_get_group_pins(struct pinctrl_dev *pctldev, |
| 262 | unsigned group, |
| 263 | const unsigned **pins, |
| 264 | unsigned *num_pins) |
| 265 | { |
| 266 | struct pm8xxx_mpp *pctrl = pinctrl_dev_get_drvdata(pctldev); |
| 267 | |
| 268 | *pins = &pctrl->desc.pins[group].number; |
| 269 | *num_pins = 1; |
| 270 | |
| 271 | return 0; |
| 272 | } |
| 273 | |
| 274 | static const struct pinctrl_ops pm8xxx_pinctrl_ops = { |
| 275 | .get_groups_count = pm8xxx_get_groups_count, |
| 276 | .get_group_name = pm8xxx_get_group_name, |
| 277 | .get_group_pins = pm8xxx_get_group_pins, |
| 278 | .dt_node_to_map = pinconf_generic_dt_node_to_map_group, |
| 279 | .dt_free_map = pinctrl_utils_dt_free_map, |
| 280 | }; |
| 281 | |
| 282 | static int pm8xxx_get_functions_count(struct pinctrl_dev *pctldev) |
| 283 | { |
| 284 | return ARRAY_SIZE(pm8xxx_mpp_functions); |
| 285 | } |
| 286 | |
| 287 | static const char *pm8xxx_get_function_name(struct pinctrl_dev *pctldev, |
| 288 | unsigned function) |
| 289 | { |
| 290 | return pm8xxx_mpp_functions[function]; |
| 291 | } |
| 292 | |
| 293 | static int pm8xxx_get_function_groups(struct pinctrl_dev *pctldev, |
| 294 | unsigned function, |
| 295 | const char * const **groups, |
| 296 | unsigned * const num_groups) |
| 297 | { |
| 298 | struct pm8xxx_mpp *pctrl = pinctrl_dev_get_drvdata(pctldev); |
| 299 | |
| 300 | *groups = pm8xxx_groups; |
| 301 | *num_groups = pctrl->npins; |
| 302 | return 0; |
| 303 | } |
| 304 | |
| 305 | static int pm8xxx_pinmux_set_mux(struct pinctrl_dev *pctldev, |
| 306 | unsigned function, |
| 307 | unsigned group) |
| 308 | { |
| 309 | struct pm8xxx_mpp *pctrl = pinctrl_dev_get_drvdata(pctldev); |
| 310 | struct pm8xxx_pin_data *pin = pctrl->desc.pins[group].drv_data; |
| 311 | |
| 312 | pin->mode = function; |
| 313 | pm8xxx_mpp_update(pctrl, pin); |
| 314 | |
| 315 | return 0; |
| 316 | } |
| 317 | |
| 318 | static const struct pinmux_ops pm8xxx_pinmux_ops = { |
| 319 | .get_functions_count = pm8xxx_get_functions_count, |
| 320 | .get_function_name = pm8xxx_get_function_name, |
| 321 | .get_function_groups = pm8xxx_get_function_groups, |
| 322 | .set_mux = pm8xxx_pinmux_set_mux, |
| 323 | }; |
| 324 | |
| 325 | static int pm8xxx_pin_config_get(struct pinctrl_dev *pctldev, |
| 326 | unsigned int offset, |
| 327 | unsigned long *config) |
| 328 | { |
| 329 | struct pm8xxx_mpp *pctrl = pinctrl_dev_get_drvdata(pctldev); |
| 330 | struct pm8xxx_pin_data *pin = pctrl->desc.pins[offset].drv_data; |
| 331 | unsigned param = pinconf_to_config_param(*config); |
| 332 | unsigned arg; |
| 333 | |
| 334 | switch (param) { |
| 335 | case PIN_CONFIG_BIAS_PULL_UP: |
| 336 | arg = pin->pullup; |
| 337 | break; |
| 338 | case PIN_CONFIG_BIAS_HIGH_IMPEDANCE: |
| 339 | arg = pin->high_z; |
| 340 | break; |
| 341 | case PIN_CONFIG_INPUT_ENABLE: |
| 342 | arg = pin->input; |
| 343 | break; |
| 344 | case PIN_CONFIG_OUTPUT: |
| 345 | arg = pin->output_value; |
| 346 | break; |
| 347 | case PIN_CONFIG_POWER_SOURCE: |
| 348 | arg = pin->power_source; |
| 349 | break; |
| 350 | case PIN_CONFIG_DRIVE_STRENGTH: |
| 351 | arg = pin->drive_strength; |
| 352 | break; |
| 353 | case PM8XXX_CONFIG_DTEST_SELECTOR: |
| 354 | arg = pin->dtest; |
| 355 | break; |
| 356 | case PM8XXX_CONFIG_AMUX: |
| 357 | arg = pin->amux; |
| 358 | break; |
| 359 | case PM8XXX_CONFIG_ALEVEL: |
| 360 | arg = pin->aout_level; |
| 361 | break; |
| 362 | case PM8XXX_CONFIG_PAIRED: |
| 363 | arg = pin->paired; |
| 364 | break; |
| 365 | default: |
| 366 | return -EINVAL; |
| 367 | } |
| 368 | |
| 369 | *config = pinconf_to_config_packed(param, arg); |
| 370 | |
| 371 | return 0; |
| 372 | } |
| 373 | |
| 374 | static int pm8xxx_pin_config_set(struct pinctrl_dev *pctldev, |
| 375 | unsigned int offset, |
| 376 | unsigned long *configs, |
| 377 | unsigned num_configs) |
| 378 | { |
| 379 | struct pm8xxx_mpp *pctrl = pinctrl_dev_get_drvdata(pctldev); |
| 380 | struct pm8xxx_pin_data *pin = pctrl->desc.pins[offset].drv_data; |
| 381 | unsigned param; |
| 382 | unsigned arg; |
| 383 | unsigned i; |
| 384 | |
| 385 | for (i = 0; i < num_configs; i++) { |
| 386 | param = pinconf_to_config_param(configs[i]); |
| 387 | arg = pinconf_to_config_argument(configs[i]); |
| 388 | |
| 389 | switch (param) { |
| 390 | case PIN_CONFIG_BIAS_PULL_UP: |
| 391 | pin->pullup = arg; |
| 392 | break; |
| 393 | case PIN_CONFIG_BIAS_HIGH_IMPEDANCE: |
| 394 | pin->high_z = true; |
| 395 | break; |
| 396 | case PIN_CONFIG_INPUT_ENABLE: |
| 397 | pin->input = true; |
| 398 | break; |
| 399 | case PIN_CONFIG_OUTPUT: |
| 400 | pin->output = true; |
| 401 | pin->output_value = !!arg; |
| 402 | break; |
| 403 | case PIN_CONFIG_POWER_SOURCE: |
| 404 | pin->power_source = arg; |
| 405 | break; |
| 406 | case PIN_CONFIG_DRIVE_STRENGTH: |
| 407 | pin->drive_strength = arg; |
| 408 | break; |
| 409 | case PM8XXX_CONFIG_DTEST_SELECTOR: |
| 410 | pin->dtest = arg; |
| 411 | break; |
| 412 | case PM8XXX_CONFIG_AMUX: |
| 413 | pin->amux = arg; |
| 414 | break; |
| 415 | case PM8XXX_CONFIG_ALEVEL: |
| 416 | pin->aout_level = arg; |
| 417 | break; |
| 418 | case PM8XXX_CONFIG_PAIRED: |
| 419 | pin->paired = !!arg; |
| 420 | break; |
| 421 | default: |
| 422 | dev_err(pctrl->dev, |
| 423 | "unsupported config parameter: %x\n", |
| 424 | param); |
| 425 | return -EINVAL; |
| 426 | } |
| 427 | } |
| 428 | |
| 429 | pm8xxx_mpp_update(pctrl, pin); |
| 430 | |
| 431 | return 0; |
| 432 | } |
| 433 | |
| 434 | static const struct pinconf_ops pm8xxx_pinconf_ops = { |
| 435 | .is_generic = true, |
| 436 | .pin_config_group_get = pm8xxx_pin_config_get, |
| 437 | .pin_config_group_set = pm8xxx_pin_config_set, |
| 438 | }; |
| 439 | |
| 440 | static struct pinctrl_desc pm8xxx_pinctrl_desc = { |
| 441 | .name = "pm8xxx_mpp", |
| 442 | .pctlops = &pm8xxx_pinctrl_ops, |
| 443 | .pmxops = &pm8xxx_pinmux_ops, |
| 444 | .confops = &pm8xxx_pinconf_ops, |
| 445 | .owner = THIS_MODULE, |
| 446 | }; |
| 447 | |
| 448 | static int pm8xxx_mpp_direction_input(struct gpio_chip *chip, |
| 449 | unsigned offset) |
| 450 | { |
| 451 | struct pm8xxx_mpp *pctrl = container_of(chip, struct pm8xxx_mpp, chip); |
| 452 | struct pm8xxx_pin_data *pin = pctrl->desc.pins[offset].drv_data; |
| 453 | |
| 454 | switch (pin->mode) { |
| 455 | case PM8XXX_MPP_DIGITAL: |
| 456 | pin->input = true; |
| 457 | break; |
| 458 | case PM8XXX_MPP_ANALOG: |
| 459 | pin->input = true; |
| 460 | pin->output = true; |
| 461 | break; |
| 462 | case PM8XXX_MPP_SINK: |
| 463 | return -EINVAL; |
| 464 | } |
| 465 | |
| 466 | pm8xxx_mpp_update(pctrl, pin); |
| 467 | |
| 468 | return 0; |
| 469 | } |
| 470 | |
| 471 | static int pm8xxx_mpp_direction_output(struct gpio_chip *chip, |
| 472 | unsigned offset, |
| 473 | int value) |
| 474 | { |
| 475 | struct pm8xxx_mpp *pctrl = container_of(chip, struct pm8xxx_mpp, chip); |
| 476 | struct pm8xxx_pin_data *pin = pctrl->desc.pins[offset].drv_data; |
| 477 | |
| 478 | switch (pin->mode) { |
| 479 | case PM8XXX_MPP_DIGITAL: |
| 480 | pin->output = true; |
| 481 | break; |
| 482 | case PM8XXX_MPP_ANALOG: |
| 483 | pin->input = false; |
| 484 | pin->output = true; |
| 485 | break; |
| 486 | case PM8XXX_MPP_SINK: |
| 487 | pin->input = false; |
| 488 | pin->output = true; |
| 489 | break; |
| 490 | } |
| 491 | |
| 492 | pm8xxx_mpp_update(pctrl, pin); |
| 493 | |
| 494 | return 0; |
| 495 | } |
| 496 | |
| 497 | static int pm8xxx_mpp_get(struct gpio_chip *chip, unsigned offset) |
| 498 | { |
| 499 | struct pm8xxx_mpp *pctrl = container_of(chip, struct pm8xxx_mpp, chip); |
| 500 | struct pm8xxx_pin_data *pin = pctrl->desc.pins[offset].drv_data; |
| 501 | bool state; |
| 502 | int ret; |
| 503 | |
| 504 | if (!pin->input) |
Linus Walleij | b9164f04 | 2015-12-21 16:36:17 +0100 | [diff] [blame^] | 505 | return !!pin->output_value; |
Bjorn Andersson | b4c45fe | 2015-07-14 23:40:35 -0700 | [diff] [blame] | 506 | |
| 507 | ret = irq_get_irqchip_state(pin->irq, IRQCHIP_STATE_LINE_LEVEL, &state); |
| 508 | if (!ret) |
Linus Walleij | b9164f04 | 2015-12-21 16:36:17 +0100 | [diff] [blame^] | 509 | ret = state; |
Bjorn Andersson | b4c45fe | 2015-07-14 23:40:35 -0700 | [diff] [blame] | 510 | |
Linus Walleij | b9164f04 | 2015-12-21 16:36:17 +0100 | [diff] [blame^] | 511 | return !!ret; |
Bjorn Andersson | b4c45fe | 2015-07-14 23:40:35 -0700 | [diff] [blame] | 512 | } |
| 513 | |
| 514 | static void pm8xxx_mpp_set(struct gpio_chip *chip, unsigned offset, int value) |
| 515 | { |
| 516 | struct pm8xxx_mpp *pctrl = container_of(chip, struct pm8xxx_mpp, chip); |
| 517 | struct pm8xxx_pin_data *pin = pctrl->desc.pins[offset].drv_data; |
| 518 | |
| 519 | pin->output_value = !!value; |
| 520 | |
| 521 | pm8xxx_mpp_update(pctrl, pin); |
| 522 | } |
| 523 | |
| 524 | static int pm8xxx_mpp_of_xlate(struct gpio_chip *chip, |
| 525 | const struct of_phandle_args *gpio_desc, |
| 526 | u32 *flags) |
| 527 | { |
| 528 | if (chip->of_gpio_n_cells < 2) |
| 529 | return -EINVAL; |
| 530 | |
| 531 | if (flags) |
| 532 | *flags = gpio_desc->args[1]; |
| 533 | |
| 534 | return gpio_desc->args[0] - 1; |
| 535 | } |
| 536 | |
| 537 | |
| 538 | static int pm8xxx_mpp_to_irq(struct gpio_chip *chip, unsigned offset) |
| 539 | { |
| 540 | struct pm8xxx_mpp *pctrl = container_of(chip, struct pm8xxx_mpp, chip); |
| 541 | struct pm8xxx_pin_data *pin = pctrl->desc.pins[offset].drv_data; |
| 542 | |
| 543 | return pin->irq; |
| 544 | } |
| 545 | |
| 546 | #ifdef CONFIG_DEBUG_FS |
| 547 | #include <linux/seq_file.h> |
| 548 | |
| 549 | static void pm8xxx_mpp_dbg_show_one(struct seq_file *s, |
| 550 | struct pinctrl_dev *pctldev, |
| 551 | struct gpio_chip *chip, |
| 552 | unsigned offset, |
| 553 | unsigned gpio) |
| 554 | { |
| 555 | struct pm8xxx_mpp *pctrl = container_of(chip, struct pm8xxx_mpp, chip); |
| 556 | struct pm8xxx_pin_data *pin = pctrl->desc.pins[offset].drv_data; |
| 557 | |
| 558 | static const char * const aout_lvls[] = { |
| 559 | "1v25", "1v25_2", "0v625", "0v3125", "mpp", "abus1", "abus2", |
| 560 | "abus3" |
| 561 | }; |
| 562 | |
| 563 | static const char * const amuxs[] = { |
| 564 | "amux5", "amux6", "amux7", "amux8", "amux9", "abus1", "abus2", |
| 565 | "abus3", |
| 566 | }; |
| 567 | |
| 568 | seq_printf(s, " mpp%-2d:", offset + 1); |
| 569 | |
| 570 | switch (pin->mode) { |
| 571 | case PM8XXX_MPP_DIGITAL: |
| 572 | seq_puts(s, " digital "); |
| 573 | if (pin->dtest) { |
| 574 | seq_printf(s, "dtest%d\n", pin->dtest); |
| 575 | } else if (pin->input && pin->output) { |
| 576 | if (pin->high_z) |
| 577 | seq_puts(s, "bi-dir high-z"); |
| 578 | else |
| 579 | seq_printf(s, "bi-dir %dOhm", pin->pullup); |
| 580 | } else if (pin->input) { |
| 581 | if (pin->dtest) |
| 582 | seq_printf(s, "in dtest%d", pin->dtest); |
| 583 | else |
| 584 | seq_puts(s, "in gpio"); |
| 585 | } else if (pin->output) { |
| 586 | seq_puts(s, "out "); |
| 587 | |
| 588 | if (!pin->paired) { |
| 589 | seq_puts(s, pin->output_value ? |
| 590 | "high" : "low"); |
| 591 | } else { |
| 592 | seq_puts(s, pin->output_value ? |
| 593 | "inverted" : "follow"); |
| 594 | } |
| 595 | } |
| 596 | break; |
| 597 | case PM8XXX_MPP_ANALOG: |
| 598 | seq_puts(s, " analog "); |
| 599 | if (pin->output) { |
| 600 | seq_printf(s, "out %s ", aout_lvls[pin->aout_level]); |
| 601 | if (!pin->paired) { |
| 602 | seq_puts(s, pin->output_value ? |
| 603 | "high" : "low"); |
| 604 | } else { |
| 605 | seq_puts(s, pin->output_value ? |
| 606 | "inverted" : "follow"); |
| 607 | } |
| 608 | } else { |
| 609 | seq_printf(s, "input mux %s", amuxs[pin->amux]); |
| 610 | } |
| 611 | break; |
| 612 | case PM8XXX_MPP_SINK: |
| 613 | seq_printf(s, " sink %dmA ", pin->drive_strength); |
| 614 | if (pin->dtest) { |
| 615 | seq_printf(s, "dtest%d", pin->dtest); |
| 616 | } else { |
| 617 | if (!pin->paired) { |
| 618 | seq_puts(s, pin->output_value ? |
| 619 | "high" : "low"); |
| 620 | } else { |
| 621 | seq_puts(s, pin->output_value ? |
| 622 | "inverted" : "follow"); |
| 623 | } |
| 624 | } |
| 625 | break; |
| 626 | } |
| 627 | |
| 628 | } |
| 629 | |
| 630 | static void pm8xxx_mpp_dbg_show(struct seq_file *s, struct gpio_chip *chip) |
| 631 | { |
| 632 | unsigned gpio = chip->base; |
| 633 | unsigned i; |
| 634 | |
| 635 | for (i = 0; i < chip->ngpio; i++, gpio++) { |
| 636 | pm8xxx_mpp_dbg_show_one(s, NULL, chip, i, gpio); |
| 637 | seq_puts(s, "\n"); |
| 638 | } |
| 639 | } |
| 640 | |
| 641 | #else |
Jonas Gorski | 11091fb | 2015-10-11 17:39:31 +0200 | [diff] [blame] | 642 | #define pm8xxx_mpp_dbg_show NULL |
Bjorn Andersson | b4c45fe | 2015-07-14 23:40:35 -0700 | [diff] [blame] | 643 | #endif |
| 644 | |
| 645 | static struct gpio_chip pm8xxx_mpp_template = { |
| 646 | .direction_input = pm8xxx_mpp_direction_input, |
| 647 | .direction_output = pm8xxx_mpp_direction_output, |
| 648 | .get = pm8xxx_mpp_get, |
| 649 | .set = pm8xxx_mpp_set, |
| 650 | .of_xlate = pm8xxx_mpp_of_xlate, |
| 651 | .to_irq = pm8xxx_mpp_to_irq, |
| 652 | .dbg_show = pm8xxx_mpp_dbg_show, |
| 653 | .owner = THIS_MODULE, |
| 654 | }; |
| 655 | |
| 656 | static int pm8xxx_pin_populate(struct pm8xxx_mpp *pctrl, |
| 657 | struct pm8xxx_pin_data *pin) |
| 658 | { |
| 659 | unsigned int val; |
| 660 | unsigned level; |
| 661 | unsigned ctrl; |
| 662 | unsigned type; |
| 663 | int ret; |
| 664 | |
| 665 | ret = regmap_read(pctrl->regmap, pin->reg, &val); |
| 666 | if (ret) { |
| 667 | dev_err(pctrl->dev, "failed to read register\n"); |
| 668 | return ret; |
| 669 | } |
| 670 | |
| 671 | type = (val >> 5) & 7; |
| 672 | level = (val >> 2) & 7; |
| 673 | ctrl = (val) & 3; |
| 674 | |
| 675 | switch (type) { |
| 676 | case PM8XXX_MPP_TYPE_D_INPUT: |
| 677 | pin->mode = PM8XXX_MPP_DIGITAL; |
| 678 | pin->input = true; |
| 679 | pin->power_source = level; |
| 680 | pin->dtest = ctrl; |
| 681 | break; |
| 682 | case PM8XXX_MPP_TYPE_D_OUTPUT: |
| 683 | pin->mode = PM8XXX_MPP_DIGITAL; |
| 684 | pin->output = true; |
| 685 | pin->power_source = level; |
| 686 | pin->output_value = !!(ctrl & BIT(0)); |
| 687 | pin->paired = !!(ctrl & BIT(1)); |
| 688 | break; |
| 689 | case PM8XXX_MPP_TYPE_D_BI_DIR: |
| 690 | pin->mode = PM8XXX_MPP_DIGITAL; |
| 691 | pin->input = true; |
| 692 | pin->output = true; |
| 693 | pin->power_source = level; |
| 694 | switch (ctrl) { |
| 695 | case PM8XXX_MPP_BI_PULLUP_1KOHM: |
| 696 | pin->pullup = 600; |
| 697 | break; |
| 698 | case PM8XXX_MPP_BI_PULLUP_OPEN: |
| 699 | pin->high_z = true; |
| 700 | break; |
| 701 | case PM8XXX_MPP_BI_PULLUP_10KOHM: |
| 702 | pin->pullup = 10000; |
| 703 | break; |
| 704 | case PM8XXX_MPP_BI_PULLUP_30KOHM: |
| 705 | pin->pullup = 30000; |
| 706 | break; |
| 707 | } |
| 708 | break; |
| 709 | case PM8XXX_MPP_TYPE_A_INPUT: |
| 710 | pin->mode = PM8XXX_MPP_ANALOG; |
| 711 | pin->input = true; |
| 712 | pin->amux = level; |
| 713 | break; |
| 714 | case PM8XXX_MPP_TYPE_A_OUTPUT: |
| 715 | pin->mode = PM8XXX_MPP_ANALOG; |
| 716 | pin->output = true; |
| 717 | pin->aout_level = level; |
| 718 | pin->output_value = !!(ctrl & BIT(0)); |
| 719 | pin->paired = !!(ctrl & BIT(1)); |
| 720 | break; |
| 721 | case PM8XXX_MPP_TYPE_SINK: |
| 722 | pin->mode = PM8XXX_MPP_SINK; |
| 723 | pin->drive_strength = 5 * (level + 1); |
| 724 | pin->output_value = !!(ctrl & BIT(0)); |
| 725 | pin->paired = !!(ctrl & BIT(1)); |
| 726 | break; |
| 727 | case PM8XXX_MPP_TYPE_DTEST_SINK: |
| 728 | pin->mode = PM8XXX_MPP_SINK; |
| 729 | pin->dtest = ctrl + 1; |
| 730 | pin->drive_strength = 5 * (level + 1); |
| 731 | break; |
| 732 | case PM8XXX_MPP_TYPE_DTEST_OUTPUT: |
| 733 | pin->mode = PM8XXX_MPP_DIGITAL; |
| 734 | pin->power_source = level; |
| 735 | if (ctrl >= 1) |
| 736 | pin->dtest = ctrl; |
| 737 | break; |
| 738 | } |
| 739 | |
| 740 | return 0; |
| 741 | } |
| 742 | |
| 743 | static const struct of_device_id pm8xxx_mpp_of_match[] = { |
| 744 | { .compatible = "qcom,pm8018-mpp", .data = (void *)6 }, |
| 745 | { .compatible = "qcom,pm8038-mpp", .data = (void *)6 }, |
| 746 | { .compatible = "qcom,pm8917-mpp", .data = (void *)10 }, |
| 747 | { .compatible = "qcom,pm8821-mpp", .data = (void *)4 }, |
| 748 | { .compatible = "qcom,pm8921-mpp", .data = (void *)12 }, |
| 749 | { }, |
| 750 | }; |
| 751 | MODULE_DEVICE_TABLE(of, pm8xxx_mpp_of_match); |
| 752 | |
| 753 | static int pm8xxx_mpp_probe(struct platform_device *pdev) |
| 754 | { |
| 755 | struct pm8xxx_pin_data *pin_data; |
| 756 | struct pinctrl_pin_desc *pins; |
| 757 | struct pm8xxx_mpp *pctrl; |
| 758 | int ret; |
| 759 | int i; |
| 760 | |
| 761 | pctrl = devm_kzalloc(&pdev->dev, sizeof(*pctrl), GFP_KERNEL); |
| 762 | if (!pctrl) |
| 763 | return -ENOMEM; |
| 764 | |
| 765 | pctrl->dev = &pdev->dev; |
Arnd Bergmann | c3dd25c | 2015-11-16 17:41:18 +0100 | [diff] [blame] | 766 | pctrl->npins = (unsigned long)of_device_get_match_data(&pdev->dev); |
Bjorn Andersson | b4c45fe | 2015-07-14 23:40:35 -0700 | [diff] [blame] | 767 | |
| 768 | pctrl->regmap = dev_get_regmap(pdev->dev.parent, NULL); |
| 769 | if (!pctrl->regmap) { |
| 770 | dev_err(&pdev->dev, "parent regmap unavailable\n"); |
| 771 | return -ENXIO; |
| 772 | } |
| 773 | |
| 774 | pctrl->desc = pm8xxx_pinctrl_desc; |
| 775 | pctrl->desc.npins = pctrl->npins; |
| 776 | |
| 777 | pins = devm_kcalloc(&pdev->dev, |
| 778 | pctrl->desc.npins, |
| 779 | sizeof(struct pinctrl_pin_desc), |
| 780 | GFP_KERNEL); |
| 781 | if (!pins) |
| 782 | return -ENOMEM; |
| 783 | |
| 784 | pin_data = devm_kcalloc(&pdev->dev, |
| 785 | pctrl->desc.npins, |
| 786 | sizeof(struct pm8xxx_pin_data), |
| 787 | GFP_KERNEL); |
| 788 | if (!pin_data) |
| 789 | return -ENOMEM; |
| 790 | |
| 791 | for (i = 0; i < pctrl->desc.npins; i++) { |
| 792 | pin_data[i].reg = SSBI_REG_ADDR_MPP(i); |
| 793 | pin_data[i].irq = platform_get_irq(pdev, i); |
| 794 | if (pin_data[i].irq < 0) { |
| 795 | dev_err(&pdev->dev, |
| 796 | "missing interrupts for pin %d\n", i); |
| 797 | return pin_data[i].irq; |
| 798 | } |
| 799 | |
| 800 | ret = pm8xxx_pin_populate(pctrl, &pin_data[i]); |
| 801 | if (ret) |
| 802 | return ret; |
| 803 | |
| 804 | pins[i].number = i; |
| 805 | pins[i].name = pm8xxx_groups[i]; |
| 806 | pins[i].drv_data = &pin_data[i]; |
| 807 | } |
| 808 | pctrl->desc.pins = pins; |
| 809 | |
| 810 | pctrl->desc.num_custom_params = ARRAY_SIZE(pm8xxx_mpp_bindings); |
| 811 | pctrl->desc.custom_params = pm8xxx_mpp_bindings; |
| 812 | #ifdef CONFIG_DEBUG_FS |
| 813 | pctrl->desc.custom_conf_items = pm8xxx_conf_items; |
| 814 | #endif |
| 815 | |
| 816 | pctrl->pctrl = pinctrl_register(&pctrl->desc, &pdev->dev, pctrl); |
Julia Lawall | d259ec2 | 2015-08-24 23:12:26 +0200 | [diff] [blame] | 817 | if (IS_ERR(pctrl->pctrl)) { |
Bjorn Andersson | b4c45fe | 2015-07-14 23:40:35 -0700 | [diff] [blame] | 818 | dev_err(&pdev->dev, "couldn't register pm8xxx mpp driver\n"); |
Julia Lawall | d259ec2 | 2015-08-24 23:12:26 +0200 | [diff] [blame] | 819 | return PTR_ERR(pctrl->pctrl); |
Bjorn Andersson | b4c45fe | 2015-07-14 23:40:35 -0700 | [diff] [blame] | 820 | } |
| 821 | |
| 822 | pctrl->chip = pm8xxx_mpp_template; |
| 823 | pctrl->chip.base = -1; |
Linus Walleij | 58383c78 | 2015-11-04 09:56:26 +0100 | [diff] [blame] | 824 | pctrl->chip.parent = &pdev->dev; |
Bjorn Andersson | b4c45fe | 2015-07-14 23:40:35 -0700 | [diff] [blame] | 825 | pctrl->chip.of_node = pdev->dev.of_node; |
| 826 | pctrl->chip.of_gpio_n_cells = 2; |
| 827 | pctrl->chip.label = dev_name(pctrl->dev); |
| 828 | pctrl->chip.ngpio = pctrl->npins; |
| 829 | ret = gpiochip_add(&pctrl->chip); |
| 830 | if (ret) { |
| 831 | dev_err(&pdev->dev, "failed register gpiochip\n"); |
| 832 | goto unregister_pinctrl; |
| 833 | } |
| 834 | |
| 835 | ret = gpiochip_add_pin_range(&pctrl->chip, |
| 836 | dev_name(pctrl->dev), |
| 837 | 0, 0, pctrl->chip.ngpio); |
| 838 | if (ret) { |
| 839 | dev_err(pctrl->dev, "failed to add pin range\n"); |
| 840 | goto unregister_gpiochip; |
| 841 | } |
| 842 | |
| 843 | platform_set_drvdata(pdev, pctrl); |
| 844 | |
| 845 | dev_dbg(&pdev->dev, "Qualcomm pm8xxx mpp driver probed\n"); |
| 846 | |
| 847 | return 0; |
| 848 | |
| 849 | unregister_gpiochip: |
| 850 | gpiochip_remove(&pctrl->chip); |
| 851 | |
| 852 | unregister_pinctrl: |
| 853 | pinctrl_unregister(pctrl->pctrl); |
| 854 | |
| 855 | return ret; |
| 856 | } |
| 857 | |
| 858 | static int pm8xxx_mpp_remove(struct platform_device *pdev) |
| 859 | { |
| 860 | struct pm8xxx_mpp *pctrl = platform_get_drvdata(pdev); |
| 861 | |
| 862 | gpiochip_remove(&pctrl->chip); |
| 863 | |
| 864 | pinctrl_unregister(pctrl->pctrl); |
| 865 | |
| 866 | return 0; |
| 867 | } |
| 868 | |
| 869 | static struct platform_driver pm8xxx_mpp_driver = { |
| 870 | .driver = { |
| 871 | .name = "qcom-ssbi-mpp", |
| 872 | .of_match_table = pm8xxx_mpp_of_match, |
| 873 | }, |
| 874 | .probe = pm8xxx_mpp_probe, |
| 875 | .remove = pm8xxx_mpp_remove, |
| 876 | }; |
| 877 | |
| 878 | module_platform_driver(pm8xxx_mpp_driver); |
| 879 | |
| 880 | MODULE_AUTHOR("Bjorn Andersson <bjorn.andersson@sonymobile.com>"); |
| 881 | MODULE_DESCRIPTION("Qualcomm PM8xxx MPP driver"); |
| 882 | MODULE_LICENSE("GPL v2"); |