Artur Paszkiewicz | 3418d03 | 2017-03-09 09:59:59 +0100 | [diff] [blame] | 1 | /* |
| 2 | * Partial Parity Log for closing the RAID5 write hole |
| 3 | * Copyright (c) 2017, Intel Corporation. |
| 4 | * |
| 5 | * This program is free software; you can redistribute it and/or modify it |
| 6 | * under the terms and conditions of the GNU General Public License, |
| 7 | * version 2, as published by the Free Software Foundation. |
| 8 | * |
| 9 | * This program is distributed in the hope it will be useful, but WITHOUT |
| 10 | * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or |
| 11 | * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for |
| 12 | * more details. |
| 13 | */ |
| 14 | |
| 15 | #include <linux/kernel.h> |
| 16 | #include <linux/blkdev.h> |
| 17 | #include <linux/slab.h> |
| 18 | #include <linux/crc32c.h> |
| 19 | #include <linux/flex_array.h> |
| 20 | #include <linux/async_tx.h> |
| 21 | #include <linux/raid/md_p.h> |
| 22 | #include "md.h" |
| 23 | #include "raid5.h" |
| 24 | |
| 25 | /* |
| 26 | * PPL consists of a 4KB header (struct ppl_header) and at least 128KB for |
| 27 | * partial parity data. The header contains an array of entries |
| 28 | * (struct ppl_header_entry) which describe the logged write requests. |
| 29 | * Partial parity for the entries comes after the header, written in the same |
| 30 | * sequence as the entries: |
| 31 | * |
| 32 | * Header |
| 33 | * entry0 |
| 34 | * ... |
| 35 | * entryN |
| 36 | * PP data |
| 37 | * PP for entry0 |
| 38 | * ... |
| 39 | * PP for entryN |
| 40 | * |
| 41 | * An entry describes one or more consecutive stripe_heads, up to a full |
| 42 | * stripe. The modifed raid data chunks form an m-by-n matrix, where m is the |
| 43 | * number of stripe_heads in the entry and n is the number of modified data |
| 44 | * disks. Every stripe_head in the entry must write to the same data disks. |
| 45 | * An example of a valid case described by a single entry (writes to the first |
| 46 | * stripe of a 4 disk array, 16k chunk size): |
| 47 | * |
| 48 | * sh->sector dd0 dd1 dd2 ppl |
| 49 | * +-----+-----+-----+ |
| 50 | * 0 | --- | --- | --- | +----+ |
| 51 | * 8 | -W- | -W- | --- | | pp | data_sector = 8 |
| 52 | * 16 | -W- | -W- | --- | | pp | data_size = 3 * 2 * 4k |
| 53 | * 24 | -W- | -W- | --- | | pp | pp_size = 3 * 4k |
| 54 | * +-----+-----+-----+ +----+ |
| 55 | * |
| 56 | * data_sector is the first raid sector of the modified data, data_size is the |
| 57 | * total size of modified data and pp_size is the size of partial parity for |
| 58 | * this entry. Entries for full stripe writes contain no partial parity |
| 59 | * (pp_size = 0), they only mark the stripes for which parity should be |
| 60 | * recalculated after an unclean shutdown. Every entry holds a checksum of its |
| 61 | * partial parity, the header also has a checksum of the header itself. |
| 62 | * |
| 63 | * A write request is always logged to the PPL instance stored on the parity |
| 64 | * disk of the corresponding stripe. For each member disk there is one ppl_log |
| 65 | * used to handle logging for this disk, independently from others. They are |
| 66 | * grouped in child_logs array in struct ppl_conf, which is assigned to |
| 67 | * r5conf->log_private. |
| 68 | * |
| 69 | * ppl_io_unit represents a full PPL write, header_page contains the ppl_header. |
| 70 | * PPL entries for logged stripes are added in ppl_log_stripe(). A stripe_head |
| 71 | * can be appended to the last entry if it meets the conditions for a valid |
| 72 | * entry described above, otherwise a new entry is added. Checksums of entries |
| 73 | * are calculated incrementally as stripes containing partial parity are being |
| 74 | * added. ppl_submit_iounit() calculates the checksum of the header and submits |
| 75 | * a bio containing the header page and partial parity pages (sh->ppl_page) for |
| 76 | * all stripes of the io_unit. When the PPL write completes, the stripes |
| 77 | * associated with the io_unit are released and raid5d starts writing their data |
| 78 | * and parity. When all stripes are written, the io_unit is freed and the next |
| 79 | * can be submitted. |
| 80 | * |
| 81 | * An io_unit is used to gather stripes until it is submitted or becomes full |
| 82 | * (if the maximum number of entries or size of PPL is reached). Another io_unit |
| 83 | * can't be submitted until the previous has completed (PPL and stripe |
| 84 | * data+parity is written). The log->io_list tracks all io_units of a log |
| 85 | * (for a single member disk). New io_units are added to the end of the list |
| 86 | * and the first io_unit is submitted, if it is not submitted already. |
| 87 | * The current io_unit accepting new stripes is always at the end of the list. |
| 88 | */ |
| 89 | |
| 90 | struct ppl_conf { |
| 91 | struct mddev *mddev; |
| 92 | |
| 93 | /* array of child logs, one for each raid disk */ |
| 94 | struct ppl_log *child_logs; |
| 95 | int count; |
| 96 | |
| 97 | int block_size; /* the logical block size used for data_sector |
| 98 | * in ppl_header_entry */ |
| 99 | u32 signature; /* raid array identifier */ |
| 100 | atomic64_t seq; /* current log write sequence number */ |
| 101 | |
| 102 | struct kmem_cache *io_kc; |
| 103 | mempool_t *io_pool; |
| 104 | struct bio_set *bs; |
| 105 | mempool_t *meta_pool; |
Artur Paszkiewicz | 4536bf9b | 2017-03-09 10:00:01 +0100 | [diff] [blame] | 106 | |
| 107 | /* used only for recovery */ |
| 108 | int recovered_entries; |
| 109 | int mismatch_count; |
Artur Paszkiewicz | 3418d03 | 2017-03-09 09:59:59 +0100 | [diff] [blame] | 110 | }; |
| 111 | |
| 112 | struct ppl_log { |
| 113 | struct ppl_conf *ppl_conf; /* shared between all log instances */ |
| 114 | |
| 115 | struct md_rdev *rdev; /* array member disk associated with |
| 116 | * this log instance */ |
| 117 | struct mutex io_mutex; |
| 118 | struct ppl_io_unit *current_io; /* current io_unit accepting new data |
| 119 | * always at the end of io_list */ |
| 120 | spinlock_t io_list_lock; |
| 121 | struct list_head io_list; /* all io_units of this log */ |
| 122 | struct list_head no_mem_stripes;/* stripes to retry if failed to |
| 123 | * allocate io_unit */ |
| 124 | }; |
| 125 | |
| 126 | #define PPL_IO_INLINE_BVECS 32 |
| 127 | |
| 128 | struct ppl_io_unit { |
| 129 | struct ppl_log *log; |
| 130 | |
| 131 | struct page *header_page; /* for ppl_header */ |
| 132 | |
| 133 | unsigned int entries_count; /* number of entries in ppl_header */ |
| 134 | unsigned int pp_size; /* total size current of partial parity */ |
| 135 | |
| 136 | u64 seq; /* sequence number of this log write */ |
| 137 | struct list_head log_sibling; /* log->io_list */ |
| 138 | |
| 139 | struct list_head stripe_list; /* stripes added to the io_unit */ |
| 140 | atomic_t pending_stripes; /* how many stripes not written to raid */ |
| 141 | |
| 142 | bool submitted; /* true if write to log started */ |
| 143 | |
| 144 | /* inline bio and its biovec for submitting the iounit */ |
| 145 | struct bio bio; |
| 146 | struct bio_vec biovec[PPL_IO_INLINE_BVECS]; |
| 147 | }; |
| 148 | |
| 149 | struct dma_async_tx_descriptor * |
| 150 | ops_run_partial_parity(struct stripe_head *sh, struct raid5_percpu *percpu, |
| 151 | struct dma_async_tx_descriptor *tx) |
| 152 | { |
| 153 | int disks = sh->disks; |
| 154 | struct page **xor_srcs = flex_array_get(percpu->scribble, 0); |
| 155 | int count = 0, pd_idx = sh->pd_idx, i; |
| 156 | struct async_submit_ctl submit; |
| 157 | |
| 158 | pr_debug("%s: stripe %llu\n", __func__, (unsigned long long)sh->sector); |
| 159 | |
| 160 | /* |
| 161 | * Partial parity is the XOR of stripe data chunks that are not changed |
| 162 | * during the write request. Depending on available data |
| 163 | * (read-modify-write vs. reconstruct-write case) we calculate it |
| 164 | * differently. |
| 165 | */ |
| 166 | if (sh->reconstruct_state == reconstruct_state_prexor_drain_run) { |
| 167 | /* rmw: xor old data and parity from updated disks */ |
| 168 | for (i = disks; i--;) { |
| 169 | struct r5dev *dev = &sh->dev[i]; |
| 170 | if (test_bit(R5_Wantdrain, &dev->flags) || i == pd_idx) |
| 171 | xor_srcs[count++] = dev->page; |
| 172 | } |
| 173 | } else if (sh->reconstruct_state == reconstruct_state_drain_run) { |
| 174 | /* rcw: xor data from all not updated disks */ |
| 175 | for (i = disks; i--;) { |
| 176 | struct r5dev *dev = &sh->dev[i]; |
| 177 | if (test_bit(R5_UPTODATE, &dev->flags)) |
| 178 | xor_srcs[count++] = dev->page; |
| 179 | } |
| 180 | } else { |
| 181 | return tx; |
| 182 | } |
| 183 | |
| 184 | init_async_submit(&submit, ASYNC_TX_FENCE|ASYNC_TX_XOR_ZERO_DST, tx, |
| 185 | NULL, sh, flex_array_get(percpu->scribble, 0) |
| 186 | + sizeof(struct page *) * (sh->disks + 2)); |
| 187 | |
| 188 | if (count == 1) |
| 189 | tx = async_memcpy(sh->ppl_page, xor_srcs[0], 0, 0, PAGE_SIZE, |
| 190 | &submit); |
| 191 | else |
| 192 | tx = async_xor(sh->ppl_page, xor_srcs, 0, count, PAGE_SIZE, |
| 193 | &submit); |
| 194 | |
| 195 | return tx; |
| 196 | } |
| 197 | |
| 198 | static struct ppl_io_unit *ppl_new_iounit(struct ppl_log *log, |
| 199 | struct stripe_head *sh) |
| 200 | { |
| 201 | struct ppl_conf *ppl_conf = log->ppl_conf; |
| 202 | struct ppl_io_unit *io; |
| 203 | struct ppl_header *pplhdr; |
| 204 | |
| 205 | io = mempool_alloc(ppl_conf->io_pool, GFP_ATOMIC); |
| 206 | if (!io) |
| 207 | return NULL; |
| 208 | |
| 209 | memset(io, 0, sizeof(*io)); |
| 210 | io->log = log; |
| 211 | INIT_LIST_HEAD(&io->log_sibling); |
| 212 | INIT_LIST_HEAD(&io->stripe_list); |
| 213 | atomic_set(&io->pending_stripes, 0); |
| 214 | bio_init(&io->bio, io->biovec, PPL_IO_INLINE_BVECS); |
| 215 | |
| 216 | io->header_page = mempool_alloc(ppl_conf->meta_pool, GFP_NOIO); |
| 217 | pplhdr = page_address(io->header_page); |
| 218 | clear_page(pplhdr); |
| 219 | memset(pplhdr->reserved, 0xff, PPL_HDR_RESERVED); |
| 220 | pplhdr->signature = cpu_to_le32(ppl_conf->signature); |
| 221 | |
| 222 | io->seq = atomic64_add_return(1, &ppl_conf->seq); |
| 223 | pplhdr->generation = cpu_to_le64(io->seq); |
| 224 | |
| 225 | return io; |
| 226 | } |
| 227 | |
| 228 | static int ppl_log_stripe(struct ppl_log *log, struct stripe_head *sh) |
| 229 | { |
| 230 | struct ppl_io_unit *io = log->current_io; |
| 231 | struct ppl_header_entry *e = NULL; |
| 232 | struct ppl_header *pplhdr; |
| 233 | int i; |
| 234 | sector_t data_sector = 0; |
| 235 | int data_disks = 0; |
| 236 | unsigned int entry_space = (log->rdev->ppl.size << 9) - PPL_HEADER_SIZE; |
| 237 | struct r5conf *conf = sh->raid_conf; |
| 238 | |
| 239 | pr_debug("%s: stripe: %llu\n", __func__, (unsigned long long)sh->sector); |
| 240 | |
| 241 | /* check if current io_unit is full */ |
| 242 | if (io && (io->pp_size == entry_space || |
| 243 | io->entries_count == PPL_HDR_MAX_ENTRIES)) { |
| 244 | pr_debug("%s: add io_unit blocked by seq: %llu\n", |
| 245 | __func__, io->seq); |
| 246 | io = NULL; |
| 247 | } |
| 248 | |
| 249 | /* add a new unit if there is none or the current is full */ |
| 250 | if (!io) { |
| 251 | io = ppl_new_iounit(log, sh); |
| 252 | if (!io) |
| 253 | return -ENOMEM; |
| 254 | spin_lock_irq(&log->io_list_lock); |
| 255 | list_add_tail(&io->log_sibling, &log->io_list); |
| 256 | spin_unlock_irq(&log->io_list_lock); |
| 257 | |
| 258 | log->current_io = io; |
| 259 | } |
| 260 | |
| 261 | for (i = 0; i < sh->disks; i++) { |
| 262 | struct r5dev *dev = &sh->dev[i]; |
| 263 | |
| 264 | if (i != sh->pd_idx && test_bit(R5_Wantwrite, &dev->flags)) { |
| 265 | if (!data_disks || dev->sector < data_sector) |
| 266 | data_sector = dev->sector; |
| 267 | data_disks++; |
| 268 | } |
| 269 | } |
| 270 | BUG_ON(!data_disks); |
| 271 | |
| 272 | pr_debug("%s: seq: %llu data_sector: %llu data_disks: %d\n", __func__, |
| 273 | io->seq, (unsigned long long)data_sector, data_disks); |
| 274 | |
| 275 | pplhdr = page_address(io->header_page); |
| 276 | |
| 277 | if (io->entries_count > 0) { |
| 278 | struct ppl_header_entry *last = |
| 279 | &pplhdr->entries[io->entries_count - 1]; |
| 280 | struct stripe_head *sh_last = list_last_entry( |
| 281 | &io->stripe_list, struct stripe_head, log_list); |
| 282 | u64 data_sector_last = le64_to_cpu(last->data_sector); |
| 283 | u32 data_size_last = le32_to_cpu(last->data_size); |
| 284 | |
| 285 | /* |
| 286 | * Check if we can append the stripe to the last entry. It must |
| 287 | * be just after the last logged stripe and write to the same |
| 288 | * disks. Use bit shift and logarithm to avoid 64-bit division. |
| 289 | */ |
| 290 | if ((sh->sector == sh_last->sector + STRIPE_SECTORS) && |
| 291 | (data_sector >> ilog2(conf->chunk_sectors) == |
| 292 | data_sector_last >> ilog2(conf->chunk_sectors)) && |
| 293 | ((data_sector - data_sector_last) * data_disks == |
| 294 | data_size_last >> 9)) |
| 295 | e = last; |
| 296 | } |
| 297 | |
| 298 | if (!e) { |
| 299 | e = &pplhdr->entries[io->entries_count++]; |
| 300 | e->data_sector = cpu_to_le64(data_sector); |
| 301 | e->parity_disk = cpu_to_le32(sh->pd_idx); |
| 302 | e->checksum = cpu_to_le32(~0); |
| 303 | } |
| 304 | |
| 305 | le32_add_cpu(&e->data_size, data_disks << PAGE_SHIFT); |
| 306 | |
| 307 | /* don't write any PP if full stripe write */ |
| 308 | if (!test_bit(STRIPE_FULL_WRITE, &sh->state)) { |
| 309 | le32_add_cpu(&e->pp_size, PAGE_SIZE); |
| 310 | io->pp_size += PAGE_SIZE; |
| 311 | e->checksum = cpu_to_le32(crc32c_le(le32_to_cpu(e->checksum), |
| 312 | page_address(sh->ppl_page), |
| 313 | PAGE_SIZE)); |
| 314 | } |
| 315 | |
| 316 | list_add_tail(&sh->log_list, &io->stripe_list); |
| 317 | atomic_inc(&io->pending_stripes); |
| 318 | sh->ppl_io = io; |
| 319 | |
| 320 | return 0; |
| 321 | } |
| 322 | |
| 323 | int ppl_write_stripe(struct r5conf *conf, struct stripe_head *sh) |
| 324 | { |
| 325 | struct ppl_conf *ppl_conf = conf->log_private; |
| 326 | struct ppl_io_unit *io = sh->ppl_io; |
| 327 | struct ppl_log *log; |
| 328 | |
| 329 | if (io || test_bit(STRIPE_SYNCING, &sh->state) || |
| 330 | !test_bit(R5_Wantwrite, &sh->dev[sh->pd_idx].flags) || |
| 331 | !test_bit(R5_Insync, &sh->dev[sh->pd_idx].flags)) { |
| 332 | clear_bit(STRIPE_LOG_TRAPPED, &sh->state); |
| 333 | return -EAGAIN; |
| 334 | } |
| 335 | |
| 336 | log = &ppl_conf->child_logs[sh->pd_idx]; |
| 337 | |
| 338 | mutex_lock(&log->io_mutex); |
| 339 | |
| 340 | if (!log->rdev || test_bit(Faulty, &log->rdev->flags)) { |
| 341 | mutex_unlock(&log->io_mutex); |
| 342 | return -EAGAIN; |
| 343 | } |
| 344 | |
| 345 | set_bit(STRIPE_LOG_TRAPPED, &sh->state); |
| 346 | clear_bit(STRIPE_DELAYED, &sh->state); |
| 347 | atomic_inc(&sh->count); |
| 348 | |
| 349 | if (ppl_log_stripe(log, sh)) { |
| 350 | spin_lock_irq(&log->io_list_lock); |
| 351 | list_add_tail(&sh->log_list, &log->no_mem_stripes); |
| 352 | spin_unlock_irq(&log->io_list_lock); |
| 353 | } |
| 354 | |
| 355 | mutex_unlock(&log->io_mutex); |
| 356 | |
| 357 | return 0; |
| 358 | } |
| 359 | |
| 360 | static void ppl_log_endio(struct bio *bio) |
| 361 | { |
| 362 | struct ppl_io_unit *io = bio->bi_private; |
| 363 | struct ppl_log *log = io->log; |
| 364 | struct ppl_conf *ppl_conf = log->ppl_conf; |
| 365 | struct stripe_head *sh, *next; |
| 366 | |
| 367 | pr_debug("%s: seq: %llu\n", __func__, io->seq); |
| 368 | |
| 369 | if (bio->bi_error) |
| 370 | md_error(ppl_conf->mddev, log->rdev); |
| 371 | |
| 372 | mempool_free(io->header_page, ppl_conf->meta_pool); |
| 373 | |
| 374 | list_for_each_entry_safe(sh, next, &io->stripe_list, log_list) { |
| 375 | list_del_init(&sh->log_list); |
| 376 | |
| 377 | set_bit(STRIPE_HANDLE, &sh->state); |
| 378 | raid5_release_stripe(sh); |
| 379 | } |
| 380 | } |
| 381 | |
| 382 | static void ppl_submit_iounit_bio(struct ppl_io_unit *io, struct bio *bio) |
| 383 | { |
| 384 | char b[BDEVNAME_SIZE]; |
| 385 | |
| 386 | pr_debug("%s: seq: %llu size: %u sector: %llu dev: %s\n", |
| 387 | __func__, io->seq, bio->bi_iter.bi_size, |
| 388 | (unsigned long long)bio->bi_iter.bi_sector, |
| 389 | bdevname(bio->bi_bdev, b)); |
| 390 | |
| 391 | submit_bio(bio); |
| 392 | } |
| 393 | |
| 394 | static void ppl_submit_iounit(struct ppl_io_unit *io) |
| 395 | { |
| 396 | struct ppl_log *log = io->log; |
| 397 | struct ppl_conf *ppl_conf = log->ppl_conf; |
| 398 | struct ppl_header *pplhdr = page_address(io->header_page); |
| 399 | struct bio *bio = &io->bio; |
| 400 | struct stripe_head *sh; |
| 401 | int i; |
| 402 | |
Artur Paszkiewicz | 6358c23 | 2017-03-09 10:00:02 +0100 | [diff] [blame] | 403 | bio->bi_private = io; |
| 404 | |
| 405 | if (!log->rdev || test_bit(Faulty, &log->rdev->flags)) { |
| 406 | ppl_log_endio(bio); |
| 407 | return; |
| 408 | } |
| 409 | |
Artur Paszkiewicz | 3418d03 | 2017-03-09 09:59:59 +0100 | [diff] [blame] | 410 | for (i = 0; i < io->entries_count; i++) { |
| 411 | struct ppl_header_entry *e = &pplhdr->entries[i]; |
| 412 | |
| 413 | pr_debug("%s: seq: %llu entry: %d data_sector: %llu pp_size: %u data_size: %u\n", |
| 414 | __func__, io->seq, i, le64_to_cpu(e->data_sector), |
| 415 | le32_to_cpu(e->pp_size), le32_to_cpu(e->data_size)); |
| 416 | |
| 417 | e->data_sector = cpu_to_le64(le64_to_cpu(e->data_sector) >> |
| 418 | ilog2(ppl_conf->block_size >> 9)); |
| 419 | e->checksum = cpu_to_le32(~le32_to_cpu(e->checksum)); |
| 420 | } |
| 421 | |
| 422 | pplhdr->entries_count = cpu_to_le32(io->entries_count); |
| 423 | pplhdr->checksum = cpu_to_le32(~crc32c_le(~0, pplhdr, PPL_HEADER_SIZE)); |
| 424 | |
Artur Paszkiewicz | 3418d03 | 2017-03-09 09:59:59 +0100 | [diff] [blame] | 425 | bio->bi_end_io = ppl_log_endio; |
| 426 | bio->bi_opf = REQ_OP_WRITE | REQ_FUA; |
| 427 | bio->bi_bdev = log->rdev->bdev; |
| 428 | bio->bi_iter.bi_sector = log->rdev->ppl.sector; |
| 429 | bio_add_page(bio, io->header_page, PAGE_SIZE, 0); |
| 430 | |
| 431 | list_for_each_entry(sh, &io->stripe_list, log_list) { |
| 432 | /* entries for full stripe writes have no partial parity */ |
| 433 | if (test_bit(STRIPE_FULL_WRITE, &sh->state)) |
| 434 | continue; |
| 435 | |
| 436 | if (!bio_add_page(bio, sh->ppl_page, PAGE_SIZE, 0)) { |
| 437 | struct bio *prev = bio; |
| 438 | |
| 439 | bio = bio_alloc_bioset(GFP_NOIO, BIO_MAX_PAGES, |
| 440 | ppl_conf->bs); |
| 441 | bio->bi_opf = prev->bi_opf; |
| 442 | bio->bi_bdev = prev->bi_bdev; |
| 443 | bio->bi_iter.bi_sector = bio_end_sector(prev); |
| 444 | bio_add_page(bio, sh->ppl_page, PAGE_SIZE, 0); |
| 445 | |
| 446 | bio_chain(bio, prev); |
| 447 | ppl_submit_iounit_bio(io, prev); |
| 448 | } |
| 449 | } |
| 450 | |
| 451 | ppl_submit_iounit_bio(io, bio); |
| 452 | } |
| 453 | |
| 454 | static void ppl_submit_current_io(struct ppl_log *log) |
| 455 | { |
| 456 | struct ppl_io_unit *io; |
| 457 | |
| 458 | spin_lock_irq(&log->io_list_lock); |
| 459 | |
| 460 | io = list_first_entry_or_null(&log->io_list, struct ppl_io_unit, |
| 461 | log_sibling); |
| 462 | if (io && io->submitted) |
| 463 | io = NULL; |
| 464 | |
| 465 | spin_unlock_irq(&log->io_list_lock); |
| 466 | |
| 467 | if (io) { |
| 468 | io->submitted = true; |
| 469 | |
| 470 | if (io == log->current_io) |
| 471 | log->current_io = NULL; |
| 472 | |
| 473 | ppl_submit_iounit(io); |
| 474 | } |
| 475 | } |
| 476 | |
| 477 | void ppl_write_stripe_run(struct r5conf *conf) |
| 478 | { |
| 479 | struct ppl_conf *ppl_conf = conf->log_private; |
| 480 | struct ppl_log *log; |
| 481 | int i; |
| 482 | |
| 483 | for (i = 0; i < ppl_conf->count; i++) { |
| 484 | log = &ppl_conf->child_logs[i]; |
| 485 | |
| 486 | mutex_lock(&log->io_mutex); |
| 487 | ppl_submit_current_io(log); |
| 488 | mutex_unlock(&log->io_mutex); |
| 489 | } |
| 490 | } |
| 491 | |
| 492 | static void ppl_io_unit_finished(struct ppl_io_unit *io) |
| 493 | { |
| 494 | struct ppl_log *log = io->log; |
| 495 | unsigned long flags; |
| 496 | |
| 497 | pr_debug("%s: seq: %llu\n", __func__, io->seq); |
| 498 | |
| 499 | spin_lock_irqsave(&log->io_list_lock, flags); |
| 500 | |
| 501 | list_del(&io->log_sibling); |
| 502 | mempool_free(io, log->ppl_conf->io_pool); |
| 503 | |
| 504 | if (!list_empty(&log->no_mem_stripes)) { |
| 505 | struct stripe_head *sh = list_first_entry(&log->no_mem_stripes, |
| 506 | struct stripe_head, |
| 507 | log_list); |
| 508 | list_del_init(&sh->log_list); |
| 509 | set_bit(STRIPE_HANDLE, &sh->state); |
| 510 | raid5_release_stripe(sh); |
| 511 | } |
| 512 | |
| 513 | spin_unlock_irqrestore(&log->io_list_lock, flags); |
| 514 | } |
| 515 | |
| 516 | void ppl_stripe_write_finished(struct stripe_head *sh) |
| 517 | { |
| 518 | struct ppl_io_unit *io; |
| 519 | |
| 520 | io = sh->ppl_io; |
| 521 | sh->ppl_io = NULL; |
| 522 | |
| 523 | if (io && atomic_dec_and_test(&io->pending_stripes)) |
| 524 | ppl_io_unit_finished(io); |
| 525 | } |
| 526 | |
Artur Paszkiewicz | 4536bf9b | 2017-03-09 10:00:01 +0100 | [diff] [blame] | 527 | static void ppl_xor(int size, struct page *page1, struct page *page2) |
| 528 | { |
| 529 | struct async_submit_ctl submit; |
| 530 | struct dma_async_tx_descriptor *tx; |
| 531 | struct page *xor_srcs[] = { page1, page2 }; |
| 532 | |
| 533 | init_async_submit(&submit, ASYNC_TX_ACK|ASYNC_TX_XOR_DROP_DST, |
| 534 | NULL, NULL, NULL, NULL); |
| 535 | tx = async_xor(page1, xor_srcs, 0, 2, size, &submit); |
| 536 | |
| 537 | async_tx_quiesce(&tx); |
| 538 | } |
| 539 | |
| 540 | /* |
| 541 | * PPL recovery strategy: xor partial parity and data from all modified data |
| 542 | * disks within a stripe and write the result as the new stripe parity. If all |
| 543 | * stripe data disks are modified (full stripe write), no partial parity is |
| 544 | * available, so just xor the data disks. |
| 545 | * |
| 546 | * Recovery of a PPL entry shall occur only if all modified data disks are |
| 547 | * available and read from all of them succeeds. |
| 548 | * |
| 549 | * A PPL entry applies to a stripe, partial parity size for an entry is at most |
| 550 | * the size of the chunk. Examples of possible cases for a single entry: |
| 551 | * |
| 552 | * case 0: single data disk write: |
| 553 | * data0 data1 data2 ppl parity |
| 554 | * +--------+--------+--------+ +--------------------+ |
| 555 | * | ------ | ------ | ------ | +----+ | (no change) | |
| 556 | * | ------ | -data- | ------ | | pp | -> | data1 ^ pp | |
| 557 | * | ------ | -data- | ------ | | pp | -> | data1 ^ pp | |
| 558 | * | ------ | ------ | ------ | +----+ | (no change) | |
| 559 | * +--------+--------+--------+ +--------------------+ |
| 560 | * pp_size = data_size |
| 561 | * |
| 562 | * case 1: more than one data disk write: |
| 563 | * data0 data1 data2 ppl parity |
| 564 | * +--------+--------+--------+ +--------------------+ |
| 565 | * | ------ | ------ | ------ | +----+ | (no change) | |
| 566 | * | -data- | -data- | ------ | | pp | -> | data0 ^ data1 ^ pp | |
| 567 | * | -data- | -data- | ------ | | pp | -> | data0 ^ data1 ^ pp | |
| 568 | * | ------ | ------ | ------ | +----+ | (no change) | |
| 569 | * +--------+--------+--------+ +--------------------+ |
| 570 | * pp_size = data_size / modified_data_disks |
| 571 | * |
| 572 | * case 2: write to all data disks (also full stripe write): |
| 573 | * data0 data1 data2 parity |
| 574 | * +--------+--------+--------+ +--------------------+ |
| 575 | * | ------ | ------ | ------ | | (no change) | |
| 576 | * | -data- | -data- | -data- | --------> | xor all data | |
| 577 | * | ------ | ------ | ------ | --------> | (no change) | |
| 578 | * | ------ | ------ | ------ | | (no change) | |
| 579 | * +--------+--------+--------+ +--------------------+ |
| 580 | * pp_size = 0 |
| 581 | * |
| 582 | * The following cases are possible only in other implementations. The recovery |
| 583 | * code can handle them, but they are not generated at runtime because they can |
| 584 | * be reduced to cases 0, 1 and 2: |
| 585 | * |
| 586 | * case 3: |
| 587 | * data0 data1 data2 ppl parity |
| 588 | * +--------+--------+--------+ +----+ +--------------------+ |
| 589 | * | ------ | -data- | -data- | | pp | | data1 ^ data2 ^ pp | |
| 590 | * | ------ | -data- | -data- | | pp | -> | data1 ^ data2 ^ pp | |
| 591 | * | -data- | -data- | -data- | | -- | -> | xor all data | |
| 592 | * | -data- | -data- | ------ | | pp | | data0 ^ data1 ^ pp | |
| 593 | * +--------+--------+--------+ +----+ +--------------------+ |
| 594 | * pp_size = chunk_size |
| 595 | * |
| 596 | * case 4: |
| 597 | * data0 data1 data2 ppl parity |
| 598 | * +--------+--------+--------+ +----+ +--------------------+ |
| 599 | * | ------ | -data- | ------ | | pp | | data1 ^ pp | |
| 600 | * | ------ | ------ | ------ | | -- | -> | (no change) | |
| 601 | * | ------ | ------ | ------ | | -- | -> | (no change) | |
| 602 | * | -data- | ------ | ------ | | pp | | data0 ^ pp | |
| 603 | * +--------+--------+--------+ +----+ +--------------------+ |
| 604 | * pp_size = chunk_size |
| 605 | */ |
| 606 | static int ppl_recover_entry(struct ppl_log *log, struct ppl_header_entry *e, |
| 607 | sector_t ppl_sector) |
| 608 | { |
| 609 | struct ppl_conf *ppl_conf = log->ppl_conf; |
| 610 | struct mddev *mddev = ppl_conf->mddev; |
| 611 | struct r5conf *conf = mddev->private; |
| 612 | int block_size = ppl_conf->block_size; |
| 613 | struct page *page1; |
| 614 | struct page *page2; |
| 615 | sector_t r_sector_first; |
| 616 | sector_t r_sector_last; |
| 617 | int strip_sectors; |
| 618 | int data_disks; |
| 619 | int i; |
| 620 | int ret = 0; |
| 621 | char b[BDEVNAME_SIZE]; |
| 622 | unsigned int pp_size = le32_to_cpu(e->pp_size); |
| 623 | unsigned int data_size = le32_to_cpu(e->data_size); |
| 624 | |
| 625 | page1 = alloc_page(GFP_KERNEL); |
| 626 | page2 = alloc_page(GFP_KERNEL); |
| 627 | |
| 628 | if (!page1 || !page2) { |
| 629 | ret = -ENOMEM; |
| 630 | goto out; |
| 631 | } |
| 632 | |
| 633 | r_sector_first = le64_to_cpu(e->data_sector) * (block_size >> 9); |
| 634 | |
| 635 | if ((pp_size >> 9) < conf->chunk_sectors) { |
| 636 | if (pp_size > 0) { |
| 637 | data_disks = data_size / pp_size; |
| 638 | strip_sectors = pp_size >> 9; |
| 639 | } else { |
| 640 | data_disks = conf->raid_disks - conf->max_degraded; |
| 641 | strip_sectors = (data_size >> 9) / data_disks; |
| 642 | } |
| 643 | r_sector_last = r_sector_first + |
| 644 | (data_disks - 1) * conf->chunk_sectors + |
| 645 | strip_sectors; |
| 646 | } else { |
| 647 | data_disks = conf->raid_disks - conf->max_degraded; |
| 648 | strip_sectors = conf->chunk_sectors; |
| 649 | r_sector_last = r_sector_first + (data_size >> 9); |
| 650 | } |
| 651 | |
| 652 | pr_debug("%s: array sector first: %llu last: %llu\n", __func__, |
| 653 | (unsigned long long)r_sector_first, |
| 654 | (unsigned long long)r_sector_last); |
| 655 | |
| 656 | /* if start and end is 4k aligned, use a 4k block */ |
| 657 | if (block_size == 512 && |
| 658 | (r_sector_first & (STRIPE_SECTORS - 1)) == 0 && |
| 659 | (r_sector_last & (STRIPE_SECTORS - 1)) == 0) |
| 660 | block_size = STRIPE_SIZE; |
| 661 | |
| 662 | /* iterate through blocks in strip */ |
| 663 | for (i = 0; i < strip_sectors; i += (block_size >> 9)) { |
| 664 | bool update_parity = false; |
| 665 | sector_t parity_sector; |
| 666 | struct md_rdev *parity_rdev; |
| 667 | struct stripe_head sh; |
| 668 | int disk; |
| 669 | int indent = 0; |
| 670 | |
| 671 | pr_debug("%s:%*s iter %d start\n", __func__, indent, "", i); |
| 672 | indent += 2; |
| 673 | |
| 674 | memset(page_address(page1), 0, PAGE_SIZE); |
| 675 | |
| 676 | /* iterate through data member disks */ |
| 677 | for (disk = 0; disk < data_disks; disk++) { |
| 678 | int dd_idx; |
| 679 | struct md_rdev *rdev; |
| 680 | sector_t sector; |
| 681 | sector_t r_sector = r_sector_first + i + |
| 682 | (disk * conf->chunk_sectors); |
| 683 | |
| 684 | pr_debug("%s:%*s data member disk %d start\n", |
| 685 | __func__, indent, "", disk); |
| 686 | indent += 2; |
| 687 | |
| 688 | if (r_sector >= r_sector_last) { |
| 689 | pr_debug("%s:%*s array sector %llu doesn't need parity update\n", |
| 690 | __func__, indent, "", |
| 691 | (unsigned long long)r_sector); |
| 692 | indent -= 2; |
| 693 | continue; |
| 694 | } |
| 695 | |
| 696 | update_parity = true; |
| 697 | |
| 698 | /* map raid sector to member disk */ |
| 699 | sector = raid5_compute_sector(conf, r_sector, 0, |
| 700 | &dd_idx, NULL); |
| 701 | pr_debug("%s:%*s processing array sector %llu => data member disk %d, sector %llu\n", |
| 702 | __func__, indent, "", |
| 703 | (unsigned long long)r_sector, dd_idx, |
| 704 | (unsigned long long)sector); |
| 705 | |
| 706 | rdev = conf->disks[dd_idx].rdev; |
| 707 | if (!rdev) { |
| 708 | pr_debug("%s:%*s data member disk %d missing\n", |
| 709 | __func__, indent, "", dd_idx); |
| 710 | update_parity = false; |
| 711 | break; |
| 712 | } |
| 713 | |
| 714 | pr_debug("%s:%*s reading data member disk %s sector %llu\n", |
| 715 | __func__, indent, "", bdevname(rdev->bdev, b), |
| 716 | (unsigned long long)sector); |
| 717 | if (!sync_page_io(rdev, sector, block_size, page2, |
| 718 | REQ_OP_READ, 0, false)) { |
| 719 | md_error(mddev, rdev); |
| 720 | pr_debug("%s:%*s read failed!\n", __func__, |
| 721 | indent, ""); |
| 722 | ret = -EIO; |
| 723 | goto out; |
| 724 | } |
| 725 | |
| 726 | ppl_xor(block_size, page1, page2); |
| 727 | |
| 728 | indent -= 2; |
| 729 | } |
| 730 | |
| 731 | if (!update_parity) |
| 732 | continue; |
| 733 | |
| 734 | if (pp_size > 0) { |
| 735 | pr_debug("%s:%*s reading pp disk sector %llu\n", |
| 736 | __func__, indent, "", |
| 737 | (unsigned long long)(ppl_sector + i)); |
| 738 | if (!sync_page_io(log->rdev, |
| 739 | ppl_sector - log->rdev->data_offset + i, |
| 740 | block_size, page2, REQ_OP_READ, 0, |
| 741 | false)) { |
| 742 | pr_debug("%s:%*s read failed!\n", __func__, |
| 743 | indent, ""); |
| 744 | md_error(mddev, log->rdev); |
| 745 | ret = -EIO; |
| 746 | goto out; |
| 747 | } |
| 748 | |
| 749 | ppl_xor(block_size, page1, page2); |
| 750 | } |
| 751 | |
| 752 | /* map raid sector to parity disk */ |
| 753 | parity_sector = raid5_compute_sector(conf, r_sector_first + i, |
| 754 | 0, &disk, &sh); |
| 755 | BUG_ON(sh.pd_idx != le32_to_cpu(e->parity_disk)); |
| 756 | parity_rdev = conf->disks[sh.pd_idx].rdev; |
| 757 | |
| 758 | BUG_ON(parity_rdev->bdev->bd_dev != log->rdev->bdev->bd_dev); |
| 759 | pr_debug("%s:%*s write parity at sector %llu, disk %s\n", |
| 760 | __func__, indent, "", |
| 761 | (unsigned long long)parity_sector, |
| 762 | bdevname(parity_rdev->bdev, b)); |
| 763 | if (!sync_page_io(parity_rdev, parity_sector, block_size, |
| 764 | page1, REQ_OP_WRITE, 0, false)) { |
| 765 | pr_debug("%s:%*s parity write error!\n", __func__, |
| 766 | indent, ""); |
| 767 | md_error(mddev, parity_rdev); |
| 768 | ret = -EIO; |
| 769 | goto out; |
| 770 | } |
| 771 | } |
| 772 | out: |
| 773 | if (page1) |
| 774 | __free_page(page1); |
| 775 | if (page2) |
| 776 | __free_page(page2); |
| 777 | return ret; |
| 778 | } |
| 779 | |
| 780 | static int ppl_recover(struct ppl_log *log, struct ppl_header *pplhdr) |
| 781 | { |
| 782 | struct ppl_conf *ppl_conf = log->ppl_conf; |
| 783 | struct md_rdev *rdev = log->rdev; |
| 784 | struct mddev *mddev = rdev->mddev; |
| 785 | sector_t ppl_sector = rdev->ppl.sector + (PPL_HEADER_SIZE >> 9); |
| 786 | struct page *page; |
| 787 | int i; |
| 788 | int ret = 0; |
| 789 | |
| 790 | page = alloc_page(GFP_KERNEL); |
| 791 | if (!page) |
| 792 | return -ENOMEM; |
| 793 | |
| 794 | /* iterate through all PPL entries saved */ |
| 795 | for (i = 0; i < le32_to_cpu(pplhdr->entries_count); i++) { |
| 796 | struct ppl_header_entry *e = &pplhdr->entries[i]; |
| 797 | u32 pp_size = le32_to_cpu(e->pp_size); |
| 798 | sector_t sector = ppl_sector; |
| 799 | int ppl_entry_sectors = pp_size >> 9; |
| 800 | u32 crc, crc_stored; |
| 801 | |
| 802 | pr_debug("%s: disk: %d entry: %d ppl_sector: %llu pp_size: %u\n", |
| 803 | __func__, rdev->raid_disk, i, |
| 804 | (unsigned long long)ppl_sector, pp_size); |
| 805 | |
| 806 | crc = ~0; |
| 807 | crc_stored = le32_to_cpu(e->checksum); |
| 808 | |
| 809 | /* read parial parity for this entry and calculate its checksum */ |
| 810 | while (pp_size) { |
| 811 | int s = pp_size > PAGE_SIZE ? PAGE_SIZE : pp_size; |
| 812 | |
| 813 | if (!sync_page_io(rdev, sector - rdev->data_offset, |
| 814 | s, page, REQ_OP_READ, 0, false)) { |
| 815 | md_error(mddev, rdev); |
| 816 | ret = -EIO; |
| 817 | goto out; |
| 818 | } |
| 819 | |
| 820 | crc = crc32c_le(crc, page_address(page), s); |
| 821 | |
| 822 | pp_size -= s; |
| 823 | sector += s >> 9; |
| 824 | } |
| 825 | |
| 826 | crc = ~crc; |
| 827 | |
| 828 | if (crc != crc_stored) { |
| 829 | /* |
| 830 | * Don't recover this entry if the checksum does not |
| 831 | * match, but keep going and try to recover other |
| 832 | * entries. |
| 833 | */ |
| 834 | pr_debug("%s: ppl entry crc does not match: stored: 0x%x calculated: 0x%x\n", |
| 835 | __func__, crc_stored, crc); |
| 836 | ppl_conf->mismatch_count++; |
| 837 | } else { |
| 838 | ret = ppl_recover_entry(log, e, ppl_sector); |
| 839 | if (ret) |
| 840 | goto out; |
| 841 | ppl_conf->recovered_entries++; |
| 842 | } |
| 843 | |
| 844 | ppl_sector += ppl_entry_sectors; |
| 845 | } |
| 846 | |
| 847 | /* flush the disk cache after recovery if necessary */ |
| 848 | ret = blkdev_issue_flush(rdev->bdev, GFP_KERNEL, NULL); |
| 849 | out: |
| 850 | __free_page(page); |
| 851 | return ret; |
| 852 | } |
| 853 | |
| 854 | static int ppl_write_empty_header(struct ppl_log *log) |
| 855 | { |
| 856 | struct page *page; |
| 857 | struct ppl_header *pplhdr; |
| 858 | struct md_rdev *rdev = log->rdev; |
| 859 | int ret = 0; |
| 860 | |
| 861 | pr_debug("%s: disk: %d ppl_sector: %llu\n", __func__, |
| 862 | rdev->raid_disk, (unsigned long long)rdev->ppl.sector); |
| 863 | |
| 864 | page = alloc_page(GFP_NOIO | __GFP_ZERO); |
| 865 | if (!page) |
| 866 | return -ENOMEM; |
| 867 | |
| 868 | pplhdr = page_address(page); |
| 869 | memset(pplhdr->reserved, 0xff, PPL_HDR_RESERVED); |
| 870 | pplhdr->signature = cpu_to_le32(log->ppl_conf->signature); |
| 871 | pplhdr->checksum = cpu_to_le32(~crc32c_le(~0, pplhdr, PAGE_SIZE)); |
| 872 | |
| 873 | if (!sync_page_io(rdev, rdev->ppl.sector - rdev->data_offset, |
| 874 | PPL_HEADER_SIZE, page, REQ_OP_WRITE | REQ_FUA, 0, |
| 875 | false)) { |
| 876 | md_error(rdev->mddev, rdev); |
| 877 | ret = -EIO; |
| 878 | } |
| 879 | |
| 880 | __free_page(page); |
| 881 | return ret; |
| 882 | } |
| 883 | |
| 884 | static int ppl_load_distributed(struct ppl_log *log) |
| 885 | { |
| 886 | struct ppl_conf *ppl_conf = log->ppl_conf; |
| 887 | struct md_rdev *rdev = log->rdev; |
| 888 | struct mddev *mddev = rdev->mddev; |
| 889 | struct page *page; |
| 890 | struct ppl_header *pplhdr; |
| 891 | u32 crc, crc_stored; |
| 892 | u32 signature; |
| 893 | int ret = 0; |
| 894 | |
| 895 | pr_debug("%s: disk: %d\n", __func__, rdev->raid_disk); |
| 896 | |
| 897 | /* read PPL header */ |
| 898 | page = alloc_page(GFP_KERNEL); |
| 899 | if (!page) |
| 900 | return -ENOMEM; |
| 901 | |
| 902 | if (!sync_page_io(rdev, rdev->ppl.sector - rdev->data_offset, |
| 903 | PAGE_SIZE, page, REQ_OP_READ, 0, false)) { |
| 904 | md_error(mddev, rdev); |
| 905 | ret = -EIO; |
| 906 | goto out; |
| 907 | } |
| 908 | pplhdr = page_address(page); |
| 909 | |
| 910 | /* check header validity */ |
| 911 | crc_stored = le32_to_cpu(pplhdr->checksum); |
| 912 | pplhdr->checksum = 0; |
| 913 | crc = ~crc32c_le(~0, pplhdr, PAGE_SIZE); |
| 914 | |
| 915 | if (crc_stored != crc) { |
| 916 | pr_debug("%s: ppl header crc does not match: stored: 0x%x calculated: 0x%x\n", |
| 917 | __func__, crc_stored, crc); |
| 918 | ppl_conf->mismatch_count++; |
| 919 | goto out; |
| 920 | } |
| 921 | |
| 922 | signature = le32_to_cpu(pplhdr->signature); |
| 923 | |
| 924 | if (mddev->external) { |
| 925 | /* |
| 926 | * For external metadata the header signature is set and |
| 927 | * validated in userspace. |
| 928 | */ |
| 929 | ppl_conf->signature = signature; |
| 930 | } else if (ppl_conf->signature != signature) { |
| 931 | pr_debug("%s: ppl header signature does not match: stored: 0x%x configured: 0x%x\n", |
| 932 | __func__, signature, ppl_conf->signature); |
| 933 | ppl_conf->mismatch_count++; |
| 934 | goto out; |
| 935 | } |
| 936 | |
| 937 | /* attempt to recover from log if we are starting a dirty array */ |
| 938 | if (!mddev->pers && mddev->recovery_cp != MaxSector) |
| 939 | ret = ppl_recover(log, pplhdr); |
| 940 | out: |
| 941 | /* write empty header if we are starting the array */ |
| 942 | if (!ret && !mddev->pers) |
| 943 | ret = ppl_write_empty_header(log); |
| 944 | |
| 945 | __free_page(page); |
| 946 | |
| 947 | pr_debug("%s: return: %d mismatch_count: %d recovered_entries: %d\n", |
| 948 | __func__, ret, ppl_conf->mismatch_count, |
| 949 | ppl_conf->recovered_entries); |
| 950 | return ret; |
| 951 | } |
| 952 | |
| 953 | static int ppl_load(struct ppl_conf *ppl_conf) |
| 954 | { |
| 955 | int ret = 0; |
| 956 | u32 signature = 0; |
| 957 | bool signature_set = false; |
| 958 | int i; |
| 959 | |
| 960 | for (i = 0; i < ppl_conf->count; i++) { |
| 961 | struct ppl_log *log = &ppl_conf->child_logs[i]; |
| 962 | |
| 963 | /* skip missing drive */ |
| 964 | if (!log->rdev) |
| 965 | continue; |
| 966 | |
| 967 | ret = ppl_load_distributed(log); |
| 968 | if (ret) |
| 969 | break; |
| 970 | |
| 971 | /* |
| 972 | * For external metadata we can't check if the signature is |
| 973 | * correct on a single drive, but we can check if it is the same |
| 974 | * on all drives. |
| 975 | */ |
| 976 | if (ppl_conf->mddev->external) { |
| 977 | if (!signature_set) { |
| 978 | signature = ppl_conf->signature; |
| 979 | signature_set = true; |
| 980 | } else if (signature != ppl_conf->signature) { |
| 981 | pr_warn("md/raid:%s: PPL header signature does not match on all member drives\n", |
| 982 | mdname(ppl_conf->mddev)); |
| 983 | ret = -EINVAL; |
| 984 | break; |
| 985 | } |
| 986 | } |
| 987 | } |
| 988 | |
| 989 | pr_debug("%s: return: %d mismatch_count: %d recovered_entries: %d\n", |
| 990 | __func__, ret, ppl_conf->mismatch_count, |
| 991 | ppl_conf->recovered_entries); |
| 992 | return ret; |
| 993 | } |
| 994 | |
Artur Paszkiewicz | 3418d03 | 2017-03-09 09:59:59 +0100 | [diff] [blame] | 995 | static void __ppl_exit_log(struct ppl_conf *ppl_conf) |
| 996 | { |
| 997 | clear_bit(MD_HAS_PPL, &ppl_conf->mddev->flags); |
| 998 | |
| 999 | kfree(ppl_conf->child_logs); |
| 1000 | |
| 1001 | mempool_destroy(ppl_conf->meta_pool); |
| 1002 | if (ppl_conf->bs) |
| 1003 | bioset_free(ppl_conf->bs); |
| 1004 | mempool_destroy(ppl_conf->io_pool); |
| 1005 | kmem_cache_destroy(ppl_conf->io_kc); |
| 1006 | |
| 1007 | kfree(ppl_conf); |
| 1008 | } |
| 1009 | |
| 1010 | void ppl_exit_log(struct r5conf *conf) |
| 1011 | { |
| 1012 | struct ppl_conf *ppl_conf = conf->log_private; |
| 1013 | |
| 1014 | if (ppl_conf) { |
| 1015 | __ppl_exit_log(ppl_conf); |
| 1016 | conf->log_private = NULL; |
| 1017 | } |
| 1018 | } |
| 1019 | |
| 1020 | static int ppl_validate_rdev(struct md_rdev *rdev) |
| 1021 | { |
| 1022 | char b[BDEVNAME_SIZE]; |
| 1023 | int ppl_data_sectors; |
| 1024 | int ppl_size_new; |
| 1025 | |
| 1026 | /* |
| 1027 | * The configured PPL size must be enough to store |
| 1028 | * the header and (at the very least) partial parity |
| 1029 | * for one stripe. Round it down to ensure the data |
| 1030 | * space is cleanly divisible by stripe size. |
| 1031 | */ |
| 1032 | ppl_data_sectors = rdev->ppl.size - (PPL_HEADER_SIZE >> 9); |
| 1033 | |
| 1034 | if (ppl_data_sectors > 0) |
| 1035 | ppl_data_sectors = rounddown(ppl_data_sectors, STRIPE_SECTORS); |
| 1036 | |
| 1037 | if (ppl_data_sectors <= 0) { |
| 1038 | pr_warn("md/raid:%s: PPL space too small on %s\n", |
| 1039 | mdname(rdev->mddev), bdevname(rdev->bdev, b)); |
| 1040 | return -ENOSPC; |
| 1041 | } |
| 1042 | |
| 1043 | ppl_size_new = ppl_data_sectors + (PPL_HEADER_SIZE >> 9); |
| 1044 | |
| 1045 | if ((rdev->ppl.sector < rdev->data_offset && |
| 1046 | rdev->ppl.sector + ppl_size_new > rdev->data_offset) || |
| 1047 | (rdev->ppl.sector >= rdev->data_offset && |
| 1048 | rdev->data_offset + rdev->sectors > rdev->ppl.sector)) { |
| 1049 | pr_warn("md/raid:%s: PPL space overlaps with data on %s\n", |
| 1050 | mdname(rdev->mddev), bdevname(rdev->bdev, b)); |
| 1051 | return -EINVAL; |
| 1052 | } |
| 1053 | |
| 1054 | if (!rdev->mddev->external && |
| 1055 | ((rdev->ppl.offset > 0 && rdev->ppl.offset < (rdev->sb_size >> 9)) || |
| 1056 | (rdev->ppl.offset <= 0 && rdev->ppl.offset + ppl_size_new > 0))) { |
| 1057 | pr_warn("md/raid:%s: PPL space overlaps with superblock on %s\n", |
| 1058 | mdname(rdev->mddev), bdevname(rdev->bdev, b)); |
| 1059 | return -EINVAL; |
| 1060 | } |
| 1061 | |
| 1062 | rdev->ppl.size = ppl_size_new; |
| 1063 | |
| 1064 | return 0; |
| 1065 | } |
| 1066 | |
| 1067 | int ppl_init_log(struct r5conf *conf) |
| 1068 | { |
| 1069 | struct ppl_conf *ppl_conf; |
| 1070 | struct mddev *mddev = conf->mddev; |
| 1071 | int ret = 0; |
| 1072 | int i; |
| 1073 | bool need_cache_flush; |
| 1074 | |
| 1075 | pr_debug("md/raid:%s: enabling distributed Partial Parity Log\n", |
| 1076 | mdname(conf->mddev)); |
| 1077 | |
| 1078 | if (PAGE_SIZE != 4096) |
| 1079 | return -EINVAL; |
| 1080 | |
| 1081 | if (mddev->level != 5) { |
| 1082 | pr_warn("md/raid:%s PPL is not compatible with raid level %d\n", |
| 1083 | mdname(mddev), mddev->level); |
| 1084 | return -EINVAL; |
| 1085 | } |
| 1086 | |
| 1087 | if (mddev->bitmap_info.file || mddev->bitmap_info.offset) { |
| 1088 | pr_warn("md/raid:%s PPL is not compatible with bitmap\n", |
| 1089 | mdname(mddev)); |
| 1090 | return -EINVAL; |
| 1091 | } |
| 1092 | |
| 1093 | if (test_bit(MD_HAS_JOURNAL, &mddev->flags)) { |
| 1094 | pr_warn("md/raid:%s PPL is not compatible with journal\n", |
| 1095 | mdname(mddev)); |
| 1096 | return -EINVAL; |
| 1097 | } |
| 1098 | |
| 1099 | ppl_conf = kzalloc(sizeof(struct ppl_conf), GFP_KERNEL); |
| 1100 | if (!ppl_conf) |
| 1101 | return -ENOMEM; |
| 1102 | |
| 1103 | ppl_conf->mddev = mddev; |
| 1104 | |
| 1105 | ppl_conf->io_kc = KMEM_CACHE(ppl_io_unit, 0); |
| 1106 | if (!ppl_conf->io_kc) { |
| 1107 | ret = -EINVAL; |
| 1108 | goto err; |
| 1109 | } |
| 1110 | |
| 1111 | ppl_conf->io_pool = mempool_create_slab_pool(conf->raid_disks, ppl_conf->io_kc); |
| 1112 | if (!ppl_conf->io_pool) { |
| 1113 | ret = -EINVAL; |
| 1114 | goto err; |
| 1115 | } |
| 1116 | |
| 1117 | ppl_conf->bs = bioset_create(conf->raid_disks, 0); |
| 1118 | if (!ppl_conf->bs) { |
| 1119 | ret = -EINVAL; |
| 1120 | goto err; |
| 1121 | } |
| 1122 | |
| 1123 | ppl_conf->meta_pool = mempool_create_page_pool(conf->raid_disks, 0); |
| 1124 | if (!ppl_conf->meta_pool) { |
| 1125 | ret = -EINVAL; |
| 1126 | goto err; |
| 1127 | } |
| 1128 | |
| 1129 | ppl_conf->count = conf->raid_disks; |
| 1130 | ppl_conf->child_logs = kcalloc(ppl_conf->count, sizeof(struct ppl_log), |
| 1131 | GFP_KERNEL); |
| 1132 | if (!ppl_conf->child_logs) { |
| 1133 | ret = -ENOMEM; |
| 1134 | goto err; |
| 1135 | } |
| 1136 | |
| 1137 | atomic64_set(&ppl_conf->seq, 0); |
| 1138 | |
| 1139 | if (!mddev->external) { |
| 1140 | ppl_conf->signature = ~crc32c_le(~0, mddev->uuid, sizeof(mddev->uuid)); |
| 1141 | ppl_conf->block_size = 512; |
| 1142 | } else { |
| 1143 | ppl_conf->block_size = queue_logical_block_size(mddev->queue); |
| 1144 | } |
| 1145 | |
| 1146 | for (i = 0; i < ppl_conf->count; i++) { |
| 1147 | struct ppl_log *log = &ppl_conf->child_logs[i]; |
| 1148 | struct md_rdev *rdev = conf->disks[i].rdev; |
| 1149 | |
| 1150 | mutex_init(&log->io_mutex); |
| 1151 | spin_lock_init(&log->io_list_lock); |
| 1152 | INIT_LIST_HEAD(&log->io_list); |
| 1153 | INIT_LIST_HEAD(&log->no_mem_stripes); |
| 1154 | |
| 1155 | log->ppl_conf = ppl_conf; |
| 1156 | log->rdev = rdev; |
| 1157 | |
| 1158 | if (rdev) { |
| 1159 | struct request_queue *q; |
| 1160 | |
| 1161 | ret = ppl_validate_rdev(rdev); |
| 1162 | if (ret) |
| 1163 | goto err; |
| 1164 | |
| 1165 | q = bdev_get_queue(rdev->bdev); |
| 1166 | if (test_bit(QUEUE_FLAG_WC, &q->queue_flags)) |
| 1167 | need_cache_flush = true; |
| 1168 | } |
| 1169 | } |
| 1170 | |
| 1171 | if (need_cache_flush) |
| 1172 | pr_warn("md/raid:%s: Volatile write-back cache should be disabled on all member drives when using PPL!\n", |
| 1173 | mdname(mddev)); |
| 1174 | |
Artur Paszkiewicz | 4536bf9b | 2017-03-09 10:00:01 +0100 | [diff] [blame] | 1175 | /* load and possibly recover the logs from the member disks */ |
| 1176 | ret = ppl_load(ppl_conf); |
| 1177 | |
| 1178 | if (ret) { |
| 1179 | goto err; |
| 1180 | } else if (!mddev->pers && |
| 1181 | mddev->recovery_cp == 0 && !mddev->degraded && |
| 1182 | ppl_conf->recovered_entries > 0 && |
| 1183 | ppl_conf->mismatch_count == 0) { |
| 1184 | /* |
| 1185 | * If we are starting a dirty array and the recovery succeeds |
| 1186 | * without any issues, set the array as clean. |
| 1187 | */ |
| 1188 | mddev->recovery_cp = MaxSector; |
| 1189 | set_bit(MD_SB_CHANGE_CLEAN, &mddev->sb_flags); |
Artur Paszkiewicz | ba903a3 | 2017-03-09 10:00:03 +0100 | [diff] [blame^] | 1190 | } else if (mddev->pers && ppl_conf->mismatch_count > 0) { |
| 1191 | /* no mismatch allowed when enabling PPL for a running array */ |
| 1192 | ret = -EINVAL; |
| 1193 | goto err; |
Artur Paszkiewicz | 4536bf9b | 2017-03-09 10:00:01 +0100 | [diff] [blame] | 1194 | } |
| 1195 | |
Artur Paszkiewicz | 3418d03 | 2017-03-09 09:59:59 +0100 | [diff] [blame] | 1196 | conf->log_private = ppl_conf; |
| 1197 | |
| 1198 | return 0; |
| 1199 | err: |
| 1200 | __ppl_exit_log(ppl_conf); |
| 1201 | return ret; |
| 1202 | } |
Artur Paszkiewicz | 6358c23 | 2017-03-09 10:00:02 +0100 | [diff] [blame] | 1203 | |
| 1204 | int ppl_modify_log(struct r5conf *conf, struct md_rdev *rdev, bool add) |
| 1205 | { |
| 1206 | struct ppl_conf *ppl_conf = conf->log_private; |
| 1207 | struct ppl_log *log; |
| 1208 | int ret = 0; |
| 1209 | char b[BDEVNAME_SIZE]; |
| 1210 | |
| 1211 | if (!rdev) |
| 1212 | return -EINVAL; |
| 1213 | |
| 1214 | pr_debug("%s: disk: %d operation: %s dev: %s\n", |
| 1215 | __func__, rdev->raid_disk, add ? "add" : "remove", |
| 1216 | bdevname(rdev->bdev, b)); |
| 1217 | |
| 1218 | if (rdev->raid_disk < 0) |
| 1219 | return 0; |
| 1220 | |
| 1221 | if (rdev->raid_disk >= ppl_conf->count) |
| 1222 | return -ENODEV; |
| 1223 | |
| 1224 | log = &ppl_conf->child_logs[rdev->raid_disk]; |
| 1225 | |
| 1226 | mutex_lock(&log->io_mutex); |
| 1227 | if (add) { |
| 1228 | ret = ppl_validate_rdev(rdev); |
| 1229 | if (!ret) { |
| 1230 | log->rdev = rdev; |
| 1231 | ret = ppl_write_empty_header(log); |
| 1232 | } |
| 1233 | } else { |
| 1234 | log->rdev = NULL; |
| 1235 | } |
| 1236 | mutex_unlock(&log->io_mutex); |
| 1237 | |
| 1238 | return ret; |
| 1239 | } |