blob: 671909d8672eb994ab4c639b76612efdb7d4f210 [file] [log] [blame]
Neil Armstrongbbbe7752016-11-10 15:29:37 +01001/*
2 * Copyright (C) 2016 BayLibre, SAS
3 * Author: Neil Armstrong <narmstrong@baylibre.com>
4 * Copyright (C) 2015 Amlogic, Inc. All rights reserved.
5 * Copyright (C) 2014 Endless Mobile
6 *
7 * This program is free software; you can redistribute it and/or
8 * modify it under the terms of the GNU General Public License as
9 * published by the Free Software Foundation; either version 2 of the
10 * License, or (at your option) any later version.
11 *
12 * This program is distributed in the hope that it will be useful, but
13 * WITHOUT ANY WARRANTY; without even the implied warranty of
14 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
15 * General Public License for more details.
16 *
17 * You should have received a copy of the GNU General Public License
18 * along with this program; if not, see <http://www.gnu.org/licenses/>.
19 */
20
21#include <linux/kernel.h>
22#include <linux/module.h>
23#include <drm/drmP.h>
24#include "meson_drv.h"
25#include "meson_vpp.h"
26#include "meson_registers.h"
27
28/*
29 * VPP Handles all the Post Processing after the Scanout from the VIU
30 * We handle the following post processings :
31 * - Postblend : Blends the OSD1 only
32 * We exclude OSD2, VS1, VS1 and Preblend output
33 * - Vertical OSD Scaler for OSD1 only, we disable vertical scaler and
34 * use it only for interlace scanout
35 * - Intermediate FIFO with default Amlogic values
36 *
37 * What is missing :
38 * - Preblend for video overlay pre-scaling
39 * - OSD2 support for cursor framebuffer
40 * - Video pre-scaling before postblend
41 * - Full Vertical/Horizontal OSD scaling to support TV overscan
42 * - HDR conversion
43 */
44
45void meson_vpp_setup_mux(struct meson_drm *priv, unsigned int mux)
46{
47 writel(mux, priv->io_base + _REG(VPU_VIU_VENC_MUX_CTRL));
48}
49
50/*
51 * When the output is interlaced, the OSD must switch between
52 * each field using the INTERLACE_SEL_ODD (0) of VIU_OSD1_BLK0_CFG_W0
53 * at each vsync.
54 * But the vertical scaler can provide such funtionnality if
55 * is configured for 2:1 scaling with interlace options enabled.
56 */
57void meson_vpp_setup_interlace_vscaler_osd1(struct meson_drm *priv,
58 struct drm_rect *input)
59{
60 writel_relaxed(BIT(3) /* Enable scaler */ |
61 BIT(2), /* Select OSD1 */
62 priv->io_base + _REG(VPP_OSD_SC_CTRL0));
63
64 writel_relaxed(((drm_rect_width(input) - 1) << 16) |
65 (drm_rect_height(input) - 1),
66 priv->io_base + _REG(VPP_OSD_SCI_WH_M1));
67 /* 2:1 scaling */
68 writel_relaxed(((input->x1) << 16) | (input->x2),
69 priv->io_base + _REG(VPP_OSD_SCO_H_START_END));
70 writel_relaxed(((input->y1 >> 1) << 16) | (input->y2 >> 1),
71 priv->io_base + _REG(VPP_OSD_SCO_V_START_END));
72
73 /* 2:1 scaling values */
74 writel_relaxed(BIT(16), priv->io_base + _REG(VPP_OSD_VSC_INI_PHASE));
75 writel_relaxed(BIT(25), priv->io_base + _REG(VPP_OSD_VSC_PHASE_STEP));
76
77 writel_relaxed(0, priv->io_base + _REG(VPP_OSD_HSC_CTRL0));
78
79 writel_relaxed((4 << 0) /* osd_vsc_bank_length */ |
80 (4 << 3) /* osd_vsc_top_ini_rcv_num0 */ |
81 (1 << 8) /* osd_vsc_top_rpt_p0_num0 */ |
82 (6 << 11) /* osd_vsc_bot_ini_rcv_num0 */ |
83 (2 << 16) /* osd_vsc_bot_rpt_p0_num0 */ |
84 BIT(23) /* osd_prog_interlace */ |
85 BIT(24), /* Enable vertical scaler */
86 priv->io_base + _REG(VPP_OSD_VSC_CTRL0));
87}
88
89void meson_vpp_disable_interlace_vscaler_osd1(struct meson_drm *priv)
90{
91 writel_relaxed(0, priv->io_base + _REG(VPP_OSD_SC_CTRL0));
92 writel_relaxed(0, priv->io_base + _REG(VPP_OSD_VSC_CTRL0));
93 writel_relaxed(0, priv->io_base + _REG(VPP_OSD_HSC_CTRL0));
94}
95
96static unsigned int vpp_filter_coefs_4point_bspline[] = {
97 0x15561500, 0x14561600, 0x13561700, 0x12561800,
98 0x11551a00, 0x11541b00, 0x10541c00, 0x0f541d00,
99 0x0f531e00, 0x0e531f00, 0x0d522100, 0x0c522200,
100 0x0b522300, 0x0b512400, 0x0a502600, 0x0a4f2700,
101 0x094e2900, 0x084e2a00, 0x084d2b00, 0x074c2c01,
102 0x074b2d01, 0x064a2f01, 0x06493001, 0x05483201,
103 0x05473301, 0x05463401, 0x04453601, 0x04433702,
104 0x04423802, 0x03413a02, 0x03403b02, 0x033f3c02,
105 0x033d3d03
106};
107
108static void meson_vpp_write_scaling_filter_coefs(struct meson_drm *priv,
109 const unsigned int *coefs,
110 bool is_horizontal)
111{
112 int i;
113
114 writel_relaxed(is_horizontal ? BIT(8) : 0,
115 priv->io_base + _REG(VPP_OSD_SCALE_COEF_IDX));
116 for (i = 0; i < 33; i++)
117 writel_relaxed(coefs[i],
118 priv->io_base + _REG(VPP_OSD_SCALE_COEF));
119}
120
121void meson_vpp_init(struct meson_drm *priv)
122{
123 /* set dummy data default YUV black */
124 if (meson_vpu_is_compatible(priv, "amlogic,meson-gxl-vpu"))
125 writel_relaxed(0x108080, priv->io_base + _REG(VPP_DUMMY_DATA1));
126 else if (meson_vpu_is_compatible(priv, "amlogic,meson-gxm-vpu")) {
127 writel_bits_relaxed(0xff << 16, 0xff << 16,
128 priv->io_base + _REG(VIU_MISC_CTRL1));
129 writel_relaxed(0x20000, priv->io_base + _REG(VPP_DOLBY_CTRL));
130 writel_relaxed(0x1020080,
131 priv->io_base + _REG(VPP_DUMMY_DATA1));
132 }
133
134 /* Initialize vpu fifo control registers */
135 writel_relaxed(readl_relaxed(priv->io_base + _REG(VPP_OFIFO_SIZE)) |
136 0x77f, priv->io_base + _REG(VPP_OFIFO_SIZE));
137 writel_relaxed(0x08080808, priv->io_base + _REG(VPP_HOLD_LINES));
138
139 /* Turn off preblend */
140 writel_bits_relaxed(VPP_PREBLEND_ENABLE, 0,
141 priv->io_base + _REG(VPP_MISC));
142
143 /* Turn off POSTBLEND */
144 writel_bits_relaxed(VPP_POSTBLEND_ENABLE, 0,
145 priv->io_base + _REG(VPP_MISC));
146
147 /* Force all planes off */
148 writel_bits_relaxed(VPP_OSD1_POSTBLEND | VPP_OSD2_POSTBLEND |
149 VPP_VD1_POSTBLEND | VPP_VD2_POSTBLEND, 0,
150 priv->io_base + _REG(VPP_MISC));
151
152 /* Disable Scalers */
153 writel_relaxed(0, priv->io_base + _REG(VPP_OSD_SC_CTRL0));
154 writel_relaxed(0, priv->io_base + _REG(VPP_OSD_VSC_CTRL0));
155 writel_relaxed(0, priv->io_base + _REG(VPP_OSD_HSC_CTRL0));
156
157 /* Write in the proper filter coefficients. */
158 meson_vpp_write_scaling_filter_coefs(priv,
159 vpp_filter_coefs_4point_bspline, false);
160 meson_vpp_write_scaling_filter_coefs(priv,
161 vpp_filter_coefs_4point_bspline, true);
162}