Roland Stigge | 2265efe | 2012-04-29 16:47:03 +0200 | [diff] [blame] | 1 | * OHCI controller, NXP ohci-nxp variant |
| 2 | |
| 3 | Required properties: |
| 4 | - compatible: must be "nxp,ohci-nxp" |
| 5 | - reg: physical base address of the controller and length of memory mapped |
| 6 | region. |
| 7 | - interrupts: The OHCI interrupt |
Roland Stigge | 73108aa | 2012-04-29 16:47:06 +0200 | [diff] [blame] | 8 | - transceiver: phandle of the associated ISP1301 device - this is necessary for |
| 9 | the UDC controller for connecting to the USB physical layer |
Roland Stigge | 2265efe | 2012-04-29 16:47:03 +0200 | [diff] [blame] | 10 | |
| 11 | Example (LPC32xx): |
| 12 | |
Roland Stigge | 73108aa | 2012-04-29 16:47:06 +0200 | [diff] [blame] | 13 | isp1301: usb-transceiver@2c { |
| 14 | compatible = "nxp,isp1301"; |
| 15 | reg = <0x2c>; |
| 16 | }; |
| 17 | |
Roland Stigge | 2265efe | 2012-04-29 16:47:03 +0200 | [diff] [blame] | 18 | ohci@31020000 { |
| 19 | compatible = "nxp,ohci-nxp"; |
| 20 | reg = <0x31020000 0x300>; |
| 21 | interrupt-parent = <&mic>; |
| 22 | interrupts = <0x3b 0>; |
Roland Stigge | 73108aa | 2012-04-29 16:47:06 +0200 | [diff] [blame] | 23 | transceiver = <&isp1301>; |
Roland Stigge | 2265efe | 2012-04-29 16:47:03 +0200 | [diff] [blame] | 24 | }; |