Wolfram Sang | bd99b68 | 2016-04-01 13:56:23 +0200 | [diff] [blame] | 1 | /* |
| 2 | * Watchdog driver for Renesas WDT watchdog |
| 3 | * |
| 4 | * Copyright (C) 2015-16 Wolfram Sang, Sang Engineering <wsa@sang-engineering.com> |
| 5 | * Copyright (C) 2015-16 Renesas Electronics Corporation |
| 6 | * |
| 7 | * This program is free software; you can redistribute it and/or modify it |
| 8 | * under the terms of the GNU General Public License version 2 as published by |
| 9 | * the Free Software Foundation. |
| 10 | */ |
| 11 | #include <linux/bitops.h> |
| 12 | #include <linux/clk.h> |
| 13 | #include <linux/io.h> |
| 14 | #include <linux/kernel.h> |
| 15 | #include <linux/module.h> |
| 16 | #include <linux/of.h> |
| 17 | #include <linux/platform_device.h> |
| 18 | #include <linux/pm_runtime.h> |
| 19 | #include <linux/watchdog.h> |
| 20 | |
| 21 | #define RWTCNT 0 |
| 22 | #define RWTCSRA 4 |
| 23 | #define RWTCSRA_WOVF BIT(4) |
| 24 | #define RWTCSRA_WRFLG BIT(5) |
| 25 | #define RWTCSRA_TME BIT(7) |
| 26 | |
| 27 | #define RWDT_DEFAULT_TIMEOUT 60U |
| 28 | |
| 29 | static const unsigned int clk_divs[] = { 1, 4, 16, 32, 64, 128, 1024 }; |
| 30 | |
| 31 | static bool nowayout = WATCHDOG_NOWAYOUT; |
| 32 | module_param(nowayout, bool, 0); |
| 33 | MODULE_PARM_DESC(nowayout, "Watchdog cannot be stopped once started (default=" |
| 34 | __MODULE_STRING(WATCHDOG_NOWAYOUT) ")"); |
| 35 | |
| 36 | struct rwdt_priv { |
| 37 | void __iomem *base; |
| 38 | struct watchdog_device wdev; |
| 39 | struct clk *clk; |
| 40 | unsigned int clks_per_sec; |
| 41 | u8 cks; |
| 42 | }; |
| 43 | |
| 44 | static void rwdt_write(struct rwdt_priv *priv, u32 val, unsigned int reg) |
| 45 | { |
| 46 | if (reg == RWTCNT) |
| 47 | val |= 0x5a5a0000; |
| 48 | else |
| 49 | val |= 0xa5a5a500; |
| 50 | |
| 51 | writel_relaxed(val, priv->base + reg); |
| 52 | } |
| 53 | |
| 54 | static int rwdt_init_timeout(struct watchdog_device *wdev) |
| 55 | { |
| 56 | struct rwdt_priv *priv = watchdog_get_drvdata(wdev); |
| 57 | |
| 58 | rwdt_write(priv, 65536 - wdev->timeout * priv->clks_per_sec, RWTCNT); |
| 59 | |
| 60 | return 0; |
| 61 | } |
| 62 | |
| 63 | static int rwdt_start(struct watchdog_device *wdev) |
| 64 | { |
| 65 | struct rwdt_priv *priv = watchdog_get_drvdata(wdev); |
| 66 | |
| 67 | clk_prepare_enable(priv->clk); |
| 68 | |
| 69 | rwdt_write(priv, priv->cks, RWTCSRA); |
| 70 | rwdt_init_timeout(wdev); |
| 71 | |
| 72 | while (readb_relaxed(priv->base + RWTCSRA) & RWTCSRA_WRFLG) |
| 73 | cpu_relax(); |
| 74 | |
| 75 | rwdt_write(priv, priv->cks | RWTCSRA_TME, RWTCSRA); |
| 76 | |
| 77 | return 0; |
| 78 | } |
| 79 | |
| 80 | static int rwdt_stop(struct watchdog_device *wdev) |
| 81 | { |
| 82 | struct rwdt_priv *priv = watchdog_get_drvdata(wdev); |
| 83 | |
| 84 | rwdt_write(priv, priv->cks, RWTCSRA); |
| 85 | clk_disable_unprepare(priv->clk); |
| 86 | |
| 87 | return 0; |
| 88 | } |
| 89 | |
| 90 | static unsigned int rwdt_get_timeleft(struct watchdog_device *wdev) |
| 91 | { |
| 92 | struct rwdt_priv *priv = watchdog_get_drvdata(wdev); |
| 93 | u16 val = readw_relaxed(priv->base + RWTCNT); |
| 94 | |
| 95 | return DIV_ROUND_CLOSEST(65536 - val, priv->clks_per_sec); |
| 96 | } |
| 97 | |
| 98 | static const struct watchdog_info rwdt_ident = { |
| 99 | .options = WDIOF_MAGICCLOSE | WDIOF_KEEPALIVEPING | WDIOF_SETTIMEOUT, |
| 100 | .identity = "Renesas WDT Watchdog", |
| 101 | }; |
| 102 | |
| 103 | static const struct watchdog_ops rwdt_ops = { |
| 104 | .owner = THIS_MODULE, |
| 105 | .start = rwdt_start, |
| 106 | .stop = rwdt_stop, |
| 107 | .ping = rwdt_init_timeout, |
| 108 | .get_timeleft = rwdt_get_timeleft, |
| 109 | }; |
| 110 | |
| 111 | static int rwdt_probe(struct platform_device *pdev) |
| 112 | { |
| 113 | struct rwdt_priv *priv; |
| 114 | struct resource *res; |
| 115 | unsigned long rate; |
| 116 | unsigned int clks_per_sec; |
| 117 | int ret, i; |
| 118 | |
| 119 | priv = devm_kzalloc(&pdev->dev, sizeof(*priv), GFP_KERNEL); |
| 120 | if (!priv) |
| 121 | return -ENOMEM; |
| 122 | |
| 123 | res = platform_get_resource(pdev, IORESOURCE_MEM, 0); |
| 124 | priv->base = devm_ioremap_resource(&pdev->dev, res); |
| 125 | if (IS_ERR(priv->base)) |
| 126 | return PTR_ERR(priv->base); |
| 127 | |
| 128 | priv->clk = devm_clk_get(&pdev->dev, NULL); |
| 129 | if (IS_ERR(priv->clk)) |
| 130 | return PTR_ERR(priv->clk); |
| 131 | |
| 132 | rate = clk_get_rate(priv->clk); |
| 133 | if (!rate) |
| 134 | return -ENOENT; |
| 135 | |
| 136 | for (i = ARRAY_SIZE(clk_divs) - 1; i >= 0; i--) { |
| 137 | clks_per_sec = DIV_ROUND_UP(rate, clk_divs[i]); |
| 138 | if (clks_per_sec) { |
| 139 | priv->clks_per_sec = clks_per_sec; |
| 140 | priv->cks = i; |
| 141 | break; |
| 142 | } |
| 143 | } |
| 144 | |
| 145 | if (!clks_per_sec) { |
| 146 | dev_err(&pdev->dev, "Can't find suitable clock divider\n"); |
| 147 | return -ERANGE; |
| 148 | } |
| 149 | |
| 150 | pm_runtime_enable(&pdev->dev); |
| 151 | pm_runtime_get_sync(&pdev->dev); |
| 152 | |
| 153 | priv->wdev.info = &rwdt_ident, |
| 154 | priv->wdev.ops = &rwdt_ops, |
| 155 | priv->wdev.parent = &pdev->dev; |
| 156 | priv->wdev.min_timeout = 1; |
| 157 | priv->wdev.max_timeout = 65536 / clks_per_sec; |
| 158 | priv->wdev.timeout = min(priv->wdev.max_timeout, RWDT_DEFAULT_TIMEOUT); |
| 159 | |
| 160 | platform_set_drvdata(pdev, priv); |
| 161 | watchdog_set_drvdata(&priv->wdev, priv); |
| 162 | watchdog_set_nowayout(&priv->wdev, nowayout); |
| 163 | |
| 164 | /* This overrides the default timeout only if DT configuration was found */ |
| 165 | ret = watchdog_init_timeout(&priv->wdev, 0, &pdev->dev); |
| 166 | if (ret) |
| 167 | dev_warn(&pdev->dev, "Specified timeout value invalid, using default\n"); |
| 168 | |
| 169 | ret = watchdog_register_device(&priv->wdev); |
| 170 | if (ret < 0) { |
| 171 | pm_runtime_put(&pdev->dev); |
| 172 | pm_runtime_disable(&pdev->dev); |
| 173 | return ret; |
| 174 | } |
| 175 | |
| 176 | return 0; |
| 177 | } |
| 178 | |
| 179 | static int rwdt_remove(struct platform_device *pdev) |
| 180 | { |
| 181 | struct rwdt_priv *priv = platform_get_drvdata(pdev); |
| 182 | |
| 183 | watchdog_unregister_device(&priv->wdev); |
| 184 | pm_runtime_put(&pdev->dev); |
| 185 | pm_runtime_disable(&pdev->dev); |
| 186 | |
| 187 | return 0; |
| 188 | } |
| 189 | |
| 190 | /* |
| 191 | * This driver does also fit for R-Car Gen2 (r8a779[0-4]) WDT. However, for SMP |
| 192 | * to work there, one also needs a RESET (RST) driver which does not exist yet |
| 193 | * due to HW issues. This needs to be solved before adding compatibles here. |
| 194 | */ |
| 195 | static const struct of_device_id rwdt_ids[] = { |
| 196 | { .compatible = "renesas,rcar-gen3-wdt", }, |
| 197 | { /* sentinel */ } |
| 198 | }; |
| 199 | MODULE_DEVICE_TABLE(of, rwdt_ids); |
| 200 | |
| 201 | static struct platform_driver rwdt_driver = { |
| 202 | .driver = { |
| 203 | .name = "renesas_wdt", |
| 204 | .of_match_table = rwdt_ids, |
| 205 | }, |
| 206 | .probe = rwdt_probe, |
| 207 | .remove = rwdt_remove, |
| 208 | }; |
| 209 | module_platform_driver(rwdt_driver); |
| 210 | |
| 211 | MODULE_DESCRIPTION("Renesas WDT Watchdog Driver"); |
| 212 | MODULE_LICENSE("GPL v2"); |
| 213 | MODULE_AUTHOR("Wolfram Sang <wsa@sang-engineering.com>"); |