blob: 774f5d3835cc9022fce2122a8316dc75b6171fad [file] [log] [blame]
Linus Torvalds1da177e2005-04-16 15:20:36 -07001INTRODUCTION
2
3 The USB Bluetooth driver supports any USB Bluetooth device.
4 It currently works well with the Linux USB Bluetooth stack from Axis
5 (available at http://developer.axis.com/software/bluetooth/ ) and
6 has been rumored to work with other Linux USB Bluetooth stacks.
7
8
9CONFIGURATION
10
11 Currently the driver can handle up to 256 different USB Bluetooth
12 devices at once.
13
14 If you are not using devfs:
15 The major number that the driver uses is 216 so to use the driver,
16 create the following nodes:
17 mknod /dev/ttyUB0 c 216 0
18 mknod /dev/ttyUB1 c 216 1
19 mknod /dev/ttyUB2 c 216 2
20 mknod /dev/ttyUB3 c 216 3
21 .
22 .
23 .
24 mknod /dev/ttyUB254 c 216 254
25 mknod /dev/ttyUB255 c 216 255
26
27 If you are using devfs:
28 The devices supported by this driver will show up as
29 /dev/usb/ttub/{0,1,...}
30
31 When the device is connected and recognized by the driver, the driver
32 will print to the system log, which node the device has been bound to.
33
34
35CONTACT:
36
37 If anyone has any problems using this driver, please contact me, or
38 join the Linux-USB mailing list (information on joining the mailing
39 list, as well as a link to its searchable archive is at
40 http://www.linux-usb.org/ )
41
42
43Greg Kroah-Hartman
44greg@kroah.com