blob: 2e0e9b3774c88d7501462466dd858d3a3bf7edd0 [file] [log] [blame]
David Brownell9ebd9612008-12-18 12:25:44 -08001/*
2 * twl4030_usb - TWL4030 USB transceiver, talking to OMAP OTG controller
3 *
4 * Copyright (C) 2004-2007 Texas Instruments
5 * Copyright (C) 2008 Nokia Corporation
6 * Contact: Felipe Balbi <felipe.balbi@nokia.com>
7 *
8 * This program is free software; you can redistribute it and/or modify
9 * it under the terms of the GNU General Public License as published by
10 * the Free Software Foundation; either version 2 of the License, or
11 * (at your option) any later version.
12 *
13 * This program is distributed in the hope that it will be useful,
14 * but WITHOUT ANY WARRANTY; without even the implied warranty of
15 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
16 * GNU General Public License for more details.
17 *
18 * You should have received a copy of the GNU General Public License
19 * along with this program; if not, write to the Free Software
20 * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
21 *
22 * Current status:
23 * - HS USB ULPI mode works.
24 * - 3-pin mode support may be added in future.
25 */
26
27#include <linux/module.h>
28#include <linux/init.h>
29#include <linux/interrupt.h>
30#include <linux/platform_device.h>
31#include <linux/spinlock.h>
32#include <linux/workqueue.h>
33#include <linux/io.h>
34#include <linux/delay.h>
35#include <linux/usb/otg.h>
Kishon Vijay Abraham I6747caa2013-09-27 11:53:27 +053036#include <linux/phy/phy.h>
Kishon Vijay Abraham Ic9721432012-06-22 17:40:52 +053037#include <linux/usb/musb-omap.h>
Heikki Krogerus92a6e6b2010-03-31 10:18:05 +030038#include <linux/usb/ulpi.h>
Santosh Shilimkarb07682b2009-12-13 20:05:51 +010039#include <linux/i2c/twl.h>
Jouni Hogander66760162009-02-20 14:02:31 +020040#include <linux/regulator/consumer.h>
41#include <linux/err.h>
Tejun Heo5a0e3ad2010-03-24 17:04:11 +090042#include <linux/slab.h>
David Brownell9ebd9612008-12-18 12:25:44 -080043
44/* Register defines */
45
David Brownell9ebd9612008-12-18 12:25:44 -080046#define MCPC_CTRL 0x30
David Brownell9ebd9612008-12-18 12:25:44 -080047#define MCPC_CTRL_RTSOL (1 << 7)
48#define MCPC_CTRL_EXTSWR (1 << 6)
49#define MCPC_CTRL_EXTSWC (1 << 5)
50#define MCPC_CTRL_VOICESW (1 << 4)
51#define MCPC_CTRL_OUT64K (1 << 3)
52#define MCPC_CTRL_RTSCTSSW (1 << 2)
53#define MCPC_CTRL_HS_UART (1 << 0)
54
55#define MCPC_IO_CTRL 0x33
David Brownell9ebd9612008-12-18 12:25:44 -080056#define MCPC_IO_CTRL_MICBIASEN (1 << 5)
57#define MCPC_IO_CTRL_CTS_NPU (1 << 4)
58#define MCPC_IO_CTRL_RXD_PU (1 << 3)
59#define MCPC_IO_CTRL_TXDTYP (1 << 2)
60#define MCPC_IO_CTRL_CTSTYP (1 << 1)
61#define MCPC_IO_CTRL_RTSTYP (1 << 0)
62
63#define MCPC_CTRL2 0x36
David Brownell9ebd9612008-12-18 12:25:44 -080064#define MCPC_CTRL2_MCPC_CK_EN (1 << 0)
65
66#define OTHER_FUNC_CTRL 0x80
David Brownell9ebd9612008-12-18 12:25:44 -080067#define OTHER_FUNC_CTRL_BDIS_ACON_EN (1 << 4)
68#define OTHER_FUNC_CTRL_FIVEWIRE_MODE (1 << 2)
69
70#define OTHER_IFC_CTRL 0x83
David Brownell9ebd9612008-12-18 12:25:44 -080071#define OTHER_IFC_CTRL_OE_INT_EN (1 << 6)
72#define OTHER_IFC_CTRL_CEA2011_MODE (1 << 5)
73#define OTHER_IFC_CTRL_FSLSSERIALMODE_4PIN (1 << 4)
74#define OTHER_IFC_CTRL_HIZ_ULPI_60MHZ_OUT (1 << 3)
75#define OTHER_IFC_CTRL_HIZ_ULPI (1 << 2)
76#define OTHER_IFC_CTRL_ALT_INT_REROUTE (1 << 0)
77
78#define OTHER_INT_EN_RISE 0x86
David Brownell9ebd9612008-12-18 12:25:44 -080079#define OTHER_INT_EN_FALL 0x89
David Brownell9ebd9612008-12-18 12:25:44 -080080#define OTHER_INT_STS 0x8C
81#define OTHER_INT_LATCH 0x8D
82#define OTHER_INT_VB_SESS_VLD (1 << 7)
83#define OTHER_INT_DM_HI (1 << 6) /* not valid for "latch" reg */
84#define OTHER_INT_DP_HI (1 << 5) /* not valid for "latch" reg */
85#define OTHER_INT_BDIS_ACON (1 << 3) /* not valid for "fall" regs */
86#define OTHER_INT_MANU (1 << 1)
87#define OTHER_INT_ABNORMAL_STRESS (1 << 0)
88
89#define ID_STATUS 0x96
90#define ID_RES_FLOAT (1 << 4)
91#define ID_RES_440K (1 << 3)
92#define ID_RES_200K (1 << 2)
93#define ID_RES_102K (1 << 1)
94#define ID_RES_GND (1 << 0)
95
96#define POWER_CTRL 0xAC
David Brownell9ebd9612008-12-18 12:25:44 -080097#define POWER_CTRL_OTG_ENAB (1 << 5)
98
99#define OTHER_IFC_CTRL2 0xAF
David Brownell9ebd9612008-12-18 12:25:44 -0800100#define OTHER_IFC_CTRL2_ULPI_STP_LOW (1 << 4)
101#define OTHER_IFC_CTRL2_ULPI_TXEN_POL (1 << 3)
102#define OTHER_IFC_CTRL2_ULPI_4PIN_2430 (1 << 2)
103#define OTHER_IFC_CTRL2_USB_INT_OUTSEL_MASK (3 << 0) /* bits 0 and 1 */
104#define OTHER_IFC_CTRL2_USB_INT_OUTSEL_INT1N (0 << 0)
105#define OTHER_IFC_CTRL2_USB_INT_OUTSEL_INT2N (1 << 0)
106
107#define REG_CTRL_EN 0xB2
David Brownell9ebd9612008-12-18 12:25:44 -0800108#define REG_CTRL_ERROR 0xB5
109#define ULPI_I2C_CONFLICT_INTEN (1 << 0)
110
111#define OTHER_FUNC_CTRL2 0xB8
David Brownell9ebd9612008-12-18 12:25:44 -0800112#define OTHER_FUNC_CTRL2_VBAT_TIMER_EN (1 << 0)
113
114/* following registers do not have separate _clr and _set registers */
115#define VBUS_DEBOUNCE 0xC0
116#define ID_DEBOUNCE 0xC1
117#define VBAT_TIMER 0xD3
118#define PHY_PWR_CTRL 0xFD
119#define PHY_PWR_PHYPWD (1 << 0)
120#define PHY_CLK_CTRL 0xFE
121#define PHY_CLK_CTRL_CLOCKGATING_EN (1 << 2)
122#define PHY_CLK_CTRL_CLK32K_EN (1 << 1)
123#define REQ_PHY_DPLL_CLK (1 << 0)
124#define PHY_CLK_CTRL_STS 0xFF
125#define PHY_DPLL_CLK (1 << 0)
126
Peter Ujfalusi9d94e162012-11-13 10:43:38 +0100127/* In module TWL_MODULE_PM_MASTER */
David Brownelldef6f8b2009-03-31 12:26:10 -0700128#define STS_HW_CONDITIONS 0x0F
David Brownell9ebd9612008-12-18 12:25:44 -0800129
Peter Ujfalusi9d94e162012-11-13 10:43:38 +0100130/* In module TWL_MODULE_PM_RECEIVER */
David Brownell9ebd9612008-12-18 12:25:44 -0800131#define VUSB_DEDICATED1 0x7D
132#define VUSB_DEDICATED2 0x7E
133#define VUSB1V5_DEV_GRP 0x71
134#define VUSB1V5_TYPE 0x72
135#define VUSB1V5_REMAP 0x73
136#define VUSB1V8_DEV_GRP 0x74
137#define VUSB1V8_TYPE 0x75
138#define VUSB1V8_REMAP 0x76
139#define VUSB3V1_DEV_GRP 0x77
140#define VUSB3V1_TYPE 0x78
141#define VUSB3V1_REMAP 0x79
142
143/* In module TWL4030_MODULE_INTBR */
144#define PMBR1 0x0D
145#define GPIO_USB_4PIN_ULPI_2430C (3 << 0)
146
David Brownell9ebd9612008-12-18 12:25:44 -0800147struct twl4030_usb {
Heikki Krogerus74d4aa42012-02-13 13:24:11 +0200148 struct usb_phy phy;
David Brownell9ebd9612008-12-18 12:25:44 -0800149 struct device *dev;
150
Jouni Hogander66760162009-02-20 14:02:31 +0200151 /* TWL4030 internal USB regulator supplies */
152 struct regulator *usb1v5;
153 struct regulator *usb1v8;
154 struct regulator *usb3v1;
155
David Brownell9ebd9612008-12-18 12:25:44 -0800156 /* for vbus reporting with irqs disabled */
157 spinlock_t lock;
158
159 /* pin configuration */
160 enum twl4030_usb_mode usb_mode;
161
162 int irq;
Kishon Vijay Abraham Ic9721432012-06-22 17:40:52 +0530163 enum omap_musb_vbus_id_status linkstat;
Matthias Kaehlckea87103a2011-04-01 23:02:07 +0200164 bool vbus_supplied;
David Brownell9ebd9612008-12-18 12:25:44 -0800165 u8 asleep;
166 bool irq_enabled;
Grazvydas Ignotas249751f2013-03-17 20:23:24 +0200167
168 struct delayed_work id_workaround_work;
David Brownell9ebd9612008-12-18 12:25:44 -0800169};
170
171/* internal define on top of container_of */
Heikki Krogerus74d4aa42012-02-13 13:24:11 +0200172#define phy_to_twl(x) container_of((x), struct twl4030_usb, phy)
David Brownell9ebd9612008-12-18 12:25:44 -0800173
174/*-------------------------------------------------------------------------*/
175
176static int twl4030_i2c_write_u8_verify(struct twl4030_usb *twl,
177 u8 module, u8 data, u8 address)
178{
179 u8 check;
180
Balaji T Kfc7b92f2009-12-13 21:23:33 +0100181 if ((twl_i2c_write_u8(module, data, address) >= 0) &&
182 (twl_i2c_read_u8(module, &check, address) >= 0) &&
David Brownell9ebd9612008-12-18 12:25:44 -0800183 (check == data))
184 return 0;
185 dev_dbg(twl->dev, "Write%d[%d,0x%x] wrote %02x but read %02x\n",
186 1, module, address, check, data);
187
188 /* Failed once: Try again */
Balaji T Kfc7b92f2009-12-13 21:23:33 +0100189 if ((twl_i2c_write_u8(module, data, address) >= 0) &&
190 (twl_i2c_read_u8(module, &check, address) >= 0) &&
David Brownell9ebd9612008-12-18 12:25:44 -0800191 (check == data))
192 return 0;
193 dev_dbg(twl->dev, "Write%d[%d,0x%x] wrote %02x but read %02x\n",
194 2, module, address, check, data);
195
196 /* Failed again: Return error */
197 return -EBUSY;
198}
199
200#define twl4030_usb_write_verify(twl, address, data) \
Peter Ujfalusi9d94e162012-11-13 10:43:38 +0100201 twl4030_i2c_write_u8_verify(twl, TWL_MODULE_USB, (data), (address))
David Brownell9ebd9612008-12-18 12:25:44 -0800202
203static inline int twl4030_usb_write(struct twl4030_usb *twl,
204 u8 address, u8 data)
205{
206 int ret = 0;
207
Peter Ujfalusi9d94e162012-11-13 10:43:38 +0100208 ret = twl_i2c_write_u8(TWL_MODULE_USB, data, address);
David Brownell9ebd9612008-12-18 12:25:44 -0800209 if (ret < 0)
210 dev_dbg(twl->dev,
211 "TWL4030:USB:Write[0x%x] Error %d\n", address, ret);
212 return ret;
213}
214
215static inline int twl4030_readb(struct twl4030_usb *twl, u8 module, u8 address)
216{
217 u8 data;
218 int ret = 0;
219
Balaji T Kfc7b92f2009-12-13 21:23:33 +0100220 ret = twl_i2c_read_u8(module, &data, address);
David Brownell9ebd9612008-12-18 12:25:44 -0800221 if (ret >= 0)
222 ret = data;
223 else
224 dev_dbg(twl->dev,
225 "TWL4030:readb[0x%x,0x%x] Error %d\n",
226 module, address, ret);
227
228 return ret;
229}
230
231static inline int twl4030_usb_read(struct twl4030_usb *twl, u8 address)
232{
Peter Ujfalusi9d94e162012-11-13 10:43:38 +0100233 return twl4030_readb(twl, TWL_MODULE_USB, address);
David Brownell9ebd9612008-12-18 12:25:44 -0800234}
235
236/*-------------------------------------------------------------------------*/
237
238static inline int
239twl4030_usb_set_bits(struct twl4030_usb *twl, u8 reg, u8 bits)
240{
Heikki Krogerus92a6e6b2010-03-31 10:18:05 +0300241 return twl4030_usb_write(twl, ULPI_SET(reg), bits);
David Brownell9ebd9612008-12-18 12:25:44 -0800242}
243
244static inline int
245twl4030_usb_clear_bits(struct twl4030_usb *twl, u8 reg, u8 bits)
246{
Heikki Krogerus92a6e6b2010-03-31 10:18:05 +0300247 return twl4030_usb_write(twl, ULPI_CLR(reg), bits);
David Brownell9ebd9612008-12-18 12:25:44 -0800248}
249
250/*-------------------------------------------------------------------------*/
251
Grazvydas Ignotasf65f4f42013-03-24 17:36:53 +0200252static bool twl4030_is_driving_vbus(struct twl4030_usb *twl)
253{
254 int ret;
255
256 ret = twl4030_usb_read(twl, PHY_CLK_CTRL_STS);
257 if (ret < 0 || !(ret & PHY_DPLL_CLK))
258 /*
259 * if clocks are off, registers are not updated,
260 * but we can assume we don't drive VBUS in this case
261 */
262 return false;
263
264 ret = twl4030_usb_read(twl, ULPI_OTG_CTRL);
265 if (ret < 0)
266 return false;
267
268 return (ret & (ULPI_OTG_DRVVBUS | ULPI_OTG_CHRGVBUS)) ? true : false;
269}
270
Kishon Vijay Abraham Ic9721432012-06-22 17:40:52 +0530271static enum omap_musb_vbus_id_status
272 twl4030_usb_linkstat(struct twl4030_usb *twl)
David Brownell9ebd9612008-12-18 12:25:44 -0800273{
274 int status;
Kishon Vijay Abraham Ic9721432012-06-22 17:40:52 +0530275 enum omap_musb_vbus_id_status linkstat = OMAP_MUSB_UNKNOWN;
David Brownell9ebd9612008-12-18 12:25:44 -0800276
Matthias Kaehlckea87103a2011-04-01 23:02:07 +0200277 twl->vbus_supplied = false;
278
David Brownelldef6f8b2009-03-31 12:26:10 -0700279 /*
280 * For ID/VBUS sensing, see manual section 15.4.8 ...
281 * except when using only battery backup power, two
282 * comparators produce VBUS_PRES and ID_PRES signals,
283 * which don't match docs elsewhere. But ... BIT(7)
284 * and BIT(2) of STS_HW_CONDITIONS, respectively, do
285 * seem to match up. If either is true the USB_PRES
286 * signal is active, the OTG module is activated, and
287 * its interrupt may be raised (may wake the system).
288 */
Peter Ujfalusi9d94e162012-11-13 10:43:38 +0100289 status = twl4030_readb(twl, TWL_MODULE_PM_MASTER, STS_HW_CONDITIONS);
David Brownell9ebd9612008-12-18 12:25:44 -0800290 if (status < 0)
291 dev_err(twl->dev, "USB link status err %d\n", status);
David Brownelldef6f8b2009-03-31 12:26:10 -0700292 else if (status & (BIT(7) | BIT(2))) {
Grazvydas Ignotasf65f4f42013-03-24 17:36:53 +0200293 if (status & BIT(7)) {
294 if (twl4030_is_driving_vbus(twl))
295 status &= ~BIT(7);
296 else
297 twl->vbus_supplied = true;
298 }
Matthias Kaehlckea87103a2011-04-01 23:02:07 +0200299
David Brownelldef6f8b2009-03-31 12:26:10 -0700300 if (status & BIT(2))
Kishon Vijay Abraham Ic9721432012-06-22 17:40:52 +0530301 linkstat = OMAP_MUSB_ID_GROUND;
Grazvydas Ignotasf65f4f42013-03-24 17:36:53 +0200302 else if (status & BIT(7))
Kishon Vijay Abraham Ic9721432012-06-22 17:40:52 +0530303 linkstat = OMAP_MUSB_VBUS_VALID;
Grazvydas Ignotasf65f4f42013-03-24 17:36:53 +0200304 else
305 linkstat = OMAP_MUSB_VBUS_OFF;
Kishon Vijay Abraham Ic9721432012-06-22 17:40:52 +0530306 } else {
307 if (twl->linkstat != OMAP_MUSB_UNKNOWN)
308 linkstat = OMAP_MUSB_VBUS_OFF;
309 }
David Brownell9ebd9612008-12-18 12:25:44 -0800310
311 dev_dbg(twl->dev, "HW_CONDITIONS 0x%02x/%d; link %d\n",
312 status, status, linkstat);
313
314 /* REVISIT this assumes host and peripheral controllers
315 * are registered, and that both are active...
316 */
317
David Brownell9ebd9612008-12-18 12:25:44 -0800318 return linkstat;
319}
320
321static void twl4030_usb_set_mode(struct twl4030_usb *twl, int mode)
322{
323 twl->usb_mode = mode;
324
325 switch (mode) {
326 case T2_USB_MODE_ULPI:
Heikki Krogerus92a6e6b2010-03-31 10:18:05 +0300327 twl4030_usb_clear_bits(twl, ULPI_IFC_CTRL,
328 ULPI_IFC_CTRL_CARKITMODE);
David Brownell9ebd9612008-12-18 12:25:44 -0800329 twl4030_usb_set_bits(twl, POWER_CTRL, POWER_CTRL_OTG_ENAB);
Heikki Krogerus92a6e6b2010-03-31 10:18:05 +0300330 twl4030_usb_clear_bits(twl, ULPI_FUNC_CTRL,
331 ULPI_FUNC_CTRL_XCVRSEL_MASK |
332 ULPI_FUNC_CTRL_OPMODE_MASK);
David Brownell9ebd9612008-12-18 12:25:44 -0800333 break;
334 case -1:
335 /* FIXME: power on defaults */
336 break;
337 default:
338 dev_err(twl->dev, "unsupported T2 transceiver mode %d\n",
339 mode);
340 break;
Sachin Kamated093e62014-02-03 13:55:04 +0530341 }
David Brownell9ebd9612008-12-18 12:25:44 -0800342}
343
344static void twl4030_i2c_access(struct twl4030_usb *twl, int on)
345{
346 unsigned long timeout;
347 int val = twl4030_usb_read(twl, PHY_CLK_CTRL);
348
349 if (val >= 0) {
350 if (on) {
351 /* enable DPLL to access PHY registers over I2C */
352 val |= REQ_PHY_DPLL_CLK;
353 WARN_ON(twl4030_usb_write_verify(twl, PHY_CLK_CTRL,
354 (u8)val) < 0);
355
356 timeout = jiffies + HZ;
357 while (!(twl4030_usb_read(twl, PHY_CLK_CTRL_STS) &
358 PHY_DPLL_CLK)
359 && time_before(jiffies, timeout))
360 udelay(10);
361 if (!(twl4030_usb_read(twl, PHY_CLK_CTRL_STS) &
362 PHY_DPLL_CLK))
363 dev_err(twl->dev, "Timeout setting T2 HSUSB "
364 "PHY DPLL clock\n");
365 } else {
366 /* let ULPI control the DPLL clock */
367 val &= ~REQ_PHY_DPLL_CLK;
368 WARN_ON(twl4030_usb_write_verify(twl, PHY_CLK_CTRL,
369 (u8)val) < 0);
370 }
371 }
372}
373
Ming Leifc8f2a72010-09-06 23:27:09 +0800374static void __twl4030_phy_power(struct twl4030_usb *twl, int on)
375{
376 u8 pwr = twl4030_usb_read(twl, PHY_PWR_CTRL);
377
378 if (on)
379 pwr &= ~PHY_PWR_PHYPWD;
380 else
381 pwr |= PHY_PWR_PHYPWD;
382
383 WARN_ON(twl4030_usb_write_verify(twl, PHY_PWR_CTRL, pwr) < 0);
384}
385
David Brownell9ebd9612008-12-18 12:25:44 -0800386static void twl4030_phy_power(struct twl4030_usb *twl, int on)
387{
Fabio Baltieri9ec602e2013-04-03 16:02:26 +0200388 int ret;
389
David Brownell9ebd9612008-12-18 12:25:44 -0800390 if (on) {
Fabio Baltieri9ec602e2013-04-03 16:02:26 +0200391 ret = regulator_enable(twl->usb3v1);
392 if (ret)
393 dev_err(twl->dev, "Failed to enable usb3v1\n");
394
395 ret = regulator_enable(twl->usb1v8);
396 if (ret)
397 dev_err(twl->dev, "Failed to enable usb1v8\n");
398
Jouni Hogander66760162009-02-20 14:02:31 +0200399 /*
400 * Disabling usb3v1 regulator (= writing 0 to VUSB3V1_DEV_GRP
401 * in twl4030) resets the VUSB_DEDICATED2 register. This reset
402 * enables VUSB3V1_SLEEP bit that remaps usb3v1 ACTIVE state to
403 * SLEEP. We work around this by clearing the bit after usv3v1
404 * is re-activated. This ensures that VUSB3V1 is really active.
405 */
Peter Ujfalusi9d94e162012-11-13 10:43:38 +0100406 twl_i2c_write_u8(TWL_MODULE_PM_RECEIVER, 0, VUSB_DEDICATED2);
Fabio Baltieri9ec602e2013-04-03 16:02:26 +0200407
408 ret = regulator_enable(twl->usb1v5);
409 if (ret)
410 dev_err(twl->dev, "Failed to enable usb1v5\n");
411
Ming Leifc8f2a72010-09-06 23:27:09 +0800412 __twl4030_phy_power(twl, 1);
David Brownell9ebd9612008-12-18 12:25:44 -0800413 twl4030_usb_write(twl, PHY_CLK_CTRL,
414 twl4030_usb_read(twl, PHY_CLK_CTRL) |
415 (PHY_CLK_CTRL_CLOCKGATING_EN |
416 PHY_CLK_CTRL_CLK32K_EN));
Ming Leifc8f2a72010-09-06 23:27:09 +0800417 } else {
418 __twl4030_phy_power(twl, 0);
Jouni Hogander66760162009-02-20 14:02:31 +0200419 regulator_disable(twl->usb1v5);
420 regulator_disable(twl->usb1v8);
421 regulator_disable(twl->usb3v1);
David Brownell9ebd9612008-12-18 12:25:44 -0800422 }
423}
424
Kishon Vijay Abraham I6747caa2013-09-27 11:53:27 +0530425static int twl4030_phy_power_off(struct phy *phy)
426{
427 struct twl4030_usb *twl = phy_get_drvdata(phy);
428
Kishon Vijay Abraham If1ddc24c92013-09-27 11:53:31 +0530429 if (twl->asleep)
430 return 0;
431
432 twl4030_phy_power(twl, 0);
433 twl->asleep = 1;
434 dev_dbg(twl->dev, "%s\n", __func__);
Kishon Vijay Abraham I6747caa2013-09-27 11:53:27 +0530435 return 0;
436}
437
Kishon Vijay Abraham If1ddc24c92013-09-27 11:53:31 +0530438static void __twl4030_phy_power_on(struct twl4030_usb *twl)
Ming Leifc8f2a72010-09-06 23:27:09 +0800439{
440 twl4030_phy_power(twl, 1);
441 twl4030_i2c_access(twl, 1);
442 twl4030_usb_set_mode(twl, twl->usb_mode);
443 if (twl->usb_mode == T2_USB_MODE_ULPI)
444 twl4030_i2c_access(twl, 0);
David Brownell9ebd9612008-12-18 12:25:44 -0800445}
446
Kishon Vijay Abraham If1ddc24c92013-09-27 11:53:31 +0530447static int twl4030_phy_power_on(struct phy *phy)
David Brownell9ebd9612008-12-18 12:25:44 -0800448{
Kishon Vijay Abraham If1ddc24c92013-09-27 11:53:31 +0530449 struct twl4030_usb *twl = phy_get_drvdata(phy);
450
David Brownell9ebd9612008-12-18 12:25:44 -0800451 if (!twl->asleep)
Kishon Vijay Abraham If1ddc24c92013-09-27 11:53:31 +0530452 return 0;
453 __twl4030_phy_power_on(twl);
David Brownell9ebd9612008-12-18 12:25:44 -0800454 twl->asleep = 0;
Ming Leifc8f2a72010-09-06 23:27:09 +0800455 dev_dbg(twl->dev, "%s\n", __func__);
Grazvydas Ignotas249751f2013-03-17 20:23:24 +0200456
457 /*
458 * XXX When VBUS gets driven after musb goes to A mode,
459 * ID_PRES related interrupts no longer arrive, why?
460 * Register itself is updated fine though, so we must poll.
461 */
462 if (twl->linkstat == OMAP_MUSB_ID_GROUND) {
463 cancel_delayed_work(&twl->id_workaround_work);
464 schedule_delayed_work(&twl->id_workaround_work, HZ);
465 }
Kishon Vijay Abraham I6747caa2013-09-27 11:53:27 +0530466 return 0;
467}
468
Jouni Hogander66760162009-02-20 14:02:31 +0200469static int twl4030_usb_ldo_init(struct twl4030_usb *twl)
David Brownell9ebd9612008-12-18 12:25:44 -0800470{
471 /* Enable writing to power configuration registers */
Peter Ujfalusi9d94e162012-11-13 10:43:38 +0100472 twl_i2c_write_u8(TWL_MODULE_PM_MASTER, TWL4030_PM_MASTER_KEY_CFG1,
473 TWL4030_PM_MASTER_PROTECT_KEY);
Felipe Balbie7944d82010-08-18 09:19:37 +0300474
Peter Ujfalusi9d94e162012-11-13 10:43:38 +0100475 twl_i2c_write_u8(TWL_MODULE_PM_MASTER, TWL4030_PM_MASTER_KEY_CFG2,
476 TWL4030_PM_MASTER_PROTECT_KEY);
David Brownell9ebd9612008-12-18 12:25:44 -0800477
Ming Leifc8f2a72010-09-06 23:27:09 +0800478 /* Keep VUSB3V1 LDO in sleep state until VBUS/ID change detected*/
Peter Ujfalusi9d94e162012-11-13 10:43:38 +0100479 /*twl_i2c_write_u8(TWL_MODULE_PM_RECEIVER, 0, VUSB_DEDICATED2);*/
David Brownell9ebd9612008-12-18 12:25:44 -0800480
481 /* input to VUSB3V1 LDO is from VBAT, not VBUS */
Peter Ujfalusi9d94e162012-11-13 10:43:38 +0100482 twl_i2c_write_u8(TWL_MODULE_PM_RECEIVER, 0x14, VUSB_DEDICATED1);
David Brownell9ebd9612008-12-18 12:25:44 -0800483
Jouni Hogander66760162009-02-20 14:02:31 +0200484 /* Initialize 3.1V regulator */
Peter Ujfalusi9d94e162012-11-13 10:43:38 +0100485 twl_i2c_write_u8(TWL_MODULE_PM_RECEIVER, 0, VUSB3V1_DEV_GRP);
Jouni Hogander66760162009-02-20 14:02:31 +0200486
Kishon Vijay Abraham I91669022013-03-15 18:58:51 +0530487 twl->usb3v1 = devm_regulator_get(twl->dev, "usb3v1");
Jouni Hogander66760162009-02-20 14:02:31 +0200488 if (IS_ERR(twl->usb3v1))
489 return -ENODEV;
490
Peter Ujfalusi9d94e162012-11-13 10:43:38 +0100491 twl_i2c_write_u8(TWL_MODULE_PM_RECEIVER, 0, VUSB3V1_TYPE);
David Brownell9ebd9612008-12-18 12:25:44 -0800492
Jouni Hogander66760162009-02-20 14:02:31 +0200493 /* Initialize 1.5V regulator */
Peter Ujfalusi9d94e162012-11-13 10:43:38 +0100494 twl_i2c_write_u8(TWL_MODULE_PM_RECEIVER, 0, VUSB1V5_DEV_GRP);
Jouni Hogander66760162009-02-20 14:02:31 +0200495
Kishon Vijay Abraham I91669022013-03-15 18:58:51 +0530496 twl->usb1v5 = devm_regulator_get(twl->dev, "usb1v5");
Jouni Hogander66760162009-02-20 14:02:31 +0200497 if (IS_ERR(twl->usb1v5))
Kishon Vijay Abraham I91669022013-03-15 18:58:51 +0530498 return -ENODEV;
Jouni Hogander66760162009-02-20 14:02:31 +0200499
Peter Ujfalusi9d94e162012-11-13 10:43:38 +0100500 twl_i2c_write_u8(TWL_MODULE_PM_RECEIVER, 0, VUSB1V5_TYPE);
David Brownell9ebd9612008-12-18 12:25:44 -0800501
Jouni Hogander66760162009-02-20 14:02:31 +0200502 /* Initialize 1.8V regulator */
Peter Ujfalusi9d94e162012-11-13 10:43:38 +0100503 twl_i2c_write_u8(TWL_MODULE_PM_RECEIVER, 0, VUSB1V8_DEV_GRP);
Jouni Hogander66760162009-02-20 14:02:31 +0200504
Kishon Vijay Abraham I91669022013-03-15 18:58:51 +0530505 twl->usb1v8 = devm_regulator_get(twl->dev, "usb1v8");
Jouni Hogander66760162009-02-20 14:02:31 +0200506 if (IS_ERR(twl->usb1v8))
Kishon Vijay Abraham I91669022013-03-15 18:58:51 +0530507 return -ENODEV;
Jouni Hogander66760162009-02-20 14:02:31 +0200508
Peter Ujfalusi9d94e162012-11-13 10:43:38 +0100509 twl_i2c_write_u8(TWL_MODULE_PM_RECEIVER, 0, VUSB1V8_TYPE);
David Brownell9ebd9612008-12-18 12:25:44 -0800510
511 /* disable access to power configuration registers */
Peter Ujfalusi9d94e162012-11-13 10:43:38 +0100512 twl_i2c_write_u8(TWL_MODULE_PM_MASTER, 0,
513 TWL4030_PM_MASTER_PROTECT_KEY);
Jouni Hogander66760162009-02-20 14:02:31 +0200514
515 return 0;
David Brownell9ebd9612008-12-18 12:25:44 -0800516}
517
518static ssize_t twl4030_usb_vbus_show(struct device *dev,
519 struct device_attribute *attr, char *buf)
520{
521 struct twl4030_usb *twl = dev_get_drvdata(dev);
522 unsigned long flags;
523 int ret = -EINVAL;
524
525 spin_lock_irqsave(&twl->lock, flags);
526 ret = sprintf(buf, "%s\n",
Matthias Kaehlckea87103a2011-04-01 23:02:07 +0200527 twl->vbus_supplied ? "on" : "off");
David Brownell9ebd9612008-12-18 12:25:44 -0800528 spin_unlock_irqrestore(&twl->lock, flags);
529
530 return ret;
531}
532static DEVICE_ATTR(vbus, 0444, twl4030_usb_vbus_show, NULL);
533
534static irqreturn_t twl4030_usb_irq(int irq, void *_twl)
535{
536 struct twl4030_usb *twl = _twl;
Kishon Vijay Abraham Ic9721432012-06-22 17:40:52 +0530537 enum omap_musb_vbus_id_status status;
Grazvydas Ignotas249751f2013-03-17 20:23:24 +0200538 bool status_changed = false;
David Brownell9ebd9612008-12-18 12:25:44 -0800539
David Brownell9ebd9612008-12-18 12:25:44 -0800540 status = twl4030_usb_linkstat(twl);
Grazvydas Ignotas249751f2013-03-17 20:23:24 +0200541
542 spin_lock_irq(&twl->lock);
543 if (status >= 0 && status != twl->linkstat) {
544 twl->linkstat = status;
545 status_changed = true;
546 }
547 spin_unlock_irq(&twl->lock);
548
549 if (status_changed) {
David Brownell9ebd9612008-12-18 12:25:44 -0800550 /* FIXME add a set_power() method so that B-devices can
551 * configure the charger appropriately. It's not always
552 * correct to consume VBUS power, and how much current to
553 * consume is a function of the USB configuration chosen
554 * by the host.
555 *
556 * REVISIT usb_gadget_vbus_connect(...) as needed, ditto
557 * its disconnect() sibling, when changing to/from the
558 * USB_LINK_VBUS state. musb_hdrc won't care until it
559 * starts to handle softconnect right.
560 */
Grazvydas Ignotas249751f2013-03-17 20:23:24 +0200561 omap_musb_mailbox(status);
David Brownell9ebd9612008-12-18 12:25:44 -0800562 }
563 sysfs_notify(&twl->dev->kobj, NULL, "vbus");
564
565 return IRQ_HANDLED;
566}
567
Grazvydas Ignotas249751f2013-03-17 20:23:24 +0200568static void twl4030_id_workaround_work(struct work_struct *work)
Ming Leifc8f2a72010-09-06 23:27:09 +0800569{
Grazvydas Ignotas249751f2013-03-17 20:23:24 +0200570 struct twl4030_usb *twl = container_of(work, struct twl4030_usb,
571 id_workaround_work.work);
Kishon Vijay Abraham Ic9721432012-06-22 17:40:52 +0530572 enum omap_musb_vbus_id_status status;
Grazvydas Ignotas249751f2013-03-17 20:23:24 +0200573 bool status_changed = false;
Ming Leifc8f2a72010-09-06 23:27:09 +0800574
575 status = twl4030_usb_linkstat(twl);
Ming Leifc8f2a72010-09-06 23:27:09 +0800576
Grazvydas Ignotas249751f2013-03-17 20:23:24 +0200577 spin_lock_irq(&twl->lock);
578 if (status >= 0 && status != twl->linkstat) {
579 twl->linkstat = status;
580 status_changed = true;
Ming Leifc8f2a72010-09-06 23:27:09 +0800581 }
Grazvydas Ignotas249751f2013-03-17 20:23:24 +0200582 spin_unlock_irq(&twl->lock);
583
584 if (status_changed) {
585 dev_dbg(twl->dev, "handle missing status change to %d\n",
586 status);
587 omap_musb_mailbox(status);
588 }
589
590 /* don't schedule during sleep - irq works right then */
591 if (status == OMAP_MUSB_ID_GROUND && !twl->asleep) {
592 cancel_delayed_work(&twl->id_workaround_work);
593 schedule_delayed_work(&twl->id_workaround_work, HZ);
594 }
595}
596
Kishon Vijay Abraham If1ddc24c92013-09-27 11:53:31 +0530597static int twl4030_phy_init(struct phy *phy)
Ming Leifc8f2a72010-09-06 23:27:09 +0800598{
Kishon Vijay Abraham If1ddc24c92013-09-27 11:53:31 +0530599 struct twl4030_usb *twl = phy_get_drvdata(phy);
Ming Leifc8f2a72010-09-06 23:27:09 +0800600 enum omap_musb_vbus_id_status status;
601
Grazvydas Ignotas44a50d02013-03-17 20:23:21 +0200602 /*
603 * Start in sleep state, we'll get called through set_suspend()
604 * callback when musb is runtime resumed and it's time to start.
605 */
606 __twl4030_phy_power(twl, 0);
607 twl->asleep = 1;
Ming Leifc8f2a72010-09-06 23:27:09 +0800608
Grazvydas Ignotas44a50d02013-03-17 20:23:21 +0200609 status = twl4030_usb_linkstat(twl);
Grazvydas Ignotas249751f2013-03-17 20:23:24 +0200610 twl->linkstat = status;
611
Kishon Vijay Abraham I6747caa2013-09-27 11:53:27 +0530612 if (status == OMAP_MUSB_ID_GROUND || status == OMAP_MUSB_VBUS_VALID) {
Ming Leifc8f2a72010-09-06 23:27:09 +0800613 omap_musb_mailbox(twl->linkstat);
Kishon Vijay Abraham If1ddc24c92013-09-27 11:53:31 +0530614 twl4030_phy_power_on(phy);
Kishon Vijay Abraham I6747caa2013-09-27 11:53:27 +0530615 }
Grazvydas Ignotas44a50d02013-03-17 20:23:21 +0200616
Ming Leifc8f2a72010-09-06 23:27:09 +0800617 sysfs_notify(&twl->dev->kobj, NULL, "vbus");
Kishon Vijay Abraham I817e5f32013-03-15 18:58:52 +0530618 return 0;
Ming Leifc8f2a72010-09-06 23:27:09 +0800619}
620
Heikki Krogerus74d4aa42012-02-13 13:24:11 +0200621static int twl4030_set_peripheral(struct usb_otg *otg,
622 struct usb_gadget *gadget)
David Brownell9ebd9612008-12-18 12:25:44 -0800623{
Heikki Krogerus74d4aa42012-02-13 13:24:11 +0200624 if (!otg)
David Brownell9ebd9612008-12-18 12:25:44 -0800625 return -ENODEV;
626
Heikki Krogerus74d4aa42012-02-13 13:24:11 +0200627 otg->gadget = gadget;
David Brownell9ebd9612008-12-18 12:25:44 -0800628 if (!gadget)
Heikki Krogerus74d4aa42012-02-13 13:24:11 +0200629 otg->phy->state = OTG_STATE_UNDEFINED;
David Brownell9ebd9612008-12-18 12:25:44 -0800630
631 return 0;
632}
633
Heikki Krogerus74d4aa42012-02-13 13:24:11 +0200634static int twl4030_set_host(struct usb_otg *otg, struct usb_bus *host)
David Brownell9ebd9612008-12-18 12:25:44 -0800635{
Heikki Krogerus74d4aa42012-02-13 13:24:11 +0200636 if (!otg)
David Brownell9ebd9612008-12-18 12:25:44 -0800637 return -ENODEV;
638
Heikki Krogerus74d4aa42012-02-13 13:24:11 +0200639 otg->host = host;
David Brownell9ebd9612008-12-18 12:25:44 -0800640 if (!host)
Heikki Krogerus74d4aa42012-02-13 13:24:11 +0200641 otg->phy->state = OTG_STATE_UNDEFINED;
David Brownell9ebd9612008-12-18 12:25:44 -0800642
643 return 0;
644}
645
Kishon Vijay Abraham I6747caa2013-09-27 11:53:27 +0530646static const struct phy_ops ops = {
647 .init = twl4030_phy_init,
648 .power_on = twl4030_phy_power_on,
649 .power_off = twl4030_phy_power_off,
650 .owner = THIS_MODULE,
651};
652
Bill Pemberton41ac7b32012-11-19 13:21:48 -0500653static int twl4030_usb_probe(struct platform_device *pdev)
David Brownell9ebd9612008-12-18 12:25:44 -0800654{
Jingoo Han19f9e182013-07-30 17:02:13 +0900655 struct twl4030_usb_data *pdata = dev_get_platdata(&pdev->dev);
David Brownell9ebd9612008-12-18 12:25:44 -0800656 struct twl4030_usb *twl;
Kishon Vijay Abraham I6747caa2013-09-27 11:53:27 +0530657 struct phy *phy;
Jouni Hogander66760162009-02-20 14:02:31 +0200658 int status, err;
Heikki Krogerus74d4aa42012-02-13 13:24:11 +0200659 struct usb_otg *otg;
Kishon Vijay Abraham If8515f02012-09-06 20:27:09 +0530660 struct device_node *np = pdev->dev.of_node;
Kishon Vijay Abraham I6747caa2013-09-27 11:53:27 +0530661 struct phy_provider *phy_provider;
662 struct phy_init_data *init_data = NULL;
David Brownell9ebd9612008-12-18 12:25:44 -0800663
Sachin Kamatb6d790f2014-02-03 13:55:03 +0530664 twl = devm_kzalloc(&pdev->dev, sizeof(*twl), GFP_KERNEL);
David Brownell9ebd9612008-12-18 12:25:44 -0800665 if (!twl)
666 return -ENOMEM;
667
Kishon Vijay Abraham If8515f02012-09-06 20:27:09 +0530668 if (np)
669 of_property_read_u32(np, "usb_mode",
670 (enum twl4030_usb_mode *)&twl->usb_mode);
Kishon Vijay Abraham I6747caa2013-09-27 11:53:27 +0530671 else if (pdata) {
Kishon Vijay Abraham If8515f02012-09-06 20:27:09 +0530672 twl->usb_mode = pdata->usb_mode;
Kishon Vijay Abraham I6747caa2013-09-27 11:53:27 +0530673 init_data = pdata->init_data;
674 } else {
Kishon Vijay Abraham If8515f02012-09-06 20:27:09 +0530675 dev_err(&pdev->dev, "twl4030 initialized without pdata\n");
676 return -EINVAL;
677 }
678
Sachin Kamatb6d790f2014-02-03 13:55:03 +0530679 otg = devm_kzalloc(&pdev->dev, sizeof(*otg), GFP_KERNEL);
Kishon Vijay Abraham Ib8a3efa2012-06-22 17:40:55 +0530680 if (!otg)
Heikki Krogerus74d4aa42012-02-13 13:24:11 +0200681 return -ENOMEM;
Heikki Krogerus74d4aa42012-02-13 13:24:11 +0200682
David Brownell9ebd9612008-12-18 12:25:44 -0800683 twl->dev = &pdev->dev;
684 twl->irq = platform_get_irq(pdev, 0);
Matthias Kaehlckea87103a2011-04-01 23:02:07 +0200685 twl->vbus_supplied = false;
Heikki Krogerus74d4aa42012-02-13 13:24:11 +0200686 twl->asleep = 1;
Kishon Vijay Abraham Ic9721432012-06-22 17:40:52 +0530687 twl->linkstat = OMAP_MUSB_UNKNOWN;
Heikki Krogerus74d4aa42012-02-13 13:24:11 +0200688
689 twl->phy.dev = twl->dev;
690 twl->phy.label = "twl4030";
691 twl->phy.otg = otg;
Kishon Vijay Abraham Ic11747f2013-01-25 08:03:24 +0530692 twl->phy.type = USB_PHY_TYPE_USB2;
Heikki Krogerus74d4aa42012-02-13 13:24:11 +0200693
694 otg->phy = &twl->phy;
695 otg->set_host = twl4030_set_host;
696 otg->set_peripheral = twl4030_set_peripheral;
David Brownell9ebd9612008-12-18 12:25:44 -0800697
Kishon Vijay Abraham I6747caa2013-09-27 11:53:27 +0530698 phy = devm_phy_create(twl->dev, &ops, init_data);
699 if (IS_ERR(phy)) {
700 dev_dbg(&pdev->dev, "Failed to create PHY\n");
701 return PTR_ERR(phy);
702 }
703
704 phy_set_drvdata(phy, twl);
705
Kishon Vijay Abraham I64fe1892014-02-17 14:29:25 +0530706 phy_provider = devm_of_phy_provider_register(twl->dev,
707 of_phy_simple_xlate);
708 if (IS_ERR(phy_provider))
709 return PTR_ERR(phy_provider);
710
David Brownell9ebd9612008-12-18 12:25:44 -0800711 /* init spinlock for workqueue */
712 spin_lock_init(&twl->lock);
713
Grazvydas Ignotas249751f2013-03-17 20:23:24 +0200714 INIT_DELAYED_WORK(&twl->id_workaround_work, twl4030_id_workaround_work);
715
Jouni Hogander66760162009-02-20 14:02:31 +0200716 err = twl4030_usb_ldo_init(twl);
717 if (err) {
718 dev_err(&pdev->dev, "ldo init failed\n");
Jouni Hogander66760162009-02-20 14:02:31 +0200719 return err;
720 }
Kishon Vijay Abraham Ic11747f2013-01-25 08:03:24 +0530721 usb_add_phy_dev(&twl->phy);
David Brownell9ebd9612008-12-18 12:25:44 -0800722
723 platform_set_drvdata(pdev, twl);
724 if (device_create_file(&pdev->dev, &dev_attr_vbus))
725 dev_warn(&pdev->dev, "could not create sysfs file\n");
726
Pali Rohár80d2e762013-09-18 19:03:33 +0200727 ATOMIC_INIT_NOTIFIER_HEAD(&twl->phy.notifier);
728
David Brownell9ebd9612008-12-18 12:25:44 -0800729 /* Our job is to use irqs and status from the power module
730 * to keep the transceiver disabled when nothing's connected.
731 *
732 * FIXME we actually shouldn't start enabling it until the
733 * USB controller drivers have said they're ready, by calling
734 * set_host() and/or set_peripheral() ... OTG_capable boards
735 * need both handles, otherwise just one suffices.
736 */
737 twl->irq_enabled = true;
Kishon Vijay Abraham I91669022013-03-15 18:58:51 +0530738 status = devm_request_threaded_irq(twl->dev, twl->irq, NULL,
739 twl4030_usb_irq, IRQF_TRIGGER_FALLING |
740 IRQF_TRIGGER_RISING | IRQF_ONESHOT, "twl4030_usb", twl);
David Brownell9ebd9612008-12-18 12:25:44 -0800741 if (status < 0) {
742 dev_dbg(&pdev->dev, "can't get IRQ %d, err %d\n",
743 twl->irq, status);
David Brownell9ebd9612008-12-18 12:25:44 -0800744 return status;
745 }
746
David Brownell9ebd9612008-12-18 12:25:44 -0800747 dev_info(&pdev->dev, "Initialized TWL4030 USB module\n");
748 return 0;
749}
750
Dmitry Torokhov39d35682013-02-24 00:55:07 -0800751static int twl4030_usb_remove(struct platform_device *pdev)
David Brownell9ebd9612008-12-18 12:25:44 -0800752{
753 struct twl4030_usb *twl = platform_get_drvdata(pdev);
754 int val;
755
Grazvydas Ignotas249751f2013-03-17 20:23:24 +0200756 cancel_delayed_work(&twl->id_workaround_work);
David Brownell9ebd9612008-12-18 12:25:44 -0800757 device_remove_file(twl->dev, &dev_attr_vbus);
758
759 /* set transceiver mode to power on defaults */
760 twl4030_usb_set_mode(twl, -1);
761
762 /* autogate 60MHz ULPI clock,
763 * clear dpll clock request for i2c access,
764 * disable 32KHz
765 */
766 val = twl4030_usb_read(twl, PHY_CLK_CTRL);
767 if (val >= 0) {
768 val |= PHY_CLK_CTRL_CLOCKGATING_EN;
769 val &= ~(PHY_CLK_CTRL_CLK32K_EN | REQ_PHY_DPLL_CLK);
770 twl4030_usb_write(twl, PHY_CLK_CTRL, (u8)val);
771 }
772
773 /* disable complete OTG block */
774 twl4030_usb_clear_bits(twl, POWER_CTRL, POWER_CTRL_OTG_ENAB);
775
Jarkko Nikulac3d64502010-11-30 17:58:25 +0200776 if (!twl->asleep)
777 twl4030_phy_power(twl, 0);
David Brownell9ebd9612008-12-18 12:25:44 -0800778
David Brownell9ebd9612008-12-18 12:25:44 -0800779 return 0;
780}
781
Kishon Vijay Abraham If8515f02012-09-06 20:27:09 +0530782#ifdef CONFIG_OF
783static const struct of_device_id twl4030_usb_id_table[] = {
784 { .compatible = "ti,twl4030-usb" },
785 {}
786};
787MODULE_DEVICE_TABLE(of, twl4030_usb_id_table);
788#endif
789
David Brownell9ebd9612008-12-18 12:25:44 -0800790static struct platform_driver twl4030_usb_driver = {
791 .probe = twl4030_usb_probe,
Dmitry Torokhov39d35682013-02-24 00:55:07 -0800792 .remove = twl4030_usb_remove,
David Brownell9ebd9612008-12-18 12:25:44 -0800793 .driver = {
794 .name = "twl4030_usb",
795 .owner = THIS_MODULE,
Kishon Vijay Abraham If8515f02012-09-06 20:27:09 +0530796 .of_match_table = of_match_ptr(twl4030_usb_id_table),
David Brownell9ebd9612008-12-18 12:25:44 -0800797 },
798};
799
800static int __init twl4030_usb_init(void)
801{
802 return platform_driver_register(&twl4030_usb_driver);
803}
804subsys_initcall(twl4030_usb_init);
805
806static void __exit twl4030_usb_exit(void)
807{
808 platform_driver_unregister(&twl4030_usb_driver);
809}
810module_exit(twl4030_usb_exit);
811
812MODULE_ALIAS("platform:twl4030_usb");
813MODULE_AUTHOR("Texas Instruments, Inc, Nokia Corporation");
814MODULE_DESCRIPTION("TWL4030 USB transceiver driver");
815MODULE_LICENSE("GPL");