Tomasz Duszynski | 3a11fbb | 2015-05-03 20:37:21 +0200 | [diff] [blame] | 1 | /* |
| 2 | * ROHM BH1710/BH1715/BH1721/BH1750/BH1751 ambient light sensor driver |
| 3 | * |
| 4 | * Copyright (c) Tomasz Duszynski <tduszyns@gmail.com> |
| 5 | * |
| 6 | * This program is free software; you can redistribute it and/or modify |
| 7 | * it under the terms of the GNU General Public License version 2 as |
| 8 | * published by the Free Software Foundation. |
| 9 | * |
| 10 | * Data sheets: |
| 11 | * http://rohmfs.rohm.com/en/products/databook/datasheet/ic/sensor/light/bh1710fvc-e.pdf |
| 12 | * http://rohmfs.rohm.com/en/products/databook/datasheet/ic/sensor/light/bh1715fvc-e.pdf |
| 13 | * http://rohmfs.rohm.com/en/products/databook/datasheet/ic/sensor/light/bh1721fvc-e.pdf |
| 14 | * http://rohmfs.rohm.com/en/products/databook/datasheet/ic/sensor/light/bh1750fvi-e.pdf |
| 15 | * http://rohmfs.rohm.com/en/products/databook/datasheet/ic/sensor/light/bh1751fvi-e.pdf |
| 16 | * |
| 17 | * 7-bit I2C slave addresses: |
| 18 | * 0x23 (ADDR pin low) |
| 19 | * 0x5C (ADDR pin high) |
| 20 | * |
| 21 | */ |
| 22 | |
| 23 | #include <linux/delay.h> |
| 24 | #include <linux/i2c.h> |
| 25 | #include <linux/iio/iio.h> |
| 26 | #include <linux/iio/sysfs.h> |
| 27 | #include <linux/module.h> |
| 28 | |
| 29 | #define BH1750_POWER_DOWN 0x00 |
| 30 | #define BH1750_ONE_TIME_H_RES_MODE 0x20 /* auto-mode for BH1721 */ |
| 31 | #define BH1750_CHANGE_INT_TIME_H_BIT 0x40 |
| 32 | #define BH1750_CHANGE_INT_TIME_L_BIT 0x60 |
| 33 | |
| 34 | enum { |
| 35 | BH1710, |
| 36 | BH1721, |
| 37 | BH1750, |
| 38 | }; |
| 39 | |
| 40 | struct bh1750_chip_info; |
| 41 | struct bh1750_data { |
| 42 | struct i2c_client *client; |
| 43 | struct mutex lock; |
| 44 | const struct bh1750_chip_info *chip_info; |
| 45 | u16 mtreg; |
| 46 | }; |
| 47 | |
| 48 | struct bh1750_chip_info { |
| 49 | u16 mtreg_min; |
| 50 | u16 mtreg_max; |
| 51 | u16 mtreg_default; |
| 52 | int mtreg_to_usec; |
| 53 | int mtreg_to_scale; |
| 54 | |
| 55 | /* |
| 56 | * For BH1710/BH1721 all possible integration time values won't fit |
| 57 | * into one page so displaying is limited to every second one. |
| 58 | * Note, that user can still write proper values which were not |
| 59 | * listed. |
| 60 | */ |
| 61 | int inc; |
| 62 | |
| 63 | u16 int_time_low_mask; |
| 64 | u16 int_time_high_mask; |
| 65 | } |
| 66 | |
| 67 | static const bh1750_chip_info_tbl[] = { |
| 68 | [BH1710] = { 140, 1022, 300, 400, 250000000, 2, 0x001F, 0x03E0 }, |
| 69 | [BH1721] = { 140, 1020, 300, 400, 250000000, 2, 0x0010, 0x03E0 }, |
| 70 | [BH1750] = { 31, 254, 69, 1740, 57500000, 1, 0x001F, 0x00E0 }, |
| 71 | }; |
| 72 | |
| 73 | static int bh1750_change_int_time(struct bh1750_data *data, int usec) |
| 74 | { |
| 75 | int ret; |
| 76 | u16 val; |
| 77 | u8 regval; |
| 78 | const struct bh1750_chip_info *chip_info = data->chip_info; |
| 79 | |
| 80 | if ((usec % chip_info->mtreg_to_usec) != 0) |
| 81 | return -EINVAL; |
| 82 | |
| 83 | val = usec / chip_info->mtreg_to_usec; |
| 84 | if (val < chip_info->mtreg_min || val > chip_info->mtreg_max) |
| 85 | return -EINVAL; |
| 86 | |
| 87 | ret = i2c_smbus_write_byte(data->client, BH1750_POWER_DOWN); |
| 88 | if (ret < 0) |
| 89 | return ret; |
| 90 | |
| 91 | regval = (val & chip_info->int_time_high_mask) >> 5; |
| 92 | ret = i2c_smbus_write_byte(data->client, |
| 93 | BH1750_CHANGE_INT_TIME_H_BIT | regval); |
| 94 | if (ret < 0) |
| 95 | return ret; |
| 96 | |
| 97 | regval = val & chip_info->int_time_low_mask; |
| 98 | ret = i2c_smbus_write_byte(data->client, |
| 99 | BH1750_CHANGE_INT_TIME_L_BIT | regval); |
| 100 | if (ret < 0) |
| 101 | return ret; |
| 102 | |
| 103 | data->mtreg = val; |
| 104 | |
| 105 | return 0; |
| 106 | } |
| 107 | |
| 108 | static int bh1750_read(struct bh1750_data *data, int *val) |
| 109 | { |
| 110 | int ret; |
| 111 | __be16 result; |
| 112 | const struct bh1750_chip_info *chip_info = data->chip_info; |
| 113 | unsigned long delay = chip_info->mtreg_to_usec * data->mtreg; |
| 114 | |
| 115 | /* |
| 116 | * BH1721 will enter continuous mode on receiving this command. |
| 117 | * Note, that this eliminates need for bh1750_resume(). |
| 118 | */ |
| 119 | ret = i2c_smbus_write_byte(data->client, BH1750_ONE_TIME_H_RES_MODE); |
| 120 | if (ret < 0) |
| 121 | return ret; |
| 122 | |
| 123 | usleep_range(delay + 15000, delay + 40000); |
| 124 | |
| 125 | ret = i2c_master_recv(data->client, (char *)&result, 2); |
| 126 | if (ret < 0) |
| 127 | return ret; |
| 128 | |
| 129 | *val = be16_to_cpu(result); |
| 130 | |
| 131 | return 0; |
| 132 | } |
| 133 | |
| 134 | static int bh1750_read_raw(struct iio_dev *indio_dev, |
| 135 | struct iio_chan_spec const *chan, |
| 136 | int *val, int *val2, long mask) |
| 137 | { |
| 138 | int ret, tmp; |
| 139 | struct bh1750_data *data = iio_priv(indio_dev); |
| 140 | const struct bh1750_chip_info *chip_info = data->chip_info; |
| 141 | |
| 142 | switch (mask) { |
| 143 | case IIO_CHAN_INFO_RAW: |
| 144 | switch (chan->type) { |
| 145 | case IIO_LIGHT: |
| 146 | mutex_lock(&data->lock); |
| 147 | ret = bh1750_read(data, val); |
| 148 | mutex_unlock(&data->lock); |
| 149 | if (ret < 0) |
| 150 | return ret; |
| 151 | |
| 152 | return IIO_VAL_INT; |
| 153 | default: |
| 154 | return -EINVAL; |
| 155 | } |
| 156 | case IIO_CHAN_INFO_SCALE: |
| 157 | tmp = chip_info->mtreg_to_scale / data->mtreg; |
| 158 | *val = tmp / 1000000; |
| 159 | *val2 = tmp % 1000000; |
| 160 | return IIO_VAL_INT_PLUS_MICRO; |
| 161 | case IIO_CHAN_INFO_INT_TIME: |
| 162 | *val = 0; |
| 163 | *val2 = chip_info->mtreg_to_usec * data->mtreg; |
| 164 | return IIO_VAL_INT_PLUS_MICRO; |
| 165 | default: |
| 166 | return -EINVAL; |
| 167 | } |
| 168 | } |
| 169 | |
| 170 | static int bh1750_write_raw(struct iio_dev *indio_dev, |
| 171 | struct iio_chan_spec const *chan, |
| 172 | int val, int val2, long mask) |
| 173 | { |
| 174 | int ret; |
| 175 | struct bh1750_data *data = iio_priv(indio_dev); |
| 176 | |
| 177 | switch (mask) { |
| 178 | case IIO_CHAN_INFO_INT_TIME: |
| 179 | if (val != 0) |
| 180 | return -EINVAL; |
| 181 | |
| 182 | mutex_lock(&data->lock); |
| 183 | ret = bh1750_change_int_time(data, val2); |
| 184 | mutex_unlock(&data->lock); |
| 185 | return ret; |
| 186 | default: |
| 187 | return -EINVAL; |
| 188 | } |
| 189 | } |
| 190 | |
| 191 | static ssize_t bh1750_show_int_time_available(struct device *dev, |
| 192 | struct device_attribute *attr, char *buf) |
| 193 | { |
| 194 | int i; |
| 195 | size_t len = 0; |
| 196 | struct bh1750_data *data = iio_priv(dev_to_iio_dev(dev)); |
| 197 | const struct bh1750_chip_info *chip_info = data->chip_info; |
| 198 | |
| 199 | for (i = chip_info->mtreg_min; i <= chip_info->mtreg_max; i += chip_info->inc) |
| 200 | len += scnprintf(buf + len, PAGE_SIZE - len, "0.%06d ", |
| 201 | chip_info->mtreg_to_usec * i); |
| 202 | |
| 203 | buf[len - 1] = '\n'; |
| 204 | |
| 205 | return len; |
| 206 | } |
| 207 | |
| 208 | static IIO_DEV_ATTR_INT_TIME_AVAIL(bh1750_show_int_time_available); |
| 209 | |
| 210 | static struct attribute *bh1750_attributes[] = { |
| 211 | &iio_dev_attr_integration_time_available.dev_attr.attr, |
| 212 | NULL, |
| 213 | }; |
| 214 | |
| 215 | static struct attribute_group bh1750_attribute_group = { |
| 216 | .attrs = bh1750_attributes, |
| 217 | }; |
| 218 | |
| 219 | static const struct iio_info bh1750_info = { |
| 220 | .driver_module = THIS_MODULE, |
| 221 | .attrs = &bh1750_attribute_group, |
| 222 | .read_raw = bh1750_read_raw, |
| 223 | .write_raw = bh1750_write_raw, |
| 224 | }; |
| 225 | |
| 226 | static const struct iio_chan_spec bh1750_channels[] = { |
| 227 | { |
| 228 | .type = IIO_LIGHT, |
| 229 | .info_mask_separate = BIT(IIO_CHAN_INFO_RAW) | |
| 230 | BIT(IIO_CHAN_INFO_SCALE) | |
| 231 | BIT(IIO_CHAN_INFO_INT_TIME) |
| 232 | } |
| 233 | }; |
| 234 | |
| 235 | static int bh1750_probe(struct i2c_client *client, |
| 236 | const struct i2c_device_id *id) |
| 237 | { |
| 238 | int ret, usec; |
| 239 | struct bh1750_data *data; |
| 240 | struct iio_dev *indio_dev; |
| 241 | |
| 242 | if (!i2c_check_functionality(client->adapter, I2C_FUNC_I2C | |
| 243 | I2C_FUNC_SMBUS_WRITE_BYTE)) |
Matt Ranostay | f8d9d3b | 2016-02-26 22:13:49 -0800 | [diff] [blame] | 244 | return -EOPNOTSUPP; |
Tomasz Duszynski | 3a11fbb | 2015-05-03 20:37:21 +0200 | [diff] [blame] | 245 | |
| 246 | indio_dev = devm_iio_device_alloc(&client->dev, sizeof(*data)); |
| 247 | if (!indio_dev) |
| 248 | return -ENOMEM; |
| 249 | |
| 250 | data = iio_priv(indio_dev); |
| 251 | i2c_set_clientdata(client, indio_dev); |
| 252 | data->client = client; |
| 253 | data->chip_info = &bh1750_chip_info_tbl[id->driver_data]; |
| 254 | |
| 255 | usec = data->chip_info->mtreg_to_usec * data->chip_info->mtreg_default; |
| 256 | ret = bh1750_change_int_time(data, usec); |
| 257 | if (ret < 0) |
| 258 | return ret; |
| 259 | |
| 260 | mutex_init(&data->lock); |
| 261 | indio_dev->dev.parent = &client->dev; |
| 262 | indio_dev->info = &bh1750_info; |
| 263 | indio_dev->name = id->name; |
| 264 | indio_dev->channels = bh1750_channels; |
| 265 | indio_dev->num_channels = ARRAY_SIZE(bh1750_channels); |
| 266 | indio_dev->modes = INDIO_DIRECT_MODE; |
| 267 | |
| 268 | return iio_device_register(indio_dev); |
| 269 | } |
| 270 | |
| 271 | static int bh1750_remove(struct i2c_client *client) |
| 272 | { |
| 273 | struct iio_dev *indio_dev = i2c_get_clientdata(client); |
| 274 | struct bh1750_data *data = iio_priv(indio_dev); |
| 275 | |
| 276 | iio_device_unregister(indio_dev); |
| 277 | |
| 278 | mutex_lock(&data->lock); |
| 279 | i2c_smbus_write_byte(client, BH1750_POWER_DOWN); |
| 280 | mutex_unlock(&data->lock); |
| 281 | |
| 282 | return 0; |
| 283 | } |
| 284 | |
| 285 | #ifdef CONFIG_PM_SLEEP |
| 286 | static int bh1750_suspend(struct device *dev) |
| 287 | { |
| 288 | int ret; |
| 289 | struct bh1750_data *data = |
| 290 | iio_priv(i2c_get_clientdata(to_i2c_client(dev))); |
| 291 | |
| 292 | /* |
| 293 | * This is mainly for BH1721 which doesn't enter power down |
| 294 | * mode automatically. |
| 295 | */ |
| 296 | mutex_lock(&data->lock); |
| 297 | ret = i2c_smbus_write_byte(data->client, BH1750_POWER_DOWN); |
| 298 | mutex_unlock(&data->lock); |
| 299 | |
| 300 | return ret; |
| 301 | } |
| 302 | |
| 303 | static SIMPLE_DEV_PM_OPS(bh1750_pm_ops, bh1750_suspend, NULL); |
| 304 | #define BH1750_PM_OPS (&bh1750_pm_ops) |
| 305 | #else |
| 306 | #define BH1750_PM_OPS NULL |
| 307 | #endif |
| 308 | |
| 309 | static const struct i2c_device_id bh1750_id[] = { |
| 310 | { "bh1710", BH1710 }, |
| 311 | { "bh1715", BH1750 }, |
| 312 | { "bh1721", BH1721 }, |
| 313 | { "bh1750", BH1750 }, |
| 314 | { "bh1751", BH1750 }, |
| 315 | { } |
| 316 | }; |
| 317 | MODULE_DEVICE_TABLE(i2c, bh1750_id); |
| 318 | |
| 319 | static struct i2c_driver bh1750_driver = { |
| 320 | .driver = { |
| 321 | .name = "bh1750", |
Tomasz Duszynski | 3a11fbb | 2015-05-03 20:37:21 +0200 | [diff] [blame] | 322 | .pm = BH1750_PM_OPS, |
| 323 | }, |
| 324 | .probe = bh1750_probe, |
| 325 | .remove = bh1750_remove, |
| 326 | .id_table = bh1750_id, |
| 327 | |
| 328 | }; |
| 329 | module_i2c_driver(bh1750_driver); |
| 330 | |
| 331 | MODULE_AUTHOR("Tomasz Duszynski <tduszyns@gmail.com>"); |
| 332 | MODULE_DESCRIPTION("ROHM BH1710/BH1715/BH1721/BH1750/BH1751 als driver"); |
| 333 | MODULE_LICENSE("GPL v2"); |