Gitiles
Code Review Sign In
gerrit-public.fairphone.software / kernel / msm-4.19 / de77e52d34269f25a33e231fe3c1431116776617 / . / arch / arm / boot / dts / imx6qdl-tx6.dtsi
blob: da08de324e9eb595db45c7cae308327d77bd33a9 [file] [log] [blame]
Lothar Waßmannc8787ba2014-06-12 15:05:17 +0200[diff] [blame]1/*
2 * Copyright 2014 Lothar Waßmann <LW@KARO-electronics.de>
3 *
4 * The code contained herein is licensed under the GNU General Public
5 * License. You may obtain a copy of the GNU General Public License
6 * Version 2 at the following locations:
7 *
8 * http://www.opensource.org/licenses/gpl-license.html
9 * http://www.gnu.org/copyleft/gpl.html
10 */
11
12#include <dt-bindings/gpio/gpio.h>
13#include <dt-bindings/input/input.h>
14#include <dt-bindings/pwm/pwm.h>
15
16/ {
17 aliases {
18 can0 = &can2;
19 can1 = &can1;
20 ethernet0 = &fec;
21 lcdif_23bit_pins_a = &pinctrl_disp0_1;
22 lcdif_24bit_pins_a = &pinctrl_disp0_2;
23 pwm0 = &pwm1;
24 pwm1 = &pwm2;
25 reg_can_xcvr = &reg_can_xcvr;
26 stk5led = &user_led;
27 usbotg = &usbotg;
28 sdhc0 = &usdhc1;
29 sdhc1 = &usdhc2;
30 };
31
32 memory {
33 reg = <0 0>; /* will be filled by U-Boot */
34 };
35
36 clocks {
37 #address-cells = <1>;
38 #size-cells = <0>;
39 mclk: clock@0 {
40 compatible = "fixed-clock";
41 reg = <0>;
42 #clock-cells = <0>;
43 clock-frequency = <27000000>;
44 };
45 };
46
47 gpio-keys {
48 compatible = "gpio-keys";
49
50 power {
51 label = "Power Button";
52 gpios = <&gpio5 2 GPIO_ACTIVE_HIGH>;
53 linux,code = <KEY_POWER>;
54 gpio-key,wakeup;
55 };
56 };
57
58 leds {
59 compatible = "gpio-leds";
60
61 user_led: user {
62 label = "Heartbeat";
63 gpios = <&gpio2 20 GPIO_ACTIVE_HIGH>;
64 linux,default-trigger = "heartbeat";
65 };
66 };
67
68 regulators {
69 compatible = "simple-bus";
70 #address-cells = <1>;
71 #size-cells = <0>;
72
73 reg_3v3_etn: regulator@0 {
74 compatible = "regulator-fixed";
75 reg = <0>;
76 regulator-name = "3V3_ETN";
77 regulator-min-microvolt = <3300000>;
78 regulator-max-microvolt = <3300000>;
79 pinctrl-names = "default";
80 pinctrl-0 = <&pinctrl_etnphy_power>;
81 gpio = <&gpio3 20 GPIO_ACTIVE_HIGH>;
82 enable-active-high;
83 };
84
85 reg_2v5: regulator@1 {
86 compatible = "regulator-fixed";
87 reg = <1>;
88 regulator-name = "2V5";
89 regulator-min-microvolt = <2500000>;
90 regulator-max-microvolt = <2500000>;
91 regulator-always-on;
92 };
93
94 reg_3v3: regulator@2 {
95 compatible = "regulator-fixed";
96 reg = <2>;
97 regulator-name = "3V3";
98 regulator-min-microvolt = <3300000>;
99 regulator-max-microvolt = <3300000>;
100 regulator-always-on;
101 };
102
103 reg_can_xcvr: regulator@3 {
104 compatible = "regulator-fixed";
105 reg = <3>;
106 regulator-name = "CAN XCVR";
107 regulator-min-microvolt = <3300000>;
108 regulator-max-microvolt = <3300000>;
109 pinctrl-names = "default";
110 pinctrl-0 = <&pinctrl_flexcan_xcvr>;
111 gpio = <&gpio4 21 GPIO_ACTIVE_HIGH>;
112 enable-active-low;
113 };
114
115 reg_lcd0_pwr: regulator@4 {
116 compatible = "regulator-fixed";
117 reg = <4>;
118 regulator-name = "LCD0 POWER";
119 regulator-min-microvolt = <3300000>;
120 regulator-max-microvolt = <3300000>;
121 pinctrl-names = "default";
122 pinctrl-0 = <&pinctrl_lcd0_pwr>;
123 gpio = <&gpio3 29 GPIO_ACTIVE_HIGH>;
124 enable-active-high;
125 regulator-boot-on;
126 regulator-always-on;
127 };
128
129 reg_lcd1_pwr: regulator@5 {
130 compatible = "regulator-fixed";
131 reg = <5>;
132 regulator-name = "LCD1 POWER";
133 regulator-min-microvolt = <3300000>;
134 regulator-max-microvolt = <3300000>;
135 pinctrl-names = "default";
136 pinctrl-0 = <&pinctrl_lcd1_pwr>;
137 gpio = <&gpio2 31 GPIO_ACTIVE_HIGH>;
138 enable-active-high;
139 regulator-boot-on;
140 regulator-always-on;
141 };
142
143 reg_usbh1_vbus: regulator@6 {
144 compatible = "regulator-fixed";
145 reg = <6>;
146 regulator-name = "usbh1_vbus";
147 regulator-min-microvolt = <5000000>;
148 regulator-max-microvolt = <5000000>;
149 pinctrl-names = "default";
150 pinctrl-0 = <&pinctrl_usbh1_vbus>;
151 gpio = <&gpio3 31 GPIO_ACTIVE_HIGH>;
152 enable-active-high;
153 };
154
155 reg_usbotg_vbus: regulator@7 {
156 compatible = "regulator-fixed";
157 reg = <7>;
158 regulator-name = "usbotg_vbus";
159 regulator-min-microvolt = <5000000>;
160 regulator-max-microvolt = <5000000>;
161 pinctrl-names = "default";
162 pinctrl-0 = <&pinctrl_usbotg_vbus>;
163 gpio = <&gpio1 7 GPIO_ACTIVE_HIGH>;
164 enable-active-high;
165 };
166 };
167
168 sound {
169 compatible = "karo,imx6qdl-tx6qdl-sgtl5000",
170 "fsl,imx-audio-sgtl5000";
171 model = "sgtl5000-audio";
172 pinctrl-names = "default";
173 pinctrl-0 = <&pinctrl_audmux>;
174 ssi-controller = <&ssi1>;
175 audio-codec = <&sgtl5000>;
176 audio-routing =
177 "MIC_IN", "Mic Jack",
178 "Mic Jack", "Mic Bias",
179 "Headphone Jack", "HP_OUT";
180 mux-int-port = <1>;
181 mux-ext-port = <5>;
182 };
183};
184
185&audmux {
186 status = "okay";
187};
188
189&can1 {
190 pinctrl-names = "default";
191 pinctrl-0 = <&pinctrl_flexcan1>;
192 xceiver-supply = <&reg_can_xcvr>;
193 status = "okay";
194};
195
196&can2 {
197 pinctrl-names = "default";
198 pinctrl-0 = <&pinctrl_flexcan2>;
199 xceiver-supply = <&reg_can_xcvr>;
200 status = "okay";
201};
202
203&ecspi1 {
204 pinctrl-names = "default";
205 pinctrl-0 = <&pinctrl_ecspi1>;
206 fsl,spi-num-chipselects = <2>;
207 cs-gpios = <
208 &gpio2 30 GPIO_ACTIVE_HIGH
209 &gpio3 19 GPIO_ACTIVE_HIGH
210 >;
211 status = "okay";
212
213 spidev0: spi@0 {
214 compatible = "spidev";
215 reg = <0>;
216 spi-max-frequency = <54000000>;
217 };
218
219 spidev1: spi@1 {
220 compatible = "spidev";
221 reg = <1>;
222 spi-max-frequency = <54000000>;
223 };
224};
225
226&fec {
227 pinctrl-names = "default";
228 pinctrl-0 = <&pinctrl_enet>;
229 phy-mode = "rmii";
230 phy-reset-gpios = <&gpio7 6 GPIO_ACTIVE_HIGH>;
231 phy-supply = <&reg_3v3_etn>;
232 status = "okay";
233};
234
235&gpmi {
236 pinctrl-names = "default";
237 pinctrl-0 = <&pinctrl_gpmi_nand>;
238 nand-on-flash-bbt;
239 fsl,no-blockmark-swap;
240 status = "okay";
241};
242
243&i2c1 {
244 pinctrl-names = "default";
245 pinctrl-0 = <&pinctrl_i2c1>;
246 clock-frequency = <400000>;
247 status = "okay";
248
249 ds1339: rtc@68 {
250 compatible = "dallas,ds1339";
251 reg = <0x68>;
252 };
253};
254
255&i2c3 {
256 pinctrl-names = "default";
257 pinctrl-0 = <&pinctrl_i2c3>;
258 clock-frequency = <400000>;
259 status = "okay";
260
261 sgtl5000: sgtl5000@0a {
262 compatible = "fsl,sgtl5000";
263 reg = <0x0a>;
264 VDDA-supply = <&reg_2v5>;
265 VDDIO-supply = <&reg_3v3>;
266 clocks = <&mclk>;
267 };
268
269 polytouch: edt-ft5x06@38 {
270 compatible = "edt,edt-ft5x06";
271 reg = <0x38>;
272 pinctrl-names = "default";
273 pinctrl-0 = <&pinctrl_edt_ft5x06>;
274 interrupt-parent = <&gpio6>;
275 interrupts = <15 0>;
276 reset-gpios = <&gpio2 22 GPIO_ACTIVE_LOW>;
277 wake-gpios = <&gpio2 21 GPIO_ACTIVE_HIGH>;
278 linux,wakeup;
279 };
280
281 touchscreen: tsc2007@48 {
282 compatible = "ti,tsc2007";
283 reg = <0x48>;
284 pinctrl-names = "default";
285 pinctrl-0 = <&pinctrl_tsc2007>;
286 interrupt-parent = <&gpio3>;
287 interrupts = <26 0>;
288 gpios = <&gpio3 26 GPIO_ACTIVE_LOW>;
289 ti,x-plate-ohms = <660>;
290 linux,wakeup;
291 };
292};
293
294&iomuxc {
295 pinctrl-names = "default";
296 pinctrl-0 = <&pinctrl_hog>;
297
298 imx6qdl-tx6 {
299 pinctrl_hog: hoggrp {
300 fsl,pins = <
301 MX6QDL_PAD_EIM_A18__GPIO2_IO20 0x1b0b1 /* LED */
302 MX6QDL_PAD_SD3_DAT2__GPIO7_IO06 0x1b0b1 /* ETN PHY RESET */
303 MX6QDL_PAD_SD3_DAT4__GPIO7_IO01 0x1b0b1 /* ETN PHY INT */
304 MX6QDL_PAD_EIM_A25__GPIO5_IO02 0x1b0b1 /* PWR BTN */
305 >;
306 };
307
308 pinctrl_audmux: audmuxgrp {
309 fsl,pins = <
310 MX6QDL_PAD_KEY_ROW1__AUD5_RXD 0x130b0 /* SSI1_RXD */
311 MX6QDL_PAD_KEY_ROW0__AUD5_TXD 0x110b0 /* SSI1_TXD */
312 MX6QDL_PAD_KEY_COL0__AUD5_TXC 0x130b0 /* SSI1_CLK */
313 MX6QDL_PAD_KEY_COL1__AUD5_TXFS 0x130b0 /* SSI1_FS */
314 >;
315 };
316
317 pinctrl_disp0_1: disp0grp-1 {
318 fsl,pins = <
319 MX6QDL_PAD_DI0_DISP_CLK__IPU1_DI0_DISP_CLK 0x10
320 MX6QDL_PAD_DI0_PIN15__IPU1_DI0_PIN15 0x10
321 MX6QDL_PAD_DI0_PIN2__IPU1_DI0_PIN02 0x10
322 MX6QDL_PAD_DI0_PIN3__IPU1_DI0_PIN03 0x10
323 /* PAD DISP0_DAT0 is used for the Flexcan transceiver control */
324 MX6QDL_PAD_DISP0_DAT1__IPU1_DISP0_DATA01 0x10
325 MX6QDL_PAD_DISP0_DAT2__IPU1_DISP0_DATA02 0x10
326 MX6QDL_PAD_DISP0_DAT3__IPU1_DISP0_DATA03 0x10
327 MX6QDL_PAD_DISP0_DAT4__IPU1_DISP0_DATA04 0x10
328 MX6QDL_PAD_DISP0_DAT5__IPU1_DISP0_DATA05 0x10
329 MX6QDL_PAD_DISP0_DAT6__IPU1_DISP0_DATA06 0x10
330 MX6QDL_PAD_DISP0_DAT7__IPU1_DISP0_DATA07 0x10
331 MX6QDL_PAD_DISP0_DAT8__IPU1_DISP0_DATA08 0x10
332 MX6QDL_PAD_DISP0_DAT9__IPU1_DISP0_DATA09 0x10
333 MX6QDL_PAD_DISP0_DAT10__IPU1_DISP0_DATA10 0x10
334 MX6QDL_PAD_DISP0_DAT11__IPU1_DISP0_DATA11 0x10
335 MX6QDL_PAD_DISP0_DAT12__IPU1_DISP0_DATA12 0x10
336 MX6QDL_PAD_DISP0_DAT13__IPU1_DISP0_DATA13 0x10
337 MX6QDL_PAD_DISP0_DAT14__IPU1_DISP0_DATA14 0x10
338 MX6QDL_PAD_DISP0_DAT15__IPU1_DISP0_DATA15 0x10
339 MX6QDL_PAD_DISP0_DAT16__IPU1_DISP0_DATA16 0x10
340 MX6QDL_PAD_DISP0_DAT17__IPU1_DISP0_DATA17 0x10
341 MX6QDL_PAD_DISP0_DAT18__IPU1_DISP0_DATA18 0x10
342 MX6QDL_PAD_DISP0_DAT19__IPU1_DISP0_DATA19 0x10
343 MX6QDL_PAD_DISP0_DAT20__IPU1_DISP0_DATA20 0x10
344 MX6QDL_PAD_DISP0_DAT21__IPU1_DISP0_DATA21 0x10
345 MX6QDL_PAD_DISP0_DAT22__IPU1_DISP0_DATA22 0x10
346 MX6QDL_PAD_DISP0_DAT23__IPU1_DISP0_DATA23 0x10
347 >;
348 };
349
350 pinctrl_disp0_2: disp0grp-2 {
351 fsl,pins = <
352 MX6QDL_PAD_DI0_DISP_CLK__IPU1_DI0_DISP_CLK 0x10
353 MX6QDL_PAD_DI0_PIN15__IPU1_DI0_PIN15 0x10
354 MX6QDL_PAD_DI0_PIN2__IPU1_DI0_PIN02 0x10
355 MX6QDL_PAD_DI0_PIN3__IPU1_DI0_PIN03 0x10
356 MX6QDL_PAD_DISP0_DAT0__IPU1_DISP0_DATA00 0x10
357 MX6QDL_PAD_DISP0_DAT1__IPU1_DISP0_DATA01 0x10
358 MX6QDL_PAD_DISP0_DAT2__IPU1_DISP0_DATA02 0x10
359 MX6QDL_PAD_DISP0_DAT3__IPU1_DISP0_DATA03 0x10
360 MX6QDL_PAD_DISP0_DAT4__IPU1_DISP0_DATA04 0x10
361 MX6QDL_PAD_DISP0_DAT5__IPU1_DISP0_DATA05 0x10
362 MX6QDL_PAD_DISP0_DAT6__IPU1_DISP0_DATA06 0x10
363 MX6QDL_PAD_DISP0_DAT7__IPU1_DISP0_DATA07 0x10
364 MX6QDL_PAD_DISP0_DAT8__IPU1_DISP0_DATA08 0x10
365 MX6QDL_PAD_DISP0_DAT9__IPU1_DISP0_DATA09 0x10
366 MX6QDL_PAD_DISP0_DAT10__IPU1_DISP0_DATA10 0x10
367 MX6QDL_PAD_DISP0_DAT11__IPU1_DISP0_DATA11 0x10
368 MX6QDL_PAD_DISP0_DAT12__IPU1_DISP0_DATA12 0x10
369 MX6QDL_PAD_DISP0_DAT13__IPU1_DISP0_DATA13 0x10
370 MX6QDL_PAD_DISP0_DAT14__IPU1_DISP0_DATA14 0x10
371 MX6QDL_PAD_DISP0_DAT15__IPU1_DISP0_DATA15 0x10
372 MX6QDL_PAD_DISP0_DAT16__IPU1_DISP0_DATA16 0x10
373 MX6QDL_PAD_DISP0_DAT17__IPU1_DISP0_DATA17 0x10
374 MX6QDL_PAD_DISP0_DAT18__IPU1_DISP0_DATA18 0x10
375 MX6QDL_PAD_DISP0_DAT19__IPU1_DISP0_DATA19 0x10
376 MX6QDL_PAD_DISP0_DAT20__IPU1_DISP0_DATA20 0x10
377 MX6QDL_PAD_DISP0_DAT21__IPU1_DISP0_DATA21 0x10
378 MX6QDL_PAD_DISP0_DAT22__IPU1_DISP0_DATA22 0x10
379 MX6QDL_PAD_DISP0_DAT23__IPU1_DISP0_DATA23 0x10
380 >;
381 };
382
383 pinctrl_ecspi1: ecspi1grp {
384 fsl,pins = <
385 MX6QDL_PAD_EIM_D18__ECSPI1_MOSI 0x0b0b0
386 MX6QDL_PAD_EIM_D17__ECSPI1_MISO 0x0b0b0
387 MX6QDL_PAD_EIM_D16__ECSPI1_SCLK 0x0b0b0
388 MX6QDL_PAD_GPIO_19__ECSPI1_RDY 0x0b0b0
389 MX6QDL_PAD_EIM_EB2__GPIO2_IO30 0x0b0b0 /* SPI CS0 */
390 MX6QDL_PAD_EIM_D19__GPIO3_IO19 0x0b0b0 /* SPI CS1 */
391 >;
392 };
393
394 pinctrl_edt_ft5x06: edt-ft5x06grp {
395 fsl,pins = <
396 MX6QDL_PAD_NANDF_CS2__GPIO6_IO15 0x1b0b0 /* Interrupt */
397 MX6QDL_PAD_EIM_A16__GPIO2_IO22 0x1b0b0 /* Reset */
398 MX6QDL_PAD_EIM_A17__GPIO2_IO21 0x1b0b0 /* Wake */
399 >;
400 };
401
402 pinctrl_enet: enetgrp {
403 fsl,pins = <
404 MX6QDL_PAD_ENET_MDC__ENET_MDC 0x1b0b0
405 MX6QDL_PAD_ENET_MDIO__ENET_MDIO 0x1b0b0
406 MX6QDL_PAD_ENET_RXD0__ENET_RX_DATA0 0x1b0b0
407 MX6QDL_PAD_ENET_RXD1__ENET_RX_DATA1 0x1b0b0
408 MX6QDL_PAD_ENET_RX_ER__ENET_RX_ER 0x1b0b0
409 MX6QDL_PAD_ENET_TX_EN__ENET_TX_EN 0x1b0b0
410 MX6QDL_PAD_ENET_TXD0__ENET_TX_DATA0 0x1b0b0
411 MX6QDL_PAD_ENET_TXD1__ENET_TX_DATA1 0x1b0b0
412 MX6QDL_PAD_ENET_CRS_DV__ENET_RX_EN 0x1b0b0
413 >;
414 };
415
416 pinctrl_etnphy_power: etnphy-pwrgrp {
417 fsl,pins = <
418 MX6QDL_PAD_EIM_D20__GPIO3_IO20 0x1b0b1 /* ETN PHY POWER */
419 >;
420 };
421
422 pinctrl_flexcan1: flexcan1grp {
423 fsl,pins = <
424 MX6QDL_PAD_GPIO_7__FLEXCAN1_TX 0x1b0b0
425 MX6QDL_PAD_GPIO_8__FLEXCAN1_RX 0x1b0b0
426 >;
427 };
428
429 pinctrl_flexcan2: flexcan2grp {
430 fsl,pins = <
431 MX6QDL_PAD_KEY_COL4__FLEXCAN2_TX 0x1b0b0
432 MX6QDL_PAD_KEY_ROW4__FLEXCAN2_RX 0x1b0b0
433 >;
434 };
435
436 pinctrl_flexcan_xcvr: flexcan-xcvrgrp {
437 fsl,pins = <
438 MX6QDL_PAD_DISP0_DAT0__GPIO4_IO21 0x1b0b0 /* Flexcan XCVR enable */
439 >;
440 };
441
442 pinctrl_gpmi_nand: gpminandgrp {
443 fsl,pins = <
444 MX6QDL_PAD_NANDF_CLE__NAND_CLE 0x0b0b1
445 MX6QDL_PAD_NANDF_ALE__NAND_ALE 0x0b0b1
446 MX6QDL_PAD_NANDF_WP_B__NAND_WP_B 0x0b0b1
447 MX6QDL_PAD_NANDF_RB0__NAND_READY_B 0x0b000
448 MX6QDL_PAD_NANDF_CS0__NAND_CE0_B 0x0b0b1
449 MX6QDL_PAD_SD4_CMD__NAND_RE_B 0x0b0b1
450 MX6QDL_PAD_SD4_CLK__NAND_WE_B 0x0b0b1
451 MX6QDL_PAD_NANDF_D0__NAND_DATA00 0x0b0b1
452 MX6QDL_PAD_NANDF_D1__NAND_DATA01 0x0b0b1
453 MX6QDL_PAD_NANDF_D2__NAND_DATA02 0x0b0b1
454 MX6QDL_PAD_NANDF_D3__NAND_DATA03 0x0b0b1
455 MX6QDL_PAD_NANDF_D4__NAND_DATA04 0x0b0b1
456 MX6QDL_PAD_NANDF_D5__NAND_DATA05 0x0b0b1
457 MX6QDL_PAD_NANDF_D6__NAND_DATA06 0x0b0b1
458 MX6QDL_PAD_NANDF_D7__NAND_DATA07 0x0b0b1
459 >;
460 };
461
462 pinctrl_i2c1: i2c1grp {
463 fsl,pins = <
464 MX6QDL_PAD_EIM_D21__I2C1_SCL 0x4001b8b1
465 MX6QDL_PAD_EIM_D28__I2C1_SDA 0x4001b8b1
466 >;
467 };
468
469 pinctrl_i2c3: i2c3grp {
470 fsl,pins = <
471 MX6QDL_PAD_GPIO_3__I2C3_SCL 0x4001b8b1
472 MX6QDL_PAD_GPIO_6__I2C3_SDA 0x4001b8b1
473 >;
474 };
475
476 pinctrl_kpp: kppgrp {
477 fsl,pins = <
478 MX6QDL_PAD_GPIO_9__KEY_COL6 0x1b0b1
479 MX6QDL_PAD_GPIO_4__KEY_COL7 0x1b0b1
480 MX6QDL_PAD_KEY_COL2__KEY_COL2 0x1b0b1
481 MX6QDL_PAD_KEY_COL3__KEY_COL3 0x1b0b1
482 MX6QDL_PAD_GPIO_2__KEY_ROW6 0x1b0b1
483 MX6QDL_PAD_GPIO_5__KEY_ROW7 0x1b0b1
484 MX6QDL_PAD_KEY_ROW2__KEY_ROW2 0x1b0b1
485 MX6QDL_PAD_KEY_ROW3__KEY_ROW3 0x1b0b1
486 >;
487 };
488
489 pinctrl_lcd0_pwr: lcd0-pwrgrp {
490 fsl,pins = <
491 MX6QDL_PAD_EIM_D29__GPIO3_IO29 0x1b0b1 /* LCD Reset */
492 >;
493 };
494
495 pinctrl_lcd1_pwr: lcd1-pwrgrp {
496 fsl,pins = <
497 MX6QDL_PAD_EIM_EB3__GPIO2_IO31 0x1b0b1 /* LCD Power Enable */
498 >;
499 };
500
501 pinctrl_pwm1: pwm1grp {
502 fsl,pins = <
503 MX6QDL_PAD_GPIO_9__PWM1_OUT 0x1b0b1
504 >;
505 };
506
507 pinctrl_pwm2: pwm2grp {
508 fsl,pins = <
509 MX6QDL_PAD_GPIO_1__PWM2_OUT 0x1b0b1
510 >;
511 };
512
513 pinctrl_tsc2007: tsc2007grp {
514 fsl,pins = <
515 MX6QDL_PAD_EIM_D26__GPIO3_IO26 0x1b0b0 /* Interrupt */
516 >;
517 };
518
519 pinctrl_uart1: uart1grp {
520 fsl,pins = <
521 MX6QDL_PAD_SD3_DAT7__UART1_TX_DATA 0x1b0b1
522 MX6QDL_PAD_SD3_DAT6__UART1_RX_DATA 0x1b0b1
523 >;
524 };
525
526 pinctrl_uart1_rtscts: uart1_rtsctsgrp {
527 fsl,pins = <
528 MX6QDL_PAD_SD3_DAT1__UART1_RTS_B 0x1b0b1
529 MX6QDL_PAD_SD3_DAT0__UART1_CTS_B 0x1b0b1
530 >;
531 };
532
533 pinctrl_uart2: uart2grp {
534 fsl,pins = <
535 MX6QDL_PAD_SD4_DAT7__UART2_TX_DATA 0x1b0b1
536 MX6QDL_PAD_SD4_DAT4__UART2_RX_DATA 0x1b0b1
537 >;
538 };
539
540 pinctrl_uart2_rtscts: uart2_rtsctsgrp {
541 fsl,pins = <
542 MX6QDL_PAD_SD4_DAT5__UART2_RTS_B 0x1b0b1
543 MX6QDL_PAD_SD4_DAT6__UART2_CTS_B 0x1b0b1
544 >;
545 };
546
547 pinctrl_uart3: uart3grp {
548 fsl,pins = <
549 MX6QDL_PAD_EIM_D24__UART3_TX_DATA 0x1b0b1
550 MX6QDL_PAD_EIM_D25__UART3_RX_DATA 0x1b0b1
551 >;
552 };
553
554 pinctrl_uart3_rtscts: uart3_rtsctsgrp {
555 fsl,pins = <
556 MX6QDL_PAD_SD3_DAT3__UART3_CTS_B 0x1b0b1
557 MX6QDL_PAD_SD3_RST__UART3_RTS_B 0x1b0b1
558 >;
559 };
560
561 pinctrl_usbh1_vbus: usbh1-vbusgrp {
562 fsl,pins = <
563 MX6QDL_PAD_EIM_D31__GPIO3_IO31 0x1b0b0 /* USBH1_VBUSEN */
564 >;
565 };
566
567 pinctrl_usbotg: usbotggrp {
568 fsl,pins = <
569 MX6QDL_PAD_EIM_D23__GPIO3_IO23 0x17059
570 >;
571 };
572
573 pinctrl_usbotg_vbus: usbotg-vbusgrp {
574 fsl,pins = <
575 MX6QDL_PAD_GPIO_7__GPIO1_IO07 0x1b0b0 /* USBOTG_VBUSEN */
576 >;
577 };
578
579 pinctrl_usdhc1: usdhc1grp {
580 fsl,pins = <
581 MX6QDL_PAD_SD1_CMD__SD1_CMD 0x070b1
582 MX6QDL_PAD_SD1_CLK__SD1_CLK 0x070b1
583 MX6QDL_PAD_SD1_DAT0__SD1_DATA0 0x070b1
584 MX6QDL_PAD_SD1_DAT1__SD1_DATA1 0x070b1
585 MX6QDL_PAD_SD1_DAT2__SD1_DATA2 0x070b1
586 MX6QDL_PAD_SD1_DAT3__SD1_DATA3 0x070b1
587 MX6QDL_PAD_SD3_CMD__GPIO7_IO02 0x170b0 /* SD1 CD */
588 >;
589 };
590
591 pinctrl_usdhc2: usdhc2grp {
592 fsl,pins = <
593 MX6QDL_PAD_SD2_CMD__SD2_CMD 0x070b1
594 MX6QDL_PAD_SD2_CLK__SD2_CLK 0x070b1
595 MX6QDL_PAD_SD2_DAT0__SD2_DATA0 0x070b1
596 MX6QDL_PAD_SD2_DAT1__SD2_DATA1 0x070b1
597 MX6QDL_PAD_SD2_DAT2__SD2_DATA2 0x070b1
598 MX6QDL_PAD_SD2_DAT3__SD2_DATA3 0x070b1
599 MX6QDL_PAD_SD3_CLK__GPIO7_IO03 0x170b0 /* SD2 CD */
600 >;
601 };
602 };
603};
604
605&kpp {
606 pinctrl-names = "default";
607 pinctrl-0 = <&pinctrl_kpp>;
608 /* sample keymap */
609 /* row/col 0,1 are mapped to KPP row/col 6,7 */
610 linux,keymap = <
611 MATRIX_KEY(6, 6, KEY_POWER) /* 0x06060074 */
612 MATRIX_KEY(6, 7, KEY_KP0) /* 0x06070052 */
613 MATRIX_KEY(6, 2, KEY_KP1) /* 0x0602004f */
614 MATRIX_KEY(6, 3, KEY_KP2) /* 0x06030050 */
615 MATRIX_KEY(7, 6, KEY_KP3) /* 0x07060051 */
616 MATRIX_KEY(7, 7, KEY_KP4) /* 0x0707004b */
617 MATRIX_KEY(7, 2, KEY_KP5) /* 0x0702004c */
618 MATRIX_KEY(7, 3, KEY_KP6) /* 0x0703004d */
619 MATRIX_KEY(2, 6, KEY_KP7) /* 0x02060047 */
620 MATRIX_KEY(2, 7, KEY_KP8) /* 0x02070048 */
621 MATRIX_KEY(2, 2, KEY_KP9) /* 0x02020049 */
622 >;
Fabio Estevam1b6f2362014-06-24 21:13:44 -0300[diff] [blame]623 status = "okay";
Lothar Waßmannc8787ba2014-06-12 15:05:17 +0200[diff] [blame]624};
625
626&pwm1 {
627 pinctrl-names = "default";
628 pinctrl-0 = <&pinctrl_pwm1>;
629 #pwm-cells = <3>;
630 status = "disabled";
631};
632
633&pwm2 {
634 pinctrl-names = "default";
635 pinctrl-0 = <&pinctrl_pwm2>;
636 #pwm-cells = <3>;
637 status = "okay";
638};
639
640&ssi1 {
Lothar Waßmannc8787ba2014-06-12 15:05:17 +0200[diff] [blame]641 status = "okay";
642};
643
644&uart1 {
645 pinctrl-names = "default";
646 pinctrl-0 = <&pinctrl_uart1>;
647 status = "okay";
648};
649
650&uart2 {
651 pinctrl-names = "default";
652 pinctrl-0 = <&pinctrl_uart2 &pinctrl_uart2_rtscts>;
653 status = "okay";
654};
655
656&uart3 {
657 pinctrl-names = "default";
658 pinctrl-0 = <&pinctrl_uart3 &pinctrl_uart3_rtscts>;
659 status = "okay";
660};
661
662&usbh1 {
663 vbus-supply = <&reg_usbh1_vbus>;
664 dr_mode = "host";
665 disable-over-current;
666 status = "okay";
667};
668
669&usbotg {
670 vbus-supply = <&reg_usbotg_vbus>;
671 pinctrl-names = "default";
672 pinctrl-0 = <&pinctrl_usbotg>;
673 dr_mode = "peripheral";
674 disable-over-current;
675 status = "okay";
676};
677
678&usdhc1 {
679 pinctrl-names = "default";
680 pinctrl-0 = <&pinctrl_usdhc1>;
681 bus-width = <4>;
682 no-1-8-v;
Dong Aisheng89c1a8cf2015-07-22 20:53:02 +0800[diff] [blame]683 cd-gpios = <&gpio7 2 GPIO_ACTIVE_LOW>;
Lothar Waßmannc8787ba2014-06-12 15:05:17 +0200[diff] [blame]684 fsl,wp-controller;
685 status = "okay";
686};
687
688&usdhc2 {
689 pinctrl-names = "default";
690 pinctrl-0 = <&pinctrl_usdhc2>;
691 bus-width = <4>;
692 no-1-8-v;
Dong Aisheng89c1a8cf2015-07-22 20:53:02 +0800[diff] [blame]693 cd-gpios = <&gpio7 3 GPIO_ACTIVE_LOW>;
Lothar Waßmannc8787ba2014-06-12 15:05:17 +0200[diff] [blame]694 fsl,wp-controller;
695 status = "okay";
696};