Michael Wu | eff1a59 | 2007-09-25 18:11:01 -0700 | [diff] [blame] | 1 | |
| 2 | /* |
| 3 | * Linux device driver for USB based Prism54 |
| 4 | * |
| 5 | * Copyright (c) 2006, Michael Wu <flamingice@sourmilk.net> |
| 6 | * |
| 7 | * Based on the islsm (softmac prism54) driver, which is: |
| 8 | * Copyright 2004-2006 Jean-Baptiste Note <jbnote@gmail.com>, et al. |
| 9 | * |
| 10 | * This program is free software; you can redistribute it and/or modify |
| 11 | * it under the terms of the GNU General Public License version 2 as |
| 12 | * published by the Free Software Foundation. |
| 13 | */ |
| 14 | |
| 15 | #include <linux/init.h> |
| 16 | #include <linux/usb.h> |
| 17 | #include <linux/pci.h> |
| 18 | #include <linux/firmware.h> |
| 19 | #include <linux/etherdevice.h> |
| 20 | #include <linux/delay.h> |
| 21 | #include <linux/crc32.h> |
| 22 | #include <net/mac80211.h> |
| 23 | |
| 24 | #include "p54.h" |
| 25 | #include "p54usb.h" |
| 26 | |
| 27 | MODULE_AUTHOR("Michael Wu <flamingice@sourmilk.net>"); |
| 28 | MODULE_DESCRIPTION("Prism54 USB wireless driver"); |
| 29 | MODULE_LICENSE("GPL"); |
| 30 | MODULE_ALIAS("prism54usb"); |
| 31 | |
| 32 | static struct usb_device_id p54u_table[] __devinitdata = { |
| 33 | /* Version 1 devices (pci chip + net2280) */ |
| 34 | {USB_DEVICE(0x0506, 0x0a11)}, /* 3COM 3CRWE254G72 */ |
| 35 | {USB_DEVICE(0x0707, 0xee06)}, /* SMC 2862W-G */ |
| 36 | {USB_DEVICE(0x083a, 0x4501)}, /* Accton 802.11g WN4501 USB */ |
| 37 | {USB_DEVICE(0x083a, 0x4502)}, /* Siemens Gigaset USB Adapter */ |
Ivo Couckuyt | 1a17582 | 2008-02-20 14:58:00 -0500 | [diff] [blame] | 38 | {USB_DEVICE(0x083a, 0x5501)}, /* Phillips CPWUA054 */ |
Michael Wu | eff1a59 | 2007-09-25 18:11:01 -0700 | [diff] [blame] | 39 | {USB_DEVICE(0x0846, 0x4200)}, /* Netgear WG121 */ |
| 40 | {USB_DEVICE(0x0846, 0x4210)}, /* Netgear WG121 the second ? */ |
| 41 | {USB_DEVICE(0x0846, 0x4220)}, /* Netgear WG111 */ |
| 42 | {USB_DEVICE(0x0cde, 0x0006)}, /* Medion 40900, Roper Europe */ |
| 43 | {USB_DEVICE(0x124a, 0x4023)}, /* Shuttle PN15, Airvast WM168g, IOGear GWU513 */ |
| 44 | {USB_DEVICE(0x1915, 0x2234)}, /* Linksys WUSB54G OEM */ |
| 45 | {USB_DEVICE(0x1915, 0x2235)}, /* Linksys WUSB54G Portable OEM */ |
| 46 | {USB_DEVICE(0x2001, 0x3701)}, /* DLink DWL-G120 Spinnaker */ |
| 47 | {USB_DEVICE(0x2001, 0x3703)}, /* DLink DWL-G122 */ |
| 48 | {USB_DEVICE(0x5041, 0x2234)}, /* Linksys WUSB54G */ |
| 49 | {USB_DEVICE(0x5041, 0x2235)}, /* Linksys WUSB54G Portable */ |
| 50 | |
| 51 | /* Version 2 devices (3887) */ |
| 52 | {USB_DEVICE(0x050d, 0x7050)}, /* Belkin F5D7050 ver 1000 */ |
| 53 | {USB_DEVICE(0x0572, 0x2000)}, /* Cohiba Proto board */ |
| 54 | {USB_DEVICE(0x0572, 0x2002)}, /* Cohiba Proto board */ |
| 55 | {USB_DEVICE(0x0707, 0xee13)}, /* SMC 2862W-G version 2 */ |
| 56 | {USB_DEVICE(0x083a, 0x4521)}, /* Siemens Gigaset USB Adapter 54 version 2 */ |
| 57 | {USB_DEVICE(0x0846, 0x4240)}, /* Netgear WG111 (v2) */ |
| 58 | {USB_DEVICE(0x0915, 0x2000)}, /* Cohiba Proto board */ |
| 59 | {USB_DEVICE(0x0915, 0x2002)}, /* Cohiba Proto board */ |
| 60 | {USB_DEVICE(0x0baf, 0x0118)}, /* U.S. Robotics U5 802.11g Adapter*/ |
| 61 | {USB_DEVICE(0x0bf8, 0x1009)}, /* FUJITSU E-5400 USB D1700*/ |
| 62 | {USB_DEVICE(0x0cde, 0x0006)}, /* Medion MD40900 */ |
| 63 | {USB_DEVICE(0x0cde, 0x0008)}, /* Sagem XG703A */ |
| 64 | {USB_DEVICE(0x0d8e, 0x3762)}, /* DLink DWL-G120 Cohiba */ |
| 65 | {USB_DEVICE(0x09aa, 0x1000)}, /* Spinnaker Proto board */ |
Jan Slupski | 43557e1 | 2008-03-10 22:41:18 -0700 | [diff] [blame] | 66 | {USB_DEVICE(0x124a, 0x4025)}, /* IOGear GWU513 (GW3887IK chip) */ |
John W. Linville | 387e100 | 2008-02-20 15:06:02 -0500 | [diff] [blame] | 67 | {USB_DEVICE(0x13b1, 0x000a)}, /* Linksys WUSB54G ver 2 */ |
Martti Huttunen | c109810 | 2007-10-04 00:06:00 -0400 | [diff] [blame] | 68 | {USB_DEVICE(0x13B1, 0x000C)}, /* Linksys WUSB54AG */ |
Michael Wu | eff1a59 | 2007-09-25 18:11:01 -0700 | [diff] [blame] | 69 | {USB_DEVICE(0x1435, 0x0427)}, /* Inventel UR054G */ |
| 70 | {USB_DEVICE(0x2001, 0x3704)}, /* DLink DWL-G122 rev A2 */ |
| 71 | {USB_DEVICE(0x413c, 0x8102)}, /* Spinnaker DUT */ |
| 72 | {USB_DEVICE(0x413c, 0x8104)}, /* Cohiba Proto board */ |
| 73 | {} |
| 74 | }; |
| 75 | |
| 76 | MODULE_DEVICE_TABLE(usb, p54u_table); |
| 77 | |
| 78 | static void p54u_rx_cb(struct urb *urb) |
| 79 | { |
| 80 | struct sk_buff *skb = (struct sk_buff *) urb->context; |
| 81 | struct p54u_rx_info *info = (struct p54u_rx_info *)skb->cb; |
| 82 | struct ieee80211_hw *dev = info->dev; |
| 83 | struct p54u_priv *priv = dev->priv; |
| 84 | |
| 85 | if (unlikely(urb->status)) { |
| 86 | info->urb = NULL; |
| 87 | usb_free_urb(urb); |
| 88 | return; |
| 89 | } |
| 90 | |
| 91 | skb_unlink(skb, &priv->rx_queue); |
| 92 | skb_put(skb, urb->actual_length); |
| 93 | if (!priv->hw_type) |
| 94 | skb_pull(skb, sizeof(struct net2280_tx_hdr)); |
| 95 | |
| 96 | if (p54_rx(dev, skb)) { |
| 97 | skb = dev_alloc_skb(MAX_RX_SIZE); |
| 98 | if (unlikely(!skb)) { |
| 99 | usb_free_urb(urb); |
| 100 | /* TODO check rx queue length and refill *somewhere* */ |
| 101 | return; |
| 102 | } |
| 103 | |
| 104 | info = (struct p54u_rx_info *) skb->cb; |
| 105 | info->urb = urb; |
| 106 | info->dev = dev; |
| 107 | urb->transfer_buffer = skb_tail_pointer(skb); |
| 108 | urb->context = skb; |
| 109 | skb_queue_tail(&priv->rx_queue, skb); |
| 110 | } else { |
| 111 | skb_trim(skb, 0); |
| 112 | skb_queue_tail(&priv->rx_queue, skb); |
| 113 | } |
| 114 | |
| 115 | usb_submit_urb(urb, GFP_ATOMIC); |
| 116 | } |
| 117 | |
| 118 | static void p54u_tx_cb(struct urb *urb) |
| 119 | { |
| 120 | usb_free_urb(urb); |
| 121 | } |
| 122 | |
| 123 | static void p54u_tx_free_cb(struct urb *urb) |
| 124 | { |
| 125 | kfree(urb->transfer_buffer); |
| 126 | usb_free_urb(urb); |
| 127 | } |
| 128 | |
| 129 | static int p54u_init_urbs(struct ieee80211_hw *dev) |
| 130 | { |
| 131 | struct p54u_priv *priv = dev->priv; |
| 132 | struct urb *entry; |
| 133 | struct sk_buff *skb; |
| 134 | struct p54u_rx_info *info; |
| 135 | |
| 136 | while (skb_queue_len(&priv->rx_queue) < 32) { |
| 137 | skb = __dev_alloc_skb(MAX_RX_SIZE, GFP_KERNEL); |
| 138 | if (!skb) |
| 139 | break; |
| 140 | entry = usb_alloc_urb(0, GFP_KERNEL); |
| 141 | if (!entry) { |
| 142 | kfree_skb(skb); |
| 143 | break; |
| 144 | } |
| 145 | usb_fill_bulk_urb(entry, priv->udev, usb_rcvbulkpipe(priv->udev, P54U_PIPE_DATA), skb_tail_pointer(skb), MAX_RX_SIZE, p54u_rx_cb, skb); |
| 146 | info = (struct p54u_rx_info *) skb->cb; |
| 147 | info->urb = entry; |
| 148 | info->dev = dev; |
| 149 | skb_queue_tail(&priv->rx_queue, skb); |
| 150 | usb_submit_urb(entry, GFP_KERNEL); |
| 151 | } |
| 152 | |
| 153 | return 0; |
| 154 | } |
| 155 | |
| 156 | static void p54u_free_urbs(struct ieee80211_hw *dev) |
| 157 | { |
| 158 | struct p54u_priv *priv = dev->priv; |
| 159 | struct p54u_rx_info *info; |
| 160 | struct sk_buff *skb; |
| 161 | |
| 162 | while ((skb = skb_dequeue(&priv->rx_queue))) { |
| 163 | info = (struct p54u_rx_info *) skb->cb; |
| 164 | if (!info->urb) |
| 165 | continue; |
| 166 | |
| 167 | usb_kill_urb(info->urb); |
| 168 | kfree_skb(skb); |
| 169 | } |
| 170 | } |
| 171 | |
| 172 | static void p54u_tx_3887(struct ieee80211_hw *dev, struct p54_control_hdr *data, |
| 173 | size_t len, int free_on_tx) |
| 174 | { |
| 175 | struct p54u_priv *priv = dev->priv; |
| 176 | struct urb *addr_urb, *data_urb; |
| 177 | |
| 178 | addr_urb = usb_alloc_urb(0, GFP_ATOMIC); |
| 179 | if (!addr_urb) |
| 180 | return; |
| 181 | |
| 182 | data_urb = usb_alloc_urb(0, GFP_ATOMIC); |
| 183 | if (!data_urb) { |
| 184 | usb_free_urb(addr_urb); |
| 185 | return; |
| 186 | } |
| 187 | |
| 188 | usb_fill_bulk_urb(addr_urb, priv->udev, |
| 189 | usb_sndbulkpipe(priv->udev, P54U_PIPE_DATA), &data->req_id, |
| 190 | sizeof(data->req_id), p54u_tx_cb, dev); |
| 191 | usb_fill_bulk_urb(data_urb, priv->udev, |
| 192 | usb_sndbulkpipe(priv->udev, P54U_PIPE_DATA), data, len, |
| 193 | free_on_tx ? p54u_tx_free_cb : p54u_tx_cb, dev); |
| 194 | |
| 195 | usb_submit_urb(addr_urb, GFP_ATOMIC); |
| 196 | usb_submit_urb(data_urb, GFP_ATOMIC); |
| 197 | } |
| 198 | |
| 199 | static void p54u_tx_net2280(struct ieee80211_hw *dev, struct p54_control_hdr *data, |
| 200 | size_t len, int free_on_tx) |
| 201 | { |
| 202 | struct p54u_priv *priv = dev->priv; |
| 203 | struct urb *int_urb, *data_urb; |
| 204 | struct net2280_tx_hdr *hdr; |
| 205 | struct net2280_reg_write *reg; |
| 206 | |
| 207 | reg = kmalloc(sizeof(*reg), GFP_ATOMIC); |
| 208 | if (!reg) |
| 209 | return; |
| 210 | |
| 211 | int_urb = usb_alloc_urb(0, GFP_ATOMIC); |
| 212 | if (!int_urb) { |
| 213 | kfree(reg); |
| 214 | return; |
| 215 | } |
| 216 | |
| 217 | data_urb = usb_alloc_urb(0, GFP_ATOMIC); |
| 218 | if (!data_urb) { |
| 219 | kfree(reg); |
| 220 | usb_free_urb(int_urb); |
| 221 | return; |
| 222 | } |
| 223 | |
| 224 | reg->port = cpu_to_le16(NET2280_DEV_U32); |
| 225 | reg->addr = cpu_to_le32(P54U_DEV_BASE); |
| 226 | reg->val = cpu_to_le32(ISL38XX_DEV_INT_DATA); |
| 227 | |
| 228 | len += sizeof(*data); |
| 229 | hdr = (void *)data - sizeof(*hdr); |
| 230 | memset(hdr, 0, sizeof(*hdr)); |
| 231 | hdr->device_addr = data->req_id; |
| 232 | hdr->len = cpu_to_le16(len); |
| 233 | |
| 234 | usb_fill_bulk_urb(int_urb, priv->udev, |
| 235 | usb_sndbulkpipe(priv->udev, P54U_PIPE_DEV), reg, sizeof(*reg), |
| 236 | p54u_tx_free_cb, dev); |
| 237 | usb_submit_urb(int_urb, GFP_ATOMIC); |
| 238 | |
| 239 | usb_fill_bulk_urb(data_urb, priv->udev, |
| 240 | usb_sndbulkpipe(priv->udev, P54U_PIPE_DATA), hdr, len + sizeof(*hdr), |
| 241 | free_on_tx ? p54u_tx_free_cb : p54u_tx_cb, dev); |
| 242 | usb_submit_urb(data_urb, GFP_ATOMIC); |
| 243 | } |
| 244 | |
| 245 | static int p54u_write(struct p54u_priv *priv, |
| 246 | struct net2280_reg_write *buf, |
| 247 | enum net2280_op_type type, |
| 248 | __le32 addr, __le32 val) |
| 249 | { |
| 250 | unsigned int ep; |
| 251 | int alen; |
| 252 | |
| 253 | if (type & 0x0800) |
| 254 | ep = usb_sndbulkpipe(priv->udev, P54U_PIPE_DEV); |
| 255 | else |
| 256 | ep = usb_sndbulkpipe(priv->udev, P54U_PIPE_BRG); |
| 257 | |
| 258 | buf->port = cpu_to_le16(type); |
| 259 | buf->addr = addr; |
| 260 | buf->val = val; |
| 261 | |
| 262 | return usb_bulk_msg(priv->udev, ep, buf, sizeof(*buf), &alen, 1000); |
| 263 | } |
| 264 | |
| 265 | static int p54u_read(struct p54u_priv *priv, void *buf, |
| 266 | enum net2280_op_type type, |
| 267 | __le32 addr, __le32 *val) |
| 268 | { |
| 269 | struct net2280_reg_read *read = buf; |
| 270 | __le32 *reg = buf; |
| 271 | unsigned int ep; |
| 272 | int alen, err; |
| 273 | |
| 274 | if (type & 0x0800) |
| 275 | ep = P54U_PIPE_DEV; |
| 276 | else |
| 277 | ep = P54U_PIPE_BRG; |
| 278 | |
| 279 | read->port = cpu_to_le16(type); |
| 280 | read->addr = addr; |
| 281 | |
| 282 | err = usb_bulk_msg(priv->udev, usb_sndbulkpipe(priv->udev, ep), |
| 283 | read, sizeof(*read), &alen, 1000); |
| 284 | if (err) |
| 285 | return err; |
| 286 | |
| 287 | err = usb_bulk_msg(priv->udev, usb_rcvbulkpipe(priv->udev, ep), |
| 288 | reg, sizeof(*reg), &alen, 1000); |
| 289 | if (err) |
| 290 | return err; |
| 291 | |
| 292 | *val = *reg; |
| 293 | return 0; |
| 294 | } |
| 295 | |
| 296 | static int p54u_bulk_msg(struct p54u_priv *priv, unsigned int ep, |
| 297 | void *data, size_t len) |
| 298 | { |
| 299 | int alen; |
| 300 | return usb_bulk_msg(priv->udev, usb_sndbulkpipe(priv->udev, ep), |
| 301 | data, len, &alen, 2000); |
| 302 | } |
| 303 | |
| 304 | static int p54u_read_eeprom(struct ieee80211_hw *dev) |
| 305 | { |
| 306 | struct p54u_priv *priv = dev->priv; |
| 307 | void *buf; |
| 308 | struct p54_control_hdr *hdr; |
| 309 | int err, alen; |
| 310 | size_t offset = priv->hw_type ? 0x10 : 0x20; |
| 311 | |
| 312 | buf = kmalloc(0x2020, GFP_KERNEL); |
| 313 | if (!buf) { |
Joe Perches | 8376e7a | 2007-11-19 17:48:27 -0800 | [diff] [blame] | 314 | printk(KERN_ERR "prism54usb: cannot allocate memory for " |
Michael Wu | eff1a59 | 2007-09-25 18:11:01 -0700 | [diff] [blame] | 315 | "eeprom readback!\n"); |
| 316 | return -ENOMEM; |
| 317 | } |
| 318 | |
| 319 | if (priv->hw_type) { |
| 320 | *((u32 *) buf) = priv->common.rx_start; |
| 321 | err = p54u_bulk_msg(priv, P54U_PIPE_DATA, buf, sizeof(u32)); |
| 322 | if (err) { |
| 323 | printk(KERN_ERR "prism54usb: addr send failed\n"); |
| 324 | goto fail; |
| 325 | } |
| 326 | } else { |
| 327 | struct net2280_reg_write *reg = buf; |
| 328 | reg->port = cpu_to_le16(NET2280_DEV_U32); |
| 329 | reg->addr = cpu_to_le32(P54U_DEV_BASE); |
| 330 | reg->val = cpu_to_le32(ISL38XX_DEV_INT_DATA); |
| 331 | err = p54u_bulk_msg(priv, P54U_PIPE_DEV, buf, sizeof(*reg)); |
| 332 | if (err) { |
| 333 | printk(KERN_ERR "prism54usb: dev_int send failed\n"); |
| 334 | goto fail; |
| 335 | } |
| 336 | } |
| 337 | |
| 338 | hdr = buf + priv->common.tx_hdr_len; |
| 339 | p54_fill_eeprom_readback(hdr); |
| 340 | hdr->req_id = cpu_to_le32(priv->common.rx_start); |
| 341 | if (priv->common.tx_hdr_len) { |
| 342 | struct net2280_tx_hdr *tx_hdr = buf; |
| 343 | tx_hdr->device_addr = hdr->req_id; |
| 344 | tx_hdr->len = cpu_to_le16(EEPROM_READBACK_LEN); |
| 345 | } |
| 346 | |
| 347 | /* we can just pretend to send 0x2000 bytes of nothing in the headers */ |
| 348 | err = p54u_bulk_msg(priv, P54U_PIPE_DATA, buf, |
| 349 | EEPROM_READBACK_LEN + priv->common.tx_hdr_len); |
| 350 | if (err) { |
| 351 | printk(KERN_ERR "prism54usb: eeprom req send failed\n"); |
| 352 | goto fail; |
| 353 | } |
| 354 | |
| 355 | err = usb_bulk_msg(priv->udev, |
| 356 | usb_rcvbulkpipe(priv->udev, P54U_PIPE_DATA), |
| 357 | buf, 0x2020, &alen, 1000); |
| 358 | if (!err && alen > offset) { |
| 359 | p54_parse_eeprom(dev, (u8 *)buf + offset, alen - offset); |
| 360 | } else { |
| 361 | printk(KERN_ERR "prism54usb: eeprom read failed!\n"); |
| 362 | err = -EINVAL; |
| 363 | goto fail; |
| 364 | } |
| 365 | |
| 366 | fail: |
| 367 | kfree(buf); |
| 368 | return err; |
| 369 | } |
| 370 | |
| 371 | static int p54u_upload_firmware_3887(struct ieee80211_hw *dev) |
| 372 | { |
| 373 | static char start_string[] = "~~~~<\r"; |
| 374 | struct p54u_priv *priv = dev->priv; |
| 375 | const struct firmware *fw_entry = NULL; |
| 376 | int err, alen; |
| 377 | u8 carry = 0; |
| 378 | u8 *buf, *tmp, *data; |
| 379 | unsigned int left, remains, block_size; |
| 380 | struct x2_header *hdr; |
| 381 | unsigned long timeout; |
| 382 | |
| 383 | tmp = buf = kmalloc(P54U_FW_BLOCK, GFP_KERNEL); |
| 384 | if (!buf) { |
| 385 | printk(KERN_ERR "p54usb: cannot allocate firmware upload buffer!\n"); |
| 386 | err = -ENOMEM; |
| 387 | goto err_bufalloc; |
| 388 | } |
| 389 | |
| 390 | memcpy(buf, start_string, 4); |
| 391 | err = p54u_bulk_msg(priv, P54U_PIPE_DATA, buf, 4); |
| 392 | if (err) { |
| 393 | printk(KERN_ERR "p54usb: reset failed! (%d)\n", err); |
| 394 | goto err_reset; |
| 395 | } |
| 396 | |
| 397 | err = request_firmware(&fw_entry, "isl3887usb_bare", &priv->udev->dev); |
| 398 | if (err) { |
| 399 | printk(KERN_ERR "p54usb: cannot find firmware (isl3887usb_bare)!\n"); |
| 400 | goto err_req_fw_failed; |
| 401 | } |
| 402 | |
| 403 | p54_parse_firmware(dev, fw_entry); |
| 404 | |
| 405 | left = block_size = min((size_t)P54U_FW_BLOCK, fw_entry->size); |
| 406 | strcpy(buf, start_string); |
| 407 | left -= strlen(start_string); |
| 408 | tmp += strlen(start_string); |
| 409 | |
| 410 | data = fw_entry->data; |
| 411 | remains = fw_entry->size; |
| 412 | |
| 413 | hdr = (struct x2_header *)(buf + strlen(start_string)); |
| 414 | memcpy(hdr->signature, X2_SIGNATURE, X2_SIGNATURE_SIZE); |
| 415 | hdr->fw_load_addr = cpu_to_le32(ISL38XX_DEV_FIRMWARE_ADDR); |
| 416 | hdr->fw_length = cpu_to_le32(fw_entry->size); |
| 417 | hdr->crc = cpu_to_le32(~crc32_le(~0, (void *)&hdr->fw_load_addr, |
| 418 | sizeof(u32)*2)); |
| 419 | left -= sizeof(*hdr); |
| 420 | tmp += sizeof(*hdr); |
| 421 | |
| 422 | while (remains) { |
| 423 | while (left--) { |
| 424 | if (carry) { |
| 425 | *tmp++ = carry; |
| 426 | carry = 0; |
| 427 | remains--; |
| 428 | continue; |
| 429 | } |
| 430 | switch (*data) { |
| 431 | case '~': |
| 432 | *tmp++ = '}'; |
| 433 | carry = '^'; |
| 434 | break; |
| 435 | case '}': |
| 436 | *tmp++ = '}'; |
| 437 | carry = ']'; |
| 438 | break; |
| 439 | default: |
| 440 | *tmp++ = *data; |
| 441 | remains--; |
| 442 | break; |
| 443 | } |
| 444 | data++; |
| 445 | } |
| 446 | |
| 447 | err = p54u_bulk_msg(priv, P54U_PIPE_DATA, buf, block_size); |
| 448 | if (err) { |
| 449 | printk(KERN_ERR "prism54usb: firmware upload failed!\n"); |
| 450 | goto err_upload_failed; |
| 451 | } |
| 452 | |
| 453 | tmp = buf; |
| 454 | left = block_size = min((unsigned int)P54U_FW_BLOCK, remains); |
| 455 | } |
| 456 | |
| 457 | *((__le32 *)buf) = cpu_to_le32(~crc32_le(~0, fw_entry->data, fw_entry->size)); |
| 458 | err = p54u_bulk_msg(priv, P54U_PIPE_DATA, buf, sizeof(u32)); |
| 459 | if (err) { |
| 460 | printk(KERN_ERR "prism54usb: firmware upload failed!\n"); |
| 461 | goto err_upload_failed; |
| 462 | } |
| 463 | |
| 464 | timeout = jiffies + msecs_to_jiffies(1000); |
| 465 | while (!(err = usb_bulk_msg(priv->udev, |
| 466 | usb_rcvbulkpipe(priv->udev, P54U_PIPE_DATA), buf, 128, &alen, 1000))) { |
| 467 | if (alen > 2 && !memcmp(buf, "OK", 2)) |
| 468 | break; |
| 469 | |
| 470 | if (alen > 5 && !memcmp(buf, "ERROR", 5)) { |
| 471 | printk(KERN_INFO "prism54usb: firmware upload failed!\n"); |
| 472 | err = -EINVAL; |
| 473 | break; |
| 474 | } |
| 475 | |
| 476 | if (time_after(jiffies, timeout)) { |
| 477 | printk(KERN_ERR "prism54usb: firmware boot timed out!\n"); |
| 478 | err = -ETIMEDOUT; |
| 479 | break; |
| 480 | } |
| 481 | } |
| 482 | if (err) |
| 483 | goto err_upload_failed; |
| 484 | |
| 485 | buf[0] = 'g'; |
| 486 | buf[1] = '\r'; |
| 487 | err = p54u_bulk_msg(priv, P54U_PIPE_DATA, buf, 2); |
| 488 | if (err) { |
| 489 | printk(KERN_ERR "prism54usb: firmware boot failed!\n"); |
| 490 | goto err_upload_failed; |
| 491 | } |
| 492 | |
| 493 | timeout = jiffies + msecs_to_jiffies(1000); |
| 494 | while (!(err = usb_bulk_msg(priv->udev, |
| 495 | usb_rcvbulkpipe(priv->udev, P54U_PIPE_DATA), buf, 128, &alen, 1000))) { |
| 496 | if (alen > 0 && buf[0] == 'g') |
| 497 | break; |
| 498 | |
| 499 | if (time_after(jiffies, timeout)) { |
| 500 | err = -ETIMEDOUT; |
| 501 | break; |
| 502 | } |
| 503 | } |
| 504 | if (err) |
| 505 | goto err_upload_failed; |
| 506 | |
| 507 | err_upload_failed: |
| 508 | release_firmware(fw_entry); |
| 509 | err_req_fw_failed: |
| 510 | err_reset: |
| 511 | kfree(buf); |
| 512 | err_bufalloc: |
| 513 | return err; |
| 514 | } |
| 515 | |
| 516 | static int p54u_upload_firmware_net2280(struct ieee80211_hw *dev) |
| 517 | { |
| 518 | struct p54u_priv *priv = dev->priv; |
| 519 | const struct firmware *fw_entry = NULL; |
| 520 | const struct p54p_csr *devreg = (const struct p54p_csr *) P54U_DEV_BASE; |
| 521 | int err, alen; |
| 522 | void *buf; |
| 523 | __le32 reg; |
| 524 | unsigned int remains, offset; |
| 525 | u8 *data; |
| 526 | |
| 527 | buf = kmalloc(512, GFP_KERNEL); |
| 528 | if (!buf) { |
| 529 | printk(KERN_ERR "p54usb: firmware buffer alloc failed!\n"); |
| 530 | return -ENOMEM; |
| 531 | } |
| 532 | |
| 533 | err = request_firmware(&fw_entry, "isl3890usb", &priv->udev->dev); |
| 534 | if (err) { |
| 535 | printk(KERN_ERR "p54usb: cannot find firmware (isl3890usb)!\n"); |
| 536 | kfree(buf); |
| 537 | return err; |
| 538 | } |
| 539 | |
| 540 | p54_parse_firmware(dev, fw_entry); |
| 541 | |
| 542 | #define P54U_WRITE(type, addr, data) \ |
| 543 | do {\ |
| 544 | err = p54u_write(priv, buf, type,\ |
| 545 | cpu_to_le32((u32)(unsigned long)addr), data);\ |
| 546 | if (err) \ |
| 547 | goto fail;\ |
| 548 | } while (0) |
| 549 | |
| 550 | #define P54U_READ(type, addr) \ |
| 551 | do {\ |
| 552 | err = p54u_read(priv, buf, type,\ |
| 553 | cpu_to_le32((u32)(unsigned long)addr), ®);\ |
| 554 | if (err)\ |
| 555 | goto fail;\ |
| 556 | } while (0) |
| 557 | |
| 558 | /* power down net2280 bridge */ |
| 559 | P54U_READ(NET2280_BRG_U32, NET2280_GPIOCTL); |
| 560 | reg |= cpu_to_le32(P54U_BRG_POWER_DOWN); |
| 561 | reg &= cpu_to_le32(~P54U_BRG_POWER_UP); |
| 562 | P54U_WRITE(NET2280_BRG_U32, NET2280_GPIOCTL, reg); |
| 563 | |
| 564 | mdelay(100); |
| 565 | |
| 566 | /* power up bridge */ |
| 567 | reg |= cpu_to_le32(P54U_BRG_POWER_UP); |
| 568 | reg &= cpu_to_le32(~P54U_BRG_POWER_DOWN); |
| 569 | P54U_WRITE(NET2280_BRG_U32, NET2280_GPIOCTL, reg); |
| 570 | |
| 571 | mdelay(100); |
| 572 | |
| 573 | P54U_WRITE(NET2280_BRG_U32, NET2280_DEVINIT, |
| 574 | cpu_to_le32(NET2280_CLK_30Mhz | |
| 575 | NET2280_PCI_ENABLE | |
| 576 | NET2280_PCI_SOFT_RESET)); |
| 577 | |
| 578 | mdelay(20); |
| 579 | |
| 580 | P54U_WRITE(NET2280_BRG_CFG_U16, PCI_COMMAND, |
| 581 | cpu_to_le32(PCI_COMMAND_MEMORY | |
| 582 | PCI_COMMAND_MASTER)); |
| 583 | |
| 584 | P54U_WRITE(NET2280_BRG_CFG_U32, PCI_BASE_ADDRESS_0, |
| 585 | cpu_to_le32(NET2280_BASE)); |
| 586 | |
| 587 | P54U_READ(NET2280_BRG_CFG_U16, PCI_STATUS); |
| 588 | reg |= cpu_to_le32(PCI_STATUS_REC_MASTER_ABORT); |
| 589 | P54U_WRITE(NET2280_BRG_CFG_U16, PCI_STATUS, reg); |
| 590 | |
| 591 | // TODO: we really need this? |
| 592 | P54U_READ(NET2280_BRG_U32, NET2280_RELNUM); |
| 593 | |
| 594 | P54U_WRITE(NET2280_BRG_U32, NET2280_EPA_RSP, |
| 595 | cpu_to_le32(NET2280_CLEAR_NAK_OUT_PACKETS_MODE)); |
| 596 | P54U_WRITE(NET2280_BRG_U32, NET2280_EPC_RSP, |
| 597 | cpu_to_le32(NET2280_CLEAR_NAK_OUT_PACKETS_MODE)); |
| 598 | |
| 599 | P54U_WRITE(NET2280_BRG_CFG_U32, PCI_BASE_ADDRESS_2, |
| 600 | cpu_to_le32(NET2280_BASE2)); |
| 601 | |
| 602 | /* finally done setting up the bridge */ |
| 603 | |
| 604 | P54U_WRITE(NET2280_DEV_CFG_U16, 0x10000 | PCI_COMMAND, |
| 605 | cpu_to_le32(PCI_COMMAND_MEMORY | |
| 606 | PCI_COMMAND_MASTER)); |
| 607 | |
| 608 | P54U_WRITE(NET2280_DEV_CFG_U16, 0x10000 | 0x40 /* TRDY timeout */, 0); |
| 609 | P54U_WRITE(NET2280_DEV_CFG_U32, 0x10000 | PCI_BASE_ADDRESS_0, |
| 610 | cpu_to_le32(P54U_DEV_BASE)); |
| 611 | |
| 612 | P54U_WRITE(NET2280_BRG_U32, NET2280_USBIRQENB1, 0); |
| 613 | P54U_WRITE(NET2280_BRG_U32, NET2280_IRQSTAT1, |
| 614 | cpu_to_le32(NET2280_PCI_INTA_INTERRUPT)); |
| 615 | |
| 616 | /* do romboot */ |
| 617 | P54U_WRITE(NET2280_DEV_U32, &devreg->int_enable, 0); |
| 618 | |
| 619 | P54U_READ(NET2280_DEV_U32, &devreg->ctrl_stat); |
| 620 | reg &= cpu_to_le32(~ISL38XX_CTRL_STAT_RESET); |
| 621 | reg &= cpu_to_le32(~ISL38XX_CTRL_STAT_RAMBOOT); |
| 622 | reg &= cpu_to_le32(~ISL38XX_CTRL_STAT_CLKRUN); |
| 623 | P54U_WRITE(NET2280_DEV_U32, &devreg->ctrl_stat, reg); |
| 624 | |
| 625 | mdelay(20); |
| 626 | |
| 627 | reg |= cpu_to_le32(ISL38XX_CTRL_STAT_RESET); |
| 628 | P54U_WRITE(NET2280_DEV_U32, &devreg->ctrl_stat, reg); |
| 629 | |
| 630 | mdelay(20); |
| 631 | |
| 632 | reg &= cpu_to_le32(~ISL38XX_CTRL_STAT_RESET); |
| 633 | P54U_WRITE(NET2280_DEV_U32, &devreg->ctrl_stat, reg); |
| 634 | |
| 635 | mdelay(100); |
| 636 | |
| 637 | P54U_READ(NET2280_DEV_U32, &devreg->int_ident); |
| 638 | P54U_WRITE(NET2280_DEV_U32, &devreg->int_ack, reg); |
| 639 | |
| 640 | /* finally, we can upload firmware now! */ |
| 641 | remains = fw_entry->size; |
| 642 | data = fw_entry->data; |
| 643 | offset = ISL38XX_DEV_FIRMWARE_ADDR; |
| 644 | |
| 645 | while (remains) { |
| 646 | unsigned int block_len = min(remains, (unsigned int)512); |
| 647 | memcpy(buf, data, block_len); |
| 648 | |
| 649 | err = p54u_bulk_msg(priv, P54U_PIPE_DATA, buf, block_len); |
| 650 | if (err) { |
| 651 | printk(KERN_ERR "prism54usb: firmware block upload " |
| 652 | "failed\n"); |
| 653 | goto fail; |
| 654 | } |
| 655 | |
| 656 | P54U_WRITE(NET2280_DEV_U32, &devreg->direct_mem_base, |
| 657 | cpu_to_le32(0xc0000f00)); |
| 658 | |
| 659 | P54U_WRITE(NET2280_DEV_U32, |
| 660 | 0x0020 | (unsigned long)&devreg->direct_mem_win, 0); |
| 661 | P54U_WRITE(NET2280_DEV_U32, |
| 662 | 0x0020 | (unsigned long)&devreg->direct_mem_win, |
| 663 | cpu_to_le32(1)); |
| 664 | |
| 665 | P54U_WRITE(NET2280_DEV_U32, |
| 666 | 0x0024 | (unsigned long)&devreg->direct_mem_win, |
| 667 | cpu_to_le32(block_len)); |
| 668 | P54U_WRITE(NET2280_DEV_U32, |
| 669 | 0x0028 | (unsigned long)&devreg->direct_mem_win, |
| 670 | cpu_to_le32(offset)); |
| 671 | |
| 672 | P54U_WRITE(NET2280_DEV_U32, &devreg->dma_addr, |
| 673 | cpu_to_le32(NET2280_EPA_FIFO_PCI_ADDR)); |
| 674 | P54U_WRITE(NET2280_DEV_U32, &devreg->dma_len, |
| 675 | cpu_to_le32(block_len >> 2)); |
| 676 | P54U_WRITE(NET2280_DEV_U32, &devreg->dma_ctrl, |
| 677 | cpu_to_le32(ISL38XX_DMA_MASTER_CONTROL_TRIGGER)); |
| 678 | |
| 679 | mdelay(10); |
| 680 | |
| 681 | P54U_READ(NET2280_DEV_U32, |
| 682 | 0x002C | (unsigned long)&devreg->direct_mem_win); |
| 683 | if (!(reg & cpu_to_le32(ISL38XX_DMA_STATUS_DONE)) || |
| 684 | !(reg & cpu_to_le32(ISL38XX_DMA_STATUS_READY))) { |
| 685 | printk(KERN_ERR "prism54usb: firmware DMA transfer " |
| 686 | "failed\n"); |
| 687 | goto fail; |
| 688 | } |
| 689 | |
| 690 | P54U_WRITE(NET2280_BRG_U32, NET2280_EPA_STAT, |
| 691 | cpu_to_le32(NET2280_FIFO_FLUSH)); |
| 692 | |
| 693 | remains -= block_len; |
| 694 | data += block_len; |
| 695 | offset += block_len; |
| 696 | } |
| 697 | |
| 698 | /* do ramboot */ |
| 699 | P54U_READ(NET2280_DEV_U32, &devreg->ctrl_stat); |
| 700 | reg &= cpu_to_le32(~ISL38XX_CTRL_STAT_RESET); |
| 701 | reg &= cpu_to_le32(~ISL38XX_CTRL_STAT_CLKRUN); |
| 702 | reg |= cpu_to_le32(ISL38XX_CTRL_STAT_RAMBOOT); |
| 703 | P54U_WRITE(NET2280_DEV_U32, &devreg->ctrl_stat, reg); |
| 704 | |
| 705 | mdelay(20); |
| 706 | |
| 707 | reg |= cpu_to_le32(ISL38XX_CTRL_STAT_RESET); |
| 708 | P54U_WRITE(NET2280_DEV_U32, &devreg->ctrl_stat, reg); |
| 709 | |
| 710 | reg &= cpu_to_le32(~ISL38XX_CTRL_STAT_RESET); |
| 711 | P54U_WRITE(NET2280_DEV_U32, &devreg->ctrl_stat, reg); |
| 712 | |
| 713 | mdelay(100); |
| 714 | |
| 715 | P54U_READ(NET2280_DEV_U32, &devreg->int_ident); |
| 716 | P54U_WRITE(NET2280_DEV_U32, &devreg->int_ack, reg); |
| 717 | |
| 718 | /* start up the firmware */ |
| 719 | P54U_WRITE(NET2280_DEV_U32, &devreg->int_enable, |
| 720 | cpu_to_le32(ISL38XX_INT_IDENT_INIT)); |
| 721 | |
| 722 | P54U_WRITE(NET2280_BRG_U32, NET2280_IRQSTAT1, |
| 723 | cpu_to_le32(NET2280_PCI_INTA_INTERRUPT)); |
| 724 | |
| 725 | P54U_WRITE(NET2280_BRG_U32, NET2280_USBIRQENB1, |
| 726 | cpu_to_le32(NET2280_PCI_INTA_INTERRUPT_ENABLE | |
| 727 | NET2280_USB_INTERRUPT_ENABLE)); |
| 728 | |
| 729 | P54U_WRITE(NET2280_DEV_U32, &devreg->dev_int, |
| 730 | cpu_to_le32(ISL38XX_DEV_INT_RESET)); |
| 731 | |
| 732 | err = usb_interrupt_msg(priv->udev, |
| 733 | usb_rcvbulkpipe(priv->udev, P54U_PIPE_INT), |
| 734 | buf, sizeof(__le32), &alen, 1000); |
| 735 | if (err || alen != sizeof(__le32)) |
| 736 | goto fail; |
| 737 | |
| 738 | P54U_READ(NET2280_DEV_U32, &devreg->int_ident); |
| 739 | P54U_WRITE(NET2280_DEV_U32, &devreg->int_ack, reg); |
| 740 | |
| 741 | if (!(reg & cpu_to_le32(ISL38XX_INT_IDENT_INIT))) |
| 742 | err = -EINVAL; |
| 743 | |
| 744 | P54U_WRITE(NET2280_BRG_U32, NET2280_USBIRQENB1, 0); |
| 745 | P54U_WRITE(NET2280_BRG_U32, NET2280_IRQSTAT1, |
| 746 | cpu_to_le32(NET2280_PCI_INTA_INTERRUPT)); |
| 747 | |
| 748 | #undef P54U_WRITE |
| 749 | #undef P54U_READ |
| 750 | |
| 751 | fail: |
| 752 | release_firmware(fw_entry); |
| 753 | kfree(buf); |
| 754 | return err; |
| 755 | } |
| 756 | |
| 757 | static int p54u_open(struct ieee80211_hw *dev) |
| 758 | { |
| 759 | struct p54u_priv *priv = dev->priv; |
| 760 | int err; |
| 761 | |
| 762 | err = p54u_init_urbs(dev); |
| 763 | if (err) { |
| 764 | return err; |
| 765 | } |
| 766 | |
| 767 | priv->common.open = p54u_init_urbs; |
| 768 | |
| 769 | return 0; |
| 770 | } |
| 771 | |
| 772 | static void p54u_stop(struct ieee80211_hw *dev) |
| 773 | { |
| 774 | /* TODO: figure out how to reliably stop the 3887 and net2280 so |
| 775 | the hardware is still usable next time we want to start it. |
| 776 | until then, we just stop listening to the hardware.. */ |
| 777 | p54u_free_urbs(dev); |
| 778 | return; |
| 779 | } |
| 780 | |
| 781 | static int __devinit p54u_probe(struct usb_interface *intf, |
| 782 | const struct usb_device_id *id) |
| 783 | { |
| 784 | struct usb_device *udev = interface_to_usbdev(intf); |
| 785 | struct ieee80211_hw *dev; |
| 786 | struct p54u_priv *priv; |
| 787 | int err; |
| 788 | unsigned int i, recognized_pipes; |
| 789 | DECLARE_MAC_BUF(mac); |
| 790 | |
| 791 | dev = p54_init_common(sizeof(*priv)); |
| 792 | if (!dev) { |
| 793 | printk(KERN_ERR "prism54usb: ieee80211 alloc failed\n"); |
| 794 | return -ENOMEM; |
| 795 | } |
| 796 | |
| 797 | priv = dev->priv; |
| 798 | |
| 799 | SET_IEEE80211_DEV(dev, &intf->dev); |
| 800 | usb_set_intfdata(intf, dev); |
| 801 | priv->udev = udev; |
| 802 | |
| 803 | usb_get_dev(udev); |
| 804 | |
| 805 | /* really lazy and simple way of figuring out if we're a 3887 */ |
| 806 | /* TODO: should just stick the identification in the device table */ |
| 807 | i = intf->altsetting->desc.bNumEndpoints; |
| 808 | recognized_pipes = 0; |
| 809 | while (i--) { |
| 810 | switch (intf->altsetting->endpoint[i].desc.bEndpointAddress) { |
| 811 | case P54U_PIPE_DATA: |
| 812 | case P54U_PIPE_MGMT: |
| 813 | case P54U_PIPE_BRG: |
| 814 | case P54U_PIPE_DEV: |
| 815 | case P54U_PIPE_DATA | USB_DIR_IN: |
| 816 | case P54U_PIPE_MGMT | USB_DIR_IN: |
| 817 | case P54U_PIPE_BRG | USB_DIR_IN: |
| 818 | case P54U_PIPE_DEV | USB_DIR_IN: |
| 819 | case P54U_PIPE_INT | USB_DIR_IN: |
| 820 | recognized_pipes++; |
| 821 | } |
| 822 | } |
| 823 | priv->common.open = p54u_open; |
| 824 | |
| 825 | if (recognized_pipes < P54U_PIPE_NUMBER) { |
| 826 | priv->hw_type = P54U_3887; |
| 827 | priv->common.tx = p54u_tx_3887; |
| 828 | } else { |
| 829 | dev->extra_tx_headroom += sizeof(struct net2280_tx_hdr); |
| 830 | priv->common.tx_hdr_len = sizeof(struct net2280_tx_hdr); |
| 831 | priv->common.tx = p54u_tx_net2280; |
| 832 | } |
| 833 | priv->common.stop = p54u_stop; |
| 834 | |
| 835 | if (priv->hw_type) |
| 836 | err = p54u_upload_firmware_3887(dev); |
| 837 | else |
| 838 | err = p54u_upload_firmware_net2280(dev); |
| 839 | if (err) |
| 840 | goto err_free_dev; |
| 841 | |
| 842 | err = p54u_read_eeprom(dev); |
| 843 | if (err) |
| 844 | goto err_free_dev; |
| 845 | |
| 846 | if (!is_valid_ether_addr(dev->wiphy->perm_addr)) { |
| 847 | u8 perm_addr[ETH_ALEN]; |
| 848 | |
| 849 | printk(KERN_WARNING "prism54usb: Invalid hwaddr! Using randomly generated MAC addr\n"); |
| 850 | random_ether_addr(perm_addr); |
| 851 | SET_IEEE80211_PERM_ADDR(dev, perm_addr); |
| 852 | } |
| 853 | |
| 854 | skb_queue_head_init(&priv->rx_queue); |
| 855 | |
| 856 | err = ieee80211_register_hw(dev); |
| 857 | if (err) { |
| 858 | printk(KERN_ERR "prism54usb: Cannot register netdevice\n"); |
| 859 | goto err_free_dev; |
| 860 | } |
| 861 | |
| 862 | printk(KERN_INFO "%s: hwaddr %s, isl38%02x\n", |
| 863 | wiphy_name(dev->wiphy), |
| 864 | print_mac(mac, dev->wiphy->perm_addr), |
| 865 | priv->common.version); |
| 866 | |
| 867 | return 0; |
| 868 | |
| 869 | err_free_dev: |
| 870 | ieee80211_free_hw(dev); |
| 871 | usb_set_intfdata(intf, NULL); |
| 872 | usb_put_dev(udev); |
| 873 | return err; |
| 874 | } |
| 875 | |
| 876 | static void __devexit p54u_disconnect(struct usb_interface *intf) |
| 877 | { |
| 878 | struct ieee80211_hw *dev = usb_get_intfdata(intf); |
| 879 | struct p54u_priv *priv; |
| 880 | |
| 881 | if (!dev) |
| 882 | return; |
| 883 | |
| 884 | ieee80211_unregister_hw(dev); |
| 885 | |
| 886 | priv = dev->priv; |
| 887 | usb_put_dev(interface_to_usbdev(intf)); |
| 888 | p54_free_common(dev); |
| 889 | ieee80211_free_hw(dev); |
| 890 | } |
| 891 | |
| 892 | static struct usb_driver p54u_driver = { |
| 893 | .name = "prism54usb", |
| 894 | .id_table = p54u_table, |
| 895 | .probe = p54u_probe, |
| 896 | .disconnect = p54u_disconnect, |
| 897 | }; |
| 898 | |
| 899 | static int __init p54u_init(void) |
| 900 | { |
| 901 | return usb_register(&p54u_driver); |
| 902 | } |
| 903 | |
| 904 | static void __exit p54u_exit(void) |
| 905 | { |
| 906 | usb_deregister(&p54u_driver); |
| 907 | } |
| 908 | |
| 909 | module_init(p54u_init); |
| 910 | module_exit(p54u_exit); |