Felipe Balbi | 58a5491 | 2009-11-22 10:11:01 -0800 | [diff] [blame] | 1 | /* |
| 2 | * linux/arch/arm/mach-omap2/usb-ehci.c |
| 3 | * |
| 4 | * This file will contain the board specific details for the |
| 5 | * Synopsys EHCI host controller on OMAP3430 |
| 6 | * |
| 7 | * Copyright (C) 2007 Texas Instruments |
| 8 | * Author: Vikram Pandita <vikram.pandita@ti.com> |
| 9 | * |
| 10 | * Generalization by: |
| 11 | * Felipe Balbi <felipe.balbi@nokia.com> |
| 12 | * |
| 13 | * This program is free software; you can redistribute it and/or modify |
| 14 | * it under the terms of the GNU General Public License version 2 as |
| 15 | * published by the Free Software Foundation. |
| 16 | */ |
| 17 | |
| 18 | #include <linux/types.h> |
| 19 | #include <linux/errno.h> |
| 20 | #include <linux/delay.h> |
| 21 | #include <linux/platform_device.h> |
| 22 | #include <linux/clk.h> |
Amit Kucheria | bfb0119 | 2010-06-09 13:53:05 +0300 | [diff] [blame] | 23 | #include <linux/dma-mapping.h> |
| 24 | |
Felipe Balbi | 58a5491 | 2009-11-22 10:11:01 -0800 | [diff] [blame] | 25 | #include <asm/io.h> |
Felipe Balbi | 58a5491 | 2009-11-22 10:11:01 -0800 | [diff] [blame] | 26 | |
| 27 | #include <mach/hardware.h> |
| 28 | #include <mach/irqs.h> |
| 29 | #include <plat/usb.h> |
| 30 | |
Tony Lindgren | 4896e39 | 2009-12-11 16:16:32 -0800 | [diff] [blame] | 31 | #include "mux.h" |
| 32 | |
Felipe Balbi | 58a5491 | 2009-11-22 10:11:01 -0800 | [diff] [blame] | 33 | #if defined(CONFIG_USB_EHCI_HCD) || defined(CONFIG_USB_EHCI_HCD_MODULE) |
| 34 | |
| 35 | static struct resource ehci_resources[] = { |
| 36 | { |
Felipe Balbi | 58a5491 | 2009-11-22 10:11:01 -0800 | [diff] [blame] | 37 | .flags = IORESOURCE_MEM, |
| 38 | }, |
| 39 | { |
Felipe Balbi | 58a5491 | 2009-11-22 10:11:01 -0800 | [diff] [blame] | 40 | .flags = IORESOURCE_MEM, |
| 41 | }, |
| 42 | { |
Felipe Balbi | 58a5491 | 2009-11-22 10:11:01 -0800 | [diff] [blame] | 43 | .flags = IORESOURCE_MEM, |
| 44 | }, |
| 45 | { /* general IRQ */ |
Felipe Balbi | 58a5491 | 2009-11-22 10:11:01 -0800 | [diff] [blame] | 46 | .flags = IORESOURCE_IRQ, |
| 47 | } |
| 48 | }; |
| 49 | |
| 50 | static u64 ehci_dmamask = ~(u32)0; |
| 51 | static struct platform_device ehci_device = { |
| 52 | .name = "ehci-omap", |
| 53 | .id = 0, |
| 54 | .dev = { |
| 55 | .dma_mask = &ehci_dmamask, |
| 56 | .coherent_dma_mask = 0xffffffff, |
| 57 | .platform_data = NULL, |
| 58 | }, |
| 59 | .num_resources = ARRAY_SIZE(ehci_resources), |
| 60 | .resource = ehci_resources, |
| 61 | }; |
| 62 | |
| 63 | /* MUX settings for EHCI pins */ |
| 64 | /* |
| 65 | * setup_ehci_io_mux - initialize IO pad mux for USBHOST |
| 66 | */ |
Felipe Balbi | 6f69a18 | 2010-03-04 09:45:53 +0200 | [diff] [blame] | 67 | static void setup_ehci_io_mux(const enum ehci_hcd_omap_mode *port_mode) |
Felipe Balbi | 58a5491 | 2009-11-22 10:11:01 -0800 | [diff] [blame] | 68 | { |
| 69 | switch (port_mode[0]) { |
| 70 | case EHCI_HCD_OMAP_MODE_PHY: |
Tony Lindgren | 4896e39 | 2009-12-11 16:16:32 -0800 | [diff] [blame] | 71 | omap_mux_init_signal("hsusb1_stp", OMAP_PIN_OUTPUT); |
| 72 | omap_mux_init_signal("hsusb1_clk", OMAP_PIN_OUTPUT); |
| 73 | omap_mux_init_signal("hsusb1_dir", OMAP_PIN_INPUT_PULLDOWN); |
| 74 | omap_mux_init_signal("hsusb1_nxt", OMAP_PIN_INPUT_PULLDOWN); |
| 75 | omap_mux_init_signal("hsusb1_data0", OMAP_PIN_INPUT_PULLDOWN); |
| 76 | omap_mux_init_signal("hsusb1_data1", OMAP_PIN_INPUT_PULLDOWN); |
| 77 | omap_mux_init_signal("hsusb1_data2", OMAP_PIN_INPUT_PULLDOWN); |
| 78 | omap_mux_init_signal("hsusb1_data3", OMAP_PIN_INPUT_PULLDOWN); |
| 79 | omap_mux_init_signal("hsusb1_data4", OMAP_PIN_INPUT_PULLDOWN); |
| 80 | omap_mux_init_signal("hsusb1_data5", OMAP_PIN_INPUT_PULLDOWN); |
| 81 | omap_mux_init_signal("hsusb1_data6", OMAP_PIN_INPUT_PULLDOWN); |
| 82 | omap_mux_init_signal("hsusb1_data7", OMAP_PIN_INPUT_PULLDOWN); |
Felipe Balbi | 58a5491 | 2009-11-22 10:11:01 -0800 | [diff] [blame] | 83 | break; |
| 84 | case EHCI_HCD_OMAP_MODE_TLL: |
Tony Lindgren | 4896e39 | 2009-12-11 16:16:32 -0800 | [diff] [blame] | 85 | omap_mux_init_signal("hsusb1_tll_stp", |
| 86 | OMAP_PIN_INPUT_PULLUP); |
| 87 | omap_mux_init_signal("hsusb1_tll_clk", |
| 88 | OMAP_PIN_INPUT_PULLDOWN); |
| 89 | omap_mux_init_signal("hsusb1_tll_dir", |
| 90 | OMAP_PIN_INPUT_PULLDOWN); |
| 91 | omap_mux_init_signal("hsusb1_tll_nxt", |
| 92 | OMAP_PIN_INPUT_PULLDOWN); |
| 93 | omap_mux_init_signal("hsusb1_tll_data0", |
| 94 | OMAP_PIN_INPUT_PULLDOWN); |
| 95 | omap_mux_init_signal("hsusb1_tll_data1", |
| 96 | OMAP_PIN_INPUT_PULLDOWN); |
| 97 | omap_mux_init_signal("hsusb1_tll_data2", |
| 98 | OMAP_PIN_INPUT_PULLDOWN); |
| 99 | omap_mux_init_signal("hsusb1_tll_data3", |
| 100 | OMAP_PIN_INPUT_PULLDOWN); |
| 101 | omap_mux_init_signal("hsusb1_tll_data4", |
| 102 | OMAP_PIN_INPUT_PULLDOWN); |
| 103 | omap_mux_init_signal("hsusb1_tll_data5", |
| 104 | OMAP_PIN_INPUT_PULLDOWN); |
| 105 | omap_mux_init_signal("hsusb1_tll_data6", |
| 106 | OMAP_PIN_INPUT_PULLDOWN); |
| 107 | omap_mux_init_signal("hsusb1_tll_data7", |
| 108 | OMAP_PIN_INPUT_PULLDOWN); |
Felipe Balbi | 58a5491 | 2009-11-22 10:11:01 -0800 | [diff] [blame] | 109 | break; |
| 110 | case EHCI_HCD_OMAP_MODE_UNKNOWN: |
| 111 | /* FALLTHROUGH */ |
| 112 | default: |
| 113 | break; |
| 114 | } |
| 115 | |
| 116 | switch (port_mode[1]) { |
| 117 | case EHCI_HCD_OMAP_MODE_PHY: |
Tony Lindgren | 4896e39 | 2009-12-11 16:16:32 -0800 | [diff] [blame] | 118 | omap_mux_init_signal("hsusb2_stp", OMAP_PIN_OUTPUT); |
| 119 | omap_mux_init_signal("hsusb2_clk", OMAP_PIN_OUTPUT); |
| 120 | omap_mux_init_signal("hsusb2_dir", OMAP_PIN_INPUT_PULLDOWN); |
| 121 | omap_mux_init_signal("hsusb2_nxt", OMAP_PIN_INPUT_PULLDOWN); |
| 122 | omap_mux_init_signal("hsusb2_data0", |
| 123 | OMAP_PIN_INPUT_PULLDOWN); |
| 124 | omap_mux_init_signal("hsusb2_data1", |
| 125 | OMAP_PIN_INPUT_PULLDOWN); |
| 126 | omap_mux_init_signal("hsusb2_data2", |
| 127 | OMAP_PIN_INPUT_PULLDOWN); |
| 128 | omap_mux_init_signal("hsusb2_data3", |
| 129 | OMAP_PIN_INPUT_PULLDOWN); |
| 130 | omap_mux_init_signal("hsusb2_data4", |
| 131 | OMAP_PIN_INPUT_PULLDOWN); |
| 132 | omap_mux_init_signal("hsusb2_data5", |
| 133 | OMAP_PIN_INPUT_PULLDOWN); |
| 134 | omap_mux_init_signal("hsusb2_data6", |
| 135 | OMAP_PIN_INPUT_PULLDOWN); |
| 136 | omap_mux_init_signal("hsusb2_data7", |
| 137 | OMAP_PIN_INPUT_PULLDOWN); |
Felipe Balbi | 58a5491 | 2009-11-22 10:11:01 -0800 | [diff] [blame] | 138 | break; |
| 139 | case EHCI_HCD_OMAP_MODE_TLL: |
Tony Lindgren | 4896e39 | 2009-12-11 16:16:32 -0800 | [diff] [blame] | 140 | omap_mux_init_signal("hsusb2_tll_stp", |
| 141 | OMAP_PIN_INPUT_PULLUP); |
| 142 | omap_mux_init_signal("hsusb2_tll_clk", |
| 143 | OMAP_PIN_INPUT_PULLDOWN); |
| 144 | omap_mux_init_signal("hsusb2_tll_dir", |
| 145 | OMAP_PIN_INPUT_PULLDOWN); |
| 146 | omap_mux_init_signal("hsusb2_tll_nxt", |
| 147 | OMAP_PIN_INPUT_PULLDOWN); |
| 148 | omap_mux_init_signal("hsusb2_tll_data0", |
| 149 | OMAP_PIN_INPUT_PULLDOWN); |
| 150 | omap_mux_init_signal("hsusb2_tll_data1", |
| 151 | OMAP_PIN_INPUT_PULLDOWN); |
| 152 | omap_mux_init_signal("hsusb2_tll_data2", |
| 153 | OMAP_PIN_INPUT_PULLDOWN); |
| 154 | omap_mux_init_signal("hsusb2_tll_data3", |
| 155 | OMAP_PIN_INPUT_PULLDOWN); |
| 156 | omap_mux_init_signal("hsusb2_tll_data4", |
| 157 | OMAP_PIN_INPUT_PULLDOWN); |
| 158 | omap_mux_init_signal("hsusb2_tll_data5", |
| 159 | OMAP_PIN_INPUT_PULLDOWN); |
| 160 | omap_mux_init_signal("hsusb2_tll_data6", |
| 161 | OMAP_PIN_INPUT_PULLDOWN); |
| 162 | omap_mux_init_signal("hsusb2_tll_data7", |
| 163 | OMAP_PIN_INPUT_PULLDOWN); |
Felipe Balbi | 58a5491 | 2009-11-22 10:11:01 -0800 | [diff] [blame] | 164 | break; |
| 165 | case EHCI_HCD_OMAP_MODE_UNKNOWN: |
| 166 | /* FALLTHROUGH */ |
| 167 | default: |
| 168 | break; |
| 169 | } |
| 170 | |
| 171 | switch (port_mode[2]) { |
| 172 | case EHCI_HCD_OMAP_MODE_PHY: |
| 173 | printk(KERN_WARNING "Port3 can't be used in PHY mode\n"); |
| 174 | break; |
| 175 | case EHCI_HCD_OMAP_MODE_TLL: |
Tony Lindgren | 4896e39 | 2009-12-11 16:16:32 -0800 | [diff] [blame] | 176 | omap_mux_init_signal("hsusb3_tll_stp", |
| 177 | OMAP_PIN_INPUT_PULLUP); |
| 178 | omap_mux_init_signal("hsusb3_tll_clk", |
| 179 | OMAP_PIN_INPUT_PULLDOWN); |
| 180 | omap_mux_init_signal("hsusb3_tll_dir", |
| 181 | OMAP_PIN_INPUT_PULLDOWN); |
| 182 | omap_mux_init_signal("hsusb3_tll_nxt", |
| 183 | OMAP_PIN_INPUT_PULLDOWN); |
| 184 | omap_mux_init_signal("hsusb3_tll_data0", |
| 185 | OMAP_PIN_INPUT_PULLDOWN); |
| 186 | omap_mux_init_signal("hsusb3_tll_data1", |
| 187 | OMAP_PIN_INPUT_PULLDOWN); |
| 188 | omap_mux_init_signal("hsusb3_tll_data2", |
| 189 | OMAP_PIN_INPUT_PULLDOWN); |
| 190 | omap_mux_init_signal("hsusb3_tll_data3", |
| 191 | OMAP_PIN_INPUT_PULLDOWN); |
| 192 | omap_mux_init_signal("hsusb3_tll_data4", |
| 193 | OMAP_PIN_INPUT_PULLDOWN); |
| 194 | omap_mux_init_signal("hsusb3_tll_data5", |
| 195 | OMAP_PIN_INPUT_PULLDOWN); |
| 196 | omap_mux_init_signal("hsusb3_tll_data6", |
| 197 | OMAP_PIN_INPUT_PULLDOWN); |
| 198 | omap_mux_init_signal("hsusb3_tll_data7", |
| 199 | OMAP_PIN_INPUT_PULLDOWN); |
Felipe Balbi | 58a5491 | 2009-11-22 10:11:01 -0800 | [diff] [blame] | 200 | break; |
| 201 | case EHCI_HCD_OMAP_MODE_UNKNOWN: |
| 202 | /* FALLTHROUGH */ |
| 203 | default: |
| 204 | break; |
| 205 | } |
| 206 | |
| 207 | return; |
| 208 | } |
| 209 | |
Anand Gadiyar | becf073 | 2010-11-21 23:23:41 +0530 | [diff] [blame] | 210 | static void setup_4430ehci_io_mux(const enum ehci_hcd_omap_mode *port_mode) |
| 211 | { |
| 212 | switch (port_mode[0]) { |
| 213 | case EHCI_HCD_OMAP_MODE_PHY: |
| 214 | omap_mux_init_signal("usbb1_ulpiphy_stp", |
| 215 | OMAP_PIN_OUTPUT); |
| 216 | omap_mux_init_signal("usbb1_ulpiphy_clk", |
| 217 | OMAP_PIN_INPUT_PULLDOWN); |
| 218 | omap_mux_init_signal("usbb1_ulpiphy_dir", |
| 219 | OMAP_PIN_INPUT_PULLDOWN); |
| 220 | omap_mux_init_signal("usbb1_ulpiphy_nxt", |
| 221 | OMAP_PIN_INPUT_PULLDOWN); |
| 222 | omap_mux_init_signal("usbb1_ulpiphy_dat0", |
| 223 | OMAP_PIN_INPUT_PULLDOWN); |
| 224 | omap_mux_init_signal("usbb1_ulpiphy_dat1", |
| 225 | OMAP_PIN_INPUT_PULLDOWN); |
| 226 | omap_mux_init_signal("usbb1_ulpiphy_dat2", |
| 227 | OMAP_PIN_INPUT_PULLDOWN); |
| 228 | omap_mux_init_signal("usbb1_ulpiphy_dat3", |
| 229 | OMAP_PIN_INPUT_PULLDOWN); |
| 230 | omap_mux_init_signal("usbb1_ulpiphy_dat4", |
| 231 | OMAP_PIN_INPUT_PULLDOWN); |
| 232 | omap_mux_init_signal("usbb1_ulpiphy_dat5", |
| 233 | OMAP_PIN_INPUT_PULLDOWN); |
| 234 | omap_mux_init_signal("usbb1_ulpiphy_dat6", |
| 235 | OMAP_PIN_INPUT_PULLDOWN); |
| 236 | omap_mux_init_signal("usbb1_ulpiphy_dat7", |
| 237 | OMAP_PIN_INPUT_PULLDOWN); |
| 238 | break; |
| 239 | case EHCI_HCD_OMAP_MODE_TLL: |
| 240 | omap_mux_init_signal("usbb1_ulpitll_stp", |
| 241 | OMAP_PIN_INPUT_PULLUP); |
| 242 | omap_mux_init_signal("usbb1_ulpitll_clk", |
| 243 | OMAP_PIN_INPUT_PULLDOWN); |
| 244 | omap_mux_init_signal("usbb1_ulpitll_dir", |
| 245 | OMAP_PIN_INPUT_PULLDOWN); |
| 246 | omap_mux_init_signal("usbb1_ulpitll_nxt", |
| 247 | OMAP_PIN_INPUT_PULLDOWN); |
| 248 | omap_mux_init_signal("usbb1_ulpitll_dat0", |
| 249 | OMAP_PIN_INPUT_PULLDOWN); |
| 250 | omap_mux_init_signal("usbb1_ulpitll_dat1", |
| 251 | OMAP_PIN_INPUT_PULLDOWN); |
| 252 | omap_mux_init_signal("usbb1_ulpitll_dat2", |
| 253 | OMAP_PIN_INPUT_PULLDOWN); |
| 254 | omap_mux_init_signal("usbb1_ulpitll_dat3", |
| 255 | OMAP_PIN_INPUT_PULLDOWN); |
| 256 | omap_mux_init_signal("usbb1_ulpitll_dat4", |
| 257 | OMAP_PIN_INPUT_PULLDOWN); |
| 258 | omap_mux_init_signal("usbb1_ulpitll_dat5", |
| 259 | OMAP_PIN_INPUT_PULLDOWN); |
| 260 | omap_mux_init_signal("usbb1_ulpitll_dat6", |
| 261 | OMAP_PIN_INPUT_PULLDOWN); |
| 262 | omap_mux_init_signal("usbb1_ulpitll_dat7", |
| 263 | OMAP_PIN_INPUT_PULLDOWN); |
| 264 | break; |
| 265 | case EHCI_HCD_OMAP_MODE_UNKNOWN: |
| 266 | default: |
| 267 | break; |
| 268 | } |
| 269 | switch (port_mode[1]) { |
| 270 | case EHCI_HCD_OMAP_MODE_PHY: |
| 271 | omap_mux_init_signal("usbb2_ulpiphy_stp", |
| 272 | OMAP_PIN_OUTPUT); |
| 273 | omap_mux_init_signal("usbb2_ulpiphy_clk", |
| 274 | OMAP_PIN_INPUT_PULLDOWN); |
| 275 | omap_mux_init_signal("usbb2_ulpiphy_dir", |
| 276 | OMAP_PIN_INPUT_PULLDOWN); |
| 277 | omap_mux_init_signal("usbb2_ulpiphy_nxt", |
| 278 | OMAP_PIN_INPUT_PULLDOWN); |
| 279 | omap_mux_init_signal("usbb2_ulpiphy_dat0", |
| 280 | OMAP_PIN_INPUT_PULLDOWN); |
| 281 | omap_mux_init_signal("usbb2_ulpiphy_dat1", |
| 282 | OMAP_PIN_INPUT_PULLDOWN); |
| 283 | omap_mux_init_signal("usbb2_ulpiphy_dat2", |
| 284 | OMAP_PIN_INPUT_PULLDOWN); |
| 285 | omap_mux_init_signal("usbb2_ulpiphy_dat3", |
| 286 | OMAP_PIN_INPUT_PULLDOWN); |
| 287 | omap_mux_init_signal("usbb2_ulpiphy_dat4", |
| 288 | OMAP_PIN_INPUT_PULLDOWN); |
| 289 | omap_mux_init_signal("usbb2_ulpiphy_dat5", |
| 290 | OMAP_PIN_INPUT_PULLDOWN); |
| 291 | omap_mux_init_signal("usbb2_ulpiphy_dat6", |
| 292 | OMAP_PIN_INPUT_PULLDOWN); |
| 293 | omap_mux_init_signal("usbb2_ulpiphy_dat7", |
| 294 | OMAP_PIN_INPUT_PULLDOWN); |
| 295 | break; |
| 296 | case EHCI_HCD_OMAP_MODE_TLL: |
| 297 | omap_mux_init_signal("usbb2_ulpitll_stp", |
| 298 | OMAP_PIN_INPUT_PULLUP); |
| 299 | omap_mux_init_signal("usbb2_ulpitll_clk", |
| 300 | OMAP_PIN_INPUT_PULLDOWN); |
| 301 | omap_mux_init_signal("usbb2_ulpitll_dir", |
| 302 | OMAP_PIN_INPUT_PULLDOWN); |
| 303 | omap_mux_init_signal("usbb2_ulpitll_nxt", |
| 304 | OMAP_PIN_INPUT_PULLDOWN); |
| 305 | omap_mux_init_signal("usbb2_ulpitll_dat0", |
| 306 | OMAP_PIN_INPUT_PULLDOWN); |
| 307 | omap_mux_init_signal("usbb2_ulpitll_dat1", |
| 308 | OMAP_PIN_INPUT_PULLDOWN); |
| 309 | omap_mux_init_signal("usbb2_ulpitll_dat2", |
| 310 | OMAP_PIN_INPUT_PULLDOWN); |
| 311 | omap_mux_init_signal("usbb2_ulpitll_dat3", |
| 312 | OMAP_PIN_INPUT_PULLDOWN); |
| 313 | omap_mux_init_signal("usbb2_ulpitll_dat4", |
| 314 | OMAP_PIN_INPUT_PULLDOWN); |
| 315 | omap_mux_init_signal("usbb2_ulpitll_dat5", |
| 316 | OMAP_PIN_INPUT_PULLDOWN); |
| 317 | omap_mux_init_signal("usbb2_ulpitll_dat6", |
| 318 | OMAP_PIN_INPUT_PULLDOWN); |
| 319 | omap_mux_init_signal("usbb2_ulpitll_dat7", |
| 320 | OMAP_PIN_INPUT_PULLDOWN); |
| 321 | break; |
| 322 | case EHCI_HCD_OMAP_MODE_UNKNOWN: |
| 323 | default: |
| 324 | break; |
| 325 | } |
| 326 | } |
| 327 | |
Felipe Balbi | 6f69a18 | 2010-03-04 09:45:53 +0200 | [diff] [blame] | 328 | void __init usb_ehci_init(const struct ehci_hcd_omap_platform_data *pdata) |
Felipe Balbi | 58a5491 | 2009-11-22 10:11:01 -0800 | [diff] [blame] | 329 | { |
| 330 | platform_device_add_data(&ehci_device, pdata, sizeof(*pdata)); |
| 331 | |
| 332 | /* Setup Pin IO MUX for EHCI */ |
Anand Gadiyar | becf073 | 2010-11-21 23:23:41 +0530 | [diff] [blame] | 333 | if (cpu_is_omap34xx()) { |
| 334 | ehci_resources[0].start = OMAP34XX_EHCI_BASE; |
| 335 | ehci_resources[0].end = OMAP34XX_EHCI_BASE + SZ_1K - 1; |
| 336 | ehci_resources[1].start = OMAP34XX_UHH_CONFIG_BASE; |
| 337 | ehci_resources[1].end = OMAP34XX_UHH_CONFIG_BASE + SZ_1K - 1; |
| 338 | ehci_resources[2].start = OMAP34XX_USBTLL_BASE; |
| 339 | ehci_resources[2].end = OMAP34XX_USBTLL_BASE + SZ_4K - 1; |
| 340 | ehci_resources[3].start = INT_34XX_EHCI_IRQ; |
Felipe Balbi | 58a5491 | 2009-11-22 10:11:01 -0800 | [diff] [blame] | 341 | setup_ehci_io_mux(pdata->port_mode); |
Anand Gadiyar | becf073 | 2010-11-21 23:23:41 +0530 | [diff] [blame] | 342 | } else if (cpu_is_omap44xx()) { |
| 343 | ehci_resources[0].start = OMAP44XX_HSUSB_EHCI_BASE; |
| 344 | ehci_resources[0].end = OMAP44XX_HSUSB_EHCI_BASE + SZ_1K - 1; |
| 345 | ehci_resources[1].start = OMAP44XX_UHH_CONFIG_BASE; |
| 346 | ehci_resources[1].end = OMAP44XX_UHH_CONFIG_BASE + SZ_2K - 1; |
| 347 | ehci_resources[2].start = OMAP44XX_USBTLL_BASE; |
| 348 | ehci_resources[2].end = OMAP44XX_USBTLL_BASE + SZ_4K - 1; |
| 349 | ehci_resources[3].start = OMAP44XX_IRQ_EHCI; |
| 350 | setup_4430ehci_io_mux(pdata->port_mode); |
| 351 | } |
Felipe Balbi | 58a5491 | 2009-11-22 10:11:01 -0800 | [diff] [blame] | 352 | |
| 353 | if (platform_device_register(&ehci_device) < 0) { |
| 354 | printk(KERN_ERR "Unable to register HS-USB (EHCI) device\n"); |
| 355 | return; |
| 356 | } |
| 357 | } |
| 358 | |
| 359 | #else |
| 360 | |
Felipe Balbi | 6f69a18 | 2010-03-04 09:45:53 +0200 | [diff] [blame] | 361 | void __init usb_ehci_init(const struct ehci_hcd_omap_platform_data *pdata) |
Felipe Balbi | 58a5491 | 2009-11-22 10:11:01 -0800 | [diff] [blame] | 362 | |
| 363 | { |
| 364 | } |
| 365 | |
| 366 | #endif /* CONFIG_USB_EHCI_HCD */ |
| 367 | |
Anand Gadiyar | 95344fc | 2010-05-10 21:56:10 +0530 | [diff] [blame] | 368 | #if defined(CONFIG_USB_OHCI_HCD) || defined(CONFIG_USB_OHCI_HCD_MODULE) |
| 369 | |
| 370 | static struct resource ohci_resources[] = { |
| 371 | { |
| 372 | .start = OMAP34XX_OHCI_BASE, |
| 373 | .end = OMAP34XX_OHCI_BASE + SZ_1K - 1, |
| 374 | .flags = IORESOURCE_MEM, |
| 375 | }, |
| 376 | { |
| 377 | .start = OMAP34XX_UHH_CONFIG_BASE, |
| 378 | .end = OMAP34XX_UHH_CONFIG_BASE + SZ_1K - 1, |
| 379 | .flags = IORESOURCE_MEM, |
| 380 | }, |
| 381 | { |
| 382 | .start = OMAP34XX_USBTLL_BASE, |
| 383 | .end = OMAP34XX_USBTLL_BASE + SZ_4K - 1, |
| 384 | .flags = IORESOURCE_MEM, |
| 385 | }, |
| 386 | { /* general IRQ */ |
| 387 | .start = INT_34XX_OHCI_IRQ, |
| 388 | .flags = IORESOURCE_IRQ, |
| 389 | } |
| 390 | }; |
| 391 | |
| 392 | static u64 ohci_dmamask = DMA_BIT_MASK(32); |
| 393 | |
| 394 | static struct platform_device ohci_device = { |
| 395 | .name = "ohci-omap3", |
| 396 | .id = 0, |
| 397 | .dev = { |
| 398 | .dma_mask = &ohci_dmamask, |
| 399 | .coherent_dma_mask = 0xffffffff, |
| 400 | }, |
| 401 | .num_resources = ARRAY_SIZE(ohci_resources), |
| 402 | .resource = ohci_resources, |
| 403 | }; |
| 404 | |
| 405 | static void setup_ohci_io_mux(const enum ohci_omap3_port_mode *port_mode) |
| 406 | { |
| 407 | switch (port_mode[0]) { |
| 408 | case OMAP_OHCI_PORT_MODE_PHY_6PIN_DATSE0: |
| 409 | case OMAP_OHCI_PORT_MODE_PHY_6PIN_DPDM: |
| 410 | case OMAP_OHCI_PORT_MODE_TLL_6PIN_DATSE0: |
| 411 | case OMAP_OHCI_PORT_MODE_TLL_6PIN_DPDM: |
| 412 | omap_mux_init_signal("mm1_rxdp", |
| 413 | OMAP_PIN_INPUT_PULLDOWN); |
| 414 | omap_mux_init_signal("mm1_rxdm", |
| 415 | OMAP_PIN_INPUT_PULLDOWN); |
| 416 | /* FALLTHROUGH */ |
| 417 | case OMAP_OHCI_PORT_MODE_PHY_4PIN_DPDM: |
| 418 | case OMAP_OHCI_PORT_MODE_TLL_4PIN_DPDM: |
| 419 | omap_mux_init_signal("mm1_rxrcv", |
| 420 | OMAP_PIN_INPUT_PULLDOWN); |
| 421 | /* FALLTHROUGH */ |
| 422 | case OMAP_OHCI_PORT_MODE_PHY_3PIN_DATSE0: |
| 423 | case OMAP_OHCI_PORT_MODE_TLL_3PIN_DATSE0: |
| 424 | omap_mux_init_signal("mm1_txen_n", OMAP_PIN_OUTPUT); |
| 425 | /* FALLTHROUGH */ |
| 426 | case OMAP_OHCI_PORT_MODE_TLL_2PIN_DATSE0: |
| 427 | case OMAP_OHCI_PORT_MODE_TLL_2PIN_DPDM: |
| 428 | omap_mux_init_signal("mm1_txse0", |
| 429 | OMAP_PIN_INPUT_PULLDOWN); |
| 430 | omap_mux_init_signal("mm1_txdat", |
| 431 | OMAP_PIN_INPUT_PULLDOWN); |
| 432 | break; |
| 433 | case OMAP_OHCI_PORT_MODE_UNUSED: |
| 434 | /* FALLTHROUGH */ |
| 435 | default: |
| 436 | break; |
| 437 | } |
| 438 | switch (port_mode[1]) { |
| 439 | case OMAP_OHCI_PORT_MODE_PHY_6PIN_DATSE0: |
| 440 | case OMAP_OHCI_PORT_MODE_PHY_6PIN_DPDM: |
| 441 | case OMAP_OHCI_PORT_MODE_TLL_6PIN_DATSE0: |
| 442 | case OMAP_OHCI_PORT_MODE_TLL_6PIN_DPDM: |
| 443 | omap_mux_init_signal("mm2_rxdp", |
| 444 | OMAP_PIN_INPUT_PULLDOWN); |
| 445 | omap_mux_init_signal("mm2_rxdm", |
| 446 | OMAP_PIN_INPUT_PULLDOWN); |
| 447 | /* FALLTHROUGH */ |
| 448 | case OMAP_OHCI_PORT_MODE_PHY_4PIN_DPDM: |
| 449 | case OMAP_OHCI_PORT_MODE_TLL_4PIN_DPDM: |
| 450 | omap_mux_init_signal("mm2_rxrcv", |
| 451 | OMAP_PIN_INPUT_PULLDOWN); |
| 452 | /* FALLTHROUGH */ |
| 453 | case OMAP_OHCI_PORT_MODE_PHY_3PIN_DATSE0: |
| 454 | case OMAP_OHCI_PORT_MODE_TLL_3PIN_DATSE0: |
| 455 | omap_mux_init_signal("mm2_txen_n", OMAP_PIN_OUTPUT); |
| 456 | /* FALLTHROUGH */ |
| 457 | case OMAP_OHCI_PORT_MODE_TLL_2PIN_DATSE0: |
| 458 | case OMAP_OHCI_PORT_MODE_TLL_2PIN_DPDM: |
| 459 | omap_mux_init_signal("mm2_txse0", |
| 460 | OMAP_PIN_INPUT_PULLDOWN); |
| 461 | omap_mux_init_signal("mm2_txdat", |
| 462 | OMAP_PIN_INPUT_PULLDOWN); |
| 463 | break; |
| 464 | case OMAP_OHCI_PORT_MODE_UNUSED: |
| 465 | /* FALLTHROUGH */ |
| 466 | default: |
| 467 | break; |
| 468 | } |
| 469 | switch (port_mode[2]) { |
| 470 | case OMAP_OHCI_PORT_MODE_PHY_6PIN_DATSE0: |
| 471 | case OMAP_OHCI_PORT_MODE_PHY_6PIN_DPDM: |
| 472 | case OMAP_OHCI_PORT_MODE_TLL_6PIN_DATSE0: |
| 473 | case OMAP_OHCI_PORT_MODE_TLL_6PIN_DPDM: |
| 474 | omap_mux_init_signal("mm3_rxdp", |
| 475 | OMAP_PIN_INPUT_PULLDOWN); |
| 476 | omap_mux_init_signal("mm3_rxdm", |
| 477 | OMAP_PIN_INPUT_PULLDOWN); |
| 478 | /* FALLTHROUGH */ |
| 479 | case OMAP_OHCI_PORT_MODE_PHY_4PIN_DPDM: |
| 480 | case OMAP_OHCI_PORT_MODE_TLL_4PIN_DPDM: |
| 481 | omap_mux_init_signal("mm3_rxrcv", |
| 482 | OMAP_PIN_INPUT_PULLDOWN); |
| 483 | /* FALLTHROUGH */ |
| 484 | case OMAP_OHCI_PORT_MODE_PHY_3PIN_DATSE0: |
| 485 | case OMAP_OHCI_PORT_MODE_TLL_3PIN_DATSE0: |
| 486 | omap_mux_init_signal("mm3_txen_n", OMAP_PIN_OUTPUT); |
| 487 | /* FALLTHROUGH */ |
| 488 | case OMAP_OHCI_PORT_MODE_TLL_2PIN_DATSE0: |
| 489 | case OMAP_OHCI_PORT_MODE_TLL_2PIN_DPDM: |
| 490 | omap_mux_init_signal("mm3_txse0", |
| 491 | OMAP_PIN_INPUT_PULLDOWN); |
| 492 | omap_mux_init_signal("mm3_txdat", |
| 493 | OMAP_PIN_INPUT_PULLDOWN); |
| 494 | break; |
| 495 | case OMAP_OHCI_PORT_MODE_UNUSED: |
| 496 | /* FALLTHROUGH */ |
| 497 | default: |
| 498 | break; |
| 499 | } |
| 500 | } |
| 501 | |
| 502 | void __init usb_ohci_init(const struct ohci_hcd_omap_platform_data *pdata) |
| 503 | { |
| 504 | platform_device_add_data(&ohci_device, pdata, sizeof(*pdata)); |
| 505 | |
| 506 | /* Setup Pin IO MUX for OHCI */ |
| 507 | if (cpu_is_omap34xx()) |
| 508 | setup_ohci_io_mux(pdata->port_mode); |
| 509 | |
| 510 | if (platform_device_register(&ohci_device) < 0) { |
| 511 | pr_err("Unable to register FS-USB (OHCI) device\n"); |
| 512 | return; |
| 513 | } |
| 514 | } |
| 515 | |
| 516 | #else |
| 517 | |
| 518 | void __init usb_ohci_init(const struct ohci_hcd_omap_platform_data *pdata) |
| 519 | { |
| 520 | } |
| 521 | |
| 522 | #endif /* CONFIG_USB_OHCI_HCD */ |