include/asm-mips/mipsmtregs.h

/*
 * MT regs definitions, follows on from mipsregs.h
 * Copyright (C) 2004 - 2005 MIPS Technologies, Inc.  All rights reserved.
 * Elizabeth Clarke et. al.
 *
 */
#ifndef _ASM_MIPSMTREGS_H
#define _ASM_MIPSMTREGS_H

#include <asm/mipsregs.h>
#include <asm/war.h>

#ifndef __ASSEMBLY__

/*
 * C macros
 */

#define read_c0_mvpcontrol()		__read_32bit_c0_register($0, 1)
#define write_c0_mvpcontrol(val)	__write_32bit_c0_register($0, 1, val)

#define read_c0_mvpconf0()		__read_32bit_c0_register($0, 2)
#define read_c0_mvpconf1()		__read_32bit_c0_register($0, 3)

#define read_c0_vpecontrol()		__read_32bit_c0_register($1, 1)
#define write_c0_vpecontrol(val)	__write_32bit_c0_register($1, 1, val)

#define read_c0_vpeconf0()		__read_32bit_c0_register($1, 2)
#define write_c0_vpeconf0(val)		__write_32bit_c0_register($1, 2, val)

#define read_c0_tcstatus()		__read_32bit_c0_register($2, 1)
#define write_c0_tcstatus(val)		__write_32bit_c0_register($2, 1, val)

#define read_c0_tcbind()		__read_32bit_c0_register($2, 2)

#define read_c0_tccontext()		__read_32bit_c0_register($2, 5)
#define write_c0_tccontext(val)		__write_32bit_c0_register($2, 5, val)

#else /* Assembly */
/*
 * Macros for use in assembly language code
 */

#define CP0_MVPCONTROL		$0,1
#define CP0_MVPCONF0		$0,2
#define CP0_MVPCONF1		$0,3
#define CP0_VPECONTROL		$1,1
#define CP0_VPECONF0		$1,2
#define CP0_VPECONF1		$1,3
#define CP0_YQMASK		$1,4
#define CP0_VPESCHEDULE	$1,5
#define CP0_VPESCHEFBK		$1,6
#define CP0_TCSTATUS		$2,1
#define CP0_TCBIND		$2,2
#define CP0_TCRESTART		$2,3
#define CP0_TCHALT		$2,4
#define CP0_TCCONTEXT		$2,5
#define CP0_TCSCHEDULE		$2,6
#define CP0_TCSCHEFBK		$2,7
#define CP0_SRSCONF0		$6,1
#define CP0_SRSCONF1		$6,2
#define CP0_SRSCONF2		$6,3
#define CP0_SRSCONF3		$6,4
#define CP0_SRSCONF4		$6,5

#endif

/* MVPControl fields */
#define MVPCONTROL_EVP		(_ULCAST_(1))

#define MVPCONTROL_VPC_SHIFT	1
#define MVPCONTROL_VPC		(_ULCAST_(1) << MVPCONTROL_VPC_SHIFT)

#define MVPCONTROL_STLB_SHIFT	2
#define MVPCONTROL_STLB		(_ULCAST_(1) << MVPCONTROL_STLB_SHIFT)


/* MVPConf0 fields */
#define MVPCONF0_PTC_SHIFT	0
#define MVPCONF0_PTC		( _ULCAST_(0xff))
#define MVPCONF0_PVPE_SHIFT	10
#define MVPCONF0_PVPE		( _ULCAST_(0xf) << MVPCONF0_PVPE_SHIFT)
#define MVPCONF0_TCA_SHIFT	15
#define MVPCONF0_TCA		( _ULCAST_(1) << MVPCONF0_TCA_SHIFT)
#define MVPCONF0_PTLBE_SHIFT	16
#define MVPCONF0_PTLBE		(_ULCAST_(0x3ff) << MVPCONF0_PTLBE_SHIFT)
#define MVPCONF0_TLBS_SHIFT	29
#define MVPCONF0_TLBS		(_ULCAST_(1) << MVPCONF0_TLBS_SHIFT)
#define MVPCONF0_M_SHIFT	31
#define MVPCONF0_M		(_ULCAST_(0x1) << MVPCONF0_M_SHIFT)


/* config3 fields */
#define CONFIG3_MT_SHIFT	2
#define CONFIG3_MT		(_ULCAST_(1) << CONFIG3_MT_SHIFT)


/* VPEControl fields (per VPE) */
#define VPECONTROL_TARGTC	(_ULCAST_(0xff))

#define VPECONTROL_TE_SHIFT	15
#define VPECONTROL_TE		(_ULCAST_(1) << VPECONTROL_TE_SHIFT)
#define VPECONTROL_EXCPT_SHIFT	16
#define VPECONTROL_EXCPT	(_ULCAST_(0x7) << VPECONTROL_EXCPT_SHIFT)

/* Thread Exception Codes for EXCPT field */
#define THREX_TU		0
#define THREX_TO		1
#define THREX_IYQ		2
#define THREX_GSX		3
#define THREX_YSCH		4
#define THREX_GSSCH		5

#define VPECONTROL_GSI_SHIFT	20
#define VPECONTROL_GSI		(_ULCAST_(1) << VPECONTROL_GSI_SHIFT)
#define VPECONTROL_YSI_SHIFT	21
#define VPECONTROL_YSI		(_ULCAST_(1) << VPECONTROL_YSI_SHIFT)

/* VPEConf0 fields (per VPE) */
#define VPECONF0_VPA_SHIFT	0
#define VPECONF0_VPA		(_ULCAST_(1) << VPECONF0_VPA_SHIFT)
#define VPECONF0_MVP_SHIFT	1
#define VPECONF0_MVP		(_ULCAST_(1) << VPECONF0_MVP_SHIFT)
#define VPECONF0_XTC_SHIFT	21
#define VPECONF0_XTC		(_ULCAST_(0xff) << VPECONF0_XTC_SHIFT)

/* TCStatus fields (per TC) */
#define TCSTATUS_TASID		(_ULCAST_(0xff))
#define TCSTATUS_IXMT_SHIFT	10
#define TCSTATUS_IXMT		(_ULCAST_(1) << TCSTATUS_IXMT_SHIFT)
#define TCSTATUS_TKSU_SHIFT	11
#define TCSTATUS_TKSU		(_ULCAST_(3) << TCSTATUS_TKSU_SHIFT)
#define TCSTATUS_A_SHIFT	13
#define TCSTATUS_A		(_ULCAST_(1) << TCSTATUS_A_SHIFT)
#define TCSTATUS_DA_SHIFT	15
#define TCSTATUS_DA		(_ULCAST_(1) << TCSTATUS_DA_SHIFT)
#define TCSTATUS_DT_SHIFT	20
#define TCSTATUS_DT		(_ULCAST_(1) << TCSTATUS_DT_SHIFT)
#define TCSTATUS_TDS_SHIFT	21
#define TCSTATUS_TDS		(_ULCAST_(1) << TCSTATUS_TDS_SHIFT)
#define TCSTATUS_TSST_SHIFT	22
#define TCSTATUS_TSST		(_ULCAST_(1) << TCSTATUS_TSST_SHIFT)
#define TCSTATUS_RNST_SHIFT	23
#define TCSTATUS_RNST		(_ULCAST_(3) << TCSTATUS_RNST_SHIFT)
/* Codes for RNST */
#define TC_RUNNING		0
#define TC_WAITING		1
#define TC_YIELDING		2
#define TC_GATED		3

#define TCSTATUS_TMX_SHIFT	27
#define TCSTATUS_TMX		(_ULCAST_(1) << TCSTATUS_TMX_SHIFT)
/* TCStatus TCU bits can use same definitions/offsets as CU bits in Status */

/* TCBind */
#define TCBIND_CURVPE_SHIFT	0
#define TCBIND_CURVPE		(_ULCAST_(0xf))

#define TCBIND_CURTC_SHIFT	21

#define TCBIND_CURTC		(_ULCAST_(0xff) << TCBIND_CURTC_SHIFT)

/* TCHalt */
#define TCHALT_H		(_ULCAST_(1))

#ifndef __ASSEMBLY__

extern void mips_mt_regdump(void);

static inline unsigned int dvpe(void)
{
	int res = 0;

	__asm__ __volatile__(
	"	.set	push						\n"
	"	.set	noreorder					\n"
	"	.set	noat						\n"
	"	.set	mips32r2					\n"
	"	.word	0x41610001		# dvpe $1		\n"
	"	move	%0, $1						\n"
	"	ehb							\n"
	"	.set	pop						\n"
	: "=r" (res));

	instruction_hazard();

	return res;
}

static inline void __raw_evpe(void)
{
	__asm__ __volatile__(
	"	.set	push						\n"
	"	.set	noreorder					\n"
	"	.set	noat						\n"
	"	.set	mips32r2					\n"
	"	.word	0x41600021		# evpe			\n"
	"	ehb							\n"
	"	.set	pop						\n");
}

/* Enable multiMT if previous suggested it should be.
   EMT_ENABLE to force */

#define EVPE_ENABLE MVPCONTROL_EVP

static inline void evpe(int previous)
{
	if ((previous & MVPCONTROL_EVP))
		__raw_evpe();
}

static inline unsigned int dmt(void)
{
	int res;

	__asm__ __volatile__(
	"	.set	push						\n"
	"	.set	mips32r2					\n"
	"	.set	noat						\n"
	"	.word	0x41610BC1			# dmt $1	\n"
	"	ehb							\n"
	"	move	%0, $1						\n"
	"	.set	pop						\n"
	: "=r" (res));

	instruction_hazard();

	return res;
}

static inline void __raw_emt(void)
{
	__asm__ __volatile__(
	"	.set	noreorder					\n"
	"	.set	mips32r2					\n"
	"	emt							\n"
	"	ehb							\n"
	"	.set	mips0						\n"
	"	.set	reorder");
}

/* enable multiVPE if previous suggested it should be.
   EVPE_ENABLE to force */

#define EMT_ENABLE VPECONTROL_TE

static inline void emt(int previous)
{
	if ((previous & EMT_ENABLE))
		__raw_emt();
}

static inline void ehb(void)
{
	__asm__ __volatile__(
	"	.set	mips32r2				\n"
	"	ehb						\n"
	"	.set	mips0					\n");
}

#define mftc0(rt,sel)							\
({									\
	 unsigned long  __res;						\
									\
	__asm__ __volatile__(						\
	"	.set	push					\n"	\
	"	.set	mips32r2				\n"	\
	"	.set	noat					\n"	\
	"	# mftc0	$1, $" #rt ", " #sel "			\n"	\
	"	.word	0x41000800 | (" #rt " << 16) | " #sel "	\n"	\
	"	move	%0, $1					\n"	\
	"	.set	pop					\n"	\
	: "=r" (__res));						\
									\
	__res;								\
})

#define mftgpr(rt)							\
({									\
	unsigned long __res;						\
									\
	__asm__ __volatile__(						\
	"	.set	push					\n"	\
	"	.set	mips32r2				\n"	\
	"	mftgpr	%0," #rt "				\n"	\
	"	.set	pop					\n"	\
	: "=r" (__res));						\
									\
	__res;								\
})

#define mftr(rt,u,sel)							\
({									\
	unsigned long __res;						\
									\
	__asm__ __volatile__(						\
	".set noat\n\t"							\
	"mftr\t%0, " #rt ", " #u ", " #sel "\n\t"			\
	".set at\n\t"							\
	: "=r" (__res));						\
									\
	__res;								\
})

#define mttgpr(rd,v)							\
do {									\
	__asm__ __volatile__(						\
	"	.set	push					\n"	\
	"	.set	mips32r2				\n"	\
	"	.set	noat					\n"	\
	"	move	$1, %0					\n"	\
	"	# mttgpr $1, " #rd "				\n"	\
	"	.word	0x41810020 | (" #rd " << 11)		\n"	\
	"	.set	pop					\n"	\
	: : "r" (v));							\
} while (0)

#define mttc0(rd,sel,v)							\
({									\
	__asm__ __volatile__(						\
	"	.set	push					\n"	\
	"	.set	mips32r2				\n"	\
	"	.set	noat					\n"	\
	"	move	$1, %0					\n"	\
	"	# mttc0 %0," #rd ", " #sel "			\n"	\
	"	.word	0x41810000 | (" #rd " << 11) | " #sel "	\n"	\
	"	.set	pop					\n"	\
	:								\
	: "r" (v));							\
})


#define mttr(rd,u,sel,v)						\
({									\
	__asm__ __volatile__(						\
	"mttr	%0," #rd ", " #u ", " #sel				\
	: : "r" (v));							\
})


#define settc(tc)							\
do {									\
	write_c0_vpecontrol((read_c0_vpecontrol()&~VPECONTROL_TARGTC) | (tc)); \
	ehb();								\
} while (0)


/* you *must* set the target tc (settc) before trying to use these */
#define read_vpe_c0_vpecontrol()	mftc0(1, 1)
#define write_vpe_c0_vpecontrol(val)	mttc0(1, 1, val)
#define read_vpe_c0_vpeconf0()		mftc0(1, 2)
#define write_vpe_c0_vpeconf0(val)	mttc0(1, 2, val)
#define read_vpe_c0_status()		mftc0(12, 0)
#define write_vpe_c0_status(val)	mttc0(12, 0, val)
#define read_vpe_c0_cause()		mftc0(13, 0)
#define write_vpe_c0_cause(val)		mttc0(13, 0, val)
#define read_vpe_c0_config()		mftc0(16, 0)
#define write_vpe_c0_config(val)	mttc0(16, 0, val)
#define read_vpe_c0_config1()		mftc0(16, 1)
#define write_vpe_c0_config1(val)	mttc0(16, 1, val)
#define read_vpe_c0_config7()		mftc0(16, 7)
#define write_vpe_c0_config7(val)	mttc0(16, 7, val)
#define read_vpe_c0_ebase()		mftc0(15,1)
#define write_vpe_c0_ebase(val)		mttc0(15, 1, val)
#define write_vpe_c0_compare(val)	mttc0(11, 0, val)


/* TC */
#define read_tc_c0_tcstatus()		mftc0(2, 1)
#define write_tc_c0_tcstatus(val)	mttc0(2,1,val)
#define read_tc_c0_tcbind()		mftc0(2, 2)
#define write_tc_c0_tcbind(val)		mttc0(2,2,val)
#define read_tc_c0_tcrestart()		mftc0(2, 3)
#define write_tc_c0_tcrestart(val)	mttc0(2,3,val)
#define read_tc_c0_tchalt()		mftc0(2, 4)
#define write_tc_c0_tchalt(val)		mttc0(2,4,val)
#define read_tc_c0_tccontext()		mftc0(2, 5)
#define write_tc_c0_tccontext(val)	mttc0(2,5,val)

/* GPR */
#define read_tc_gpr_sp()		mftgpr(29)
#define write_tc_gpr_sp(val)		mttgpr(29, val)
#define read_tc_gpr_gp()		mftgpr(28)
#define write_tc_gpr_gp(val)		mttgpr(28, val)

__BUILD_SET_C0(mvpcontrol)

#endif /* Not __ASSEMBLY__ */

#endif