Tushar Dave | d0a1262 | 2015-06-10 13:34:24 -0700 | [diff] [blame] | 1 | /* intel_pch_thermal.c - Intel PCH Thermal driver |
| 2 | * |
| 3 | * Copyright (c) 2015, Intel Corporation. |
| 4 | * |
| 5 | * Authors: |
| 6 | * Tushar Dave <tushar.n.dave@intel.com> |
| 7 | * |
| 8 | * This program is free software; you can redistribute it and/or modify it |
| 9 | * under the terms and conditions of the GNU General Public License, |
| 10 | * version 2, as published by the Free Software Foundation. |
| 11 | * |
| 12 | * This program is distributed in the hope it will be useful, but WITHOUT |
| 13 | * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or |
| 14 | * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for |
| 15 | * more details. |
| 16 | * |
| 17 | */ |
| 18 | |
| 19 | #include <linux/module.h> |
| 20 | #include <linux/types.h> |
| 21 | #include <linux/init.h> |
| 22 | #include <linux/pci.h> |
| 23 | #include <linux/thermal.h> |
| 24 | |
| 25 | /* Intel PCH thermal Device IDs */ |
| 26 | #define PCH_THERMAL_DID_WPT 0x9CA4 /* Wildcat Point */ |
| 27 | |
| 28 | /* Wildcat Point-LP PCH Thermal registers */ |
| 29 | #define WPT_TEMP 0x0000 /* Temperature */ |
| 30 | #define WPT_TSC 0x04 /* Thermal Sensor Control */ |
| 31 | #define WPT_TSS 0x06 /* Thermal Sensor Status */ |
| 32 | #define WPT_TSEL 0x08 /* Thermal Sensor Enable and Lock */ |
| 33 | #define WPT_TSREL 0x0A /* Thermal Sensor Report Enable and Lock */ |
| 34 | #define WPT_TSMIC 0x0C /* Thermal Sensor SMI Control */ |
| 35 | #define WPT_CTT 0x0010 /* Catastrophic Trip Point */ |
| 36 | #define WPT_TAHV 0x0014 /* Thermal Alert High Value */ |
| 37 | #define WPT_TALV 0x0018 /* Thermal Alert Low Value */ |
| 38 | #define WPT_TL 0x00000040 /* Throttle Value */ |
| 39 | #define WPT_PHL 0x0060 /* PCH Hot Level */ |
| 40 | #define WPT_PHLC 0x62 /* PHL Control */ |
| 41 | #define WPT_TAS 0x80 /* Thermal Alert Status */ |
| 42 | #define WPT_TSPIEN 0x82 /* PCI Interrupt Event Enables */ |
| 43 | #define WPT_TSGPEN 0x84 /* General Purpose Event Enables */ |
| 44 | |
| 45 | /* Wildcat Point-LP PCH Thermal Register bit definitions */ |
| 46 | #define WPT_TEMP_TSR 0x00ff /* Temp TS Reading */ |
| 47 | #define WPT_TSC_CPDE 0x01 /* Catastrophic Power-Down Enable */ |
| 48 | #define WPT_TSS_TSDSS 0x10 /* Thermal Sensor Dynamic Shutdown Status */ |
| 49 | #define WPT_TSS_GPES 0x08 /* GPE status */ |
| 50 | #define WPT_TSEL_ETS 0x01 /* Enable TS */ |
| 51 | #define WPT_TSEL_PLDB 0x80 /* TSEL Policy Lock-Down Bit */ |
| 52 | #define WPT_TL_TOL 0x000001FF /* T0 Level */ |
| 53 | #define WPT_TL_T1L 0x1ff00000 /* T1 Level */ |
| 54 | #define WPT_TL_TTEN 0x20000000 /* TT Enable */ |
| 55 | |
| 56 | static char driver_name[] = "Intel PCH thermal driver"; |
| 57 | |
| 58 | struct pch_thermal_device { |
| 59 | void __iomem *hw_base; |
| 60 | const struct pch_dev_ops *ops; |
| 61 | struct pci_dev *pdev; |
| 62 | struct thermal_zone_device *tzd; |
| 63 | int crt_trip_id; |
| 64 | unsigned long crt_temp; |
| 65 | int hot_trip_id; |
| 66 | unsigned long hot_temp; |
| 67 | }; |
| 68 | |
| 69 | static int pch_wpt_init(struct pch_thermal_device *ptd, int *nr_trips) |
| 70 | { |
| 71 | u8 tsel; |
| 72 | u16 trip_temp; |
| 73 | |
| 74 | *nr_trips = 0; |
| 75 | |
| 76 | /* Check if BIOS has already enabled thermal sensor */ |
| 77 | if (WPT_TSS_TSDSS & readb(ptd->hw_base + WPT_TSS)) |
| 78 | goto read_trips; |
| 79 | |
| 80 | tsel = readb(ptd->hw_base + WPT_TSEL); |
| 81 | /* |
| 82 | * When TSEL's Policy Lock-Down bit is 1, TSEL become RO. |
| 83 | * If so, thermal sensor cannot enable. Bail out. |
| 84 | */ |
| 85 | if (tsel & WPT_TSEL_PLDB) { |
| 86 | dev_err(&ptd->pdev->dev, "Sensor can't be enabled\n"); |
| 87 | return -ENODEV; |
| 88 | } |
| 89 | |
| 90 | writeb(tsel|WPT_TSEL_ETS, ptd->hw_base + WPT_TSEL); |
| 91 | if (!(WPT_TSS_TSDSS & readb(ptd->hw_base + WPT_TSS))) { |
| 92 | dev_err(&ptd->pdev->dev, "Sensor can't be enabled\n"); |
| 93 | return -ENODEV; |
| 94 | } |
| 95 | |
| 96 | read_trips: |
| 97 | ptd->crt_trip_id = -1; |
| 98 | trip_temp = readw(ptd->hw_base + WPT_CTT); |
| 99 | trip_temp &= 0x1FF; |
| 100 | if (trip_temp) { |
| 101 | /* Resolution of 1/2 degree C and an offset of -50C */ |
| 102 | ptd->crt_temp = trip_temp * 1000 / 2 - 50000; |
| 103 | ptd->crt_trip_id = 0; |
| 104 | ++(*nr_trips); |
| 105 | } |
| 106 | |
| 107 | ptd->hot_trip_id = -1; |
| 108 | trip_temp = readw(ptd->hw_base + WPT_PHL); |
| 109 | trip_temp &= 0x1FF; |
| 110 | if (trip_temp) { |
| 111 | /* Resolution of 1/2 degree C and an offset of -50C */ |
| 112 | ptd->hot_temp = trip_temp * 1000 / 2 - 50000; |
| 113 | ptd->hot_trip_id = *nr_trips; |
| 114 | ++(*nr_trips); |
| 115 | } |
| 116 | |
| 117 | return 0; |
| 118 | } |
| 119 | |
Linus Torvalds | dfb22fc | 2015-09-11 20:06:59 -0700 | [diff] [blame] | 120 | static int pch_wpt_get_temp(struct pch_thermal_device *ptd, int *temp) |
Tushar Dave | d0a1262 | 2015-06-10 13:34:24 -0700 | [diff] [blame] | 121 | { |
| 122 | u8 wpt_temp; |
| 123 | |
| 124 | wpt_temp = WPT_TEMP_TSR & readl(ptd->hw_base + WPT_TEMP); |
| 125 | |
| 126 | /* Resolution of 1/2 degree C and an offset of -50C */ |
| 127 | *temp = (wpt_temp * 1000 / 2 - 50000); |
| 128 | |
| 129 | return 0; |
| 130 | } |
| 131 | |
| 132 | struct pch_dev_ops { |
| 133 | int (*hw_init)(struct pch_thermal_device *ptd, int *nr_trips); |
Linus Torvalds | dfb22fc | 2015-09-11 20:06:59 -0700 | [diff] [blame] | 134 | int (*get_temp)(struct pch_thermal_device *ptd, int *temp); |
Tushar Dave | d0a1262 | 2015-06-10 13:34:24 -0700 | [diff] [blame] | 135 | }; |
| 136 | |
| 137 | |
| 138 | /* dev ops for Wildcat Point */ |
| 139 | static struct pch_dev_ops pch_dev_ops_wpt = { |
| 140 | .hw_init = pch_wpt_init, |
| 141 | .get_temp = pch_wpt_get_temp, |
| 142 | }; |
| 143 | |
Linus Torvalds | dfb22fc | 2015-09-11 20:06:59 -0700 | [diff] [blame] | 144 | static int pch_thermal_get_temp(struct thermal_zone_device *tzd, int *temp) |
Tushar Dave | d0a1262 | 2015-06-10 13:34:24 -0700 | [diff] [blame] | 145 | { |
| 146 | struct pch_thermal_device *ptd = tzd->devdata; |
| 147 | |
| 148 | return ptd->ops->get_temp(ptd, temp); |
| 149 | } |
| 150 | |
| 151 | static int pch_get_trip_type(struct thermal_zone_device *tzd, int trip, |
| 152 | enum thermal_trip_type *type) |
| 153 | { |
| 154 | struct pch_thermal_device *ptd = tzd->devdata; |
| 155 | |
| 156 | if (ptd->crt_trip_id == trip) |
| 157 | *type = THERMAL_TRIP_CRITICAL; |
| 158 | else if (ptd->hot_trip_id == trip) |
| 159 | *type = THERMAL_TRIP_HOT; |
| 160 | else |
| 161 | return -EINVAL; |
| 162 | |
| 163 | return 0; |
| 164 | } |
| 165 | |
Linus Torvalds | dfb22fc | 2015-09-11 20:06:59 -0700 | [diff] [blame] | 166 | static int pch_get_trip_temp(struct thermal_zone_device *tzd, int trip, int *temp) |
Tushar Dave | d0a1262 | 2015-06-10 13:34:24 -0700 | [diff] [blame] | 167 | { |
| 168 | struct pch_thermal_device *ptd = tzd->devdata; |
| 169 | |
| 170 | if (ptd->crt_trip_id == trip) |
| 171 | *temp = ptd->crt_temp; |
| 172 | else if (ptd->hot_trip_id == trip) |
| 173 | *temp = ptd->hot_temp; |
| 174 | else |
| 175 | return -EINVAL; |
| 176 | |
| 177 | return 0; |
| 178 | } |
| 179 | |
| 180 | static struct thermal_zone_device_ops tzd_ops = { |
| 181 | .get_temp = pch_thermal_get_temp, |
| 182 | .get_trip_type = pch_get_trip_type, |
| 183 | .get_trip_temp = pch_get_trip_temp, |
| 184 | }; |
| 185 | |
| 186 | |
| 187 | static int intel_pch_thermal_probe(struct pci_dev *pdev, |
| 188 | const struct pci_device_id *id) |
| 189 | { |
| 190 | struct pch_thermal_device *ptd; |
| 191 | int err; |
| 192 | int nr_trips; |
| 193 | char *dev_name; |
| 194 | |
| 195 | ptd = devm_kzalloc(&pdev->dev, sizeof(*ptd), GFP_KERNEL); |
| 196 | if (!ptd) |
| 197 | return -ENOMEM; |
| 198 | |
| 199 | switch (pdev->device) { |
| 200 | case PCH_THERMAL_DID_WPT: |
| 201 | ptd->ops = &pch_dev_ops_wpt; |
| 202 | dev_name = "pch_wildcat_point"; |
| 203 | break; |
| 204 | default: |
| 205 | dev_err(&pdev->dev, "unknown pch thermal device\n"); |
| 206 | return -ENODEV; |
| 207 | } |
| 208 | |
| 209 | pci_set_drvdata(pdev, ptd); |
| 210 | ptd->pdev = pdev; |
| 211 | |
| 212 | err = pci_enable_device(pdev); |
| 213 | if (err) { |
| 214 | dev_err(&pdev->dev, "failed to enable pci device\n"); |
| 215 | return err; |
| 216 | } |
| 217 | |
| 218 | err = pci_request_regions(pdev, driver_name); |
| 219 | if (err) { |
| 220 | dev_err(&pdev->dev, "failed to request pci region\n"); |
| 221 | goto error_disable; |
| 222 | } |
| 223 | |
| 224 | ptd->hw_base = pci_ioremap_bar(pdev, 0); |
| 225 | if (!ptd->hw_base) { |
| 226 | err = -ENOMEM; |
| 227 | dev_err(&pdev->dev, "failed to map mem base\n"); |
| 228 | goto error_release; |
| 229 | } |
| 230 | |
| 231 | err = ptd->ops->hw_init(ptd, &nr_trips); |
| 232 | if (err) |
| 233 | goto error_cleanup; |
| 234 | |
| 235 | ptd->tzd = thermal_zone_device_register(dev_name, nr_trips, 0, ptd, |
| 236 | &tzd_ops, NULL, 0, 0); |
| 237 | if (IS_ERR(ptd->tzd)) { |
| 238 | dev_err(&pdev->dev, "Failed to register thermal zone %s\n", |
| 239 | dev_name); |
| 240 | err = PTR_ERR(ptd->tzd); |
| 241 | goto error_cleanup; |
| 242 | } |
| 243 | |
| 244 | return 0; |
| 245 | |
| 246 | error_cleanup: |
| 247 | iounmap(ptd->hw_base); |
| 248 | error_release: |
| 249 | pci_release_regions(pdev); |
| 250 | error_disable: |
| 251 | pci_disable_device(pdev); |
| 252 | dev_err(&pdev->dev, "pci device failed to probe\n"); |
| 253 | return err; |
| 254 | } |
| 255 | |
| 256 | static void intel_pch_thermal_remove(struct pci_dev *pdev) |
| 257 | { |
| 258 | struct pch_thermal_device *ptd = pci_get_drvdata(pdev); |
| 259 | |
| 260 | thermal_zone_device_unregister(ptd->tzd); |
| 261 | iounmap(ptd->hw_base); |
| 262 | pci_set_drvdata(pdev, NULL); |
| 263 | pci_release_region(pdev, 0); |
| 264 | pci_disable_device(pdev); |
| 265 | } |
| 266 | |
| 267 | static struct pci_device_id intel_pch_thermal_id[] = { |
| 268 | { PCI_DEVICE(PCI_VENDOR_ID_INTEL, PCH_THERMAL_DID_WPT) }, |
| 269 | { 0, }, |
| 270 | }; |
| 271 | MODULE_DEVICE_TABLE(pci, intel_pch_thermal_id); |
| 272 | |
| 273 | static struct pci_driver intel_pch_thermal_driver = { |
| 274 | .name = "intel_pch_thermal", |
| 275 | .id_table = intel_pch_thermal_id, |
| 276 | .probe = intel_pch_thermal_probe, |
| 277 | .remove = intel_pch_thermal_remove, |
| 278 | }; |
| 279 | |
| 280 | module_pci_driver(intel_pch_thermal_driver); |
| 281 | |
| 282 | MODULE_LICENSE("GPL v2"); |
| 283 | MODULE_DESCRIPTION("Intel PCH Thermal driver"); |