Vadim Pasternak | 92b6458 | 2017-10-03 18:08:27 +0000 | [diff] [blame] | 1 | /* |
| 2 | * Hardware monitoring driver for Maxim MAX6621 |
| 3 | * |
| 4 | * Copyright (c) 2017 Mellanox Technologies. All rights reserved. |
| 5 | * Copyright (c) 2017 Vadim Pasternak <vadimp@mellanox.com> |
| 6 | * |
| 7 | * This program is free software; you can redistribute it and/or modify |
| 8 | * it under the terms of the GNU General Public License as published by |
| 9 | * the Free Software Foundation; either version 2 of the License, or |
| 10 | * (at your option) any later version. |
| 11 | * |
| 12 | * This program is distributed in the hope that it will be useful, |
| 13 | * but WITHOUT ANY WARRANTY; without even the implied warranty of |
| 14 | * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the |
| 15 | * GNU General Public License for more details. |
| 16 | */ |
| 17 | |
| 18 | #include <linux/bitops.h> |
| 19 | #include <linux/hwmon.h> |
| 20 | #include <linux/hwmon-sysfs.h> |
| 21 | #include <linux/i2c.h> |
| 22 | #include <linux/init.h> |
| 23 | #include <linux/module.h> |
| 24 | #include <linux/of_device.h> |
| 25 | #include <linux/regmap.h> |
| 26 | |
| 27 | #define MAX6621_DRV_NAME "max6621" |
| 28 | #define MAX6621_TEMP_INPUT_REG_NUM 9 |
| 29 | #define MAX6621_TEMP_INPUT_MIN -127000 |
| 30 | #define MAX6621_TEMP_INPUT_MAX 128000 |
| 31 | #define MAX6621_TEMP_ALERT_CHAN_SHIFT 1 |
| 32 | |
| 33 | #define MAX6621_TEMP_S0D0_REG 0x00 |
| 34 | #define MAX6621_TEMP_S0D1_REG 0x01 |
| 35 | #define MAX6621_TEMP_S1D0_REG 0x02 |
| 36 | #define MAX6621_TEMP_S1D1_REG 0x03 |
| 37 | #define MAX6621_TEMP_S2D0_REG 0x04 |
| 38 | #define MAX6621_TEMP_S2D1_REG 0x05 |
| 39 | #define MAX6621_TEMP_S3D0_REG 0x06 |
| 40 | #define MAX6621_TEMP_S3D1_REG 0x07 |
| 41 | #define MAX6621_TEMP_MAX_REG 0x08 |
| 42 | #define MAX6621_TEMP_MAX_ADDR_REG 0x0a |
| 43 | #define MAX6621_TEMP_ALERT_CAUSE_REG 0x0b |
| 44 | #define MAX6621_CONFIG0_REG 0x0c |
| 45 | #define MAX6621_CONFIG1_REG 0x0d |
| 46 | #define MAX6621_CONFIG2_REG 0x0e |
| 47 | #define MAX6621_CONFIG3_REG 0x0f |
| 48 | #define MAX6621_TEMP_S0_ALERT_REG 0x10 |
| 49 | #define MAX6621_TEMP_S1_ALERT_REG 0x11 |
| 50 | #define MAX6621_TEMP_S2_ALERT_REG 0x12 |
| 51 | #define MAX6621_TEMP_S3_ALERT_REG 0x13 |
| 52 | #define MAX6621_CLEAR_ALERT_REG 0x15 |
| 53 | #define MAX6621_REG_MAX (MAX6621_CLEAR_ALERT_REG + 1) |
| 54 | #define MAX6621_REG_TEMP_SHIFT 0x06 |
| 55 | |
| 56 | #define MAX6621_ENABLE_TEMP_ALERTS_BIT 4 |
| 57 | #define MAX6621_ENABLE_I2C_CRC_BIT 5 |
| 58 | #define MAX6621_ENABLE_ALTERNATE_DATA 6 |
| 59 | #define MAX6621_ENABLE_LOCKUP_TO 7 |
| 60 | #define MAX6621_ENABLE_S0D0_BIT 8 |
| 61 | #define MAX6621_ENABLE_S3D1_BIT 15 |
| 62 | #define MAX6621_ENABLE_TEMP_ALL GENMASK(MAX6621_ENABLE_S3D1_BIT, \ |
| 63 | MAX6621_ENABLE_S0D0_BIT) |
| 64 | #define MAX6621_POLL_DELAY_MASK 0x5 |
| 65 | #define MAX6621_CONFIG0_INIT (MAX6621_ENABLE_TEMP_ALL | \ |
| 66 | BIT(MAX6621_ENABLE_LOCKUP_TO) | \ |
| 67 | BIT(MAX6621_ENABLE_I2C_CRC_BIT) | \ |
| 68 | MAX6621_POLL_DELAY_MASK) |
| 69 | #define MAX6621_PECI_BIT_TIME 0x2 |
| 70 | #define MAX6621_PECI_RETRY_NUM 0x3 |
| 71 | #define MAX6621_CONFIG1_INIT ((MAX6621_PECI_BIT_TIME << 8) | \ |
| 72 | MAX6621_PECI_RETRY_NUM) |
| 73 | |
| 74 | /* Error codes */ |
| 75 | #define MAX6621_TRAN_FAILED 0x8100 /* |
| 76 | * PECI transaction failed for more |
| 77 | * than the configured number of |
| 78 | * consecutive retries. |
| 79 | */ |
| 80 | #define MAX6621_POOL_DIS 0x8101 /* |
| 81 | * Polling disabled for requested |
| 82 | * socket/domain. |
| 83 | */ |
| 84 | #define MAX6621_POOL_UNCOMPLETE 0x8102 /* |
| 85 | * First poll not yet completed for |
| 86 | * requested socket/domain (on |
| 87 | * startup). |
| 88 | */ |
| 89 | #define MAX6621_SD_DIS 0x8103 /* |
| 90 | * Read maximum temperature requested, |
| 91 | * but no sockets/domains enabled or |
| 92 | * all enabled sockets/domains have |
| 93 | * errors; or read maximum temperature |
| 94 | * address requested, but read maximum |
| 95 | * temperature was not called. |
| 96 | */ |
| 97 | #define MAX6621_ALERT_DIS 0x8104 /* |
| 98 | * Get alert socket/domain requested, |
| 99 | * but no alert active. |
| 100 | */ |
| 101 | #define MAX6621_PECI_ERR_MIN 0x8000 /* Intel spec PECI error min value. */ |
| 102 | #define MAX6621_PECI_ERR_MAX 0x80ff /* Intel spec PECI error max value. */ |
| 103 | |
| 104 | static const u32 max6621_temp_regs[] = { |
| 105 | MAX6621_TEMP_MAX_REG, MAX6621_TEMP_S0D0_REG, MAX6621_TEMP_S1D0_REG, |
| 106 | MAX6621_TEMP_S2D0_REG, MAX6621_TEMP_S3D0_REG, MAX6621_TEMP_S0D1_REG, |
| 107 | MAX6621_TEMP_S1D1_REG, MAX6621_TEMP_S2D1_REG, MAX6621_TEMP_S3D1_REG, |
| 108 | }; |
| 109 | |
| 110 | static const char *const max6621_temp_labels[] = { |
| 111 | "maximum", |
| 112 | "socket0_0", |
| 113 | "socket1_0", |
| 114 | "socket2_0", |
| 115 | "socket3_0", |
| 116 | "socket0_1", |
| 117 | "socket1_1", |
| 118 | "socket2_1", |
| 119 | "socket3_1", |
| 120 | }; |
| 121 | |
| 122 | static const int max6621_temp_alert_chan2reg[] = { |
| 123 | MAX6621_TEMP_S0_ALERT_REG, |
| 124 | MAX6621_TEMP_S1_ALERT_REG, |
| 125 | MAX6621_TEMP_S2_ALERT_REG, |
| 126 | MAX6621_TEMP_S3_ALERT_REG, |
| 127 | }; |
| 128 | |
| 129 | /** |
| 130 | * struct max6621_data - private data: |
| 131 | * |
| 132 | * @client: I2C client; |
| 133 | * @regmap: register map handle; |
| 134 | * @input_chan2reg: mapping from channel to register; |
| 135 | */ |
| 136 | struct max6621_data { |
| 137 | struct i2c_client *client; |
| 138 | struct regmap *regmap; |
| 139 | int input_chan2reg[MAX6621_TEMP_INPUT_REG_NUM + 1]; |
| 140 | }; |
| 141 | |
| 142 | static long max6621_temp_mc2reg(long val) |
| 143 | { |
| 144 | return (val / 1000L) << MAX6621_REG_TEMP_SHIFT; |
| 145 | } |
| 146 | |
| 147 | static umode_t |
| 148 | max6621_is_visible(const void *data, enum hwmon_sensor_types type, u32 attr, |
| 149 | int channel) |
| 150 | { |
| 151 | /* Skip channels which are not physically conncted. */ |
| 152 | if (((struct max6621_data *)data)->input_chan2reg[channel] < 0) |
| 153 | return 0; |
| 154 | |
| 155 | switch (type) { |
| 156 | case hwmon_temp: |
| 157 | switch (attr) { |
| 158 | case hwmon_temp_input: |
| 159 | case hwmon_temp_label: |
| 160 | case hwmon_temp_crit_alarm: |
| 161 | return 0444; |
| 162 | case hwmon_temp_offset: |
| 163 | case hwmon_temp_crit: |
| 164 | return 0644; |
| 165 | default: |
| 166 | break; |
| 167 | } |
| 168 | |
| 169 | default: |
| 170 | break; |
| 171 | } |
| 172 | |
| 173 | return 0; |
| 174 | } |
| 175 | |
| 176 | static int max6621_verify_reg_data(struct device *dev, int regval) |
| 177 | { |
| 178 | if (regval >= MAX6621_PECI_ERR_MIN && |
| 179 | regval <= MAX6621_PECI_ERR_MAX) { |
| 180 | dev_dbg(dev, "PECI error code - err 0x%04x.\n", |
| 181 | regval); |
| 182 | |
| 183 | return -EIO; |
| 184 | } |
| 185 | |
| 186 | switch (regval) { |
| 187 | case MAX6621_TRAN_FAILED: |
| 188 | dev_dbg(dev, "PECI transaction failed - err 0x%04x.\n", |
| 189 | regval); |
| 190 | return -EIO; |
| 191 | case MAX6621_POOL_DIS: |
| 192 | dev_dbg(dev, "Polling disabled - err 0x%04x.\n", regval); |
| 193 | return -EOPNOTSUPP; |
| 194 | case MAX6621_POOL_UNCOMPLETE: |
| 195 | dev_dbg(dev, "First poll not completed on startup - err 0x%04x.\n", |
| 196 | regval); |
| 197 | return -EIO; |
| 198 | case MAX6621_SD_DIS: |
| 199 | dev_dbg(dev, "Resource is disabled - err 0x%04x.\n", regval); |
| 200 | return -EOPNOTSUPP; |
| 201 | case MAX6621_ALERT_DIS: |
| 202 | dev_dbg(dev, "No alert active - err 0x%04x.\n", regval); |
| 203 | return -EOPNOTSUPP; |
| 204 | default: |
| 205 | return 0; |
| 206 | } |
| 207 | } |
| 208 | |
| 209 | static int |
| 210 | max6621_read(struct device *dev, enum hwmon_sensor_types type, u32 attr, |
| 211 | int channel, long *val) |
| 212 | { |
| 213 | struct max6621_data *data = dev_get_drvdata(dev); |
| 214 | u32 regval; |
| 215 | int reg; |
| 216 | s8 temp; |
| 217 | int ret; |
| 218 | |
| 219 | switch (type) { |
| 220 | case hwmon_temp: |
| 221 | switch (attr) { |
| 222 | case hwmon_temp_input: |
| 223 | reg = data->input_chan2reg[channel]; |
| 224 | ret = regmap_read(data->regmap, reg, ®val); |
| 225 | if (ret) |
| 226 | return ret; |
| 227 | |
| 228 | ret = max6621_verify_reg_data(dev, regval); |
| 229 | if (ret) |
| 230 | return ret; |
| 231 | |
| 232 | /* |
| 233 | * Bit MAX6621_REG_TEMP_SHIFT represents 1 degree step. |
| 234 | * The temperature is given in two's complement and 8 |
| 235 | * bits is used for the register conversion. |
| 236 | */ |
| 237 | temp = (regval >> MAX6621_REG_TEMP_SHIFT); |
| 238 | *val = temp * 1000L; |
| 239 | |
| 240 | break; |
| 241 | case hwmon_temp_offset: |
| 242 | ret = regmap_read(data->regmap, MAX6621_CONFIG2_REG, |
| 243 | ®val); |
| 244 | if (ret) |
| 245 | return ret; |
| 246 | |
| 247 | ret = max6621_verify_reg_data(dev, regval); |
| 248 | if (ret) |
| 249 | return ret; |
| 250 | |
| 251 | *val = (regval >> MAX6621_REG_TEMP_SHIFT) * |
| 252 | 1000L; |
| 253 | |
| 254 | break; |
| 255 | case hwmon_temp_crit: |
| 256 | channel -= MAX6621_TEMP_ALERT_CHAN_SHIFT; |
| 257 | reg = max6621_temp_alert_chan2reg[channel]; |
| 258 | ret = regmap_read(data->regmap, reg, ®val); |
| 259 | if (ret) |
| 260 | return ret; |
| 261 | |
| 262 | ret = max6621_verify_reg_data(dev, regval); |
| 263 | if (ret) |
| 264 | return ret; |
| 265 | |
| 266 | *val = regval * 1000L; |
| 267 | |
| 268 | break; |
| 269 | case hwmon_temp_crit_alarm: |
| 270 | /* |
| 271 | * Set val to zero to recover the case, when reading |
| 272 | * MAX6621_TEMP_ALERT_CAUSE_REG results in for example |
| 273 | * MAX6621_ALERT_DIS. Reading will return with error, |
| 274 | * but in such case alarm should be returned as 0. |
| 275 | */ |
| 276 | *val = 0; |
| 277 | ret = regmap_read(data->regmap, |
| 278 | MAX6621_TEMP_ALERT_CAUSE_REG, |
| 279 | ®val); |
| 280 | if (ret) |
| 281 | return ret; |
| 282 | |
| 283 | ret = max6621_verify_reg_data(dev, regval); |
| 284 | if (ret) { |
| 285 | /* Do not report error if alert is disabled. */ |
| 286 | if (regval == MAX6621_ALERT_DIS) |
| 287 | return 0; |
| 288 | else |
| 289 | return ret; |
| 290 | } |
| 291 | |
| 292 | /* |
| 293 | * Clear the alert automatically, using send-byte |
| 294 | * smbus protocol for clearing alert. |
| 295 | */ |
| 296 | if (regval) { |
| 297 | ret = i2c_smbus_write_byte(data->client, |
| 298 | MAX6621_CLEAR_ALERT_REG); |
Dan Carpenter | 5813da1 | 2017-10-24 12:47:42 +0300 | [diff] [blame] | 299 | if (ret) |
Vadim Pasternak | 92b6458 | 2017-10-03 18:08:27 +0000 | [diff] [blame] | 300 | return ret; |
| 301 | } |
| 302 | |
| 303 | *val = !!regval; |
| 304 | |
| 305 | break; |
| 306 | default: |
| 307 | return -EOPNOTSUPP; |
| 308 | } |
| 309 | break; |
| 310 | |
| 311 | default: |
| 312 | return -EOPNOTSUPP; |
| 313 | } |
| 314 | |
| 315 | return 0; |
| 316 | } |
| 317 | |
| 318 | static int |
| 319 | max6621_write(struct device *dev, enum hwmon_sensor_types type, u32 attr, |
| 320 | int channel, long val) |
| 321 | { |
| 322 | struct max6621_data *data = dev_get_drvdata(dev); |
| 323 | u32 reg; |
| 324 | |
| 325 | switch (type) { |
| 326 | case hwmon_temp: |
| 327 | switch (attr) { |
| 328 | case hwmon_temp_offset: |
| 329 | /* Clamp to allowed range to prevent overflow. */ |
| 330 | val = clamp_val(val, MAX6621_TEMP_INPUT_MIN, |
| 331 | MAX6621_TEMP_INPUT_MAX); |
| 332 | val = max6621_temp_mc2reg(val); |
| 333 | |
| 334 | return regmap_write(data->regmap, |
| 335 | MAX6621_CONFIG2_REG, val); |
| 336 | case hwmon_temp_crit: |
| 337 | channel -= MAX6621_TEMP_ALERT_CHAN_SHIFT; |
| 338 | reg = max6621_temp_alert_chan2reg[channel]; |
| 339 | /* Clamp to allowed range to prevent overflow. */ |
| 340 | val = clamp_val(val, MAX6621_TEMP_INPUT_MIN, |
| 341 | MAX6621_TEMP_INPUT_MAX); |
| 342 | val = val / 1000L; |
| 343 | |
| 344 | return regmap_write(data->regmap, reg, val); |
| 345 | default: |
| 346 | return -EOPNOTSUPP; |
| 347 | } |
| 348 | break; |
| 349 | |
| 350 | default: |
| 351 | return -EOPNOTSUPP; |
| 352 | } |
| 353 | |
| 354 | return -EOPNOTSUPP; |
| 355 | } |
| 356 | |
| 357 | static int |
| 358 | max6621_read_string(struct device *dev, enum hwmon_sensor_types type, u32 attr, |
| 359 | int channel, const char **str) |
| 360 | { |
| 361 | switch (type) { |
| 362 | case hwmon_temp: |
| 363 | switch (attr) { |
| 364 | case hwmon_temp_label: |
| 365 | *str = max6621_temp_labels[channel]; |
| 366 | return 0; |
| 367 | default: |
| 368 | return -EOPNOTSUPP; |
| 369 | } |
| 370 | break; |
| 371 | default: |
| 372 | return -EOPNOTSUPP; |
| 373 | } |
| 374 | |
| 375 | return -EOPNOTSUPP; |
| 376 | } |
| 377 | |
| 378 | static bool max6621_writeable_reg(struct device *dev, unsigned int reg) |
| 379 | { |
| 380 | switch (reg) { |
| 381 | case MAX6621_CONFIG0_REG: |
| 382 | case MAX6621_CONFIG1_REG: |
| 383 | case MAX6621_CONFIG2_REG: |
| 384 | case MAX6621_CONFIG3_REG: |
| 385 | case MAX6621_TEMP_S0_ALERT_REG: |
| 386 | case MAX6621_TEMP_S1_ALERT_REG: |
| 387 | case MAX6621_TEMP_S2_ALERT_REG: |
| 388 | case MAX6621_TEMP_S3_ALERT_REG: |
| 389 | case MAX6621_TEMP_ALERT_CAUSE_REG: |
| 390 | return true; |
| 391 | } |
| 392 | return false; |
| 393 | } |
| 394 | |
| 395 | static bool max6621_readable_reg(struct device *dev, unsigned int reg) |
| 396 | { |
| 397 | switch (reg) { |
| 398 | case MAX6621_TEMP_S0D0_REG: |
| 399 | case MAX6621_TEMP_S0D1_REG: |
| 400 | case MAX6621_TEMP_S1D0_REG: |
| 401 | case MAX6621_TEMP_S1D1_REG: |
| 402 | case MAX6621_TEMP_S2D0_REG: |
| 403 | case MAX6621_TEMP_S2D1_REG: |
| 404 | case MAX6621_TEMP_S3D0_REG: |
| 405 | case MAX6621_TEMP_S3D1_REG: |
| 406 | case MAX6621_TEMP_MAX_REG: |
| 407 | case MAX6621_TEMP_MAX_ADDR_REG: |
| 408 | case MAX6621_CONFIG0_REG: |
| 409 | case MAX6621_CONFIG1_REG: |
| 410 | case MAX6621_CONFIG2_REG: |
| 411 | case MAX6621_CONFIG3_REG: |
| 412 | case MAX6621_TEMP_S0_ALERT_REG: |
| 413 | case MAX6621_TEMP_S1_ALERT_REG: |
| 414 | case MAX6621_TEMP_S2_ALERT_REG: |
| 415 | case MAX6621_TEMP_S3_ALERT_REG: |
| 416 | return true; |
| 417 | } |
| 418 | return false; |
| 419 | } |
| 420 | |
| 421 | static bool max6621_volatile_reg(struct device *dev, unsigned int reg) |
| 422 | { |
| 423 | switch (reg) { |
| 424 | case MAX6621_TEMP_S0D0_REG: |
| 425 | case MAX6621_TEMP_S0D1_REG: |
| 426 | case MAX6621_TEMP_S1D0_REG: |
| 427 | case MAX6621_TEMP_S1D1_REG: |
| 428 | case MAX6621_TEMP_S2D0_REG: |
| 429 | case MAX6621_TEMP_S2D1_REG: |
| 430 | case MAX6621_TEMP_S3D0_REG: |
| 431 | case MAX6621_TEMP_S3D1_REG: |
| 432 | case MAX6621_TEMP_MAX_REG: |
| 433 | case MAX6621_TEMP_S0_ALERT_REG: |
| 434 | case MAX6621_TEMP_S1_ALERT_REG: |
| 435 | case MAX6621_TEMP_S2_ALERT_REG: |
| 436 | case MAX6621_TEMP_S3_ALERT_REG: |
| 437 | case MAX6621_TEMP_ALERT_CAUSE_REG: |
| 438 | return true; |
| 439 | } |
| 440 | return false; |
| 441 | } |
| 442 | |
| 443 | static const struct reg_default max6621_regmap_default[] = { |
| 444 | { MAX6621_CONFIG0_REG, MAX6621_CONFIG0_INIT }, |
| 445 | { MAX6621_CONFIG1_REG, MAX6621_CONFIG1_INIT }, |
| 446 | }; |
| 447 | |
| 448 | static const struct regmap_config max6621_regmap_config = { |
| 449 | .reg_bits = 8, |
| 450 | .val_bits = 16, |
| 451 | .max_register = MAX6621_REG_MAX, |
| 452 | .val_format_endian = REGMAP_ENDIAN_LITTLE, |
| 453 | .cache_type = REGCACHE_FLAT, |
| 454 | .writeable_reg = max6621_writeable_reg, |
| 455 | .readable_reg = max6621_readable_reg, |
| 456 | .volatile_reg = max6621_volatile_reg, |
| 457 | .reg_defaults = max6621_regmap_default, |
| 458 | .num_reg_defaults = ARRAY_SIZE(max6621_regmap_default), |
| 459 | }; |
| 460 | |
| 461 | static u32 max6621_chip_config[] = { |
| 462 | HWMON_C_REGISTER_TZ, |
| 463 | 0 |
| 464 | }; |
| 465 | |
| 466 | static const struct hwmon_channel_info max6621_chip = { |
| 467 | .type = hwmon_chip, |
| 468 | .config = max6621_chip_config, |
| 469 | }; |
| 470 | |
| 471 | static const u32 max6621_temp_config[] = { |
| 472 | HWMON_T_INPUT | HWMON_T_LABEL | HWMON_T_OFFSET, |
| 473 | HWMON_T_INPUT | HWMON_T_CRIT | HWMON_T_CRIT_ALARM | HWMON_T_LABEL, |
| 474 | HWMON_T_INPUT | HWMON_T_CRIT | HWMON_T_CRIT_ALARM | HWMON_T_LABEL, |
| 475 | HWMON_T_INPUT | HWMON_T_CRIT | HWMON_T_CRIT_ALARM | HWMON_T_LABEL, |
| 476 | HWMON_T_INPUT | HWMON_T_CRIT | HWMON_T_CRIT_ALARM | HWMON_T_LABEL, |
| 477 | HWMON_T_INPUT | HWMON_T_LABEL, |
| 478 | HWMON_T_INPUT | HWMON_T_LABEL, |
| 479 | HWMON_T_INPUT | HWMON_T_LABEL, |
| 480 | HWMON_T_INPUT | HWMON_T_LABEL, |
| 481 | 0 |
| 482 | }; |
| 483 | |
| 484 | static const struct hwmon_channel_info max6621_temp = { |
| 485 | .type = hwmon_temp, |
| 486 | .config = max6621_temp_config, |
| 487 | }; |
| 488 | |
| 489 | static const struct hwmon_channel_info *max6621_info[] = { |
| 490 | &max6621_chip, |
| 491 | &max6621_temp, |
| 492 | NULL |
| 493 | }; |
| 494 | |
| 495 | static const struct hwmon_ops max6621_hwmon_ops = { |
| 496 | .read = max6621_read, |
| 497 | .write = max6621_write, |
| 498 | .read_string = max6621_read_string, |
| 499 | .is_visible = max6621_is_visible, |
| 500 | }; |
| 501 | |
| 502 | static const struct hwmon_chip_info max6621_chip_info = { |
| 503 | .ops = &max6621_hwmon_ops, |
| 504 | .info = max6621_info, |
| 505 | }; |
| 506 | |
| 507 | static int max6621_probe(struct i2c_client *client, |
| 508 | const struct i2c_device_id *id) |
| 509 | { |
| 510 | struct device *dev = &client->dev; |
| 511 | struct max6621_data *data; |
| 512 | struct device *hwmon_dev; |
| 513 | int i; |
| 514 | int ret; |
| 515 | |
| 516 | data = devm_kzalloc(dev, sizeof(*data), GFP_KERNEL); |
| 517 | if (!data) |
| 518 | return -ENOMEM; |
| 519 | |
| 520 | data->regmap = devm_regmap_init_i2c(client, &max6621_regmap_config); |
| 521 | if (IS_ERR(data->regmap)) |
| 522 | return PTR_ERR(data->regmap); |
| 523 | |
| 524 | i2c_set_clientdata(client, data); |
| 525 | data->client = client; |
| 526 | |
| 527 | /* Set CONFIG0 register masking temperature alerts and PEC. */ |
| 528 | ret = regmap_write(data->regmap, MAX6621_CONFIG0_REG, |
| 529 | MAX6621_CONFIG0_INIT); |
| 530 | if (ret) |
| 531 | return ret; |
| 532 | |
| 533 | /* Set CONFIG1 register for PEC access retry number. */ |
| 534 | ret = regmap_write(data->regmap, MAX6621_CONFIG1_REG, |
| 535 | MAX6621_CONFIG1_INIT); |
| 536 | if (ret) |
| 537 | return ret; |
| 538 | |
| 539 | /* Sync registers with hardware. */ |
| 540 | regcache_mark_dirty(data->regmap); |
| 541 | ret = regcache_sync(data->regmap); |
| 542 | if (ret) |
| 543 | return ret; |
| 544 | |
| 545 | /* Verify which temperature input registers are enabled. */ |
| 546 | for (i = 0; i < MAX6621_TEMP_INPUT_REG_NUM; i++) { |
| 547 | ret = i2c_smbus_read_word_data(client, max6621_temp_regs[i]); |
| 548 | if (ret < 0) |
| 549 | return ret; |
| 550 | ret = max6621_verify_reg_data(dev, ret); |
| 551 | if (ret) { |
| 552 | data->input_chan2reg[i] = -1; |
| 553 | continue; |
| 554 | } |
| 555 | |
| 556 | data->input_chan2reg[i] = max6621_temp_regs[i]; |
| 557 | } |
| 558 | |
| 559 | hwmon_dev = devm_hwmon_device_register_with_info(dev, client->name, |
| 560 | data, |
| 561 | &max6621_chip_info, |
| 562 | NULL); |
| 563 | |
| 564 | return PTR_ERR_OR_ZERO(hwmon_dev); |
| 565 | } |
| 566 | |
| 567 | static const struct i2c_device_id max6621_id[] = { |
| 568 | { MAX6621_DRV_NAME, 0 }, |
| 569 | { } |
| 570 | }; |
| 571 | MODULE_DEVICE_TABLE(i2c, max6621_id); |
| 572 | |
| 573 | static const struct of_device_id max6621_of_match[] = { |
| 574 | { .compatible = "maxim,max6621" }, |
| 575 | { } |
| 576 | }; |
| 577 | MODULE_DEVICE_TABLE(of, max6621_of_match); |
| 578 | |
| 579 | static struct i2c_driver max6621_driver = { |
| 580 | .class = I2C_CLASS_HWMON, |
| 581 | .driver = { |
| 582 | .name = MAX6621_DRV_NAME, |
| 583 | .of_match_table = of_match_ptr(max6621_of_match), |
| 584 | }, |
| 585 | .probe = max6621_probe, |
| 586 | .id_table = max6621_id, |
| 587 | }; |
| 588 | |
| 589 | module_i2c_driver(max6621_driver); |
| 590 | |
| 591 | MODULE_AUTHOR("Vadim Pasternak <vadimp@mellanox.com>"); |
| 592 | MODULE_DESCRIPTION("Driver for Maxim MAX6621"); |
| 593 | MODULE_LICENSE("GPL"); |