Mian Yousaf Kaukab | 9691523 | 2010-12-07 15:00:09 +0100 | [diff] [blame] | 1 | /* |
| 2 | * drivers/usb/otg/ab8500_usb.c |
| 3 | * |
| 4 | * USB transceiver driver for AB8500 chip |
| 5 | * |
| 6 | * Copyright (C) 2010 ST-Ericsson AB |
| 7 | * Mian Yousaf Kaukab <mian.yousaf.kaukab@stericsson.com> |
| 8 | * |
| 9 | * This program is free software; you can redistribute it and/or modify |
| 10 | * it under the terms of the GNU General Public License as published by |
| 11 | * the Free Software Foundation; either version 2 of the License, or |
| 12 | * (at your option) any later version. |
| 13 | * |
| 14 | * This program is distributed in the hope that it will be useful, |
| 15 | * but WITHOUT ANY WARRANTY; without even the implied warranty of |
| 16 | * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the |
| 17 | * GNU General Public License for more details. |
| 18 | * |
| 19 | * You should have received a copy of the GNU General Public License |
| 20 | * along with this program; if not, write to the Free Software |
| 21 | * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. |
| 22 | * |
| 23 | */ |
| 24 | |
| 25 | #include <linux/module.h> |
| 26 | #include <linux/platform_device.h> |
| 27 | #include <linux/usb/otg.h> |
| 28 | #include <linux/slab.h> |
| 29 | #include <linux/notifier.h> |
| 30 | #include <linux/interrupt.h> |
| 31 | #include <linux/delay.h> |
| 32 | #include <linux/mfd/abx500.h> |
Linus Walleij | ee66e65 | 2011-12-02 14:16:33 +0100 | [diff] [blame^] | 33 | #include <linux/mfd/abx500/ab8500.h> |
Mian Yousaf Kaukab | 9691523 | 2010-12-07 15:00:09 +0100 | [diff] [blame] | 34 | |
| 35 | #define AB8500_MAIN_WD_CTRL_REG 0x01 |
| 36 | #define AB8500_USB_LINE_STAT_REG 0x80 |
| 37 | #define AB8500_USB_PHY_CTRL_REG 0x8A |
| 38 | |
| 39 | #define AB8500_BIT_OTG_STAT_ID (1 << 0) |
| 40 | #define AB8500_BIT_PHY_CTRL_HOST_EN (1 << 0) |
| 41 | #define AB8500_BIT_PHY_CTRL_DEVICE_EN (1 << 1) |
| 42 | #define AB8500_BIT_WD_CTRL_ENABLE (1 << 0) |
| 43 | #define AB8500_BIT_WD_CTRL_KICK (1 << 1) |
| 44 | |
| 45 | #define AB8500_V1x_LINK_STAT_WAIT (HZ/10) |
| 46 | #define AB8500_WD_KICK_DELAY_US 100 /* usec */ |
| 47 | #define AB8500_WD_V11_DISABLE_DELAY_US 100 /* usec */ |
| 48 | #define AB8500_WD_V10_DISABLE_DELAY_MS 100 /* ms */ |
| 49 | |
| 50 | /* Usb line status register */ |
| 51 | enum ab8500_usb_link_status { |
| 52 | USB_LINK_NOT_CONFIGURED = 0, |
| 53 | USB_LINK_STD_HOST_NC, |
| 54 | USB_LINK_STD_HOST_C_NS, |
| 55 | USB_LINK_STD_HOST_C_S, |
| 56 | USB_LINK_HOST_CHG_NM, |
| 57 | USB_LINK_HOST_CHG_HS, |
| 58 | USB_LINK_HOST_CHG_HS_CHIRP, |
| 59 | USB_LINK_DEDICATED_CHG, |
| 60 | USB_LINK_ACA_RID_A, |
| 61 | USB_LINK_ACA_RID_B, |
| 62 | USB_LINK_ACA_RID_C_NM, |
| 63 | USB_LINK_ACA_RID_C_HS, |
| 64 | USB_LINK_ACA_RID_C_HS_CHIRP, |
| 65 | USB_LINK_HM_IDGND, |
| 66 | USB_LINK_RESERVED, |
| 67 | USB_LINK_NOT_VALID_LINK |
| 68 | }; |
| 69 | |
| 70 | struct ab8500_usb { |
| 71 | struct otg_transceiver otg; |
| 72 | struct device *dev; |
| 73 | int irq_num_id_rise; |
| 74 | int irq_num_id_fall; |
| 75 | int irq_num_vbus_rise; |
| 76 | int irq_num_vbus_fall; |
| 77 | int irq_num_link_status; |
| 78 | unsigned vbus_draw; |
| 79 | struct delayed_work dwork; |
| 80 | struct work_struct phy_dis_work; |
| 81 | unsigned long link_status_wait; |
| 82 | int rev; |
| 83 | }; |
| 84 | |
| 85 | static inline struct ab8500_usb *xceiv_to_ab(struct otg_transceiver *x) |
| 86 | { |
| 87 | return container_of(x, struct ab8500_usb, otg); |
| 88 | } |
| 89 | |
| 90 | static void ab8500_usb_wd_workaround(struct ab8500_usb *ab) |
| 91 | { |
| 92 | abx500_set_register_interruptible(ab->dev, |
| 93 | AB8500_SYS_CTRL2_BLOCK, |
| 94 | AB8500_MAIN_WD_CTRL_REG, |
| 95 | AB8500_BIT_WD_CTRL_ENABLE); |
| 96 | |
| 97 | udelay(AB8500_WD_KICK_DELAY_US); |
| 98 | |
| 99 | abx500_set_register_interruptible(ab->dev, |
| 100 | AB8500_SYS_CTRL2_BLOCK, |
| 101 | AB8500_MAIN_WD_CTRL_REG, |
| 102 | (AB8500_BIT_WD_CTRL_ENABLE |
| 103 | | AB8500_BIT_WD_CTRL_KICK)); |
| 104 | |
| 105 | if (ab->rev > 0x10) /* v1.1 v2.0 */ |
| 106 | udelay(AB8500_WD_V11_DISABLE_DELAY_US); |
| 107 | else /* v1.0 */ |
| 108 | msleep(AB8500_WD_V10_DISABLE_DELAY_MS); |
| 109 | |
| 110 | abx500_set_register_interruptible(ab->dev, |
| 111 | AB8500_SYS_CTRL2_BLOCK, |
| 112 | AB8500_MAIN_WD_CTRL_REG, |
| 113 | 0); |
| 114 | } |
| 115 | |
| 116 | static void ab8500_usb_phy_ctrl(struct ab8500_usb *ab, bool sel_host, |
| 117 | bool enable) |
| 118 | { |
| 119 | u8 ctrl_reg; |
| 120 | abx500_get_register_interruptible(ab->dev, |
| 121 | AB8500_USB, |
| 122 | AB8500_USB_PHY_CTRL_REG, |
| 123 | &ctrl_reg); |
| 124 | if (sel_host) { |
| 125 | if (enable) |
| 126 | ctrl_reg |= AB8500_BIT_PHY_CTRL_HOST_EN; |
| 127 | else |
| 128 | ctrl_reg &= ~AB8500_BIT_PHY_CTRL_HOST_EN; |
| 129 | } else { |
| 130 | if (enable) |
| 131 | ctrl_reg |= AB8500_BIT_PHY_CTRL_DEVICE_EN; |
| 132 | else |
| 133 | ctrl_reg &= ~AB8500_BIT_PHY_CTRL_DEVICE_EN; |
| 134 | } |
| 135 | |
| 136 | abx500_set_register_interruptible(ab->dev, |
| 137 | AB8500_USB, |
| 138 | AB8500_USB_PHY_CTRL_REG, |
| 139 | ctrl_reg); |
| 140 | |
| 141 | /* Needed to enable the phy.*/ |
| 142 | if (enable) |
| 143 | ab8500_usb_wd_workaround(ab); |
| 144 | } |
| 145 | |
| 146 | #define ab8500_usb_host_phy_en(ab) ab8500_usb_phy_ctrl(ab, true, true) |
| 147 | #define ab8500_usb_host_phy_dis(ab) ab8500_usb_phy_ctrl(ab, true, false) |
| 148 | #define ab8500_usb_peri_phy_en(ab) ab8500_usb_phy_ctrl(ab, false, true) |
| 149 | #define ab8500_usb_peri_phy_dis(ab) ab8500_usb_phy_ctrl(ab, false, false) |
| 150 | |
| 151 | static int ab8500_usb_link_status_update(struct ab8500_usb *ab) |
| 152 | { |
| 153 | u8 reg; |
| 154 | enum ab8500_usb_link_status lsts; |
| 155 | void *v = NULL; |
| 156 | enum usb_xceiv_events event; |
| 157 | |
| 158 | abx500_get_register_interruptible(ab->dev, |
| 159 | AB8500_USB, |
| 160 | AB8500_USB_LINE_STAT_REG, |
| 161 | ®); |
| 162 | |
| 163 | lsts = (reg >> 3) & 0x0F; |
| 164 | |
| 165 | switch (lsts) { |
| 166 | case USB_LINK_NOT_CONFIGURED: |
| 167 | case USB_LINK_RESERVED: |
| 168 | case USB_LINK_NOT_VALID_LINK: |
| 169 | /* TODO: Disable regulators. */ |
| 170 | ab8500_usb_host_phy_dis(ab); |
| 171 | ab8500_usb_peri_phy_dis(ab); |
| 172 | ab->otg.state = OTG_STATE_B_IDLE; |
| 173 | ab->otg.default_a = false; |
| 174 | ab->vbus_draw = 0; |
| 175 | event = USB_EVENT_NONE; |
| 176 | break; |
| 177 | |
| 178 | case USB_LINK_STD_HOST_NC: |
| 179 | case USB_LINK_STD_HOST_C_NS: |
| 180 | case USB_LINK_STD_HOST_C_S: |
| 181 | case USB_LINK_HOST_CHG_NM: |
| 182 | case USB_LINK_HOST_CHG_HS: |
| 183 | case USB_LINK_HOST_CHG_HS_CHIRP: |
| 184 | if (ab->otg.gadget) { |
| 185 | /* TODO: Enable regulators. */ |
| 186 | ab8500_usb_peri_phy_en(ab); |
| 187 | v = ab->otg.gadget; |
| 188 | } |
| 189 | event = USB_EVENT_VBUS; |
| 190 | break; |
| 191 | |
| 192 | case USB_LINK_HM_IDGND: |
| 193 | if (ab->otg.host) { |
| 194 | /* TODO: Enable regulators. */ |
| 195 | ab8500_usb_host_phy_en(ab); |
| 196 | v = ab->otg.host; |
| 197 | } |
| 198 | ab->otg.state = OTG_STATE_A_IDLE; |
| 199 | ab->otg.default_a = true; |
| 200 | event = USB_EVENT_ID; |
| 201 | break; |
| 202 | |
| 203 | case USB_LINK_ACA_RID_A: |
| 204 | case USB_LINK_ACA_RID_B: |
| 205 | /* TODO */ |
| 206 | case USB_LINK_ACA_RID_C_NM: |
| 207 | case USB_LINK_ACA_RID_C_HS: |
| 208 | case USB_LINK_ACA_RID_C_HS_CHIRP: |
| 209 | case USB_LINK_DEDICATED_CHG: |
| 210 | /* TODO: vbus_draw */ |
| 211 | event = USB_EVENT_CHARGER; |
| 212 | break; |
| 213 | } |
| 214 | |
Felipe Balbi | cccad6d | 2010-09-29 10:55:49 +0300 | [diff] [blame] | 215 | atomic_notifier_call_chain(&ab->otg.notifier, event, v); |
Mian Yousaf Kaukab | 9691523 | 2010-12-07 15:00:09 +0100 | [diff] [blame] | 216 | |
| 217 | return 0; |
| 218 | } |
| 219 | |
| 220 | static void ab8500_usb_delayed_work(struct work_struct *work) |
| 221 | { |
| 222 | struct ab8500_usb *ab = container_of(work, struct ab8500_usb, |
| 223 | dwork.work); |
| 224 | |
| 225 | ab8500_usb_link_status_update(ab); |
| 226 | } |
| 227 | |
| 228 | static irqreturn_t ab8500_usb_v1x_common_irq(int irq, void *data) |
| 229 | { |
| 230 | struct ab8500_usb *ab = (struct ab8500_usb *) data; |
| 231 | |
| 232 | /* Wait for link status to become stable. */ |
| 233 | schedule_delayed_work(&ab->dwork, ab->link_status_wait); |
| 234 | |
| 235 | return IRQ_HANDLED; |
| 236 | } |
| 237 | |
| 238 | static irqreturn_t ab8500_usb_v1x_vbus_fall_irq(int irq, void *data) |
| 239 | { |
| 240 | struct ab8500_usb *ab = (struct ab8500_usb *) data; |
| 241 | |
| 242 | /* Link status will not be updated till phy is disabled. */ |
| 243 | ab8500_usb_peri_phy_dis(ab); |
| 244 | |
| 245 | /* Wait for link status to become stable. */ |
| 246 | schedule_delayed_work(&ab->dwork, ab->link_status_wait); |
| 247 | |
| 248 | return IRQ_HANDLED; |
| 249 | } |
| 250 | |
| 251 | static irqreturn_t ab8500_usb_v20_irq(int irq, void *data) |
| 252 | { |
| 253 | struct ab8500_usb *ab = (struct ab8500_usb *) data; |
| 254 | |
| 255 | ab8500_usb_link_status_update(ab); |
| 256 | |
| 257 | return IRQ_HANDLED; |
| 258 | } |
| 259 | |
| 260 | static void ab8500_usb_phy_disable_work(struct work_struct *work) |
| 261 | { |
| 262 | struct ab8500_usb *ab = container_of(work, struct ab8500_usb, |
| 263 | phy_dis_work); |
| 264 | |
| 265 | if (!ab->otg.host) |
| 266 | ab8500_usb_host_phy_dis(ab); |
| 267 | |
| 268 | if (!ab->otg.gadget) |
| 269 | ab8500_usb_peri_phy_dis(ab); |
| 270 | } |
| 271 | |
| 272 | static int ab8500_usb_set_power(struct otg_transceiver *otg, unsigned mA) |
| 273 | { |
| 274 | struct ab8500_usb *ab; |
| 275 | |
| 276 | if (!otg) |
| 277 | return -ENODEV; |
| 278 | |
| 279 | ab = xceiv_to_ab(otg); |
| 280 | |
| 281 | ab->vbus_draw = mA; |
| 282 | |
| 283 | if (mA) |
Felipe Balbi | cccad6d | 2010-09-29 10:55:49 +0300 | [diff] [blame] | 284 | atomic_notifier_call_chain(&ab->otg.notifier, |
Mian Yousaf Kaukab | 9691523 | 2010-12-07 15:00:09 +0100 | [diff] [blame] | 285 | USB_EVENT_ENUMERATED, ab->otg.gadget); |
| 286 | return 0; |
| 287 | } |
| 288 | |
| 289 | /* TODO: Implement some way for charging or other drivers to read |
| 290 | * ab->vbus_draw. |
| 291 | */ |
| 292 | |
| 293 | static int ab8500_usb_set_suspend(struct otg_transceiver *x, int suspend) |
| 294 | { |
| 295 | /* TODO */ |
| 296 | return 0; |
| 297 | } |
| 298 | |
| 299 | static int ab8500_usb_set_peripheral(struct otg_transceiver *otg, |
| 300 | struct usb_gadget *gadget) |
| 301 | { |
| 302 | struct ab8500_usb *ab; |
| 303 | |
| 304 | if (!otg) |
| 305 | return -ENODEV; |
| 306 | |
| 307 | ab = xceiv_to_ab(otg); |
| 308 | |
| 309 | /* Some drivers call this function in atomic context. |
| 310 | * Do not update ab8500 registers directly till this |
| 311 | * is fixed. |
| 312 | */ |
| 313 | |
| 314 | if (!gadget) { |
| 315 | /* TODO: Disable regulators. */ |
| 316 | ab->otg.gadget = NULL; |
| 317 | schedule_work(&ab->phy_dis_work); |
| 318 | } else { |
| 319 | ab->otg.gadget = gadget; |
| 320 | ab->otg.state = OTG_STATE_B_IDLE; |
| 321 | |
| 322 | /* Phy will not be enabled if cable is already |
| 323 | * plugged-in. Schedule to enable phy. |
| 324 | * Use same delay to avoid any race condition. |
| 325 | */ |
| 326 | schedule_delayed_work(&ab->dwork, ab->link_status_wait); |
| 327 | } |
| 328 | |
| 329 | return 0; |
| 330 | } |
| 331 | |
| 332 | static int ab8500_usb_set_host(struct otg_transceiver *otg, |
| 333 | struct usb_bus *host) |
| 334 | { |
| 335 | struct ab8500_usb *ab; |
| 336 | |
| 337 | if (!otg) |
| 338 | return -ENODEV; |
| 339 | |
| 340 | ab = xceiv_to_ab(otg); |
| 341 | |
| 342 | /* Some drivers call this function in atomic context. |
| 343 | * Do not update ab8500 registers directly till this |
| 344 | * is fixed. |
| 345 | */ |
| 346 | |
| 347 | if (!host) { |
| 348 | /* TODO: Disable regulators. */ |
| 349 | ab->otg.host = NULL; |
| 350 | schedule_work(&ab->phy_dis_work); |
| 351 | } else { |
| 352 | ab->otg.host = host; |
| 353 | /* Phy will not be enabled if cable is already |
| 354 | * plugged-in. Schedule to enable phy. |
| 355 | * Use same delay to avoid any race condition. |
| 356 | */ |
| 357 | schedule_delayed_work(&ab->dwork, ab->link_status_wait); |
| 358 | } |
| 359 | |
| 360 | return 0; |
| 361 | } |
| 362 | |
| 363 | static void ab8500_usb_irq_free(struct ab8500_usb *ab) |
| 364 | { |
| 365 | if (ab->rev < 0x20) { |
| 366 | free_irq(ab->irq_num_id_rise, ab); |
| 367 | free_irq(ab->irq_num_id_fall, ab); |
| 368 | free_irq(ab->irq_num_vbus_rise, ab); |
| 369 | free_irq(ab->irq_num_vbus_fall, ab); |
| 370 | } else { |
| 371 | free_irq(ab->irq_num_link_status, ab); |
| 372 | } |
| 373 | } |
| 374 | |
| 375 | static int ab8500_usb_v1x_res_setup(struct platform_device *pdev, |
| 376 | struct ab8500_usb *ab) |
| 377 | { |
| 378 | int err; |
| 379 | |
| 380 | ab->irq_num_id_rise = platform_get_irq_byname(pdev, "ID_WAKEUP_R"); |
| 381 | if (ab->irq_num_id_rise < 0) { |
| 382 | dev_err(&pdev->dev, "ID rise irq not found\n"); |
| 383 | return ab->irq_num_id_rise; |
| 384 | } |
| 385 | err = request_threaded_irq(ab->irq_num_id_rise, NULL, |
| 386 | ab8500_usb_v1x_common_irq, |
| 387 | IRQF_NO_SUSPEND | IRQF_SHARED, |
| 388 | "usb-id-rise", ab); |
| 389 | if (err < 0) { |
| 390 | dev_err(ab->dev, "request_irq failed for ID rise irq\n"); |
| 391 | goto fail0; |
| 392 | } |
| 393 | |
| 394 | ab->irq_num_id_fall = platform_get_irq_byname(pdev, "ID_WAKEUP_F"); |
| 395 | if (ab->irq_num_id_fall < 0) { |
| 396 | dev_err(&pdev->dev, "ID fall irq not found\n"); |
| 397 | return ab->irq_num_id_fall; |
| 398 | } |
| 399 | err = request_threaded_irq(ab->irq_num_id_fall, NULL, |
| 400 | ab8500_usb_v1x_common_irq, |
| 401 | IRQF_NO_SUSPEND | IRQF_SHARED, |
| 402 | "usb-id-fall", ab); |
| 403 | if (err < 0) { |
| 404 | dev_err(ab->dev, "request_irq failed for ID fall irq\n"); |
| 405 | goto fail1; |
| 406 | } |
| 407 | |
| 408 | ab->irq_num_vbus_rise = platform_get_irq_byname(pdev, "VBUS_DET_R"); |
| 409 | if (ab->irq_num_vbus_rise < 0) { |
| 410 | dev_err(&pdev->dev, "VBUS rise irq not found\n"); |
| 411 | return ab->irq_num_vbus_rise; |
| 412 | } |
| 413 | err = request_threaded_irq(ab->irq_num_vbus_rise, NULL, |
| 414 | ab8500_usb_v1x_common_irq, |
| 415 | IRQF_NO_SUSPEND | IRQF_SHARED, |
| 416 | "usb-vbus-rise", ab); |
| 417 | if (err < 0) { |
| 418 | dev_err(ab->dev, "request_irq failed for Vbus rise irq\n"); |
| 419 | goto fail2; |
| 420 | } |
| 421 | |
| 422 | ab->irq_num_vbus_fall = platform_get_irq_byname(pdev, "VBUS_DET_F"); |
| 423 | if (ab->irq_num_vbus_fall < 0) { |
| 424 | dev_err(&pdev->dev, "VBUS fall irq not found\n"); |
| 425 | return ab->irq_num_vbus_fall; |
| 426 | } |
| 427 | err = request_threaded_irq(ab->irq_num_vbus_fall, NULL, |
| 428 | ab8500_usb_v1x_vbus_fall_irq, |
| 429 | IRQF_NO_SUSPEND | IRQF_SHARED, |
| 430 | "usb-vbus-fall", ab); |
| 431 | if (err < 0) { |
| 432 | dev_err(ab->dev, "request_irq failed for Vbus fall irq\n"); |
| 433 | goto fail3; |
| 434 | } |
| 435 | |
| 436 | return 0; |
| 437 | fail3: |
| 438 | free_irq(ab->irq_num_vbus_rise, ab); |
| 439 | fail2: |
| 440 | free_irq(ab->irq_num_id_fall, ab); |
| 441 | fail1: |
| 442 | free_irq(ab->irq_num_id_rise, ab); |
| 443 | fail0: |
| 444 | return err; |
| 445 | } |
| 446 | |
| 447 | static int ab8500_usb_v2_res_setup(struct platform_device *pdev, |
| 448 | struct ab8500_usb *ab) |
| 449 | { |
| 450 | int err; |
| 451 | |
| 452 | ab->irq_num_link_status = platform_get_irq_byname(pdev, |
| 453 | "USB_LINK_STATUS"); |
| 454 | if (ab->irq_num_link_status < 0) { |
| 455 | dev_err(&pdev->dev, "Link status irq not found\n"); |
| 456 | return ab->irq_num_link_status; |
| 457 | } |
| 458 | |
| 459 | err = request_threaded_irq(ab->irq_num_link_status, NULL, |
| 460 | ab8500_usb_v20_irq, |
| 461 | IRQF_NO_SUSPEND | IRQF_SHARED, |
| 462 | "usb-link-status", ab); |
| 463 | if (err < 0) { |
| 464 | dev_err(ab->dev, |
| 465 | "request_irq failed for link status irq\n"); |
| 466 | return err; |
| 467 | } |
| 468 | |
| 469 | return 0; |
| 470 | } |
| 471 | |
| 472 | static int __devinit ab8500_usb_probe(struct platform_device *pdev) |
| 473 | { |
| 474 | struct ab8500_usb *ab; |
| 475 | int err; |
| 476 | int rev; |
| 477 | |
| 478 | rev = abx500_get_chip_id(&pdev->dev); |
| 479 | if (rev < 0) { |
| 480 | dev_err(&pdev->dev, "Chip id read failed\n"); |
| 481 | return rev; |
| 482 | } else if (rev < 0x10) { |
| 483 | dev_err(&pdev->dev, "Unsupported AB8500 chip\n"); |
| 484 | return -ENODEV; |
| 485 | } |
| 486 | |
| 487 | ab = kzalloc(sizeof *ab, GFP_KERNEL); |
| 488 | if (!ab) |
| 489 | return -ENOMEM; |
| 490 | |
| 491 | ab->dev = &pdev->dev; |
| 492 | ab->rev = rev; |
| 493 | ab->otg.dev = ab->dev; |
| 494 | ab->otg.label = "ab8500"; |
| 495 | ab->otg.state = OTG_STATE_UNDEFINED; |
| 496 | ab->otg.set_host = ab8500_usb_set_host; |
| 497 | ab->otg.set_peripheral = ab8500_usb_set_peripheral; |
| 498 | ab->otg.set_suspend = ab8500_usb_set_suspend; |
| 499 | ab->otg.set_power = ab8500_usb_set_power; |
| 500 | |
| 501 | platform_set_drvdata(pdev, ab); |
| 502 | |
Felipe Balbi | cccad6d | 2010-09-29 10:55:49 +0300 | [diff] [blame] | 503 | ATOMIC_INIT_NOTIFIER_HEAD(&ab->otg.notifier); |
Mian Yousaf Kaukab | 9691523 | 2010-12-07 15:00:09 +0100 | [diff] [blame] | 504 | |
| 505 | /* v1: Wait for link status to become stable. |
| 506 | * all: Updates form set_host and set_peripheral as they are atomic. |
| 507 | */ |
| 508 | INIT_DELAYED_WORK(&ab->dwork, ab8500_usb_delayed_work); |
| 509 | |
| 510 | /* all: Disable phy when called from set_host and set_peripheral */ |
| 511 | INIT_WORK(&ab->phy_dis_work, ab8500_usb_phy_disable_work); |
| 512 | |
| 513 | if (ab->rev < 0x20) { |
| 514 | err = ab8500_usb_v1x_res_setup(pdev, ab); |
| 515 | ab->link_status_wait = AB8500_V1x_LINK_STAT_WAIT; |
| 516 | } else { |
| 517 | err = ab8500_usb_v2_res_setup(pdev, ab); |
| 518 | } |
| 519 | |
| 520 | if (err < 0) |
| 521 | goto fail0; |
| 522 | |
| 523 | err = otg_set_transceiver(&ab->otg); |
| 524 | if (err) { |
| 525 | dev_err(&pdev->dev, "Can't register transceiver\n"); |
| 526 | goto fail1; |
| 527 | } |
| 528 | |
| 529 | dev_info(&pdev->dev, "AB8500 usb driver initialized\n"); |
| 530 | |
| 531 | return 0; |
| 532 | fail1: |
| 533 | ab8500_usb_irq_free(ab); |
| 534 | fail0: |
| 535 | kfree(ab); |
| 536 | return err; |
| 537 | } |
| 538 | |
| 539 | static int __devexit ab8500_usb_remove(struct platform_device *pdev) |
| 540 | { |
| 541 | struct ab8500_usb *ab = platform_get_drvdata(pdev); |
| 542 | |
| 543 | ab8500_usb_irq_free(ab); |
| 544 | |
| 545 | cancel_delayed_work_sync(&ab->dwork); |
| 546 | |
| 547 | cancel_work_sync(&ab->phy_dis_work); |
| 548 | |
| 549 | otg_set_transceiver(NULL); |
| 550 | |
| 551 | ab8500_usb_host_phy_dis(ab); |
| 552 | ab8500_usb_peri_phy_dis(ab); |
| 553 | |
| 554 | platform_set_drvdata(pdev, NULL); |
| 555 | |
| 556 | kfree(ab); |
| 557 | |
| 558 | return 0; |
| 559 | } |
| 560 | |
| 561 | static struct platform_driver ab8500_usb_driver = { |
| 562 | .probe = ab8500_usb_probe, |
| 563 | .remove = __devexit_p(ab8500_usb_remove), |
| 564 | .driver = { |
| 565 | .name = "ab8500-usb", |
| 566 | .owner = THIS_MODULE, |
| 567 | }, |
| 568 | }; |
| 569 | |
| 570 | static int __init ab8500_usb_init(void) |
| 571 | { |
| 572 | return platform_driver_register(&ab8500_usb_driver); |
| 573 | } |
| 574 | subsys_initcall(ab8500_usb_init); |
| 575 | |
| 576 | static void __exit ab8500_usb_exit(void) |
| 577 | { |
| 578 | platform_driver_unregister(&ab8500_usb_driver); |
| 579 | } |
| 580 | module_exit(ab8500_usb_exit); |
| 581 | |
| 582 | MODULE_ALIAS("platform:ab8500_usb"); |
| 583 | MODULE_AUTHOR("ST-Ericsson AB"); |
| 584 | MODULE_DESCRIPTION("AB8500 usb transceiver driver"); |
| 585 | MODULE_LICENSE("GPL"); |