Guennadi Liakhovetski | acad189 | 2012-11-22 11:12:04 +0100 | [diff] [blame] | 1 | /* |
| 2 | * AS3711 PMIC MFC driver |
| 3 | * |
| 4 | * Copyright (C) 2012 Renesas Electronics Corporation |
| 5 | * Author: Guennadi Liakhovetski, <g.liakhovetski@gmx.de> |
| 6 | * |
| 7 | * This program is free software; you can redistribute it and/or modify |
| 8 | * it under the terms of the version 2 of the GNU General Public License as |
| 9 | * published by the Free Software Foundation |
| 10 | */ |
| 11 | |
| 12 | #include <linux/device.h> |
| 13 | #include <linux/err.h> |
| 14 | #include <linux/i2c.h> |
| 15 | #include <linux/init.h> |
| 16 | #include <linux/kernel.h> |
| 17 | #include <linux/mfd/as3711.h> |
| 18 | #include <linux/mfd/core.h> |
| 19 | #include <linux/module.h> |
| 20 | #include <linux/regmap.h> |
| 21 | #include <linux/slab.h> |
| 22 | |
| 23 | enum { |
| 24 | AS3711_REGULATOR, |
| 25 | AS3711_BACKLIGHT, |
| 26 | }; |
| 27 | |
| 28 | /* |
| 29 | * Ok to have it static: it is only used during probing and multiple I2C devices |
| 30 | * cannot be probed simultaneously. Just make sure to avoid stale data. |
| 31 | */ |
| 32 | static struct mfd_cell as3711_subdevs[] = { |
| 33 | [AS3711_REGULATOR] = {.name = "as3711-regulator",}, |
| 34 | [AS3711_BACKLIGHT] = {.name = "as3711-backlight",}, |
| 35 | }; |
| 36 | |
| 37 | static bool as3711_volatile_reg(struct device *dev, unsigned int reg) |
| 38 | { |
| 39 | switch (reg) { |
| 40 | case AS3711_GPIO_SIGNAL_IN: |
| 41 | case AS3711_INTERRUPT_STATUS_1: |
| 42 | case AS3711_INTERRUPT_STATUS_2: |
| 43 | case AS3711_INTERRUPT_STATUS_3: |
| 44 | case AS3711_CHARGER_STATUS_1: |
| 45 | case AS3711_CHARGER_STATUS_2: |
| 46 | case AS3711_REG_STATUS: |
| 47 | return true; |
| 48 | } |
| 49 | return false; |
| 50 | } |
| 51 | |
| 52 | static bool as3711_precious_reg(struct device *dev, unsigned int reg) |
| 53 | { |
| 54 | switch (reg) { |
| 55 | case AS3711_INTERRUPT_STATUS_1: |
| 56 | case AS3711_INTERRUPT_STATUS_2: |
| 57 | case AS3711_INTERRUPT_STATUS_3: |
| 58 | return true; |
| 59 | } |
| 60 | return false; |
| 61 | } |
| 62 | |
| 63 | static bool as3711_readable_reg(struct device *dev, unsigned int reg) |
| 64 | { |
| 65 | switch (reg) { |
| 66 | case AS3711_SD_1_VOLTAGE: |
| 67 | case AS3711_SD_2_VOLTAGE: |
| 68 | case AS3711_SD_3_VOLTAGE: |
| 69 | case AS3711_SD_4_VOLTAGE: |
| 70 | case AS3711_LDO_1_VOLTAGE: |
| 71 | case AS3711_LDO_2_VOLTAGE: |
| 72 | case AS3711_LDO_3_VOLTAGE: |
| 73 | case AS3711_LDO_4_VOLTAGE: |
| 74 | case AS3711_LDO_5_VOLTAGE: |
| 75 | case AS3711_LDO_6_VOLTAGE: |
| 76 | case AS3711_LDO_7_VOLTAGE: |
| 77 | case AS3711_LDO_8_VOLTAGE: |
| 78 | case AS3711_SD_CONTROL: |
| 79 | case AS3711_GPIO_SIGNAL_OUT: |
| 80 | case AS3711_GPIO_SIGNAL_IN: |
| 81 | case AS3711_SD_CONTROL_1: |
| 82 | case AS3711_SD_CONTROL_2: |
| 83 | case AS3711_CURR_CONTROL: |
| 84 | case AS3711_CURR1_VALUE: |
| 85 | case AS3711_CURR2_VALUE: |
| 86 | case AS3711_CURR3_VALUE: |
| 87 | case AS3711_STEPUP_CONTROL_1: |
| 88 | case AS3711_STEPUP_CONTROL_2: |
| 89 | case AS3711_STEPUP_CONTROL_4: |
| 90 | case AS3711_STEPUP_CONTROL_5: |
| 91 | case AS3711_REG_STATUS: |
| 92 | case AS3711_INTERRUPT_STATUS_1: |
| 93 | case AS3711_INTERRUPT_STATUS_2: |
| 94 | case AS3711_INTERRUPT_STATUS_3: |
| 95 | case AS3711_CHARGER_STATUS_1: |
| 96 | case AS3711_CHARGER_STATUS_2: |
| 97 | case AS3711_ASIC_ID_1: |
| 98 | case AS3711_ASIC_ID_2: |
| 99 | return true; |
| 100 | } |
| 101 | return false; |
| 102 | } |
| 103 | |
| 104 | static const struct regmap_config as3711_regmap_config = { |
| 105 | .reg_bits = 8, |
| 106 | .val_bits = 8, |
| 107 | .volatile_reg = as3711_volatile_reg, |
| 108 | .readable_reg = as3711_readable_reg, |
| 109 | .precious_reg = as3711_precious_reg, |
| 110 | .max_register = AS3711_MAX_REGS, |
| 111 | .num_reg_defaults_raw = AS3711_MAX_REGS, |
| 112 | .cache_type = REGCACHE_RBTREE, |
| 113 | }; |
| 114 | |
| 115 | static int as3711_i2c_probe(struct i2c_client *client, |
| 116 | const struct i2c_device_id *id) |
| 117 | { |
| 118 | struct as3711 *as3711; |
| 119 | struct as3711_platform_data *pdata = client->dev.platform_data; |
| 120 | unsigned int id1, id2; |
| 121 | int ret; |
| 122 | |
| 123 | if (!pdata) |
| 124 | dev_dbg(&client->dev, "Platform data not found\n"); |
| 125 | |
| 126 | as3711 = devm_kzalloc(&client->dev, sizeof(struct as3711), GFP_KERNEL); |
| 127 | if (!as3711) { |
| 128 | dev_err(&client->dev, "Memory allocation failed\n"); |
| 129 | return -ENOMEM; |
| 130 | } |
| 131 | |
| 132 | as3711->dev = &client->dev; |
| 133 | i2c_set_clientdata(client, as3711); |
| 134 | |
| 135 | if (client->irq) |
| 136 | dev_notice(&client->dev, "IRQ not supported yet\n"); |
| 137 | |
| 138 | as3711->regmap = devm_regmap_init_i2c(client, &as3711_regmap_config); |
| 139 | if (IS_ERR(as3711->regmap)) { |
| 140 | ret = PTR_ERR(as3711->regmap); |
| 141 | dev_err(&client->dev, "regmap initialization failed: %d\n", ret); |
| 142 | return ret; |
| 143 | } |
| 144 | |
| 145 | ret = regmap_read(as3711->regmap, AS3711_ASIC_ID_1, &id1); |
| 146 | if (!ret) |
| 147 | ret = regmap_read(as3711->regmap, AS3711_ASIC_ID_2, &id2); |
| 148 | if (ret < 0) { |
| 149 | dev_err(&client->dev, "regmap_read() failed: %d\n", ret); |
| 150 | return ret; |
| 151 | } |
| 152 | if (id1 != 0x8b) |
| 153 | return -ENODEV; |
| 154 | dev_info(as3711->dev, "AS3711 detected: %x:%x\n", id1, id2); |
| 155 | |
| 156 | /* We can reuse as3711_subdevs[], it will be copied in mfd_add_devices() */ |
| 157 | if (pdata) { |
| 158 | as3711_subdevs[AS3711_REGULATOR].platform_data = &pdata->regulator; |
| 159 | as3711_subdevs[AS3711_REGULATOR].pdata_size = sizeof(pdata->regulator); |
| 160 | as3711_subdevs[AS3711_BACKLIGHT].platform_data = &pdata->backlight; |
| 161 | as3711_subdevs[AS3711_BACKLIGHT].pdata_size = sizeof(pdata->backlight); |
| 162 | } else { |
| 163 | as3711_subdevs[AS3711_REGULATOR].platform_data = NULL; |
| 164 | as3711_subdevs[AS3711_REGULATOR].pdata_size = 0; |
| 165 | as3711_subdevs[AS3711_BACKLIGHT].platform_data = NULL; |
| 166 | as3711_subdevs[AS3711_BACKLIGHT].pdata_size = 0; |
| 167 | } |
| 168 | |
| 169 | ret = mfd_add_devices(as3711->dev, -1, as3711_subdevs, |
| 170 | ARRAY_SIZE(as3711_subdevs), NULL, 0, NULL); |
| 171 | if (ret < 0) |
| 172 | dev_err(&client->dev, "add mfd devices failed: %d\n", ret); |
| 173 | |
| 174 | return ret; |
| 175 | } |
| 176 | |
| 177 | static int as3711_i2c_remove(struct i2c_client *client) |
| 178 | { |
| 179 | struct as3711 *as3711 = i2c_get_clientdata(client); |
| 180 | |
| 181 | mfd_remove_devices(as3711->dev); |
| 182 | return 0; |
| 183 | } |
| 184 | |
| 185 | static const struct i2c_device_id as3711_i2c_id[] = { |
| 186 | {.name = "as3711", .driver_data = 0}, |
| 187 | {} |
| 188 | }; |
| 189 | |
| 190 | MODULE_DEVICE_TABLE(i2c, as3711_i2c_id); |
| 191 | |
| 192 | static struct i2c_driver as3711_i2c_driver = { |
| 193 | .driver = { |
| 194 | .name = "as3711", |
| 195 | .owner = THIS_MODULE, |
| 196 | }, |
| 197 | .probe = as3711_i2c_probe, |
| 198 | .remove = as3711_i2c_remove, |
| 199 | .id_table = as3711_i2c_id, |
| 200 | }; |
| 201 | |
| 202 | static int __init as3711_i2c_init(void) |
| 203 | { |
| 204 | return i2c_add_driver(&as3711_i2c_driver); |
| 205 | } |
| 206 | /* Initialise early */ |
| 207 | subsys_initcall(as3711_i2c_init); |
| 208 | |
| 209 | static void __exit as3711_i2c_exit(void) |
| 210 | { |
| 211 | i2c_del_driver(&as3711_i2c_driver); |
| 212 | } |
| 213 | module_exit(as3711_i2c_exit); |
| 214 | |
| 215 | MODULE_AUTHOR("Guennadi Liakhovetski <g.liakhovetski@gmx.de>"); |
| 216 | MODULE_DESCRIPTION("AS3711 PMIC driver"); |
| 217 | MODULE_LICENSE("GPL v2"); |