Hans Verkuil | 117a55b | 2012-07-18 05:46:46 -0300 | [diff] [blame] | 1 | /* |
| 2 | * Analog Devices AD9389B/AD9889B video encoder driver |
| 3 | * |
| 4 | * Copyright 2012 Cisco Systems, Inc. and/or its affiliates. All rights reserved. |
| 5 | * |
| 6 | * This program is free software; you may redistribute it and/or modify |
| 7 | * it under the terms of the GNU General Public License as published by |
| 8 | * the Free Software Foundation; version 2 of the License. |
| 9 | * |
| 10 | * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, |
| 11 | * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF |
| 12 | * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND |
| 13 | * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT HOLDERS |
| 14 | * BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN AN |
| 15 | * ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN |
| 16 | * CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE |
| 17 | * SOFTWARE. |
| 18 | */ |
| 19 | |
| 20 | /* |
| 21 | * References (c = chapter, p = page): |
| 22 | * REF_01 - Analog Devices, Programming Guide, AD9889B/AD9389B, |
| 23 | * HDMI Transitter, Rev. A, October 2010 |
| 24 | */ |
| 25 | |
| 26 | #include <linux/kernel.h> |
| 27 | #include <linux/module.h> |
| 28 | #include <linux/slab.h> |
| 29 | #include <linux/i2c.h> |
| 30 | #include <linux/delay.h> |
| 31 | #include <linux/videodev2.h> |
| 32 | #include <linux/workqueue.h> |
| 33 | #include <linux/v4l2-dv-timings.h> |
| 34 | #include <media/v4l2-device.h> |
Hans Verkuil | 117a55b | 2012-07-18 05:46:46 -0300 | [diff] [blame] | 35 | #include <media/v4l2-common.h> |
| 36 | #include <media/v4l2-ctrls.h> |
| 37 | #include <media/ad9389b.h> |
| 38 | |
| 39 | static int debug; |
| 40 | module_param(debug, int, 0644); |
| 41 | MODULE_PARM_DESC(debug, "debug level (0-2)"); |
| 42 | |
| 43 | MODULE_DESCRIPTION("Analog Devices AD9389B/AD9889B video encoder driver"); |
| 44 | MODULE_AUTHOR("Hans Verkuil <hans.verkuil@cisco.com>"); |
| 45 | MODULE_AUTHOR("Martin Bugge <marbugge@cisco.com>"); |
| 46 | MODULE_LICENSE("GPL"); |
| 47 | |
| 48 | #define MASK_AD9389B_EDID_RDY_INT 0x04 |
| 49 | #define MASK_AD9389B_MSEN_INT 0x40 |
| 50 | #define MASK_AD9389B_HPD_INT 0x80 |
| 51 | |
| 52 | #define MASK_AD9389B_HPD_DETECT 0x40 |
| 53 | #define MASK_AD9389B_MSEN_DETECT 0x20 |
| 54 | #define MASK_AD9389B_EDID_RDY 0x10 |
| 55 | |
| 56 | #define EDID_MAX_RETRIES (8) |
| 57 | #define EDID_DELAY 250 |
| 58 | #define EDID_MAX_SEGM 8 |
| 59 | |
| 60 | /* |
| 61 | ********************************************************************** |
| 62 | * |
| 63 | * Arrays with configuration parameters for the AD9389B |
| 64 | * |
| 65 | ********************************************************************** |
| 66 | */ |
| 67 | |
| 68 | struct i2c_reg_value { |
| 69 | u8 reg; |
| 70 | u8 value; |
| 71 | }; |
| 72 | |
| 73 | struct ad9389b_state_edid { |
| 74 | /* total number of blocks */ |
| 75 | u32 blocks; |
| 76 | /* Number of segments read */ |
| 77 | u32 segments; |
| 78 | u8 data[EDID_MAX_SEGM * 256]; |
| 79 | /* Number of EDID read retries left */ |
| 80 | unsigned read_retries; |
| 81 | }; |
| 82 | |
| 83 | struct ad9389b_state { |
| 84 | struct ad9389b_platform_data pdata; |
| 85 | struct v4l2_subdev sd; |
| 86 | struct media_pad pad; |
| 87 | struct v4l2_ctrl_handler hdl; |
| 88 | int chip_revision; |
| 89 | /* Is the ad9389b powered on? */ |
| 90 | bool power_on; |
| 91 | /* Did we receive hotplug and rx-sense signals? */ |
| 92 | bool have_monitor; |
| 93 | /* timings from s_dv_timings */ |
| 94 | struct v4l2_dv_timings dv_timings; |
| 95 | /* controls */ |
| 96 | struct v4l2_ctrl *hdmi_mode_ctrl; |
| 97 | struct v4l2_ctrl *hotplug_ctrl; |
| 98 | struct v4l2_ctrl *rx_sense_ctrl; |
| 99 | struct v4l2_ctrl *have_edid0_ctrl; |
| 100 | struct v4l2_ctrl *rgb_quantization_range_ctrl; |
| 101 | struct i2c_client *edid_i2c_client; |
| 102 | struct ad9389b_state_edid edid; |
| 103 | /* Running counter of the number of detected EDIDs (for debugging) */ |
| 104 | unsigned edid_detect_counter; |
| 105 | struct workqueue_struct *work_queue; |
| 106 | struct delayed_work edid_handler; /* work entry */ |
| 107 | }; |
| 108 | |
| 109 | static void ad9389b_check_monitor_present_status(struct v4l2_subdev *sd); |
| 110 | static bool ad9389b_check_edid_status(struct v4l2_subdev *sd); |
| 111 | static void ad9389b_setup(struct v4l2_subdev *sd); |
| 112 | static int ad9389b_s_i2s_clock_freq(struct v4l2_subdev *sd, u32 freq); |
| 113 | static int ad9389b_s_clock_freq(struct v4l2_subdev *sd, u32 freq); |
| 114 | |
| 115 | static inline struct ad9389b_state *get_ad9389b_state(struct v4l2_subdev *sd) |
| 116 | { |
| 117 | return container_of(sd, struct ad9389b_state, sd); |
| 118 | } |
| 119 | |
| 120 | static inline struct v4l2_subdev *to_sd(struct v4l2_ctrl *ctrl) |
| 121 | { |
| 122 | return &container_of(ctrl->handler, struct ad9389b_state, hdl)->sd; |
| 123 | } |
| 124 | |
| 125 | /* ------------------------ I2C ----------------------------------------------- */ |
| 126 | |
| 127 | static int ad9389b_rd(struct v4l2_subdev *sd, u8 reg) |
| 128 | { |
| 129 | struct i2c_client *client = v4l2_get_subdevdata(sd); |
| 130 | |
| 131 | return i2c_smbus_read_byte_data(client, reg); |
| 132 | } |
| 133 | |
| 134 | static int ad9389b_wr(struct v4l2_subdev *sd, u8 reg, u8 val) |
| 135 | { |
| 136 | struct i2c_client *client = v4l2_get_subdevdata(sd); |
| 137 | int ret; |
| 138 | int i; |
| 139 | |
| 140 | for (i = 0; i < 3; i++) { |
| 141 | ret = i2c_smbus_write_byte_data(client, reg, val); |
| 142 | if (ret == 0) |
| 143 | return 0; |
| 144 | } |
| 145 | v4l2_err(sd, "I2C Write Problem\n"); |
| 146 | return ret; |
| 147 | } |
| 148 | |
| 149 | /* To set specific bits in the register, a clear-mask is given (to be AND-ed), |
| 150 | and then the value-mask (to be OR-ed). */ |
| 151 | static inline void ad9389b_wr_and_or(struct v4l2_subdev *sd, u8 reg, |
| 152 | u8 clr_mask, u8 val_mask) |
| 153 | { |
| 154 | ad9389b_wr(sd, reg, (ad9389b_rd(sd, reg) & clr_mask) | val_mask); |
| 155 | } |
| 156 | |
| 157 | static void ad9389b_edid_rd(struct v4l2_subdev *sd, u16 len, u8 *buf) |
| 158 | { |
| 159 | struct ad9389b_state *state = get_ad9389b_state(sd); |
| 160 | int i; |
| 161 | |
| 162 | v4l2_dbg(1, debug, sd, "%s:\n", __func__); |
| 163 | |
| 164 | for (i = 0; i < len; i++) |
| 165 | buf[i] = i2c_smbus_read_byte_data(state->edid_i2c_client, i); |
| 166 | } |
| 167 | |
| 168 | static inline bool ad9389b_have_hotplug(struct v4l2_subdev *sd) |
| 169 | { |
| 170 | return ad9389b_rd(sd, 0x42) & MASK_AD9389B_HPD_DETECT; |
| 171 | } |
| 172 | |
| 173 | static inline bool ad9389b_have_rx_sense(struct v4l2_subdev *sd) |
| 174 | { |
| 175 | return ad9389b_rd(sd, 0x42) & MASK_AD9389B_MSEN_DETECT; |
| 176 | } |
| 177 | |
| 178 | static void ad9389b_csc_conversion_mode(struct v4l2_subdev *sd, u8 mode) |
| 179 | { |
| 180 | ad9389b_wr_and_or(sd, 0x17, 0xe7, (mode & 0x3)<<3); |
| 181 | ad9389b_wr_and_or(sd, 0x18, 0x9f, (mode & 0x3)<<5); |
| 182 | } |
| 183 | |
| 184 | static void ad9389b_csc_coeff(struct v4l2_subdev *sd, |
| 185 | u16 A1, u16 A2, u16 A3, u16 A4, |
| 186 | u16 B1, u16 B2, u16 B3, u16 B4, |
| 187 | u16 C1, u16 C2, u16 C3, u16 C4) |
| 188 | { |
| 189 | /* A */ |
| 190 | ad9389b_wr_and_or(sd, 0x18, 0xe0, A1>>8); |
| 191 | ad9389b_wr(sd, 0x19, A1); |
| 192 | ad9389b_wr_and_or(sd, 0x1A, 0xe0, A2>>8); |
| 193 | ad9389b_wr(sd, 0x1B, A2); |
| 194 | ad9389b_wr_and_or(sd, 0x1c, 0xe0, A3>>8); |
| 195 | ad9389b_wr(sd, 0x1d, A3); |
| 196 | ad9389b_wr_and_or(sd, 0x1e, 0xe0, A4>>8); |
| 197 | ad9389b_wr(sd, 0x1f, A4); |
| 198 | |
| 199 | /* B */ |
| 200 | ad9389b_wr_and_or(sd, 0x20, 0xe0, B1>>8); |
| 201 | ad9389b_wr(sd, 0x21, B1); |
| 202 | ad9389b_wr_and_or(sd, 0x22, 0xe0, B2>>8); |
| 203 | ad9389b_wr(sd, 0x23, B2); |
| 204 | ad9389b_wr_and_or(sd, 0x24, 0xe0, B3>>8); |
| 205 | ad9389b_wr(sd, 0x25, B3); |
| 206 | ad9389b_wr_and_or(sd, 0x26, 0xe0, B4>>8); |
| 207 | ad9389b_wr(sd, 0x27, B4); |
| 208 | |
| 209 | /* C */ |
| 210 | ad9389b_wr_and_or(sd, 0x28, 0xe0, C1>>8); |
| 211 | ad9389b_wr(sd, 0x29, C1); |
| 212 | ad9389b_wr_and_or(sd, 0x2A, 0xe0, C2>>8); |
| 213 | ad9389b_wr(sd, 0x2B, C2); |
| 214 | ad9389b_wr_and_or(sd, 0x2C, 0xe0, C3>>8); |
| 215 | ad9389b_wr(sd, 0x2D, C3); |
| 216 | ad9389b_wr_and_or(sd, 0x2E, 0xe0, C4>>8); |
| 217 | ad9389b_wr(sd, 0x2F, C4); |
| 218 | } |
| 219 | |
| 220 | static void ad9389b_csc_rgb_full2limit(struct v4l2_subdev *sd, bool enable) |
| 221 | { |
| 222 | if (enable) { |
| 223 | u8 csc_mode = 0; |
| 224 | |
| 225 | ad9389b_csc_conversion_mode(sd, csc_mode); |
| 226 | ad9389b_csc_coeff(sd, |
| 227 | 4096-564, 0, 0, 256, |
| 228 | 0, 4096-564, 0, 256, |
| 229 | 0, 0, 4096-564, 256); |
| 230 | /* enable CSC */ |
| 231 | ad9389b_wr_and_or(sd, 0x3b, 0xfe, 0x1); |
| 232 | /* AVI infoframe: Limited range RGB (16-235) */ |
| 233 | ad9389b_wr_and_or(sd, 0xcd, 0xf9, 0x02); |
| 234 | } else { |
| 235 | /* disable CSC */ |
| 236 | ad9389b_wr_and_or(sd, 0x3b, 0xfe, 0x0); |
| 237 | /* AVI infoframe: Full range RGB (0-255) */ |
| 238 | ad9389b_wr_and_or(sd, 0xcd, 0xf9, 0x04); |
| 239 | } |
| 240 | } |
| 241 | |
| 242 | static void ad9389b_set_IT_content_AVI_InfoFrame(struct v4l2_subdev *sd) |
| 243 | { |
| 244 | struct ad9389b_state *state = get_ad9389b_state(sd); |
| 245 | |
| 246 | if (state->dv_timings.bt.standards & V4L2_DV_BT_STD_CEA861) { |
| 247 | /* CEA format, not IT */ |
| 248 | ad9389b_wr_and_or(sd, 0xcd, 0xbf, 0x00); |
| 249 | } else { |
| 250 | /* IT format */ |
| 251 | ad9389b_wr_and_or(sd, 0xcd, 0xbf, 0x40); |
| 252 | } |
| 253 | } |
| 254 | |
| 255 | static int ad9389b_set_rgb_quantization_mode(struct v4l2_subdev *sd, struct v4l2_ctrl *ctrl) |
| 256 | { |
| 257 | struct ad9389b_state *state = get_ad9389b_state(sd); |
| 258 | |
| 259 | switch (ctrl->val) { |
| 260 | case V4L2_DV_RGB_RANGE_AUTO: |
| 261 | /* automatic */ |
| 262 | if (state->dv_timings.bt.standards & V4L2_DV_BT_STD_CEA861) { |
| 263 | /* cea format, RGB limited range (16-235) */ |
| 264 | ad9389b_csc_rgb_full2limit(sd, true); |
| 265 | } else { |
| 266 | /* not cea format, RGB full range (0-255) */ |
| 267 | ad9389b_csc_rgb_full2limit(sd, false); |
| 268 | } |
| 269 | break; |
| 270 | case V4L2_DV_RGB_RANGE_LIMITED: |
| 271 | /* RGB limited range (16-235) */ |
| 272 | ad9389b_csc_rgb_full2limit(sd, true); |
| 273 | break; |
| 274 | case V4L2_DV_RGB_RANGE_FULL: |
| 275 | /* RGB full range (0-255) */ |
| 276 | ad9389b_csc_rgb_full2limit(sd, false); |
| 277 | break; |
| 278 | default: |
| 279 | return -EINVAL; |
| 280 | } |
| 281 | return 0; |
| 282 | } |
| 283 | |
| 284 | static void ad9389b_set_manual_pll_gear(struct v4l2_subdev *sd, u32 pixelclock) |
| 285 | { |
| 286 | u8 gear; |
| 287 | |
| 288 | /* Workaround for TMDS PLL problem |
| 289 | * The TMDS PLL in AD9389b change gear when the chip is heated above a |
| 290 | * certain temperature. The output is disabled when the PLL change gear |
| 291 | * so the monitor has to lock on the signal again. A workaround for |
| 292 | * this is to use the manual PLL gears. This is a solution from Analog |
| 293 | * Devices that is not documented in the datasheets. |
| 294 | * 0x98 [7] = enable manual gearing. 0x98 [6:4] = gear |
| 295 | * |
| 296 | * The pixel frequency ranges are based on readout of the gear the |
| 297 | * automatic gearing selects for different pixel clocks |
| 298 | * (read from 0x9e [3:1]). |
| 299 | */ |
| 300 | |
| 301 | if (pixelclock > 140000000) |
| 302 | gear = 0xc0; /* 4th gear */ |
| 303 | else if (pixelclock > 117000000) |
| 304 | gear = 0xb0; /* 3rd gear */ |
| 305 | else if (pixelclock > 87000000) |
| 306 | gear = 0xa0; /* 2nd gear */ |
| 307 | else if (pixelclock > 60000000) |
| 308 | gear = 0x90; /* 1st gear */ |
| 309 | else |
| 310 | gear = 0x80; /* 0th gear */ |
| 311 | |
| 312 | ad9389b_wr_and_or(sd, 0x98, 0x0f, gear); |
| 313 | } |
| 314 | |
| 315 | /* ------------------------------ CTRL OPS ------------------------------ */ |
| 316 | |
| 317 | static int ad9389b_s_ctrl(struct v4l2_ctrl *ctrl) |
| 318 | { |
| 319 | struct v4l2_subdev *sd = to_sd(ctrl); |
| 320 | struct ad9389b_state *state = get_ad9389b_state(sd); |
| 321 | |
| 322 | v4l2_dbg(1, debug, sd, |
| 323 | "%s: ctrl id: %d, ctrl->val %d\n", __func__, ctrl->id, ctrl->val); |
| 324 | |
| 325 | if (state->hdmi_mode_ctrl == ctrl) { |
| 326 | /* Set HDMI or DVI-D */ |
| 327 | ad9389b_wr_and_or(sd, 0xaf, 0xfd, |
| 328 | ctrl->val == V4L2_DV_TX_MODE_HDMI ? 0x02 : 0x00); |
| 329 | return 0; |
| 330 | } |
| 331 | if (state->rgb_quantization_range_ctrl == ctrl) |
| 332 | return ad9389b_set_rgb_quantization_mode(sd, ctrl); |
| 333 | return -EINVAL; |
| 334 | } |
| 335 | |
| 336 | static const struct v4l2_ctrl_ops ad9389b_ctrl_ops = { |
| 337 | .s_ctrl = ad9389b_s_ctrl, |
| 338 | }; |
| 339 | |
| 340 | /* ---------------------------- CORE OPS ------------------------------------------- */ |
| 341 | |
| 342 | #ifdef CONFIG_VIDEO_ADV_DEBUG |
| 343 | static int ad9389b_g_register(struct v4l2_subdev *sd, struct v4l2_dbg_register *reg) |
| 344 | { |
Hans Verkuil | 117a55b | 2012-07-18 05:46:46 -0300 | [diff] [blame] | 345 | reg->val = ad9389b_rd(sd, reg->reg & 0xff); |
| 346 | reg->size = 1; |
| 347 | return 0; |
| 348 | } |
| 349 | |
Hans Verkuil | 977ba3b | 2013-03-24 08:28:46 -0300 | [diff] [blame] | 350 | static int ad9389b_s_register(struct v4l2_subdev *sd, const struct v4l2_dbg_register *reg) |
Hans Verkuil | 117a55b | 2012-07-18 05:46:46 -0300 | [diff] [blame] | 351 | { |
Hans Verkuil | 117a55b | 2012-07-18 05:46:46 -0300 | [diff] [blame] | 352 | ad9389b_wr(sd, reg->reg & 0xff, reg->val & 0xff); |
| 353 | return 0; |
| 354 | } |
| 355 | #endif |
| 356 | |
Hans Verkuil | 117a55b | 2012-07-18 05:46:46 -0300 | [diff] [blame] | 357 | static int ad9389b_log_status(struct v4l2_subdev *sd) |
| 358 | { |
| 359 | struct ad9389b_state *state = get_ad9389b_state(sd); |
| 360 | struct ad9389b_state_edid *edid = &state->edid; |
| 361 | |
| 362 | static const char * const states[] = { |
| 363 | "in reset", |
| 364 | "reading EDID", |
| 365 | "idle", |
| 366 | "initializing HDCP", |
| 367 | "HDCP enabled", |
| 368 | "initializing HDCP repeater", |
| 369 | "6", "7", "8", "9", "A", "B", "C", "D", "E", "F" |
| 370 | }; |
| 371 | static const char * const errors[] = { |
| 372 | "no error", |
| 373 | "bad receiver BKSV", |
| 374 | "Ri mismatch", |
| 375 | "Pj mismatch", |
| 376 | "i2c error", |
| 377 | "timed out", |
| 378 | "max repeater cascade exceeded", |
| 379 | "hash check failed", |
| 380 | "too many devices", |
| 381 | "9", "A", "B", "C", "D", "E", "F" |
| 382 | }; |
| 383 | |
| 384 | u8 manual_gear; |
| 385 | |
| 386 | v4l2_info(sd, "chip revision %d\n", state->chip_revision); |
| 387 | v4l2_info(sd, "power %s\n", state->power_on ? "on" : "off"); |
| 388 | v4l2_info(sd, "%s hotplug, %s Rx Sense, %s EDID (%d block(s))\n", |
| 389 | (ad9389b_rd(sd, 0x42) & MASK_AD9389B_HPD_DETECT) ? |
| 390 | "detected" : "no", |
| 391 | (ad9389b_rd(sd, 0x42) & MASK_AD9389B_MSEN_DETECT) ? |
| 392 | "detected" : "no", |
| 393 | edid->segments ? "found" : "no", edid->blocks); |
| 394 | if (state->have_monitor) { |
| 395 | v4l2_info(sd, "%s output %s\n", |
| 396 | (ad9389b_rd(sd, 0xaf) & 0x02) ? |
| 397 | "HDMI" : "DVI-D", |
| 398 | (ad9389b_rd(sd, 0xa1) & 0x3c) ? |
| 399 | "disabled" : "enabled"); |
| 400 | } |
| 401 | v4l2_info(sd, "ad9389b: %s\n", (ad9389b_rd(sd, 0xb8) & 0x40) ? |
| 402 | "encrypted" : "no encryption"); |
| 403 | v4l2_info(sd, "state: %s, error: %s, detect count: %u, msk/irq: %02x/%02x\n", |
| 404 | states[ad9389b_rd(sd, 0xc8) & 0xf], |
| 405 | errors[ad9389b_rd(sd, 0xc8) >> 4], |
| 406 | state->edid_detect_counter, |
| 407 | ad9389b_rd(sd, 0x94), ad9389b_rd(sd, 0x96)); |
| 408 | manual_gear = ad9389b_rd(sd, 0x98) & 0x80; |
| 409 | v4l2_info(sd, "ad9389b: RGB quantization: %s range\n", |
| 410 | ad9389b_rd(sd, 0x3b) & 0x01 ? "limited" : "full"); |
| 411 | v4l2_info(sd, "ad9389b: %s gear %d\n", |
| 412 | manual_gear ? "manual" : "automatic", |
| 413 | manual_gear ? ((ad9389b_rd(sd, 0x98) & 0x70) >> 4) : |
| 414 | ((ad9389b_rd(sd, 0x9e) & 0x0e) >> 1)); |
| 415 | if (state->have_monitor) { |
| 416 | if (ad9389b_rd(sd, 0xaf) & 0x02) { |
| 417 | /* HDMI only */ |
| 418 | u8 manual_cts = ad9389b_rd(sd, 0x0a) & 0x80; |
| 419 | u32 N = (ad9389b_rd(sd, 0x01) & 0xf) << 16 | |
| 420 | ad9389b_rd(sd, 0x02) << 8 | |
| 421 | ad9389b_rd(sd, 0x03); |
| 422 | u8 vic_detect = ad9389b_rd(sd, 0x3e) >> 2; |
| 423 | u8 vic_sent = ad9389b_rd(sd, 0x3d) & 0x3f; |
| 424 | u32 CTS; |
| 425 | |
| 426 | if (manual_cts) |
| 427 | CTS = (ad9389b_rd(sd, 0x07) & 0xf) << 16 | |
| 428 | ad9389b_rd(sd, 0x08) << 8 | |
| 429 | ad9389b_rd(sd, 0x09); |
| 430 | else |
| 431 | CTS = (ad9389b_rd(sd, 0x04) & 0xf) << 16 | |
| 432 | ad9389b_rd(sd, 0x05) << 8 | |
| 433 | ad9389b_rd(sd, 0x06); |
| 434 | N = (ad9389b_rd(sd, 0x01) & 0xf) << 16 | |
| 435 | ad9389b_rd(sd, 0x02) << 8 | |
| 436 | ad9389b_rd(sd, 0x03); |
| 437 | |
| 438 | v4l2_info(sd, "ad9389b: CTS %s mode: N %d, CTS %d\n", |
| 439 | manual_cts ? "manual" : "automatic", N, CTS); |
| 440 | |
| 441 | v4l2_info(sd, "ad9389b: VIC: detected %d, sent %d\n", |
| 442 | vic_detect, vic_sent); |
| 443 | } |
| 444 | } |
| 445 | if (state->dv_timings.type == V4L2_DV_BT_656_1120) { |
| 446 | struct v4l2_bt_timings *bt = bt = &state->dv_timings.bt; |
| 447 | u32 frame_width = bt->width + bt->hfrontporch + |
| 448 | bt->hsync + bt->hbackporch; |
| 449 | u32 frame_height = bt->height + bt->vfrontporch + |
| 450 | bt->vsync + bt->vbackporch; |
| 451 | u32 frame_size = frame_width * frame_height; |
| 452 | |
| 453 | v4l2_info(sd, "timings: %ux%u%s%u (%ux%u). Pix freq. = %u Hz. Polarities = 0x%x\n", |
| 454 | bt->width, bt->height, bt->interlaced ? "i" : "p", |
| 455 | frame_size > 0 ? (unsigned)bt->pixelclock / frame_size : 0, |
| 456 | frame_width, frame_height, |
| 457 | (unsigned)bt->pixelclock, bt->polarities); |
| 458 | } else { |
| 459 | v4l2_info(sd, "no timings set\n"); |
| 460 | } |
| 461 | return 0; |
| 462 | } |
| 463 | |
| 464 | /* Power up/down ad9389b */ |
| 465 | static int ad9389b_s_power(struct v4l2_subdev *sd, int on) |
| 466 | { |
| 467 | struct ad9389b_state *state = get_ad9389b_state(sd); |
| 468 | struct ad9389b_platform_data *pdata = &state->pdata; |
| 469 | const int retries = 20; |
| 470 | int i; |
| 471 | |
| 472 | v4l2_dbg(1, debug, sd, "%s: power %s\n", __func__, on ? "on" : "off"); |
| 473 | |
| 474 | state->power_on = on; |
| 475 | |
| 476 | if (!on) { |
| 477 | /* Power down */ |
| 478 | ad9389b_wr_and_or(sd, 0x41, 0xbf, 0x40); |
| 479 | return true; |
| 480 | } |
| 481 | |
| 482 | /* Power up */ |
| 483 | /* The ad9389b does not always come up immediately. |
| 484 | Retry multiple times. */ |
| 485 | for (i = 0; i < retries; i++) { |
| 486 | ad9389b_wr_and_or(sd, 0x41, 0xbf, 0x0); |
| 487 | if ((ad9389b_rd(sd, 0x41) & 0x40) == 0) |
| 488 | break; |
| 489 | ad9389b_wr_and_or(sd, 0x41, 0xbf, 0x40); |
| 490 | msleep(10); |
| 491 | } |
| 492 | if (i == retries) { |
| 493 | v4l2_dbg(1, debug, sd, "failed to powerup the ad9389b\n"); |
| 494 | ad9389b_s_power(sd, 0); |
| 495 | return false; |
| 496 | } |
| 497 | if (i > 1) |
| 498 | v4l2_dbg(1, debug, sd, |
| 499 | "needed %d retries to powerup the ad9389b\n", i); |
| 500 | |
| 501 | /* Select chip: AD9389B */ |
| 502 | ad9389b_wr_and_or(sd, 0xba, 0xef, 0x10); |
| 503 | |
| 504 | /* Reserved registers that must be set according to REF_01 p. 11*/ |
| 505 | ad9389b_wr_and_or(sd, 0x98, 0xf0, 0x07); |
| 506 | ad9389b_wr(sd, 0x9c, 0x38); |
| 507 | ad9389b_wr_and_or(sd, 0x9d, 0xfc, 0x01); |
| 508 | |
| 509 | /* Differential output drive strength */ |
| 510 | if (pdata->diff_data_drive_strength > 0) |
| 511 | ad9389b_wr(sd, 0xa2, pdata->diff_data_drive_strength); |
| 512 | else |
| 513 | ad9389b_wr(sd, 0xa2, 0x87); |
| 514 | |
| 515 | if (pdata->diff_clk_drive_strength > 0) |
| 516 | ad9389b_wr(sd, 0xa3, pdata->diff_clk_drive_strength); |
| 517 | else |
| 518 | ad9389b_wr(sd, 0xa3, 0x87); |
| 519 | |
| 520 | ad9389b_wr(sd, 0x0a, 0x01); |
| 521 | ad9389b_wr(sd, 0xbb, 0xff); |
| 522 | |
| 523 | /* Set number of attempts to read the EDID */ |
| 524 | ad9389b_wr(sd, 0xc9, 0xf); |
| 525 | return true; |
| 526 | } |
| 527 | |
| 528 | /* Enable interrupts */ |
| 529 | static void ad9389b_set_isr(struct v4l2_subdev *sd, bool enable) |
| 530 | { |
| 531 | u8 irqs = MASK_AD9389B_HPD_INT | MASK_AD9389B_MSEN_INT; |
| 532 | u8 irqs_rd; |
| 533 | int retries = 100; |
| 534 | |
| 535 | /* The datasheet says that the EDID ready interrupt should be |
| 536 | disabled if there is no hotplug. */ |
| 537 | if (!enable) |
| 538 | irqs = 0; |
| 539 | else if (ad9389b_have_hotplug(sd)) |
| 540 | irqs |= MASK_AD9389B_EDID_RDY_INT; |
| 541 | |
| 542 | /* |
| 543 | * This i2c write can fail (approx. 1 in 1000 writes). But it |
| 544 | * is essential that this register is correct, so retry it |
| 545 | * multiple times. |
| 546 | * |
| 547 | * Note that the i2c write does not report an error, but the readback |
| 548 | * clearly shows the wrong value. |
| 549 | */ |
| 550 | do { |
| 551 | ad9389b_wr(sd, 0x94, irqs); |
| 552 | irqs_rd = ad9389b_rd(sd, 0x94); |
| 553 | } while (retries-- && irqs_rd != irqs); |
| 554 | |
| 555 | if (irqs_rd != irqs) |
| 556 | v4l2_err(sd, "Could not set interrupts: hw failure?\n"); |
| 557 | } |
| 558 | |
| 559 | /* Interrupt handler */ |
| 560 | static int ad9389b_isr(struct v4l2_subdev *sd, u32 status, bool *handled) |
| 561 | { |
| 562 | u8 irq_status; |
| 563 | |
| 564 | /* disable interrupts to prevent a race condition */ |
| 565 | ad9389b_set_isr(sd, false); |
| 566 | irq_status = ad9389b_rd(sd, 0x96); |
| 567 | /* clear detected interrupts */ |
| 568 | ad9389b_wr(sd, 0x96, irq_status); |
| 569 | |
| 570 | if (irq_status & (MASK_AD9389B_HPD_INT | MASK_AD9389B_MSEN_INT)) |
| 571 | ad9389b_check_monitor_present_status(sd); |
| 572 | if (irq_status & MASK_AD9389B_EDID_RDY_INT) |
| 573 | ad9389b_check_edid_status(sd); |
| 574 | |
| 575 | /* enable interrupts */ |
| 576 | ad9389b_set_isr(sd, true); |
| 577 | *handled = true; |
| 578 | return 0; |
| 579 | } |
| 580 | |
| 581 | static const struct v4l2_subdev_core_ops ad9389b_core_ops = { |
| 582 | .log_status = ad9389b_log_status, |
Hans Verkuil | 117a55b | 2012-07-18 05:46:46 -0300 | [diff] [blame] | 583 | #ifdef CONFIG_VIDEO_ADV_DEBUG |
| 584 | .g_register = ad9389b_g_register, |
| 585 | .s_register = ad9389b_s_register, |
| 586 | #endif |
| 587 | .s_power = ad9389b_s_power, |
| 588 | .interrupt_service_routine = ad9389b_isr, |
| 589 | }; |
| 590 | |
| 591 | /* ------------------------------ PAD OPS ------------------------------ */ |
| 592 | |
| 593 | static int ad9389b_get_edid(struct v4l2_subdev *sd, struct v4l2_subdev_edid *edid) |
| 594 | { |
| 595 | struct ad9389b_state *state = get_ad9389b_state(sd); |
| 596 | |
| 597 | if (edid->pad != 0) |
| 598 | return -EINVAL; |
| 599 | if (edid->blocks == 0 || edid->blocks > 256) |
| 600 | return -EINVAL; |
| 601 | if (!edid->edid) |
| 602 | return -EINVAL; |
| 603 | if (!state->edid.segments) { |
| 604 | v4l2_dbg(1, debug, sd, "EDID segment 0 not found\n"); |
| 605 | return -ENODATA; |
| 606 | } |
| 607 | if (edid->start_block >= state->edid.segments * 2) |
| 608 | return -E2BIG; |
| 609 | if (edid->blocks + edid->start_block >= state->edid.segments * 2) |
| 610 | edid->blocks = state->edid.segments * 2 - edid->start_block; |
| 611 | memcpy(edid->edid, &state->edid.data[edid->start_block * 128], |
| 612 | 128 * edid->blocks); |
| 613 | return 0; |
| 614 | } |
| 615 | |
| 616 | static const struct v4l2_subdev_pad_ops ad9389b_pad_ops = { |
| 617 | .get_edid = ad9389b_get_edid, |
| 618 | }; |
| 619 | |
| 620 | /* ------------------------------ VIDEO OPS ------------------------------ */ |
| 621 | |
| 622 | /* Enable/disable ad9389b output */ |
| 623 | static int ad9389b_s_stream(struct v4l2_subdev *sd, int enable) |
| 624 | { |
| 625 | struct ad9389b_state *state = get_ad9389b_state(sd); |
| 626 | |
| 627 | v4l2_dbg(1, debug, sd, "%s: %sable\n", __func__, (enable ? "en" : "dis")); |
| 628 | |
| 629 | ad9389b_wr_and_or(sd, 0xa1, ~0x3c, (enable ? 0 : 0x3c)); |
| 630 | if (enable) { |
| 631 | ad9389b_check_monitor_present_status(sd); |
| 632 | } else { |
| 633 | ad9389b_s_power(sd, 0); |
| 634 | state->have_monitor = false; |
| 635 | } |
| 636 | return 0; |
| 637 | } |
| 638 | |
| 639 | static const struct v4l2_dv_timings ad9389b_timings[] = { |
| 640 | V4L2_DV_BT_CEA_720X480P59_94, |
| 641 | V4L2_DV_BT_CEA_720X576P50, |
| 642 | V4L2_DV_BT_CEA_1280X720P24, |
| 643 | V4L2_DV_BT_CEA_1280X720P25, |
| 644 | V4L2_DV_BT_CEA_1280X720P30, |
| 645 | V4L2_DV_BT_CEA_1280X720P50, |
| 646 | V4L2_DV_BT_CEA_1280X720P60, |
| 647 | V4L2_DV_BT_CEA_1920X1080P24, |
| 648 | V4L2_DV_BT_CEA_1920X1080P25, |
| 649 | V4L2_DV_BT_CEA_1920X1080P30, |
| 650 | V4L2_DV_BT_CEA_1920X1080P50, |
| 651 | V4L2_DV_BT_CEA_1920X1080P60, |
| 652 | |
| 653 | V4L2_DV_BT_DMT_640X350P85, |
| 654 | V4L2_DV_BT_DMT_640X400P85, |
| 655 | V4L2_DV_BT_DMT_720X400P85, |
| 656 | V4L2_DV_BT_DMT_640X480P60, |
| 657 | V4L2_DV_BT_DMT_640X480P72, |
| 658 | V4L2_DV_BT_DMT_640X480P75, |
| 659 | V4L2_DV_BT_DMT_640X480P85, |
| 660 | V4L2_DV_BT_DMT_800X600P56, |
| 661 | V4L2_DV_BT_DMT_800X600P60, |
| 662 | V4L2_DV_BT_DMT_800X600P72, |
| 663 | V4L2_DV_BT_DMT_800X600P75, |
| 664 | V4L2_DV_BT_DMT_800X600P85, |
| 665 | V4L2_DV_BT_DMT_848X480P60, |
| 666 | V4L2_DV_BT_DMT_1024X768P60, |
| 667 | V4L2_DV_BT_DMT_1024X768P70, |
| 668 | V4L2_DV_BT_DMT_1024X768P75, |
| 669 | V4L2_DV_BT_DMT_1024X768P85, |
| 670 | V4L2_DV_BT_DMT_1152X864P75, |
| 671 | V4L2_DV_BT_DMT_1280X768P60_RB, |
| 672 | V4L2_DV_BT_DMT_1280X768P60, |
| 673 | V4L2_DV_BT_DMT_1280X768P75, |
| 674 | V4L2_DV_BT_DMT_1280X768P85, |
| 675 | V4L2_DV_BT_DMT_1280X800P60_RB, |
| 676 | V4L2_DV_BT_DMT_1280X800P60, |
| 677 | V4L2_DV_BT_DMT_1280X800P75, |
| 678 | V4L2_DV_BT_DMT_1280X800P85, |
| 679 | V4L2_DV_BT_DMT_1280X960P60, |
| 680 | V4L2_DV_BT_DMT_1280X960P85, |
| 681 | V4L2_DV_BT_DMT_1280X1024P60, |
| 682 | V4L2_DV_BT_DMT_1280X1024P75, |
| 683 | V4L2_DV_BT_DMT_1280X1024P85, |
| 684 | V4L2_DV_BT_DMT_1360X768P60, |
| 685 | V4L2_DV_BT_DMT_1400X1050P60_RB, |
| 686 | V4L2_DV_BT_DMT_1400X1050P60, |
| 687 | V4L2_DV_BT_DMT_1400X1050P75, |
| 688 | V4L2_DV_BT_DMT_1400X1050P85, |
| 689 | V4L2_DV_BT_DMT_1440X900P60_RB, |
| 690 | V4L2_DV_BT_DMT_1440X900P60, |
| 691 | V4L2_DV_BT_DMT_1600X1200P60, |
| 692 | V4L2_DV_BT_DMT_1680X1050P60_RB, |
| 693 | V4L2_DV_BT_DMT_1680X1050P60, |
| 694 | V4L2_DV_BT_DMT_1792X1344P60, |
| 695 | V4L2_DV_BT_DMT_1856X1392P60, |
| 696 | V4L2_DV_BT_DMT_1920X1200P60_RB, |
| 697 | V4L2_DV_BT_DMT_1366X768P60, |
| 698 | V4L2_DV_BT_DMT_1920X1080P60, |
| 699 | {}, |
| 700 | }; |
| 701 | |
| 702 | static int ad9389b_s_dv_timings(struct v4l2_subdev *sd, |
| 703 | struct v4l2_dv_timings *timings) |
| 704 | { |
| 705 | struct ad9389b_state *state = get_ad9389b_state(sd); |
| 706 | int i; |
| 707 | |
| 708 | v4l2_dbg(1, debug, sd, "%s:\n", __func__); |
| 709 | |
| 710 | /* quick sanity check */ |
| 711 | if (timings->type != V4L2_DV_BT_656_1120) |
| 712 | return -EINVAL; |
| 713 | |
| 714 | if (timings->bt.interlaced) |
| 715 | return -EINVAL; |
| 716 | if (timings->bt.pixelclock < 27000000 || |
| 717 | timings->bt.pixelclock > 170000000) |
| 718 | return -EINVAL; |
| 719 | |
| 720 | /* Fill the optional fields .standards and .flags in struct v4l2_dv_timings |
| 721 | if the format is listed in ad9389b_timings[] */ |
| 722 | for (i = 0; ad9389b_timings[i].bt.width; i++) { |
| 723 | if (v4l_match_dv_timings(timings, &ad9389b_timings[i], 0)) { |
| 724 | *timings = ad9389b_timings[i]; |
| 725 | break; |
| 726 | } |
| 727 | } |
| 728 | |
| 729 | timings->bt.flags &= ~V4L2_DV_FL_REDUCED_FPS; |
| 730 | |
| 731 | /* save timings */ |
| 732 | state->dv_timings = *timings; |
| 733 | |
| 734 | /* update quantization range based on new dv_timings */ |
| 735 | ad9389b_set_rgb_quantization_mode(sd, state->rgb_quantization_range_ctrl); |
| 736 | |
| 737 | /* update PLL gear based on new dv_timings */ |
| 738 | if (state->pdata.tmds_pll_gear == AD9389B_TMDS_PLL_GEAR_SEMI_AUTOMATIC) |
| 739 | ad9389b_set_manual_pll_gear(sd, (u32)timings->bt.pixelclock); |
| 740 | |
| 741 | /* update AVI infoframe */ |
| 742 | ad9389b_set_IT_content_AVI_InfoFrame(sd); |
| 743 | |
| 744 | return 0; |
| 745 | } |
| 746 | |
| 747 | static int ad9389b_g_dv_timings(struct v4l2_subdev *sd, |
| 748 | struct v4l2_dv_timings *timings) |
| 749 | { |
| 750 | struct ad9389b_state *state = get_ad9389b_state(sd); |
| 751 | |
| 752 | v4l2_dbg(1, debug, sd, "%s:\n", __func__); |
| 753 | |
| 754 | if (!timings) |
| 755 | return -EINVAL; |
| 756 | |
| 757 | *timings = state->dv_timings; |
| 758 | |
| 759 | return 0; |
| 760 | } |
| 761 | |
| 762 | static int ad9389b_enum_dv_timings(struct v4l2_subdev *sd, |
| 763 | struct v4l2_enum_dv_timings *timings) |
| 764 | { |
| 765 | if (timings->index >= ARRAY_SIZE(ad9389b_timings)) |
| 766 | return -EINVAL; |
| 767 | |
| 768 | memset(timings->reserved, 0, sizeof(timings->reserved)); |
| 769 | timings->timings = ad9389b_timings[timings->index]; |
| 770 | return 0; |
| 771 | } |
| 772 | |
| 773 | static int ad9389b_dv_timings_cap(struct v4l2_subdev *sd, |
| 774 | struct v4l2_dv_timings_cap *cap) |
| 775 | { |
| 776 | cap->type = V4L2_DV_BT_656_1120; |
| 777 | cap->bt.max_width = 1920; |
| 778 | cap->bt.max_height = 1200; |
| 779 | cap->bt.min_pixelclock = 27000000; |
| 780 | cap->bt.max_pixelclock = 170000000; |
| 781 | cap->bt.standards = V4L2_DV_BT_STD_CEA861 | V4L2_DV_BT_STD_DMT | |
| 782 | V4L2_DV_BT_STD_GTF | V4L2_DV_BT_STD_CVT; |
| 783 | cap->bt.capabilities = V4L2_DV_BT_CAP_PROGRESSIVE | |
| 784 | V4L2_DV_BT_CAP_REDUCED_BLANKING | V4L2_DV_BT_CAP_CUSTOM; |
| 785 | return 0; |
| 786 | } |
| 787 | |
| 788 | static const struct v4l2_subdev_video_ops ad9389b_video_ops = { |
| 789 | .s_stream = ad9389b_s_stream, |
| 790 | .s_dv_timings = ad9389b_s_dv_timings, |
| 791 | .g_dv_timings = ad9389b_g_dv_timings, |
| 792 | .enum_dv_timings = ad9389b_enum_dv_timings, |
| 793 | .dv_timings_cap = ad9389b_dv_timings_cap, |
| 794 | }; |
| 795 | |
| 796 | static int ad9389b_s_audio_stream(struct v4l2_subdev *sd, int enable) |
| 797 | { |
| 798 | v4l2_dbg(1, debug, sd, "%s: %sable\n", __func__, (enable ? "en" : "dis")); |
| 799 | |
| 800 | if (enable) |
| 801 | ad9389b_wr_and_or(sd, 0x45, 0x3f, 0x80); |
| 802 | else |
| 803 | ad9389b_wr_and_or(sd, 0x45, 0x3f, 0x40); |
| 804 | |
| 805 | return 0; |
| 806 | } |
| 807 | |
| 808 | static int ad9389b_s_clock_freq(struct v4l2_subdev *sd, u32 freq) |
| 809 | { |
| 810 | u32 N; |
| 811 | |
| 812 | switch (freq) { |
| 813 | case 32000: N = 4096; break; |
| 814 | case 44100: N = 6272; break; |
| 815 | case 48000: N = 6144; break; |
| 816 | case 88200: N = 12544; break; |
| 817 | case 96000: N = 12288; break; |
| 818 | case 176400: N = 25088; break; |
| 819 | case 192000: N = 24576; break; |
| 820 | default: |
| 821 | return -EINVAL; |
| 822 | } |
| 823 | |
| 824 | /* Set N (used with CTS to regenerate the audio clock) */ |
| 825 | ad9389b_wr(sd, 0x01, (N >> 16) & 0xf); |
| 826 | ad9389b_wr(sd, 0x02, (N >> 8) & 0xff); |
| 827 | ad9389b_wr(sd, 0x03, N & 0xff); |
| 828 | |
| 829 | return 0; |
| 830 | } |
| 831 | |
| 832 | static int ad9389b_s_i2s_clock_freq(struct v4l2_subdev *sd, u32 freq) |
| 833 | { |
| 834 | u32 i2s_sf; |
| 835 | |
| 836 | switch (freq) { |
| 837 | case 32000: i2s_sf = 0x30; break; |
| 838 | case 44100: i2s_sf = 0x00; break; |
| 839 | case 48000: i2s_sf = 0x20; break; |
| 840 | case 88200: i2s_sf = 0x80; break; |
| 841 | case 96000: i2s_sf = 0xa0; break; |
| 842 | case 176400: i2s_sf = 0xc0; break; |
| 843 | case 192000: i2s_sf = 0xe0; break; |
| 844 | default: |
| 845 | return -EINVAL; |
| 846 | } |
| 847 | |
| 848 | /* Set sampling frequency for I2S audio to 48 kHz */ |
| 849 | ad9389b_wr_and_or(sd, 0x15, 0xf, i2s_sf); |
| 850 | |
| 851 | return 0; |
| 852 | } |
| 853 | |
| 854 | static int ad9389b_s_routing(struct v4l2_subdev *sd, u32 input, u32 output, u32 config) |
| 855 | { |
| 856 | /* TODO based on input/output/config */ |
| 857 | /* TODO See datasheet "Programmers guide" p. 39-40 */ |
| 858 | |
| 859 | /* Only 2 channels in use for application */ |
| 860 | ad9389b_wr_and_or(sd, 0x50, 0x1f, 0x20); |
| 861 | /* Speaker mapping */ |
| 862 | ad9389b_wr(sd, 0x51, 0x00); |
| 863 | |
| 864 | /* TODO Where should this be placed? */ |
| 865 | /* 16 bit audio word length */ |
| 866 | ad9389b_wr_and_or(sd, 0x14, 0xf0, 0x02); |
| 867 | |
| 868 | return 0; |
| 869 | } |
| 870 | |
| 871 | static const struct v4l2_subdev_audio_ops ad9389b_audio_ops = { |
| 872 | .s_stream = ad9389b_s_audio_stream, |
| 873 | .s_clock_freq = ad9389b_s_clock_freq, |
| 874 | .s_i2s_clock_freq = ad9389b_s_i2s_clock_freq, |
| 875 | .s_routing = ad9389b_s_routing, |
| 876 | }; |
| 877 | |
| 878 | /* --------------------- SUBDEV OPS --------------------------------------- */ |
| 879 | |
| 880 | static const struct v4l2_subdev_ops ad9389b_ops = { |
| 881 | .core = &ad9389b_core_ops, |
| 882 | .video = &ad9389b_video_ops, |
| 883 | .audio = &ad9389b_audio_ops, |
| 884 | .pad = &ad9389b_pad_ops, |
| 885 | }; |
| 886 | |
| 887 | /* ----------------------------------------------------------------------- */ |
| 888 | static void ad9389b_dbg_dump_edid(int lvl, int debug, struct v4l2_subdev *sd, |
| 889 | int segment, u8 *buf) |
| 890 | { |
| 891 | int i, j; |
| 892 | |
| 893 | if (debug < lvl) |
| 894 | return; |
| 895 | |
| 896 | v4l2_dbg(lvl, debug, sd, "edid segment %d\n", segment); |
| 897 | for (i = 0; i < 256; i += 16) { |
| 898 | u8 b[128]; |
| 899 | u8 *bp = b; |
| 900 | |
| 901 | if (i == 128) |
| 902 | v4l2_dbg(lvl, debug, sd, "\n"); |
| 903 | for (j = i; j < i + 16; j++) { |
| 904 | sprintf(bp, "0x%02x, ", buf[j]); |
| 905 | bp += 6; |
| 906 | } |
| 907 | bp[0] = '\0'; |
| 908 | v4l2_dbg(lvl, debug, sd, "%s\n", b); |
| 909 | } |
| 910 | } |
| 911 | |
| 912 | static void ad9389b_edid_handler(struct work_struct *work) |
| 913 | { |
| 914 | struct delayed_work *dwork = to_delayed_work(work); |
| 915 | struct ad9389b_state *state = container_of(dwork, |
| 916 | struct ad9389b_state, edid_handler); |
| 917 | struct v4l2_subdev *sd = &state->sd; |
| 918 | struct ad9389b_edid_detect ed; |
| 919 | |
| 920 | v4l2_dbg(1, debug, sd, "%s:\n", __func__); |
| 921 | |
| 922 | if (ad9389b_check_edid_status(sd)) { |
| 923 | /* Return if we received the EDID. */ |
| 924 | return; |
| 925 | } |
| 926 | |
| 927 | if (ad9389b_have_hotplug(sd)) { |
| 928 | /* We must retry reading the EDID several times, it is possible |
| 929 | * that initially the EDID couldn't be read due to i2c errors |
| 930 | * (DVI connectors are particularly prone to this problem). */ |
| 931 | if (state->edid.read_retries) { |
| 932 | state->edid.read_retries--; |
| 933 | /* EDID read failed, trigger a retry */ |
| 934 | ad9389b_wr(sd, 0xc9, 0xf); |
| 935 | queue_delayed_work(state->work_queue, |
| 936 | &state->edid_handler, EDID_DELAY); |
| 937 | return; |
| 938 | } |
| 939 | } |
| 940 | |
| 941 | /* We failed to read the EDID, so send an event for this. */ |
| 942 | ed.present = false; |
| 943 | ed.segment = ad9389b_rd(sd, 0xc4); |
| 944 | v4l2_subdev_notify(sd, AD9389B_EDID_DETECT, (void *)&ed); |
| 945 | v4l2_dbg(1, debug, sd, "%s: no edid found\n", __func__); |
| 946 | } |
| 947 | |
| 948 | static void ad9389b_audio_setup(struct v4l2_subdev *sd) |
| 949 | { |
| 950 | v4l2_dbg(1, debug, sd, "%s\n", __func__); |
| 951 | |
| 952 | ad9389b_s_i2s_clock_freq(sd, 48000); |
| 953 | ad9389b_s_clock_freq(sd, 48000); |
| 954 | ad9389b_s_routing(sd, 0, 0, 0); |
| 955 | } |
| 956 | |
| 957 | /* Initial setup of AD9389b */ |
| 958 | |
| 959 | /* Configure hdmi transmitter. */ |
| 960 | static void ad9389b_setup(struct v4l2_subdev *sd) |
| 961 | { |
| 962 | struct ad9389b_state *state = get_ad9389b_state(sd); |
| 963 | |
| 964 | v4l2_dbg(1, debug, sd, "%s\n", __func__); |
| 965 | |
| 966 | /* Input format: RGB 4:4:4 */ |
| 967 | ad9389b_wr_and_or(sd, 0x15, 0xf1, 0x0); |
| 968 | /* Output format: RGB 4:4:4 */ |
| 969 | ad9389b_wr_and_or(sd, 0x16, 0x3f, 0x0); |
| 970 | /* CSC fixed point: +/-2, 1st order interpolation 4:2:2 -> 4:4:4 up |
| 971 | conversion, Aspect ratio: 16:9 */ |
| 972 | ad9389b_wr_and_or(sd, 0x17, 0xe1, 0x0e); |
| 973 | /* Disable pixel repetition and CSC */ |
| 974 | ad9389b_wr_and_or(sd, 0x3b, 0x9e, 0x0); |
| 975 | /* Output format: RGB 4:4:4, Active Format Information is valid. */ |
| 976 | ad9389b_wr_and_or(sd, 0x45, 0xc7, 0x08); |
| 977 | /* Underscanned */ |
| 978 | ad9389b_wr_and_or(sd, 0x46, 0x3f, 0x80); |
| 979 | /* Setup video format */ |
| 980 | ad9389b_wr(sd, 0x3c, 0x0); |
| 981 | /* Active format aspect ratio: same as picure. */ |
| 982 | ad9389b_wr(sd, 0x47, 0x80); |
| 983 | /* No encryption */ |
| 984 | ad9389b_wr_and_or(sd, 0xaf, 0xef, 0x0); |
| 985 | /* Positive clk edge capture for input video clock */ |
| 986 | ad9389b_wr_and_or(sd, 0xba, 0x1f, 0x60); |
| 987 | |
| 988 | ad9389b_audio_setup(sd); |
| 989 | |
| 990 | v4l2_ctrl_handler_setup(&state->hdl); |
| 991 | |
| 992 | ad9389b_set_IT_content_AVI_InfoFrame(sd); |
| 993 | } |
| 994 | |
| 995 | static void ad9389b_notify_monitor_detect(struct v4l2_subdev *sd) |
| 996 | { |
| 997 | struct ad9389b_monitor_detect mdt; |
| 998 | struct ad9389b_state *state = get_ad9389b_state(sd); |
| 999 | |
| 1000 | mdt.present = state->have_monitor; |
| 1001 | v4l2_subdev_notify(sd, AD9389B_MONITOR_DETECT, (void *)&mdt); |
| 1002 | } |
| 1003 | |
| 1004 | static void ad9389b_check_monitor_present_status(struct v4l2_subdev *sd) |
| 1005 | { |
| 1006 | struct ad9389b_state *state = get_ad9389b_state(sd); |
| 1007 | /* read hotplug and rx-sense state */ |
| 1008 | u8 status = ad9389b_rd(sd, 0x42); |
| 1009 | |
| 1010 | v4l2_dbg(1, debug, sd, "%s: status: 0x%x%s%s\n", |
| 1011 | __func__, |
| 1012 | status, |
| 1013 | status & MASK_AD9389B_HPD_DETECT ? ", hotplug" : "", |
| 1014 | status & MASK_AD9389B_MSEN_DETECT ? ", rx-sense" : ""); |
| 1015 | |
| 1016 | if ((status & MASK_AD9389B_HPD_DETECT) && |
| 1017 | ((status & MASK_AD9389B_MSEN_DETECT) || state->edid.segments)) { |
| 1018 | v4l2_dbg(1, debug, sd, |
| 1019 | "%s: hotplug and (rx-sense or edid)\n", __func__); |
| 1020 | if (!state->have_monitor) { |
| 1021 | v4l2_dbg(1, debug, sd, "%s: monitor detected\n", __func__); |
| 1022 | state->have_monitor = true; |
| 1023 | ad9389b_set_isr(sd, true); |
| 1024 | if (!ad9389b_s_power(sd, true)) { |
| 1025 | v4l2_dbg(1, debug, sd, |
| 1026 | "%s: monitor detected, powerup failed\n", __func__); |
| 1027 | return; |
| 1028 | } |
| 1029 | ad9389b_setup(sd); |
| 1030 | ad9389b_notify_monitor_detect(sd); |
| 1031 | state->edid.read_retries = EDID_MAX_RETRIES; |
| 1032 | queue_delayed_work(state->work_queue, |
| 1033 | &state->edid_handler, EDID_DELAY); |
| 1034 | } |
| 1035 | } else if (status & MASK_AD9389B_HPD_DETECT) { |
| 1036 | v4l2_dbg(1, debug, sd, "%s: hotplug detected\n", __func__); |
| 1037 | state->edid.read_retries = EDID_MAX_RETRIES; |
| 1038 | queue_delayed_work(state->work_queue, |
| 1039 | &state->edid_handler, EDID_DELAY); |
| 1040 | } else if (!(status & MASK_AD9389B_HPD_DETECT)) { |
| 1041 | v4l2_dbg(1, debug, sd, "%s: hotplug not detected\n", __func__); |
| 1042 | if (state->have_monitor) { |
| 1043 | v4l2_dbg(1, debug, sd, "%s: monitor not detected\n", __func__); |
| 1044 | state->have_monitor = false; |
| 1045 | ad9389b_notify_monitor_detect(sd); |
| 1046 | } |
| 1047 | ad9389b_s_power(sd, false); |
| 1048 | memset(&state->edid, 0, sizeof(struct ad9389b_state_edid)); |
| 1049 | } |
| 1050 | |
| 1051 | /* update read only ctrls */ |
| 1052 | v4l2_ctrl_s_ctrl(state->hotplug_ctrl, ad9389b_have_hotplug(sd) ? 0x1 : 0x0); |
| 1053 | v4l2_ctrl_s_ctrl(state->rx_sense_ctrl, ad9389b_have_rx_sense(sd) ? 0x1 : 0x0); |
| 1054 | v4l2_ctrl_s_ctrl(state->have_edid0_ctrl, state->edid.segments ? 0x1 : 0x0); |
| 1055 | } |
| 1056 | |
| 1057 | static bool edid_block_verify_crc(u8 *edid_block) |
| 1058 | { |
| 1059 | int i; |
| 1060 | u8 sum = 0; |
| 1061 | |
| 1062 | for (i = 0; i < 127; i++) |
| 1063 | sum += *(edid_block + i); |
| 1064 | return ((255 - sum + 1) == edid_block[127]); |
| 1065 | } |
| 1066 | |
| 1067 | static bool edid_segment_verify_crc(struct v4l2_subdev *sd, u32 segment) |
| 1068 | { |
| 1069 | struct ad9389b_state *state = get_ad9389b_state(sd); |
| 1070 | u32 blocks = state->edid.blocks; |
| 1071 | u8 *data = state->edid.data; |
| 1072 | |
| 1073 | if (edid_block_verify_crc(&data[segment * 256])) { |
| 1074 | if ((segment + 1) * 2 <= blocks) |
| 1075 | return edid_block_verify_crc(&data[segment * 256 + 128]); |
| 1076 | return true; |
| 1077 | } |
| 1078 | return false; |
| 1079 | } |
| 1080 | |
| 1081 | static bool ad9389b_check_edid_status(struct v4l2_subdev *sd) |
| 1082 | { |
| 1083 | struct ad9389b_state *state = get_ad9389b_state(sd); |
| 1084 | struct ad9389b_edid_detect ed; |
| 1085 | int segment; |
| 1086 | u8 edidRdy = ad9389b_rd(sd, 0xc5); |
| 1087 | |
| 1088 | v4l2_dbg(1, debug, sd, "%s: edid ready (retries: %d)\n", |
| 1089 | __func__, EDID_MAX_RETRIES - state->edid.read_retries); |
| 1090 | |
| 1091 | if (!(edidRdy & MASK_AD9389B_EDID_RDY)) |
| 1092 | return false; |
| 1093 | |
| 1094 | segment = ad9389b_rd(sd, 0xc4); |
| 1095 | if (segment >= EDID_MAX_SEGM) { |
| 1096 | v4l2_err(sd, "edid segment number too big\n"); |
| 1097 | return false; |
| 1098 | } |
| 1099 | v4l2_dbg(1, debug, sd, "%s: got segment %d\n", __func__, segment); |
| 1100 | ad9389b_edid_rd(sd, 256, &state->edid.data[segment * 256]); |
| 1101 | ad9389b_dbg_dump_edid(2, debug, sd, segment, |
| 1102 | &state->edid.data[segment * 256]); |
| 1103 | if (segment == 0) { |
| 1104 | state->edid.blocks = state->edid.data[0x7e] + 1; |
| 1105 | v4l2_dbg(1, debug, sd, "%s: %d blocks in total\n", |
| 1106 | __func__, state->edid.blocks); |
| 1107 | } |
| 1108 | if (!edid_segment_verify_crc(sd, segment)) { |
| 1109 | /* edid crc error, force reread of edid segment */ |
| 1110 | ad9389b_s_power(sd, false); |
| 1111 | ad9389b_s_power(sd, true); |
| 1112 | return false; |
| 1113 | } |
| 1114 | /* one more segment read ok */ |
| 1115 | state->edid.segments = segment + 1; |
| 1116 | if (((state->edid.data[0x7e] >> 1) + 1) > state->edid.segments) { |
| 1117 | /* Request next EDID segment */ |
| 1118 | v4l2_dbg(1, debug, sd, "%s: request segment %d\n", |
| 1119 | __func__, state->edid.segments); |
| 1120 | ad9389b_wr(sd, 0xc9, 0xf); |
| 1121 | ad9389b_wr(sd, 0xc4, state->edid.segments); |
| 1122 | state->edid.read_retries = EDID_MAX_RETRIES; |
| 1123 | queue_delayed_work(state->work_queue, |
| 1124 | &state->edid_handler, EDID_DELAY); |
| 1125 | return false; |
| 1126 | } |
| 1127 | |
| 1128 | /* report when we have all segments but report only for segment 0 */ |
| 1129 | ed.present = true; |
| 1130 | ed.segment = 0; |
| 1131 | v4l2_subdev_notify(sd, AD9389B_EDID_DETECT, (void *)&ed); |
| 1132 | state->edid_detect_counter++; |
| 1133 | v4l2_ctrl_s_ctrl(state->have_edid0_ctrl, state->edid.segments ? 0x1 : 0x0); |
| 1134 | return ed.present; |
| 1135 | } |
| 1136 | |
| 1137 | /* ----------------------------------------------------------------------- */ |
| 1138 | |
| 1139 | static void ad9389b_init_setup(struct v4l2_subdev *sd) |
| 1140 | { |
| 1141 | struct ad9389b_state *state = get_ad9389b_state(sd); |
| 1142 | struct ad9389b_state_edid *edid = &state->edid; |
| 1143 | |
| 1144 | v4l2_dbg(1, debug, sd, "%s\n", __func__); |
| 1145 | |
| 1146 | /* clear all interrupts */ |
| 1147 | ad9389b_wr(sd, 0x96, 0xff); |
| 1148 | |
| 1149 | memset(edid, 0, sizeof(struct ad9389b_state_edid)); |
| 1150 | state->have_monitor = false; |
| 1151 | ad9389b_set_isr(sd, false); |
| 1152 | } |
| 1153 | |
| 1154 | static int ad9389b_probe(struct i2c_client *client, const struct i2c_device_id *id) |
| 1155 | { |
| 1156 | const struct v4l2_dv_timings dv1080p60 = V4L2_DV_BT_CEA_1920X1080P60; |
| 1157 | struct ad9389b_state *state; |
| 1158 | struct ad9389b_platform_data *pdata = client->dev.platform_data; |
| 1159 | struct v4l2_ctrl_handler *hdl; |
| 1160 | struct v4l2_subdev *sd; |
| 1161 | int err = -EIO; |
| 1162 | |
| 1163 | /* Check if the adapter supports the needed features */ |
| 1164 | if (!i2c_check_functionality(client->adapter, I2C_FUNC_SMBUS_BYTE_DATA)) |
| 1165 | return -EIO; |
| 1166 | |
| 1167 | v4l_dbg(1, debug, client, "detecting ad9389b client on address 0x%x\n", |
| 1168 | client->addr << 1); |
| 1169 | |
Laurent Pinchart | c02b211 | 2013-05-02 08:29:43 -0300 | [diff] [blame] | 1170 | state = devm_kzalloc(&client->dev, sizeof(*state), GFP_KERNEL); |
Hans Verkuil | 117a55b | 2012-07-18 05:46:46 -0300 | [diff] [blame] | 1171 | if (!state) |
| 1172 | return -ENOMEM; |
| 1173 | |
| 1174 | /* Platform data */ |
| 1175 | if (pdata == NULL) { |
| 1176 | v4l_err(client, "No platform data!\n"); |
Laurent Pinchart | c02b211 | 2013-05-02 08:29:43 -0300 | [diff] [blame] | 1177 | return -ENODEV; |
Hans Verkuil | 117a55b | 2012-07-18 05:46:46 -0300 | [diff] [blame] | 1178 | } |
| 1179 | memcpy(&state->pdata, pdata, sizeof(state->pdata)); |
| 1180 | |
| 1181 | sd = &state->sd; |
| 1182 | v4l2_i2c_subdev_init(sd, client, &ad9389b_ops); |
| 1183 | sd->flags |= V4L2_SUBDEV_FL_HAS_DEVNODE; |
| 1184 | |
| 1185 | hdl = &state->hdl; |
| 1186 | v4l2_ctrl_handler_init(hdl, 5); |
| 1187 | |
| 1188 | /* private controls */ |
| 1189 | |
| 1190 | state->hdmi_mode_ctrl = v4l2_ctrl_new_std_menu(hdl, &ad9389b_ctrl_ops, |
| 1191 | V4L2_CID_DV_TX_MODE, V4L2_DV_TX_MODE_HDMI, |
| 1192 | 0, V4L2_DV_TX_MODE_DVI_D); |
| 1193 | state->hdmi_mode_ctrl->is_private = true; |
| 1194 | state->hotplug_ctrl = v4l2_ctrl_new_std(hdl, NULL, |
| 1195 | V4L2_CID_DV_TX_HOTPLUG, 0, 1, 0, 0); |
| 1196 | state->hotplug_ctrl->is_private = true; |
| 1197 | state->rx_sense_ctrl = v4l2_ctrl_new_std(hdl, NULL, |
| 1198 | V4L2_CID_DV_TX_RXSENSE, 0, 1, 0, 0); |
| 1199 | state->rx_sense_ctrl->is_private = true; |
| 1200 | state->have_edid0_ctrl = v4l2_ctrl_new_std(hdl, NULL, |
| 1201 | V4L2_CID_DV_TX_EDID_PRESENT, 0, 1, 0, 0); |
| 1202 | state->have_edid0_ctrl->is_private = true; |
| 1203 | state->rgb_quantization_range_ctrl = |
| 1204 | v4l2_ctrl_new_std_menu(hdl, &ad9389b_ctrl_ops, |
| 1205 | V4L2_CID_DV_TX_RGB_RANGE, V4L2_DV_RGB_RANGE_FULL, |
| 1206 | 0, V4L2_DV_RGB_RANGE_AUTO); |
| 1207 | state->rgb_quantization_range_ctrl->is_private = true; |
| 1208 | sd->ctrl_handler = hdl; |
| 1209 | if (hdl->error) { |
| 1210 | err = hdl->error; |
| 1211 | |
| 1212 | goto err_hdl; |
| 1213 | } |
| 1214 | |
| 1215 | state->pad.flags = MEDIA_PAD_FL_SINK; |
| 1216 | err = media_entity_init(&sd->entity, 1, &state->pad, 0); |
| 1217 | if (err) |
| 1218 | goto err_hdl; |
| 1219 | |
| 1220 | state->chip_revision = ad9389b_rd(sd, 0x0); |
| 1221 | if (state->chip_revision != 2) { |
| 1222 | v4l2_err(sd, "chip_revision %d != 2\n", state->chip_revision); |
| 1223 | err = -EIO; |
| 1224 | goto err_entity; |
| 1225 | } |
| 1226 | v4l2_dbg(1, debug, sd, "reg 0x41 0x%x, chip version (reg 0x00) 0x%x\n", |
| 1227 | ad9389b_rd(sd, 0x41), state->chip_revision); |
| 1228 | |
| 1229 | state->edid_i2c_client = i2c_new_dummy(client->adapter, (0x7e>>1)); |
| 1230 | if (state->edid_i2c_client == NULL) { |
| 1231 | v4l2_err(sd, "failed to register edid i2c client\n"); |
Wei Yongjun | 6ec735d | 2013-05-13 02:00:10 -0300 | [diff] [blame] | 1232 | err = -ENOMEM; |
Hans Verkuil | 117a55b | 2012-07-18 05:46:46 -0300 | [diff] [blame] | 1233 | goto err_entity; |
| 1234 | } |
| 1235 | |
| 1236 | state->work_queue = create_singlethread_workqueue(sd->name); |
| 1237 | if (state->work_queue == NULL) { |
| 1238 | v4l2_err(sd, "could not create workqueue\n"); |
Wei Yongjun | 6ec735d | 2013-05-13 02:00:10 -0300 | [diff] [blame] | 1239 | err = -ENOMEM; |
Hans Verkuil | 117a55b | 2012-07-18 05:46:46 -0300 | [diff] [blame] | 1240 | goto err_unreg; |
| 1241 | } |
| 1242 | |
| 1243 | INIT_DELAYED_WORK(&state->edid_handler, ad9389b_edid_handler); |
| 1244 | state->dv_timings = dv1080p60; |
| 1245 | |
| 1246 | ad9389b_init_setup(sd); |
| 1247 | ad9389b_set_isr(sd, true); |
| 1248 | |
| 1249 | v4l2_info(sd, "%s found @ 0x%x (%s)\n", client->name, |
| 1250 | client->addr << 1, client->adapter->name); |
| 1251 | return 0; |
| 1252 | |
| 1253 | err_unreg: |
| 1254 | i2c_unregister_device(state->edid_i2c_client); |
| 1255 | err_entity: |
| 1256 | media_entity_cleanup(&sd->entity); |
| 1257 | err_hdl: |
| 1258 | v4l2_ctrl_handler_free(&state->hdl); |
Hans Verkuil | 117a55b | 2012-07-18 05:46:46 -0300 | [diff] [blame] | 1259 | return err; |
| 1260 | } |
| 1261 | |
| 1262 | /* ----------------------------------------------------------------------- */ |
| 1263 | |
| 1264 | static int ad9389b_remove(struct i2c_client *client) |
| 1265 | { |
| 1266 | struct v4l2_subdev *sd = i2c_get_clientdata(client); |
| 1267 | struct ad9389b_state *state = get_ad9389b_state(sd); |
| 1268 | |
| 1269 | state->chip_revision = -1; |
| 1270 | |
| 1271 | v4l2_dbg(1, debug, sd, "%s removed @ 0x%x (%s)\n", client->name, |
| 1272 | client->addr << 1, client->adapter->name); |
| 1273 | |
| 1274 | ad9389b_s_stream(sd, false); |
| 1275 | ad9389b_s_audio_stream(sd, false); |
| 1276 | ad9389b_init_setup(sd); |
| 1277 | cancel_delayed_work(&state->edid_handler); |
| 1278 | i2c_unregister_device(state->edid_i2c_client); |
| 1279 | destroy_workqueue(state->work_queue); |
| 1280 | v4l2_device_unregister_subdev(sd); |
| 1281 | media_entity_cleanup(&sd->entity); |
| 1282 | v4l2_ctrl_handler_free(sd->ctrl_handler); |
Hans Verkuil | 117a55b | 2012-07-18 05:46:46 -0300 | [diff] [blame] | 1283 | return 0; |
| 1284 | } |
| 1285 | |
| 1286 | /* ----------------------------------------------------------------------- */ |
| 1287 | |
| 1288 | static struct i2c_device_id ad9389b_id[] = { |
Hans Verkuil | e127711 | 2013-05-29 06:59:51 -0300 | [diff] [blame] | 1289 | { "ad9389b", 0 }, |
| 1290 | { "ad9889b", 0 }, |
Hans Verkuil | 117a55b | 2012-07-18 05:46:46 -0300 | [diff] [blame] | 1291 | { } |
| 1292 | }; |
| 1293 | MODULE_DEVICE_TABLE(i2c, ad9389b_id); |
| 1294 | |
| 1295 | static struct i2c_driver ad9389b_driver = { |
| 1296 | .driver = { |
| 1297 | .owner = THIS_MODULE, |
| 1298 | .name = "ad9389b", |
| 1299 | }, |
| 1300 | .probe = ad9389b_probe, |
| 1301 | .remove = ad9389b_remove, |
| 1302 | .id_table = ad9389b_id, |
| 1303 | }; |
| 1304 | |
| 1305 | module_i2c_driver(ad9389b_driver); |