blob: 7b3cbde8c78378e25fb0d82ca60b58e20ffe51f5 [file] [log] [blame]
/*
* Copyright (C) 2001 Dave Engebretsen IBM Corporation
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation; either version 2 of the License, or
* (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program; if not, write to the Free Software
* Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
*/
#include <linux/sched.h>
#include <linux/interrupt.h>
#include <linux/irq.h>
#include <linux/of.h>
#include <linux/fs.h>
#include <linux/reboot.h>
#include <asm/machdep.h>
#include <asm/rtas.h>
#include <asm/firmware.h>
#include "pseries.h"
static unsigned char ras_log_buf[RTAS_ERROR_LOG_MAX];
static DEFINE_SPINLOCK(ras_log_buf_lock);
static char global_mce_data_buf[RTAS_ERROR_LOG_MAX];
static DEFINE_PER_CPU(__u64, mce_data_buf);
static int ras_check_exception_token;
#define EPOW_SENSOR_TOKEN 9
#define EPOW_SENSOR_INDEX 0
static irqreturn_t ras_epow_interrupt(int irq, void *dev_id);
static irqreturn_t ras_error_interrupt(int irq, void *dev_id);
/*
* Initialize handlers for the set of interrupts caused by hardware errors
* and power system events.
*/
static int __init init_ras_IRQ(void)
{
struct device_node *np;
ras_check_exception_token = rtas_token("check-exception");
/* Internal Errors */
np = of_find_node_by_path("/event-sources/internal-errors");
if (np != NULL) {
request_event_sources_irqs(np, ras_error_interrupt,
"RAS_ERROR");
of_node_put(np);
}
/* EPOW Events */
np = of_find_node_by_path("/event-sources/epow-events");
if (np != NULL) {
request_event_sources_irqs(np, ras_epow_interrupt, "RAS_EPOW");
of_node_put(np);
}
return 0;
}
subsys_initcall(init_ras_IRQ);
#define EPOW_SHUTDOWN_NORMAL 1
#define EPOW_SHUTDOWN_ON_UPS 2
#define EPOW_SHUTDOWN_LOSS_OF_CRITICAL_FUNCTIONS 3
#define EPOW_SHUTDOWN_AMBIENT_TEMPERATURE_TOO_HIGH 4
static void handle_system_shutdown(char event_modifier)
{
switch (event_modifier) {
case EPOW_SHUTDOWN_NORMAL:
pr_emerg("Firmware initiated power off");
orderly_poweroff(true);
break;
case EPOW_SHUTDOWN_ON_UPS:
pr_emerg("Loss of power reported by firmware, system is "
"running on UPS/battery");
break;
case EPOW_SHUTDOWN_LOSS_OF_CRITICAL_FUNCTIONS:
pr_emerg("Loss of system critical functions reported by "
"firmware");
pr_emerg("Check RTAS error log for details");
orderly_poweroff(true);
break;
case EPOW_SHUTDOWN_AMBIENT_TEMPERATURE_TOO_HIGH:
pr_emerg("Ambient temperature too high reported by firmware");
pr_emerg("Check RTAS error log for details");
orderly_poweroff(true);
break;
default:
pr_err("Unknown power/cooling shutdown event (modifier %d)",
event_modifier);
}
}
struct epow_errorlog {
unsigned char sensor_value;
unsigned char event_modifier;
unsigned char extended_modifier;
unsigned char reserved;
unsigned char platform_reason;
};
#define EPOW_RESET 0
#define EPOW_WARN_COOLING 1
#define EPOW_WARN_POWER 2
#define EPOW_SYSTEM_SHUTDOWN 3
#define EPOW_SYSTEM_HALT 4
#define EPOW_MAIN_ENCLOSURE 5
#define EPOW_POWER_OFF 7
void rtas_parse_epow_errlog(struct rtas_error_log *log)
{
struct pseries_errorlog *pseries_log;
struct epow_errorlog *epow_log;
char action_code;
char modifier;
pseries_log = get_pseries_errorlog(log, PSERIES_ELOG_SECT_ID_EPOW);
if (pseries_log == NULL)
return;
epow_log = (struct epow_errorlog *)pseries_log->data;
action_code = epow_log->sensor_value & 0xF; /* bottom 4 bits */
modifier = epow_log->event_modifier & 0xF; /* bottom 4 bits */
switch (action_code) {
case EPOW_RESET:
pr_err("Non critical power or cooling issue cleared");
break;
case EPOW_WARN_COOLING:
pr_err("Non critical cooling issue reported by firmware");
pr_err("Check RTAS error log for details");
break;
case EPOW_WARN_POWER:
pr_err("Non critical power issue reported by firmware");
pr_err("Check RTAS error log for details");
break;
case EPOW_SYSTEM_SHUTDOWN:
handle_system_shutdown(epow_log->event_modifier);
break;
case EPOW_SYSTEM_HALT:
pr_emerg("Firmware initiated power off");
orderly_poweroff(true);
break;
case EPOW_MAIN_ENCLOSURE:
case EPOW_POWER_OFF:
pr_emerg("Critical power/cooling issue reported by firmware");
pr_emerg("Check RTAS error log for details");
pr_emerg("Immediate power off");
emergency_sync();
kernel_power_off();
break;
default:
pr_err("Unknown power/cooling event (action code %d)",
action_code);
}
}
/* Handle environmental and power warning (EPOW) interrupts. */
static irqreturn_t ras_epow_interrupt(int irq, void *dev_id)
{
int status;
int state;
int critical;
status = rtas_get_sensor(EPOW_SENSOR_TOKEN, EPOW_SENSOR_INDEX, &state);
if (state > 3)
critical = 1; /* Time Critical */
else
critical = 0;
spin_lock(&ras_log_buf_lock);
status = rtas_call(ras_check_exception_token, 6, 1, NULL,
RTAS_VECTOR_EXTERNAL_INTERRUPT,
virq_to_hw(irq),
RTAS_EPOW_WARNING,
critical, __pa(&ras_log_buf),
rtas_get_error_log_max());
log_error(ras_log_buf, ERR_TYPE_RTAS_LOG, 0);
rtas_parse_epow_errlog((struct rtas_error_log *)ras_log_buf);
spin_unlock(&ras_log_buf_lock);
return IRQ_HANDLED;
}
/*
* Handle hardware error interrupts.
*
* RTAS check-exception is called to collect data on the exception. If
* the error is deemed recoverable, we log a warning and return.
* For nonrecoverable errors, an error is logged and we stop all processing
* as quickly as possible in order to prevent propagation of the failure.
*/
static irqreturn_t ras_error_interrupt(int irq, void *dev_id)
{
struct rtas_error_log *rtas_elog;
int status;
int fatal;
spin_lock(&ras_log_buf_lock);
status = rtas_call(ras_check_exception_token, 6, 1, NULL,
RTAS_VECTOR_EXTERNAL_INTERRUPT,
virq_to_hw(irq),
RTAS_INTERNAL_ERROR, 1 /* Time Critical */,
__pa(&ras_log_buf),
rtas_get_error_log_max());
rtas_elog = (struct rtas_error_log *)ras_log_buf;
if ((status == 0) && (rtas_elog->severity >= RTAS_SEVERITY_ERROR_SYNC))
fatal = 1;
else
fatal = 0;
/* format and print the extended information */
log_error(ras_log_buf, ERR_TYPE_RTAS_LOG, fatal);
if (fatal) {
pr_emerg("Fatal hardware error reported by firmware");
pr_emerg("Check RTAS error log for details");
pr_emerg("Immediate power off");
emergency_sync();
kernel_power_off();
} else {
pr_err("Recoverable hardware error reported by firmware");
}
spin_unlock(&ras_log_buf_lock);
return IRQ_HANDLED;
}
/*
* Some versions of FWNMI place the buffer inside the 4kB page starting at
* 0x7000. Other versions place it inside the rtas buffer. We check both.
*/
#define VALID_FWNMI_BUFFER(A) \
((((A) >= 0x7000) && ((A) < 0x7ff0)) || \
(((A) >= rtas.base) && ((A) < (rtas.base + rtas.size - 16))))
/*
* Get the error information for errors coming through the
* FWNMI vectors. The pt_regs' r3 will be updated to reflect
* the actual r3 if possible, and a ptr to the error log entry
* will be returned if found.
*
* If the RTAS error is not of the extended type, then we put it in a per
* cpu 64bit buffer. If it is the extended type we use global_mce_data_buf.
*
* The global_mce_data_buf does not have any locks or protection around it,
* if a second machine check comes in, or a system reset is done
* before we have logged the error, then we will get corruption in the
* error log. This is preferable over holding off on calling
* ibm,nmi-interlock which would result in us checkstopping if a
* second machine check did come in.
*/
static struct rtas_error_log *fwnmi_get_errinfo(struct pt_regs *regs)
{
unsigned long *savep;
struct rtas_error_log *h, *errhdr = NULL;
if (!VALID_FWNMI_BUFFER(regs->gpr[3])) {
printk(KERN_ERR "FWNMI: corrupt r3 0x%016lx\n", regs->gpr[3]);
return NULL;
}
savep = __va(regs->gpr[3]);
regs->gpr[3] = savep[0]; /* restore original r3 */
/* If it isn't an extended log we can use the per cpu 64bit buffer */
h = (struct rtas_error_log *)&savep[1];
if (!h->extended) {
memcpy(&__get_cpu_var(mce_data_buf), h, sizeof(__u64));
errhdr = (struct rtas_error_log *)&__get_cpu_var(mce_data_buf);
} else {
int len;
len = max_t(int, 8+h->extended_log_length, RTAS_ERROR_LOG_MAX);
memset(global_mce_data_buf, 0, RTAS_ERROR_LOG_MAX);
memcpy(global_mce_data_buf, h, len);
errhdr = (struct rtas_error_log *)global_mce_data_buf;
}
return errhdr;
}
/* Call this when done with the data returned by FWNMI_get_errinfo.
* It will release the saved data area for other CPUs in the
* partition to receive FWNMI errors.
*/
static void fwnmi_release_errinfo(void)
{
int ret = rtas_call(rtas_token("ibm,nmi-interlock"), 0, 1, NULL);
if (ret != 0)
printk(KERN_ERR "FWNMI: nmi-interlock failed: %d\n", ret);
}
int pSeries_system_reset_exception(struct pt_regs *regs)
{
if (fwnmi_active) {
struct rtas_error_log *errhdr = fwnmi_get_errinfo(regs);
if (errhdr) {
/* XXX Should look at FWNMI information */
}
fwnmi_release_errinfo();
}
return 0; /* need to perform reset */
}
/*
* See if we can recover from a machine check exception.
* This is only called on power4 (or above) and only via
* the Firmware Non-Maskable Interrupts (fwnmi) handler
* which provides the error analysis for us.
*
* Return 1 if corrected (or delivered a signal).
* Return 0 if there is nothing we can do.
*/
static int recover_mce(struct pt_regs *regs, struct rtas_error_log *err)
{
int recovered = 0;
if (!(regs->msr & MSR_RI)) {
/* If MSR_RI isn't set, we cannot recover */
recovered = 0;
} else if (err->disposition == RTAS_DISP_FULLY_RECOVERED) {
/* Platform corrected itself */
recovered = 1;
} else if (err->disposition == RTAS_DISP_LIMITED_RECOVERY) {
/* Platform corrected itself but could be degraded */
printk(KERN_ERR "MCE: limited recovery, system may "
"be degraded\n");
recovered = 1;
} else if (user_mode(regs) && !is_global_init(current) &&
err->severity == RTAS_SEVERITY_ERROR_SYNC) {
/*
* If we received a synchronous error when in userspace
* kill the task. Firmware may report details of the fail
* asynchronously, so we can't rely on the target and type
* fields being valid here.
*/
printk(KERN_ERR "MCE: uncorrectable error, killing task "
"%s:%d\n", current->comm, current->pid);
_exception(SIGBUS, regs, BUS_MCEERR_AR, regs->nip);
recovered = 1;
}
log_error((char *)err, ERR_TYPE_RTAS_LOG, 0);
return recovered;
}
/*
* Handle a machine check.
*
* Note that on Power 4 and beyond Firmware Non-Maskable Interrupts (fwnmi)
* should be present. If so the handler which called us tells us if the
* error was recovered (never true if RI=0).
*
* On hardware prior to Power 4 these exceptions were asynchronous which
* means we can't tell exactly where it occurred and so we can't recover.
*/
int pSeries_machine_check_exception(struct pt_regs *regs)
{
struct rtas_error_log *errp;
if (fwnmi_active) {
errp = fwnmi_get_errinfo(regs);
fwnmi_release_errinfo();
if (errp && recover_mce(regs, errp))
return 1;
}
return 0;
}