| /* |
| * Copyright (C) 2015 Jens Kuske <jenskuske@gmail.com> |
| * |
| * This file is dual-licensed: you can use it either under the terms |
| * of the GPL or the X11 license, at your option. Note that this dual |
| * licensing only applies to this file, and not this project as a |
| * whole. |
| * |
| * a) This file is free software; you can redistribute it and/or |
| * modify it under the terms of the GNU General Public License as |
| * published by the Free Software Foundation; either version 2 of the |
| * License, or (at your option) any later version. |
| * |
| * This file is distributed in the hope that it will be useful, |
| * but WITHOUT ANY WARRANTY; without even the implied warranty of |
| * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the |
| * GNU General Public License for more details. |
| * |
| * Or, alternatively, |
| * |
| * b) Permission is hereby granted, free of charge, to any person |
| * obtaining a copy of this software and associated documentation |
| * files (the "Software"), to deal in the Software without |
| * restriction, including without limitation the rights to use, |
| * copy, modify, merge, publish, distribute, sublicense, and/or |
| * sell copies of the Software, and to permit persons to whom the |
| * Software is furnished to do so, subject to the following |
| * conditions: |
| * |
| * The above copyright notice and this permission notice shall be |
| * included in all copies or substantial portions of the Software. |
| * |
| * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, |
| * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES |
| * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND |
| * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT |
| * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, |
| * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING |
| * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR |
| * OTHER DEALINGS IN THE SOFTWARE. |
| */ |
| |
| #include "skeleton.dtsi" |
| |
| #include <dt-bindings/clock/sun8i-h3-ccu.h> |
| #include <dt-bindings/interrupt-controller/arm-gic.h> |
| #include <dt-bindings/pinctrl/sun4i-a10.h> |
| #include <dt-bindings/reset/sun8i-h3-ccu.h> |
| |
| / { |
| interrupt-parent = <&gic>; |
| |
| cpus { |
| #address-cells = <1>; |
| #size-cells = <0>; |
| |
| cpu@0 { |
| compatible = "arm,cortex-a7"; |
| device_type = "cpu"; |
| reg = <0>; |
| }; |
| |
| cpu@1 { |
| compatible = "arm,cortex-a7"; |
| device_type = "cpu"; |
| reg = <1>; |
| }; |
| |
| cpu@2 { |
| compatible = "arm,cortex-a7"; |
| device_type = "cpu"; |
| reg = <2>; |
| }; |
| |
| cpu@3 { |
| compatible = "arm,cortex-a7"; |
| device_type = "cpu"; |
| reg = <3>; |
| }; |
| }; |
| |
| timer { |
| compatible = "arm,armv7-timer"; |
| interrupts = <GIC_PPI 13 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>, |
| <GIC_PPI 14 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>, |
| <GIC_PPI 11 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>, |
| <GIC_PPI 10 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>; |
| }; |
| |
| clocks { |
| #address-cells = <1>; |
| #size-cells = <1>; |
| ranges; |
| |
| osc24M: osc24M_clk { |
| #clock-cells = <0>; |
| compatible = "fixed-clock"; |
| clock-frequency = <24000000>; |
| clock-output-names = "osc24M"; |
| }; |
| |
| osc32k: osc32k_clk { |
| #clock-cells = <0>; |
| compatible = "fixed-clock"; |
| clock-frequency = <32768>; |
| clock-output-names = "osc32k"; |
| }; |
| |
| apb0: apb0_clk { |
| compatible = "fixed-factor-clock"; |
| #clock-cells = <0>; |
| clock-div = <1>; |
| clock-mult = <1>; |
| clocks = <&osc24M>; |
| clock-output-names = "apb0"; |
| }; |
| |
| apb0_gates: clk@01f01428 { |
| compatible = "allwinner,sun8i-h3-apb0-gates-clk", |
| "allwinner,sun4i-a10-gates-clk"; |
| reg = <0x01f01428 0x4>; |
| #clock-cells = <1>; |
| clocks = <&apb0>; |
| clock-indices = <0>, <1>; |
| clock-output-names = "apb0_pio", "apb0_ir"; |
| }; |
| |
| ir_clk: ir_clk@01f01454 { |
| compatible = "allwinner,sun4i-a10-mod0-clk"; |
| reg = <0x01f01454 0x4>; |
| #clock-cells = <0>; |
| clocks = <&osc32k>, <&osc24M>; |
| clock-output-names = "ir"; |
| }; |
| }; |
| |
| soc { |
| compatible = "simple-bus"; |
| #address-cells = <1>; |
| #size-cells = <1>; |
| ranges; |
| |
| dma: dma-controller@01c02000 { |
| compatible = "allwinner,sun8i-h3-dma"; |
| reg = <0x01c02000 0x1000>; |
| interrupts = <GIC_SPI 50 IRQ_TYPE_LEVEL_HIGH>; |
| clocks = <&ccu CLK_BUS_DMA>; |
| resets = <&ccu RST_BUS_DMA>; |
| #dma-cells = <1>; |
| }; |
| |
| mmc0: mmc@01c0f000 { |
| compatible = "allwinner,sun7i-a20-mmc"; |
| reg = <0x01c0f000 0x1000>; |
| clocks = <&ccu CLK_BUS_MMC0>, |
| <&ccu CLK_MMC0>, |
| <&ccu CLK_MMC0_OUTPUT>, |
| <&ccu CLK_MMC0_SAMPLE>; |
| clock-names = "ahb", |
| "mmc", |
| "output", |
| "sample"; |
| resets = <&ccu RST_BUS_MMC0>; |
| reset-names = "ahb"; |
| interrupts = <GIC_SPI 60 IRQ_TYPE_LEVEL_HIGH>; |
| status = "disabled"; |
| #address-cells = <1>; |
| #size-cells = <0>; |
| }; |
| |
| mmc1: mmc@01c10000 { |
| compatible = "allwinner,sun7i-a20-mmc"; |
| reg = <0x01c10000 0x1000>; |
| clocks = <&ccu CLK_BUS_MMC1>, |
| <&ccu CLK_MMC1>, |
| <&ccu CLK_MMC1_OUTPUT>, |
| <&ccu CLK_MMC1_SAMPLE>; |
| clock-names = "ahb", |
| "mmc", |
| "output", |
| "sample"; |
| resets = <&ccu RST_BUS_MMC1>; |
| reset-names = "ahb"; |
| interrupts = <GIC_SPI 61 IRQ_TYPE_LEVEL_HIGH>; |
| status = "disabled"; |
| #address-cells = <1>; |
| #size-cells = <0>; |
| }; |
| |
| mmc2: mmc@01c11000 { |
| compatible = "allwinner,sun7i-a20-mmc"; |
| reg = <0x01c11000 0x1000>; |
| clocks = <&ccu CLK_BUS_MMC2>, |
| <&ccu CLK_MMC2>, |
| <&ccu CLK_MMC2_OUTPUT>, |
| <&ccu CLK_MMC2_SAMPLE>; |
| clock-names = "ahb", |
| "mmc", |
| "output", |
| "sample"; |
| resets = <&ccu RST_BUS_MMC2>; |
| reset-names = "ahb"; |
| interrupts = <GIC_SPI 62 IRQ_TYPE_LEVEL_HIGH>; |
| status = "disabled"; |
| #address-cells = <1>; |
| #size-cells = <0>; |
| }; |
| |
| usbphy: phy@01c19400 { |
| compatible = "allwinner,sun8i-h3-usb-phy"; |
| reg = <0x01c19400 0x2c>, |
| <0x01c1a800 0x4>, |
| <0x01c1b800 0x4>, |
| <0x01c1c800 0x4>, |
| <0x01c1d800 0x4>; |
| reg-names = "phy_ctrl", |
| "pmu0", |
| "pmu1", |
| "pmu2", |
| "pmu3"; |
| clocks = <&ccu CLK_USB_PHY0>, |
| <&ccu CLK_USB_PHY1>, |
| <&ccu CLK_USB_PHY2>, |
| <&ccu CLK_USB_PHY3>; |
| clock-names = "usb0_phy", |
| "usb1_phy", |
| "usb2_phy", |
| "usb3_phy"; |
| resets = <&ccu RST_USB_PHY0>, |
| <&ccu RST_USB_PHY1>, |
| <&ccu RST_USB_PHY2>, |
| <&ccu RST_USB_PHY3>; |
| reset-names = "usb0_reset", |
| "usb1_reset", |
| "usb2_reset", |
| "usb3_reset"; |
| status = "disabled"; |
| #phy-cells = <1>; |
| }; |
| |
| ehci1: usb@01c1b000 { |
| compatible = "allwinner,sun8i-h3-ehci", "generic-ehci"; |
| reg = <0x01c1b000 0x100>; |
| interrupts = <GIC_SPI 74 IRQ_TYPE_LEVEL_HIGH>; |
| clocks = <&ccu CLK_BUS_EHCI1>, <&ccu CLK_BUS_OHCI1>; |
| resets = <&ccu RST_BUS_EHCI1>, <&ccu RST_BUS_OHCI1>; |
| phys = <&usbphy 1>; |
| phy-names = "usb"; |
| status = "disabled"; |
| }; |
| |
| ohci1: usb@01c1b400 { |
| compatible = "allwinner,sun8i-h3-ohci", "generic-ohci"; |
| reg = <0x01c1b400 0x100>; |
| interrupts = <GIC_SPI 75 IRQ_TYPE_LEVEL_HIGH>; |
| clocks = <&ccu CLK_BUS_EHCI1>, <&ccu CLK_BUS_OHCI1>, |
| <&ccu CLK_USB_OHCI1>; |
| resets = <&ccu RST_BUS_EHCI1>, <&ccu RST_BUS_OHCI1>; |
| phys = <&usbphy 1>; |
| phy-names = "usb"; |
| status = "disabled"; |
| }; |
| |
| ehci2: usb@01c1c000 { |
| compatible = "allwinner,sun8i-h3-ehci", "generic-ehci"; |
| reg = <0x01c1c000 0x100>; |
| interrupts = <GIC_SPI 76 IRQ_TYPE_LEVEL_HIGH>; |
| clocks = <&ccu CLK_BUS_EHCI2>, <&ccu CLK_BUS_OHCI2>; |
| resets = <&ccu RST_BUS_EHCI2>, <&ccu RST_BUS_OHCI2>; |
| phys = <&usbphy 2>; |
| phy-names = "usb"; |
| status = "disabled"; |
| }; |
| |
| ohci2: usb@01c1c400 { |
| compatible = "allwinner,sun8i-h3-ohci", "generic-ohci"; |
| reg = <0x01c1c400 0x100>; |
| interrupts = <GIC_SPI 77 IRQ_TYPE_LEVEL_HIGH>; |
| clocks = <&ccu CLK_BUS_EHCI2>, <&ccu CLK_BUS_OHCI2>, |
| <&ccu CLK_USB_OHCI2>; |
| resets = <&ccu RST_BUS_EHCI2>, <&ccu RST_BUS_OHCI2>; |
| phys = <&usbphy 2>; |
| phy-names = "usb"; |
| status = "disabled"; |
| }; |
| |
| ehci3: usb@01c1d000 { |
| compatible = "allwinner,sun8i-h3-ehci", "generic-ehci"; |
| reg = <0x01c1d000 0x100>; |
| interrupts = <GIC_SPI 78 IRQ_TYPE_LEVEL_HIGH>; |
| clocks = <&ccu CLK_BUS_EHCI3>, <&ccu CLK_BUS_OHCI3>; |
| resets = <&ccu RST_BUS_EHCI3>, <&ccu RST_BUS_OHCI3>; |
| phys = <&usbphy 3>; |
| phy-names = "usb"; |
| status = "disabled"; |
| }; |
| |
| ohci3: usb@01c1d400 { |
| compatible = "allwinner,sun8i-h3-ohci", "generic-ohci"; |
| reg = <0x01c1d400 0x100>; |
| interrupts = <GIC_SPI 79 IRQ_TYPE_LEVEL_HIGH>; |
| clocks = <&ccu CLK_BUS_EHCI3>, <&ccu CLK_BUS_OHCI3>, |
| <&ccu CLK_USB_OHCI3>; |
| resets = <&ccu RST_BUS_EHCI3>, <&ccu RST_BUS_OHCI3>; |
| phys = <&usbphy 3>; |
| phy-names = "usb"; |
| status = "disabled"; |
| }; |
| |
| ccu: clock@01c20000 { |
| compatible = "allwinner,sun8i-h3-ccu"; |
| reg = <0x01c20000 0x400>; |
| clocks = <&osc24M>, <&osc32k>; |
| clock-names = "hosc", "losc"; |
| #clock-cells = <1>; |
| #reset-cells = <1>; |
| }; |
| |
| pio: pinctrl@01c20800 { |
| compatible = "allwinner,sun8i-h3-pinctrl"; |
| reg = <0x01c20800 0x400>; |
| interrupts = <GIC_SPI 11 IRQ_TYPE_LEVEL_HIGH>, |
| <GIC_SPI 17 IRQ_TYPE_LEVEL_HIGH>; |
| clocks = <&ccu CLK_BUS_PIO>; |
| gpio-controller; |
| #gpio-cells = <3>; |
| interrupt-controller; |
| #interrupt-cells = <3>; |
| |
| mmc0_pins_a: mmc0@0 { |
| allwinner,pins = "PF0", "PF1", "PF2", "PF3", |
| "PF4", "PF5"; |
| allwinner,function = "mmc0"; |
| allwinner,drive = <SUN4I_PINCTRL_30_MA>; |
| allwinner,pull = <SUN4I_PINCTRL_NO_PULL>; |
| }; |
| |
| mmc0_cd_pin: mmc0_cd_pin@0 { |
| allwinner,pins = "PF6"; |
| allwinner,function = "gpio_in"; |
| allwinner,drive = <SUN4I_PINCTRL_10_MA>; |
| allwinner,pull = <SUN4I_PINCTRL_PULL_UP>; |
| }; |
| |
| mmc1_pins_a: mmc1@0 { |
| allwinner,pins = "PG0", "PG1", "PG2", "PG3", |
| "PG4", "PG5"; |
| allwinner,function = "mmc1"; |
| allwinner,drive = <SUN4I_PINCTRL_30_MA>; |
| allwinner,pull = <SUN4I_PINCTRL_NO_PULL>; |
| }; |
| |
| mmc2_8bit_pins: mmc2_8bit { |
| allwinner,pins = "PC5", "PC6", "PC8", |
| "PC9", "PC10", "PC11", |
| "PC12", "PC13", "PC14", |
| "PC15", "PC16"; |
| allwinner,function = "mmc2"; |
| allwinner,drive = <SUN4I_PINCTRL_30_MA>; |
| allwinner,pull = <SUN4I_PINCTRL_NO_PULL>; |
| }; |
| |
| uart0_pins_a: uart0@0 { |
| allwinner,pins = "PA4", "PA5"; |
| allwinner,function = "uart0"; |
| allwinner,drive = <SUN4I_PINCTRL_10_MA>; |
| allwinner,pull = <SUN4I_PINCTRL_NO_PULL>; |
| }; |
| |
| uart1_pins_a: uart1@0 { |
| allwinner,pins = "PG6", "PG7", "PG8", "PG9"; |
| allwinner,function = "uart1"; |
| allwinner,drive = <SUN4I_PINCTRL_10_MA>; |
| allwinner,pull = <SUN4I_PINCTRL_NO_PULL>; |
| }; |
| }; |
| |
| timer@01c20c00 { |
| compatible = "allwinner,sun4i-a10-timer"; |
| reg = <0x01c20c00 0xa0>; |
| interrupts = <GIC_SPI 18 IRQ_TYPE_LEVEL_HIGH>, |
| <GIC_SPI 19 IRQ_TYPE_LEVEL_HIGH>; |
| clocks = <&osc24M>; |
| }; |
| |
| wdt0: watchdog@01c20ca0 { |
| compatible = "allwinner,sun6i-a31-wdt"; |
| reg = <0x01c20ca0 0x20>; |
| interrupts = <GIC_SPI 25 IRQ_TYPE_LEVEL_HIGH>; |
| }; |
| |
| pwm: pwm@01c21400 { |
| compatible = "allwinner,sun8i-h3-pwm"; |
| reg = <0x01c21400 0x8>; |
| clocks = <&osc24M>; |
| #pwm-cells = <3>; |
| status = "disabled"; |
| }; |
| |
| uart0: serial@01c28000 { |
| compatible = "snps,dw-apb-uart"; |
| reg = <0x01c28000 0x400>; |
| interrupts = <GIC_SPI 0 IRQ_TYPE_LEVEL_HIGH>; |
| reg-shift = <2>; |
| reg-io-width = <4>; |
| clocks = <&ccu CLK_BUS_UART0>; |
| resets = <&ccu RST_BUS_UART0>; |
| dmas = <&dma 6>, <&dma 6>; |
| dma-names = "rx", "tx"; |
| status = "disabled"; |
| }; |
| |
| uart1: serial@01c28400 { |
| compatible = "snps,dw-apb-uart"; |
| reg = <0x01c28400 0x400>; |
| interrupts = <GIC_SPI 1 IRQ_TYPE_LEVEL_HIGH>; |
| reg-shift = <2>; |
| reg-io-width = <4>; |
| clocks = <&ccu CLK_BUS_UART1>; |
| resets = <&ccu RST_BUS_UART1>; |
| dmas = <&dma 7>, <&dma 7>; |
| dma-names = "rx", "tx"; |
| status = "disabled"; |
| }; |
| |
| uart2: serial@01c28800 { |
| compatible = "snps,dw-apb-uart"; |
| reg = <0x01c28800 0x400>; |
| interrupts = <GIC_SPI 2 IRQ_TYPE_LEVEL_HIGH>; |
| reg-shift = <2>; |
| reg-io-width = <4>; |
| clocks = <&ccu CLK_BUS_UART2>; |
| resets = <&ccu RST_BUS_UART2>; |
| dmas = <&dma 8>, <&dma 8>; |
| dma-names = "rx", "tx"; |
| status = "disabled"; |
| }; |
| |
| uart3: serial@01c28c00 { |
| compatible = "snps,dw-apb-uart"; |
| reg = <0x01c28c00 0x400>; |
| interrupts = <GIC_SPI 3 IRQ_TYPE_LEVEL_HIGH>; |
| reg-shift = <2>; |
| reg-io-width = <4>; |
| clocks = <&ccu CLK_BUS_UART3>; |
| resets = <&ccu RST_BUS_UART3>; |
| dmas = <&dma 9>, <&dma 9>; |
| dma-names = "rx", "tx"; |
| status = "disabled"; |
| }; |
| |
| gic: interrupt-controller@01c81000 { |
| compatible = "arm,cortex-a7-gic", "arm,cortex-a15-gic"; |
| reg = <0x01c81000 0x1000>, |
| <0x01c82000 0x1000>, |
| <0x01c84000 0x2000>, |
| <0x01c86000 0x2000>; |
| interrupt-controller; |
| #interrupt-cells = <3>; |
| interrupts = <GIC_PPI 9 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_HIGH)>; |
| }; |
| |
| rtc: rtc@01f00000 { |
| compatible = "allwinner,sun6i-a31-rtc"; |
| reg = <0x01f00000 0x54>; |
| interrupts = <GIC_SPI 40 IRQ_TYPE_LEVEL_HIGH>, |
| <GIC_SPI 41 IRQ_TYPE_LEVEL_HIGH>; |
| }; |
| |
| apb0_reset: reset@01f014b0 { |
| reg = <0x01f014b0 0x4>; |
| compatible = "allwinner,sun6i-a31-clock-reset"; |
| #reset-cells = <1>; |
| }; |
| |
| ir: ir@01f02000 { |
| compatible = "allwinner,sun5i-a13-ir"; |
| clocks = <&apb0_gates 1>, <&ir_clk>; |
| clock-names = "apb", "ir"; |
| resets = <&apb0_reset 1>; |
| interrupts = <GIC_SPI 37 IRQ_TYPE_LEVEL_HIGH>; |
| reg = <0x01f02000 0x40>; |
| status = "disabled"; |
| }; |
| |
| r_pio: pinctrl@01f02c00 { |
| compatible = "allwinner,sun8i-h3-r-pinctrl"; |
| reg = <0x01f02c00 0x400>; |
| interrupts = <GIC_SPI 45 IRQ_TYPE_LEVEL_HIGH>; |
| clocks = <&apb0_gates 0>; |
| resets = <&apb0_reset 0>; |
| gpio-controller; |
| #gpio-cells = <3>; |
| interrupt-controller; |
| #interrupt-cells = <3>; |
| |
| ir_pins_a: ir@0 { |
| allwinner,pins = "PL11"; |
| allwinner,function = "s_cir_rx"; |
| allwinner,drive = <SUN4I_PINCTRL_10_MA>; |
| allwinner,pull = <SUN4I_PINCTRL_NO_PULL>; |
| }; |
| }; |
| }; |
| }; |