| //------------------------------------------------------------------------------ |
| // <copyright file="hif.h" company="Atheros"> |
| // Copyright (c) 2004-2010 Atheros Corporation. All rights reserved. |
| // |
| // |
| // Permission to use, copy, modify, and/or distribute this software for any |
| // purpose with or without fee is hereby granted, provided that the above |
| // copyright notice and this permission notice appear in all copies. |
| // |
| // THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES |
| // WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF |
| // MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR |
| // ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES |
| // WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN |
| // ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF |
| // OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE. |
| // |
| // |
| //------------------------------------------------------------------------------ |
| //============================================================================== |
| // HIF specific declarations and prototypes |
| // |
| // Author(s): ="Atheros" |
| //============================================================================== |
| #ifndef _HIF_H_ |
| #define _HIF_H_ |
| |
| #ifdef __cplusplus |
| extern "C" { |
| #endif /* __cplusplus */ |
| |
| /* Header files */ |
| #include "a_config.h" |
| #include "athdefs.h" |
| #include "a_types.h" |
| #include "a_osapi.h" |
| #include "dl_list.h" |
| |
| |
| typedef struct htc_callbacks HTC_CALLBACKS; |
| typedef struct hif_device HIF_DEVICE; |
| |
| /* |
| * direction - Direction of transfer (HIF_READ/HIF_WRITE). |
| */ |
| #define HIF_READ 0x00000001 |
| #define HIF_WRITE 0x00000002 |
| #define HIF_DIR_MASK (HIF_READ | HIF_WRITE) |
| |
| /* |
| * type - An interface may support different kind of read/write commands. |
| * For example: SDIO supports CMD52/CMD53s. In case of MSIO it |
| * translates to using different kinds of TPCs. The command type |
| * is thus divided into a basic and an extended command and can |
| * be specified using HIF_BASIC_IO/HIF_EXTENDED_IO. |
| */ |
| #define HIF_BASIC_IO 0x00000004 |
| #define HIF_EXTENDED_IO 0x00000008 |
| #define HIF_TYPE_MASK (HIF_BASIC_IO | HIF_EXTENDED_IO) |
| |
| /* |
| * emode - This indicates the whether the command is to be executed in a |
| * blocking or non-blocking fashion (HIF_SYNCHRONOUS/ |
| * HIF_ASYNCHRONOUS). The read/write data paths in HTC have been |
| * implemented using the asynchronous mode allowing the the bus |
| * driver to indicate the completion of operation through the |
| * registered callback routine. The requirement primarily comes |
| * from the contexts these operations get called from (a driver's |
| * transmit context or the ISR context in case of receive). |
| * Support for both of these modes is essential. |
| */ |
| #define HIF_SYNCHRONOUS 0x00000010 |
| #define HIF_ASYNCHRONOUS 0x00000020 |
| #define HIF_EMODE_MASK (HIF_SYNCHRONOUS | HIF_ASYNCHRONOUS) |
| |
| /* |
| * dmode - An interface may support different kinds of commands based on |
| * the tradeoff between the amount of data it can carry and the |
| * setup time. Byte and Block modes are supported (HIF_BYTE_BASIS/ |
| * HIF_BLOCK_BASIS). In case of latter, the data is rounded off |
| * to the nearest block size by padding. The size of the block is |
| * configurable at compile time using the HIF_BLOCK_SIZE and is |
| * negotiated with the target during initialization after the |
| * AR6000 interrupts are enabled. |
| */ |
| #define HIF_BYTE_BASIS 0x00000040 |
| #define HIF_BLOCK_BASIS 0x00000080 |
| #define HIF_DMODE_MASK (HIF_BYTE_BASIS | HIF_BLOCK_BASIS) |
| |
| /* |
| * amode - This indicates if the address has to be incremented on AR6000 |
| * after every read/write operation (HIF?FIXED_ADDRESS/ |
| * HIF_INCREMENTAL_ADDRESS). |
| */ |
| #define HIF_FIXED_ADDRESS 0x00000100 |
| #define HIF_INCREMENTAL_ADDRESS 0x00000200 |
| #define HIF_AMODE_MASK (HIF_FIXED_ADDRESS | HIF_INCREMENTAL_ADDRESS) |
| |
| #define HIF_WR_ASYNC_BYTE_FIX \ |
| (HIF_WRITE | HIF_ASYNCHRONOUS | HIF_EXTENDED_IO | HIF_BYTE_BASIS | HIF_FIXED_ADDRESS) |
| #define HIF_WR_ASYNC_BYTE_INC \ |
| (HIF_WRITE | HIF_ASYNCHRONOUS | HIF_EXTENDED_IO | HIF_BYTE_BASIS | HIF_INCREMENTAL_ADDRESS) |
| #define HIF_WR_ASYNC_BLOCK_INC \ |
| (HIF_WRITE | HIF_ASYNCHRONOUS | HIF_EXTENDED_IO | HIF_BLOCK_BASIS | HIF_INCREMENTAL_ADDRESS) |
| #define HIF_WR_SYNC_BYTE_FIX \ |
| (HIF_WRITE | HIF_SYNCHRONOUS | HIF_EXTENDED_IO | HIF_BYTE_BASIS | HIF_FIXED_ADDRESS) |
| #define HIF_WR_SYNC_BYTE_INC \ |
| (HIF_WRITE | HIF_SYNCHRONOUS | HIF_EXTENDED_IO | HIF_BYTE_BASIS | HIF_INCREMENTAL_ADDRESS) |
| #define HIF_WR_SYNC_BLOCK_INC \ |
| (HIF_WRITE | HIF_SYNCHRONOUS | HIF_EXTENDED_IO | HIF_BLOCK_BASIS | HIF_INCREMENTAL_ADDRESS) |
| #define HIF_WR_ASYNC_BLOCK_FIX \ |
| (HIF_WRITE | HIF_ASYNCHRONOUS | HIF_EXTENDED_IO | HIF_BLOCK_BASIS | HIF_FIXED_ADDRESS) |
| #define HIF_WR_SYNC_BLOCK_FIX \ |
| (HIF_WRITE | HIF_SYNCHRONOUS | HIF_EXTENDED_IO | HIF_BLOCK_BASIS | HIF_FIXED_ADDRESS) |
| #define HIF_RD_SYNC_BYTE_INC \ |
| (HIF_READ | HIF_SYNCHRONOUS | HIF_EXTENDED_IO | HIF_BYTE_BASIS | HIF_INCREMENTAL_ADDRESS) |
| #define HIF_RD_SYNC_BYTE_FIX \ |
| (HIF_READ | HIF_SYNCHRONOUS | HIF_EXTENDED_IO | HIF_BYTE_BASIS | HIF_FIXED_ADDRESS) |
| #define HIF_RD_ASYNC_BYTE_FIX \ |
| (HIF_READ | HIF_ASYNCHRONOUS | HIF_EXTENDED_IO | HIF_BYTE_BASIS | HIF_FIXED_ADDRESS) |
| #define HIF_RD_ASYNC_BLOCK_FIX \ |
| (HIF_READ | HIF_ASYNCHRONOUS | HIF_EXTENDED_IO | HIF_BLOCK_BASIS | HIF_FIXED_ADDRESS) |
| #define HIF_RD_ASYNC_BYTE_INC \ |
| (HIF_READ | HIF_ASYNCHRONOUS | HIF_EXTENDED_IO | HIF_BYTE_BASIS | HIF_INCREMENTAL_ADDRESS) |
| #define HIF_RD_ASYNC_BLOCK_INC \ |
| (HIF_READ | HIF_ASYNCHRONOUS | HIF_EXTENDED_IO | HIF_BLOCK_BASIS | HIF_INCREMENTAL_ADDRESS) |
| #define HIF_RD_SYNC_BLOCK_INC \ |
| (HIF_READ | HIF_SYNCHRONOUS | HIF_EXTENDED_IO | HIF_BLOCK_BASIS | HIF_INCREMENTAL_ADDRESS) |
| #define HIF_RD_SYNC_BLOCK_FIX \ |
| (HIF_READ | HIF_SYNCHRONOUS | HIF_EXTENDED_IO | HIF_BLOCK_BASIS | HIF_FIXED_ADDRESS) |
| |
| typedef enum { |
| HIF_DEVICE_POWER_STATE = 0, |
| HIF_DEVICE_GET_MBOX_BLOCK_SIZE, |
| HIF_DEVICE_GET_MBOX_ADDR, |
| HIF_DEVICE_GET_PENDING_EVENTS_FUNC, |
| HIF_DEVICE_GET_IRQ_PROC_MODE, |
| HIF_DEVICE_GET_RECV_EVENT_MASK_UNMASK_FUNC, |
| HIF_DEVICE_POWER_STATE_CHANGE, |
| HIF_DEVICE_GET_IRQ_YIELD_PARAMS, |
| HIF_CONFIGURE_QUERY_SCATTER_REQUEST_SUPPORT, |
| HIF_DEVICE_GET_OS_DEVICE, |
| HIF_DEVICE_DEBUG_BUS_STATE, |
| } HIF_DEVICE_CONFIG_OPCODE; |
| |
| /* |
| * HIF CONFIGURE definitions: |
| * |
| * HIF_DEVICE_GET_MBOX_BLOCK_SIZE |
| * input : none |
| * output : array of 4 A_UINT32s |
| * notes: block size is returned for each mailbox (4) |
| * |
| * HIF_DEVICE_GET_MBOX_ADDR |
| * input : none |
| * output : HIF_DEVICE_MBOX_INFO |
| * notes: |
| * |
| * HIF_DEVICE_GET_PENDING_EVENTS_FUNC |
| * input : none |
| * output: HIF_PENDING_EVENTS_FUNC function pointer |
| * notes: this is optional for the HIF layer, if the request is |
| * not handled then it indicates that the upper layer can use |
| * the standard device methods to get pending events (IRQs, mailbox messages etc..) |
| * otherwise it can call the function pointer to check pending events. |
| * |
| * HIF_DEVICE_GET_IRQ_PROC_MODE |
| * input : none |
| * output : HIF_DEVICE_IRQ_PROCESSING_MODE (interrupt processing mode) |
| * note: the hif layer interfaces with the underlying OS-specific bus driver. The HIF |
| * layer can report whether IRQ processing is requires synchronous behavior or |
| * can be processed using asynchronous bus requests (typically faster). |
| * |
| * HIF_DEVICE_GET_RECV_EVENT_MASK_UNMASK_FUNC |
| * input : |
| * output : HIF_MASK_UNMASK_RECV_EVENT function pointer |
| * notes: this is optional for the HIF layer. The HIF layer may require a special mechanism |
| * to mask receive message events. The upper layer can call this pointer when it needs |
| * to mask/unmask receive events (in case it runs out of buffers). |
| * |
| * HIF_DEVICE_POWER_STATE_CHANGE |
| * |
| * input : HIF_DEVICE_POWER_CHANGE_TYPE |
| * output : none |
| * note: this is optional for the HIF layer. The HIF layer can handle power on/off state change |
| * requests in an interconnect specific way. This is highly OS and bus driver dependent. |
| * The caller must guarantee that no HIF read/write requests will be made after the device |
| * is powered down. |
| * |
| * HIF_DEVICE_GET_IRQ_YIELD_PARAMS |
| * |
| * input : none |
| * output : HIF_DEVICE_IRQ_YIELD_PARAMS |
| * note: This query checks if the HIF layer wishes to impose a processing yield count for the DSR handler. |
| * The DSR callback handler will exit after a fixed number of RX packets or events are processed. |
| * This query is only made if the device reports an IRQ processing mode of HIF_DEVICE_IRQ_SYNC_ONLY. |
| * The HIF implementation can ignore this command if it does not desire the DSR callback to yield. |
| * The HIF layer can indicate the maximum number of IRQ processing units (RX packets) before the |
| * DSR handler callback must yield and return control back to the HIF layer. When a yield limit is |
| * used the DSR callback will not call HIFAckInterrupts() as it would normally do before returning. |
| * The HIF implementation that requires a yield count must call HIFAckInterrupt() when it is prepared |
| * to process interrupts again. |
| * |
| * HIF_CONFIGURE_QUERY_SCATTER_REQUEST_SUPPORT |
| * input : none |
| * output : HIF_DEVICE_SCATTER_SUPPORT_INFO |
| * note: This query checks if the HIF layer implements the SCATTER request interface. Scatter requests |
| * allows upper layers to submit mailbox I/O operations using a list of buffers. This is useful for |
| * multi-message transfers that can better utilize the bus interconnect. |
| * |
| * |
| * HIF_DEVICE_GET_OS_DEVICE |
| * intput : none |
| * output : HIF_DEVICE_OS_DEVICE_INFO; |
| * note: On some operating systems, the HIF layer has a parent device object for the bus. This object |
| * may be required to register certain types of logical devices. |
| * |
| * HIF_DEVICE_DEBUG_BUS_STATE |
| * input : none |
| * output : none |
| * note: This configure option triggers the HIF interface to dump as much bus interface state. This |
| * configuration request is optional (No-OP on some HIF implementations) |
| * |
| */ |
| |
| typedef struct { |
| u32 ExtendedAddress; /* extended address for larger writes */ |
| u32 ExtendedSize; |
| } HIF_MBOX_PROPERTIES; |
| |
| #define HIF_MBOX_FLAG_NO_BUNDLING (1 << 0) /* do not allow bundling over the mailbox */ |
| |
| typedef enum _MBOX_BUF_IF_TYPE { |
| MBOX_BUS_IF_SDIO = 0, |
| MBOX_BUS_IF_SPI = 1, |
| } MBOX_BUF_IF_TYPE; |
| |
| typedef struct { |
| u32 MboxAddresses[4]; /* must be first element for legacy HIFs that return the address in |
| and ARRAY of 32-bit words */ |
| |
| /* the following describe extended mailbox properties */ |
| HIF_MBOX_PROPERTIES MboxProp[4]; |
| /* if the HIF supports the GMbox extended address region it can report it |
| * here, some interfaces cannot support the GMBOX address range and not set this */ |
| u32 GMboxAddress; |
| u32 GMboxSize; |
| u32 Flags; /* flags to describe mbox behavior or usage */ |
| MBOX_BUF_IF_TYPE MboxBusIFType; /* mailbox bus interface type */ |
| } HIF_DEVICE_MBOX_INFO; |
| |
| typedef enum { |
| HIF_DEVICE_IRQ_SYNC_ONLY, /* for HIF implementations that require the DSR to process all |
| interrupts before returning */ |
| HIF_DEVICE_IRQ_ASYNC_SYNC, /* for HIF implementations that allow DSR to process interrupts |
| using ASYNC I/O (that is HIFAckInterrupt can be called at a |
| later time */ |
| } HIF_DEVICE_IRQ_PROCESSING_MODE; |
| |
| typedef enum { |
| HIF_DEVICE_POWER_UP, /* HIF layer should power up interface and/or module */ |
| HIF_DEVICE_POWER_DOWN, /* HIF layer should initiate bus-specific measures to minimize power */ |
| HIF_DEVICE_POWER_CUT /* HIF layer should initiate bus-specific AND/OR platform-specific measures |
| to completely power-off the module and associated hardware (i.e. cut power supplies) |
| */ |
| } HIF_DEVICE_POWER_CHANGE_TYPE; |
| |
| typedef struct { |
| int RecvPacketYieldCount; /* max number of packets to force DSR to return */ |
| } HIF_DEVICE_IRQ_YIELD_PARAMS; |
| |
| |
| typedef struct _HIF_SCATTER_ITEM { |
| u8 *pBuffer; /* CPU accessible address of buffer */ |
| int Length; /* length of transfer to/from this buffer */ |
| void *pCallerContexts[2]; /* space for caller to insert a context associated with this item */ |
| } HIF_SCATTER_ITEM; |
| |
| struct _HIF_SCATTER_REQ; |
| |
| typedef void ( *HIF_SCATTER_COMP_CB)(struct _HIF_SCATTER_REQ *); |
| |
| typedef enum _HIF_SCATTER_METHOD { |
| HIF_SCATTER_NONE = 0, |
| HIF_SCATTER_DMA_REAL, /* Real SG support no restrictions */ |
| HIF_SCATTER_DMA_BOUNCE, /* Uses SG DMA but HIF layer uses an internal bounce buffer */ |
| } HIF_SCATTER_METHOD; |
| |
| typedef struct _HIF_SCATTER_REQ { |
| struct dl_list ListLink; /* link management */ |
| u32 Address; /* address for the read/write operation */ |
| u32 Request; /* request flags */ |
| u32 TotalLength; /* total length of entire transfer */ |
| u32 CallerFlags; /* caller specific flags can be stored here */ |
| HIF_SCATTER_COMP_CB CompletionRoutine; /* completion routine set by caller */ |
| int CompletionStatus; /* status of completion */ |
| void *Context; /* caller context for this request */ |
| int ValidScatterEntries; /* number of valid entries set by caller */ |
| HIF_SCATTER_METHOD ScatterMethod; /* scatter method handled by HIF */ |
| void *HIFPrivate[4]; /* HIF private area */ |
| u8 *pScatterBounceBuffer; /* bounce buffer for upper layers to copy to/from */ |
| HIF_SCATTER_ITEM ScatterList[1]; /* start of scatter list */ |
| } HIF_SCATTER_REQ; |
| |
| typedef HIF_SCATTER_REQ * ( *HIF_ALLOCATE_SCATTER_REQUEST)(HIF_DEVICE *device); |
| typedef void ( *HIF_FREE_SCATTER_REQUEST)(HIF_DEVICE *device, HIF_SCATTER_REQ *request); |
| typedef int ( *HIF_READWRITE_SCATTER)(HIF_DEVICE *device, HIF_SCATTER_REQ *request); |
| |
| typedef struct _HIF_DEVICE_SCATTER_SUPPORT_INFO { |
| /* information returned from HIF layer */ |
| HIF_ALLOCATE_SCATTER_REQUEST pAllocateReqFunc; |
| HIF_FREE_SCATTER_REQUEST pFreeReqFunc; |
| HIF_READWRITE_SCATTER pReadWriteScatterFunc; |
| int MaxScatterEntries; |
| int MaxTransferSizePerScatterReq; |
| } HIF_DEVICE_SCATTER_SUPPORT_INFO; |
| |
| typedef struct { |
| void *pOSDevice; |
| } HIF_DEVICE_OS_DEVICE_INFO; |
| |
| #define HIF_MAX_DEVICES 1 |
| |
| struct htc_callbacks { |
| void *context; /* context to pass to the dsrhandler |
| note : rwCompletionHandler is provided the context passed to HIFReadWrite */ |
| int (* rwCompletionHandler)(void *rwContext, int status); |
| int (* dsrHandler)(void *context); |
| }; |
| |
| typedef struct osdrv_callbacks { |
| void *context; /* context to pass for all callbacks except deviceRemovedHandler |
| the deviceRemovedHandler is only called if the device is claimed */ |
| int (* deviceInsertedHandler)(void *context, void *hif_handle); |
| int (* deviceRemovedHandler)(void *claimedContext, void *hif_handle); |
| int (* deviceSuspendHandler)(void *context); |
| int (* deviceResumeHandler)(void *context); |
| int (* deviceWakeupHandler)(void *context); |
| int (* devicePowerChangeHandler)(void *context, HIF_DEVICE_POWER_CHANGE_TYPE config); |
| } OSDRV_CALLBACKS; |
| |
| #define HIF_OTHER_EVENTS (1 << 0) /* other interrupts (non-Recv) are pending, host |
| needs to read the register table to figure out what */ |
| #define HIF_RECV_MSG_AVAIL (1 << 1) /* pending recv packet */ |
| |
| typedef struct _HIF_PENDING_EVENTS_INFO { |
| u32 Events; |
| u32 LookAhead; |
| u32 AvailableRecvBytes; |
| #ifdef THREAD_X |
| u32 Polling; |
| u32 INT_CAUSE_REG; |
| #endif |
| } HIF_PENDING_EVENTS_INFO; |
| |
| /* function to get pending events , some HIF modules use special mechanisms |
| * to detect packet available and other interrupts */ |
| typedef int ( *HIF_PENDING_EVENTS_FUNC)(HIF_DEVICE *device, |
| HIF_PENDING_EVENTS_INFO *pEvents, |
| void *AsyncContext); |
| |
| #define HIF_MASK_RECV true |
| #define HIF_UNMASK_RECV false |
| /* function to mask recv events */ |
| typedef int ( *HIF_MASK_UNMASK_RECV_EVENT)(HIF_DEVICE *device, |
| bool Mask, |
| void *AsyncContext); |
| |
| |
| /* |
| * This API is used to perform any global initialization of the HIF layer |
| * and to set OS driver callbacks (i.e. insertion/removal) to the HIF layer |
| * |
| */ |
| int HIFInit(OSDRV_CALLBACKS *callbacks); |
| |
| /* This API claims the HIF device and provides a context for handling removal. |
| * The device removal callback is only called when the OSDRV layer claims |
| * a device. The claimed context must be non-NULL */ |
| void HIFClaimDevice(HIF_DEVICE *device, void *claimedContext); |
| /* release the claimed device */ |
| void HIFReleaseDevice(HIF_DEVICE *device); |
| |
| /* This API allows the HTC layer to attach to the HIF device */ |
| int HIFAttachHTC(HIF_DEVICE *device, HTC_CALLBACKS *callbacks); |
| /* This API detaches the HTC layer from the HIF device */ |
| void HIFDetachHTC(HIF_DEVICE *device); |
| |
| /* |
| * This API is used to provide the read/write interface over the specific bus |
| * interface. |
| * address - Starting address in the AR6000's address space. For mailbox |
| * writes, it refers to the start of the mbox boundary. It should |
| * be ensured that the last byte falls on the mailbox's EOM. For |
| * mailbox reads, it refers to the end of the mbox boundary. |
| * buffer - Pointer to the buffer containg the data to be transmitted or |
| * received. |
| * length - Amount of data to be transmitted or received. |
| * request - Characterizes the attributes of the command. |
| */ |
| int |
| HIFReadWrite(HIF_DEVICE *device, |
| u32 address, |
| u8 *buffer, |
| u32 length, |
| u32 request, |
| void *context); |
| |
| /* |
| * This can be initiated from the unload driver context when the OSDRV layer has no more use for |
| * the device. |
| */ |
| void HIFShutDownDevice(HIF_DEVICE *device); |
| |
| /* |
| * This should translate to an acknowledgment to the bus driver indicating that |
| * the previous interrupt request has been serviced and the all the relevant |
| * sources have been cleared. HTC is ready to process more interrupts. |
| * This should prevent the bus driver from raising an interrupt unless the |
| * previous one has been serviced and acknowledged using the previous API. |
| */ |
| void HIFAckInterrupt(HIF_DEVICE *device); |
| |
| void HIFMaskInterrupt(HIF_DEVICE *device); |
| |
| void HIFUnMaskInterrupt(HIF_DEVICE *device); |
| |
| #ifdef THREAD_X |
| /* |
| * This set of functions are to be used by the bus driver to notify |
| * the HIF module about various events. |
| * These are not implemented if the bus driver provides an alternative |
| * way for this notification though callbacks for instance. |
| */ |
| int HIFInsertEventNotify(void); |
| |
| int HIFRemoveEventNotify(void); |
| |
| int HIFIRQEventNotify(void); |
| |
| int HIFRWCompleteEventNotify(void); |
| #endif |
| |
| int |
| HIFConfigureDevice(HIF_DEVICE *device, HIF_DEVICE_CONFIG_OPCODE opcode, |
| void *config, u32 configLen); |
| |
| /* |
| * This API wait for the remaining MBOX messages to be drained |
| * This should be moved to HTC AR6K layer |
| */ |
| int hifWaitForPendingRecv(HIF_DEVICE *device); |
| |
| #ifdef __cplusplus |
| } |
| #endif |
| |
| #endif /* _HIF_H_ */ |