Merge tag 'for-v4.9' of git://git.kernel.org/pub/scm/linux/kernel/git/sre/linux-power-supply
Pull power supply and reset updates from Sebastian Reichel:
- move power supply drivers to drivers/power/supply
- unify location of power supply DT documentation
- tps65217-charger: IRQ support
- act8945a-charger: misc. cleanups & improvements
- sbs-battery cleanup
- fix users of deprecated create_singlethread_workqueue()
- misc fixes.
* tag 'for-v4.9' of git://git.kernel.org/pub/scm/linux/kernel/git/sre/linux-power-supply: (46 commits)
power: supply: bq27xxx_battery: allow kernel poll_interval parameter runtime update
power: supply: sbs-battery: Cleanup removal of chip->pdata
power: reset: st: Remove obsolete platforms from dt doc
power: reset: st-poweroff: Remove obsolete platforms.
power: reset: zx-reboot: Unmap region obtained by of_iomap
power: reset: xgene-reboot: Unmap region obtained by of_iomap
power: supply: ab8500: cleanup with list_first_entry_or_null()
power: reset: add in missing white space in error message text
sbs-battery: make writes to ManufacturerAccess optional
power: bq24257: Fix use of uninitialized pointer bq->charger
power: supply: sbs-battery: simplify DT parsing
power: supply: bq24735-charger: Request status GPIO with initial input setup
power: supply: sbs-battery: Use gpio_desc and sleeping calls for battery detect
power: supply: act8945a_charger: Add max current property
power: supply: act8945a_charger: Add capacity level property
doc: bindings: power: act8945a-charger: Update properties.
power: supply: act8945a_charger: Fix the power supply type
power: supply: act8945a_charger: Add status change update support
power: supply: act8945a_charger: Improve state handling
power: supply: act8945a_charger: Remove "battery_temperature"
...
diff --git a/CREDITS b/CREDITS
index 936f05a..df0a50e 100644
--- a/CREDITS
+++ b/CREDITS
@@ -1090,6 +1090,10 @@
S: Pleasanton, CA 94588
S: USA
+N: Dmitry Eremin-Solenikov
+E: dbaryshkov@gmail.com
+D: Power Supply Maintainer from v3.14 - v3.15
+
N: Doug Evans
E: dje@cygnus.com
D: Wrote Xenix FS (part of standard kernel since 0.99.15)
diff --git a/Documentation/ABI/testing/sysfs-class-power b/Documentation/ABI/testing/sysfs-class-power
index fa05719..f85ce9e 100644
--- a/Documentation/ABI/testing/sysfs-class-power
+++ b/Documentation/ABI/testing/sysfs-class-power
@@ -22,7 +22,7 @@
What: /sys/class/power_supply/max14577-charger/device/fast_charge_timer
Date: October 2014
KernelVersion: 3.18.0
-Contact: Krzysztof Kozlowski <k.kozlowski@samsung.com>
+Contact: Krzysztof Kozlowski <krzk@kernel.org>
Description:
This entry shows and sets the maximum time the max14577
charger operates in fast-charge mode. When the timer expires
@@ -36,7 +36,7 @@
What: /sys/class/power_supply/max77693-charger/device/fast_charge_timer
Date: January 2015
KernelVersion: 3.19.0
-Contact: Krzysztof Kozlowski <k.kozlowski@samsung.com>
+Contact: Krzysztof Kozlowski <krzk@kernel.org>
Description:
This entry shows and sets the maximum time the max77693
charger operates in fast-charge mode. When the timer expires
@@ -50,7 +50,7 @@
What: /sys/class/power_supply/max77693-charger/device/top_off_threshold_current
Date: January 2015
KernelVersion: 3.19.0
-Contact: Krzysztof Kozlowski <k.kozlowski@samsung.com>
+Contact: Krzysztof Kozlowski <krzk@kernel.org>
Description:
This entry shows and sets the charging current threshold for
entering top-off charging mode. When charging current in fast
@@ -65,7 +65,7 @@
What: /sys/class/power_supply/max77693-charger/device/top_off_timer
Date: January 2015
KernelVersion: 3.19.0
-Contact: Krzysztof Kozlowski <k.kozlowski@samsung.com>
+Contact: Krzysztof Kozlowski <krzk@kernel.org>
Description:
This entry shows and sets the maximum time the max77693
charger operates in top-off charge mode. When the timer expires
diff --git a/Documentation/devicetree/bindings/power/act8945a-charger.txt b/Documentation/devicetree/bindings/power/act8945a-charger.txt
deleted file mode 100644
index bea254c..0000000
--- a/Documentation/devicetree/bindings/power/act8945a-charger.txt
+++ /dev/null
@@ -1,35 +0,0 @@
-Device-Tree bindings for charger of Active-semi ACT8945A Multi-Function Device
-
-Required properties:
- - compatible: "active-semi,act8945a", please refer to ../mfd/act8945a.txt.
- - active-semi,chglev-gpios: charge current level phandle with args
- as described in ../gpio/gpio.txt.
-
-Optional properties:
- - active-semi,check-battery-temperature: boolean to check the battery
- temperature or not.
- - active-semi,input-voltage-threshold-microvolt: unit: mV;
- Specifies the charger's input over-voltage threshold value;
- The value can be: 6600, 7000, 7500, 8000; default: 6600
- - active-semi,precondition-timeout: unit: minutes;
- Specifies the charger's PRECONDITION safety timer setting value;
- The value can be: 40, 60, 80, 0; If 0, it means to disable this timer;
- default: 40.
- - active-semi,total-timeout: unit: hours;
- Specifies the charger's total safety timer setting value;
- The value can be: 3, 4, 5, 0; If 0, it means to disable this timer;
- default: 3.
-
-Example:
- pmic@5b {
- compatible = "active-semi,act8945a";
- reg = <0x5b>;
- status = "okay";
-
- pinctrl-names = "default";
- pinctrl-0 = <&pinctrl_charger_chglev>;
- active-semi,chglev-gpios = <&pioA 12 GPIO_ACTIVE_HIGH>;
- active-semi,input-voltage-threshold-microvolt = <6600>;
- active-semi,precondition-timeout = <40>;
- active-semi,total-timeout = <3>;
- };
diff --git a/Documentation/devicetree/bindings/power_supply/axxia-reset.txt b/Documentation/devicetree/bindings/power/reset/axxia-reset.txt
similarity index 100%
rename from Documentation/devicetree/bindings/power_supply/axxia-reset.txt
rename to Documentation/devicetree/bindings/power/reset/axxia-reset.txt
diff --git a/Documentation/devicetree/bindings/power_supply/imx-snvs-poweroff.txt b/Documentation/devicetree/bindings/power/reset/imx-snvs-poweroff.txt
similarity index 100%
rename from Documentation/devicetree/bindings/power_supply/imx-snvs-poweroff.txt
rename to Documentation/devicetree/bindings/power/reset/imx-snvs-poweroff.txt
diff --git a/Documentation/devicetree/bindings/power_supply/msm-poweroff.txt b/Documentation/devicetree/bindings/power/reset/msm-poweroff.txt
similarity index 100%
rename from Documentation/devicetree/bindings/power_supply/msm-poweroff.txt
rename to Documentation/devicetree/bindings/power/reset/msm-poweroff.txt
diff --git a/Documentation/devicetree/bindings/power_supply/qnap-poweroff.txt b/Documentation/devicetree/bindings/power/reset/qnap-poweroff.txt
similarity index 100%
rename from Documentation/devicetree/bindings/power_supply/qnap-poweroff.txt
rename to Documentation/devicetree/bindings/power/reset/qnap-poweroff.txt
diff --git a/Documentation/devicetree/bindings/power_supply/restart-poweroff.txt b/Documentation/devicetree/bindings/power/reset/restart-poweroff.txt
similarity index 100%
rename from Documentation/devicetree/bindings/power_supply/restart-poweroff.txt
rename to Documentation/devicetree/bindings/power/reset/restart-poweroff.txt
diff --git a/Documentation/devicetree/bindings/power/reset/st-reset.txt b/Documentation/devicetree/bindings/power/reset/st-reset.txt
index 809af54..83734dc 100644
--- a/Documentation/devicetree/bindings/power/reset/st-reset.txt
+++ b/Documentation/devicetree/bindings/power/reset/st-reset.txt
@@ -1,11 +1,12 @@
*Device-Tree bindings for ST SW reset functionality
Required properties:
-- compatible: should be "st,<chip>-restart".
+- compatible: should be "stih407-restart".
- st,syscfg: should be a phandle of the syscfg node.
Example node:
restart {
- compatible = "st,stih416-restart";
- st,syscfg = <&syscfg_sbc>;
+ compatible = "st,stih407-restart";
+ st,syscfg = <&syscfg_sbc_reg>;
+ status = "okay";
};
diff --git a/Documentation/devicetree/bindings/power_supply/ab8500/btemp.txt b/Documentation/devicetree/bindings/power/supply/ab8500/btemp.txt
similarity index 100%
rename from Documentation/devicetree/bindings/power_supply/ab8500/btemp.txt
rename to Documentation/devicetree/bindings/power/supply/ab8500/btemp.txt
diff --git a/Documentation/devicetree/bindings/power_supply/ab8500/chargalg.txt b/Documentation/devicetree/bindings/power/supply/ab8500/chargalg.txt
similarity index 100%
rename from Documentation/devicetree/bindings/power_supply/ab8500/chargalg.txt
rename to Documentation/devicetree/bindings/power/supply/ab8500/chargalg.txt
diff --git a/Documentation/devicetree/bindings/power_supply/ab8500/charger.txt b/Documentation/devicetree/bindings/power/supply/ab8500/charger.txt
similarity index 100%
rename from Documentation/devicetree/bindings/power_supply/ab8500/charger.txt
rename to Documentation/devicetree/bindings/power/supply/ab8500/charger.txt
diff --git a/Documentation/devicetree/bindings/power_supply/ab8500/fg.txt b/Documentation/devicetree/bindings/power/supply/ab8500/fg.txt
similarity index 100%
rename from Documentation/devicetree/bindings/power_supply/ab8500/fg.txt
rename to Documentation/devicetree/bindings/power/supply/ab8500/fg.txt
diff --git a/Documentation/devicetree/bindings/power/supply/act8945a-charger.txt b/Documentation/devicetree/bindings/power/supply/act8945a-charger.txt
new file mode 100644
index 0000000..de78d76
--- /dev/null
+++ b/Documentation/devicetree/bindings/power/supply/act8945a-charger.txt
@@ -0,0 +1,48 @@
+Device-Tree bindings for charger of Active-semi ACT8945A Multi-Function Device
+
+Required properties:
+ - compatible: "active-semi,act8945a-charger".
+ - active-semi,chglev-gpios: charge current level phandle with args
+ as described in ../gpio/gpio.txt.
+ - active-semi,lbo-gpios: specify the low battery voltage detect phandle
+ with args as as described in ../gpio/gpio.txt.
+ - interrupts: <a b> where a is the interrupt number and b is a
+ field that represents an encoding of the sense and level
+ information for the interrupt.
+ - interrupt-parent: the phandle for the interrupt controller that
+ services interrupts for this device.
+
+Optional properties:
+ - active-semi,input-voltage-threshold-microvolt: unit: mV;
+ Specifies the charger's input over-voltage threshold value;
+ The value can be: 6600, 7000, 7500, 8000; default: 6600
+ - active-semi,precondition-timeout: unit: minutes;
+ Specifies the charger's PRECONDITION safety timer setting value;
+ The value can be: 40, 60, 80, 0; If 0, it means to disable this timer;
+ default: 40.
+ - active-semi,total-timeout: unit: hours;
+ Specifies the charger's total safety timer setting value;
+ The value can be: 3, 4, 5, 0; If 0, it means to disable this timer;
+ default: 3.
+
+Example:
+ pmic@5b {
+ compatible = "active-semi,act8945a";
+ reg = <0x5b>;
+ status = "okay";
+
+ charger {
+ compatible = "active-semi,act8945a-charger";
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_charger_chglev &pinctrl_charger_lbo &pinctrl_charger_irq>;
+ interrupt-parent = <&pioA>;
+ interrupts = <45 GPIO_ACTIVE_LOW>;
+
+ active-semi,chglev-gpios = <&pioA 12 GPIO_ACTIVE_HIGH>;
+ active-semi,lbo-gpios = <&pioA 72 GPIO_ACTIVE_LOW>;
+ active-semi,input-voltage-threshold-microvolt = <6600>;
+ active-semi,precondition-timeout = <40>;
+ active-semi,total-timeout = <3>;
+ status = "okay";
+ };
+ };
diff --git a/Documentation/devicetree/bindings/power_supply/axp20x_usb_power.txt b/Documentation/devicetree/bindings/power/supply/axp20x_usb_power.txt
similarity index 100%
rename from Documentation/devicetree/bindings/power_supply/axp20x_usb_power.txt
rename to Documentation/devicetree/bindings/power/supply/axp20x_usb_power.txt
diff --git a/Documentation/devicetree/bindings/power/bq2415x.txt b/Documentation/devicetree/bindings/power/supply/bq2415x.txt
similarity index 100%
rename from Documentation/devicetree/bindings/power/bq2415x.txt
rename to Documentation/devicetree/bindings/power/supply/bq2415x.txt
diff --git a/Documentation/devicetree/bindings/power/bq24257.txt b/Documentation/devicetree/bindings/power/supply/bq24257.txt
similarity index 100%
rename from Documentation/devicetree/bindings/power/bq24257.txt
rename to Documentation/devicetree/bindings/power/supply/bq24257.txt
diff --git a/Documentation/devicetree/bindings/power/bq25890.txt b/Documentation/devicetree/bindings/power/supply/bq25890.txt
similarity index 100%
rename from Documentation/devicetree/bindings/power/bq25890.txt
rename to Documentation/devicetree/bindings/power/supply/bq25890.txt
diff --git a/Documentation/devicetree/bindings/power_supply/charger-manager.txt b/Documentation/devicetree/bindings/power/supply/charger-manager.txt
similarity index 100%
rename from Documentation/devicetree/bindings/power_supply/charger-manager.txt
rename to Documentation/devicetree/bindings/power/supply/charger-manager.txt
diff --git a/Documentation/devicetree/bindings/power/da9150-charger.txt b/Documentation/devicetree/bindings/power/supply/da9150-charger.txt
similarity index 100%
rename from Documentation/devicetree/bindings/power/da9150-charger.txt
rename to Documentation/devicetree/bindings/power/supply/da9150-charger.txt
diff --git a/Documentation/devicetree/bindings/power/da9150-fg.txt b/Documentation/devicetree/bindings/power/supply/da9150-fg.txt
similarity index 100%
rename from Documentation/devicetree/bindings/power/da9150-fg.txt
rename to Documentation/devicetree/bindings/power/supply/da9150-fg.txt
diff --git a/Documentation/devicetree/bindings/power_supply/gpio-charger.txt b/Documentation/devicetree/bindings/power/supply/gpio-charger.txt
similarity index 100%
rename from Documentation/devicetree/bindings/power_supply/gpio-charger.txt
rename to Documentation/devicetree/bindings/power/supply/gpio-charger.txt
diff --git a/Documentation/devicetree/bindings/power/isp1704.txt b/Documentation/devicetree/bindings/power/supply/isp1704.txt
similarity index 100%
rename from Documentation/devicetree/bindings/power/isp1704.txt
rename to Documentation/devicetree/bindings/power/supply/isp1704.txt
diff --git a/Documentation/devicetree/bindings/power_supply/lp8727_charger.txt b/Documentation/devicetree/bindings/power/supply/lp8727_charger.txt
similarity index 100%
rename from Documentation/devicetree/bindings/power_supply/lp8727_charger.txt
rename to Documentation/devicetree/bindings/power/supply/lp8727_charger.txt
diff --git a/Documentation/devicetree/bindings/power/ltc2941.txt b/Documentation/devicetree/bindings/power/supply/ltc2941.txt
similarity index 100%
rename from Documentation/devicetree/bindings/power/ltc2941.txt
rename to Documentation/devicetree/bindings/power/supply/ltc2941.txt
diff --git a/Documentation/devicetree/bindings/power_supply/max17042_battery.txt b/Documentation/devicetree/bindings/power/supply/max17042_battery.txt
similarity index 100%
rename from Documentation/devicetree/bindings/power_supply/max17042_battery.txt
rename to Documentation/devicetree/bindings/power/supply/max17042_battery.txt
diff --git a/Documentation/devicetree/bindings/power_supply/max8925_batter.txt b/Documentation/devicetree/bindings/power/supply/max8925_batter.txt
similarity index 100%
rename from Documentation/devicetree/bindings/power_supply/max8925_batter.txt
rename to Documentation/devicetree/bindings/power/supply/max8925_batter.txt
diff --git a/Documentation/devicetree/bindings/power_supply/olpc_battery.txt b/Documentation/devicetree/bindings/power/supply/olpc_battery.txt
similarity index 100%
rename from Documentation/devicetree/bindings/power_supply/olpc_battery.txt
rename to Documentation/devicetree/bindings/power/supply/olpc_battery.txt
diff --git a/Documentation/devicetree/bindings/power_supply/power_supply.txt b/Documentation/devicetree/bindings/power/supply/power_supply.txt
similarity index 100%
rename from Documentation/devicetree/bindings/power_supply/power_supply.txt
rename to Documentation/devicetree/bindings/power/supply/power_supply.txt
diff --git a/Documentation/devicetree/bindings/power/qcom,coincell-charger.txt b/Documentation/devicetree/bindings/power/supply/qcom,coincell-charger.txt
similarity index 100%
rename from Documentation/devicetree/bindings/power/qcom,coincell-charger.txt
rename to Documentation/devicetree/bindings/power/supply/qcom,coincell-charger.txt
diff --git a/Documentation/devicetree/bindings/power_supply/qcom_smbb.txt b/Documentation/devicetree/bindings/power/supply/qcom_smbb.txt
similarity index 100%
rename from Documentation/devicetree/bindings/power_supply/qcom_smbb.txt
rename to Documentation/devicetree/bindings/power/supply/qcom_smbb.txt
diff --git a/Documentation/devicetree/bindings/power/rt9455_charger.txt b/Documentation/devicetree/bindings/power/supply/rt9455_charger.txt
similarity index 100%
rename from Documentation/devicetree/bindings/power/rt9455_charger.txt
rename to Documentation/devicetree/bindings/power/supply/rt9455_charger.txt
diff --git a/Documentation/devicetree/bindings/power/rx51-battery.txt b/Documentation/devicetree/bindings/power/supply/rx51-battery.txt
similarity index 100%
rename from Documentation/devicetree/bindings/power/rx51-battery.txt
rename to Documentation/devicetree/bindings/power/supply/rx51-battery.txt
diff --git a/Documentation/devicetree/bindings/power_supply/sbs_sbs-battery.txt b/Documentation/devicetree/bindings/power/supply/sbs_sbs-battery.txt
similarity index 100%
rename from Documentation/devicetree/bindings/power_supply/sbs_sbs-battery.txt
rename to Documentation/devicetree/bindings/power/supply/sbs_sbs-battery.txt
diff --git a/Documentation/devicetree/bindings/power_supply/ti,bq24735.txt b/Documentation/devicetree/bindings/power/supply/ti,bq24735.txt
similarity index 100%
rename from Documentation/devicetree/bindings/power_supply/ti,bq24735.txt
rename to Documentation/devicetree/bindings/power/supply/ti,bq24735.txt
diff --git a/Documentation/devicetree/bindings/power_supply/tps65090.txt b/Documentation/devicetree/bindings/power/supply/tps65090.txt
similarity index 100%
rename from Documentation/devicetree/bindings/power_supply/tps65090.txt
rename to Documentation/devicetree/bindings/power/supply/tps65090.txt
diff --git a/Documentation/devicetree/bindings/power_supply/tps65217_charger.txt b/Documentation/devicetree/bindings/power/supply/tps65217_charger.txt
similarity index 100%
rename from Documentation/devicetree/bindings/power_supply/tps65217_charger.txt
rename to Documentation/devicetree/bindings/power/supply/tps65217_charger.txt
diff --git a/Documentation/devicetree/bindings/power/twl-charger.txt b/Documentation/devicetree/bindings/power/supply/twl-charger.txt
similarity index 100%
rename from Documentation/devicetree/bindings/power/twl-charger.txt
rename to Documentation/devicetree/bindings/power/supply/twl-charger.txt
diff --git a/Documentation/driver-model/devres.txt b/Documentation/driver-model/devres.txt
index 75bc5b8..1670708 100644
--- a/Documentation/driver-model/devres.txt
+++ b/Documentation/driver-model/devres.txt
@@ -346,6 +346,10 @@
devm_pinctrl_register()
devm_pinctrl_unregister()
+POWER
+ devm_reboot_mode_register()
+ devm_reboot_mode_unregister()
+
PWM
devm_pwm_get()
devm_pwm_put()
diff --git a/Documentation/power/power_supply_class.txt b/Documentation/power/power_supply_class.txt
index 82dacc0..0c72588 100644
--- a/Documentation/power/power_supply_class.txt
+++ b/Documentation/power/power_supply_class.txt
@@ -39,8 +39,8 @@
manner. Results for different power supplies and machines are also directly
comparable.
-See drivers/power/ds2760_battery.c and drivers/power/pda_power.c for the
-example how to declare and handle attributes.
+See drivers/power/supply/ds2760_battery.c and drivers/power/supply/pda_power.c
+for the example how to declare and handle attributes.
Units
diff --git a/MAINTAINERS b/MAINTAINERS
index 464437d..40f4629 100644
--- a/MAINTAINERS
+++ b/MAINTAINERS
@@ -3784,8 +3784,8 @@
F: drivers/mfd/da903x.c
F: drivers/mfd/da90??-*.c
F: drivers/mfd/da91??-*.c
-F: drivers/power/da9052-battery.c
-F: drivers/power/da91??-*.c
+F: drivers/power/supply/da9052-battery.c
+F: drivers/power/supply/da91??-*.c
F: drivers/regulator/da903x.c
F: drivers/regulator/da9???-regulator.[ch]
F: drivers/rtc/rtc-da90??.c
@@ -7579,8 +7579,8 @@
M: Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com>
L: linux-pm@vger.kernel.org
S: Supported
-F: drivers/power/max14577_charger.c
-F: drivers/power/max77693_charger.c
+F: drivers/power/supply/max14577_charger.c
+F: drivers/power/supply/max77693_charger.c
MAXIM MAX77802 MULTIFUNCTION PMIC DEVICE DRIVERS
M: Javier Martinez Canillas <javier@osg.samsung.com>
@@ -8486,11 +8486,11 @@
F: include/linux/power/bq2415x_charger.h
F: include/linux/power/bq27xxx_battery.h
F: include/linux/power/isp1704_charger.h
-F: drivers/power/bq2415x_charger.c
-F: drivers/power/bq27xxx_battery.c
-F: drivers/power/bq27xxx_battery_i2c.c
-F: drivers/power/isp1704_charger.c
-F: drivers/power/rx51_battery.c
+F: drivers/power/supply/bq2415x_charger.c
+F: drivers/power/supply/bq27xxx_battery.c
+F: drivers/power/supply/bq27xxx_battery_i2c.c
+F: drivers/power/supply/isp1704_charger.c
+F: drivers/power/supply/rx51_battery.c
NTB DRIVER CORE
M: Jon Mason <jdmason@kudzu.us>
@@ -9490,16 +9490,12 @@
POWER SUPPLY CLASS/SUBSYSTEM and DRIVERS
M: Sebastian Reichel <sre@kernel.org>
-M: Dmitry Eremin-Solenikov <dbaryshkov@gmail.com>
-M: David Woodhouse <dwmw2@infradead.org>
L: linux-pm@vger.kernel.org
-T: git git://git.infradead.org/battery-2.6.git
+T: git git://git.kernel.org/pub/scm/linux/kernel/git/sre/linux-power-supply.git
S: Maintained
-F: Documentation/devicetree/bindings/power/
-F: Documentation/devicetree/bindings/power_supply/
+F: Documentation/devicetree/bindings/power/supply/
F: include/linux/power_supply.h
-F: drivers/power/
-X: drivers/power/avs/
+F: drivers/power/supply/
POWER STATE COORDINATION INTERFACE (PSCI)
M: Mark Rutland <mark.rutland@arm.com>
@@ -10514,8 +10510,8 @@
TI BQ27XXX POWER SUPPLY DRIVER
R: Andrew F. Davis <afd@ti.com>
F: include/linux/power/bq27xxx_battery.h
-F: drivers/power/bq27xxx_battery.c
-F: drivers/power/bq27xxx_battery_i2c.c
+F: drivers/power/supply/bq27xxx_battery.c
+F: drivers/power/supply/bq27xxx_battery_i2c.c
TIMEKEEPING, CLOCKSOURCE CORE, NTP, ALARMTIMER
M: John Stultz <john.stultz@linaro.org>
@@ -11512,6 +11508,14 @@
S: Supported
F: drivers/mfd/syscon.c
+SYSTEM RESET/SHUTDOWN DRIVERS
+M: Sebastian Reichel <sre@kernel.org>
+L: linux-pm@vger.kernel.org
+T: git git://git.kernel.org/pub/scm/linux/kernel/git/sre/linux-power-supply.git
+S: Maintained
+F: Documentation/devicetree/bindings/power/reset/
+F: drivers/power/reset/
+
SYSV FILESYSTEM
M: Christoph Hellwig <hch@infradead.org>
S: Maintained
@@ -11860,7 +11864,7 @@
TI LP8727 CHARGER DRIVER
M: Milo Kim <milo.kim@ti.com>
S: Maintained
-F: drivers/power/lp8727_charger.c
+F: drivers/power/supply/lp8727_charger.c
F: include/linux/platform_data/lp8727.h
TI LP8788 MFD DRIVER
@@ -11869,7 +11873,7 @@
F: drivers/iio/adc/lp8788_adc.c
F: drivers/leds/leds-lp8788.c
F: drivers/mfd/lp8788*.c
-F: drivers/power/lp8788-charger.c
+F: drivers/power/supply/lp8788-charger.c
F: drivers/regulator/lp8788-*.c
F: include/linux/mfd/lp8788*.h
@@ -12946,7 +12950,7 @@
F: drivers/mfd/arizona*
F: drivers/mfd/wm*.c
F: drivers/mfd/cs47l24*
-F: drivers/power/wm83*.c
+F: drivers/power/supply/wm83*.c
F: drivers/rtc/rtc-wm83*.c
F: drivers/regulator/wm8*.c
F: drivers/video/backlight/wm83*_bl.c
diff --git a/drivers/power/Kconfig b/drivers/power/Kconfig
index acd4a15..63454b5 100644
--- a/drivers/power/Kconfig
+++ b/drivers/power/Kconfig
@@ -1,517 +1,3 @@
-menuconfig POWER_SUPPLY
- bool "Power supply class support"
- help
- Say Y here to enable power supply class support. This allows
- power supply (batteries, AC, USB) monitoring by userspace
- via sysfs and uevent (if available) and/or APM kernel interface
- (if selected below).
-
-if POWER_SUPPLY
-
-config POWER_SUPPLY_DEBUG
- bool "Power supply debug"
- help
- Say Y here to enable debugging messages for power supply class
- and drivers.
-
-config PDA_POWER
- tristate "Generic PDA/phone power driver"
- depends on !S390
- help
- Say Y here to enable generic power driver for PDAs and phones with
- one or two external power supplies (AC/USB) connected to main and
- backup batteries, and optional builtin charger.
-
-config APM_POWER
- tristate "APM emulation for class batteries"
- depends on APM_EMULATION
- help
- Say Y here to enable support APM status emulation using
- battery class devices.
-
-config GENERIC_ADC_BATTERY
- tristate "Generic battery support using IIO"
- depends on IIO
- help
- Say Y here to enable support for the generic battery driver
- which uses IIO framework to read adc.
-
-config MAX8925_POWER
- tristate "MAX8925 battery charger support"
- depends on MFD_MAX8925
- help
- Say Y here to enable support for the battery charger in the Maxim
- MAX8925 PMIC.
-
-config WM831X_BACKUP
- tristate "WM831X backup battery charger support"
- depends on MFD_WM831X
- help
- Say Y here to enable support for the backup battery charger
- in the Wolfson Microelectronics WM831x PMICs.
-
-config WM831X_POWER
- tristate "WM831X PMU support"
- depends on MFD_WM831X
- help
- Say Y here to enable support for the power management unit
- provided by Wolfson Microelectronics WM831x PMICs.
-
-config WM8350_POWER
- tristate "WM8350 PMU support"
- depends on MFD_WM8350
- help
- Say Y here to enable support for the power management unit
- provided by the Wolfson Microelectronics WM8350 PMIC.
-
-config TEST_POWER
- tristate "Test power driver"
- help
- This driver is used for testing. It's safe to say M here.
-
-config BATTERY_88PM860X
- tristate "Marvell 88PM860x battery driver"
- depends on MFD_88PM860X
- help
- Say Y here to enable battery monitor for Marvell 88PM860x chip.
-
-config BATTERY_ACT8945A
- tristate "Active-semi ACT8945A charger driver"
- depends on MFD_ACT8945A || COMPILE_TEST
- help
- Say Y here to enable support for power supply provided by
- Active-semi ActivePath ACT8945A charger.
-
-config BATTERY_DS2760
- tristate "DS2760 battery driver (HP iPAQ & others)"
- depends on W1 && W1_SLAVE_DS2760
- help
- Say Y here to enable support for batteries with ds2760 chip.
-
-config BATTERY_DS2780
- tristate "DS2780 battery driver"
- depends on HAS_IOMEM
- select W1
- select W1_SLAVE_DS2780
- help
- Say Y here to enable support for batteries with ds2780 chip.
-
-config BATTERY_DS2781
- tristate "DS2781 battery driver"
- depends on HAS_IOMEM
- select W1
- select W1_SLAVE_DS2781
- help
- If you enable this you will have the DS2781 battery driver support.
-
- The battery monitor chip is used in many batteries/devices
- as the one who is responsible for charging/discharging/monitoring
- Li+ batteries.
-
- If you are unsure, say N.
-
-config BATTERY_DS2782
- tristate "DS2782/DS2786 standalone gas-gauge"
- depends on I2C
- help
- Say Y here to enable support for the DS2782/DS2786 standalone battery
- gas-gauge.
-
-config BATTERY_PMU
- tristate "Apple PMU battery"
- depends on PPC32 && ADB_PMU
- help
- Say Y here to expose battery information on Apple machines
- through the generic battery class.
-
-config BATTERY_OLPC
- tristate "One Laptop Per Child battery"
- depends on X86_32 && OLPC
- help
- Say Y to enable support for the battery on the OLPC laptop.
-
-config BATTERY_TOSA
- tristate "Sharp SL-6000 (tosa) battery"
- depends on MACH_TOSA && MFD_TC6393XB && TOUCHSCREEN_WM97XX
- help
- Say Y to enable support for the battery on the Sharp Zaurus
- SL-6000 (tosa) models.
-
-config BATTERY_COLLIE
- tristate "Sharp SL-5500 (collie) battery"
- depends on SA1100_COLLIE && MCP_UCB1200
- help
- Say Y to enable support for the battery on the Sharp Zaurus
- SL-5500 (collie) models.
-
-config BATTERY_IPAQ_MICRO
- tristate "iPAQ Atmel Micro ASIC battery driver"
- depends on MFD_IPAQ_MICRO
- help
- Choose this option if you want to monitor battery status on
- Compaq/HP iPAQ h3100 and h3600.
-
-config BATTERY_WM97XX
- bool "WM97xx generic battery driver"
- depends on TOUCHSCREEN_WM97XX=y
- help
- Say Y to enable support for battery measured by WM97xx aux port.
-
-config BATTERY_SBS
- tristate "SBS Compliant gas gauge"
- depends on I2C
- help
- Say Y to include support for SBS battery driver for SBS-compliant
- gas gauges.
-
-config BATTERY_BQ27XXX
- tristate "BQ27xxx battery driver"
- help
- Say Y here to enable support for batteries with BQ27xxx chips.
-
-config BATTERY_BQ27XXX_I2C
- tristate "BQ27xxx I2C support"
- depends on BATTERY_BQ27XXX
- depends on I2C
- default y
- help
- Say Y here to enable support for batteries with BQ27xxx chips
- connected over an I2C bus.
-
-config BATTERY_DA9030
- tristate "DA9030 battery driver"
- depends on PMIC_DA903X
- help
- Say Y here to enable support for batteries charger integrated into
- DA9030 PMIC.
-
-config BATTERY_DA9052
- tristate "Dialog DA9052 Battery"
- depends on PMIC_DA9052
- help
- Say Y here to enable support for batteries charger integrated into
- DA9052 PMIC.
-
-config CHARGER_DA9150
- tristate "Dialog Semiconductor DA9150 Charger support"
- depends on MFD_DA9150
- depends on DA9150_GPADC
- depends on IIO
- help
- Say Y here to enable support for charger unit of the DA9150
- Integrated Charger & Fuel-Gauge IC.
-
- This driver can also be built as a module. If so, the module will be
- called da9150-charger.
-
-config BATTERY_DA9150
- tristate "Dialog Semiconductor DA9150 Fuel Gauge support"
- depends on MFD_DA9150
- help
- Say Y here to enable support for the Fuel-Gauge unit of the DA9150
- Integrated Charger & Fuel-Gauge IC
-
- This driver can also be built as a module. If so, the module will be
- called da9150-fg.
-
-config AXP288_CHARGER
- tristate "X-Powers AXP288 Charger"
- depends on MFD_AXP20X && EXTCON_AXP288
- help
- Say yes here to have support X-Power AXP288 power management IC (PMIC)
- integrated charger.
-
-config AXP288_FUEL_GAUGE
- tristate "X-Powers AXP288 Fuel Gauge"
- depends on MFD_AXP20X && IIO
- help
- Say yes here to have support for X-Power power management IC (PMIC)
- Fuel Gauge. The device provides battery statistics and status
- monitoring as well as alerts for battery over/under voltage and
- over/under temperature.
-
-config BATTERY_MAX17040
- tristate "Maxim MAX17040 Fuel Gauge"
- depends on I2C
- help
- MAX17040 is fuel-gauge systems for lithium-ion (Li+) batteries
- in handheld and portable equipment. The MAX17040 is configured
- to operate with a single lithium cell
-
-config BATTERY_MAX17042
- tristate "Maxim MAX17042/17047/17050/8997/8966 Fuel Gauge"
- depends on I2C
- select REGMAP_I2C
- help
- MAX17042 is fuel-gauge systems for lithium-ion (Li+) batteries
- in handheld and portable equipment. The MAX17042 is configured
- to operate with a single lithium cell. MAX8997 and MAX8966 are
- multi-function devices that include fuel gauages that are compatible
- with MAX17042. This driver also supports max17047/50 chips which are
- improved version of max17042.
-
-config BATTERY_Z2
- tristate "Z2 battery driver"
- depends on I2C && MACH_ZIPIT2
- help
- Say Y to include support for the battery on the Zipit Z2.
-
-config BATTERY_S3C_ADC
- tristate "Battery driver for Samsung ADC based monitoring"
- depends on S3C_ADC
- help
- Say Y here to enable support for iPAQ h1930/h1940/rx1950 battery
-
-config BATTERY_TWL4030_MADC
- tristate "TWL4030 MADC battery driver"
- depends on TWL4030_MADC
- help
- Say Y here to enable this dumb driver for batteries managed
- through the TWL4030 MADC.
-
-config CHARGER_88PM860X
- tristate "Marvell 88PM860x Charger driver"
- depends on MFD_88PM860X && BATTERY_88PM860X
- help
- Say Y here to enable charger for Marvell 88PM860x chip.
-
-config CHARGER_PCF50633
- tristate "NXP PCF50633 MBC"
- depends on MFD_PCF50633
- help
- Say Y to include support for NXP PCF50633 Main Battery Charger.
-
-config BATTERY_JZ4740
- tristate "Ingenic JZ4740 battery"
- depends on MACH_JZ4740
- depends on MFD_JZ4740_ADC
- help
- Say Y to enable support for the battery on Ingenic JZ4740 based
- boards.
-
- This driver can be build as a module. If so, the module will be
- called jz4740-battery.
-
-config BATTERY_INTEL_MID
- tristate "Battery driver for Intel MID platforms"
- depends on INTEL_SCU_IPC && SPI
- help
- Say Y here to enable the battery driver on Intel MID
- platforms.
-
-config BATTERY_RX51
- tristate "Nokia RX-51 (N900) battery driver"
- depends on TWL4030_MADC
- help
- Say Y here to enable support for battery information on Nokia
- RX-51, also known as N900 tablet.
-
-config CHARGER_ISP1704
- tristate "ISP1704 USB Charger Detection"
- depends on USB_PHY
- depends on USB_GADGET || !USB_GADGET # if USB_GADGET=m, this can't be 'y'
- help
- Say Y to enable support for USB Charger Detection with
- ISP1707/ISP1704 USB transceivers.
-
-config CHARGER_MAX8903
- tristate "MAX8903 Battery DC-DC Charger for USB and Adapter Power"
- help
- Say Y to enable support for the MAX8903 DC-DC charger and sysfs.
- The driver supports controlling charger-enable and current-limit
- pins based on the status of charger connections with interrupt
- handlers.
-
-config CHARGER_TWL4030
- tristate "OMAP TWL4030 BCI charger driver"
- depends on IIO && TWL4030_CORE
- help
- Say Y here to enable support for TWL4030 Battery Charge Interface.
-
-config CHARGER_LP8727
- tristate "TI/National Semiconductor LP8727 charger driver"
- depends on I2C
- help
- Say Y here to enable support for LP8727 Charger Driver.
-
-config CHARGER_LP8788
- tristate "TI LP8788 charger driver"
- depends on MFD_LP8788
- depends on LP8788_ADC
- depends on IIO
- help
- Say Y to enable support for the LP8788 linear charger.
-
-config CHARGER_GPIO
- tristate "GPIO charger"
- depends on GPIOLIB || COMPILE_TEST
- help
- Say Y to include support for chargers which report their online status
- through a GPIO pin.
-
- This driver can be build as a module. If so, the module will be
- called gpio-charger.
-
-config CHARGER_MANAGER
- bool "Battery charger manager for multiple chargers"
- depends on REGULATOR
- select EXTCON
- help
- Say Y to enable charger-manager support, which allows multiple
- chargers attached to a battery and multiple batteries attached to a
- system. The charger-manager also can monitor charging status in
- runtime and in suspend-to-RAM by waking up the system periodically
- with help of suspend_again support.
-
-config CHARGER_MAX14577
- tristate "Maxim MAX14577/77836 battery charger driver"
- depends on MFD_MAX14577
- help
- Say Y to enable support for the battery charger control sysfs and
- platform data of MAX14577/77836 MUICs.
-
-config CHARGER_MAX77693
- tristate "Maxim MAX77693 battery charger driver"
- depends on MFD_MAX77693
- help
- Say Y to enable support for the Maxim MAX77693 battery charger.
-
-config CHARGER_MAX8997
- tristate "Maxim MAX8997/MAX8966 PMIC battery charger driver"
- depends on MFD_MAX8997 && REGULATOR_MAX8997
- help
- Say Y to enable support for the battery charger control sysfs and
- platform data of MAX8997/LP3974 PMICs.
-
-config CHARGER_MAX8998
- tristate "Maxim MAX8998/LP3974 PMIC battery charger driver"
- depends on MFD_MAX8998 && REGULATOR_MAX8998
- help
- Say Y to enable support for the battery charger control sysfs and
- platform data of MAX8998/LP3974 PMICs.
-
-config CHARGER_QCOM_SMBB
- tristate "Qualcomm Switch-Mode Battery Charger and Boost"
- depends on MFD_SPMI_PMIC || COMPILE_TEST
- depends on OF
- depends on EXTCON
- help
- Say Y to include support for the Switch-Mode Battery Charger and
- Boost (SMBB) hardware found in Qualcomm PM8941 PMICs. The charger
- is an integrated, single-cell lithium-ion battery charger. DT
- configuration is required for loading, see the devicetree
- documentation for more detail. The base name for this driver is
- 'pm8941_charger'.
-
-config CHARGER_BQ2415X
- tristate "TI BQ2415x battery charger driver"
- depends on I2C
- help
- Say Y to enable support for the TI BQ2415x battery charger
- PMICs.
-
- You'll need this driver to charge batteries on e.g. Nokia
- RX-51/N900.
-
-config CHARGER_BQ24190
- tristate "TI BQ24190 battery charger driver"
- depends on I2C
- depends on GPIOLIB || COMPILE_TEST
- help
- Say Y to enable support for the TI BQ24190 battery charger.
-
-config CHARGER_BQ24257
- tristate "TI BQ24250/24251/24257 battery charger driver"
- depends on I2C
- depends on GPIOLIB || COMPILE_TEST
- depends on REGMAP_I2C
- help
- Say Y to enable support for the TI BQ24250, BQ24251, and BQ24257 battery
- chargers.
-
-config CHARGER_BQ24735
- tristate "TI BQ24735 battery charger support"
- depends on I2C
- depends on GPIOLIB || COMPILE_TEST
- help
- Say Y to enable support for the TI BQ24735 battery charger.
-
-config CHARGER_BQ25890
- tristate "TI BQ25890 battery charger driver"
- depends on I2C
- depends on GPIOLIB || COMPILE_TEST
- select REGMAP_I2C
- help
- Say Y to enable support for the TI BQ25890 battery charger.
-
-config CHARGER_SMB347
- tristate "Summit Microelectronics SMB347 Battery Charger"
- depends on I2C
- select REGMAP_I2C
- help
- Say Y to include support for Summit Microelectronics SMB347
- Battery Charger.
-
-config CHARGER_TPS65090
- tristate "TPS65090 battery charger driver"
- depends on MFD_TPS65090
- help
- Say Y here to enable support for battery charging with TPS65090
- PMIC chips.
-
-config CHARGER_TPS65217
- tristate "TPS65217 battery charger driver"
- depends on MFD_TPS65217
- help
- Say Y here to enable support for battery charging with TPS65217
- PMIC chips.
-
-config BATTERY_GAUGE_LTC2941
- tristate "LTC2941/LTC2943 Battery Gauge Driver"
- depends on I2C
- help
- Say Y here to include support for LTC2941 and LTC2943 Battery
- Gauge IC. The driver reports the charge count continuously, and
- measures the voltage and temperature every 10 seconds.
-
-config AB8500_BM
- bool "AB8500 Battery Management Driver"
- depends on AB8500_CORE && AB8500_GPADC
- help
- Say Y to include support for AB8500 battery management.
-
-config BATTERY_GOLDFISH
- tristate "Goldfish battery driver"
- depends on GOLDFISH || COMPILE_TEST
- depends on HAS_IOMEM
- help
- Say Y to enable support for the battery and AC power in the
- Goldfish emulator.
-
-config BATTERY_RT5033
- tristate "RT5033 fuel gauge support"
- depends on MFD_RT5033
- help
- This adds support for battery fuel gauge in Richtek RT5033 PMIC.
- The fuelgauge calculates and determines the battery state of charge
- according to battery open circuit voltage.
-
-config CHARGER_RT9455
- tristate "Richtek RT9455 battery charger driver"
- depends on I2C
- depends on GPIOLIB || COMPILE_TEST
- select REGMAP_I2C
- help
- Say Y to enable support for Richtek RT9455 battery charger.
-
-config AXP20X_POWER
- tristate "AXP20x power supply driver"
- depends on MFD_AXP20X
- help
- This driver provides support for the power supply features of
- AXP20x PMIC.
-
-endif # POWER_SUPPLY
-
-source "drivers/power/reset/Kconfig"
source "drivers/power/avs/Kconfig"
+source "drivers/power/reset/Kconfig"
+source "drivers/power/supply/Kconfig"
diff --git a/drivers/power/Makefile b/drivers/power/Makefile
index e46b75d..ff35c71 100644
--- a/drivers/power/Makefile
+++ b/drivers/power/Makefile
@@ -1,76 +1,3 @@
-subdir-ccflags-$(CONFIG_POWER_SUPPLY_DEBUG) := -DDEBUG
-
-power_supply-y := power_supply_core.o
-power_supply-$(CONFIG_SYSFS) += power_supply_sysfs.o
-power_supply-$(CONFIG_LEDS_TRIGGERS) += power_supply_leds.o
-
-obj-$(CONFIG_POWER_SUPPLY) += power_supply.o
-obj-$(CONFIG_GENERIC_ADC_BATTERY) += generic-adc-battery.o
-
-obj-$(CONFIG_PDA_POWER) += pda_power.o
-obj-$(CONFIG_APM_POWER) += apm_power.o
-obj-$(CONFIG_AXP20X_POWER) += axp20x_usb_power.o
-obj-$(CONFIG_MAX8925_POWER) += max8925_power.o
-obj-$(CONFIG_WM831X_BACKUP) += wm831x_backup.o
-obj-$(CONFIG_WM831X_POWER) += wm831x_power.o
-obj-$(CONFIG_WM8350_POWER) += wm8350_power.o
-obj-$(CONFIG_TEST_POWER) += test_power.o
-
-obj-$(CONFIG_BATTERY_88PM860X) += 88pm860x_battery.o
-obj-$(CONFIG_BATTERY_ACT8945A) += act8945a_charger.o
-obj-$(CONFIG_BATTERY_DS2760) += ds2760_battery.o
-obj-$(CONFIG_BATTERY_DS2780) += ds2780_battery.o
-obj-$(CONFIG_BATTERY_DS2781) += ds2781_battery.o
-obj-$(CONFIG_BATTERY_DS2782) += ds2782_battery.o
-obj-$(CONFIG_BATTERY_GAUGE_LTC2941) += ltc2941-battery-gauge.o
-obj-$(CONFIG_BATTERY_GOLDFISH) += goldfish_battery.o
-obj-$(CONFIG_BATTERY_PMU) += pmu_battery.o
-obj-$(CONFIG_BATTERY_OLPC) += olpc_battery.o
-obj-$(CONFIG_BATTERY_TOSA) += tosa_battery.o
-obj-$(CONFIG_BATTERY_COLLIE) += collie_battery.o
-obj-$(CONFIG_BATTERY_IPAQ_MICRO) += ipaq_micro_battery.o
-obj-$(CONFIG_BATTERY_WM97XX) += wm97xx_battery.o
-obj-$(CONFIG_BATTERY_SBS) += sbs-battery.o
-obj-$(CONFIG_BATTERY_BQ27XXX) += bq27xxx_battery.o
-obj-$(CONFIG_BATTERY_BQ27XXX_I2C) += bq27xxx_battery_i2c.o
-obj-$(CONFIG_BATTERY_DA9030) += da9030_battery.o
-obj-$(CONFIG_BATTERY_DA9052) += da9052-battery.o
-obj-$(CONFIG_CHARGER_DA9150) += da9150-charger.o
-obj-$(CONFIG_BATTERY_DA9150) += da9150-fg.o
-obj-$(CONFIG_BATTERY_MAX17040) += max17040_battery.o
-obj-$(CONFIG_BATTERY_MAX17042) += max17042_battery.o
-obj-$(CONFIG_BATTERY_Z2) += z2_battery.o
-obj-$(CONFIG_BATTERY_RT5033) += rt5033_battery.o
-obj-$(CONFIG_CHARGER_RT9455) += rt9455_charger.o
-obj-$(CONFIG_BATTERY_S3C_ADC) += s3c_adc_battery.o
-obj-$(CONFIG_BATTERY_TWL4030_MADC) += twl4030_madc_battery.o
-obj-$(CONFIG_CHARGER_88PM860X) += 88pm860x_charger.o
-obj-$(CONFIG_CHARGER_PCF50633) += pcf50633-charger.o
-obj-$(CONFIG_BATTERY_JZ4740) += jz4740-battery.o
-obj-$(CONFIG_BATTERY_INTEL_MID) += intel_mid_battery.o
-obj-$(CONFIG_BATTERY_RX51) += rx51_battery.o
-obj-$(CONFIG_AB8500_BM) += ab8500_bmdata.o ab8500_charger.o ab8500_fg.o ab8500_btemp.o abx500_chargalg.o pm2301_charger.o
-obj-$(CONFIG_CHARGER_ISP1704) += isp1704_charger.o
-obj-$(CONFIG_CHARGER_MAX8903) += max8903_charger.o
-obj-$(CONFIG_CHARGER_TWL4030) += twl4030_charger.o
-obj-$(CONFIG_CHARGER_LP8727) += lp8727_charger.o
-obj-$(CONFIG_CHARGER_LP8788) += lp8788-charger.o
-obj-$(CONFIG_CHARGER_GPIO) += gpio-charger.o
-obj-$(CONFIG_CHARGER_MANAGER) += charger-manager.o
-obj-$(CONFIG_CHARGER_MAX14577) += max14577_charger.o
-obj-$(CONFIG_CHARGER_MAX77693) += max77693_charger.o
-obj-$(CONFIG_CHARGER_MAX8997) += max8997_charger.o
-obj-$(CONFIG_CHARGER_MAX8998) += max8998_charger.o
-obj-$(CONFIG_CHARGER_QCOM_SMBB) += qcom_smbb.o
-obj-$(CONFIG_CHARGER_BQ2415X) += bq2415x_charger.o
-obj-$(CONFIG_CHARGER_BQ24190) += bq24190_charger.o
-obj-$(CONFIG_CHARGER_BQ24257) += bq24257_charger.o
-obj-$(CONFIG_CHARGER_BQ24735) += bq24735-charger.o
-obj-$(CONFIG_CHARGER_BQ25890) += bq25890_charger.o
obj-$(CONFIG_POWER_AVS) += avs/
-obj-$(CONFIG_CHARGER_SMB347) += smb347-charger.o
-obj-$(CONFIG_CHARGER_TPS65090) += tps65090-charger.o
-obj-$(CONFIG_CHARGER_TPS65217) += tps65217_charger.o
obj-$(CONFIG_POWER_RESET) += reset/
-obj-$(CONFIG_AXP288_FUEL_GAUGE) += axp288_fuel_gauge.o
-obj-$(CONFIG_AXP288_CHARGER) += axp288_charger.o
+obj-$(CONFIG_POWER_SUPPLY) += supply/
diff --git a/drivers/power/act8945a_charger.c b/drivers/power/act8945a_charger.c
deleted file mode 100644
index b5c00e4..0000000
--- a/drivers/power/act8945a_charger.c
+++ /dev/null
@@ -1,359 +0,0 @@
-/*
- * Power supply driver for the Active-semi ACT8945A PMIC
- *
- * Copyright (C) 2015 Atmel Corporation
- *
- * Author: Wenyou Yang <wenyou.yang@atmel.com>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- *
- */
-#include <linux/module.h>
-#include <linux/of.h>
-#include <linux/of_gpio.h>
-#include <linux/platform_device.h>
-#include <linux/power_supply.h>
-#include <linux/regmap.h>
-
-static const char *act8945a_charger_model = "ACT8945A";
-static const char *act8945a_charger_manufacturer = "Active-semi";
-
-/**
- * ACT8945A Charger Register Map
- */
-
-/* 0x70: Reserved */
-#define ACT8945A_APCH_CFG 0x71
-#define ACT8945A_APCH_STATUS 0x78
-#define ACT8945A_APCH_CTRL 0x79
-#define ACT8945A_APCH_STATE 0x7A
-
-/* ACT8945A_APCH_CFG */
-#define APCH_CFG_OVPSET (0x3 << 0)
-#define APCH_CFG_OVPSET_6V6 (0x0 << 0)
-#define APCH_CFG_OVPSET_7V (0x1 << 0)
-#define APCH_CFG_OVPSET_7V5 (0x2 << 0)
-#define APCH_CFG_OVPSET_8V (0x3 << 0)
-#define APCH_CFG_PRETIMO (0x3 << 2)
-#define APCH_CFG_PRETIMO_40_MIN (0x0 << 2)
-#define APCH_CFG_PRETIMO_60_MIN (0x1 << 2)
-#define APCH_CFG_PRETIMO_80_MIN (0x2 << 2)
-#define APCH_CFG_PRETIMO_DISABLED (0x3 << 2)
-#define APCH_CFG_TOTTIMO (0x3 << 4)
-#define APCH_CFG_TOTTIMO_3_HOUR (0x0 << 4)
-#define APCH_CFG_TOTTIMO_4_HOUR (0x1 << 4)
-#define APCH_CFG_TOTTIMO_5_HOUR (0x2 << 4)
-#define APCH_CFG_TOTTIMO_DISABLED (0x3 << 4)
-#define APCH_CFG_SUSCHG (0x1 << 7)
-
-#define APCH_STATUS_CHGDAT BIT(0)
-#define APCH_STATUS_INDAT BIT(1)
-#define APCH_STATUS_TEMPDAT BIT(2)
-#define APCH_STATUS_TIMRDAT BIT(3)
-#define APCH_STATUS_CHGSTAT BIT(4)
-#define APCH_STATUS_INSTAT BIT(5)
-#define APCH_STATUS_TEMPSTAT BIT(6)
-#define APCH_STATUS_TIMRSTAT BIT(7)
-
-#define APCH_CTRL_CHGEOCOUT BIT(0)
-#define APCH_CTRL_INDIS BIT(1)
-#define APCH_CTRL_TEMPOUT BIT(2)
-#define APCH_CTRL_TIMRPRE BIT(3)
-#define APCH_CTRL_CHGEOCIN BIT(4)
-#define APCH_CTRL_INCON BIT(5)
-#define APCH_CTRL_TEMPIN BIT(6)
-#define APCH_CTRL_TIMRTOT BIT(7)
-
-#define APCH_STATE_ACINSTAT (0x1 << 1)
-#define APCH_STATE_CSTATE (0x3 << 4)
-#define APCH_STATE_CSTATE_SHIFT 4
-#define APCH_STATE_CSTATE_DISABLED 0x00
-#define APCH_STATE_CSTATE_EOC 0x01
-#define APCH_STATE_CSTATE_FAST 0x02
-#define APCH_STATE_CSTATE_PRE 0x03
-
-struct act8945a_charger {
- struct regmap *regmap;
- bool battery_temperature;
-};
-
-static int act8945a_get_charger_state(struct regmap *regmap, int *val)
-{
- int ret;
- unsigned int status, state;
-
- ret = regmap_read(regmap, ACT8945A_APCH_STATUS, &status);
- if (ret < 0)
- return ret;
-
- ret = regmap_read(regmap, ACT8945A_APCH_STATE, &state);
- if (ret < 0)
- return ret;
-
- state &= APCH_STATE_CSTATE;
- state >>= APCH_STATE_CSTATE_SHIFT;
-
- if (state == APCH_STATE_CSTATE_EOC) {
- if (status & APCH_STATUS_CHGDAT)
- *val = POWER_SUPPLY_STATUS_FULL;
- else
- *val = POWER_SUPPLY_STATUS_NOT_CHARGING;
- } else if ((state == APCH_STATE_CSTATE_FAST) ||
- (state == APCH_STATE_CSTATE_PRE)) {
- *val = POWER_SUPPLY_STATUS_CHARGING;
- } else {
- *val = POWER_SUPPLY_STATUS_NOT_CHARGING;
- }
-
- return 0;
-}
-
-static int act8945a_get_charge_type(struct regmap *regmap, int *val)
-{
- int ret;
- unsigned int state;
-
- ret = regmap_read(regmap, ACT8945A_APCH_STATE, &state);
- if (ret < 0)
- return ret;
-
- state &= APCH_STATE_CSTATE;
- state >>= APCH_STATE_CSTATE_SHIFT;
-
- switch (state) {
- case APCH_STATE_CSTATE_PRE:
- *val = POWER_SUPPLY_CHARGE_TYPE_TRICKLE;
- break;
- case APCH_STATE_CSTATE_FAST:
- *val = POWER_SUPPLY_CHARGE_TYPE_FAST;
- break;
- case APCH_STATE_CSTATE_EOC:
- case APCH_STATE_CSTATE_DISABLED:
- default:
- *val = POWER_SUPPLY_CHARGE_TYPE_NONE;
- }
-
- return 0;
-}
-
-static int act8945a_get_battery_health(struct act8945a_charger *charger,
- struct regmap *regmap, int *val)
-{
- int ret;
- unsigned int status;
-
- ret = regmap_read(regmap, ACT8945A_APCH_STATUS, &status);
- if (ret < 0)
- return ret;
-
- if (charger->battery_temperature && !(status & APCH_STATUS_TEMPDAT))
- *val = POWER_SUPPLY_HEALTH_OVERHEAT;
- else if (!(status & APCH_STATUS_INDAT))
- *val = POWER_SUPPLY_HEALTH_OVERVOLTAGE;
- else if (status & APCH_STATUS_TIMRDAT)
- *val = POWER_SUPPLY_HEALTH_SAFETY_TIMER_EXPIRE;
- else
- *val = POWER_SUPPLY_HEALTH_GOOD;
-
- return 0;
-}
-
-static enum power_supply_property act8945a_charger_props[] = {
- POWER_SUPPLY_PROP_STATUS,
- POWER_SUPPLY_PROP_CHARGE_TYPE,
- POWER_SUPPLY_PROP_TECHNOLOGY,
- POWER_SUPPLY_PROP_HEALTH,
- POWER_SUPPLY_PROP_MODEL_NAME,
- POWER_SUPPLY_PROP_MANUFACTURER
-};
-
-static int act8945a_charger_get_property(struct power_supply *psy,
- enum power_supply_property prop,
- union power_supply_propval *val)
-{
- struct act8945a_charger *charger = power_supply_get_drvdata(psy);
- struct regmap *regmap = charger->regmap;
- int ret = 0;
-
- switch (prop) {
- case POWER_SUPPLY_PROP_STATUS:
- ret = act8945a_get_charger_state(regmap, &val->intval);
- break;
- case POWER_SUPPLY_PROP_CHARGE_TYPE:
- ret = act8945a_get_charge_type(regmap, &val->intval);
- break;
- case POWER_SUPPLY_PROP_TECHNOLOGY:
- val->intval = POWER_SUPPLY_TECHNOLOGY_LION;
- break;
- case POWER_SUPPLY_PROP_HEALTH:
- ret = act8945a_get_battery_health(charger,
- regmap, &val->intval);
- break;
- case POWER_SUPPLY_PROP_MODEL_NAME:
- val->strval = act8945a_charger_model;
- break;
- case POWER_SUPPLY_PROP_MANUFACTURER:
- val->strval = act8945a_charger_manufacturer;
- break;
- default:
- return -EINVAL;
- }
-
- return ret;
-}
-
-static const struct power_supply_desc act8945a_charger_desc = {
- .name = "act8945a-charger",
- .type = POWER_SUPPLY_TYPE_BATTERY,
- .get_property = act8945a_charger_get_property,
- .properties = act8945a_charger_props,
- .num_properties = ARRAY_SIZE(act8945a_charger_props),
-};
-
-#define DEFAULT_TOTAL_TIME_OUT 3
-#define DEFAULT_PRE_TIME_OUT 40
-#define DEFAULT_INPUT_OVP_THRESHOLD 6600
-
-static int act8945a_charger_config(struct device *dev,
- struct act8945a_charger *charger)
-{
- struct device_node *np = dev->of_node;
- enum of_gpio_flags flags;
- struct regmap *regmap = charger->regmap;
-
- u32 total_time_out;
- u32 pre_time_out;
- u32 input_voltage_threshold;
- int chglev_pin;
-
- unsigned int value = 0;
-
- if (!np) {
- dev_err(dev, "no charger of node\n");
- return -EINVAL;
- }
-
- charger->battery_temperature = of_property_read_bool(np,
- "active-semi,check-battery-temperature");
-
- chglev_pin = of_get_named_gpio_flags(np,
- "active-semi,chglev-gpios", 0, &flags);
-
- if (gpio_is_valid(chglev_pin)) {
- gpio_set_value(chglev_pin,
- ((flags == OF_GPIO_ACTIVE_LOW) ? 0 : 1));
- }
-
- if (of_property_read_u32(np,
- "active-semi,input-voltage-threshold-microvolt",
- &input_voltage_threshold))
- input_voltage_threshold = DEFAULT_INPUT_OVP_THRESHOLD;
-
- if (of_property_read_u32(np,
- "active-semi,precondition-timeout",
- &pre_time_out))
- pre_time_out = DEFAULT_PRE_TIME_OUT;
-
- if (of_property_read_u32(np, "active-semi,total-timeout",
- &total_time_out))
- total_time_out = DEFAULT_TOTAL_TIME_OUT;
-
- switch (input_voltage_threshold) {
- case 8000:
- value |= APCH_CFG_OVPSET_8V;
- break;
- case 7500:
- value |= APCH_CFG_OVPSET_7V5;
- break;
- case 7000:
- value |= APCH_CFG_OVPSET_7V;
- break;
- case 6600:
- default:
- value |= APCH_CFG_OVPSET_6V6;
- break;
- }
-
- switch (pre_time_out) {
- case 60:
- value |= APCH_CFG_PRETIMO_60_MIN;
- break;
- case 80:
- value |= APCH_CFG_PRETIMO_80_MIN;
- break;
- case 0:
- value |= APCH_CFG_PRETIMO_DISABLED;
- break;
- case 40:
- default:
- value |= APCH_CFG_PRETIMO_40_MIN;
- break;
- }
-
- switch (total_time_out) {
- case 4:
- value |= APCH_CFG_TOTTIMO_4_HOUR;
- break;
- case 5:
- value |= APCH_CFG_TOTTIMO_5_HOUR;
- break;
- case 0:
- value |= APCH_CFG_TOTTIMO_DISABLED;
- break;
- case 3:
- default:
- value |= APCH_CFG_TOTTIMO_3_HOUR;
- break;
- }
-
- return regmap_write(regmap, ACT8945A_APCH_CFG, value);
-}
-
-static int act8945a_charger_probe(struct platform_device *pdev)
-{
- struct act8945a_charger *charger;
- struct power_supply *psy;
- struct power_supply_config psy_cfg = {};
- int ret;
-
- charger = devm_kzalloc(&pdev->dev, sizeof(*charger), GFP_KERNEL);
- if (!charger)
- return -ENOMEM;
-
- charger->regmap = dev_get_regmap(pdev->dev.parent, NULL);
- if (!charger->regmap) {
- dev_err(&pdev->dev, "Parent did not provide regmap\n");
- return -EINVAL;
- }
-
- ret = act8945a_charger_config(pdev->dev.parent, charger);
- if (ret)
- return ret;
-
- psy_cfg.of_node = pdev->dev.parent->of_node;
- psy_cfg.drv_data = charger;
-
- psy = devm_power_supply_register(&pdev->dev,
- &act8945a_charger_desc,
- &psy_cfg);
- if (IS_ERR(psy)) {
- dev_err(&pdev->dev, "failed to register power supply\n");
- return PTR_ERR(psy);
- }
-
- return 0;
-}
-
-static struct platform_driver act8945a_charger_driver = {
- .driver = {
- .name = "act8945a-charger",
- },
- .probe = act8945a_charger_probe,
-};
-module_platform_driver(act8945a_charger_driver);
-
-MODULE_DESCRIPTION("Active-semi ACT8945A ActivePath charger driver");
-MODULE_AUTHOR("Wenyou Yang <wenyou.yang@atmel.com>");
-MODULE_LICENSE("GPL");
diff --git a/drivers/power/reset/keystone-reset.c b/drivers/power/reset/keystone-reset.c
index c70f1bf..0938085 100644
--- a/drivers/power/reset/keystone-reset.c
+++ b/drivers/power/reset/keystone-reset.c
@@ -139,7 +139,7 @@
}
if (val >= WDT_MUX_NUMBER) {
- dev_err(dev, "ti,wdt-list property can contain"
+ dev_err(dev, "ti,wdt-list property can contain "
"only numbers < 4\n");
return -EINVAL;
}
diff --git a/drivers/power/reset/reboot-mode.c b/drivers/power/reset/reboot-mode.c
index 2dfbbce..fb51218 100644
--- a/drivers/power/reset/reboot-mode.c
+++ b/drivers/power/reset/reboot-mode.c
@@ -135,6 +135,65 @@
}
EXPORT_SYMBOL_GPL(reboot_mode_unregister);
+static void devm_reboot_mode_release(struct device *dev, void *res)
+{
+ reboot_mode_unregister(*(struct reboot_mode_driver **)res);
+}
+
+/**
+ * devm_reboot_mode_register() - resource managed reboot_mode_register()
+ * @dev: device to associate this resource with
+ * @reboot: reboot mode driver
+ *
+ * Returns: 0 on success or a negative error code on failure.
+ */
+int devm_reboot_mode_register(struct device *dev,
+ struct reboot_mode_driver *reboot)
+{
+ struct reboot_mode_driver **dr;
+ int rc;
+
+ dr = devres_alloc(devm_reboot_mode_release, sizeof(*dr), GFP_KERNEL);
+ if (!dr)
+ return -ENOMEM;
+
+ rc = reboot_mode_register(reboot);
+ if (rc) {
+ devres_free(dr);
+ return rc;
+ }
+
+ *dr = reboot;
+ devres_add(dev, dr);
+
+ return 0;
+}
+EXPORT_SYMBOL_GPL(devm_reboot_mode_register);
+
+static int devm_reboot_mode_match(struct device *dev, void *res, void *data)
+{
+ struct reboot_mode_driver **p = res;
+
+ if (WARN_ON(!p || !*p))
+ return 0;
+
+ return *p == data;
+}
+
+/**
+ * devm_reboot_mode_unregister() - resource managed reboot_mode_unregister()
+ * @dev: device to associate this resource with
+ * @reboot: reboot mode driver
+ */
+void devm_reboot_mode_unregister(struct device *dev,
+ struct reboot_mode_driver *reboot)
+{
+ WARN_ON(devres_release(dev,
+ devm_reboot_mode_release,
+ devm_reboot_mode_match, reboot));
+}
+EXPORT_SYMBOL_GPL(devm_reboot_mode_unregister);
+
MODULE_AUTHOR("Andy Yan <andy.yan@rock-chips.com");
MODULE_DESCRIPTION("System reboot mode core library");
MODULE_LICENSE("GPL v2");
diff --git a/drivers/power/reset/reboot-mode.h b/drivers/power/reset/reboot-mode.h
index 2491bb7..75f7fe5 100644
--- a/drivers/power/reset/reboot-mode.h
+++ b/drivers/power/reset/reboot-mode.h
@@ -10,5 +10,9 @@
int reboot_mode_register(struct reboot_mode_driver *reboot);
int reboot_mode_unregister(struct reboot_mode_driver *reboot);
+int devm_reboot_mode_register(struct device *dev,
+ struct reboot_mode_driver *reboot);
+void devm_reboot_mode_unregister(struct device *dev,
+ struct reboot_mode_driver *reboot);
#endif
diff --git a/drivers/power/reset/st-poweroff.c b/drivers/power/reset/st-poweroff.c
index a488877..2046b31 100644
--- a/drivers/power/reset/st-poweroff.c
+++ b/drivers/power/reset/st-poweroff.c
@@ -28,28 +28,6 @@
unsigned int mask_rst_msk;
};
-/* STiH415 */
-#define STIH415_SYSCFG_11 0x2c
-#define STIH415_SYSCFG_15 0x3c
-
-static struct reset_syscfg stih415_reset = {
- .offset_rst = STIH415_SYSCFG_11,
- .mask_rst = BIT(0),
- .offset_rst_msk = STIH415_SYSCFG_15,
- .mask_rst_msk = BIT(0)
-};
-
-/* STiH416 */
-#define STIH416_SYSCFG_500 0x7d0
-#define STIH416_SYSCFG_504 0x7e0
-
-static struct reset_syscfg stih416_reset = {
- .offset_rst = STIH416_SYSCFG_500,
- .mask_rst = BIT(0),
- .offset_rst_msk = STIH416_SYSCFG_504,
- .mask_rst_msk = BIT(0)
-};
-
/* STiH407 */
#define STIH407_SYSCFG_4000 0x0
#define STIH407_SYSCFG_4008 0x20
@@ -61,16 +39,6 @@
.mask_rst_msk = BIT(0)
};
-/* STiD127 */
-#define STID127_SYSCFG_700 0x0
-#define STID127_SYSCFG_773 0x124
-
-static struct reset_syscfg stid127_reset = {
- .offset_rst = STID127_SYSCFG_773,
- .mask_rst = BIT(0),
- .offset_rst_msk = STID127_SYSCFG_700,
- .mask_rst_msk = BIT(8)
-};
static struct reset_syscfg *st_restart_syscfg;
@@ -99,17 +67,8 @@
static const struct of_device_id st_reset_of_match[] = {
{
- .compatible = "st,stih415-restart",
- .data = (void *)&stih415_reset,
- }, {
- .compatible = "st,stih416-restart",
- .data = (void *)&stih416_reset,
- }, {
.compatible = "st,stih407-restart",
.data = (void *)&stih407_reset,
- }, {
- .compatible = "st,stid127-restart",
- .data = (void *)&stid127_reset,
},
{}
};
diff --git a/drivers/power/reset/syscon-reboot-mode.c b/drivers/power/reset/syscon-reboot-mode.c
index 9e1cba5..1ecb51d 100644
--- a/drivers/power/reset/syscon-reboot-mode.c
+++ b/drivers/power/reset/syscon-reboot-mode.c
@@ -53,8 +53,6 @@
syscon_rbm->reboot.write = syscon_reboot_mode_write;
syscon_rbm->mask = 0xffffffff;
- dev_set_drvdata(&pdev->dev, syscon_rbm);
-
syscon_rbm->map = syscon_node_to_regmap(pdev->dev.parent->of_node);
if (IS_ERR(syscon_rbm->map))
return PTR_ERR(syscon_rbm->map);
@@ -65,20 +63,13 @@
of_property_read_u32(pdev->dev.of_node, "mask", &syscon_rbm->mask);
- ret = reboot_mode_register(&syscon_rbm->reboot);
+ ret = devm_reboot_mode_register(&pdev->dev, &syscon_rbm->reboot);
if (ret)
dev_err(&pdev->dev, "can't register reboot mode\n");
return ret;
}
-static int syscon_reboot_mode_remove(struct platform_device *pdev)
-{
- struct syscon_reboot_mode *syscon_rbm = dev_get_drvdata(&pdev->dev);
-
- return reboot_mode_unregister(&syscon_rbm->reboot);
-}
-
static const struct of_device_id syscon_reboot_mode_of_match[] = {
{ .compatible = "syscon-reboot-mode" },
{}
@@ -86,7 +77,6 @@
static struct platform_driver syscon_reboot_mode_driver = {
.probe = syscon_reboot_mode_probe,
- .remove = syscon_reboot_mode_remove,
.driver = {
.name = "syscon-reboot-mode",
.of_match_table = syscon_reboot_mode_of_match,
diff --git a/drivers/power/reset/xgene-reboot.c b/drivers/power/reset/xgene-reboot.c
index f07e93c..73c3d93 100644
--- a/drivers/power/reset/xgene-reboot.c
+++ b/drivers/power/reset/xgene-reboot.c
@@ -81,8 +81,10 @@
ctx->restart_handler.notifier_call = xgene_restart_handler;
ctx->restart_handler.priority = 128;
err = register_restart_handler(&ctx->restart_handler);
- if (err)
+ if (err) {
+ iounmap(ctx->csr);
dev_err(dev, "cannot register restart handler (err=%d)\n", err);
+ }
return err;
}
diff --git a/drivers/power/reset/zx-reboot.c b/drivers/power/reset/zx-reboot.c
index a5b0096..b0b1eb3 100644
--- a/drivers/power/reset/zx-reboot.c
+++ b/drivers/power/reset/zx-reboot.c
@@ -58,9 +58,12 @@
}
err = register_restart_handler(&zx_restart_nb);
- if (err)
+ if (err) {
+ iounmap(base);
+ iounmap(pcu_base);
dev_err(&pdev->dev, "Register restart handler failed(err=%d)\n",
err);
+ }
return err;
}
diff --git a/drivers/power/88pm860x_battery.c b/drivers/power/supply/88pm860x_battery.c
similarity index 100%
rename from drivers/power/88pm860x_battery.c
rename to drivers/power/supply/88pm860x_battery.c
diff --git a/drivers/power/88pm860x_charger.c b/drivers/power/supply/88pm860x_charger.c
similarity index 100%
rename from drivers/power/88pm860x_charger.c
rename to drivers/power/supply/88pm860x_charger.c
diff --git a/drivers/power/supply/Kconfig b/drivers/power/supply/Kconfig
new file mode 100644
index 0000000..76806a0
--- /dev/null
+++ b/drivers/power/supply/Kconfig
@@ -0,0 +1,514 @@
+menuconfig POWER_SUPPLY
+ bool "Power supply class support"
+ help
+ Say Y here to enable power supply class support. This allows
+ power supply (batteries, AC, USB) monitoring by userspace
+ via sysfs and uevent (if available) and/or APM kernel interface
+ (if selected below).
+
+if POWER_SUPPLY
+
+config POWER_SUPPLY_DEBUG
+ bool "Power supply debug"
+ help
+ Say Y here to enable debugging messages for power supply class
+ and drivers.
+
+config PDA_POWER
+ tristate "Generic PDA/phone power driver"
+ depends on !S390
+ help
+ Say Y here to enable generic power driver for PDAs and phones with
+ one or two external power supplies (AC/USB) connected to main and
+ backup batteries, and optional builtin charger.
+
+config APM_POWER
+ tristate "APM emulation for class batteries"
+ depends on APM_EMULATION
+ help
+ Say Y here to enable support APM status emulation using
+ battery class devices.
+
+config GENERIC_ADC_BATTERY
+ tristate "Generic battery support using IIO"
+ depends on IIO
+ help
+ Say Y here to enable support for the generic battery driver
+ which uses IIO framework to read adc.
+
+config MAX8925_POWER
+ tristate "MAX8925 battery charger support"
+ depends on MFD_MAX8925
+ help
+ Say Y here to enable support for the battery charger in the Maxim
+ MAX8925 PMIC.
+
+config WM831X_BACKUP
+ tristate "WM831X backup battery charger support"
+ depends on MFD_WM831X
+ help
+ Say Y here to enable support for the backup battery charger
+ in the Wolfson Microelectronics WM831x PMICs.
+
+config WM831X_POWER
+ tristate "WM831X PMU support"
+ depends on MFD_WM831X
+ help
+ Say Y here to enable support for the power management unit
+ provided by Wolfson Microelectronics WM831x PMICs.
+
+config WM8350_POWER
+ tristate "WM8350 PMU support"
+ depends on MFD_WM8350
+ help
+ Say Y here to enable support for the power management unit
+ provided by the Wolfson Microelectronics WM8350 PMIC.
+
+config TEST_POWER
+ tristate "Test power driver"
+ help
+ This driver is used for testing. It's safe to say M here.
+
+config BATTERY_88PM860X
+ tristate "Marvell 88PM860x battery driver"
+ depends on MFD_88PM860X
+ help
+ Say Y here to enable battery monitor for Marvell 88PM860x chip.
+
+config BATTERY_ACT8945A
+ tristate "Active-semi ACT8945A charger driver"
+ depends on MFD_ACT8945A || COMPILE_TEST
+ help
+ Say Y here to enable support for power supply provided by
+ Active-semi ActivePath ACT8945A charger.
+
+config BATTERY_DS2760
+ tristate "DS2760 battery driver (HP iPAQ & others)"
+ depends on W1 && W1_SLAVE_DS2760
+ help
+ Say Y here to enable support for batteries with ds2760 chip.
+
+config BATTERY_DS2780
+ tristate "DS2780 battery driver"
+ depends on HAS_IOMEM
+ select W1
+ select W1_SLAVE_DS2780
+ help
+ Say Y here to enable support for batteries with ds2780 chip.
+
+config BATTERY_DS2781
+ tristate "DS2781 battery driver"
+ depends on HAS_IOMEM
+ select W1
+ select W1_SLAVE_DS2781
+ help
+ If you enable this you will have the DS2781 battery driver support.
+
+ The battery monitor chip is used in many batteries/devices
+ as the one who is responsible for charging/discharging/monitoring
+ Li+ batteries.
+
+ If you are unsure, say N.
+
+config BATTERY_DS2782
+ tristate "DS2782/DS2786 standalone gas-gauge"
+ depends on I2C
+ help
+ Say Y here to enable support for the DS2782/DS2786 standalone battery
+ gas-gauge.
+
+config BATTERY_PMU
+ tristate "Apple PMU battery"
+ depends on PPC32 && ADB_PMU
+ help
+ Say Y here to expose battery information on Apple machines
+ through the generic battery class.
+
+config BATTERY_OLPC
+ tristate "One Laptop Per Child battery"
+ depends on X86_32 && OLPC
+ help
+ Say Y to enable support for the battery on the OLPC laptop.
+
+config BATTERY_TOSA
+ tristate "Sharp SL-6000 (tosa) battery"
+ depends on MACH_TOSA && MFD_TC6393XB && TOUCHSCREEN_WM97XX
+ help
+ Say Y to enable support for the battery on the Sharp Zaurus
+ SL-6000 (tosa) models.
+
+config BATTERY_COLLIE
+ tristate "Sharp SL-5500 (collie) battery"
+ depends on SA1100_COLLIE && MCP_UCB1200
+ help
+ Say Y to enable support for the battery on the Sharp Zaurus
+ SL-5500 (collie) models.
+
+config BATTERY_IPAQ_MICRO
+ tristate "iPAQ Atmel Micro ASIC battery driver"
+ depends on MFD_IPAQ_MICRO
+ help
+ Choose this option if you want to monitor battery status on
+ Compaq/HP iPAQ h3100 and h3600.
+
+config BATTERY_WM97XX
+ bool "WM97xx generic battery driver"
+ depends on TOUCHSCREEN_WM97XX=y
+ help
+ Say Y to enable support for battery measured by WM97xx aux port.
+
+config BATTERY_SBS
+ tristate "SBS Compliant gas gauge"
+ depends on I2C
+ help
+ Say Y to include support for SBS battery driver for SBS-compliant
+ gas gauges.
+
+config BATTERY_BQ27XXX
+ tristate "BQ27xxx battery driver"
+ help
+ Say Y here to enable support for batteries with BQ27xxx chips.
+
+config BATTERY_BQ27XXX_I2C
+ tristate "BQ27xxx I2C support"
+ depends on BATTERY_BQ27XXX
+ depends on I2C
+ default y
+ help
+ Say Y here to enable support for batteries with BQ27xxx chips
+ connected over an I2C bus.
+
+config BATTERY_DA9030
+ tristate "DA9030 battery driver"
+ depends on PMIC_DA903X
+ help
+ Say Y here to enable support for batteries charger integrated into
+ DA9030 PMIC.
+
+config BATTERY_DA9052
+ tristate "Dialog DA9052 Battery"
+ depends on PMIC_DA9052
+ help
+ Say Y here to enable support for batteries charger integrated into
+ DA9052 PMIC.
+
+config CHARGER_DA9150
+ tristate "Dialog Semiconductor DA9150 Charger support"
+ depends on MFD_DA9150
+ depends on DA9150_GPADC
+ depends on IIO
+ help
+ Say Y here to enable support for charger unit of the DA9150
+ Integrated Charger & Fuel-Gauge IC.
+
+ This driver can also be built as a module. If so, the module will be
+ called da9150-charger.
+
+config BATTERY_DA9150
+ tristate "Dialog Semiconductor DA9150 Fuel Gauge support"
+ depends on MFD_DA9150
+ help
+ Say Y here to enable support for the Fuel-Gauge unit of the DA9150
+ Integrated Charger & Fuel-Gauge IC
+
+ This driver can also be built as a module. If so, the module will be
+ called da9150-fg.
+
+config AXP288_CHARGER
+ tristate "X-Powers AXP288 Charger"
+ depends on MFD_AXP20X && EXTCON_AXP288
+ help
+ Say yes here to have support X-Power AXP288 power management IC (PMIC)
+ integrated charger.
+
+config AXP288_FUEL_GAUGE
+ tristate "X-Powers AXP288 Fuel Gauge"
+ depends on MFD_AXP20X && IIO
+ help
+ Say yes here to have support for X-Power power management IC (PMIC)
+ Fuel Gauge. The device provides battery statistics and status
+ monitoring as well as alerts for battery over/under voltage and
+ over/under temperature.
+
+config BATTERY_MAX17040
+ tristate "Maxim MAX17040 Fuel Gauge"
+ depends on I2C
+ help
+ MAX17040 is fuel-gauge systems for lithium-ion (Li+) batteries
+ in handheld and portable equipment. The MAX17040 is configured
+ to operate with a single lithium cell
+
+config BATTERY_MAX17042
+ tristate "Maxim MAX17042/17047/17050/8997/8966 Fuel Gauge"
+ depends on I2C
+ select REGMAP_I2C
+ help
+ MAX17042 is fuel-gauge systems for lithium-ion (Li+) batteries
+ in handheld and portable equipment. The MAX17042 is configured
+ to operate with a single lithium cell. MAX8997 and MAX8966 are
+ multi-function devices that include fuel gauages that are compatible
+ with MAX17042. This driver also supports max17047/50 chips which are
+ improved version of max17042.
+
+config BATTERY_Z2
+ tristate "Z2 battery driver"
+ depends on I2C && MACH_ZIPIT2
+ help
+ Say Y to include support for the battery on the Zipit Z2.
+
+config BATTERY_S3C_ADC
+ tristate "Battery driver for Samsung ADC based monitoring"
+ depends on S3C_ADC
+ help
+ Say Y here to enable support for iPAQ h1930/h1940/rx1950 battery
+
+config BATTERY_TWL4030_MADC
+ tristate "TWL4030 MADC battery driver"
+ depends on TWL4030_MADC
+ help
+ Say Y here to enable this dumb driver for batteries managed
+ through the TWL4030 MADC.
+
+config CHARGER_88PM860X
+ tristate "Marvell 88PM860x Charger driver"
+ depends on MFD_88PM860X && BATTERY_88PM860X
+ help
+ Say Y here to enable charger for Marvell 88PM860x chip.
+
+config CHARGER_PCF50633
+ tristate "NXP PCF50633 MBC"
+ depends on MFD_PCF50633
+ help
+ Say Y to include support for NXP PCF50633 Main Battery Charger.
+
+config BATTERY_JZ4740
+ tristate "Ingenic JZ4740 battery"
+ depends on MACH_JZ4740
+ depends on MFD_JZ4740_ADC
+ help
+ Say Y to enable support for the battery on Ingenic JZ4740 based
+ boards.
+
+ This driver can be build as a module. If so, the module will be
+ called jz4740-battery.
+
+config BATTERY_INTEL_MID
+ tristate "Battery driver for Intel MID platforms"
+ depends on INTEL_SCU_IPC && SPI
+ help
+ Say Y here to enable the battery driver on Intel MID
+ platforms.
+
+config BATTERY_RX51
+ tristate "Nokia RX-51 (N900) battery driver"
+ depends on TWL4030_MADC
+ help
+ Say Y here to enable support for battery information on Nokia
+ RX-51, also known as N900 tablet.
+
+config CHARGER_ISP1704
+ tristate "ISP1704 USB Charger Detection"
+ depends on USB_PHY
+ depends on USB_GADGET || !USB_GADGET # if USB_GADGET=m, this can't be 'y'
+ help
+ Say Y to enable support for USB Charger Detection with
+ ISP1707/ISP1704 USB transceivers.
+
+config CHARGER_MAX8903
+ tristate "MAX8903 Battery DC-DC Charger for USB and Adapter Power"
+ help
+ Say Y to enable support for the MAX8903 DC-DC charger and sysfs.
+ The driver supports controlling charger-enable and current-limit
+ pins based on the status of charger connections with interrupt
+ handlers.
+
+config CHARGER_TWL4030
+ tristate "OMAP TWL4030 BCI charger driver"
+ depends on IIO && TWL4030_CORE
+ help
+ Say Y here to enable support for TWL4030 Battery Charge Interface.
+
+config CHARGER_LP8727
+ tristate "TI/National Semiconductor LP8727 charger driver"
+ depends on I2C
+ help
+ Say Y here to enable support for LP8727 Charger Driver.
+
+config CHARGER_LP8788
+ tristate "TI LP8788 charger driver"
+ depends on MFD_LP8788
+ depends on LP8788_ADC
+ depends on IIO
+ help
+ Say Y to enable support for the LP8788 linear charger.
+
+config CHARGER_GPIO
+ tristate "GPIO charger"
+ depends on GPIOLIB || COMPILE_TEST
+ help
+ Say Y to include support for chargers which report their online status
+ through a GPIO pin.
+
+ This driver can be build as a module. If so, the module will be
+ called gpio-charger.
+
+config CHARGER_MANAGER
+ bool "Battery charger manager for multiple chargers"
+ depends on REGULATOR
+ select EXTCON
+ help
+ Say Y to enable charger-manager support, which allows multiple
+ chargers attached to a battery and multiple batteries attached to a
+ system. The charger-manager also can monitor charging status in
+ runtime and in suspend-to-RAM by waking up the system periodically
+ with help of suspend_again support.
+
+config CHARGER_MAX14577
+ tristate "Maxim MAX14577/77836 battery charger driver"
+ depends on MFD_MAX14577
+ help
+ Say Y to enable support for the battery charger control sysfs and
+ platform data of MAX14577/77836 MUICs.
+
+config CHARGER_MAX77693
+ tristate "Maxim MAX77693 battery charger driver"
+ depends on MFD_MAX77693
+ help
+ Say Y to enable support for the Maxim MAX77693 battery charger.
+
+config CHARGER_MAX8997
+ tristate "Maxim MAX8997/MAX8966 PMIC battery charger driver"
+ depends on MFD_MAX8997 && REGULATOR_MAX8997
+ help
+ Say Y to enable support for the battery charger control sysfs and
+ platform data of MAX8997/LP3974 PMICs.
+
+config CHARGER_MAX8998
+ tristate "Maxim MAX8998/LP3974 PMIC battery charger driver"
+ depends on MFD_MAX8998 && REGULATOR_MAX8998
+ help
+ Say Y to enable support for the battery charger control sysfs and
+ platform data of MAX8998/LP3974 PMICs.
+
+config CHARGER_QCOM_SMBB
+ tristate "Qualcomm Switch-Mode Battery Charger and Boost"
+ depends on MFD_SPMI_PMIC || COMPILE_TEST
+ depends on OF
+ depends on EXTCON
+ help
+ Say Y to include support for the Switch-Mode Battery Charger and
+ Boost (SMBB) hardware found in Qualcomm PM8941 PMICs. The charger
+ is an integrated, single-cell lithium-ion battery charger. DT
+ configuration is required for loading, see the devicetree
+ documentation for more detail. The base name for this driver is
+ 'pm8941_charger'.
+
+config CHARGER_BQ2415X
+ tristate "TI BQ2415x battery charger driver"
+ depends on I2C
+ help
+ Say Y to enable support for the TI BQ2415x battery charger
+ PMICs.
+
+ You'll need this driver to charge batteries on e.g. Nokia
+ RX-51/N900.
+
+config CHARGER_BQ24190
+ tristate "TI BQ24190 battery charger driver"
+ depends on I2C
+ depends on GPIOLIB || COMPILE_TEST
+ help
+ Say Y to enable support for the TI BQ24190 battery charger.
+
+config CHARGER_BQ24257
+ tristate "TI BQ24250/24251/24257 battery charger driver"
+ depends on I2C
+ depends on GPIOLIB || COMPILE_TEST
+ depends on REGMAP_I2C
+ help
+ Say Y to enable support for the TI BQ24250, BQ24251, and BQ24257 battery
+ chargers.
+
+config CHARGER_BQ24735
+ tristate "TI BQ24735 battery charger support"
+ depends on I2C
+ depends on GPIOLIB || COMPILE_TEST
+ help
+ Say Y to enable support for the TI BQ24735 battery charger.
+
+config CHARGER_BQ25890
+ tristate "TI BQ25890 battery charger driver"
+ depends on I2C
+ depends on GPIOLIB || COMPILE_TEST
+ select REGMAP_I2C
+ help
+ Say Y to enable support for the TI BQ25890 battery charger.
+
+config CHARGER_SMB347
+ tristate "Summit Microelectronics SMB347 Battery Charger"
+ depends on I2C
+ select REGMAP_I2C
+ help
+ Say Y to include support for Summit Microelectronics SMB347
+ Battery Charger.
+
+config CHARGER_TPS65090
+ tristate "TPS65090 battery charger driver"
+ depends on MFD_TPS65090
+ help
+ Say Y here to enable support for battery charging with TPS65090
+ PMIC chips.
+
+config CHARGER_TPS65217
+ tristate "TPS65217 battery charger driver"
+ depends on MFD_TPS65217
+ help
+ Say Y here to enable support for battery charging with TPS65217
+ PMIC chips.
+
+config BATTERY_GAUGE_LTC2941
+ tristate "LTC2941/LTC2943 Battery Gauge Driver"
+ depends on I2C
+ help
+ Say Y here to include support for LTC2941 and LTC2943 Battery
+ Gauge IC. The driver reports the charge count continuously, and
+ measures the voltage and temperature every 10 seconds.
+
+config AB8500_BM
+ bool "AB8500 Battery Management Driver"
+ depends on AB8500_CORE && AB8500_GPADC
+ help
+ Say Y to include support for AB8500 battery management.
+
+config BATTERY_GOLDFISH
+ tristate "Goldfish battery driver"
+ depends on GOLDFISH || COMPILE_TEST
+ depends on HAS_IOMEM
+ help
+ Say Y to enable support for the battery and AC power in the
+ Goldfish emulator.
+
+config BATTERY_RT5033
+ tristate "RT5033 fuel gauge support"
+ depends on MFD_RT5033
+ help
+ This adds support for battery fuel gauge in Richtek RT5033 PMIC.
+ The fuelgauge calculates and determines the battery state of charge
+ according to battery open circuit voltage.
+
+config CHARGER_RT9455
+ tristate "Richtek RT9455 battery charger driver"
+ depends on I2C
+ depends on GPIOLIB || COMPILE_TEST
+ select REGMAP_I2C
+ help
+ Say Y to enable support for Richtek RT9455 battery charger.
+
+config AXP20X_POWER
+ tristate "AXP20x power supply driver"
+ depends on MFD_AXP20X
+ help
+ This driver provides support for the power supply features of
+ AXP20x PMIC.
+
+endif # POWER_SUPPLY
diff --git a/drivers/power/supply/Makefile b/drivers/power/supply/Makefile
new file mode 100644
index 0000000..36c599d
--- /dev/null
+++ b/drivers/power/supply/Makefile
@@ -0,0 +1,74 @@
+subdir-ccflags-$(CONFIG_POWER_SUPPLY_DEBUG) := -DDEBUG
+
+power_supply-y := power_supply_core.o
+power_supply-$(CONFIG_SYSFS) += power_supply_sysfs.o
+power_supply-$(CONFIG_LEDS_TRIGGERS) += power_supply_leds.o
+
+obj-$(CONFIG_POWER_SUPPLY) += power_supply.o
+obj-$(CONFIG_GENERIC_ADC_BATTERY) += generic-adc-battery.o
+
+obj-$(CONFIG_PDA_POWER) += pda_power.o
+obj-$(CONFIG_APM_POWER) += apm_power.o
+obj-$(CONFIG_AXP20X_POWER) += axp20x_usb_power.o
+obj-$(CONFIG_MAX8925_POWER) += max8925_power.o
+obj-$(CONFIG_WM831X_BACKUP) += wm831x_backup.o
+obj-$(CONFIG_WM831X_POWER) += wm831x_power.o
+obj-$(CONFIG_WM8350_POWER) += wm8350_power.o
+obj-$(CONFIG_TEST_POWER) += test_power.o
+
+obj-$(CONFIG_BATTERY_88PM860X) += 88pm860x_battery.o
+obj-$(CONFIG_BATTERY_ACT8945A) += act8945a_charger.o
+obj-$(CONFIG_BATTERY_DS2760) += ds2760_battery.o
+obj-$(CONFIG_BATTERY_DS2780) += ds2780_battery.o
+obj-$(CONFIG_BATTERY_DS2781) += ds2781_battery.o
+obj-$(CONFIG_BATTERY_DS2782) += ds2782_battery.o
+obj-$(CONFIG_BATTERY_GAUGE_LTC2941) += ltc2941-battery-gauge.o
+obj-$(CONFIG_BATTERY_GOLDFISH) += goldfish_battery.o
+obj-$(CONFIG_BATTERY_PMU) += pmu_battery.o
+obj-$(CONFIG_BATTERY_OLPC) += olpc_battery.o
+obj-$(CONFIG_BATTERY_TOSA) += tosa_battery.o
+obj-$(CONFIG_BATTERY_COLLIE) += collie_battery.o
+obj-$(CONFIG_BATTERY_IPAQ_MICRO) += ipaq_micro_battery.o
+obj-$(CONFIG_BATTERY_WM97XX) += wm97xx_battery.o
+obj-$(CONFIG_BATTERY_SBS) += sbs-battery.o
+obj-$(CONFIG_BATTERY_BQ27XXX) += bq27xxx_battery.o
+obj-$(CONFIG_BATTERY_BQ27XXX_I2C) += bq27xxx_battery_i2c.o
+obj-$(CONFIG_BATTERY_DA9030) += da9030_battery.o
+obj-$(CONFIG_BATTERY_DA9052) += da9052-battery.o
+obj-$(CONFIG_CHARGER_DA9150) += da9150-charger.o
+obj-$(CONFIG_BATTERY_DA9150) += da9150-fg.o
+obj-$(CONFIG_BATTERY_MAX17040) += max17040_battery.o
+obj-$(CONFIG_BATTERY_MAX17042) += max17042_battery.o
+obj-$(CONFIG_BATTERY_Z2) += z2_battery.o
+obj-$(CONFIG_BATTERY_RT5033) += rt5033_battery.o
+obj-$(CONFIG_CHARGER_RT9455) += rt9455_charger.o
+obj-$(CONFIG_BATTERY_S3C_ADC) += s3c_adc_battery.o
+obj-$(CONFIG_BATTERY_TWL4030_MADC) += twl4030_madc_battery.o
+obj-$(CONFIG_CHARGER_88PM860X) += 88pm860x_charger.o
+obj-$(CONFIG_CHARGER_PCF50633) += pcf50633-charger.o
+obj-$(CONFIG_BATTERY_JZ4740) += jz4740-battery.o
+obj-$(CONFIG_BATTERY_INTEL_MID) += intel_mid_battery.o
+obj-$(CONFIG_BATTERY_RX51) += rx51_battery.o
+obj-$(CONFIG_AB8500_BM) += ab8500_bmdata.o ab8500_charger.o ab8500_fg.o ab8500_btemp.o abx500_chargalg.o pm2301_charger.o
+obj-$(CONFIG_CHARGER_ISP1704) += isp1704_charger.o
+obj-$(CONFIG_CHARGER_MAX8903) += max8903_charger.o
+obj-$(CONFIG_CHARGER_TWL4030) += twl4030_charger.o
+obj-$(CONFIG_CHARGER_LP8727) += lp8727_charger.o
+obj-$(CONFIG_CHARGER_LP8788) += lp8788-charger.o
+obj-$(CONFIG_CHARGER_GPIO) += gpio-charger.o
+obj-$(CONFIG_CHARGER_MANAGER) += charger-manager.o
+obj-$(CONFIG_CHARGER_MAX14577) += max14577_charger.o
+obj-$(CONFIG_CHARGER_MAX77693) += max77693_charger.o
+obj-$(CONFIG_CHARGER_MAX8997) += max8997_charger.o
+obj-$(CONFIG_CHARGER_MAX8998) += max8998_charger.o
+obj-$(CONFIG_CHARGER_QCOM_SMBB) += qcom_smbb.o
+obj-$(CONFIG_CHARGER_BQ2415X) += bq2415x_charger.o
+obj-$(CONFIG_CHARGER_BQ24190) += bq24190_charger.o
+obj-$(CONFIG_CHARGER_BQ24257) += bq24257_charger.o
+obj-$(CONFIG_CHARGER_BQ24735) += bq24735-charger.o
+obj-$(CONFIG_CHARGER_BQ25890) += bq25890_charger.o
+obj-$(CONFIG_CHARGER_SMB347) += smb347-charger.o
+obj-$(CONFIG_CHARGER_TPS65090) += tps65090-charger.o
+obj-$(CONFIG_CHARGER_TPS65217) += tps65217_charger.o
+obj-$(CONFIG_AXP288_FUEL_GAUGE) += axp288_fuel_gauge.o
+obj-$(CONFIG_AXP288_CHARGER) += axp288_charger.o
diff --git a/drivers/power/ab8500_bmdata.c b/drivers/power/supply/ab8500_bmdata.c
similarity index 100%
rename from drivers/power/ab8500_bmdata.c
rename to drivers/power/supply/ab8500_bmdata.c
diff --git a/drivers/power/ab8500_btemp.c b/drivers/power/supply/ab8500_btemp.c
similarity index 99%
rename from drivers/power/ab8500_btemp.c
rename to drivers/power/supply/ab8500_btemp.c
index bf2e5dd..6ffdc18 100644
--- a/drivers/power/ab8500_btemp.c
+++ b/drivers/power/supply/ab8500_btemp.c
@@ -1095,7 +1095,7 @@
/* Create a work queue for the btemp */
di->btemp_wq =
- create_singlethread_workqueue("ab8500_btemp_wq");
+ alloc_workqueue("ab8500_btemp_wq", WQ_MEM_RECLAIM, 0);
if (di->btemp_wq == NULL) {
dev_err(di->dev, "failed to create work queue\n");
return -ENOMEM;
diff --git a/drivers/power/ab8500_charger.c b/drivers/power/supply/ab8500_charger.c
similarity index 99%
rename from drivers/power/ab8500_charger.c
rename to drivers/power/supply/ab8500_charger.c
index 30de5d4..5cee9aa 100644
--- a/drivers/power/ab8500_charger.c
+++ b/drivers/power/supply/ab8500_charger.c
@@ -3540,8 +3540,8 @@
di->usb_state.usb_current = -1;
/* Create a work queue for the charger */
- di->charger_wq =
- create_singlethread_workqueue("ab8500_charger_wq");
+ di->charger_wq = alloc_ordered_workqueue("ab8500_charger_wq",
+ WQ_MEM_RECLAIM);
if (di->charger_wq == NULL) {
dev_err(di->dev, "failed to create work queue\n");
return -ENOMEM;
diff --git a/drivers/power/ab8500_fg.c b/drivers/power/supply/ab8500_fg.c
similarity index 99%
rename from drivers/power/ab8500_fg.c
rename to drivers/power/supply/ab8500_fg.c
index 5a36cf8..2199f67 100644
--- a/drivers/power/ab8500_fg.c
+++ b/drivers/power/supply/ab8500_fg.c
@@ -245,13 +245,8 @@
*/
struct ab8500_fg *ab8500_fg_get(void)
{
- struct ab8500_fg *fg;
-
- if (list_empty(&ab8500_fg_list))
- return NULL;
-
- fg = list_first_entry(&ab8500_fg_list, struct ab8500_fg, node);
- return fg;
+ return list_first_entry_or_null(&ab8500_fg_list, struct ab8500_fg,
+ node);
}
/* Main battery properties */
@@ -3096,7 +3091,7 @@
ab8500_fg_discharge_state_to(di, AB8500_FG_DISCHARGE_INIT);
/* Create a work queue for running the FG algorithm */
- di->fg_wq = create_singlethread_workqueue("ab8500_fg_wq");
+ di->fg_wq = alloc_ordered_workqueue("ab8500_fg_wq", WQ_MEM_RECLAIM);
if (di->fg_wq == NULL) {
dev_err(di->dev, "failed to create work queue\n");
return -ENOMEM;
diff --git a/drivers/power/abx500_chargalg.c b/drivers/power/supply/abx500_chargalg.c
similarity index 99%
rename from drivers/power/abx500_chargalg.c
rename to drivers/power/supply/abx500_chargalg.c
index d9104b1..a4411d6 100644
--- a/drivers/power/abx500_chargalg.c
+++ b/drivers/power/supply/abx500_chargalg.c
@@ -2091,8 +2091,8 @@
abx500_chargalg_maintenance_timer_expired;
/* Create a work queue for the chargalg */
- di->chargalg_wq =
- create_singlethread_workqueue("abx500_chargalg_wq");
+ di->chargalg_wq = alloc_ordered_workqueue("abx500_chargalg_wq",
+ WQ_MEM_RECLAIM);
if (di->chargalg_wq == NULL) {
dev_err(di->dev, "failed to create work queue\n");
return -ENOMEM;
diff --git a/drivers/power/supply/act8945a_charger.c b/drivers/power/supply/act8945a_charger.c
new file mode 100644
index 0000000..d1eb2e3
--- /dev/null
+++ b/drivers/power/supply/act8945a_charger.c
@@ -0,0 +1,666 @@
+/*
+ * Power supply driver for the Active-semi ACT8945A PMIC
+ *
+ * Copyright (C) 2015 Atmel Corporation
+ *
+ * Author: Wenyou Yang <wenyou.yang@atmel.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ */
+#include <linux/interrupt.h>
+#include <linux/module.h>
+#include <linux/of.h>
+#include <linux/of_irq.h>
+#include <linux/platform_device.h>
+#include <linux/power_supply.h>
+#include <linux/regmap.h>
+#include <linux/gpio/consumer.h>
+
+static const char *act8945a_charger_model = "ACT8945A";
+static const char *act8945a_charger_manufacturer = "Active-semi";
+
+/**
+ * ACT8945A Charger Register Map
+ */
+
+/* 0x70: Reserved */
+#define ACT8945A_APCH_CFG 0x71
+#define ACT8945A_APCH_STATUS 0x78
+#define ACT8945A_APCH_CTRL 0x79
+#define ACT8945A_APCH_STATE 0x7A
+
+/* ACT8945A_APCH_CFG */
+#define APCH_CFG_OVPSET (0x3 << 0)
+#define APCH_CFG_OVPSET_6V6 (0x0 << 0)
+#define APCH_CFG_OVPSET_7V (0x1 << 0)
+#define APCH_CFG_OVPSET_7V5 (0x2 << 0)
+#define APCH_CFG_OVPSET_8V (0x3 << 0)
+#define APCH_CFG_PRETIMO (0x3 << 2)
+#define APCH_CFG_PRETIMO_40_MIN (0x0 << 2)
+#define APCH_CFG_PRETIMO_60_MIN (0x1 << 2)
+#define APCH_CFG_PRETIMO_80_MIN (0x2 << 2)
+#define APCH_CFG_PRETIMO_DISABLED (0x3 << 2)
+#define APCH_CFG_TOTTIMO (0x3 << 4)
+#define APCH_CFG_TOTTIMO_3_HOUR (0x0 << 4)
+#define APCH_CFG_TOTTIMO_4_HOUR (0x1 << 4)
+#define APCH_CFG_TOTTIMO_5_HOUR (0x2 << 4)
+#define APCH_CFG_TOTTIMO_DISABLED (0x3 << 4)
+#define APCH_CFG_SUSCHG (0x1 << 7)
+
+#define APCH_STATUS_CHGDAT BIT(0)
+#define APCH_STATUS_INDAT BIT(1)
+#define APCH_STATUS_TEMPDAT BIT(2)
+#define APCH_STATUS_TIMRDAT BIT(3)
+#define APCH_STATUS_CHGSTAT BIT(4)
+#define APCH_STATUS_INSTAT BIT(5)
+#define APCH_STATUS_TEMPSTAT BIT(6)
+#define APCH_STATUS_TIMRSTAT BIT(7)
+
+#define APCH_CTRL_CHGEOCOUT BIT(0)
+#define APCH_CTRL_INDIS BIT(1)
+#define APCH_CTRL_TEMPOUT BIT(2)
+#define APCH_CTRL_TIMRPRE BIT(3)
+#define APCH_CTRL_CHGEOCIN BIT(4)
+#define APCH_CTRL_INCON BIT(5)
+#define APCH_CTRL_TEMPIN BIT(6)
+#define APCH_CTRL_TIMRTOT BIT(7)
+
+#define APCH_STATE_ACINSTAT (0x1 << 1)
+#define APCH_STATE_CSTATE (0x3 << 4)
+#define APCH_STATE_CSTATE_SHIFT 4
+#define APCH_STATE_CSTATE_DISABLED 0x00
+#define APCH_STATE_CSTATE_EOC 0x01
+#define APCH_STATE_CSTATE_FAST 0x02
+#define APCH_STATE_CSTATE_PRE 0x03
+
+struct act8945a_charger {
+ struct power_supply *psy;
+ struct power_supply_desc desc;
+ struct regmap *regmap;
+ struct work_struct work;
+
+ bool init_done;
+ struct gpio_desc *lbo_gpio;
+ struct gpio_desc *chglev_gpio;
+};
+
+static int act8945a_get_charger_state(struct regmap *regmap, int *val)
+{
+ int ret;
+ unsigned int status, state;
+
+ ret = regmap_read(regmap, ACT8945A_APCH_STATUS, &status);
+ if (ret < 0)
+ return ret;
+
+ ret = regmap_read(regmap, ACT8945A_APCH_STATE, &state);
+ if (ret < 0)
+ return ret;
+
+ state &= APCH_STATE_CSTATE;
+ state >>= APCH_STATE_CSTATE_SHIFT;
+
+ switch (state) {
+ case APCH_STATE_CSTATE_PRE:
+ case APCH_STATE_CSTATE_FAST:
+ *val = POWER_SUPPLY_STATUS_CHARGING;
+ break;
+ case APCH_STATE_CSTATE_EOC:
+ if (status & APCH_STATUS_CHGDAT)
+ *val = POWER_SUPPLY_STATUS_FULL;
+ else
+ *val = POWER_SUPPLY_STATUS_CHARGING;
+ break;
+ case APCH_STATE_CSTATE_DISABLED:
+ default:
+ if (!(status & APCH_STATUS_INDAT))
+ *val = POWER_SUPPLY_STATUS_DISCHARGING;
+ else
+ *val = POWER_SUPPLY_STATUS_NOT_CHARGING;
+ break;
+ }
+
+ return 0;
+}
+
+static int act8945a_get_charge_type(struct regmap *regmap, int *val)
+{
+ int ret;
+ unsigned int status, state;
+
+ ret = regmap_read(regmap, ACT8945A_APCH_STATUS, &status);
+ if (ret < 0)
+ return ret;
+
+ ret = regmap_read(regmap, ACT8945A_APCH_STATE, &state);
+ if (ret < 0)
+ return ret;
+
+ state &= APCH_STATE_CSTATE;
+ state >>= APCH_STATE_CSTATE_SHIFT;
+
+ switch (state) {
+ case APCH_STATE_CSTATE_PRE:
+ *val = POWER_SUPPLY_CHARGE_TYPE_TRICKLE;
+ break;
+ case APCH_STATE_CSTATE_FAST:
+ *val = POWER_SUPPLY_CHARGE_TYPE_FAST;
+ break;
+ case APCH_STATE_CSTATE_EOC:
+ *val = POWER_SUPPLY_CHARGE_TYPE_NONE;
+ break;
+ case APCH_STATE_CSTATE_DISABLED:
+ default:
+ if (!(status & APCH_STATUS_INDAT))
+ *val = POWER_SUPPLY_CHARGE_TYPE_NONE;
+ else
+ *val = POWER_SUPPLY_CHARGE_TYPE_UNKNOWN;
+ break;
+ }
+
+ return 0;
+}
+
+static int act8945a_get_battery_health(struct regmap *regmap, int *val)
+{
+ int ret;
+ unsigned int status, state, config;
+
+ ret = regmap_read(regmap, ACT8945A_APCH_STATUS, &status);
+ if (ret < 0)
+ return ret;
+
+ ret = regmap_read(regmap, ACT8945A_APCH_CFG, &config);
+ if (ret < 0)
+ return ret;
+
+ ret = regmap_read(regmap, ACT8945A_APCH_STATE, &state);
+ if (ret < 0)
+ return ret;
+
+ state &= APCH_STATE_CSTATE;
+ state >>= APCH_STATE_CSTATE_SHIFT;
+
+ switch (state) {
+ case APCH_STATE_CSTATE_DISABLED:
+ if (config & APCH_CFG_SUSCHG) {
+ *val = POWER_SUPPLY_HEALTH_UNKNOWN;
+ } else if (status & APCH_STATUS_INDAT) {
+ if (!(status & APCH_STATUS_TEMPDAT))
+ *val = POWER_SUPPLY_HEALTH_OVERHEAT;
+ else if (status & APCH_STATUS_TIMRDAT)
+ *val = POWER_SUPPLY_HEALTH_SAFETY_TIMER_EXPIRE;
+ else
+ *val = POWER_SUPPLY_HEALTH_OVERVOLTAGE;
+ } else {
+ *val = POWER_SUPPLY_HEALTH_GOOD;
+ }
+ break;
+ case APCH_STATE_CSTATE_PRE:
+ case APCH_STATE_CSTATE_FAST:
+ case APCH_STATE_CSTATE_EOC:
+ default:
+ *val = POWER_SUPPLY_HEALTH_GOOD;
+ break;
+ }
+
+ return 0;
+}
+
+static int act8945a_get_capacity_level(struct act8945a_charger *charger,
+ struct regmap *regmap, int *val)
+{
+ int ret;
+ unsigned int status, state, config;
+ int lbo_level = gpiod_get_value(charger->lbo_gpio);
+
+ ret = regmap_read(regmap, ACT8945A_APCH_STATUS, &status);
+ if (ret < 0)
+ return ret;
+
+ ret = regmap_read(regmap, ACT8945A_APCH_CFG, &config);
+ if (ret < 0)
+ return ret;
+
+ ret = regmap_read(regmap, ACT8945A_APCH_STATE, &state);
+ if (ret < 0)
+ return ret;
+
+ state &= APCH_STATE_CSTATE;
+ state >>= APCH_STATE_CSTATE_SHIFT;
+
+ switch (state) {
+ case APCH_STATE_CSTATE_PRE:
+ *val = POWER_SUPPLY_CAPACITY_LEVEL_LOW;
+ break;
+ case APCH_STATE_CSTATE_FAST:
+ if (lbo_level)
+ *val = POWER_SUPPLY_CAPACITY_LEVEL_HIGH;
+ else
+ *val = POWER_SUPPLY_CAPACITY_LEVEL_LOW;
+ break;
+ case APCH_STATE_CSTATE_EOC:
+ if (status & APCH_STATUS_CHGDAT)
+ *val = POWER_SUPPLY_CAPACITY_LEVEL_FULL;
+ else
+ *val = POWER_SUPPLY_CAPACITY_LEVEL_NORMAL;
+ break;
+ case APCH_STATE_CSTATE_DISABLED:
+ default:
+ if (config & APCH_CFG_SUSCHG) {
+ *val = POWER_SUPPLY_CAPACITY_LEVEL_UNKNOWN;
+ } else {
+ *val = POWER_SUPPLY_CAPACITY_LEVEL_NORMAL;
+ if (!(status & APCH_STATUS_INDAT)) {
+ if (!lbo_level)
+ *val = POWER_SUPPLY_CAPACITY_LEVEL_CRITICAL;
+ }
+ }
+ break;
+ }
+
+ return 0;
+}
+
+#define MAX_CURRENT_USB_HIGH 450000
+#define MAX_CURRENT_USB_LOW 90000
+#define MAX_CURRENT_USB_PRE 45000
+/*
+ * Riset(K) = 2336 * (1V/Ichg(mA)) - 0.205
+ * Riset = 2.43K
+ */
+#define MAX_CURRENT_AC_HIGH 886527
+#define MAX_CURRENT_AC_LOW 117305
+#define MAX_CURRENT_AC_HIGH_PRE 88653
+#define MAX_CURRENT_AC_LOW_PRE 11731
+
+static int act8945a_get_current_max(struct act8945a_charger *charger,
+ struct regmap *regmap, int *val)
+{
+ int ret;
+ unsigned int status, state;
+ unsigned int acin_state;
+ int chgin_level = gpiod_get_value(charger->chglev_gpio);
+
+ ret = regmap_read(regmap, ACT8945A_APCH_STATUS, &status);
+ if (ret < 0)
+ return ret;
+
+ ret = regmap_read(regmap, ACT8945A_APCH_STATE, &state);
+ if (ret < 0)
+ return ret;
+
+ acin_state = (state & APCH_STATE_ACINSTAT) >> 1;
+
+ state &= APCH_STATE_CSTATE;
+ state >>= APCH_STATE_CSTATE_SHIFT;
+
+ switch (state) {
+ case APCH_STATE_CSTATE_PRE:
+ if (acin_state) {
+ if (chgin_level)
+ *val = MAX_CURRENT_AC_HIGH_PRE;
+ else
+ *val = MAX_CURRENT_AC_LOW_PRE;
+ } else {
+ *val = MAX_CURRENT_USB_PRE;
+ }
+ break;
+ case APCH_STATE_CSTATE_FAST:
+ if (acin_state) {
+ if (chgin_level)
+ *val = MAX_CURRENT_AC_HIGH;
+ else
+ *val = MAX_CURRENT_AC_LOW;
+ } else {
+ if (chgin_level)
+ *val = MAX_CURRENT_USB_HIGH;
+ else
+ *val = MAX_CURRENT_USB_LOW;
+ }
+ break;
+ case APCH_STATE_CSTATE_EOC:
+ case APCH_STATE_CSTATE_DISABLED:
+ default:
+ *val = 0;
+ break;
+ }
+
+ return 0;
+}
+
+static enum power_supply_property act8945a_charger_props[] = {
+ POWER_SUPPLY_PROP_STATUS,
+ POWER_SUPPLY_PROP_CHARGE_TYPE,
+ POWER_SUPPLY_PROP_TECHNOLOGY,
+ POWER_SUPPLY_PROP_HEALTH,
+ POWER_SUPPLY_PROP_CAPACITY_LEVEL,
+ POWER_SUPPLY_PROP_CURRENT_MAX,
+ POWER_SUPPLY_PROP_MODEL_NAME,
+ POWER_SUPPLY_PROP_MANUFACTURER
+};
+
+static int act8945a_charger_get_property(struct power_supply *psy,
+ enum power_supply_property prop,
+ union power_supply_propval *val)
+{
+ struct act8945a_charger *charger = power_supply_get_drvdata(psy);
+ struct regmap *regmap = charger->regmap;
+ int ret = 0;
+
+ switch (prop) {
+ case POWER_SUPPLY_PROP_STATUS:
+ ret = act8945a_get_charger_state(regmap, &val->intval);
+ break;
+ case POWER_SUPPLY_PROP_CHARGE_TYPE:
+ ret = act8945a_get_charge_type(regmap, &val->intval);
+ break;
+ case POWER_SUPPLY_PROP_TECHNOLOGY:
+ val->intval = POWER_SUPPLY_TECHNOLOGY_LION;
+ break;
+ case POWER_SUPPLY_PROP_HEALTH:
+ ret = act8945a_get_battery_health(regmap, &val->intval);
+ break;
+ case POWER_SUPPLY_PROP_CAPACITY_LEVEL:
+ ret = act8945a_get_capacity_level(charger,
+ regmap, &val->intval);
+ break;
+ case POWER_SUPPLY_PROP_CURRENT_MAX:
+ ret = act8945a_get_current_max(charger,
+ regmap, &val->intval);
+ break;
+ case POWER_SUPPLY_PROP_MODEL_NAME:
+ val->strval = act8945a_charger_model;
+ break;
+ case POWER_SUPPLY_PROP_MANUFACTURER:
+ val->strval = act8945a_charger_manufacturer;
+ break;
+ default:
+ return -EINVAL;
+ }
+
+ return ret;
+}
+
+static int act8945a_enable_interrupt(struct act8945a_charger *charger)
+{
+ struct regmap *regmap = charger->regmap;
+ unsigned char ctrl;
+ int ret;
+
+ ctrl = APCH_CTRL_CHGEOCOUT | APCH_CTRL_CHGEOCIN |
+ APCH_CTRL_INDIS | APCH_CTRL_INCON |
+ APCH_CTRL_TEMPOUT | APCH_CTRL_TEMPIN |
+ APCH_CTRL_TIMRPRE | APCH_CTRL_TIMRTOT;
+ ret = regmap_write(regmap, ACT8945A_APCH_CTRL, ctrl);
+ if (ret)
+ return ret;
+
+ ctrl = APCH_STATUS_CHGSTAT | APCH_STATUS_INSTAT |
+ APCH_STATUS_TEMPSTAT | APCH_STATUS_TIMRSTAT;
+ ret = regmap_write(regmap, ACT8945A_APCH_STATUS, ctrl);
+ if (ret)
+ return ret;
+
+ return 0;
+}
+
+static unsigned int act8945a_set_supply_type(struct act8945a_charger *charger,
+ unsigned int *type)
+{
+ unsigned int status, state;
+ int ret;
+
+ ret = regmap_read(charger->regmap, ACT8945A_APCH_STATUS, &status);
+ if (ret < 0)
+ return ret;
+
+ ret = regmap_read(charger->regmap, ACT8945A_APCH_STATE, &state);
+ if (ret < 0)
+ return ret;
+
+ if (status & APCH_STATUS_INDAT) {
+ if (state & APCH_STATE_ACINSTAT)
+ *type = POWER_SUPPLY_TYPE_MAINS;
+ else
+ *type = POWER_SUPPLY_TYPE_USB;
+ } else {
+ *type = POWER_SUPPLY_TYPE_BATTERY;
+ }
+
+ return 0;
+}
+
+static void act8945a_work(struct work_struct *work)
+{
+ struct act8945a_charger *charger =
+ container_of(work, struct act8945a_charger, work);
+
+ act8945a_set_supply_type(charger, &charger->desc.type);
+
+ power_supply_changed(charger->psy);
+}
+
+static irqreturn_t act8945a_status_changed(int irq, void *dev_id)
+{
+ struct act8945a_charger *charger = dev_id;
+
+ if (charger->init_done)
+ schedule_work(&charger->work);
+
+ return IRQ_HANDLED;
+}
+
+#define DEFAULT_TOTAL_TIME_OUT 3
+#define DEFAULT_PRE_TIME_OUT 40
+#define DEFAULT_INPUT_OVP_THRESHOLD 6600
+
+static int act8945a_charger_config(struct device *dev,
+ struct act8945a_charger *charger)
+{
+ struct device_node *np = dev->of_node;
+ struct regmap *regmap = charger->regmap;
+
+ u32 total_time_out;
+ u32 pre_time_out;
+ u32 input_voltage_threshold;
+ int err, ret;
+
+ unsigned int tmp;
+ unsigned int value = 0;
+
+ if (!np) {
+ dev_err(dev, "no charger of node\n");
+ return -EINVAL;
+ }
+
+ ret = regmap_read(regmap, ACT8945A_APCH_CFG, &tmp);
+ if (ret)
+ return ret;
+
+ if (tmp & APCH_CFG_SUSCHG) {
+ value |= APCH_CFG_SUSCHG;
+ dev_info(dev, "have been suspended\n");
+ }
+
+ charger->lbo_gpio = devm_gpiod_get_optional(dev, "active-semi,lbo",
+ GPIOD_IN);
+ if (IS_ERR(charger->lbo_gpio)) {
+ err = PTR_ERR(charger->lbo_gpio);
+ dev_err(dev, "unable to claim gpio \"lbo\": %d\n", err);
+ return err;
+ }
+
+ ret = devm_request_irq(dev, gpiod_to_irq(charger->lbo_gpio),
+ act8945a_status_changed,
+ (IRQF_TRIGGER_FALLING | IRQF_TRIGGER_RISING),
+ "act8945a_lbo_detect", charger);
+ if (ret)
+ dev_info(dev, "failed to request gpio \"lbo\" IRQ\n");
+
+ charger->chglev_gpio = devm_gpiod_get_optional(dev,
+ "active-semi,chglev",
+ GPIOD_IN);
+ if (IS_ERR(charger->chglev_gpio)) {
+ err = PTR_ERR(charger->chglev_gpio);
+ dev_err(dev, "unable to claim gpio \"chglev\": %d\n", err);
+ return err;
+ }
+
+ if (of_property_read_u32(np,
+ "active-semi,input-voltage-threshold-microvolt",
+ &input_voltage_threshold))
+ input_voltage_threshold = DEFAULT_INPUT_OVP_THRESHOLD;
+
+ if (of_property_read_u32(np,
+ "active-semi,precondition-timeout",
+ &pre_time_out))
+ pre_time_out = DEFAULT_PRE_TIME_OUT;
+
+ if (of_property_read_u32(np, "active-semi,total-timeout",
+ &total_time_out))
+ total_time_out = DEFAULT_TOTAL_TIME_OUT;
+
+ switch (input_voltage_threshold) {
+ case 8000:
+ value |= APCH_CFG_OVPSET_8V;
+ break;
+ case 7500:
+ value |= APCH_CFG_OVPSET_7V5;
+ break;
+ case 7000:
+ value |= APCH_CFG_OVPSET_7V;
+ break;
+ case 6600:
+ default:
+ value |= APCH_CFG_OVPSET_6V6;
+ break;
+ }
+
+ switch (pre_time_out) {
+ case 60:
+ value |= APCH_CFG_PRETIMO_60_MIN;
+ break;
+ case 80:
+ value |= APCH_CFG_PRETIMO_80_MIN;
+ break;
+ case 0:
+ value |= APCH_CFG_PRETIMO_DISABLED;
+ break;
+ case 40:
+ default:
+ value |= APCH_CFG_PRETIMO_40_MIN;
+ break;
+ }
+
+ switch (total_time_out) {
+ case 4:
+ value |= APCH_CFG_TOTTIMO_4_HOUR;
+ break;
+ case 5:
+ value |= APCH_CFG_TOTTIMO_5_HOUR;
+ break;
+ case 0:
+ value |= APCH_CFG_TOTTIMO_DISABLED;
+ break;
+ case 3:
+ default:
+ value |= APCH_CFG_TOTTIMO_3_HOUR;
+ break;
+ }
+
+ return regmap_write(regmap, ACT8945A_APCH_CFG, value);
+}
+
+static int act8945a_charger_probe(struct platform_device *pdev)
+{
+ struct act8945a_charger *charger;
+ struct power_supply_config psy_cfg = {};
+ int irq, ret;
+
+ charger = devm_kzalloc(&pdev->dev, sizeof(*charger), GFP_KERNEL);
+ if (!charger)
+ return -ENOMEM;
+
+ charger->regmap = dev_get_regmap(pdev->dev.parent, NULL);
+ if (!charger->regmap) {
+ dev_err(&pdev->dev, "Parent did not provide regmap\n");
+ return -EINVAL;
+ }
+
+ ret = act8945a_charger_config(&pdev->dev, charger);
+ if (ret)
+ return ret;
+
+ irq = of_irq_get(pdev->dev.of_node, 0);
+ if (irq == -EPROBE_DEFER) {
+ dev_err(&pdev->dev, "failed to find IRQ number\n");
+ return -EPROBE_DEFER;
+ }
+
+ ret = devm_request_irq(&pdev->dev, irq, act8945a_status_changed,
+ IRQF_TRIGGER_FALLING, "act8945a_interrupt",
+ charger);
+ if (ret) {
+ dev_err(&pdev->dev, "failed to request nIRQ pin IRQ\n");
+ return ret;
+ }
+
+ charger->desc.name = "act8945a-charger";
+ charger->desc.get_property = act8945a_charger_get_property;
+ charger->desc.properties = act8945a_charger_props;
+ charger->desc.num_properties = ARRAY_SIZE(act8945a_charger_props);
+
+ ret = act8945a_set_supply_type(charger, &charger->desc.type);
+ if (ret)
+ return -EINVAL;
+
+ psy_cfg.of_node = pdev->dev.of_node;
+ psy_cfg.drv_data = charger;
+
+ charger->psy = devm_power_supply_register(&pdev->dev,
+ &charger->desc,
+ &psy_cfg);
+ if (IS_ERR(charger->psy)) {
+ dev_err(&pdev->dev, "failed to register power supply\n");
+ return PTR_ERR(charger->psy);
+ }
+
+ platform_set_drvdata(pdev, charger);
+
+ INIT_WORK(&charger->work, act8945a_work);
+
+ ret = act8945a_enable_interrupt(charger);
+ if (ret)
+ return -EIO;
+
+ charger->init_done = true;
+
+ return 0;
+}
+
+static int act8945a_charger_remove(struct platform_device *pdev)
+{
+ struct act8945a_charger *charger = platform_get_drvdata(pdev);
+
+ charger->init_done = false;
+ cancel_work_sync(&charger->work);
+
+ return 0;
+}
+
+static struct platform_driver act8945a_charger_driver = {
+ .driver = {
+ .name = "act8945a-charger",
+ },
+ .probe = act8945a_charger_probe,
+ .remove = act8945a_charger_remove,
+};
+module_platform_driver(act8945a_charger_driver);
+
+MODULE_DESCRIPTION("Active-semi ACT8945A ActivePath charger driver");
+MODULE_AUTHOR("Wenyou Yang <wenyou.yang@atmel.com>");
+MODULE_LICENSE("GPL");
diff --git a/drivers/power/apm_power.c b/drivers/power/supply/apm_power.c
similarity index 100%
rename from drivers/power/apm_power.c
rename to drivers/power/supply/apm_power.c
diff --git a/drivers/power/axp20x_usb_power.c b/drivers/power/supply/axp20x_usb_power.c
similarity index 100%
rename from drivers/power/axp20x_usb_power.c
rename to drivers/power/supply/axp20x_usb_power.c
diff --git a/drivers/power/axp288_charger.c b/drivers/power/supply/axp288_charger.c
similarity index 99%
rename from drivers/power/axp288_charger.c
rename to drivers/power/supply/axp288_charger.c
index 4030eeb..75b8e0c 100644
--- a/drivers/power/axp288_charger.c
+++ b/drivers/power/supply/axp288_charger.c
@@ -23,7 +23,6 @@
#include <linux/usb/otg.h>
#include <linux/notifier.h>
#include <linux/power_supply.h>
-#include <linux/notifier.h>
#include <linux/property.h>
#include <linux/mfd/axp20x.h>
#include <linux/extcon.h>
diff --git a/drivers/power/axp288_fuel_gauge.c b/drivers/power/supply/axp288_fuel_gauge.c
similarity index 99%
rename from drivers/power/axp288_fuel_gauge.c
rename to drivers/power/supply/axp288_fuel_gauge.c
index 50c0110..5bdde69 100644
--- a/drivers/power/axp288_fuel_gauge.c
+++ b/drivers/power/supply/axp288_fuel_gauge.c
@@ -22,7 +22,6 @@
#include <linux/regmap.h>
#include <linux/jiffies.h>
#include <linux/interrupt.h>
-#include <linux/device.h>
#include <linux/workqueue.h>
#include <linux/mfd/axp20x.h>
#include <linux/platform_device.h>
diff --git a/drivers/power/bq2415x_charger.c b/drivers/power/supply/bq2415x_charger.c
similarity index 100%
rename from drivers/power/bq2415x_charger.c
rename to drivers/power/supply/bq2415x_charger.c
diff --git a/drivers/power/bq24190_charger.c b/drivers/power/supply/bq24190_charger.c
similarity index 100%
rename from drivers/power/bq24190_charger.c
rename to drivers/power/supply/bq24190_charger.c
diff --git a/drivers/power/bq24257_charger.c b/drivers/power/supply/bq24257_charger.c
similarity index 99%
rename from drivers/power/bq24257_charger.c
rename to drivers/power/supply/bq24257_charger.c
index 1fea2c7..6fc31bd 100644
--- a/drivers/power/bq24257_charger.c
+++ b/drivers/power/supply/bq24257_charger.c
@@ -1068,6 +1068,12 @@
return ret;
}
+ ret = bq24257_power_supply_init(bq);
+ if (ret < 0) {
+ dev_err(dev, "Failed to register power supply\n");
+ return ret;
+ }
+
ret = devm_request_threaded_irq(dev, client->irq, NULL,
bq24257_irq_handler_thread,
IRQF_TRIGGER_FALLING |
@@ -1078,12 +1084,6 @@
return ret;
}
- ret = bq24257_power_supply_init(bq);
- if (ret < 0) {
- dev_err(dev, "Failed to register power supply\n");
- return ret;
- }
-
ret = sysfs_create_group(&bq->charger->dev.kobj, &bq24257_attr_group);
if (ret < 0) {
dev_err(dev, "Can't create sysfs entries\n");
diff --git a/drivers/power/bq24735-charger.c b/drivers/power/supply/bq24735-charger.c
similarity index 92%
rename from drivers/power/bq24735-charger.c
rename to drivers/power/supply/bq24735-charger.c
index fa454c1..eb7783b 100644
--- a/drivers/power/bq24735-charger.c
+++ b/drivers/power/supply/bq24735-charger.c
@@ -25,7 +25,7 @@
#include <linux/kernel.h>
#include <linux/module.h>
#include <linux/of.h>
-#include <linux/of_gpio.h>
+#include <linux/gpio/consumer.h>
#include <linux/power_supply.h>
#include <linux/slab.h>
@@ -49,6 +49,7 @@
struct i2c_client *client;
struct bq24735_platform *pdata;
struct mutex lock;
+ struct gpio_desc *status_gpio;
bool charging;
};
@@ -177,12 +178,8 @@
static bool bq24735_charger_is_present(struct bq24735 *charger)
{
- struct bq24735_platform *pdata = charger->pdata;
- int ret;
-
- if (pdata->status_gpio_valid) {
- ret = gpio_get_value_cansleep(pdata->status_gpio);
- return ret ^= pdata->status_gpio_active_low == 0;
+ if (charger->status_gpio) {
+ return !gpiod_get_value_cansleep(charger->status_gpio);
} else {
int ac = 0;
@@ -201,8 +198,12 @@
static int bq24735_charger_is_charging(struct bq24735 *charger)
{
- int ret = bq24735_read_word(charger->client, BQ24735_CHG_OPT);
+ int ret;
+ if (!bq24735_charger_is_present(charger))
+ return 0;
+
+ ret = bq24735_read_word(charger->client, BQ24735_CHG_OPT);
if (ret < 0)
return ret;
@@ -304,7 +305,6 @@
struct device_node *np = client->dev.of_node;
u32 val;
int ret;
- enum of_gpio_flags flags;
pdata = devm_kzalloc(&client->dev, sizeof(*pdata), GFP_KERNEL);
if (!pdata) {
@@ -313,12 +313,6 @@
return NULL;
}
- pdata->status_gpio = of_get_named_gpio_flags(np, "ti,ac-detect-gpios",
- 0, &flags);
-
- if (flags & OF_GPIO_ACTIVE_LOW)
- pdata->status_gpio_active_low = 1;
-
ret = of_property_read_u32(np, "ti,charge-current", &val);
if (!ret)
pdata->charge_current = val;
@@ -392,21 +386,16 @@
i2c_set_clientdata(client, charger);
- if (gpio_is_valid(charger->pdata->status_gpio)) {
- ret = devm_gpio_request(&client->dev,
- charger->pdata->status_gpio,
- name);
- if (ret) {
- dev_err(&client->dev,
- "Failed GPIO request for GPIO %d: %d\n",
- charger->pdata->status_gpio, ret);
- }
-
- charger->pdata->status_gpio_valid = !ret;
+ charger->status_gpio = devm_gpiod_get_optional(&client->dev,
+ "ti,ac-detect",
+ GPIOD_IN);
+ if (IS_ERR(charger->status_gpio)) {
+ ret = PTR_ERR(charger->status_gpio);
+ dev_err(&client->dev, "Getting gpio failed: %d\n", ret);
+ return ret;
}
- if (!charger->pdata->status_gpio_valid
- || bq24735_charger_is_present(charger)) {
+ if (!charger->status_gpio || bq24735_charger_is_present(charger)) {
ret = bq24735_read_word(client, BQ24735_MANUFACTURER_ID);
if (ret < 0) {
dev_err(&client->dev, "Failed to read manufacturer id : %d\n",
diff --git a/drivers/power/bq25890_charger.c b/drivers/power/supply/bq25890_charger.c
similarity index 100%
rename from drivers/power/bq25890_charger.c
rename to drivers/power/supply/bq25890_charger.c
diff --git a/drivers/power/bq27xxx_battery.c b/drivers/power/supply/bq27xxx_battery.c
similarity index 96%
rename from drivers/power/bq27xxx_battery.c
rename to drivers/power/supply/bq27xxx_battery.c
index 323d05a..3b0dbc6 100644
--- a/drivers/power/bq27xxx_battery.c
+++ b/drivers/power/supply/bq27xxx_battery.c
@@ -39,6 +39,7 @@
#include <linux/device.h>
#include <linux/module.h>
+#include <linux/mutex.h>
#include <linux/param.h>
#include <linux/jiffies.h>
#include <linux/workqueue.h>
@@ -390,8 +391,35 @@
BQ27XXX_PROP(BQ27421, bq27421_battery_props),
};
+static DEFINE_MUTEX(bq27xxx_list_lock);
+static LIST_HEAD(bq27xxx_battery_devices);
+
+static int poll_interval_param_set(const char *val, const struct kernel_param *kp)
+{
+ struct bq27xxx_device_info *di;
+ int ret;
+
+ ret = param_set_uint(val, kp);
+ if (ret < 0)
+ return ret;
+
+ mutex_lock(&bq27xxx_list_lock);
+ list_for_each_entry(di, &bq27xxx_battery_devices, list) {
+ cancel_delayed_work_sync(&di->work);
+ schedule_delayed_work(&di->work, 0);
+ }
+ mutex_unlock(&bq27xxx_list_lock);
+
+ return ret;
+}
+
+static const struct kernel_param_ops param_ops_poll_interval = {
+ .get = param_get_uint,
+ .set = poll_interval_param_set,
+};
+
static unsigned int poll_interval = 360;
-module_param(poll_interval, uint, 0644);
+module_param_cb(poll_interval, ¶m_ops_poll_interval, &poll_interval, 0644);
MODULE_PARM_DESC(poll_interval,
"battery poll interval in seconds - 0 disables polling");
@@ -644,8 +672,9 @@
static int bq27xxx_battery_read_health(struct bq27xxx_device_info *di)
{
int flags;
+ bool has_singe_flag = di->chip == BQ27000 || di->chip == BQ27010;
- flags = bq27xxx_read(di, BQ27XXX_REG_FLAGS, false);
+ flags = bq27xxx_read(di, BQ27XXX_REG_FLAGS, has_singe_flag);
if (flags < 0) {
dev_err(di->dev, "error reading flag register:%d\n", flags);
return flags;
@@ -745,7 +774,7 @@
}
if (di->chip == BQ27000 || di->chip == BQ27010) {
- flags = bq27xxx_read(di, BQ27XXX_REG_FLAGS, false);
+ flags = bq27xxx_read(di, BQ27XXX_REG_FLAGS, true);
if (flags & BQ27000_FLAG_CHGS) {
dev_dbg(di->dev, "negative current!\n");
curr = -curr;
@@ -971,6 +1000,10 @@
bq27xxx_battery_update(di);
+ mutex_lock(&bq27xxx_list_lock);
+ list_add(&di->list, &bq27xxx_battery_devices);
+ mutex_unlock(&bq27xxx_list_lock);
+
return 0;
}
EXPORT_SYMBOL_GPL(bq27xxx_battery_setup);
@@ -989,6 +1022,10 @@
power_supply_unregister(di->bat);
+ mutex_lock(&bq27xxx_list_lock);
+ list_del(&di->list);
+ mutex_unlock(&bq27xxx_list_lock);
+
mutex_destroy(&di->lock);
}
EXPORT_SYMBOL_GPL(bq27xxx_battery_teardown);
diff --git a/drivers/power/bq27xxx_battery_i2c.c b/drivers/power/supply/bq27xxx_battery_i2c.c
similarity index 100%
rename from drivers/power/bq27xxx_battery_i2c.c
rename to drivers/power/supply/bq27xxx_battery_i2c.c
diff --git a/drivers/power/charger-manager.c b/drivers/power/supply/charger-manager.c
similarity index 100%
rename from drivers/power/charger-manager.c
rename to drivers/power/supply/charger-manager.c
diff --git a/drivers/power/collie_battery.c b/drivers/power/supply/collie_battery.c
similarity index 100%
rename from drivers/power/collie_battery.c
rename to drivers/power/supply/collie_battery.c
diff --git a/drivers/power/da9030_battery.c b/drivers/power/supply/da9030_battery.c
similarity index 100%
rename from drivers/power/da9030_battery.c
rename to drivers/power/supply/da9030_battery.c
diff --git a/drivers/power/da9052-battery.c b/drivers/power/supply/da9052-battery.c
similarity index 100%
rename from drivers/power/da9052-battery.c
rename to drivers/power/supply/da9052-battery.c
diff --git a/drivers/power/da9150-charger.c b/drivers/power/supply/da9150-charger.c
similarity index 100%
rename from drivers/power/da9150-charger.c
rename to drivers/power/supply/da9150-charger.c
diff --git a/drivers/power/da9150-fg.c b/drivers/power/supply/da9150-fg.c
similarity index 100%
rename from drivers/power/da9150-fg.c
rename to drivers/power/supply/da9150-fg.c
diff --git a/drivers/power/ds2760_battery.c b/drivers/power/supply/ds2760_battery.c
similarity index 98%
rename from drivers/power/ds2760_battery.c
rename to drivers/power/supply/ds2760_battery.c
index 80f73cc..1722568 100644
--- a/drivers/power/ds2760_battery.c
+++ b/drivers/power/supply/ds2760_battery.c
@@ -28,8 +28,8 @@
#include <linux/platform_device.h>
#include <linux/power_supply.h>
-#include "../w1/w1.h"
-#include "../w1/slaves/w1_ds2760.h"
+#include "../../w1/w1.h"
+#include "../../w1/slaves/w1_ds2760.h"
struct ds2760_device_info {
struct device *dev;
@@ -566,7 +566,8 @@
INIT_DELAYED_WORK(&di->monitor_work, ds2760_battery_work);
INIT_DELAYED_WORK(&di->set_charged_work,
ds2760_battery_set_charged_work);
- di->monitor_wqueue = create_singlethread_workqueue(dev_name(&pdev->dev));
+ di->monitor_wqueue = alloc_ordered_workqueue(dev_name(&pdev->dev),
+ WQ_MEM_RECLAIM);
if (!di->monitor_wqueue) {
retval = -ESRCH;
goto workqueue_failed;
diff --git a/drivers/power/ds2780_battery.c b/drivers/power/supply/ds2780_battery.c
similarity index 99%
rename from drivers/power/ds2780_battery.c
rename to drivers/power/supply/ds2780_battery.c
index d3743d0..1b3b6fa 100644
--- a/drivers/power/ds2780_battery.c
+++ b/drivers/power/supply/ds2780_battery.c
@@ -21,8 +21,8 @@
#include <linux/power_supply.h>
#include <linux/idr.h>
-#include "../w1/w1.h"
-#include "../w1/slaves/w1_ds2780.h"
+#include "../../w1/w1.h"
+#include "../../w1/slaves/w1_ds2780.h"
/* Current unit measurement in uA for a 1 milli-ohm sense resistor */
#define DS2780_CURRENT_UNITS 1563
diff --git a/drivers/power/ds2781_battery.c b/drivers/power/supply/ds2781_battery.c
similarity index 99%
rename from drivers/power/ds2781_battery.c
rename to drivers/power/supply/ds2781_battery.c
index c368002..cc01491 100644
--- a/drivers/power/ds2781_battery.c
+++ b/drivers/power/supply/ds2781_battery.c
@@ -19,8 +19,8 @@
#include <linux/power_supply.h>
#include <linux/idr.h>
-#include "../w1/w1.h"
-#include "../w1/slaves/w1_ds2781.h"
+#include "../../w1/w1.h"
+#include "../../w1/slaves/w1_ds2781.h"
/* Current unit measurement in uA for a 1 milli-ohm sense resistor */
#define DS2781_CURRENT_UNITS 1563
diff --git a/drivers/power/ds2782_battery.c b/drivers/power/supply/ds2782_battery.c
similarity index 100%
rename from drivers/power/ds2782_battery.c
rename to drivers/power/supply/ds2782_battery.c
diff --git a/drivers/power/generic-adc-battery.c b/drivers/power/supply/generic-adc-battery.c
similarity index 100%
rename from drivers/power/generic-adc-battery.c
rename to drivers/power/supply/generic-adc-battery.c
diff --git a/drivers/power/goldfish_battery.c b/drivers/power/supply/goldfish_battery.c
similarity index 100%
rename from drivers/power/goldfish_battery.c
rename to drivers/power/supply/goldfish_battery.c
diff --git a/drivers/power/gpio-charger.c b/drivers/power/supply/gpio-charger.c
similarity index 100%
rename from drivers/power/gpio-charger.c
rename to drivers/power/supply/gpio-charger.c
diff --git a/drivers/power/intel_mid_battery.c b/drivers/power/supply/intel_mid_battery.c
similarity index 99%
rename from drivers/power/intel_mid_battery.c
rename to drivers/power/supply/intel_mid_battery.c
index 9fa4acc..dc7feef 100644
--- a/drivers/power/intel_mid_battery.c
+++ b/drivers/power/supply/intel_mid_battery.c
@@ -689,8 +689,7 @@
/* initialize all required framework before enabling interrupts */
INIT_WORK(&pbi->handler, pmic_battery_handle_intrpt);
INIT_DELAYED_WORK(&pbi->monitor_battery, pmic_battery_monitor);
- pbi->monitor_wqueue =
- create_singlethread_workqueue(dev_name(dev));
+ pbi->monitor_wqueue = alloc_workqueue(dev_name(dev), WQ_MEM_RECLAIM, 0);
if (!pbi->monitor_wqueue) {
dev_err(dev, "%s(): wqueue init failed\n", __func__);
retval = -ESRCH;
diff --git a/drivers/power/ipaq_micro_battery.c b/drivers/power/supply/ipaq_micro_battery.c
similarity index 98%
rename from drivers/power/ipaq_micro_battery.c
rename to drivers/power/supply/ipaq_micro_battery.c
index 35b01c7..4af7b77 100644
--- a/drivers/power/ipaq_micro_battery.c
+++ b/drivers/power/supply/ipaq_micro_battery.c
@@ -235,7 +235,7 @@
return -ENOMEM;
mb->micro = dev_get_drvdata(pdev->dev.parent);
- mb->wq = create_singlethread_workqueue("ipaq-battery-wq");
+ mb->wq = alloc_workqueue("ipaq-battery-wq", WQ_MEM_RECLAIM, 0);
if (!mb->wq)
return -ENOMEM;
diff --git a/drivers/power/isp1704_charger.c b/drivers/power/supply/isp1704_charger.c
similarity index 100%
rename from drivers/power/isp1704_charger.c
rename to drivers/power/supply/isp1704_charger.c
diff --git a/drivers/power/jz4740-battery.c b/drivers/power/supply/jz4740-battery.c
similarity index 100%
rename from drivers/power/jz4740-battery.c
rename to drivers/power/supply/jz4740-battery.c
diff --git a/drivers/power/lp8727_charger.c b/drivers/power/supply/lp8727_charger.c
similarity index 100%
rename from drivers/power/lp8727_charger.c
rename to drivers/power/supply/lp8727_charger.c
diff --git a/drivers/power/lp8788-charger.c b/drivers/power/supply/lp8788-charger.c
similarity index 100%
rename from drivers/power/lp8788-charger.c
rename to drivers/power/supply/lp8788-charger.c
diff --git a/drivers/power/ltc2941-battery-gauge.c b/drivers/power/supply/ltc2941-battery-gauge.c
similarity index 100%
rename from drivers/power/ltc2941-battery-gauge.c
rename to drivers/power/supply/ltc2941-battery-gauge.c
diff --git a/drivers/power/max14577_charger.c b/drivers/power/supply/max14577_charger.c
similarity index 98%
rename from drivers/power/max14577_charger.c
rename to drivers/power/supply/max14577_charger.c
index a36bcaf..449fc56 100644
--- a/drivers/power/max14577_charger.c
+++ b/drivers/power/supply/max14577_charger.c
@@ -2,7 +2,7 @@
* max14577_charger.c - Battery charger driver for the Maxim 14577/77836
*
* Copyright (C) 2013,2014 Samsung Electronics
- * Krzysztof Kozlowski <k.kozlowski@samsung.com>
+ * Krzysztof Kozlowski <krzk@kernel.org>
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
@@ -643,6 +643,6 @@
};
module_platform_driver(max14577_charger_driver);
-MODULE_AUTHOR("Krzysztof Kozlowski <k.kozlowski@samsung.com>");
+MODULE_AUTHOR("Krzysztof Kozlowski <krzk@kernel.org>");
MODULE_DESCRIPTION("Maxim 14577/77836 charger driver");
MODULE_LICENSE("GPL");
diff --git a/drivers/power/max17040_battery.c b/drivers/power/supply/max17040_battery.c
similarity index 100%
rename from drivers/power/max17040_battery.c
rename to drivers/power/supply/max17040_battery.c
diff --git a/drivers/power/max17042_battery.c b/drivers/power/supply/max17042_battery.c
similarity index 100%
rename from drivers/power/max17042_battery.c
rename to drivers/power/supply/max17042_battery.c
diff --git a/drivers/power/max77693_charger.c b/drivers/power/supply/max77693_charger.c
similarity index 99%
rename from drivers/power/max77693_charger.c
rename to drivers/power/supply/max77693_charger.c
index 060cab5..6c78884 100644
--- a/drivers/power/max77693_charger.c
+++ b/drivers/power/supply/max77693_charger.c
@@ -2,7 +2,7 @@
* max77693_charger.c - Battery charger driver for the Maxim 77693
*
* Copyright (C) 2014 Samsung Electronics
- * Krzysztof Kozlowski <k.kozlowski@samsung.com>
+ * Krzysztof Kozlowski <krzk@kernel.org>
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
@@ -766,6 +766,6 @@
};
module_platform_driver(max77693_charger_driver);
-MODULE_AUTHOR("Krzysztof Kozlowski <k.kozlowski@samsung.com>");
+MODULE_AUTHOR("Krzysztof Kozlowski <krzk@kernel.org>");
MODULE_DESCRIPTION("Maxim 77693 charger driver");
MODULE_LICENSE("GPL");
diff --git a/drivers/power/max8903_charger.c b/drivers/power/supply/max8903_charger.c
similarity index 100%
rename from drivers/power/max8903_charger.c
rename to drivers/power/supply/max8903_charger.c
diff --git a/drivers/power/max8925_power.c b/drivers/power/supply/max8925_power.c
similarity index 100%
rename from drivers/power/max8925_power.c
rename to drivers/power/supply/max8925_power.c
diff --git a/drivers/power/max8997_charger.c b/drivers/power/supply/max8997_charger.c
similarity index 100%
rename from drivers/power/max8997_charger.c
rename to drivers/power/supply/max8997_charger.c
diff --git a/drivers/power/max8998_charger.c b/drivers/power/supply/max8998_charger.c
similarity index 100%
rename from drivers/power/max8998_charger.c
rename to drivers/power/supply/max8998_charger.c
diff --git a/drivers/power/olpc_battery.c b/drivers/power/supply/olpc_battery.c
similarity index 100%
rename from drivers/power/olpc_battery.c
rename to drivers/power/supply/olpc_battery.c
diff --git a/drivers/power/pcf50633-charger.c b/drivers/power/supply/pcf50633-charger.c
similarity index 100%
rename from drivers/power/pcf50633-charger.c
rename to drivers/power/supply/pcf50633-charger.c
diff --git a/drivers/power/pda_power.c b/drivers/power/supply/pda_power.c
similarity index 100%
rename from drivers/power/pda_power.c
rename to drivers/power/supply/pda_power.c
diff --git a/drivers/power/pm2301_charger.c b/drivers/power/supply/pm2301_charger.c
similarity index 99%
rename from drivers/power/pm2301_charger.c
rename to drivers/power/supply/pm2301_charger.c
index fb62ed3..78561b6 100644
--- a/drivers/power/pm2301_charger.c
+++ b/drivers/power/supply/pm2301_charger.c
@@ -1054,7 +1054,8 @@
pm2->ac_chg.external = true;
/* Create a work queue for the charger */
- pm2->charger_wq = create_singlethread_workqueue("pm2xxx_charger_wq");
+ pm2->charger_wq = alloc_ordered_workqueue("pm2xxx_charger_wq",
+ WQ_MEM_RECLAIM);
if (pm2->charger_wq == NULL) {
ret = -ENOMEM;
dev_err(pm2->dev, "failed to create work queue\n");
diff --git a/drivers/power/pm2301_charger.h b/drivers/power/supply/pm2301_charger.h
similarity index 100%
rename from drivers/power/pm2301_charger.h
rename to drivers/power/supply/pm2301_charger.h
diff --git a/drivers/power/pmu_battery.c b/drivers/power/supply/pmu_battery.c
similarity index 100%
rename from drivers/power/pmu_battery.c
rename to drivers/power/supply/pmu_battery.c
diff --git a/drivers/power/power_supply.h b/drivers/power/supply/power_supply.h
similarity index 100%
rename from drivers/power/power_supply.h
rename to drivers/power/supply/power_supply.h
diff --git a/drivers/power/power_supply_core.c b/drivers/power/supply/power_supply_core.c
similarity index 100%
rename from drivers/power/power_supply_core.c
rename to drivers/power/supply/power_supply_core.c
diff --git a/drivers/power/power_supply_leds.c b/drivers/power/supply/power_supply_leds.c
similarity index 100%
rename from drivers/power/power_supply_leds.c
rename to drivers/power/supply/power_supply_leds.c
diff --git a/drivers/power/power_supply_sysfs.c b/drivers/power/supply/power_supply_sysfs.c
similarity index 100%
rename from drivers/power/power_supply_sysfs.c
rename to drivers/power/supply/power_supply_sysfs.c
diff --git a/drivers/power/qcom_smbb.c b/drivers/power/supply/qcom_smbb.c
similarity index 100%
rename from drivers/power/qcom_smbb.c
rename to drivers/power/supply/qcom_smbb.c
diff --git a/drivers/power/rt5033_battery.c b/drivers/power/supply/rt5033_battery.c
similarity index 100%
rename from drivers/power/rt5033_battery.c
rename to drivers/power/supply/rt5033_battery.c
diff --git a/drivers/power/rt9455_charger.c b/drivers/power/supply/rt9455_charger.c
similarity index 100%
rename from drivers/power/rt9455_charger.c
rename to drivers/power/supply/rt9455_charger.c
diff --git a/drivers/power/rx51_battery.c b/drivers/power/supply/rx51_battery.c
similarity index 100%
rename from drivers/power/rx51_battery.c
rename to drivers/power/supply/rx51_battery.c
diff --git a/drivers/power/s3c_adc_battery.c b/drivers/power/supply/s3c_adc_battery.c
similarity index 100%
rename from drivers/power/s3c_adc_battery.c
rename to drivers/power/supply/s3c_adc_battery.c
diff --git a/drivers/power/sbs-battery.c b/drivers/power/supply/sbs-battery.c
similarity index 83%
rename from drivers/power/sbs-battery.c
rename to drivers/power/supply/sbs-battery.c
index 768b9fc..8bb2eb3 100644
--- a/drivers/power/sbs-battery.c
+++ b/drivers/power/supply/sbs-battery.c
@@ -26,7 +26,7 @@
#include <linux/i2c.h>
#include <linux/slab.h>
#include <linux/interrupt.h>
-#include <linux/gpio.h>
+#include <linux/gpio/consumer.h>
#include <linux/of.h>
#include <linux/stat.h>
@@ -41,6 +41,7 @@
REG_TIME_TO_EMPTY,
REG_TIME_TO_FULL,
REG_STATUS,
+ REG_CAPACITY_LEVEL,
REG_CYCLE_COUNT,
REG_SERIAL_NUMBER,
REG_REMAINING_CAPACITY,
@@ -68,6 +69,7 @@
#define MANUFACTURER_ACCESS_SLEEP 0x0011
/* battery status value bits */
+#define BATTERY_INITIALIZED 0x80
#define BATTERY_DISCHARGING 0x40
#define BATTERY_FULL_CHARGED 0x20
#define BATTERY_FULL_DISCHARGED 0x10
@@ -110,6 +112,8 @@
SBS_DATA(POWER_SUPPLY_PROP_TIME_TO_FULL_AVG, 0x13, 0, 65535),
[REG_STATUS] =
SBS_DATA(POWER_SUPPLY_PROP_STATUS, 0x16, 0, 65535),
+ [REG_CAPACITY_LEVEL] =
+ SBS_DATA(POWER_SUPPLY_PROP_CAPACITY_LEVEL, 0x16, 0, 65535),
[REG_CYCLE_COUNT] =
SBS_DATA(POWER_SUPPLY_PROP_CYCLE_COUNT, 0x17, 0, 65535),
[REG_DESIGN_CAPACITY] =
@@ -131,6 +135,7 @@
static enum power_supply_property sbs_properties[] = {
POWER_SUPPLY_PROP_STATUS,
+ POWER_SUPPLY_PROP_CAPACITY_LEVEL,
POWER_SUPPLY_PROP_HEALTH,
POWER_SUPPLY_PROP_PRESENT,
POWER_SUPPLY_PROP_TECHNOLOGY,
@@ -158,13 +163,13 @@
struct sbs_info {
struct i2c_client *client;
struct power_supply *power_supply;
- struct sbs_platform_data *pdata;
bool is_present;
- bool gpio_detect;
+ struct gpio_desc *gpio_detect;
bool enable_detection;
- int irq;
int last_state;
int poll_time;
+ u32 i2c_retry_count;
+ u32 poll_retry_count;
struct delayed_work work;
int ignore_changes;
};
@@ -179,8 +184,7 @@
s32 ret = 0;
int retries = 1;
- if (chip->pdata)
- retries = max(chip->pdata->i2c_retry_count + 1, 1);
+ retries = chip->i2c_retry_count;
while (retries > 0) {
ret = i2c_smbus_read_word_data(client, address);
@@ -207,10 +211,8 @@
int retries_length = 1, retries_block = 1;
u8 block_buffer[I2C_SMBUS_BLOCK_MAX + 1];
- if (chip->pdata) {
- retries_length = max(chip->pdata->i2c_retry_count + 1, 1);
- retries_block = max(chip->pdata->i2c_retry_count + 1, 1);
- }
+ retries_length = chip->i2c_retry_count;
+ retries_block = chip->i2c_retry_count;
/* Adapter needs to support these two functions */
if (!i2c_check_functionality(client->adapter,
@@ -274,8 +276,7 @@
s32 ret = 0;
int retries = 1;
- if (chip->pdata)
- retries = max(chip->pdata->i2c_retry_count + 1, 1);
+ retries = chip->i2c_retry_count;
while (retries > 0) {
ret = i2c_smbus_write_word_data(client, address,
@@ -302,32 +303,31 @@
s32 ret;
struct sbs_info *chip = i2c_get_clientdata(client);
- if (psp == POWER_SUPPLY_PROP_PRESENT &&
- chip->gpio_detect) {
- ret = gpio_get_value(chip->pdata->battery_detect);
- if (ret == chip->pdata->battery_detect_present)
- val->intval = 1;
- else
- val->intval = 0;
+ if (psp == POWER_SUPPLY_PROP_PRESENT && chip->gpio_detect) {
+ ret = gpiod_get_value_cansleep(chip->gpio_detect);
+ if (ret < 0)
+ return ret;
+ val->intval = ret;
chip->is_present = val->intval;
return ret;
}
- /* Write to ManufacturerAccess with
- * ManufacturerAccess command and then
- * read the status */
- ret = sbs_write_word_data(client, sbs_data[REG_MANUFACTURER_DATA].addr,
- MANUFACTURER_ACCESS_STATUS);
+ /*
+ * Write to ManufacturerAccess with ManufacturerAccess command
+ * and then read the status. Do not check for error on the write
+ * since not all batteries implement write access to this command,
+ * while others mandate it.
+ */
+ sbs_write_word_data(client, sbs_data[REG_MANUFACTURER_DATA].addr,
+ MANUFACTURER_ACCESS_STATUS);
+
+ ret = sbs_read_word_data(client, sbs_data[REG_MANUFACTURER_DATA].addr);
if (ret < 0) {
if (psp == POWER_SUPPLY_PROP_PRESENT)
val->intval = 0; /* battery removed */
return ret;
}
- ret = sbs_read_word_data(client, sbs_data[REG_MANUFACTURER_DATA].addr);
- if (ret < 0)
- return ret;
-
if (ret < sbs_data[REG_MANUFACTURER_DATA].min_value ||
ret > sbs_data[REG_MANUFACTURER_DATA].max_value) {
val->intval = 0;
@@ -377,8 +377,23 @@
if (ret >= sbs_data[reg_offset].min_value &&
ret <= sbs_data[reg_offset].max_value) {
val->intval = ret;
- if (psp != POWER_SUPPLY_PROP_STATUS)
+ if (psp == POWER_SUPPLY_PROP_CAPACITY_LEVEL) {
+ if (!(ret & BATTERY_INITIALIZED))
+ val->intval =
+ POWER_SUPPLY_CAPACITY_LEVEL_UNKNOWN;
+ else if (ret & BATTERY_FULL_CHARGED)
+ val->intval =
+ POWER_SUPPLY_CAPACITY_LEVEL_FULL;
+ else if (ret & BATTERY_FULL_DISCHARGED)
+ val->intval =
+ POWER_SUPPLY_CAPACITY_LEVEL_CRITICAL;
+ else
+ val->intval =
+ POWER_SUPPLY_CAPACITY_LEVEL_NORMAL;
return 0;
+ } else if (psp != POWER_SUPPLY_PROP_STATUS) {
+ return 0;
+ }
if (ret & BATTERY_FULL_CHARGED)
val->intval = POWER_SUPPLY_STATUS_FULL;
@@ -590,6 +605,7 @@
break;
case POWER_SUPPLY_PROP_STATUS:
+ case POWER_SUPPLY_PROP_CAPACITY_LEVEL:
case POWER_SUPPLY_PROP_CYCLE_COUNT:
case POWER_SUPPLY_PROP_VOLTAGE_NOW:
case POWER_SUPPLY_PROP_CURRENT_NOW:
@@ -661,8 +677,14 @@
static irqreturn_t sbs_irq(int irq, void *devid)
{
- struct power_supply *battery = devid;
+ struct sbs_info *chip = devid;
+ struct power_supply *battery = chip->power_supply;
+ int ret;
+ ret = gpiod_get_value_cansleep(chip->gpio_detect);
+ if (ret < 0)
+ return ret;
+ chip->is_present = ret;
power_supply_changed(battery);
return IRQ_HANDLED;
@@ -681,7 +703,7 @@
cancel_delayed_work_sync(&chip->work);
schedule_delayed_work(&chip->work, HZ);
- chip->poll_time = chip->pdata->poll_retry_count;
+ chip->poll_time = chip->poll_retry_count;
}
static void sbs_delayed_work(struct work_struct *work)
@@ -717,80 +739,6 @@
}
}
-#if defined(CONFIG_OF)
-
-#include <linux/of_device.h>
-#include <linux/of_gpio.h>
-
-static const struct of_device_id sbs_dt_ids[] = {
- { .compatible = "sbs,sbs-battery" },
- { .compatible = "ti,bq20z75" },
- { }
-};
-MODULE_DEVICE_TABLE(of, sbs_dt_ids);
-
-static struct sbs_platform_data *sbs_of_populate_pdata(
- struct i2c_client *client)
-{
- struct device_node *of_node = client->dev.of_node;
- struct sbs_platform_data *pdata = client->dev.platform_data;
- enum of_gpio_flags gpio_flags;
- int rc;
- u32 prop;
-
- /* verify this driver matches this device */
- if (!of_node)
- return NULL;
-
- /* if platform data is set, honor it */
- if (pdata)
- return pdata;
-
- /* first make sure at least one property is set, otherwise
- * it won't change behavior from running without pdata.
- */
- if (!of_get_property(of_node, "sbs,i2c-retry-count", NULL) &&
- !of_get_property(of_node, "sbs,poll-retry-count", NULL) &&
- !of_get_property(of_node, "sbs,battery-detect-gpios", NULL))
- goto of_out;
-
- pdata = devm_kzalloc(&client->dev, sizeof(struct sbs_platform_data),
- GFP_KERNEL);
- if (!pdata)
- goto of_out;
-
- rc = of_property_read_u32(of_node, "sbs,i2c-retry-count", &prop);
- if (!rc)
- pdata->i2c_retry_count = prop;
-
- rc = of_property_read_u32(of_node, "sbs,poll-retry-count", &prop);
- if (!rc)
- pdata->poll_retry_count = prop;
-
- if (!of_get_property(of_node, "sbs,battery-detect-gpios", NULL)) {
- pdata->battery_detect = -1;
- goto of_out;
- }
-
- pdata->battery_detect = of_get_named_gpio_flags(of_node,
- "sbs,battery-detect-gpios", 0, &gpio_flags);
-
- if (gpio_flags & OF_GPIO_ACTIVE_LOW)
- pdata->battery_detect_present = 0;
- else
- pdata->battery_detect_present = 1;
-
-of_out:
- return pdata;
-}
-#else
-static struct sbs_platform_data *sbs_of_populate_pdata(
- struct i2c_client *client)
-{
- return client->dev.platform_data;
-}
-#endif
-
static const struct power_supply_desc sbs_default_desc = {
.type = POWER_SUPPLY_TYPE_BATTERY,
.properties = sbs_properties,
@@ -819,13 +767,12 @@
if (!sbs_desc->name)
return -ENOMEM;
- chip = kzalloc(sizeof(struct sbs_info), GFP_KERNEL);
+ chip = devm_kzalloc(&client->dev, sizeof(struct sbs_info), GFP_KERNEL);
if (!chip)
return -ENOMEM;
chip->client = client;
chip->enable_detection = false;
- chip->gpio_detect = false;
psy_cfg.of_node = client->dev.of_node;
psy_cfg.drv_data = chip;
/* ignore first notification of external change, it is generated
@@ -834,11 +781,31 @@
chip->ignore_changes = 1;
chip->last_state = POWER_SUPPLY_STATUS_UNKNOWN;
- pdata = sbs_of_populate_pdata(client);
+ /* use pdata if available, fall back to DT properties,
+ * or hardcoded defaults if not
+ */
+ rc = of_property_read_u32(client->dev.of_node, "sbs,i2c-retry-count",
+ &chip->i2c_retry_count);
+ if (rc)
+ chip->i2c_retry_count = 0;
+
+ rc = of_property_read_u32(client->dev.of_node, "sbs,poll-retry-count",
+ &chip->poll_retry_count);
+ if (rc)
+ chip->poll_retry_count = 0;
if (pdata) {
- chip->gpio_detect = gpio_is_valid(pdata->battery_detect);
- chip->pdata = pdata;
+ chip->poll_retry_count = pdata->poll_retry_count;
+ chip->i2c_retry_count = pdata->i2c_retry_count;
+ }
+ chip->i2c_retry_count = chip->i2c_retry_count + 1;
+
+ chip->gpio_detect = devm_gpiod_get_optional(&client->dev,
+ "sbs,battery-detect", GPIOD_IN);
+ if (IS_ERR(chip->gpio_detect)) {
+ dev_err(&client->dev, "Failed to get gpio: %ld\n",
+ PTR_ERR(chip->gpio_detect));
+ return PTR_ERR(chip->gpio_detect);
}
i2c_set_clientdata(client, chip);
@@ -846,47 +813,26 @@
if (!chip->gpio_detect)
goto skip_gpio;
- rc = gpio_request(pdata->battery_detect, dev_name(&client->dev));
- if (rc) {
- dev_warn(&client->dev, "Failed to request gpio: %d\n", rc);
- chip->gpio_detect = false;
- goto skip_gpio;
- }
-
- rc = gpio_direction_input(pdata->battery_detect);
- if (rc) {
- dev_warn(&client->dev, "Failed to get gpio as input: %d\n", rc);
- gpio_free(pdata->battery_detect);
- chip->gpio_detect = false;
- goto skip_gpio;
- }
-
- irq = gpio_to_irq(pdata->battery_detect);
+ irq = gpiod_to_irq(chip->gpio_detect);
if (irq <= 0) {
dev_warn(&client->dev, "Failed to get gpio as irq: %d\n", irq);
- gpio_free(pdata->battery_detect);
- chip->gpio_detect = false;
goto skip_gpio;
}
- rc = request_irq(irq, sbs_irq,
+ rc = devm_request_threaded_irq(&client->dev, irq, NULL, sbs_irq,
IRQF_TRIGGER_RISING | IRQF_TRIGGER_FALLING,
- dev_name(&client->dev), chip->power_supply);
+ dev_name(&client->dev), chip);
if (rc) {
dev_warn(&client->dev, "Failed to request irq: %d\n", rc);
- gpio_free(pdata->battery_detect);
- chip->gpio_detect = false;
goto skip_gpio;
}
- chip->irq = irq;
-
skip_gpio:
/*
* Before we register, we might need to make sure we can actually talk
* to the battery.
*/
- if (!force_load) {
+ if (!(force_load || chip->gpio_detect)) {
rc = sbs_read_word_data(client, sbs_data[REG_STATUS].addr);
if (rc < 0) {
@@ -896,7 +842,7 @@
}
}
- chip->power_supply = power_supply_register(&client->dev, sbs_desc,
+ chip->power_supply = devm_power_supply_register(&client->dev, sbs_desc,
&psy_cfg);
if (IS_ERR(chip->power_supply)) {
dev_err(&client->dev,
@@ -915,13 +861,6 @@
return 0;
exit_psupply:
- if (chip->irq)
- free_irq(chip->irq, chip->power_supply);
- if (chip->gpio_detect)
- gpio_free(pdata->battery_detect);
-
- kfree(chip);
-
return rc;
}
@@ -929,18 +868,8 @@
{
struct sbs_info *chip = i2c_get_clientdata(client);
- if (chip->irq)
- free_irq(chip->irq, chip->power_supply);
- if (chip->gpio_detect)
- gpio_free(chip->pdata->battery_detect);
-
- power_supply_unregister(chip->power_supply);
-
cancel_delayed_work_sync(&chip->work);
- kfree(chip);
- chip = NULL;
-
return 0;
}
@@ -950,16 +879,16 @@
{
struct i2c_client *client = to_i2c_client(dev);
struct sbs_info *chip = i2c_get_clientdata(client);
- s32 ret;
if (chip->poll_time > 0)
cancel_delayed_work_sync(&chip->work);
- /* write to manufacturer access with sleep command */
- ret = sbs_write_word_data(client, sbs_data[REG_MANUFACTURER_DATA].addr,
+ /*
+ * Write to manufacturer access with sleep command.
+ * Support is manufacturer dependend, so ignore errors.
+ */
+ sbs_write_word_data(client, sbs_data[REG_MANUFACTURER_DATA].addr,
MANUFACTURER_ACCESS_SLEEP);
- if (chip->is_present && ret < 0)
- return ret;
return 0;
}
@@ -978,13 +907,20 @@
};
MODULE_DEVICE_TABLE(i2c, sbs_id);
+static const struct of_device_id sbs_dt_ids[] = {
+ { .compatible = "sbs,sbs-battery" },
+ { .compatible = "ti,bq20z75" },
+ { }
+};
+MODULE_DEVICE_TABLE(of, sbs_dt_ids);
+
static struct i2c_driver sbs_battery_driver = {
.probe = sbs_probe,
.remove = sbs_remove,
.id_table = sbs_id,
.driver = {
.name = "sbs-battery",
- .of_match_table = of_match_ptr(sbs_dt_ids),
+ .of_match_table = sbs_dt_ids,
.pm = SBS_PM_OPS,
},
};
diff --git a/drivers/power/smb347-charger.c b/drivers/power/supply/smb347-charger.c
similarity index 100%
rename from drivers/power/smb347-charger.c
rename to drivers/power/supply/smb347-charger.c
diff --git a/drivers/power/test_power.c b/drivers/power/supply/test_power.c
similarity index 100%
rename from drivers/power/test_power.c
rename to drivers/power/supply/test_power.c
diff --git a/drivers/power/tosa_battery.c b/drivers/power/supply/tosa_battery.c
similarity index 100%
rename from drivers/power/tosa_battery.c
rename to drivers/power/supply/tosa_battery.c
diff --git a/drivers/power/tps65090-charger.c b/drivers/power/supply/tps65090-charger.c
similarity index 100%
rename from drivers/power/tps65090-charger.c
rename to drivers/power/supply/tps65090-charger.c
diff --git a/drivers/power/tps65217_charger.c b/drivers/power/supply/tps65217_charger.c
similarity index 89%
rename from drivers/power/tps65217_charger.c
rename to drivers/power/supply/tps65217_charger.c
index 4c56e54..9fd019f 100644
--- a/drivers/power/tps65217_charger.c
+++ b/drivers/power/supply/tps65217_charger.c
@@ -46,6 +46,8 @@
int prev_ac_online;
struct task_struct *poll_task;
+
+ int irq;
};
static enum power_supply_property tps65217_ac_props[] = {
@@ -198,6 +200,7 @@
struct tps65217 *tps = dev_get_drvdata(pdev->dev.parent);
struct tps65217_charger *charger;
struct power_supply_config cfg = {};
+ int irq;
int ret;
dev_dbg(&pdev->dev, "%s\n", __func__);
@@ -221,18 +224,40 @@
return PTR_ERR(charger->ac);
}
+ irq = platform_get_irq_byname(pdev, "AC");
+ if (irq < 0)
+ irq = -ENXIO;
+ charger->irq = irq;
+
ret = tps65217_config_charger(charger);
if (ret < 0) {
dev_err(charger->dev, "charger config failed, err %d\n", ret);
return ret;
}
- charger->poll_task = kthread_run(tps65217_charger_poll_task,
- charger, "ktps65217charger");
- if (IS_ERR(charger->poll_task)) {
- ret = PTR_ERR(charger->poll_task);
- dev_err(charger->dev, "Unable to run kthread err %d\n", ret);
- return ret;
+ if (irq != -ENXIO) {
+ ret = devm_request_threaded_irq(&pdev->dev, irq, NULL,
+ tps65217_charger_irq,
+ 0, "tps65217-charger",
+ charger);
+ if (ret) {
+ dev_err(charger->dev,
+ "Unable to register irq %d err %d\n", irq,
+ ret);
+ return ret;
+ }
+
+ /* Check current state */
+ tps65217_charger_irq(irq, charger);
+ } else {
+ charger->poll_task = kthread_run(tps65217_charger_poll_task,
+ charger, "ktps65217charger");
+ if (IS_ERR(charger->poll_task)) {
+ ret = PTR_ERR(charger->poll_task);
+ dev_err(charger->dev,
+ "Unable to run kthread err %d\n", ret);
+ return ret;
+ }
}
return 0;
@@ -242,7 +267,8 @@
{
struct tps65217_charger *charger = platform_get_drvdata(pdev);
- kthread_stop(charger->poll_task);
+ if (charger->irq == -ENXIO)
+ kthread_stop(charger->poll_task);
return 0;
}
diff --git a/drivers/power/twl4030_charger.c b/drivers/power/supply/twl4030_charger.c
similarity index 100%
rename from drivers/power/twl4030_charger.c
rename to drivers/power/supply/twl4030_charger.c
diff --git a/drivers/power/twl4030_madc_battery.c b/drivers/power/supply/twl4030_madc_battery.c
similarity index 100%
rename from drivers/power/twl4030_madc_battery.c
rename to drivers/power/supply/twl4030_madc_battery.c
diff --git a/drivers/power/wm831x_backup.c b/drivers/power/supply/wm831x_backup.c
similarity index 100%
rename from drivers/power/wm831x_backup.c
rename to drivers/power/supply/wm831x_backup.c
diff --git a/drivers/power/wm831x_power.c b/drivers/power/supply/wm831x_power.c
similarity index 100%
rename from drivers/power/wm831x_power.c
rename to drivers/power/supply/wm831x_power.c
diff --git a/drivers/power/wm8350_power.c b/drivers/power/supply/wm8350_power.c
similarity index 100%
rename from drivers/power/wm8350_power.c
rename to drivers/power/supply/wm8350_power.c
diff --git a/drivers/power/wm97xx_battery.c b/drivers/power/supply/wm97xx_battery.c
similarity index 99%
rename from drivers/power/wm97xx_battery.c
rename to drivers/power/supply/wm97xx_battery.c
index c2f09ed..6285626 100644
--- a/drivers/power/wm97xx_battery.c
+++ b/drivers/power/supply/wm97xx_battery.c
@@ -1,6 +1,4 @@
/*
- * linux/drivers/power/wm97xx_battery.c
- *
* Battery measurement code for WM97xx
*
* based on tosa_battery.c
diff --git a/drivers/power/z2_battery.c b/drivers/power/supply/z2_battery.c
similarity index 99%
rename from drivers/power/z2_battery.c
rename to drivers/power/supply/z2_battery.c
index b201e3f..8a43b49 100644
--- a/drivers/power/z2_battery.c
+++ b/drivers/power/supply/z2_battery.c
@@ -317,7 +317,6 @@
static struct i2c_driver z2_batt_driver = {
.driver = {
.name = "z2-battery",
- .owner = THIS_MODULE,
.pm = Z2_BATTERY_PM_OPS
},
.probe = z2_batt_probe,
diff --git a/include/linux/power/bq24735-charger.h b/include/linux/power/bq24735-charger.h
index 6b750c1a..b04be59 100644
--- a/include/linux/power/bq24735-charger.h
+++ b/include/linux/power/bq24735-charger.h
@@ -28,10 +28,6 @@
const char *name;
- int status_gpio;
- int status_gpio_active_low;
- bool status_gpio_valid;
-
bool ext_control;
char **supplied_to;
diff --git a/include/linux/power/bq27xxx_battery.h b/include/linux/power/bq27xxx_battery.h
index b50c049..e30deb0 100644
--- a/include/linux/power/bq27xxx_battery.h
+++ b/include/linux/power/bq27xxx_battery.h
@@ -58,6 +58,7 @@
unsigned long last_update;
struct delayed_work work;
struct power_supply *bat;
+ struct list_head list;
struct mutex lock;
u8 *regs;
};
diff --git a/include/linux/power/sbs-battery.h b/include/linux/power/sbs-battery.h
index 2b0a9d9..519b8b4 100644
--- a/include/linux/power/sbs-battery.h
+++ b/include/linux/power/sbs-battery.h
@@ -26,17 +26,13 @@
/**
* struct sbs_platform_data - platform data for sbs devices
- * @battery_detect: GPIO which is used to detect battery presence
- * @battery_detect_present: gpio state when battery is present (0 / 1)
* @i2c_retry_count: # of times to retry on i2c IO failure
* @poll_retry_count: # of times to retry looking for new status after
* external change notification
*/
struct sbs_platform_data {
- int battery_detect;
- int battery_detect_present;
- int i2c_retry_count;
- int poll_retry_count;
+ u32 i2c_retry_count;
+ u32 poll_retry_count;
};
#endif