include/asm-x86/geode.h - kernel/msm-4.9 - Gitiles

 /*
  * AMD Geode definitions
  * Copyright (C) 2006, Advanced Micro Devices, Inc.
  *
  * This program is free software; you can redistribute it and/or
  * modify it under the terms of version 2 of the GNU General Public License
  * as published by the Free Software Foundation.
  */

 #ifndef _ASM_GEODE_H_
 #define _ASM_GEODE_H_

 #include <asm/processor.h>
 #include <linux/io.h>

 /* Generic southbridge functions */

 #define GEODE_DEV_PMS 0
 #define GEODE_DEV_ACPI 1
 #define GEODE_DEV_GPIO 2
 #define GEODE_DEV_MFGPT 3

 extern int geode_get_dev_base(unsigned int dev);

 /* Useful macros */
 #define geode_pms_base()	geode_get_dev_base(GEODE_DEV_PMS)
 #define geode_acpi_base()	geode_get_dev_base(GEODE_DEV_ACPI)
 #define geode_gpio_base()	geode_get_dev_base(GEODE_DEV_GPIO)
 #define geode_mfgpt_base()	geode_get_dev_base(GEODE_DEV_MFGPT)

 /* MSRS */

 #define MSR_GLIU_P2D_RO0	0x10000029

 #define MSR_LX_GLD_MSR_CONFIG	0x48002001
 #define MSR_LX_MSR_PADSEL	0x48002011	/* NOT 0x48000011; the data
 						 * sheet has the wrong value */
 #define MSR_GLCP_SYS_RSTPLL	0x4C000014
 #define MSR_GLCP_DOTPLL		0x4C000015

 #define MSR_LBAR_SMB		0x5140000B
 #define MSR_LBAR_GPIO		0x5140000C
 #define MSR_LBAR_MFGPT		0x5140000D
 #define MSR_LBAR_ACPI		0x5140000E
 #define MSR_LBAR_PMS		0x5140000F

 #define MSR_DIVIL_SOFT_RESET	0x51400017

 #define MSR_PIC_YSEL_LOW	0x51400020
 #define MSR_PIC_YSEL_HIGH	0x51400021
 #define MSR_PIC_ZSEL_LOW	0x51400022
 #define MSR_PIC_ZSEL_HIGH	0x51400023

 #define MSR_MFGPT_IRQ		0x51400028
 #define MSR_MFGPT_NR		0x51400029
 #define MSR_MFGPT_SETUP		0x5140002B

 #define MSR_LX_SPARE_MSR	0x80000011	/* DC-specific */

 #define MSR_GX_GLD_MSR_CONFIG	0xC0002001
 #define MSR_GX_MSR_PADSEL	0xC0002011

 /* Resource Sizes */

 #define LBAR_GPIO_SIZE		0xFF
 #define LBAR_MFGPT_SIZE		0x40
 #define LBAR_ACPI_SIZE		0x40
 #define LBAR_PMS_SIZE		0x80

 /* ACPI registers (PMS block) */

 /*
  * PM1_EN is only valid when VSA is enabled for 16 bit reads.
  * When VSA is not enabled, *always* read both PM1_STS and PM1_EN
  * with a 32 bit read at offset 0x0
  */

 #define PM1_STS			0x00
 #define PM1_EN			0x02
 #define PM1_CNT			0x08
 #define PM2_CNT			0x0C
 #define PM_TMR			0x10
 #define PM_GPE0_STS		0x18
 #define PM_GPE0_EN		0x1C

 /* PMC registers (PMS block) */

 #define PM_SSD			0x00
 #define PM_SCXA			0x04
 #define PM_SCYA			0x08
 #define PM_OUT_SLPCTL		0x0C
 #define PM_SCLK			0x10
 #define PM_SED			0x1
 #define PM_SCXD			0x18
 #define PM_SCYD			0x1C
 #define PM_IN_SLPCTL		0x20
 #define PM_WKD			0x30
 #define PM_WKXD			0x34
 #define PM_RD			0x38
 #define PM_WKXA			0x3C
 #define PM_FSD			0x40
 #define PM_TSD			0x44
 #define PM_PSD			0x48
 #define PM_NWKD			0x4C
 #define PM_AWKD			0x50
 #define PM_SSC			0x54

 /* VSA2 magic values */

 #define VSA_VRC_INDEX		0xAC1C
 #define VSA_VRC_DATA		0xAC1E
 #define VSA_VR_UNLOCK		0xFC53	/* unlock virtual register */
 #define VSA_VR_SIGNATURE	0x0003
 #define VSA_VR_MEM_SIZE		0x0200
 #define VSA_SIG			0x4132	/* signature is ascii 'VSA2' */

 /* GPIO */

 #define GPIO_OUTPUT_VAL		0x00
 #define GPIO_OUTPUT_ENABLE	0x04
 #define GPIO_OUTPUT_OPEN_DRAIN	0x08
 #define GPIO_OUTPUT_INVERT	0x0C
 #define GPIO_OUTPUT_AUX1	0x10
 #define GPIO_OUTPUT_AUX2	0x14
 #define GPIO_PULL_UP		0x18
 #define GPIO_PULL_DOWN		0x1C
 #define GPIO_INPUT_ENABLE	0x20
 #define GPIO_INPUT_INVERT	0x24
 #define GPIO_INPUT_FILTER	0x28
 #define GPIO_INPUT_EVENT_COUNT	0x2C
 #define GPIO_READ_BACK		0x30
 #define GPIO_INPUT_AUX1		0x34
 #define GPIO_EVENTS_ENABLE	0x38
 #define GPIO_LOCK_ENABLE	0x3C
 #define GPIO_POSITIVE_EDGE_EN	0x40
 #define GPIO_NEGATIVE_EDGE_EN	0x44
 #define GPIO_POSITIVE_EDGE_STS	0x48
 #define GPIO_NEGATIVE_EDGE_STS	0x4C

 #define GPIO_MAP_X		0xE0
 #define GPIO_MAP_Y		0xE4
 #define GPIO_MAP_Z		0xE8
 #define GPIO_MAP_W		0xEC

 static inline u32 geode_gpio(unsigned int nr)
 {
 	BUG_ON(nr > 28);
 	return 1 << nr;
 }

 extern void geode_gpio_set(u32, unsigned int);
 extern void geode_gpio_clear(u32, unsigned int);
 extern int geode_gpio_isset(u32, unsigned int);
 extern void geode_gpio_setup_event(unsigned int, int, int);
 extern void geode_gpio_set_irq(unsigned int, unsigned int);

 static inline void geode_gpio_event_irq(unsigned int gpio, int pair)
 {
 	geode_gpio_setup_event(gpio, pair, 0);
 }

 static inline void geode_gpio_event_pme(unsigned int gpio, int pair)
 {
 	geode_gpio_setup_event(gpio, pair, 1);
 }

 /* Specific geode tests */

 static inline int is_geode_gx(void)
 {
 	return ((boot_cpu_data.x86_vendor == X86_VENDOR_NSC) &&
 		(boot_cpu_data.x86 == 5) &&
 		(boot_cpu_data.x86_model == 5));
 }

 static inline int is_geode_lx(void)
 {
 	return ((boot_cpu_data.x86_vendor == X86_VENDOR_AMD) &&
 		(boot_cpu_data.x86 == 5) &&
 		(boot_cpu_data.x86_model == 10));
 }

 static inline int is_geode(void)
 {
 	return (is_geode_gx() || is_geode_lx());
 }

 /*
  * The VSA has virtual registers that we can query for a signature.
  */
 static inline int geode_has_vsa2(void)
 {
 	outw(VSA_VR_UNLOCK, VSA_VRC_INDEX);
 	outw(VSA_VR_SIGNATURE, VSA_VRC_INDEX);

 	return (inw(VSA_VRC_DATA) == VSA_SIG);
 }

 /* MFGPTs */

 #define MFGPT_MAX_TIMERS	8
 #define MFGPT_TIMER_ANY		(-1)

 #define MFGPT_DOMAIN_WORKING	1
 #define MFGPT_DOMAIN_STANDBY	2
 #define MFGPT_DOMAIN_ANY	(MFGPT_DOMAIN_WORKING | MFGPT_DOMAIN_STANDBY)

 #define MFGPT_CMP1		0
 #define MFGPT_CMP2		1

 #define MFGPT_EVENT_IRQ		0
 #define MFGPT_EVENT_NMI		1
 #define MFGPT_EVENT_RESET	3

 #define MFGPT_REG_CMP1		0
 #define MFGPT_REG_CMP2		2
 #define MFGPT_REG_COUNTER	4
 #define MFGPT_REG_SETUP		6

 #define MFGPT_SETUP_CNTEN	(1 << 15)
 #define MFGPT_SETUP_CMP2	(1 << 14)
 #define MFGPT_SETUP_CMP1	(1 << 13)
 #define MFGPT_SETUP_SETUP	(1 << 12)
 #define MFGPT_SETUP_STOPEN	(1 << 11)
 #define MFGPT_SETUP_EXTEN	(1 << 10)
 #define MFGPT_SETUP_REVEN	(1 << 5)
 #define MFGPT_SETUP_CLKSEL	(1 << 4)

 static inline void geode_mfgpt_write(int timer, u16 reg, u16 value)
 {
 	u32 base = geode_get_dev_base(GEODE_DEV_MFGPT);
 	outw(value, base + reg + (timer * 8));
 }

 static inline u16 geode_mfgpt_read(int timer, u16 reg)
 {
 	u32 base = geode_get_dev_base(GEODE_DEV_MFGPT);
 	return inw(base + reg + (timer * 8));
 }

 extern int geode_mfgpt_toggle_event(int timer, int cmp, int event, int enable);
 extern int geode_mfgpt_set_irq(int timer, int cmp, int irq, int enable);
 extern int geode_mfgpt_alloc_timer(int timer, int domain);

 #define geode_mfgpt_setup_irq(t, c, i) geode_mfgpt_set_irq((t), (c), (i), 1)
 #define geode_mfgpt_release_irq(t, c, i) geode_mfgpt_set_irq((t), (c), (i), 0)

 #ifdef CONFIG_GEODE_MFGPT_TIMER
 extern int __init mfgpt_timer_setup(void);
 #else
 static inline int mfgpt_timer_setup(void) { return 0; }
 #endif

 #endif
	/*
	* AMD Geode definitions
	* Copyright (C) 2006, Advanced Micro Devices, Inc.
	*
	* This program is free software; you can redistribute it and/or
	* modify it under the terms of version 2 of the GNU General Public License
	* as published by the Free Software Foundation.
	*/

	#ifndef _ASM_GEODE_H_
	#define _ASM_GEODE_H_

	#include <asm/processor.h>
	#include <linux/io.h>

	/* Generic southbridge functions */

	#define GEODE_DEV_PMS 0
	#define GEODE_DEV_ACPI 1
	#define GEODE_DEV_GPIO 2
	#define GEODE_DEV_MFGPT 3

	extern int geode_get_dev_base(unsigned int dev);

	/* Useful macros */
	#define geode_pms_base() geode_get_dev_base(GEODE_DEV_PMS)
	#define geode_acpi_base() geode_get_dev_base(GEODE_DEV_ACPI)
	#define geode_gpio_base() geode_get_dev_base(GEODE_DEV_GPIO)
	#define geode_mfgpt_base() geode_get_dev_base(GEODE_DEV_MFGPT)

	/* MSRS */

	#define MSR_GLIU_P2D_RO0 0x10000029

	#define MSR_LX_GLD_MSR_CONFIG 0x48002001
	#define MSR_LX_MSR_PADSEL 0x48002011 /* NOT 0x48000011; the data
	* sheet has the wrong value */
	#define MSR_GLCP_SYS_RSTPLL 0x4C000014
	#define MSR_GLCP_DOTPLL 0x4C000015

	#define MSR_LBAR_SMB 0x5140000B
	#define MSR_LBAR_GPIO 0x5140000C
	#define MSR_LBAR_MFGPT 0x5140000D
	#define MSR_LBAR_ACPI 0x5140000E
	#define MSR_LBAR_PMS 0x5140000F

	#define MSR_DIVIL_SOFT_RESET 0x51400017

	#define MSR_PIC_YSEL_LOW 0x51400020
	#define MSR_PIC_YSEL_HIGH 0x51400021
	#define MSR_PIC_ZSEL_LOW 0x51400022
	#define MSR_PIC_ZSEL_HIGH 0x51400023

	#define MSR_MFGPT_IRQ 0x51400028
	#define MSR_MFGPT_NR 0x51400029
	#define MSR_MFGPT_SETUP 0x5140002B

	#define MSR_LX_SPARE_MSR 0x80000011 /* DC-specific */

	#define MSR_GX_GLD_MSR_CONFIG 0xC0002001
	#define MSR_GX_MSR_PADSEL 0xC0002011

	/* Resource Sizes */

	#define LBAR_GPIO_SIZE 0xFF
	#define LBAR_MFGPT_SIZE 0x40
	#define LBAR_ACPI_SIZE 0x40
	#define LBAR_PMS_SIZE 0x80

	/* ACPI registers (PMS block) */

	/*
	* PM1_EN is only valid when VSA is enabled for 16 bit reads.
	* When VSA is not enabled, always read both PM1_STS and PM1_EN
	* with a 32 bit read at offset 0x0
	*/

	#define PM1_STS 0x00
	#define PM1_EN 0x02
	#define PM1_CNT 0x08
	#define PM2_CNT 0x0C
	#define PM_TMR 0x10
	#define PM_GPE0_STS 0x18
	#define PM_GPE0_EN 0x1C

	/* PMC registers (PMS block) */

	#define PM_SSD 0x00
	#define PM_SCXA 0x04
	#define PM_SCYA 0x08
	#define PM_OUT_SLPCTL 0x0C
	#define PM_SCLK 0x10
	#define PM_SED 0x1
	#define PM_SCXD 0x18
	#define PM_SCYD 0x1C
	#define PM_IN_SLPCTL 0x20
	#define PM_WKD 0x30
	#define PM_WKXD 0x34
	#define PM_RD 0x38
	#define PM_WKXA 0x3C
	#define PM_FSD 0x40
	#define PM_TSD 0x44
	#define PM_PSD 0x48
	#define PM_NWKD 0x4C
	#define PM_AWKD 0x50
	#define PM_SSC 0x54

	/* VSA2 magic values */

	#define VSA_VRC_INDEX 0xAC1C
	#define VSA_VRC_DATA 0xAC1E
	#define VSA_VR_UNLOCK 0xFC53 /* unlock virtual register */
	#define VSA_VR_SIGNATURE 0x0003
	#define VSA_VR_MEM_SIZE 0x0200
	#define VSA_SIG 0x4132 /* signature is ascii 'VSA2' */

	/* GPIO */

	#define GPIO_OUTPUT_VAL 0x00
	#define GPIO_OUTPUT_ENABLE 0x04
	#define GPIO_OUTPUT_OPEN_DRAIN 0x08
	#define GPIO_OUTPUT_INVERT 0x0C
	#define GPIO_OUTPUT_AUX1 0x10
	#define GPIO_OUTPUT_AUX2 0x14
	#define GPIO_PULL_UP 0x18
	#define GPIO_PULL_DOWN 0x1C
	#define GPIO_INPUT_ENABLE 0x20
	#define GPIO_INPUT_INVERT 0x24
	#define GPIO_INPUT_FILTER 0x28
	#define GPIO_INPUT_EVENT_COUNT 0x2C
	#define GPIO_READ_BACK 0x30
	#define GPIO_INPUT_AUX1 0x34
	#define GPIO_EVENTS_ENABLE 0x38
	#define GPIO_LOCK_ENABLE 0x3C
	#define GPIO_POSITIVE_EDGE_EN 0x40
	#define GPIO_NEGATIVE_EDGE_EN 0x44
	#define GPIO_POSITIVE_EDGE_STS 0x48
	#define GPIO_NEGATIVE_EDGE_STS 0x4C

	#define GPIO_MAP_X 0xE0
	#define GPIO_MAP_Y 0xE4
	#define GPIO_MAP_Z 0xE8
	#define GPIO_MAP_W 0xEC

	static inline u32 geode_gpio(unsigned int nr)
	{
	BUG_ON(nr > 28);
	return 1 << nr;
	}

	extern void geode_gpio_set(u32, unsigned int);
	extern void geode_gpio_clear(u32, unsigned int);
	extern int geode_gpio_isset(u32, unsigned int);
	extern void geode_gpio_setup_event(unsigned int, int, int);
	extern void geode_gpio_set_irq(unsigned int, unsigned int);

	static inline void geode_gpio_event_irq(unsigned int gpio, int pair)
	{
	geode_gpio_setup_event(gpio, pair, 0);
	}

	static inline void geode_gpio_event_pme(unsigned int gpio, int pair)
	{
	geode_gpio_setup_event(gpio, pair, 1);
	}

	/* Specific geode tests */

	static inline int is_geode_gx(void)
	{
	return ((boot_cpu_data.x86_vendor == X86_VENDOR_NSC) &&
	(boot_cpu_data.x86 == 5) &&
	(boot_cpu_data.x86_model == 5));
	}

	static inline int is_geode_lx(void)
	{
	return ((boot_cpu_data.x86_vendor == X86_VENDOR_AMD) &&
	(boot_cpu_data.x86 == 5) &&
	(boot_cpu_data.x86_model == 10));
	}

	static inline int is_geode(void)
	{
	return (is_geode_gx() \|\| is_geode_lx());
	}

	/*
	* The VSA has virtual registers that we can query for a signature.
	*/
	static inline int geode_has_vsa2(void)
	{
	outw(VSA_VR_UNLOCK, VSA_VRC_INDEX);
	outw(VSA_VR_SIGNATURE, VSA_VRC_INDEX);

	return (inw(VSA_VRC_DATA) == VSA_SIG);
	}

	/* MFGPTs */

	#define MFGPT_MAX_TIMERS 8
	#define MFGPT_TIMER_ANY (-1)

	#define MFGPT_DOMAIN_WORKING 1
	#define MFGPT_DOMAIN_STANDBY 2
	#define MFGPT_DOMAIN_ANY (MFGPT_DOMAIN_WORKING \| MFGPT_DOMAIN_STANDBY)

	#define MFGPT_CMP1 0
	#define MFGPT_CMP2 1

	#define MFGPT_EVENT_IRQ 0
	#define MFGPT_EVENT_NMI 1
	#define MFGPT_EVENT_RESET 3

	#define MFGPT_REG_CMP1 0
	#define MFGPT_REG_CMP2 2
	#define MFGPT_REG_COUNTER 4
	#define MFGPT_REG_SETUP 6

	#define MFGPT_SETUP_CNTEN (1 << 15)
	#define MFGPT_SETUP_CMP2 (1 << 14)
	#define MFGPT_SETUP_CMP1 (1 << 13)
	#define MFGPT_SETUP_SETUP (1 << 12)
	#define MFGPT_SETUP_STOPEN (1 << 11)
	#define MFGPT_SETUP_EXTEN (1 << 10)
	#define MFGPT_SETUP_REVEN (1 << 5)
	#define MFGPT_SETUP_CLKSEL (1 << 4)

	static inline void geode_mfgpt_write(int timer, u16 reg, u16 value)
	{
	u32 base = geode_get_dev_base(GEODE_DEV_MFGPT);
	outw(value, base + reg + (timer * 8));
	}

	static inline u16 geode_mfgpt_read(int timer, u16 reg)
	{
	u32 base = geode_get_dev_base(GEODE_DEV_MFGPT);
	return inw(base + reg + (timer * 8));
	}

	extern int geode_mfgpt_toggle_event(int timer, int cmp, int event, int enable);
	extern int geode_mfgpt_set_irq(int timer, int cmp, int irq, int enable);
	extern int geode_mfgpt_alloc_timer(int timer, int domain);

	#define geode_mfgpt_setup_irq(t, c, i) geode_mfgpt_set_irq((t), (c), (i), 1)
	#define geode_mfgpt_release_irq(t, c, i) geode_mfgpt_set_irq((t), (c), (i), 0)

	#ifdef CONFIG_GEODE_MFGPT_TIMER
	extern int __init mfgpt_timer_setup(void);
	#else
	static inline int mfgpt_timer_setup(void) { return 0; }
	#endif

	#endif